Neu Produkt beschreiben, KN-Code erhalten. Auch als API und MCP für KI-Agenten. Kostenlos testen
Zum Inhalt springen

Zolltarifnummer 7325991000 80 - aus Gusseisen

Import Handelsbeschränkungen für 7325991000 80

Zölle für weitere Codes mit kostenlosem Konto

Sie haben heute 10 Codes mit Zollsätzen angesehen. Melden Sie sich kostenlos an, um Zölle, Maßnahmen und den Verlauf aller Codes zu sehen.

Präferenzursprungsregeln für 7325991000

Was eine Ware erfüllen muss, um als Ursprungsware eines Partnerlandes zu gelten und den Präferenzzoll zu erhalten, je Abkommen. Wortlaut der Abkommen auf Englisch.

  • Autonomous Trade Preferences (Western Balkans) · Kosovo

    EU-Chile Association Agreement · Chile

    EU-Algeria Association Agreement · Algerien

    EEA/EFTA agreements (Switzerland, Norway, Liechtenstein, Faroe Islands) · Färöer, Liechtenstein, Norwegen, Schweiz

    EU-Egypt Association Agreement · Ägypten

    EU-Georgia DCFTA · Georgien

    Generalised Scheme of Preferences (GSP, GSP+, EBA) · Armenien, Indien, Kenia, Pakistan, Salomonen, Samoa, Syrien, Vietnam

    EU-Iceland FTA · Island

    EU-Jordan Association Agreement · Jordanien

    EU-Jordan Association Agreement (relaxed rules, 2016) · Jordanien

    EU-Korea FTA · Südkorea

    EU-Central America Association Agreement

    EU-Lebanon Association Agreement · Libanon

    EU-Morocco Association Agreement · Marokko

    EU-Moldova DCFTA · Republik Moldau

    Pan-Euro-Mediterranean (PEM) Convention · Ägypten, Albanien, Andorra, Bosnien und Herzegowina, Färöer, Island, Kosovo, Liechtenstein, Montenegro, Nordmazedonien, Norwegen, Palästina, Schweiz, Türkei

    EU-Singapore FTA · Singapur

    EU-Tunisia Association Agreement · Tunesien

    EU-Ukraine DCFTA · Ukraine

    Articles of iron or steel; except for: / or: Manufacture from materials of any heading, except that of the product

  • EPA CARIFORUM

    EU Market Access Regulation (EPA) · Côte d’Ivoire, Ghana, Kamerun, Kenia

    EPA Pacific · Fidschi, Papua-Neuguinea, Salomonen, Samoa

    EU-Mexico Global Agreement · Mexiko

    EU-Palestine Interim Association Agreement · Palästina

    EPA SADC · Südafrika

    Articles of iron or steel; except for: / or: Manufacture in which all the materials used are classified within a heading other than that of the product

  • EU-Canada CETA · Kanada

    A change from any other heading.

  • EU-Colombia/Peru/Ecuador Trade Agreement · Ecuador, Kolumbien, Peru

    Articles of iron or steel; except for: / or: Manufacture from materials of any heading, except that of the product [95]

  • EPA Eastern and Southern Africa

    Sheet piling / or: Manufacture from materials of heading No 7206

  • EU-Japan EPA · Japan

    CTH

  • EU-Viet Nam FTA · Vietnam

    Articles of iron or steel; except for: / or: Manufacture from materials of any heading, except that of the product.

Quelle: Europäische Kommission, Access2Markets (CC BY 4.0, gekürzt). Maßgeblich ist der Text des Abkommens. Access2Markets

Anmerkungen und Erläuterungen zu 7325991000

Anmerkungen zu Kapitel 73

Anmerkungen 1. Als „Gusseisen“ im Sinne des Kapitels 73 gelten durch Gießen hergestellte Erzeugnisse, deren chemische Zusammensetzung nicht der für Stahl nach Anmerkung 1 d) zu Kapitel 72 entspricht und in denen Eisen gegenüber jedem anderen Element gewichtsmäßig vorherrscht. 2. Als „Draht“ im Sinne des Kapitels 73 gelten warm- oder kalthergestellte Erzeugnisse mit beliebiger Form des Querschnitts, dessen größte Abmessung 16 mm oder weniger beträgt.

Quellen: Kombinierte Nomenklatur 2026, Anhang I der Verordnung (EWG) Nr. 2658/87 (CELEX 32025R1926), und die Erläuterungen zur Kombinierten Nomenklatur (CELEX 02019XC0329(02)-20260213). Die Abschnitts- und Kapitelanmerkungen sind rechtsverbindlich, die Erläuterungen sind Auslegungshilfen. EUR-Lex

EU-Einreihungsverordnungen zu 7325991000

Verordnungen der Kommission, die bestimmte Waren in diesen Code eingereiht haben. Sie binden den Zoll in allen Mitgliedstaaten für gleiche Waren.

  • 7325 99 10 18.02.2019 · Verordnung auf EUR-Lex
    Eine kreisförmige Ware mit einem Durchmesser von etwa 500 mm und einem Gewicht von etwa 23 kg. Sie besteht aus Gusseisen mit Kugelgrafit (duktilem Gusseisen, EN-GJS-500-7). Die Ware ist zum Schutz vor Korrosion mit schwarzem Bitumen bestrichen.

    Die Ware ist gemäß der Norm EN 124 zertifiziert (Aufsätze und Abdeckungen zum Einbau in Flächen, die für Fußgänger und/oder Fahrzeugverkehr bestimmt sind) und wird als Kanaldeckel (z. B. für Regenwasserkanäle) verwendet. Siehe Abbildung (1).

    Begründung

    Einreihung gemäß den Allgemeinen Vorschriften 1 und 6 für die Auslegung der Kombinierten Nomenklatur sowie nach dem Wortlaut der KN-Codes 7325 , 7325 99 und 7325 99 90 . Eine Einreihung der Ware in den KN-Code 7325 10 00 als andere Waren aus nicht verformbarem Gusseisen ist ausgeschlossen, da sich nicht verformbares Gusseisen unter Druckspannung nicht verformt, während sich Gusseisen mit Kugelgrafit unter Zugspannung und bis zu einem gewissen Grad auch unter Druckspannung verformen lässt. Daher kann Gusseisen mit Kugelgrafit als solches nicht als nicht verformbares Gusseisen betrachtet werden (siehe hierzu analog das Urteil des Gerichtshofs vom 12. Juli 2018 in den verbundenen Rechtssachen C-397/17 und C-398/17, Profit Europe, EU:C:2018:564). Eine Einreihung der Ware in den KN-Code 7325 99 10 als andere Waren aus verformbarem Gusseisen ist ebenfalls ausgeschlossen, da sich Gusseisen mit Kugelgrafit und verformbares Gusseisen sowohl in ihrer Zusammensetzung als auch in der Art ihrer Herstellung unterscheiden. Gusseisen mit Kugelgrafit — selbst wenn es mit verformbarem Gusseisen (EN-GJM) vergleichbare Eigenschaften hat — stellt dennoch eine eigene Kategorie dar (EN-GJS) (siehe hierzu analog das Urteil des Gerichtshofs vom 12. Juli 2018 in den verbundenen Rechtssachen C-397/17 und C-398/17, Profit Europe). Die Ware ist daher in den KN-Code 7325 99 90 als „andere Waren aus Eisen oder Stahl, gegossen, andere“ einzureihen.

    Damals eingereiht in 7325 99 90

Britische verbindliche Zolltarifauskünfte zu 7325991000

Auskünfte von HM Revenue & Customs für Waren, deren britischer Warencode so beginnt wie dieser EU-Code. Der britische Zolltarif weicht vom EU-Tarif ab, für die EU sind sie daher nur eine Orientierung.

  • UK 7325991090 Gültig vom 11.09.2025 bis 10.09.2028 · Auskunft 600012976 auf GOV.UK

    The item is a Christmas tree stand made from malleable cast iron. The heavyweight design allows a tree to fit into a socket and be secured in place using the metal bolts supplied. There are two socket sizes, four or five inches and these are also used to hold water. The tree stands are finished with hand painted decorative designs in gold.

    Begründung

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). Classification has been determined in accordance with the following: - General Interpretative Rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 7325 - Other cast articles of iron or steel GIR 6 has been used to classify the goods to subheading level 7325 99 – Other than of non-malleable cast iron; Other than Grinding balls and similar articles for mills. 8-digit code 732599 10 Of cast iron. 10-digit code 73259910 90 – Other than elsewhere specified. Also classified in accordance with: Section notes 3 to Section XV Chapter notes 1 to chapter 73 Harmonised System Explanatory Notes (HSEN) to 7325

  • UK 7325991090 Gültig vom 26.02.2026 bis 25.02.2029 · Auskunft 600014996 auf GOV.UK

    A pair of Andirons (Circa 1937) designed by Melchiorre Bega (1894–1974). The andirons are constructed of both cast iron and brass, with iron providing structural strength and brass used for the sculptural decorative elements. Dimensions: Each: 25.4 x 21.6 x 36.2 cm (10 x 8 1/2 x 14 1/4 in.).

    Begründung

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). Classification has been determined in accordance with the following: - General Interpretative Rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 7325 - Other cast articles of iron or steel GIR 3B - has been used as the Cast Iron is considered to be the essential character. GIR 6 has been used to classify the goods to subheading level 7325 99 – Other than of non-malleable cast iron; Other than Grinding balls and similar articles for mills. 8-digit code 732599 10 Of cast iron. 10-digit code 73259910 90 – Other than elsewhere specified. Also classified in accordance with: Section notes 3 to Section XV Chapter notes 1 to …

  • UK 7325991090 Gültig vom 17.08.2026 bis 16.08.2029 · Auskunft 600015604 auf GOV.UK

    This ruling is for the ABR Articulated Bend Restrictors only. The ABR's provide protection and additional weight to the cable to aid the transition into burial. The component is manufactured from Spheroidal Graphite Iron grade EN-GJS-450-10. Each male spigot at either end rotates and locks out within the female collar within the subsequent component to form a bend radius suitable for both installation over-boarding and operational conditions. The 2.5m of ABR's will be provided with epoxy coating and independent cathodic protection.

    Begründung

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) GIR 1 has been used to classify this product by the terms of heading 7325 - Other cast articles of iron or steel. GIR 5(b) has been used to identify the type of packaging. GIR 6 - has been used to classify the goods to subheading level 732599 - Other 8 Digit Code 73259910 - Of Cast Iron. 10 Digit Code 7325991090 - Other Also classified in accordance with: Harmonised System Explanatory Notes (HSENs) to 7325

+ 4 weitere
  • UK 7325991090 Gültig vom 07.10.2026 bis 06.10.2029 · Auskunft 600016156 auf GOV.UK

    Cast Iron Inserts PN-002-004-590 & PN-002-004-591 The cast elements are manufactured from Spheroidal Graphite Iron (SGI) in accordance with EN 1563. Spheroidal Graphite Cast Irons, grade EN-GJS-450-10. Typical Chemical Composition (controlled at supplier/foundry level): - Carbon (C): 3.4 – 3.9 % Silicon (Si): 2.2 – 2.8 % Manganese (Mn): ≤ 0.30 % Phosphorus (P): ≤ 0.05 % Sulphur (S): ≤ 0.02 % Magnesium (Mg): 0.03 – 0.06 % (residual, to ensure spheroidal graphite formation) Iron (Fe): Balance Minor alloying elements such as Copper (Cu), Nickel (Ni), or Molybdenum (Mo) may be added in controlled and limited quantities when required to achieve the specified mechanical properties. Minimum Tensile Strength: ≥ 450 MPa, and Minimum Elongation: ≥ 10 %. The cast elements are produced using a Green Sand Casting Process with an automated High Pressure Moulding Line (HPML). Raw Material Charging and Melting Approved base iron, steel scrap, and internal returns are charged into an induction furnace. The molten iron is treated with magnesium-based alloys to convert graphite into a spheroidal (nodular) form. Green Sand (HPML) Moulds are produced on an automated high-pressure moulding line using green sand composed of silica sand, bentonite clay, water, and additives. HPML ensures high dimensional accuracy, repeatability, and stable mould quality. Molten SGI is poured into the prepared moulds under controlled temperature and pouring conditions. Castings are allowed to solidify and cool under controlled conditions to minimize defects. After cooling castings are removed from the moulds. Gates, risers, and excess material are removed through fettling operations such as cutting and grinding. For use in the offshore energy industry for pipeline protection. Insert is over moulded within a polymer product to provide asset protection, impact resistance and stabilization. Usually packed in crates.

    Begründung

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) GIR 1 has been used to classify this product by the terms of heading 7325 - Other cast articles of iron or steel. GIR 5(b) has been used to identify the type of packaging. GIR 6 - has been used to classify the goods to subheading level 732599 - Other. 8 Digit Code 73259910 - Of cast iron. 10 Digit Code - 7325991090 - Other. Also classified in accordance with: Harmonised System Explanatory Notes (HSENs) to 7325

  • UK 7325991090 Gültig vom 08.10.2026 bis 07.10.2029 · Auskunft 600016159 auf GOV.UK

    A 205ID MIU MANDREL of Cast Iron Composition. The materials are Grade ISO 1083 / JS / 450-10. Ductile iron, is a high-performance cast material in which graphite exists in the form of spherical nodules. It is a ferritic-matrix ductile iron characterized by a minimum tensile strength of 450 MPa, elongation of 10%, and good impact toughness. A blend of pig iron, steel scrap, and returns in controlled ratios is melted in induction furnaces (medium-frequency) or cupolas at ~1500–1550°C. Magnesium-bearing alloys are introduced via ladle treatment. Pouring is performed at 1300–1400°C with controlled gating to minimize turbulence and oxidation. Proper riser design and use of chills ensure directional solidification and minimize shrinkage defects. Cleaned by using a shot blasting machine. For use in the offshore energy industry for pipeline protection. Insert is over moulded within a polymer product to provide asset protection, impact resistance and stabilization. Usually packed in crates.

    Begründung

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) GIR 1 has been used to classify this product by the terms of heading 7325 - Other cast articles of iron or steel. GIR 5(b) has been used to identify the type of packaging. GIR 6 - has been used to classify the goods to subheading level 732599 - Other 8 Digit Code 73259910 - Of cast iron 10 Digit Code 7325991090 - Other Also classified in accordance with: Harmonised System Explanatory Notes (HSENs) to 7325.

  • UK 7325991090 Gültig vom 08.10.2026 bis 07.10.2029 · Auskunft 600016181 auf GOV.UK

    A 205ID MIU MANDREL of Cast Iron Composition. The materials are Grade ISO 1083 / JS / 450-10. Ductile iron, is a high-performance cast material in which graphite exists in the form of spherical nodules. It is a ferritic-matrix ductile iron characterized by a minimum tensile strength of 450 MPa, elongation of 10%, and good impact toughness. A blend of pig iron, steel scrap, and returns in controlled ratios is melted in induction furnaces (medium-frequency) or cupolas at ~1500 1550°C. Magnesium-bearing alloys are introduced via ladle treatment. Pouring is performed at 1300 1400°C with controlled gating to minimize turbulence and oxidation. Proper riser design and use of chills ensure directional solidification and minimize shrinkage defects. Cleaned by using a shot blasting machine. For use in the offshore energy industry for pipeline protection. Insert is over moulded within a polymer product to provide asset protection, impact resistance and stabilization. Usually packed in crates.

    Begründung

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) GIR 1 has been used to classify this product by the terms of heading 7325 - Other cast articles of iron or steel. GIR 5(b) has been used to identify the type of packaging. GIR 6 - has been used to classify the goods to subheading level 732599 - Other 8 Digit Code 73259910 - Of cast iron 10 Digit Code 7325991090 - Other Also classified in accordance with: Harmonised System Explanatory Notes (HSENs) to 7325.

  • UK 7325991090 Gültig vom 13.10.2026 bis 12.10.2029 · Auskunft 600016182 auf GOV.UK

    A 205ID JIU BODY of Cast Iron Composition. The materials are Grade ISO 1083 / JS / 450-10. Ductile iron, is a high-performance cast material in which graphite exists in the form of spherical nodules. It is a ferritic-matrix ductile iron characterized by a minimum tensile strength of 450 MPa, elongation of 10%, and good impact toughness. A blend of pig iron, steel scrap, and returns in controlled ratios is melted in induction furnaces (medium-frequency) or cupolas at ~1500 1550°C. Magnesium-bearing alloys are introduced via ladle treatment and Pouring is performed at 1300 1400°C with controlled gating to minimize turbulence and oxidation. Proper riser design and use of chills ensure directional solidification and minimize shrinkage defects. Cleaned by using a shot blasting machine. For use in the offshore energy industry for pipeline protection. Insert is over moulded within a polymer product to provide asset protection, impact resistance and stabilization. Usually packed in crates.

    Begründung

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) GIR 1 has been used to classify this product by the terms of heading 7325 - Other cast articles of iron or steel. GIR 5(b) has been used to identify the type of packaging. GIR 6 - has been used to classify the goods to subheading level 732599 - Other 8 Digit Code 73259910 - Of Cast Iron. 10 Digit Code 7325991090 - Other Also classified in accordance with: Harmonised System Explanatory Notes (HSENs) to 7325

Quelle: HM Revenue & Customs, Advance Tariff Rulings. Enthält Informationen des öffentlichen Sektors unter der Open Government Licence v3.0.

Beschränkungen und Hinweise für 73259910

  • Russland-Sanktionen: Einfuhrverbot Verordnung (EU) Nr. 833/2014, Anhang XVII 7325

    Art. 3g, Eisen- und Stahlerzeugnisse

    Rechtsakt auf EUR-Lex lesen
  • Russland-Sanktionen: Ausfuhrverbot Verordnung (EU) Nr. 833/2014, Anhang XXIII 7325

    Art. 3k, Güter, die zur Stärkung der industriellen Kapazitäten Russlands beitragen könnten

    Rechtsakt auf EUR-Lex lesen

Nur zur Orientierung. Prüfen Sie den Rechtsakt, bevor Sie sich auf einen Hinweis verlassen; Schwellenwerte, Ausnahmen und Genehmigungen sind nicht vollständig abgebildet.

Zollkontingente für 73259910

  • Offen 09.7163 Ursprung: Kolumbien

    Other cast articles of iron or steel

    01.08.2026 – 31.07.2027

    50.000.000 Kilograms
    Restmenge (100 %)
    Volumen 50.000.000
  • Offen 09.7194 Ursprung: Peru

    Other cast articles of iron or steel

    01.03.2026 – 28.02.2027

    50.000.000 Kilograms
    Restmenge (100 %)
    Volumen 50.000.000
  • Offen 09.7512 Ursprung: Ecuador

    Other cast articles of iron or steel

    01.01.2026 – 31.12.2026

    50.000.000 Kilograms
    Restmenge (100 %)
    Volumen 50.000.000

Quelle: Europäische Kommission, Berichte zu Zollkontingenten, Stand 30.10.2026. Die Restmengen ändern sich täglich.

EU-Handel 2025 für 73259910

Einfuhren aus Drittländern
394,1 Mio. €
258.413 t
Ausfuhren in Drittländer
126,5 Mio. €

Wichtigste Ursprungsländer nach Einfuhrwert

  1. China 159,7 Mio. €
  2. Indien 107,1 Mio. €
  3. Türkei 81,2 Mio. €
  4. Vereinigtes Königreich 14,9 Mio. €
  5. Iran 9,5 Mio. €

Werte für den KN8-Code 73259910. Quelle: Eurostat, Comext, CC BY 4.0, aufbereitet von hscode.info. Vertraulicher Handel ist keinen Codes zugeordnet.

Tarifänderungen für 73259910 seit 2016

  • Juni 2020 3 Codes Code eingeführt
  • Jan. 2020 2 Codes Code gestrichen
  • Jan. 2020 2 Codes Code eingeführt
  • Apr. 2019 5 Codes Code gestrichen
  • Apr. 2019 7325991055 Code eingeführt
  • Apr. 2018 7325991035 Code eingeführt
  • Sept. 2017 3 Codes Code eingeführt

Monatlicher Vergleich der TARIC-Auszüge der Europäischen Kommission. Ohne saisonale Einfuhrpreise.

Einfuhrzoll im Vereinigten Königreich für 732599

  • 0%

Drittlandszollsätze aller britischen Warencodes unter dieser HS-Unterposition. Quelle: UK Department for Business and Trade, Stand 02.11.2026. Der britische Tarif weicht vom EU-Tarif ab.

Einfuhrumsatzsteuer in der EU

  • Belgien 21 %
  • Bulgarien 20 %
  • Dänemark 25 %
  • Deutschland 19 %
  • Estland 24 %
  • Finnland 25,5 %
  • Frankreich 20 %
  • Griechenland 24 %
  • Irland 23 %
  • Italien 22 %
  • Kroatien 25 % ggf. 13 %
  • Lettland 21 %
  • Litauen 21 %
  • Luxemburg 17 %
  • Malta 18 % ggf. 5 %
  • Niederlande 21 %
  • Österreich 20 %
  • Polen 23 %
  • Portugal 23 %
  • Rumänien 21 %
  • Schweden 25 %
  • Slowakei 23 %
  • Slowenien 22 %
  • Spanien 21 %
  • Tschechien 21 %
  • Ungarn 27 %
  • Zypern 19 %

Normalsatz je Mitgliedstaat auf Zollwert, Zoll und Transportkosten bis zum Bestimmungsort. Ermäßigte Sätze hängen oft von Verwendung oder Abnehmer ab und gelten nur, wenn das Land sie für die Ware vorsieht. Quelle: Europäische Kommission, Taxes in Europe Database, Stand 02.11.2026.

Ursprungsregeln

Die Präferenzursprungsregeln für die Unterposition 732599 hängen vom Handelsabkommen ab. Die Kommission veröffentlicht sie in Access2Markets.

Ursprungsregeln bei Access2Markets

Informationen

Wenn Sie "aus Gusseisen" importieren oder exportieren, ist es wichtig, den richtigen HS-Code oder TARIC-Code zu haben. Der HS-Code 7325991000 80 ist der Standardcode für dieses Produkt und stellt sicher, dass die richtigen Zölle und Abgaben bei einer Überquerung internationaler Grenzen angewendet werden.

Um sicherzustellen, dass Ihre Geschäftsabwicklung bei der Einfuhr oder Ausfuhr von "aus Gusseisen" reibungslos verläuft, sollten Sie folgende Punkte beachten:

  1. Informieren Sie sich über die spezifischen Einfuhr- und Ausfuhrbestimmungen in den beteiligten Ländern. Dazu gehören mögliche Beschränkungen, Steuern und Zölle, die auf "aus Gusseisen" anwendbar sind.
  2. Prüfen Sie, ob zusätzliche Lizenzen, Genehmigungen oder Zertifikate erforderlich sind, um "aus Gusseisen" in das Zielland zu importieren oder aus dem Herkunftsland zu exportieren.
  3. Achten Sie darauf, dass Ihre Handelspartner über gültige Identifikationsnummern verfügen, wie zum Beispiel die EORI-Nummer (Economic Operators Registration and Identification) in der EU, um den Handel effizienter zu gestalten und Verzögerungen zu minimieren.
  4. Stellen Sie sicher, dass alle handels- und zollrelevanten Dokumente (wie Handelsrechnungen, Packlisten, Ursprungszertifikate und Versicherungspolicen) korrekt ausgefüllt sind und den jeweiligen nationalen Vorschriften entsprechen.
  5. Behalten Sie die aktuellen Wechselkurse sowie die Kosten für Verpackung, Versand und Versicherung im Blick, um eine genaue Kalkulation der Handelskosten durchzuführen.

Zusammenfassend lautet der HS-Code oder TARIC-Code für "aus Gusseisen" 7325991000 80. Stellen Sie sicher, dass Sie diesen Code in all Ihren Handels- und Zolldokumenten korrekt verwenden, um eine reibungslose und problemlose Transaktion zu gewährleisten. Mit diesen Tipps sind Sie besser auf die Herausforderungen im internationalen Handel vorbereitet und können erfolgreich "aus Gusseisen" importieren und exportieren.

HS-Code Struktur

73
HS Kapitel
25
HS Position
99
HS Unterposition
10
KN Position
00
TARIC Unterposition
80
Zusätzliche TARIC Codes

1. HS Kapitel

Es gibt 21 unterschiedliche Abschnitte, die in 96 Kapitel unterteilt sind. Ausnahmekapitel beinhalten Kapitel 77, welches für zukünftige Nutzung reserviert ist, Kapitel 98 und 99, die auf nationaler Ebene begrenzt sind, und Kapitel 99, welches ein spezifischer Code für temporäre Änderungen ist. Im obigen Beispiel wurde Kapitel 73 ausgewählt, für waren aus eisen oder stahl

2. HS Position

Die Überschrift bestimmt die spezifische Kategorie innerhalb eines bestimmten Kapitels. Im obigen Beispiel bezieht sich die 25 auf Andere Waren aus Eisen oder Stahl, gegossen.

3. HS Unterposition

Die letzten beiden Ziffern des internationalen Harmonisierten Codes sind spezifischer und definieren Unterkategorien von Produkten. Im obigen Beispiel bezieht sich die 99 auf aus Gusseisen.

HS-Code Baumstruktur

7300000000 80

HS Kapitel WAREN AUS EISEN ODER STAHL

7325000000 80

Andere Waren aus Eisen oder Stahl, gegossen

7325100000 80

- aus nicht verformbarem Gusseisen

7325100010 80

- - Rinnenroste und Gussaufsätze nach EN 1433 als Bestandteil für Rinnen aus Polymer, Kunststoff, verzinktem Stahl oder Beton, durch die Oberflächenwasser in die Rinne fließen kann

7325100015 80

- - Bodenabläufe, Dachabläufe, Reinigungsöffnungen und Abdeckungen für Reinigungsöffnungen nach EN 1253

7325100020 80

- - Steigeisen, Hebeschlüssel und Hydranten

7325100031 10

- - andere

7325100031 80

- - - Gusseisen mit lamellarem Grafit (Grauguss) und Teile davon, verwendet - zur Abdeckung von ober- oder unterirdischen Systemen und/oder als Öffnungen für ober- oder unterirdische Systeme, sowie - zur Ermöglichung des Zugangs zu ober- oder unterirdischen Systemen und/oder zur Ermöglichung einer Sichtprüfung von ober- oder unterirdischen Systemen

7325100099 80

- - - andere

7325910000 10

- andere

7325910000 80

- - Mahlkugeln und ähnliche Mahlkörper

7325990000 80

- - andere

7325991000 80

- - - aus Gusseisen

7325991031 80

- - - - Rinnenroste und Gussaufsätze nach EN 1433 als Bestandteil für Rinnen aus Polymer, Kunststoff, verzinktem Stahl oder Beton, durch die Oberflächenwasser in die Rinne fließen kann

7325991035 80

- - - - Bodenabläufe, Dachabläufe, Reinigungsöffnungen und Abdeckungen für Reinigungsöffnungen nach EN 1253

7325991040 80

- - - - Steigeisen, Hebeschlüssel und Hydranten

7325991060 80

- - - - Gusseisen mit Kugelgrafit (auch bekannt als duktiles Gusseisen) und Teile davon, verwendet - zur Abdeckung von ober- oder unterirdischen Systemen und/oder als Öffnungen für ober- oder unterirdische Systeme, sowie - zur Ermöglichung des Zugangs zu ober- oder unterirdischen Systemen und/oder zur Ermöglichung einer Sichtprüfung von ober- oder unterirdischen Systemen

7325991090 80

- - - - andere

7325999000 80

- - - andere

7325999010 80

- - - - Klemm- und Rohrschellen, Abstandhalter und Stütz-, Anschluss- und Klemmvorrichtungen, für bestimmte Luftfahrzeuge

7325999020 80

- - - - Vorrichtungen zum Verstauen und Befestigen der Fracht, für bestimmte Luftfahrzeuge

7325999030 80

- - - - im Frachtladesystem verwendete Kugeln, für bestimmte Luftfahrzeuge

7325999090 80

- - - - andere