Zolltarifnummer 3824990000 80 - andere

Präferenzursprungsregeln für 3824990000

Was eine Ware erfüllen muss, um als Ursprungsware eines Partnerlandes zu gelten und den Präferenzzoll zu erhalten, je Abkommen. Wortlaut der Abkommen auf Englisch.

• EU-Algeria Association Agreement · Algerien

  EU-Lebanon Association Agreement · Libanon

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included:

  – The following of this heading: – – Prepared binders for foundry moulds or cores based on natural resinous products – – Naphthenic acids, their water-insoluble salts and their esters – – Sorbitol other than that of heading 2905 – – Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts – – Ion exchangers – – Getters for vacuum tubes – – Alkaline iron oxide for the purification of gas – – Ammoniacal gas liquors and spent oxide produced in coal gas purification – – Sulphonaphthenic acids, their water-insoluble salts and their esters – – Fusel oil and Dippel's oil – – Mixtures of salts having different anions – – Copying pastes with a basis of gelatin, whether or not on a paper or textile backing / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

  – Other / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

• EU-Egypt Association Agreement · Ägypten

  EU-Morocco Association Agreement · Marokko

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included:

  – The following of this heading:

  – – Prepared binders for foundry moulds or cores based on natural resinous products – – Naphthenic acids, their water-insoluble salts and their esters – – Sorbitol other than that of heading 2905 – – Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts – – Ion exchangers – – Getters for vacuum tubes – – Alkaline iron oxide for the purification of gas – – Ammoniacal gas liquors and spent oxide produced in coal gas purification – – Sulphonaphthenic acids, their water-insoluble salts and their esters – – Fusel oil and Dippel's oil – – Mixtures of salts having different anions – – Copying pastes with a basis of gelatin, whether or not on a paper or textile backing / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

• EU-Georgia DCFTA · Georgien

  EU-Moldova DCFTA · Republik Moldau

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included: The following of this heading: Prepared binders for foundry moulds or cores based on natural resinous products Naphthenic acids, their water-insoluble salts and their esters Sorbitol other than that of heading 2905 / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts Ion exchangers Getters for vacuum tubes Alkaline iron oxide for the purification of gas Ammoniacal gas liquors and spent oxide produced in coal gas purification Sulphonaphthenic acids, their water-insoluble salts and their esters Fusel oil and Dippel's oil Mixtures of salts having different anions Copying pastes with a basis of gelatin, whether or not on a paper or textile backing

• Autonomous Trade Preferences (Western Balkans) · Kosovo

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included:

  The following of this heading:

  - - / or: Prepared binders for foundry moulds or cores based on natural resinous products - - / or: Naphthenic acids, their water-insoluble salts and their esters - - / or: Sorbitol other than that of heading 2905 - - / or: Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts - - / or: Ion exchangers - - / or: Getters for vacuum tubes - - / or: Alkaline iron oxide for the purification of gas - - / or: Ammoniacal gas liquors and spent oxide produced in coal gas purification - - / or: Sulphonaphthenic acids, their water-insoluble salts and their esters - - / or: Fusel oil and Dippel's oil - - / or: Mixtures of salts having different anions - - / or: Copying pastes with a basis of gelatin, whether or not on a paper or textile backing / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

• EU-Chile Association Agreement · Chile

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included: — The following of this heading: — — Prepared binders for foundry moulds or cores based on natural resinous products — — Naphthenic acids, their water-insoluble salts and their esters — — Sorbitol other than that of heading 2905 — — Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts — — Ion exchangers — — Getters for vacuum tubes — — Alkaline iron oxide for the purification of gas — — Ammoniacal gas liquors and spent oxide produced in coal gas purification — — Sulphonaphthenic acids, their water-insoluble salts and their esters — — Fusel oil and Dippel's oil — — Mixtures of salts having different anions — — Copying pastes with a basis of gelatin, whether or not on a paper or textile backing / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product — Other / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

• EU-Colombia/Peru/Ecuador Trade Agreement · Ecuador, Kolumbien, Peru

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included:

  – The following of this heading: – – Prepared binders for foundry moulds or cores based on natural resinous products – – Naphthenic acids, their water-insoluble salts and their esters – – Sorbitol other than that of heading 2905 / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 per cent of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

  – – Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts – – Ion exchangers – – Getters for vacuum tubes

  – – Alkaline iron oxide for the purification of gas – – Ammoniacal gas liquors and spent oxide produced in coal gas purification – – Sulphonaphthenic acids, their water-insoluble salts and their esters – – Fusel oil and Dippel's oil – – Mixtures of salts having different anions

  – – Copying pastes with a basis of gelatin, whether or not on a paper or textile backing

  Biodiesel: mixtures of mono alkyl esters of the fatty acids of the long chain of sub products of vegetable and animal oils. For greater certainty, the mono alkyl ester makes reference to methyl ester or ethyl ester of fatty acids / or: Manufacture from materials of any heading, except that of the product, and in which all the materials of Chapter 15 used are wholly obtained [20]

  Other / or: Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product [20] See Note 4 of Appendix 2 A.

• EEA/EFTA agreements (Switzerland, Norway, Liechtenstein, Faroe Islands) · Färöer, Liechtenstein, Norwegen, Schweiz

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included:

  The following of this heading: – – Prepared binders for foundry moulds or cores based on natural resinous products – – Naphthenic acids, their water-insoluble salts and their esters – – Sorbitol other than that of heading 2905 / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

  – – Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts – – Ion exchangers – – Getters for vacuum tubes

  – – Alkaline iron oxide for the purification of gas – – Ammoniacal gas liquors and spent oxide produced in coal gas purification – – Sulphonaphthenic acids, their water-insoluble salts and their esters – – Fusel oil and Dippel’s oil – – Mixtures of salts having different anions – – Copying pastes with a basis of gelatin, whether or not on a paper or textile backing

• EPA CARIFORUM

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included; residual products of the chemical or allied industries, not elsewhere specified or included: – The following of this heading Prepared binders for foundry moulds or cores based on natural resinous products Naphthenic acids, their water insoluble salts and their esters Sorbitol other than that of heading No 2905 / or: Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts Ion exchangers Getters for vacuum tubes Alkaline iron oxide for the purification of gas Ammoniacal gas liquors and spent oxide produced in coal gas purification Sulphonaphthenic acids, their water insoluble salts and their esters Fusel oil and Dippel's oil Mixtures of salts having different anions Copying pastes with a basis of gelatin, whether or not on a paper or textile backing – Other / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

• EPA Eastern and Southern Africa

  – The following of this heading: Prepared binders for foundry moulds or cores based on natural resinous products Naphthenic acids, their water insoluble salts and their esters Sorbitol other than that of heading No 2905 / or: Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

  Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts Ion exchangers Getters for vacuum tubes

  Alkaline iron oxide for the purification of gas Ammoniacal gas liquors and spent oxide produced in coal gas purification Sulphonaphthenic acids, their water insoluble salts and their esters Fusel oil and Dippel’s oil Mixtures of salts having different anions Copying pastes with a basis of gelatin, whether or not on a paper or textile backing

• EU Market Access Regulation (EPA) · Côte d’Ivoire, Ghana, Kamerun, Kenia

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included; residual products of the chemical or allied industries, not elsewhere specified or included:

  – The following of this heading: – – Prepared binders for foundry moulds or cores based on natural resinous products – – Naphthenic acids, their water insoluble salts and their esters – – Sorbitol other than that of heading No 2905 – – Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamine's; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts – – Ion exchangers – – Getters for vacuum tubes – – Alkaline iron oxide for the purification of gas – – Ammoniacal gas liquors and spent oxide produced in coal gas purification – – Sulphonaphthenic acids, their water insoluble salts and their esters – – Fusel oil and Dippel's oil – – Mixtures of salts having different anions – – Copying pastes with a basis of gelatine, whether or not on a paper or textile backing / or: Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

  – Other / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

• EPA Pacific · Fidschi, Papua-Neuguinea, Salomonen, Samoa

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included; residual products of the chemical or allied industries, not elsewhere specified or included: – The following of this heading: Prepared binders for foundry moulds or cores based on natural resinous products Naphthenic acids, their water insoluble salts and their esters Sorbitol other than that of heading No 2905 / or: Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts Ion exchangers Getters for vacuum tubes Alkaline iron oxide for the purification of gas Ammoniacal gas liquors and spent oxide produced in coal gas purification Sulphonaphthenic acids, their water insoluble salts and their esters Fusel oil and Dippel's oil Mixtures of salts having different anions Copying pastes with a basis of gelatin, whether or not on a paper or textile backing

• Generalised Scheme of Preferences (GSP, GSP+, EBA) · Armenien, Indien, Kenia, Pakistan, Salomonen, Samoa, Syrien, Vietnam

  Miscellaneous chemical products; except for: / or: (a) LDCs Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product / or: (b) Other beneficiary countries Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

• EU-Iceland FTA · Island

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included:

  – The following of this heading: – – Prepared binders for foundry moulds or cores based on natural resinous products – – Naphthenic acids, their water-insoluble salts and their esters – – Sorbitol other than that of heading 2905 – – Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts – – Ion exchangers – – Getters for vacuum tubes – – Alkaline iron oxide for the purification of gas – – Ammoniacal gas liquors and spent oxide produced in coal gas purification – – Sulphonaphthenic acids, their water-insoluble salts and their esters – – Fusel oil and Dippel's oil – – Mixtures of salts having different anions – – Copying pastes with a basis of gelatin, whether or not on a paper or textile backing / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

• EU-Jordan Association Agreement · Jordanien

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included: - The following of this heading: - - Prepared binders for foundry moulds or cores based on natural resinous products - - Naphthenic acids, their water-insoluble salts and their esters - - Sorbitol other than that of heading 2905 / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product - - Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts - - Ion exchangers - - Getters for vacuum tubes - - Alkaline iron oxide for the purification of gas - - Ammoniacal gas liquors and spent oxide produced in coal gas purification - - Sulphonaphthenic acids, their water-insoluble salts and their esters - - Fusel oil and Dippel's oil - - Mixtures of salts having different anions - - Copying pastes with a basis of gelatin, whether or not on a paper or textile backing - Other / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

• EU-Jordan Association Agreement (relaxed rules, 2016) · Jordanien

  Miscellaneous chemical products; except for: / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product

• EU-Korea FTA · Südkorea

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the products

• EU-Central America Association Agreement

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included:

  — The following of this heading: – – Prepared binders for foundry moulds or cores based on natural resinous products – – Naphthenic acids, their water-insoluble salts and their esters – – Sorbitol other than that of heading 2905 – – Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts – – Ion exchangers – – Getters for vacuum tubes – – Alkaline iron oxide for the purification of gas – – Ammoniacal gas liquors and spent oxide produced in coal gas purification – – Sulphonaphthenic acids, their water-insoluble salts and their esters – – Fusel oil and Dippel's oil – – Mixtures of salts having different anions – – Copying pastes with a basis of gelatin, whether or not on a paper or textile backing / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

• EU-Mexico Global Agreement · Mexiko

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included; residual products of the chemical or allied industries; not elsewhere specified or included: The following of this heading: Prepared binders for foundry moulds or cores based on natural resinous products Naphthenic acids, their water insoluble salts and their esters Sorbitol other than that of heading No 2905 Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts Ion exchangers Getters for vacuum tubes Alkaline iron oxide for the purifcation of gas Ammoniacal gas liquors and spent oxide produced in coal gas purification Sulphonaphthenic acids, their water insoluble salts and their esters Fusel oil and Dippel's oil Mixtures of salts having different anions Copying pastes with a basis of gelatin, whether or not on a paper or textile backing / or: Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product — Other / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

• Pan-Euro-Mediterranean (PEM) Convention · Ägypten, Albanien, Andorra, Bosnien und Herzegowina, Färöer, Island, Kosovo, Liechtenstein, Montenegro, Nordmazedonien, Norwegen, Palästina, Schweiz, Türkei

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included:

  – The following of this heading: / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

  – – Prepared binders for foundry moulds or cores based on natural resinous products

  – – Naphthenic acids, their water-insoluble salts and their esters

  – – Sorbitol other than that of heading 2905

  – – Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts

  – – Ion exchangers

  – – Getters for vacuum tubes

  – – Alkaline iron oxide for the purification of gas

• EU-Palestine Interim Association Agreement · Palästina

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included; residual products of the chemical or allied industries, not elsewhere specified or included: - The following of this heading: Prepared binders for foundry moulds or cores based on natural resinous products Naphthenic acids, their water insoluble salts and their esters Sorbitol other than that of heading No 2905 / or: Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20% of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts Ion exchangers Getters for vacuum tubes Alkaline iron oxide for the purification of gas Ammoniacal gas liquors and spent oxide produced in coal gas purification Sulphonaphthenic acids, their water insoluble salts and their esters Fusel oil and Dippel's oil Mixtures of salts having different anions Copying pastes with a basis of gelatin, whether or not on a paper or textile backing - Other / or: Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product

• EU-Singapore FTA · Singapur

  Miscellaneous chemical products; except for: / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

• EU-Tunisia Association Agreement · Tunesien

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included: The following of this heading: Prepared binders for foundry moulds or cores based on natural resinous products Naphthenic acids, their water-insoluble salts and their esters Sorbitol other than that of heading 2905 Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts Ion exchangers Getters for vacuum tubes Alkaline iron oxide for the purification of gas Ammoniacal gas liquors and spent oxide produced in coal gas purification Sulphonaphthenic acids, their water-insoluble salts and their esters Fusel oil and Dippel's oil Mixtures of salts having different anions Copying pastes with a basis of gelatin, whether or not on a paper or textile backing / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

• EU-Ukraine DCFTA · Ukraine

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included:

  – The following of this heading: – – Prepared binders for foundry moulds or cores based on natural resinous products – – Naphthenic acids, their water-insoluble salts and their esters – – Sorbitol other than that of heading 2905 / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

  – – Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts – – Ion exchangers – – Getters for vacuum tubes

  – – Alkaline iron oxide for the purification of gas – – Ammoniacal gas liquors and spent oxide produced in coal gas purification – – Sulphonaphthenic acids, their water-insoluble salts and their esters – – Fusel oil and Dippel's oil – – Mixtures of salts having different anions – – Copying pastes with a basis of gelatin, whether or not on a paper or textile backing

Quelle: Europäische Kommission, Access2Markets (CC BY 4.0, gekürzt). Maßgeblich ist der Text des Abkommens. Access2Markets

Anmerkungen und Erläuterungen zu 3824990000

Quellen: Kombinierte Nomenklatur 2026, Anhang I der Verordnung (EWG) Nr. 2658/87 (CELEX 32025R1926), und die Erläuterungen zur Kombinierten Nomenklatur (CELEX 02019XC0329(02)-20260213). Die Abschnitts- und Kapitelanmerkungen sind rechtsverbindlich, die Erläuterungen sind Auslegungshilfen. EUR-Lex

EU-Einreihungsverordnungen zu 3824990000

Verordnungen der Kommission, die bestimmte Waren in diesen Code eingereiht haben. Sie binden den Zoll in allen Mitgliedstaaten für gleiche Waren.

• 3824 99 92 31.07.2024 · Verordnung auf EUR-Lex
  The product is a liquid mixture of chemicals consisting by weight of the following:

  — 63 % of tetrahydro-1,1,2,3,3-pentamethylindane (THPMI; CAS RN 33704-59-5); and — 34 % of hexahydro-1,1,2,3,3-pentamethylindane (HHPMI; CAS RN 33704-60-8); and — 3 % of 1,1,2,3,3-pentamethylindane (PMI; CAS RN 1203-17-4). The mixture is obtained by catalytic hydrogenation of PMI (starting material). The products formed during the chemical reaction are THPMI (main product) and HHPMI (by-product). The mixture is intended for direct use, without any purification, in the production of (rac)-6,7-Dihydro-1,1,2,3,3-pentamethyl-4(5H)-indanone (DPMI; CAS RN 33704-61-9) through allylic oxidation of THPMI.

  Begründung

  Classification is determined by general rules 1 and 6 for the interpretation of the Combined Nomenclature, Note 1(a) to Chapter 29 and the wording of CN codes 3824 , 3824 99 and 3824 99 92 . Due to the significant concentration of HHPMI, the product is a mixture that cannot be considered as a separate chemically defined organic compound consisting of one molecular species within the meaning of Note 1(a) to Chapter 29 (see the Harmonized System Explanatory Notes to Chapter 29, General, point (A), first paragraph). The mixture is therefore excluded from classification in Chapter 29. Consequently, the mixture is to be classified under CN code 3824 99 92 as other preparations of the chemical or allied industries, not elsewhere specified or included.

• 3824 99 96 15.01.2024 · Verordnung auf EUR-Lex
  Zubereitung, bestehend zu 17 GHT aus dem polyzyklischen Peptid Nisin, vermischt mit 83 GHT Natriumchlorid.

  Das Natriumchlorid wird zunächst während einer Reinigungsphase bei der Herstellung von Nisin zugefügt. In einem späteren Schritt wird weiteres Natriumchlorid ausschließlich mit dem Ziel zugefügt, die Zubereitung mit einer definierten antibiotischen Wirkung zu standardisieren. Die Zubereitung wird als Lebensmittelzusatzstoff verwendet, um das Wachstum von Bakterien zu verhindern.

  Begründung

  Einreihung gemäß den Allgemeinen Vorschriften 1 und 6 für die Auslegung der Kombinierten Nomenklatur, Anmerkung 1 zu Kapitel 29 und dem Wortlaut der KN-Codes 3824 , 3824 99 und 3824 99 96 . Das in der Zubereitung enthaltene Natriumchlorid wird zu Standardisierungszwecken und nicht zu ernährungsphysiologischen Zwecken zugefügt. Die Zubereitung wird als technischer Lebensmittelzusatzstoff verwendet und gilt nicht als Mischung von chemischen Erzeugnissen und Lebensmitteln oder anderen Stoffen mit Nährwert im Sinne der Anmerkung 1 b) zu Kapitel 38. Daher ist eine Einreihung als Lebensmittelzubereitung in Position 2106 ausgeschlossen (siehe die HS-Erläuterungen zu Kapitel 38, Allgemeines, fünfter Absatz). Eine Einreihung in Kapitel 29 ist ausgeschlossen, da das Natriumchlorid absichtlich zugefügt wurde, um die Zubereitung für eine bestimmte Verwendung als Lebensmittelzusatzstoff mit einer definierten antibiotischen Wirkung besonders geeignet zu machen. Das Natriumchlorid stellt zudem keine Verunreinigung dar, die sich aus dem Herstellungsprozess ergibt (siehe Anmerkung 1 a) zu Kapitel 29 und die HS-Erläuterungen zu Kapitel 29, Allgemeines, Buchstabe A zweiter und fünfter Absatz). Folglich ist die Zubereitung als andere Zubereitung der chemischen Industrie oder verwandter Industrien, anderweit weder genannt noch inbegriffen, in den KN-Code 3824 99 96 einzureihen (siehe analog dazu auch das HS-Einreihungsavis 3824.99/3).

Britische verbindliche Zolltarifauskünfte zu 3824990000

Auskünfte von HM Revenue & Customs für Waren, deren britischer Warencode so beginnt wie dieser EU-Code. Der britische Zolltarif weicht vom EU-Tarif ab, für die EU sind sie daher nur eine Orientierung.

• UK 3824996400 Gültig vom 05.02.2025 bis 04.02.2028 · Auskunft 600012290 auf GOV.UK

  A powder blend consisting of maltodextrin, gum acacia and guar gum, used as an excipient in the formulation and manufacture of solid oral dose tablets. Supplied in bulk packaging. Packaging consists of polyethylene resin bag placed inside a protective outer container, typically a cardboard box.

  Begründung

  Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) Classification has been determined in accordance with the following: General Interpretative Rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 3824: Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included GIR 6 has been used to classify this product by the terms of heading 382499: Other than elsewhere specified within this heading. 8 Digit code 38249964: Products and preparations for pharmaceutical or surgical uses not elsewhere specified or included Also …

• UK 3824996400 Gültig vom 02.06.2025 bis 01.06.2028 · Auskunft 600013269 auf GOV.UK

  Excipient blend. The product is a blend of excipients used by pharmaceutical and dietary supplement companies in the formation and manufacture of oral dose tablet cores. There is also an identical product (Placebo DT1) which has the exact composition and is used internally within the company to make placebo tablets for coating trials on medicaments and supplement tablets. The composition of both products are :- Emcocel 90m nf/ep/jp, Lactose monohyd. nf/ep/jp/cp, Starch 1500 partially pregelatinized maize starch, Purified stearic acid (veg.) pwdr, Cabosil m-5p (col.silicon diox.) nf/ep/jp/cp. The materials are blended together in a main manufacturing facility under Good Manufacturing Practice (GMP) conditions in accordance with the prescribed work instructions. The finished product is bulk packaging in a free-flowing powder form. Packaging consists of a polyethylene resin bag placed inside a protective outer container, typically a cardboard box. This product is not considered a medicament of heading 3003 or 3004

  Begründung

  Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules GIR’s: GIR 1 has been used to classify this product by the terms of heading 3824: Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included. GIR 5b has been used to identify the type of packaging – Packaging consists of polyethylene resin bag placed inside a protective outer container, typically a cardboard box. GIR 6 has been used to classify this product by the terms of heading 382499: Other than elsewhere specified within this heading. 8-Digit code 38249964: Products and …

• UK 3824996500 Gültig vom 03.07.2024 bis 02.07.2027 · Auskunft 600010485 auf GOV.UK

  A reddish coloured, powdered sand additive used in the cold box core process to eliminate veining defects in metal castings. The product is added to dry sand prior to the addition of resin. The material is supplied in 25kg bags, 500kg bags, 750kg bags and 1000kg bags.

  Begründung

  Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3(1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect - a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 3824 - prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included. GIR 5(b) has been used to identify the type of packaging: supplied in 25kg bags, 500kg bags, 750kg bags and 1000kg bags. GIR 6 has been used to classify the goods to subheading level - 382499 - other than elsewhere specified. 8 Digit Code: 38249965 – other than elsewhere specified or included. Also classified in accordance with HSENS to …

Quelle: HM Revenue & Customs, Advance Tariff Rulings. Enthält Informationen des öffentlichen Sektors unter der Open Government Licence v3.0.

Beschränkungen und Hinweise für 382499

• Russland-Sanktionen: Einfuhrverbot Verordnung (EU) Nr. 833/2014, Anhang XXI 3824

  Art. 3i, Güter, die Russland erhebliche Einnahmen verschaffen

  Rechtsakt auf EUR-Lex lesen
• Russland-Sanktionen: Ausfuhrverbot Verordnung (EU) Nr. 833/2014, Anhang XXIII 3824

  Art. 3k, Güter, die zur Stärkung der industriellen Kapazitäten Russlands beitragen könnten

  Rechtsakt auf EUR-Lex lesen
• EUDR: entwaldungsfreie Produkte Verordnung (EU) 2023/1115, Anhang I 382499

  Rohstoff: Ölpalme. nur Ölpalmen (Elaeis spp.). nur ein Teil des Codes: Andere chemische Erzeugnisse und Zubereitungen der chemischen Industrie oder verwandter Industrien (einschlie.... gilt ab dem 30. Dezember 2027

  Rechtsakt auf EUR-Lex lesen
• Güter mit doppeltem Verwendungszweck Verordnung (EU) 2021/821, Anhang I 38249915

  Gilt nur für einen Teil der Waren unter diesem Code (Rechtsakt nennt 38249915).

  Möglicherweise Dual-Use; Eintrag 0B001f, 1C450 b1 in Anhang I prüfen (Korrelationstabelle unverbindlich)

  Rechtsakt auf EUR-Lex lesen
• Güter mit doppeltem Verwendungszweck Verordnung (EU) 2021/821, Anhang I 38249950

  Gilt nur für einen Teil der Waren unter diesem Code (Rechtsakt nennt 38249950).

  Möglicherweise Dual-Use; Eintrag 1C350 14, 1C350 24, 1C350 40, 1C350 41, 1C450 b1 in Anhang I prüfen (Korrelationstabelle unverbindlich)

  Rechtsakt auf EUR-Lex lesen
• Güter mit doppeltem Verwendungszweck Verordnung (EU) 2021/821, Anhang I 38249955

  Gilt nur für einen Teil der Waren unter diesem Code (Rechtsakt nennt 38249955).

  Möglicherweise Dual-Use; Eintrag 1C450 b1 in Anhang I prüfen (Korrelationstabelle unverbindlich)

  Rechtsakt auf EUR-Lex lesen
• Güter mit doppeltem Verwendungszweck Verordnung (EU) 2021/821, Anhang I 38249986

  Gilt nur für einen Teil der Waren unter diesem Code (Rechtsakt nennt 38249986).

  Möglicherweise Dual-Use; Eintrag 1C350 3, 1C450 b1 in Anhang I prüfen (Korrelationstabelle unverbindlich)

  Rechtsakt auf EUR-Lex lesen
• Güter mit doppeltem Verwendungszweck Verordnung (EU) 2021/821, Anhang I 38249992

  Gilt nur für einen Teil der Waren unter diesem Code (Rechtsakt nennt 38249992).

  Möglicherweise Dual-Use; Eintrag 1C111, 1C233, 8C001, 1C350 1, 1C350 2, 1C350 3, 1C350 4, 1C350 5, 1C350 6, 1C350 7, 1C350 8, 1C350 9, 1C350 10, 1C350 11, 1C350 12, 1C350 13, 1C350 14, 1C350 15, 1C350 16, 1C350 17, 1C350 18, 1C350 19, 1C350 20, 1C350 21, 1C350 22, 1C350 23, 1C350 24, 1C350 25, 1C350 26, 1C350 27, 1C350 28, 1C350 29, 1C350 30, 1C350 31, 1C350 32, 1C350 33, 1C350 34, 1C350 35, 1C350 36, 1C350 37, 1C350 38, 1C350 39, 1C350 40, 1C350 41, 1C350 42, 1C350 43, 1C350 44, 1C350 45, 1C350 46, 1C350 47, 1C350 48, 1C350 49, 1C350 50, 1C350 51, 1C350 52, 1C350 53, 1C350 54, 1C450 b1, 1C350 55, 1C350 56, 1C350 57, 1C350 58, 1C350 59, 1C350 60, 1C350 61, 1C350 62, 1C350 63 in Anhang I prüfen (Korrelationstabelle unverbindlich)

  Rechtsakt auf EUR-Lex lesen
• Güter mit doppeltem Verwendungszweck Verordnung (EU) 2021/821, Anhang I 38249993

  Gilt nur für einen Teil der Waren unter diesem Code (Rechtsakt nennt 38249993).

  Möglicherweise Dual-Use; Eintrag 1C107, 1C111, 1C233, 8C001, 1C350 1, 1C350 2, 1C350 3, 1C350 4, 1C350 5, 1C350 6, 1C350 7, 1C350 8, 1C350 9, 1C350 10, 1C350 11, 1C350 12, 1C350 13, 1C350 14, 1C350 15, 1C350 16, 1C350 17, 1C350 18, 1C350 19, 1C350 20, 1C350 21, 1C350 22, 1C350 23, 1C350 24, 1C350 25, 1C350 26, 1C350 27, 1C350 28, 1C350 29, 1C350 30, 1C350 31, 1C350 32, 1C350 33, 1C350 34, 1C350 35, 1C350 36, 1C350 37, 1C350 38, 1C350 39, 1C350 40, 1C350 41, 1C350 42, 1C350 43, 1C350 44, 1C350 45, 1C350 46, 1C350 47, 1C350 48, 1C350 49, 1C350 50, 1C350 51, 1C350 52, 1C350 53, 1C350 54, 1C450 b1, 1C350 55, 1C350 56, 1C350 57, 1C350 58, 1C350 59, 1C350 60, 1C350 61, 1C350 62, 1C350 63 in Anhang I prüfen (Korrelationstabelle unverbindlich)

  Rechtsakt auf EUR-Lex lesen
• Güter mit doppeltem Verwendungszweck Verordnung (EU) 2021/821, Anhang I 38249996

  Gilt nur für einen Teil der Waren unter diesem Code (Rechtsakt nennt 38249996).

  Möglicherweise Dual-Use; Eintrag 1C107, 1C111, 1C233, 8C001, 1C350 1, 1C350 2, 1C350 3, 1C350 4, 1C350 5, 1C350 6, 1C350 7, 1C350 8, 1C350 9, 1C350 10, 1C350 11, 1C350 12, 1C350 13, 1C350 14, 1C350 15, 1C350 16, 1C350 17, 1C350 18, 1C350 19, 1C350 20, 1C350 21, 1C350 22, 1C350 23, 1C350 24, 1C350 25, 1C350 26, 1C350 27, 1C350 28, 1C350 29, 1C350 30, 1C350 31, 1C350 32, 1C350 33, 1C350 34, 1C350 35, 1C350 36, 1C350 37, 1C350 38, 1C350 39, 1C350 40, 1C350 41, 1C350 42, 1C350 43, 1C350 44, 1C350 45, 1C350 46, 1C350 47, 1C350 48, 1C350 49, 1C350 50, 1C350 51, 1C350 52, 1C350 53, 1C350 54, 1C450 b1, 1C350 55, 1C350 56, 1C350 57, 1C350 58, 1C350 59, 1C350 60, 1C350 61, 1C350 62, 1C350 63 in Anhang I prüfen (Korrelationstabelle unverbindlich)

  Rechtsakt auf EUR-Lex lesen

Nur zur Orientierung. Prüfen Sie den Rechtsakt, bevor Sie sich auf einen Hinweis verlassen; Schwellenwerte, Ausnahmen und Genehmigungen sind nicht vollständig abgebildet. Die Dual-Use-Tabelle ordnet Codes Einträgen der Kontrollliste zu und ist unverbindlich.

Zollkontingente für 382499

• Ausgeschöpft 09.2542 Ursprung: alle Länder (erga omnes)

  Mixture containing bis[3-(triethoxysilyl)propyl]polysulfides (CAS RN 211519-85-6) with a purity by weight of 84 % or more

  01.01.2026 – 31.12.2026

  0 Kilograms

  Restmenge (0 %)

  Volumen 2.000.000
• Offen 09.2568 Ursprung: alle Länder (erga omnes)

  Mixture, in pellet form, containing by weight: – 49 % or more but not more than 50 % of bis[3-(triethoxysilyl)propyl] polysulphides (CAS RN 211519-85-6), and – 50 % or more but not more than 51 % of carbon black (CAS RN 1333-86-4), of which 75 % by weight or more pass through a sieve with an aperture of 0,60 mm, but not more than 10 % pass through a sieve with an aperture of 0,25 mm (as determined by the ASTM D1511 method)

  01.01.2026 – 31.12.2026

  287.300 Kilograms

  Restmenge (13,7 %)

  Volumen 2.100.000
• Kritisch 09.2907 Ursprung: alle Länder (erga omnes)

  Mixture of phytosterols, in the form of powder, containing by weight: – 75 % or more of sterols, – not more than 25 % of stanols, for use in the manufacture of stanols/sterols or stanol/sterol esters

  01.01.2026 – 31.12.2026

  2.090.400 Kilograms

  Restmenge (83,6 %)

  Volumen 2.500.000

Quelle: Europäische Kommission, Berichte zu Zollkontingenten, Stand 30.10.2026. Die Restmengen ändern sich täglich.

EU-Handel 2025 für 382499

Einfuhren aus Drittländern

4,1 Mrd. €

1.331.268 t

Ausfuhren in Drittländer

7,3 Mrd. €

Wichtigste Ursprungsländer nach Einfuhrwert

1. Vereinigte Staaten 982,5 Mio. €
2. Südkorea 858,9 Mio. €
3. China 648,3 Mio. €
4. Vereinigtes Königreich 438,3 Mio. €
5. Türkei 167,2 Mio. €

KN8-Codes unterhalb dieses Codes: 20. Quelle: Eurostat, Comext, CC BY 4.0, aufbereitet von hscode.info. Vertraulicher Handel ist keinen Codes zugeordnet.

Änderung im HS 2028

Aus den Entsprechungstabellen der WZO von HS 2022 zu HS 2028, nur als Orientierung. Die EU legt ihre KN-Codes für 2028 selbst fest.

Tarifänderungen für 382499 seit 2016

• Juli 2026 3824999638 Code eingeführt
• Jan. 2026 5 Codes Code gestrichen
• Jan. 2026 5 Codes Code eingeführt
• Juli 2025 3824999232 Code gestrichen
• Juli 2025 5 Codes Code eingeführt
• Apr. 2025 5 Codes Code gestrichen
• Apr. 2025 3824999217 Code eingeführt
• Jan. 2025 19 Codes Code gestrichen
• Jan. 2025 3 Codes Code eingeführt
• Aug. 2024 2 Codes Code eingeführt
• Juli 2024 3824999372 Code gestrichen
• Juli 2024 3824999271 Code eingeführt

31 frühere Änderungen. Monatlicher Vergleich der TARIC-Auszüge der Europäischen Kommission. Ohne saisonale Einfuhrpreise.

Einfuhrzoll im Vereinigten Königreich für 382499

• 0%
• 2%
• 4%
• 6%
• und weitere

Drittlandszollsätze aller britischen Warencodes unter dieser HS-Unterposition. Quelle: UK Department for Business and Trade, Stand 02.11.2026. Der britische Tarif weicht vom EU-Tarif ab.

Einfuhrumsatzsteuer in der EU

• Belgien 21 %
• Bulgarien 20 %
• Dänemark 25 %
• Deutschland 19 %
• Estland 24 %
• Finnland 25,5 %
• Frankreich 20 %
• Griechenland 24 % ggf. 6 %
• Irland 23 %
• Italien 22 %
• Kroatien 25 % ggf. 5 %
• Lettland 21 %
• Litauen 21 %
• Luxemburg 17 %
• Malta 18 %
• Niederlande 21 %
• Österreich 20 % ggf. 10 %
• Polen 23 %
• Portugal 23 %
• Rumänien 21 %
• Schweden 25 %
• Slowakei 23 %
• Slowenien 22 % ggf. 9,5 %
• Spanien 21 %
• Tschechien 21 %
• Ungarn 27 %
• Zypern 19 %

Normalsatz je Mitgliedstaat auf Zollwert, Zoll und Transportkosten bis zum Bestimmungsort. Ermäßigte Sätze hängen oft von Verwendung oder Abnehmer ab und gelten nur, wenn das Land sie für die Ware vorsieht. Quelle: Europäische Kommission, Taxes in Europe Database, Stand 02.11.2026.

Ursprungsregeln

Informationen

HS-Code Struktur

HS-Code Baumstruktur