Zolltarifnummer 3921190000 80 - aus anderen Kunststoffen

Einfuhrkosten für 392119 schätzen

Nur eine Schätzung. Der Zollwert ist der Preis einschließlich Transport und Versicherung bis zur EU-Grenze. Verbrauchsteuern, andere Gebühren und herstellerbezogene Antidumpingzölle sind nicht berücksichtigt. Präferenzsätze gelten nur mit gültigem Ursprungsnachweis. Länderzugehörigkeit und Ausnahmen: TARIC, Stand November 2026.

Ausfuhrmaßnahmen für 3921190000

Was gilt, wenn diese Waren die EU verlassen: Ausfuhrkontrollen, Dual-Use- und andere Genehmigungen, Verbote je Bestimmungsland und die besondere Maßeinheit der Ausfuhranmeldung.

Kontrollen und Dokumente 5

	Bestimmungsland	Start	Zoll / Steuer	Rechtsgrundlage Maßnahmetyp
BY	Belarus BY	25-02-2025	Dokument nötig ohne Dokument verboten Details	Regelung0765/06 Export control 766
RU	Russian Federation RU	27-09-2024	Dokument nötig ohne Dokument verboten Details	Regelung0833/14 Export control 709
KP	North Korea (Democratic People’s Republic of Korea) KP	01-09-2017	Dokument nötig ohne Dokument verboten Details	Regelung1509/17 Export control on restricted goods and technologies 717
1008	All third countries 1008	11-03-2024	Dokument nötig ohne Dokument verboten Details	Regelung0590/24 Export control on ozone-depleting substances 725
1008	All third countries 1008	12-03-2025	Dokument nötig ohne Dokument verboten Details	Regelung0573/24 Export control of fluorinated greenhouse gases 765

Geschichte

Präferenzursprungsregeln für 3921190000

Was eine Ware erfüllen muss, um als Ursprungsware eines Partnerlandes zu gelten und den Präferenzzoll zu erhalten, je Abkommen. Wortlaut der Abkommen auf Englisch.

• EEA/EFTA agreements (Switzerland, Norway, Liechtenstein, Faroe Islands) · Färöer, Liechtenstein, Norwegen, Schweiz

  EU-Iceland FTA · Island

  EU-Ukraine DCFTA · Ukraine

  Foils of plastic, metallised / or: Manufacture from highly-transparent polyester-foils with a thickness of less than 23 micron [18] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

• EU-Georgia DCFTA · Georgien

  EU-Moldova DCFTA · Republik Moldau

  Pan-Euro-Mediterranean (PEM) Convention · Ägypten, Albanien, Andorra, Bosnien und Herzegowina, Färöer, Island, Kosovo, Liechtenstein, Montenegro, Nordmazedonien, Norwegen, Palästina, Schweiz, Türkei

  Foils of plastic, metallised / or: Manufacture from highly-transparent polyester-foils with a thickness of less than 23 micron [20] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

• EU-Egypt Association Agreement · Ägypten

  EU-Morocco Association Agreement · Marokko

  Semi-manufactures and articles of plastics; except for headings ex3916, ex3917, ex3920 and ex3921, for which the rules are set out below:

  – Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  – Other:

  – – Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [16] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  – – Other / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  Foils of plastic, metallised / or: Manufacture from highly-transparent polyester-foils with a thickness of less than 23 micron [18] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

• Autonomous Trade Preferences (Western Balkans) · Kosovo

  Semi-manufactures and articles of plastics; except for headings ex39 16, ex39 17, ex39 20 and ex39 21, for which the rules are set out below:

  - Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  - Other:

  - - Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [16] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  - - Other / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  Foils of plastic, metallised / or: Manufacture from highly-transparent polyester-foils with a thickness of less than 23 micron [18] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

• EU-Canada CETA · Kanada

  A change from any other heading.

• EU-Chile Association Agreement · Chile

  Semi-manufactures and articles of plastics; except for headings ex39 16, ex39 17, ex39 20 and ex39 21, for which the rules are set out below: — Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product — Other: — — Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [16] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product — — Other / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  Foils of plastic, metallised / or: Manufacture from highly-transparent polyester-foils with a thickness of less than 23 micron [18] / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

• EU-Colombia/Peru/Ecuador Trade Agreement · Ecuador, Kolumbien, Peru

  Plastics and articles thereof / or: Manufacture from materials of any heading, except that of the product / or: Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

• EU-Algeria Association Agreement · Algerien

  Semi-manufactures and articles of plastics; except for headings ex3916, ex3917, ex3920 and ex3921, for which the rules are set out below:

  – Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  – Other:

  – – Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product,

  and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [16] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  Foils of plastic, metallised / or: Manufacture from highly-transparent polyester-foils with a thickness of less than 23 micron [18] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

• EPA CARIFORUM

  Semi-manufactures and articles of plastics; except for headings Nos ex 3916, ex 3917, ex 3920 and ex 3921, for which the rules are set out below: – Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of any materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product – Other: – – Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: – the value of all the materials used does not exceed 50 % of the ex-works price of the product; – the value of any materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product (e) / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product – – Other / or: Manufacture in which the value of any materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product (e) / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  Foils of plastic, metallised / or: Manufacture from highly transparent polyester foils with a thickness of less than 23 micron (f) / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

• EPA Eastern and Southern Africa

  Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

• EU Market Access Regulation (EPA) · Côte d’Ivoire, Ghana, Kamerun, Kenia

  Semi-manufactures and articles of plastics; except for headings Nos ex3916, ex3917, ex3920 and ex3921, for which the rules are set out below:

  – Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of any materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  – Other:

  – – Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product; the value of any materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  – – Other / or: Manufacture in which the value of any materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [18] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  Foils of plastic, metallised / or: Manufacture from highly transparent polyester foils with a thickness of less than 23 micron [19] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

• EPA Pacific · Fidschi, Papua-Neuguinea, Salomonen, Samoa

  Foils of plastic, metallized / or: Manufacture from highly transparent polyester foils with a thickness of less than 23 micron [18] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

• Generalised Scheme of Preferences (GSP, GSP+, EBA) · Armenien, Indien, Kenia, Pakistan, Salomonen, Samoa, Syrien, Vietnam

  Foils of plastic, metallised / or: (a) LDCs Manufacture from highly-transparent polyester-foils with a thickness of less than 23 micron [24] or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product / or: (b) Other beneficiary countries Manufacture from highly-transparent polyester-foils with a thickness of less than 23 micron [25] or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product [22] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [23] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [24] The following foils shall be considered as highly transparent: foils, the optical dimming of which, measured according to ASTM-D 1003-16 by Gardner Hazemeter (i.e. Hazefactor), is less than 2 %. / or: [25] The following foils shall be considered as highly transparent: foils, the optical dimming of which, measured according to ASTM-D 1003-16 by Gardner Hazemeter (i.e. Hazefactor), is less than 2 %.

• EU-Israel Association Agreement · Israel

  Foils of plastic, metallised / or: Manufacture from highly transparent polyester foils with a thickness of less than 23 micron [28] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

• EU-Jordan Association Agreement · Jordanien

  Semi-manufactures and articles of plastics; except for headings ex 3916, ex 3917, ex 3920 and ex 3921, for which the rules are set out below: - Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product - Other: - - Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [16] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product - - Other / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  Foils of plastic, metallised / or: Manufacture from highly-transparent polyester-foils with a thickness of less than 23 micron [18] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

• EU-Jordan Association Agreement (relaxed rules, 2016) · Jordanien

  Foils of plastic, metallised / or: Manufacture from highly-transparent polyester-foils with a thickness of less than 23 micron [7] or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product [7] The following foils shall be considered as highly transparent: foils, the optical dimming of which, measured according to ASTM-D 1003-16 by Gardner Hazemeter (i.e. Hazefactor), is less than 2 %.

• EU-Japan EPA · Japan

  CTH; MaxNOM 50 % (EXW); or RVC 55 % (FOB).

• EU-Korea FTA · Südkorea

  Plastics in primary forms, waste, parings and scrap, of plastic; semi-manufactures and articles of plastics / or: Manufacture from materials of any heading, except that of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

• EU-Central America Association Agreement

  Articles of plastics / or: Manufacture from materials of any heading, except that of the product / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

• EU-Lebanon Association Agreement · Libanon

  Semi-manufactures and articles of plastics; except for headings ex3916, ex3917, ex3920 and ex3921, for which the rules are set out below:

  – Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  – Other:

  – – Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [16] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  – – Other / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  Foils of plastic, metallised / or: Manufacture from highly-transparent polyester-foils with a thickness of less than 23 micron [18] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

• EU-Mexico Global Agreement · Mexiko

  Semi-manufactures and articles of plastics; except for headings Nos ex39 16, ex39 17, ex39 20 and ex39 21, for which the rules are set out below: — Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which all the materials used are classified within a Chapter other than Chapter 39. However, materials classified within Chapter 39 may be used, provided their value does not exceed 50 % of the ex-works price of the product [23] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product — Other: — — Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, the value of any materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [24] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product — — Other / or: Manufacture in which all the materials used are classified within a Chapter other than Chapter 39. However, materials classified within Chapter 39 may be used, provided their value does not exceed 20 % of the ex-works price of the product [25] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  Foils of plastic, metallised / or: Manufacture from highly transparent polyester foils with a thickness of less than 23 micron [26] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

• EU-Palestine Interim Association Agreement · Palästina

  Semi-manufactures and articles of plastics; except for headings Nos ex 3916, ex 3917, ex 3920 and ex 3921, for which the rules are set out below: - Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked - Other: / or: Manufacture in which the value of any materials of Chapter 39 used does not exceed 50% of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product -- Addition homopolymerization products in which a single monomer contributes more than 99% by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50% of the ex-works price of the product; the value of any materials of Chapter 39 used does not exceed 20% of the ex-works price of the product [1] / or: Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product -- Other / or: Manufacture in which the value of any materials of Chapter 39 used does not exceed 20% of the ex-works price of the product 1 / or: Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product

  Foils of plastic, metallized / or: Manufacture from highly transparent polyester foils with a thickness of less than 23 micron [1] / or: Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product

• EPA SADC · Südafrika

  Foils of plastic, metallised / or: Manufacture from highly transparent polyester foils with a thickness of less than 23 micron [23] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex–works price of the product

• EU-Singapore FTA · Singapur

  Manufacture from materials of any heading, except that of the product. However materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-work price of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product [21] In the case of the products composed of materials classified within both headings 3901 to 3906, and in the case of the products within headings 3907 to 3911, this restriction only applies to that group of materials which predominates by weight in the product.

• EU-Tunisia Association Agreement · Tunesien

  Semi-manufactures and articles of plastics; except for headings ex 3916, ex 3917, ex 3920 and ex 3921, for which the rules are set out below: Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [16] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  Foils of plastic, metallised / or: Manufacture from highly-transparent polyester-foils with a thickness of less than 23 micron [18] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

Quelle: Europäische Kommission, Access2Markets (CC BY 4.0, gekürzt). Maßgeblich ist der Text des Abkommens. Access2Markets

Anmerkungen und Erläuterungen zu 3921190000

Quellen: Kombinierte Nomenklatur 2026, Anhang I der Verordnung (EWG) Nr. 2658/87 (CELEX 32025R1926), und die Erläuterungen zur Kombinierten Nomenklatur (CELEX 02019XC0329(02)-20260213). Die Abschnitts- und Kapitelanmerkungen sind rechtsverbindlich, die Erläuterungen sind Auslegungshilfen. EUR-Lex

EU-Einreihungsverordnungen zu 3921190000

Verordnungen der Kommission, die bestimmte Waren in diesen Code eingereiht haben. Sie binden den Zoll in allen Mitgliedstaaten für gleiche Waren.

• 3921 19 00 17.05.2006 · Verordnung auf EUR-Lex
  Mikroporöse Zellkunststoffplatten aus Ethylen-Vinylacetat-Copolymeren, in Rechtecke der Abmessungen 15,5 cm × 10,5 cm × 0,75 cm zugeschnitten, aber nicht anderweitig bearbeitet.

  Die Platten sind dazu bestimmt, in kleinere Stücke geschnitten, in Stempel eingesetzt und darin als Tintenreservoir verwendet zu werden.

  Begründung

  Einreihung gemäß den Allgemeinen Vorschriften 1 und 6 für die Auslegung der Kombinierten Nomenklatur, der Anmerkung 10 zu Kapitel 39 sowie nach dem Wortlaut der KN-Codes 3921 und 3921 19 00 . Da die Platten nur in Rechtecke geschnitten, jedoch nicht weiter bearbeitet wurden, können sie nicht als Stempelkissen in die Position 9612 eingereiht werden.

Britische verbindliche Zolltarifauskünfte zu 3921190000

Auskünfte von HM Revenue & Customs für Waren, deren britischer Warencode so beginnt wie dieser EU-Code. Der britische Zolltarif weicht vom EU-Tarif ab, für die EU sind sie daher nur eine Orientierung.

• UK 3921190099 Gültig vom 21.05.2024 bis 20.05.2027 · Auskunft 600010472 auf GOV.UK

  A thermal runaway protection pad which is to protect against a battery thermal runway event. It is constructed from medium density closed-cell cellular silicone foam rubber. The pad is produced in different thicknesses of either 2.0mm, 3.2mm and 4.78mm, it is also available in rolls or sheets.

  Begründung

  Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 3921: Other plates, sheets, film, foil and strip, of plastics. GIR 6 - Has been used to classify the goods to subheading level 392119: Cellular; Of other plastics. 10 DIGIT CODE 3921190099: Other than elsewhere specified. Also classified in accordance with: General section Chapter 39 note 1 & 10 Harmonised System Explanatory Notes (HSEN) to Chapter 39 Harmonised System Explanatory Notes (HSEN) to heading 3921

• UK 3921190099 Gültig vom 04.03.2025 bis 03.03.2028 · Auskunft 600012559 auf GOV.UK

  Silicone sponge The sponge can come in different thicknesses ranging from 1.59mm to 12.7mm depending on whether it is presented as a continuous roll or sheet Use: humidifier's, electric meters, filtration seals gaskets and for flame retardant insulation requirements Packaging: in rolls or sheets

  Begründung

  Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 3921 - Other plates, sheets, film, foil and strip, of plastics GIR 5b has been used to identify the type of packaging – rolls or sheets GIR 6 has been used to classify the goods to subheading level 392119 – Cellular; Of other plastics 10 digit code 3921190099 – Other than elsewhere specified Also classified in accordance with: Chapter 39 notes 1 & 10 HSEN to 3921

• UK 3921190099 Gültig vom 04.03.2025 bis 03.03.2028 · Auskunft 600012561 auf GOV.UK

  silicone foam They come in various thicknesses, the F12 (various colours, grey/white/black or brown) product ranging from 1.6mm to 25.4mm and the F20 (just available in grey), with thicknesses ranging from 0.8mm to 12.7mm Use: for insulation and sealing purposes in numerous applications and industries where, flame-retardant materials are required Packaging: in rolls and sheets

  Begründung

  Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 3921 - Other plates, sheets, film, foil and strip, of plastics GIR 5b has been used to identify the type of packaging – rolls or sheets GIR 6 has been used to classify the goods to subheading level 392119 – Cellular; Of other plastics 10 digit code 3921190099 – Other than elsewhere specified Also classified in accordance with: Chapter 39 notes 1 & 10 HSEN to 3921

Quelle: HM Revenue & Customs, Advance Tariff Rulings. Enthält Informationen des öffentlichen Sektors unter der Open Government Licence v3.0.

Beschränkungen und Hinweise für 392119

• Russland-Sanktionen: Einfuhrverbot Verordnung (EU) Nr. 833/2014, Anhang XXI 3921

  Art. 3i, Güter, die Russland erhebliche Einnahmen verschaffen

  Rechtsakt auf EUR-Lex lesen
• Russland-Sanktionen: Ausfuhrverbot Verordnung (EU) Nr. 833/2014, Anhang XXIII 3921

  Art. 3k, Güter, die zur Stärkung der industriellen Kapazitäten Russlands beitragen könnten

  Rechtsakt auf EUR-Lex lesen

Nur zur Orientierung. Prüfen Sie den Rechtsakt, bevor Sie sich auf einen Hinweis verlassen; Schwellenwerte, Ausnahmen und Genehmigungen sind nicht vollständig abgebildet.

EU-Handel 2025 für 392119

Einfuhren aus Drittländern

408,7 Mio. €

34.877 t

Ausfuhren in Drittländer

781,4 Mio. €

Wichtigste Ursprungsländer nach Einfuhrwert

1. Vereinigte Staaten 118 Mio. €
2. China 68 Mio. €
3. Südkorea 60,6 Mio. €
4. Vereinigtes Königreich 56,7 Mio. €
5. Japan 32 Mio. €

KN8-Codes unterhalb dieses Codes: 1. Quelle: Eurostat, Comext, CC BY 4.0, aufbereitet von hscode.info. Vertraulicher Handel ist keinen Codes zugeordnet.

Tarifänderungen für 392119 seit 2016

• Juli 2026 3921190053 Code eingeführt
• Jan. 2026 3 Codes Code gestrichen
• Jan. 2026 3 Codes Code eingeführt
• Jan. 2025 3921190093 Code gestrichen
• Jan. 2023 3921190070 Code gestrichen
• Jan. 2021 3921190080 Code gestrichen
• Jan. 2021 3921190045 Code eingeführt
• Juli 2019 3921190035 Code gestrichen
• Jan. 2019 3921190096 Code gestrichen
• Juli 2018 3921190035 Code eingeführt
• Jan. 2018 3 Codes Code eingeführt
• Juli 2017 3921190050 Code eingeführt

2 frühere Änderungen. Monatlicher Vergleich der TARIC-Auszüge der Europäischen Kommission. Ohne saisonale Einfuhrpreise.

Einfuhrzoll im Vereinigten Königreich für 392119

• 6%

Drittlandszollsätze aller britischen Warencodes unter dieser HS-Unterposition. Quelle: UK Department for Business and Trade, Stand 02.11.2026. Der britische Tarif weicht vom EU-Tarif ab.

Einfuhrumsatzsteuer in der EU

• Belgien 21 %
• Bulgarien 20 %
• Dänemark 25 %
• Deutschland 19 %
• Estland 24 % ggf. 9 %
• Finnland 25,5 %
• Frankreich 20 %
• Griechenland 24 %
• Irland 23 %
• Italien 22 %
• Kroatien 25 %
• Lettland 21 %
• Litauen 21 %
• Luxemburg 17 %
• Malta 18 %
• Niederlande 21 %
• Österreich 20 %
• Polen 23 %
• Portugal 23 %
• Rumänien 21 %
• Schweden 25 %
• Slowakei 23 %
• Slowenien 22 %
• Spanien 21 %
• Tschechien 21 %
• Ungarn 27 %
• Zypern 19 %

Normalsatz je Mitgliedstaat auf Zollwert, Zoll und Transportkosten bis zum Bestimmungsort. Ermäßigte Sätze hängen oft von Verwendung oder Abnehmer ab und gelten nur, wenn das Land sie für die Ware vorsieht. Quelle: Europäische Kommission, Taxes in Europe Database, Stand 02.11.2026.

Ursprungsregeln

Informationen

HS-Code Struktur

HS-Code Baumstruktur