Zolltarifnummer 3907910000 10 - andere Polyester

Einfuhrkosten für 390791 schätzen

Nur eine Schätzung. Der Zollwert ist der Preis einschließlich Transport und Versicherung bis zur EU-Grenze. Verbrauchsteuern, andere Gebühren und herstellerbezogene Antidumpingzölle sind nicht berücksichtigt. Präferenzsätze gelten nur mit gültigem Ursprungsnachweis. Länderzugehörigkeit und Ausnahmen: TARIC, Stand November 2026.

Ausfuhrmaßnahmen für 3907910000

Was gilt, wenn diese Waren die EU verlassen: Ausfuhrkontrollen, Dual-Use- und andere Genehmigungen, Verbote je Bestimmungsland und die besondere Maßeinheit der Ausfuhranmeldung.

Kontrollen und Dokumente 5

	Bestimmungsland	Start	Zoll / Steuer	Rechtsgrundlage Maßnahmetyp
1008	All third countries 1008	12-03-2025	Dokument nötig ohne Dokument verboten Details	Regelung0573/24 Export control of fluorinated greenhouse gases 765
KP	North Korea (Democratic People’s Republic of Korea) KP	01-09-2017	Dokument nötig ohne Dokument verboten Details	Regelung1509/17 Export control 709
BY	Belarus BY	25-02-2025	Dokument nötig ohne Dokument verboten Details	Regelung0765/06 Export control 766
RU	Russian Federation RU	26-06-2024	Dokument nötig ohne Dokument verboten Details	Regelung0833/14 Export control 709
IR	Iran, Islamic Republic of IR	30-09-2025	Dokument nötig ohne Dokument verboten Details	Regelung0267/12 Export control 768

Geschichte

Präferenzursprungsregeln für 3907910000

Was eine Ware erfüllen muss, um als Ursprungsware eines Partnerlandes zu gelten und den Präferenzzoll zu erhalten, je Abkommen. Wortlaut der Abkommen auf Englisch.

• EU-Egypt Association Agreement · Ägypten

  EU-Morocco Association Agreement · Marokko

  Plastics in primary forms, waste, parings and scrap, of plastic; except for headings ex3907 and 3912 for which the rules are set out below:

  – Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [13] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  – Other / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [14] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  – Copolymer, made from polycarbonate and acrylonitrile-butadiene-styrene copolymer (ABS) / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product [15]

  – Polyester / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product and/or manufacture from polycarbonate of tetrabromo-(bisphenol A)

• Autonomous Trade Preferences (Western Balkans) · Kosovo

  Plastics in primary forms, waste, parings and scrap, of plastic; except for headings ex39 07 and 3912 for which the rules are set out below:

  - Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [13] / or: Manufacture in which the value of al the materials used does not exceed 25 % of the ex-works price of the product

  - Other / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [14] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  - Copolymer, made from polycarbonate and acrylonitrile-butadiene-styrene copolymer (ABS) / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product [15]

  - Polyester / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex works price of the product and/or manufacture from polycarbonate of tetrabromo-(bisphenol A)

• EU-Canada CETA · Kanada

  A change from any other heading; or A change from within any one of these headings, whether or not there is also a change from any other heading, provided that the value of non-originating materials classified in the same heading as the final product does not exceed 50 per cent of the transaction value or ex-works price of the product; or A change from within any one of these headings, whether or not there is also a change from any other heading, provided that the net weight of non-originating material classified in the same heading as the final product does not exceed 50 per cent of the net weight of the product.

• EU-Chile Association Agreement · Chile

  Plastics in primary forms, waste, parings and scrap, of plastic; except for headings ex39 07 and 3912 for which the rules are set out below: — Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [13] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product — Other / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [14] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  — Copolymer, made from polycarbonate and acrylonitrile-butadiene-styrene copolymer (ABS) / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product [15]

  — Polyester / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product and/or manufacture from polycarbonate of tetrabromo-(bisphenol A)

• EU-Colombia/Peru/Ecuador Trade Agreement · Ecuador, Kolumbien, Peru

  Copolymer, made from polycarbonate and acrylonitrile-butadiene-styrene copolymer (ABS); polyethers of subheading 3907.20 except polyacetals; epoxide resins of subheading 3907.30; polycarbonates of subheading 3907.40; unsaturated polyesters of subheading 3907.91 / or: Manufacture from materials of any heading / or: Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

  Other / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 per cent of the ex-works price of the product, or Manufacture from polycarbonate of tetrabromo (bisphenol A) of subheading 3907.40 / or: Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

• EU-Algeria Association Agreement · Algerien

  Plastics in primary forms, waste, parings and scrap, of plastic; except for headings ex3907 and 3912 for which the rules are set out below:

  – Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product,

  and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [13] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [14] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  – Copolymer, made from polycarbonate and acrylonitrile-butadiene-styrene copolymer (ABS) / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product [15]

  – Polyester / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product and/or manufacture from polycarbonate of tetrabromo-(bisphenol A)

• EPA CARIFORUM

  – Copolymer, made from polycarbonate and acrylonitrile-butadiene-styrene copolymer (ABS) / or: Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 50 % of the ex-works price of the product (e) – Polyester / or: Manufacture in which the value of any materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product and/or manufacture from polycarbonate of tetrabromo-(bisphenol A)

• EU Market Access Regulation (EPA) · Côte d’Ivoire, Ghana, Kamerun, Kenia

  – Copolymer, made from polycarbonate and acrylonitrile-butadiene-styrene copolymer (ABS) / or: Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 50 % of the ex-works price of the product [16]

  – Polyester / or: Manufacture in which the value of any materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product and/or manufacture from polycarbonate of tetrabromo-(bisphenol A)

• Generalised Scheme of Preferences (GSP, GSP+, EBA) · Armenien, Indien, Kenia, Pakistan, Salomonen, Samoa, Syrien, Vietnam

  – Copolymer, made from polycarbonate and acrylonitrile-butadiene-styrene copolymer (ABS) / or: (a) LDCs Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product [22] or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product / or: (b) Other beneficiary countries Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product [23] or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

  – Polyester / or: (a) LDCs Manufacture from materials of any heading, except that of the product or Manufacture from polycarbonate of tetrabromo-(bisphenol A) or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product / or: (b) Other beneficiary countries Manufacture from materials of any heading, except that of the product or Manufacture from polycarbonate of tetrabromo-(bisphenol A) or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

• EU-Jordan Association Agreement · Jordanien

  Plastics in primary forms, waste, parings and scrap, of plastic; except for headings ex 3907 and 3912 for which the rules are set out below: - Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [13] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product - Other / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [14] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product - Copolymer, made from polycarbonate and acrylonitrile-butadiene-styrene copolymer (ABS) / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product [15] - Polyester / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product and/or manufacture from polycarbonate of tetrabromo-(bisphenol A)

• EU-Japan EPA · Japan

  CTH; MaxNOM 50 % (EXW); or RVC 55 % (FOB).

• EU-Korea FTA · Südkorea

  Other polyethers; other polyesters / or: Manufacture from materials of any heading

• EU-Lebanon Association Agreement · Libanon

  Plastics in primary forms, waste, parings and scrap, of plastic; except for headings ex3907 and 3912 for which the rules are set out below:

  – Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [13] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  – Other / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [14] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  – Copolymer, made from polycarbonate and acrylonitrile-butadiene-styrene copolymer (ABS) / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product [15]

  – Polyester / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product and/or manufacture from polycarbonate of tetrabromo-(bisphenol A)

• EU-Mexico Global Agreement · Mexiko

  Polyacetals, other polyethers and epoxide resins, in primary forms, polycarbonates, alkyd resins, polyallyl esters and other polyesters, in primary forms — Copolymer, made from polycarbonate and acrylonitrile-butadiene-styrene copolymer (ABS) / or: Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 50 % of the ex-works price of the product [18] — Polyester / or: Manufacture in which all the materials used are classified within a Chapter other than Chapter 39. However, materials of Chapter 39 may be used, provided their value does not exceed 20 % of the ex-works price of the product and/or manufacture from polycarbonate of tetrabromo-(bisphenol A) — Other / or: Manufacture in which all the materials used are classified within a Chapter other than Chapter 39. However, materials classified within Chapter 39 may be used, provided their value does not exceed 20 % of the ex-works price of the product [19] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

• EU-Palestine Interim Association Agreement · Palästina

  Plastics in primary forms, waste, parings and scrap, of plastic; except for heading Nos ex 3907 and 3912 for which the rules are set out below: - Addition homopolymerization products in which a single monomer contributes more than 99% by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50% of the ex-works price of the product; the value of any materials of Chapter 39 used does not exceed 20% of the ex-works price of the product [1] / or: Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product - Other / or: Manufacture in which the value of the materials of Chapter 39 used does not exceed 20% of the ex-works price of the product 1 / or: Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product

  - Copolymer, made from polycarbonate and acrylonitrile-butadiene-styrene copolymer (ABS) / or: Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 50% of the ex-works price of the product 1 - Polyester / or: Manufacture in which the value of any materials of Chapter 39 used does not exceed 20% of the ex-works price of the product and/or manufacture from polycarbonate of tetrabromo-(bisphenol A)

• EU-Singapore FTA · Singapur

  Copolymer, made from polycarbonate and acrylonitrile-butadiene-styrene copolymer (ABS) / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product [21] or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

  Polyester / or: Manufacture from materials of any heading, except that of the product or Manufacture from polycarbonate of tetrabromo-(bisphenol A) or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

• EU-Tunisia Association Agreement · Tunesien

  Plastics in primary forms, waste, parings and scrap, of plastic; except for headings ex 3907 and 3912 for which the rules are set out below: Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [13] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [14] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  Copolymer, made from polycarbonate and acrylonitrile-butadiene-styrene copolymer (ABS) / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product [15] Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product and/or manufacture from polycarbonate of tetrabromo-(bisphenol A)

Quelle: Europäische Kommission, Access2Markets (CC BY 4.0, gekürzt). Maßgeblich ist der Text des Abkommens. Access2Markets

Anmerkungen und Erläuterungen zu 3907910000

Quellen: Kombinierte Nomenklatur 2026, Anhang I der Verordnung (EWG) Nr. 2658/87 (CELEX 32025R1926), und die Erläuterungen zur Kombinierten Nomenklatur (CELEX 02019XC0329(02)-20260213). Die Abschnitts- und Kapitelanmerkungen sind rechtsverbindlich, die Erläuterungen sind Auslegungshilfen. EUR-Lex

Britische verbindliche Zolltarifauskünfte zu 3907910000

Auskünfte von HM Revenue & Customs für Waren, deren britischer Warencode so beginnt wie dieser EU-Code. Der britische Zolltarif weicht vom EU-Tarif ab, für die EU sind sie daher nur eine Orientierung.

• UK 3907911000 Gültig vom 26.06.2024 bis 25.06.2027 · Auskunft 600010228 auf GOV.UK

  Castor Polyol Chemically modified castor oil use: production of polyurethane The product is packaged in 1000kg IBC's or 200kg drums

  Begründung

  Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 3907 - Polyacetals, other polyethers and epoxide resins, in primary forms; polycarbonates, alkyd resins, polyallyl esters and other polyesters, in primary forms GIR 5b has been used to identify the type of packaging – The product is packaged in 1000kg IBC's or 200kg drums GIR 6 has been used to classify the goods to subheading level 390791 – Other polyesters: unsaturated 8 digit code 39079110 - liquid Also classified in accordance with: Chapter 39 notes 1,4 and 6

• UK 3907911000 Gültig vom 26.06.2024 bis 25.06.2027 · Auskunft 600010353 auf GOV.UK

  Castor polyol D-1145 Chemically modified castor oil use: production of polyurethane The product is packaged in 1000kg IBCs or 200kg drums

  Begründung

  Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 3907 - Polyacetals, other polyethers and epoxide resins, in primary forms; polycarbonates, alkyd resins, polyallyl esters and other polyesters, in primary forms GIR 5b has been used to identify the type of packaging – The product is packaged in 1000kg IBC's or 200kg drums GIR 6 has been used to classify the goods to subheading level 390791 – Other polyesters: unsaturated 8 digit code 39079110 - liquid Also classified in accordance with: Chapter 39 notes 1,4 and 6

Quelle: HM Revenue & Customs, Advance Tariff Rulings. Enthält Informationen des öffentlichen Sektors unter der Open Government Licence v3.0.

Beschränkungen und Hinweise für 390791

• Russland-Sanktionen: Einfuhrverbot Verordnung (EU) Nr. 833/2014, Anhang XXI 3907

  Art. 3i, Güter, die Russland erhebliche Einnahmen verschaffen

  Rechtsakt auf EUR-Lex lesen
• Russland-Sanktionen: Ausfuhrverbot Verordnung (EU) Nr. 833/2014, Anhang XXIII 3907

  Art. 3k, Güter, die zur Stärkung der industriellen Kapazitäten Russlands beitragen könnten

  Rechtsakt auf EUR-Lex lesen
• Güter mit doppeltem Verwendungszweck Verordnung (EU) 2021/821, Anhang I 39079110

  Gilt nur für einen Teil der Waren unter diesem Code (Rechtsakt nennt 39079110).

  Möglicherweise Dual-Use; Eintrag 1C008 in Anhang I prüfen (Korrelationstabelle unverbindlich)

  Rechtsakt auf EUR-Lex lesen

Nur zur Orientierung. Prüfen Sie den Rechtsakt, bevor Sie sich auf einen Hinweis verlassen; Schwellenwerte, Ausnahmen und Genehmigungen sind nicht vollständig abgebildet. Die Dual-Use-Tabelle ordnet Codes Einträgen der Kontrollliste zu und ist unverbindlich.

EU-Handel 2025 für 390791

Einfuhren aus Drittländern

238,3 Mio. €

136.287 t

Ausfuhren in Drittländer

306,8 Mio. €

Wichtigste Ursprungsländer nach Einfuhrwert

1. Türkei 138,9 Mio. €
2. Vereinigtes Königreich 35,1 Mio. €
3. China 13,2 Mio. €
4. Norwegen 12,2 Mio. €
5. Schweiz 9,1 Mio. €

KN8-Codes unterhalb dieses Codes: 2. Quelle: Eurostat, Comext, CC BY 4.0, aufbereitet von hscode.info. Vertraulicher Handel ist keinen Codes zugeordnet.

Einfuhrzoll im Vereinigten Königreich für 390791

• 0%
• 6%

Drittlandszollsätze aller britischen Warencodes unter dieser HS-Unterposition. Quelle: UK Department for Business and Trade, Stand 02.11.2026. Der britische Tarif weicht vom EU-Tarif ab.

Einfuhrumsatzsteuer in der EU

• Belgien 21 %
• Bulgarien 20 %
• Dänemark 25 %
• Deutschland 19 %
• Estland 24 % ggf. 9 %
• Finnland 25,5 %
• Frankreich 20 %
• Griechenland 24 %
• Irland 23 %
• Italien 22 %
• Kroatien 25 %
• Lettland 21 %
• Litauen 21 %
• Luxemburg 17 %
• Malta 18 %
• Niederlande 21 %
• Österreich 20 %
• Polen 23 %
• Portugal 23 %
• Rumänien 21 %
• Schweden 25 %
• Slowakei 23 %
• Slowenien 22 %
• Spanien 21 %
• Tschechien 21 %
• Ungarn 27 %
• Zypern 19 %

Normalsatz je Mitgliedstaat auf Zollwert, Zoll und Transportkosten bis zum Bestimmungsort. Ermäßigte Sätze hängen oft von Verwendung oder Abnehmer ab und gelten nur, wenn das Land sie für die Ware vorsieht. Quelle: Europäische Kommission, Taxes in Europe Database, Stand 02.11.2026.

Ursprungsregeln

Informationen

HS-Code Struktur

HS-Code Baumstruktur