Zolltarifnummer 3824600000 80 - Sorbit, ausgenommen Waren der Unterposition 2905 44

Einfuhrkosten für 382460 schätzen

Nur eine Schätzung. Der Zollwert ist der Preis einschließlich Transport und Versicherung bis zur EU-Grenze. Verbrauchsteuern, andere Gebühren und herstellerbezogene Antidumpingzölle sind nicht berücksichtigt. Präferenzsätze gelten nur mit gültigem Ursprungsnachweis. Länderzugehörigkeit und Ausnahmen: TARIC, Stand November 2026.

Ausfuhrmaßnahmen für 3824600000

Was gilt, wenn diese Waren die EU verlassen: Ausfuhrkontrollen, Dual-Use- und andere Genehmigungen, Verbote je Bestimmungsland und die besondere Maßeinheit der Ausfuhranmeldung.

Kontrollen und Dokumente 6

	Bestimmungsland	Start	Zoll / Steuer	Rechtsgrundlage Maßnahmetyp
BY	Belarus BY	25-02-2025	Dokument nötig ohne Dokument verboten Details	Regelung0765/06 Export control 766
UA	Ukraine UA	25-02-2025	Dokument nötig ohne Dokument verboten Details	Regelung0692/14 Export control 709
UA	Ukraine UA	25-08-2022	Dokument nötig ohne Dokument verboten Details	Regelung0263/22 Export control 767
1014	OECD 1014	21-05-2026	Dokument nötig ohne Dokument verboten Details	Regelung1157/24 Export control - Waste 751
1008	All third countries 1008	21-05-2026	Dokument nötig ohne Dokument verboten Details	Regelung1157/24 Export control - Waste 751
RU	Russian Federation RU	27-09-2024	Dokument nötig ohne Dokument verboten Details	Regelung0833/14 Export control 709

Geschichte

Präferenzursprungsregeln für 3824600000

Was eine Ware erfüllen muss, um als Ursprungsware eines Partnerlandes zu gelten und den Präferenzzoll zu erhalten, je Abkommen. Wortlaut der Abkommen auf Englisch.

• EU-Algeria Association Agreement · Algerien

  EU-Lebanon Association Agreement · Libanon

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included:

  – The following of this heading: – – Prepared binders for foundry moulds or cores based on natural resinous products – – Naphthenic acids, their water-insoluble salts and their esters – – Sorbitol other than that of heading 2905 – – Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts – – Ion exchangers – – Getters for vacuum tubes – – Alkaline iron oxide for the purification of gas – – Ammoniacal gas liquors and spent oxide produced in coal gas purification – – Sulphonaphthenic acids, their water-insoluble salts and their esters – – Fusel oil and Dippel's oil – – Mixtures of salts having different anions – – Copying pastes with a basis of gelatin, whether or not on a paper or textile backing / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

  – Other / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

• EU-Egypt Association Agreement · Ägypten

  EU-Morocco Association Agreement · Marokko

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included:

  – The following of this heading:

  – – Prepared binders for foundry moulds or cores based on natural resinous products – – Naphthenic acids, their water-insoluble salts and their esters – – Sorbitol other than that of heading 2905 – – Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts – – Ion exchangers – – Getters for vacuum tubes – – Alkaline iron oxide for the purification of gas – – Ammoniacal gas liquors and spent oxide produced in coal gas purification – – Sulphonaphthenic acids, their water-insoluble salts and their esters – – Fusel oil and Dippel's oil – – Mixtures of salts having different anions – – Copying pastes with a basis of gelatin, whether or not on a paper or textile backing / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

• EU-Georgia DCFTA · Georgien

  EU-Moldova DCFTA · Republik Moldau

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included: The following of this heading: Prepared binders for foundry moulds or cores based on natural resinous products Naphthenic acids, their water-insoluble salts and their esters Sorbitol other than that of heading 2905 / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts Ion exchangers Getters for vacuum tubes Alkaline iron oxide for the purification of gas Ammoniacal gas liquors and spent oxide produced in coal gas purification Sulphonaphthenic acids, their water-insoluble salts and their esters Fusel oil and Dippel's oil Mixtures of salts having different anions Copying pastes with a basis of gelatin, whether or not on a paper or textile backing

• Autonomous Trade Preferences (Western Balkans) · Kosovo

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included:

  The following of this heading:

  - - / or: Prepared binders for foundry moulds or cores based on natural resinous products - - / or: Naphthenic acids, their water-insoluble salts and their esters - - / or: Sorbitol other than that of heading 2905 - - / or: Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts - - / or: Ion exchangers - - / or: Getters for vacuum tubes - - / or: Alkaline iron oxide for the purification of gas - - / or: Ammoniacal gas liquors and spent oxide produced in coal gas purification - - / or: Sulphonaphthenic acids, their water-insoluble salts and their esters - - / or: Fusel oil and Dippel's oil - - / or: Mixtures of salts having different anions - - / or: Copying pastes with a basis of gelatin, whether or not on a paper or textile backing / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

• EU-Canada CETA · Kanada

  A change from any other subheading, except from heading 11.01 through 11.08, 17.01, 17.02 or subheading 2905.44; or A change from heading 11.01 through 11.08, 17.01, 17.02 or subheading 2905.44, whether or not there is also a change from any other subheading, provided that the weight of non-originating material of heading 11.01 through 11.08, 17.01, 17.02 or subheading 2905.44 does not exceed 20 per cent of the net weight of the product.

• EU-Chile Association Agreement · Chile

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included: — The following of this heading: — — Prepared binders for foundry moulds or cores based on natural resinous products — — Naphthenic acids, their water-insoluble salts and their esters — — Sorbitol other than that of heading 2905 — — Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts — — Ion exchangers — — Getters for vacuum tubes — — Alkaline iron oxide for the purification of gas — — Ammoniacal gas liquors and spent oxide produced in coal gas purification — — Sulphonaphthenic acids, their water-insoluble salts and their esters — — Fusel oil and Dippel's oil — — Mixtures of salts having different anions — — Copying pastes with a basis of gelatin, whether or not on a paper or textile backing / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product — Other / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

• EU-Colombia/Peru/Ecuador Trade Agreement · Ecuador, Kolumbien, Peru

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included:

  – The following of this heading: – – Prepared binders for foundry moulds or cores based on natural resinous products – – Naphthenic acids, their water-insoluble salts and their esters – – Sorbitol other than that of heading 2905 / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 per cent of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

  – – Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts – – Ion exchangers – – Getters for vacuum tubes

  – – Alkaline iron oxide for the purification of gas – – Ammoniacal gas liquors and spent oxide produced in coal gas purification – – Sulphonaphthenic acids, their water-insoluble salts and their esters – – Fusel oil and Dippel's oil – – Mixtures of salts having different anions

  – – Copying pastes with a basis of gelatin, whether or not on a paper or textile backing

  Biodiesel: mixtures of mono alkyl esters of the fatty acids of the long chain of sub products of vegetable and animal oils. For greater certainty, the mono alkyl ester makes reference to methyl ester or ethyl ester of fatty acids / or: Manufacture from materials of any heading, except that of the product, and in which all the materials of Chapter 15 used are wholly obtained [20]

  Other / or: Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product [20] See Note 4 of Appendix 2 A.

• EEA/EFTA agreements (Switzerland, Norway, Liechtenstein, Faroe Islands) · Färöer, Liechtenstein, Norwegen, Schweiz

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included:

  The following of this heading: – – Prepared binders for foundry moulds or cores based on natural resinous products – – Naphthenic acids, their water-insoluble salts and their esters – – Sorbitol other than that of heading 2905 / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

  – – Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts – – Ion exchangers – – Getters for vacuum tubes

  – – Alkaline iron oxide for the purification of gas – – Ammoniacal gas liquors and spent oxide produced in coal gas purification – – Sulphonaphthenic acids, their water-insoluble salts and their esters – – Fusel oil and Dippel’s oil – – Mixtures of salts having different anions – – Copying pastes with a basis of gelatin, whether or not on a paper or textile backing

• EPA CARIFORUM

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included; residual products of the chemical or allied industries, not elsewhere specified or included: – The following of this heading Prepared binders for foundry moulds or cores based on natural resinous products Naphthenic acids, their water insoluble salts and their esters Sorbitol other than that of heading No 2905 / or: Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts Ion exchangers Getters for vacuum tubes Alkaline iron oxide for the purification of gas Ammoniacal gas liquors and spent oxide produced in coal gas purification Sulphonaphthenic acids, their water insoluble salts and their esters Fusel oil and Dippel's oil Mixtures of salts having different anions Copying pastes with a basis of gelatin, whether or not on a paper or textile backing – Other / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

• EPA Eastern and Southern Africa

  – The following of this heading: Prepared binders for foundry moulds or cores based on natural resinous products Naphthenic acids, their water insoluble salts and their esters Sorbitol other than that of heading No 2905 / or: Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

  Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts Ion exchangers Getters for vacuum tubes

  Alkaline iron oxide for the purification of gas Ammoniacal gas liquors and spent oxide produced in coal gas purification Sulphonaphthenic acids, their water insoluble salts and their esters Fusel oil and Dippel’s oil Mixtures of salts having different anions Copying pastes with a basis of gelatin, whether or not on a paper or textile backing

• EU Market Access Regulation (EPA) · Côte d’Ivoire, Ghana, Kamerun, Kenia

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included; residual products of the chemical or allied industries, not elsewhere specified or included:

  – The following of this heading: – – Prepared binders for foundry moulds or cores based on natural resinous products – – Naphthenic acids, their water insoluble salts and their esters – – Sorbitol other than that of heading No 2905 – – Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamine's; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts – – Ion exchangers – – Getters for vacuum tubes – – Alkaline iron oxide for the purification of gas – – Ammoniacal gas liquors and spent oxide produced in coal gas purification – – Sulphonaphthenic acids, their water insoluble salts and their esters – – Fusel oil and Dippel's oil – – Mixtures of salts having different anions – – Copying pastes with a basis of gelatine, whether or not on a paper or textile backing / or: Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

  – Other / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

• EPA Pacific · Fidschi, Papua-Neuguinea, Salomonen, Samoa

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included; residual products of the chemical or allied industries, not elsewhere specified or included: – The following of this heading: Prepared binders for foundry moulds or cores based on natural resinous products Naphthenic acids, their water insoluble salts and their esters Sorbitol other than that of heading No 2905 / or: Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts Ion exchangers Getters for vacuum tubes Alkaline iron oxide for the purification of gas Ammoniacal gas liquors and spent oxide produced in coal gas purification Sulphonaphthenic acids, their water insoluble salts and their esters Fusel oil and Dippel's oil Mixtures of salts having different anions Copying pastes with a basis of gelatin, whether or not on a paper or textile backing

• Generalised Scheme of Preferences (GSP, GSP+, EBA) · Armenien, Indien, Kenia, Pakistan, Salomonen, Samoa, Syrien, Vietnam

  Sorbitol other than that of sub-heading 2905 44 / or: (a) LDCs Manufacture from materials of any sub-heading, except that of the product and except materials of sub-heading 2905 44. However, materials of the same sub-heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product / or: (b) Other beneficiary countries Manufacture from materials of any sub-heading, except that of the product and except materials of sub-heading 2905 44. However, materials of the same sub-heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

• EU-Iceland FTA · Island

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included:

  – The following of this heading: – – Prepared binders for foundry moulds or cores based on natural resinous products – – Naphthenic acids, their water-insoluble salts and their esters – – Sorbitol other than that of heading 2905 – – Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts – – Ion exchangers – – Getters for vacuum tubes – – Alkaline iron oxide for the purification of gas – – Ammoniacal gas liquors and spent oxide produced in coal gas purification – – Sulphonaphthenic acids, their water-insoluble salts and their esters – – Fusel oil and Dippel's oil – – Mixtures of salts having different anions – – Copying pastes with a basis of gelatin, whether or not on a paper or textile backing / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

• EU-Jordan Association Agreement · Jordanien

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included: - The following of this heading: - - Prepared binders for foundry moulds or cores based on natural resinous products - - Naphthenic acids, their water-insoluble salts and their esters - - Sorbitol other than that of heading 2905 / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product - - Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts - - Ion exchangers - - Getters for vacuum tubes - - Alkaline iron oxide for the purification of gas - - Ammoniacal gas liquors and spent oxide produced in coal gas purification - - Sulphonaphthenic acids, their water-insoluble salts and their esters - - Fusel oil and Dippel's oil - - Mixtures of salts having different anions - - Copying pastes with a basis of gelatin, whether or not on a paper or textile backing - Other / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

• EU-Jordan Association Agreement (relaxed rules, 2016) · Jordanien

  Sorbitol other than that of sub-heading 290544 / or: Manufacture from materials of any sub-heading, except that of the product and except materials of sub-heading 290544. However, materials of the same sub-heading as the product may be used, provided that their total value does not exceed 20 % of the exworks price of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product

• EU-Japan EPA · Japan

  CTH except from heading 17.02 and subheadings 2905.43 and 2905.44.

• EU-Korea FTA · Südkorea

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the products

• EU-Central America Association Agreement

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included:

  — The following of this heading: – – Prepared binders for foundry moulds or cores based on natural resinous products – – Naphthenic acids, their water-insoluble salts and their esters – – Sorbitol other than that of heading 2905 – – Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts – – Ion exchangers – – Getters for vacuum tubes – – Alkaline iron oxide for the purification of gas – – Ammoniacal gas liquors and spent oxide produced in coal gas purification – – Sulphonaphthenic acids, their water-insoluble salts and their esters – – Fusel oil and Dippel's oil – – Mixtures of salts having different anions – – Copying pastes with a basis of gelatin, whether or not on a paper or textile backing / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

• EU-Mexico Global Agreement · Mexiko

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included; residual products of the chemical or allied industries; not elsewhere specified or included: The following of this heading: Prepared binders for foundry moulds or cores based on natural resinous products Naphthenic acids, their water insoluble salts and their esters Sorbitol other than that of heading No 2905 Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts Ion exchangers Getters for vacuum tubes Alkaline iron oxide for the purifcation of gas Ammoniacal gas liquors and spent oxide produced in coal gas purification Sulphonaphthenic acids, their water insoluble salts and their esters Fusel oil and Dippel's oil Mixtures of salts having different anions Copying pastes with a basis of gelatin, whether or not on a paper or textile backing / or: Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product — Other / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

• Pan-Euro-Mediterranean (PEM) Convention · Ägypten, Albanien, Andorra, Bosnien und Herzegowina, Färöer, Island, Kosovo, Liechtenstein, Montenegro, Nordmazedonien, Norwegen, Palästina, Schweiz, Türkei

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included:

  – The following of this heading: / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

  – – Prepared binders for foundry moulds or cores based on natural resinous products

  – – Naphthenic acids, their water-insoluble salts and their esters

  – – Sorbitol other than that of heading 2905

  – – Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts

  – – Ion exchangers

  – – Getters for vacuum tubes

  – – Alkaline iron oxide for the purification of gas

• EU-Palestine Interim Association Agreement · Palästina

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included; residual products of the chemical or allied industries, not elsewhere specified or included: - The following of this heading: Prepared binders for foundry moulds or cores based on natural resinous products Naphthenic acids, their water insoluble salts and their esters Sorbitol other than that of heading No 2905 / or: Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20% of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts Ion exchangers Getters for vacuum tubes Alkaline iron oxide for the purification of gas Ammoniacal gas liquors and spent oxide produced in coal gas purification Sulphonaphthenic acids, their water insoluble salts and their esters Fusel oil and Dippel's oil Mixtures of salts having different anions Copying pastes with a basis of gelatin, whether or not on a paper or textile backing - Other / or: Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product

• EU-Singapore FTA · Singapur

  Sorbitol other than that of subheading 290544 / or: Manufacture from materials of any subheading, except that of the product and except materials of subheading 290544. However, materials of the same subheading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

• EU-Tunisia Association Agreement · Tunesien

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included: The following of this heading: Prepared binders for foundry moulds or cores based on natural resinous products Naphthenic acids, their water-insoluble salts and their esters Sorbitol other than that of heading 2905 Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts Ion exchangers Getters for vacuum tubes Alkaline iron oxide for the purification of gas Ammoniacal gas liquors and spent oxide produced in coal gas purification Sulphonaphthenic acids, their water-insoluble salts and their esters Fusel oil and Dippel's oil Mixtures of salts having different anions Copying pastes with a basis of gelatin, whether or not on a paper or textile backing / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

• EU-Ukraine DCFTA · Ukraine

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included:

  – The following of this heading: – – Prepared binders for foundry moulds or cores based on natural resinous products – – Naphthenic acids, their water-insoluble salts and their esters – – Sorbitol other than that of heading 2905 / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

  – – Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts – – Ion exchangers – – Getters for vacuum tubes

  – – Alkaline iron oxide for the purification of gas – – Ammoniacal gas liquors and spent oxide produced in coal gas purification – – Sulphonaphthenic acids, their water-insoluble salts and their esters – – Fusel oil and Dippel's oil – – Mixtures of salts having different anions – – Copying pastes with a basis of gelatin, whether or not on a paper or textile backing

Quelle: Europäische Kommission, Access2Markets (CC BY 4.0, gekürzt). Maßgeblich ist der Text des Abkommens. Access2Markets

Anmerkungen und Erläuterungen zu 3824600000

Quellen: Kombinierte Nomenklatur 2026, Anhang I der Verordnung (EWG) Nr. 2658/87 (CELEX 32025R1926), und die Erläuterungen zur Kombinierten Nomenklatur (CELEX 02019XC0329(02)-20260213). Die Abschnitts- und Kapitelanmerkungen sind rechtsverbindlich, die Erläuterungen sind Auslegungshilfen. EUR-Lex

Beschränkungen und Hinweise für 382460

• Russland-Sanktionen: Einfuhrverbot Verordnung (EU) Nr. 833/2014, Anhang XXI 3824

  Art. 3i, Güter, die Russland erhebliche Einnahmen verschaffen

  Rechtsakt auf EUR-Lex lesen
• Russland-Sanktionen: Ausfuhrverbot Verordnung (EU) Nr. 833/2014, Anhang XXIII 3824

  Art. 3k, Güter, die zur Stärkung der industriellen Kapazitäten Russlands beitragen könnten

  Rechtsakt auf EUR-Lex lesen

Nur zur Orientierung. Prüfen Sie den Rechtsakt, bevor Sie sich auf einen Hinweis verlassen; Schwellenwerte, Ausnahmen und Genehmigungen sind nicht vollständig abgebildet.

Zollkontingente für 382460

• Ausgeschöpft 09.0884 Ursprung: Ländergruppe 5500

  Mercosur - Starch derivatives

  01.05.2026 – 31.12.2026

  0 Kilograms

  Restmenge (0 %)

  Volumen 66.667
• Kritisch 09.1949 Ursprung: Chile

  TRQ-CL-Starch and starch derivatives

  01.01.2026 – 31.12.2026

  300.000 Kilograms

  Restmenge (100 %)

  Volumen 300.000
• Offen 09.6725 Ursprung: Ukraine

  Mannitol D-glucitol (sorbitol) Sorbitol other than that of subheading 2905 44

  01.01.2026 – 31.12.2026

  150.000 Kilograms

  Restmenge (100 %)

  Volumen 150.000
• Offen 09.8210 Ursprung: Vietnam

  Mannitol, Sorbitol, Dextrins and other modified starches

  01.01.2026 – 31.12.2026

  1.916.400 Kilograms

  Restmenge (95,8 %)

  Volumen 2.000.000

Quelle: Europäische Kommission, Berichte zu Zollkontingenten, Stand 30.10.2026. Die Restmengen ändern sich täglich.

EU-Handel 2025 für 382460

Einfuhren aus Drittländern

1,4 Mio. €

1.284 t

Ausfuhren in Drittländer

21,3 Mio. €

Wichtigste Ursprungsländer nach Einfuhrwert

1. Türkei 590.870 €
2. Japan 191.169 €
3. Thailand 155.001 €
4. China 151.638 €
5. Vereinigte Staaten 106.788 €

KN8-Codes unterhalb dieses Codes: 4. Quelle: Eurostat, Comext, CC BY 4.0, aufbereitet von hscode.info. Vertraulicher Handel ist keinen Codes zugeordnet.

Einfuhrzoll im Vereinigten Königreich für 382460

• 6% + 13 GBP / 100 kg
• 6% + 19 GBP / 100 kg
• 8% + 31 GBP / 100 kg
• 8% + 44 GBP / 100 kg

Drittlandszollsätze aller britischen Warencodes unter dieser HS-Unterposition. Quelle: UK Department for Business and Trade, Stand 02.11.2026. Der britische Tarif weicht vom EU-Tarif ab.

Einfuhrumsatzsteuer in der EU

• Belgien 21 % ggf. 6 %
• Bulgarien 20 %
• Dänemark 25 %
• Deutschland 19 %
• Estland 24 %
• Finnland 25,5 %
• Frankreich 20 %
• Griechenland 24 % ggf. 6 %
• Irland 23 %
• Italien 22 %
• Kroatien 25 %
• Lettland 21 %
• Litauen 21 %
• Luxemburg 17 %
• Malta 18 %
• Niederlande 21 %
• Österreich 20 %
• Polen 23 %
• Portugal 23 %
• Rumänien 21 %
• Schweden 25 %
• Slowakei 23 %
• Slowenien 22 % ggf. 9,5 %
• Spanien 21 %
• Tschechien 21 %
• Ungarn 27 %
• Zypern 19 %

Normalsatz je Mitgliedstaat auf Zollwert, Zoll und Transportkosten bis zum Bestimmungsort. Ermäßigte Sätze hängen oft von Verwendung oder Abnehmer ab und gelten nur, wenn das Land sie für die Ware vorsieht. Quelle: Europäische Kommission, Taxes in Europe Database, Stand 02.11.2026.

Ursprungsregeln

Informationen

HS-Code Struktur

HS-Code Baumstruktur