Zolltarifnummer 3917390000 80 - andere

Einfuhrkosten für 391739 schätzen

Nur eine Schätzung. Der Zollwert ist der Preis einschließlich Transport und Versicherung bis zur EU-Grenze. Verbrauchsteuern, andere Gebühren und herstellerbezogene Antidumpingzölle sind nicht berücksichtigt. Präferenzsätze gelten nur mit gültigem Ursprungsnachweis. Länderzugehörigkeit und Ausnahmen: TARIC, Stand November 2026.

Ausfuhrmaßnahmen für 3917390000

Was gilt, wenn diese Waren die EU verlassen: Ausfuhrkontrollen, Dual-Use- und andere Genehmigungen, Verbote je Bestimmungsland und die besondere Maßeinheit der Ausfuhranmeldung.

Kontrollen und Dokumente 7

	Bestimmungsland	Start	Zoll / Steuer	Rechtsgrundlage Maßnahmetyp
KP	North Korea (Democratic People’s Republic of Korea) KP	01-07-2019	Dokument nötig ohne Dokument verboten Details	Regelung1509/17 Restriction on export 476
1008	All third countries 1008	12-03-2025	Dokument nötig ohne Dokument verboten Details	Regelung0573/24 Export control of fluorinated greenhouse gases 765
RU	Russian Federation RU	24-06-2023	Dokument nötig ohne Dokument verboten Details	Regelung0833/14 Export control 767
BY	Belarus BY	25-02-2025	Dokument nötig ohne Dokument verboten Details	Regelung0765/06 Export control 766
BY	Belarus BY	25-02-2025	Dokument nötig ohne Dokument verboten Details	Regelung0765/06 Export control 767
RU	Russian Federation RU	26-06-2024	Dokument nötig ohne Dokument verboten Details	Regelung0833/14 Export control 709
IR	Iran, Islamic Republic of IR	30-09-2025	Dokument nötig ohne Dokument verboten Details	Regelung0267/12 Export control 768

Geschichte

Präferenzursprungsregeln für 3917390000

Was eine Ware erfüllen muss, um als Ursprungsware eines Partnerlandes zu gelten und den Präferenzzoll zu erhalten, je Abkommen. Wortlaut der Abkommen auf Englisch.

• EU-Egypt Association Agreement · Ägypten

  EU-Morocco Association Agreement · Marokko

  Semi-manufactures and articles of plastics; except for headings ex3916, ex3917, ex3920 and ex3921, for which the rules are set out below:

  – Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  – Other:

  – – Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [16] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  – – Other / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  Profile shapes and tubes / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of the same heading as the product used does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

• Autonomous Trade Preferences (Western Balkans) · Kosovo

  Semi-manufactures and articles of plastics; except for headings ex39 16, ex39 17, ex39 20 and ex39 21, for which the rules are set out below:

  - Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  - Other:

  - - Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [16] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  - - Other / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  Profile shapes and tubes / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of the same heading as the product used does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

• EU-Canada CETA · Kanada

  A change from any other heading.

• EU-Chile Association Agreement · Chile

  Semi-manufactures and articles of plastics; except for headings ex39 16, ex39 17, ex39 20 and ex39 21, for which the rules are set out below: — Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product — Other: — — Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [16] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product — — Other / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  Profile shapes and tubes / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of the same heading as the product used does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

• EU-Colombia/Peru/Ecuador Trade Agreement · Ecuador, Kolumbien, Peru

  Plastics and articles thereof / or: Manufacture from materials of any heading, except that of the product / or: Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

• EU-Algeria Association Agreement · Algerien

  Semi-manufactures and articles of plastics; except for headings ex3916, ex3917, ex3920 and ex3921, for which the rules are set out below:

  – Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  – Other:

  – – Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product,

  and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [16] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  Profile shapes and tubes / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of the same heading as the product used does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

• EPA CARIFORUM

  Semi-manufactures and articles of plastics; except for headings Nos ex 3916, ex 3917, ex 3920 and ex 3921, for which the rules are set out below: – Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of any materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product – Other: – – Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: – the value of all the materials used does not exceed 50 % of the ex-works price of the product; – the value of any materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product (e) / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product – – Other / or: Manufacture in which the value of any materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product (e) / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  Profile shapes and tubes / or: Manufacture in which: – the value of all the materials used does not exceed 50 % of the ex-works price of the product; – the value of any materials classified within the same heading as the product does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

• EU Market Access Regulation (EPA) · Côte d’Ivoire, Ghana, Kamerun, Kenia

  Semi-manufactures and articles of plastics; except for headings Nos ex3916, ex3917, ex3920 and ex3921, for which the rules are set out below:

  – Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of any materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  – Other:

  – – Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product; the value of any materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  – – Other / or: Manufacture in which the value of any materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [18] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  Profile shapes and tubes / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product; the value of any materials classified within the same heading as the product does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

• Generalised Scheme of Preferences (GSP, GSP+, EBA) · Armenien, Indien, Kenia, Pakistan, Salomonen, Samoa, Syrien, Vietnam

  Plastics and articles thereof; except for: / or: (a) LDCs Manufacture from materials of any heading, except that of the product. or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product / or: (b) Other beneficiary countries Manufacture from materials of any heading, except that of the product. or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

• EU-Israel Association Agreement · Israel

  Profile shapes and tubes / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and the value of any materials classified within the same heading as the product does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

• EU-Jordan Association Agreement · Jordanien

  Semi-manufactures and articles of plastics; except for headings ex 3916, ex 3917, ex 3920 and ex 3921, for which the rules are set out below: - Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product - Other: - - Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [16] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product - - Other / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  Profile shapes and tubes / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of the same heading as the product used does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product - Ionomer sheet or film / or: Manufacture from a thermoplastic partial salt which is a copolymer of ethylene and metacrylic acid partly neutralised with metal ions, mainly zinc and sodium / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product - Sheets of regenerated cellulose, polyamides or polyethylene / or: Manufacture in which the value of all the materials of the same heading as the product used does not exceed 20 % of the ex-works price of the product

• EU-Japan EPA · Japan

  CTH; MaxNOM 50 % (EXW); or RVC 55 % (FOB).

• EU-Korea FTA · Südkorea

  Plastics in primary forms, waste, parings and scrap, of plastic; semi-manufactures and articles of plastics / or: Manufacture from materials of any heading, except that of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

• EU-Central America Association Agreement

  Semi-manufactures and articles of plastics / or: Manufacture from materials of any heading, except that of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

• EU-Lebanon Association Agreement · Libanon

  Semi-manufactures and articles of plastics; except for headings ex3916, ex3917, ex3920 and ex3921, for which the rules are set out below:

  – Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  – Other:

  – – Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [16] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  – – Other / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  Profile shapes and tubes / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, within the above limit, the value of all the materials of the same heading as the product used does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

• EU-Mexico Global Agreement · Mexiko

  Semi-manufactures and articles of plastics; except for headings Nos ex39 16, ex39 17, ex39 20 and ex39 21, for which the rules are set out below: — Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which all the materials used are classified within a Chapter other than Chapter 39. However, materials classified within Chapter 39 may be used, provided their value does not exceed 50 % of the ex-works price of the product [23] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product — Other: — — Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, the value of any materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [24] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product — — Other / or: Manufacture in which all the materials used are classified within a Chapter other than Chapter 39. However, materials classified within Chapter 39 may be used, provided their value does not exceed 20 % of the ex-works price of the product [25] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  Profile shapes and tubes / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, the value of any materials classified within the same heading as the product does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

• EU-Palestine Interim Association Agreement · Palästina

  Semi-manufactures and articles of plastics; except for headings Nos ex 3916, ex 3917, ex 3920 and ex 3921, for which the rules are set out below: - Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked - Other: / or: Manufacture in which the value of any materials of Chapter 39 used does not exceed 50% of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product -- Addition homopolymerization products in which a single monomer contributes more than 99% by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50% of the ex-works price of the product; the value of any materials of Chapter 39 used does not exceed 20% of the ex-works price of the product [1] / or: Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product -- Other / or: Manufacture in which the value of any materials of Chapter 39 used does not exceed 20% of the ex-works price of the product 1 / or: Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product

  Profile shapes and tubes / or: Manufacture in which: the value of all the materials used does not exceed 50% of the ex-works price of the product; the value of any materials classified within the same heading as the product does not exceed 20% of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product

• EU-Singapore FTA · Singapur

  Manufacture from materials of any heading, except that of the product. However materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-work price of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product [21] In the case of the products composed of materials classified within both headings 3901 to 3906, and in the case of the products within headings 3907 to 3911, this restriction only applies to that group of materials which predominates by weight in the product.

• EU-Tunisia Association Agreement · Tunesien

  Semi-manufactures and articles of plastics; except for headings ex 3916, ex 3917, ex 3920 and ex 3921, for which the rules are set out below: Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [16] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  Profile shapes and tubes / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of the same heading as the product used does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

Quelle: Europäische Kommission, Access2Markets (CC BY 4.0, gekürzt). Maßgeblich ist der Text des Abkommens. Access2Markets

Anmerkungen und Erläuterungen zu 3917390000

Quellen: Kombinierte Nomenklatur 2026, Anhang I der Verordnung (EWG) Nr. 2658/87 (CELEX 32025R1926), und die Erläuterungen zur Kombinierten Nomenklatur (CELEX 02019XC0329(02)-20260213). Die Abschnitts- und Kapitelanmerkungen sind rechtsverbindlich, die Erläuterungen sind Auslegungshilfen. EUR-Lex

EU-Einreihungsverordnungen zu 3917390000

Verordnungen der Kommission, die bestimmte Waren in diesen Code eingereiht haben. Sie binden den Zoll in allen Mitgliedstaaten für gleiche Waren.

• 3917 39 00 19.03.2013 · Verordnung auf EUR-Lex
  Ein biegsamer Schlauch bestehend aus Polyamid mit einem transparenten Endstück, innen mit einem feinen Metallgitter verstärkt, das integraler Bestandteil des Schlauches ist. Der Schlauch ist 125,5 cm lang und hat einen Außendurchmesser von 2,8 mm.

  Der Schlauch ist bei der Gestellung nicht sterilisiert. Er ist nicht aufgerollt, in einer doppelten Verpackung aufgemacht. Der Schlauch wird von medizinischem Fachpersonal verwendet, um einen „Stent“ in den menschlichen Körper einzuführen. Der Schlauch verbleibt nach Gebrauch nicht im Körper.

  Begründung

  Einreihung gemäß den Allgemeinen Vorschriften 1 und 6 für die Auslegung der Kombinierten Nomenklatur, der Anmerkung 8 zu Kapitel 39 sowie nach dem Wortlaut der KN-Codes 3917 und 3917 39 00 . Angesichts der objektiven Merkmale und Eigenschaften des Schlauches entspricht die Ware der Bezeichnung der Position 3917 und erfüllt die Bedingungen von Anmerkung 8 zu Kapitel 39. Der Verwendungszweck des Schlauches kann nicht von seinen objektiven Merkmalen abgeleitet werden, da der Schlauch an sich nicht als medizinisches Instrument oder Gerät identifiziert werden kann. Daher ist die Einreihung in die Position 9018 ausgeschlossen. Er ist daher in den KN-Code 3917 39 00 als andere Schläuche aus Kunststoff einzureihen.

Britische verbindliche Zolltarifauskünfte zu 3917390000

Auskünfte von HM Revenue & Customs für Waren, deren britischer Warencode so beginnt wie dieser EU-Code. Der britische Zolltarif weicht vom EU-Tarif ab, für die EU sind sie daher nur eine Orientierung.

• UK 3917390099 Gültig vom 15.02.2024 bis 14.02.2027 · Auskunft 600009610 auf GOV.UK

  SpeeTube Ethyl piping Measuring 10m X 1.3mm. Colour green. The green SpeeTube 10, is an oxygen diffusion-tight 5-layer PE-RT (PolyEthylene pipe with raised temperature resistance) Max. operating temperature acc. ISO 10508 Class 5 [°C] 90 Max. operating pressure acc. ISO 10508 Class 5 [bar] 6, plastic pipe. suitable for heating and cooling. Burst pressure of 0.5 mpa. It cannot withstand a pressure of 27.6 mpa It comprises, 1 – an external Pe-RT layer. 2 - a Polymer adhesive. 3 - EVOH Oxygen barrier. 4 – Polymer adhesive. 5 Internal PE-RT layer. Primarily used for under floor, wall, and ceiling heating. Alongside other fixing products. It may also be suitable for alternative applications. The pipe durable and carries a 30-year warranty. The pipe is available in roll lengths of 80, 240, 480 and 800 m. It will use a pipe reel when installing the pipe into the SpeeTile or SpeeTherm (classified elsewhere)– the pipe unwinds easily and without tension in the direction favoured by the pipe. SpeeTube10 80m - 40 - Packs per pallet 100x120x200cm 116 kg SpeeTube10 240m - 20 Rolls per pallet 80x120x200cm 174kg SpeeTube10 480m - 10 Rolls per pallet 80x80x200cm 175 kg SpeeTube10 800m - 9 Rolls per pallet 80x80x200cm 262.8kg

  Begründung

  Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3(1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)) and b. Notes to a section or chapter of the goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading: 3917 - Tubes, pipes and hoses, and fittings therefor (for example, joints, elbows, flanges), of plastics. GIR 5B has been used to identify the type of packaging: individually packaged in PE-RT wrapping, then on pallets. GIR 6 has been used to classify the goods to subheading level: 391739 Other than, flexible tubes, pipes, and hoses, having a minimum burst pressure of 27,6 mpa. 10-digit code: 3917390099 - Other Also classified in accordance with: Heading 3917 Chapter note 1 & 8 Harmonised System Explanatory Notes to heading: 39.17.39 Combined …

• UK 3917390099 Gültig vom 02.10.2026 bis 01.10.2029 · Auskunft 600016352 auf GOV.UK

  Flexible ducting Materials: inner polyurethane-coated polyester fabric liner, 12 mm polyurethane foam insulation layer, and UV-resistant white PVC outer jacket Incorporates a 2.5 mm diameter spiral steel wire helix reinforcement, together with water sealing tape beneath a PVC scuff strip Supplied as a finished flexible duct length with approximately 100 mm wire-free cuffed ends Use: designed for low-pressure conditioned air conveyance in heating, ventilation, and air-conditioning systems

  Begründung

  Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect : a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General Interpretative Rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 3917 - Tubes, pipes and hoses, and fittings therefor (for example, joints, elbows, flanges), of plastics. GIR 6 - Has been used to classify the goods to subheading level 391739 - Other tubes, pipes and hoses; Otherwise than elsewhere specified. 10 Digit Code 3917390099 - Otherwise than elsewhere specified Also classified in accordance with: Chapter 39 note 8 HSEN to 3917

Quelle: HM Revenue & Customs, Advance Tariff Rulings. Enthält Informationen des öffentlichen Sektors unter der Open Government Licence v3.0.

Beschränkungen und Hinweise für 391739

• Russland-Sanktionen: Einfuhrverbot Verordnung (EU) Nr. 833/2014, Anhang XXI 3917

  Art. 3i, Güter, die Russland erhebliche Einnahmen verschaffen

  Rechtsakt auf EUR-Lex lesen
• Russland-Sanktionen: Ausfuhrverbot Verordnung (EU) Nr. 833/2014, Anhang XXIII 3917

  Art. 3k, Güter, die zur Stärkung der industriellen Kapazitäten Russlands beitragen könnten

  Rechtsakt auf EUR-Lex lesen

Nur zur Orientierung. Prüfen Sie den Rechtsakt, bevor Sie sich auf einen Hinweis verlassen; Schwellenwerte, Ausnahmen und Genehmigungen sind nicht vollständig abgebildet.

EU-Handel 2025 für 391739

Einfuhren aus Drittländern

680,7 Mio. €

81.757 t

Ausfuhren in Drittländer

813 Mio. €

Wichtigste Ursprungsländer nach Einfuhrwert

1. China 167,1 Mio. €
2. Vereinigte Staaten 120,9 Mio. €
3. Schweiz 82,5 Mio. €
4. Vereinigtes Königreich 68,3 Mio. €
5. Marokko 57,5 Mio. €

KN8-Codes unterhalb dieses Codes: 1. Quelle: Eurostat, Comext, CC BY 4.0, aufbereitet von hscode.info. Vertraulicher Handel ist keinen Codes zugeordnet.

Änderung im HS 2028

Aus den Entsprechungstabellen der WZO von HS 2022 zu HS 2028, nur als Orientierung. Die EU legt ihre KN-Codes für 2028 selbst fest.

Tarifänderungen für 391739 seit 2016

• Juli 2021 3917390020 Code eingeführt

Monatlicher Vergleich der TARIC-Auszüge der Europäischen Kommission. Ohne saisonale Einfuhrpreise.

Einfuhrzoll im Vereinigten Königreich für 391739

• 6%

Drittlandszollsätze aller britischen Warencodes unter dieser HS-Unterposition. Quelle: UK Department for Business and Trade, Stand 02.11.2026. Der britische Tarif weicht vom EU-Tarif ab.

Einfuhrumsatzsteuer in der EU

• Belgien 21 %
• Bulgarien 20 %
• Dänemark 25 %
• Deutschland 19 %
• Estland 24 % ggf. 9 %
• Finnland 25,5 %
• Frankreich 20 %
• Griechenland 24 %
• Irland 23 %
• Italien 22 %
• Kroatien 25 %
• Lettland 21 %
• Litauen 21 %
• Luxemburg 17 %
• Malta 18 %
• Niederlande 21 %
• Österreich 20 %
• Polen 23 %
• Portugal 23 %
• Rumänien 21 %
• Schweden 25 %
• Slowakei 23 %
• Slowenien 22 %
• Spanien 21 %
• Tschechien 21 %
• Ungarn 27 %
• Zypern 19 %

Normalsatz je Mitgliedstaat auf Zollwert, Zoll und Transportkosten bis zum Bestimmungsort. Ermäßigte Sätze hängen oft von Verwendung oder Abnehmer ab und gelten nur, wenn das Land sie für die Ware vorsieht. Quelle: Europäische Kommission, Taxes in Europe Database, Stand 02.11.2026.

Ursprungsregeln

Informationen

HS-Code Struktur

HS-Code Baumstruktur