Import Handelsbeschränkungen für 7604290000 80
Zölle für weitere Codes mit kostenlosem Konto
Sie haben heute 10 Codes mit Zollsätzen angesehen. Melden Sie sich kostenlos an, um Zölle, Maßnahmen und den Verlauf aller Codes zu sehen.
Präferenzursprungsregeln für 7604290000
Was eine Ware erfüllen muss, um als Ursprungsware eines Partnerlandes zu gelten und den Präferenzzoll zu erhalten, je Abkommen. Wortlaut der Abkommen auf Englisch.
Autonomous Trade Preferences (Western Balkans) · Kosovo
EU-Chile Association Agreement · Chile
EU-Algeria Association Agreement · Algerien
EEA/EFTA agreements (Switzerland, Norway, Liechtenstein, Faroe Islands) · Färöer, Liechtenstein, Norwegen, Schweiz
EU-Egypt Association Agreement · Ägypten
EU-Georgia DCFTA · Georgien
EU-Jordan Association Agreement · Jordanien
EU-Central America Association Agreement
EU-Morocco Association Agreement · Marokko
EU-Moldova DCFTA · Republik Moldau
Pan-Euro-Mediterranean (PEM) Convention · Ägypten, Albanien, Andorra, Bosnien und Herzegowina, Färöer, Island, Kosovo, Liechtenstein, Montenegro, Nordmazedonien, Norwegen, Palästina, Schweiz, Türkei
EU-Tunisia Association Agreement · Tunesien
EU-Ukraine DCFTA · Ukraine
Aluminium and articles thereof; except for: / or: Manufacture: from materials of any heading, except that of the product, and in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
Generalised Scheme of Preferences (GSP, GSP+, EBA) · Armenien, Indien, Kenia, Pakistan, Salomonen, Samoa, Syrien, Vietnam
EU-Jordan Association Agreement (relaxed rules, 2016) · Jordanien
EU-Singapore FTA · Singapur
Aluminium and articles thereof; except for: / or: Manufacture from materials of any heading, except that of the product
EPA CARIFORUM
EPA Pacific · Fidschi, Papua-Neuguinea, Salomonen, Samoa
Aluminium and articles thereof; except for: / or: Manufacture in which: – all the materials used are classified within a heading other than that of the product; – the value of all the materials used does not exceed 50 % of the ex-works price of the product
EU-Canada CETA · Kanada
A change from any other heading.
EU-Colombia/Peru/Ecuador Trade Agreement · Ecuador, Kolumbien, Peru
Aluminium bars, rods and profiles, wire, plates and sheets / or: Manufacture: from materials of any heading, except that of the product, and in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product
EPA Eastern and Southern Africa
Unwrought aluminium / or: Manufacture in which: all the materials used are classified within a heading other than that of the product; and the value of all the materials used does not exceed 50 % of the ex-works price of the product / or: Manufacture by thermal or electrolytic treatment from unalloyed aluminium or waste and scrap of aluminium
EU Market Access Regulation (EPA) · Côte d’Ivoire, Ghana, Kamerun, Kenia
Aluminium and articles thereof; except for: / or: Manufacture in which: all the materials used are classified within a heading other than that of the product; the value of all the materials used does not exceed 50 % of the ex-works price of the product
EU-Iceland FTA · Island
Aluminium and articles thereof; except for: / or: Manufacture: – from materials of any heading, except that of the product, and – in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
EU-Japan EPA · Japan
CTH and MaxNOM 50 % (EXW); or CTH and RVC 55 % (FOB).
EU-Korea FTA · Südkorea
Aluminium bars, rods and profiiles / or: Manufacture: – from materials of any heading, except that of the product, and – in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
EU-Lebanon Association Agreement · Libanon
Aluminium and articles thereof; except for: / or: Manufacture: from materials of any heading, except that of the product, in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
EU-Mexico Global Agreement · Mexiko
Aluminium and articles thereof; except for: / or: Manufacture in which: all the materials used are classified within a heading other than that of the product, the value of all the materials used does not exceed 50 % of the ex-works price of the product
EU-Palestine Interim Association Agreement · Palästina
Aluminium and articles thereof; except for: / or: Manufacture in which: all the materials used are classified within a heading other than that of the product; the value of all the materials used does not exceed 50% of the ex-works price of the product
EPA SADC · Südafrika
Aluminium and articles thereof; except for: / or: Manufacture in which: all the materials used are classified within a heading other than that of the product; the value of all the materials used does not exceed 50 % of the ex–works price of the product
EU-Viet Nam FTA · Vietnam
Aluminium and articles thereof, except: / or: Manufacture from materials of any heading, except that of the product.
Quelle: Europäische Kommission, Access2Markets (CC BY 4.0, gekürzt). Maßgeblich ist der Text des Abkommens. Access2Markets
Anmerkungen und Erläuterungen zu 7604290000
Anmerkungen zu Kapitel 76
Unterpositions-Anmerkungen Zusätzliche Anmerkungen 1. Im Sinne der Unterpositionen 7601 10 10, 7601 20 30 und 7601 20 40 gelten als: — Barren: Waren in Rohform mit über die gesamte Länge gleich bleibendem Querschnitt in Form eines Rechtecks oder anderen Vielecks, mit einer Breite von mehr als 800 mm und einer Dicke von mehr als 280 mm, wobei die Länge immer die Breite und die Dicke überschreitet. Diese Waren sind zum Walzen bestimmt; — Bolzen: Waren in Rohform mit über die gesamte Länge gleich bleibendem Querschnitt in Form eines Kreises (einschließlich „abgeflachte Kreise“), mit einem Durchmesser von mehr als 125 mm. 2. Im Sinne der Unterpositionen 7606 12 11 und 7606 12 19 gelten als: — Bänder für Getränkedosenkörper: Bleche oder Bänder in Rollen, gewalzt, mit Mangan und Magnesium als Hauptlegierungselementen und mit einer Mindestzugfestigkeit von 262 MPa. Die Bleche oder Bänder haben über die gesamte Länge einen gleichbleibenden Querschnitt, eine Breite von 300 mm oder mehr, jedoch nicht mehr als 2 000 mm und eine Dicke von mehr als 0,2 mm, jedoch nicht mehr als 0,4 mm, wobei die Länge immer die Breite und die Dicke überschreitet. Die Bänder für Getränkedosenkörper sind vorgeschmiert und haben eine glänzende Oberfläche; — Bänder für Getränkedosendeckel und Getränkedosenlaschen: Bleche oder Bänder in Rollen, gewalzt, mit Magnesium als Hauptlegierungselement und mit einer Mindestzugfestigkeit von 345 MPa. Die Bleche oder Bänder haben über die gesamte Länge einen gleichbleibenden Querschnitt, eine Breite von 30 mm oder mehr, jedoch nicht mehr als 2 000 mm und eine Dicke von mehr als 0,2 mm, jedoch nicht mehr als 0,35 mm, wobei die Länge immer die Breite und die Dicke überschreitet. Die Bänder für Getränkedosendeckel sind auf beiden Seiten lackiert. Die Bänder für Getränkedosenlaschen sind entfettet und geölt. Diese Waren werden für die Herstellung von starren Getränkedosen, einschließlich der Getränkedosendeckel und Getränkedosenlaschen, verwendet. 3. Im Sinne der Unterpositionen 7606 11 30, 7606 12 30 und 7607 20 91 gelten als: — Aluminium-Verbundplatte: Laminierte Erzeugnisse aus zwei flachgewalzten Aluminiumblechen oder -folien, auch mit Legierung, jeweils mit einer Dicke von 0,08 mm oder mehr, jedoch nicht mehr als 0,55 mm, und einem durchgehenden Kern aus nichtporösen Polymer- oder Mineralstoffen, zusammengehalten durch einen Klebstoff, mit einer Gesamtdicke von 1,0 mm oder mehr, jedoch nicht mehr als 6,1 mm. Die beiden äußeren Deckbleche oder -folien können unterschiedliche Oberflächenbehandlungen aufweisen. Die Waren dürfen nicht gerollt sein.
Quellen: Kombinierte Nomenklatur 2026, Anhang I der Verordnung (EWG) Nr. 2658/87 (CELEX 32025R1926), und die Erläuterungen zur Kombinierten Nomenklatur (CELEX 02019XC0329(02)-20260213). Die Abschnitts- und Kapitelanmerkungen sind rechtsverbindlich, die Erläuterungen sind Auslegungshilfen. EUR-Lex
Britische verbindliche Zolltarifauskünfte zu 7604290000
Auskünfte von HM Revenue & Customs für Waren, deren britischer Warencode so beginnt wie dieser EU-Code. Der britische Zolltarif weicht vom EU-Tarif ab, für die EU sind sie daher nur eine Orientierung.
- UK 7604299090 Gültig vom 07.01.2024 bis 06.01.2027 · Auskunft 600009306 auf GOV.UK
Aluminium alloy extruded bar (unassembled) that may or may not be powder coated, which is to be used in balustrade for guarding the edge of balconies. This bar is made from aluminium alloy grade 6063 T6, which has a maximum weight of 97.50% aluminium. It is made from extruded from molten aluminium alloy. These bars are mounted vertically about 100mm apart onto a balcony, with a handrail fitted on top. They are packaged/presented by being individually wrapped with a protective layer interweaved between bundles and layers of bars inside plywood crate, or a protective layer with polythene shrink wrapping on a pallet.
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 Has been used to classify this product by the terms of heading 7604 - Aluminium bars, rods and profiles GIR 2 (a) - Has been used as the goods are unassembled GIR 5b - Has been used to identify the type of packaging GIR 6 - Has been used to classify the goods to subheading level 760429 - Of aluminium alloys; Other than hollow profiles 8 Digit Code 76042990 – Profiles 10 Code 7604299090 - Other than bearing a specific manufacture number, for use in certain types of aircraft; Other than conical shapes for reinforcing lateral rudders, for use in certain types of aircraft Also Classified in Accordance with: …
- UK 7604299090 Gültig vom 04.01.2024 bis 03.01.2027 · Auskunft 600009307 auf GOV.UK
Aluminium alloy extruded decking profile (unassembled profiles) with grooves running down (parallel) length of profile, may or may not be powder coated. It is fitted onto a balcony frame to provide a floor for the balcony. Made from aluminium alloy grade 6063 T6, maximum aluminium % weight does not apply to this product, it is extruded from molten aluminium alloy. The decking profiles are laid on top of a balcony base frame and fixed down with special clips which fit into the side of each profile. That completes the floor of the balcony. Packaged/presented: these profiles are packed one inside another and layered on a pallet with protective layer interleaved and polythene shrink wrap around the outside. Typical uses of 6063 aluminium alloy include: furniture, doors, window frames, architectural profiles, decorative finishes, plumbing, railings, truck and trailer floors, electrical and electronic parts, highway signs, hospital and medical equipment, kitchen equipment, radiators; Extrusions in trains, cars and airplanes.
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 Has been used to classify this product by the terms of heading 7604 - Aluminium bars, rods and profiles GIR 2 (a) - Has been used as the goods are unassembled GIR 5b - Has been used to identify the type of packaging - Packaged/presented: these profiles are packed one inside another and layered on a pallet with protective layer interleaved and polythene shrink wrap around the outside GIR 6 - Has been used to classify the goods to subheading level 7604 29 - Of aluminium alloys; Other than hollow profiles 8 - Digit Code 760429 90 - Profiles 10 Code 7604299090 - Other than elsewhere specified within this subheading …
- UK 7604299090 Gültig vom 30.01.2024 bis 29.01.2027 · Auskunft 600009308 auf GOV.UK
Aluminium alloy extruded handrail profile (unassembled), may or may not be powder coated. The profile (tapered top) is fitted on top of a balustrade to provide guarding for a balcony. They are made from aluminium alloy grade 6063 T6 with a standard length of 5800mm. The handrail profile is extruded from molten aluminium alloy. The handrail fixes on to a flat core rail on top of vertical balustrade bars. This finishes off the balustrade of a balcony. Packaged/presented: The handrail profile is packed one inside another and layered on a pallet with protective layer interleaved and polythene shrink wrap around the outside. Typical uses of 6063 aluminium alloy include: furniture, doors, window frames, architectural profiles, decorative finishes, plumbing, railings, truck and trailer floors, electrical and electronic parts, highway signs, hospital and medical equipment, kitchen equipment, radiators; Extrusions in trains, cars and airplanes.
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 Has been used to classify this product by the terms of heading 7604 - Aluminium bars, rods and profiles GIR 2 (a) - Has been used as the goods are unassembled GIR 5b - Has been used to identify the type of packaging - Packaged/presented: these profiles are packed one inside another and layered on a pallet with protective layer interleaved and polythene shrink wrap around the outside GIR 6 - Has been used to classify the goods to subheading level 7604 29 - Of aluminium alloys; Other than hollow profiles 8 - Digit Code 760429 90 - Profiles 10 Code 7604299090 - Other than elsewhere specified within this subheading …
+ 6 weitere
- UK 7604299090 Gültig vom 29.04.2024 bis 28.04.2027 · Auskunft 600010256 auf GOV.UK
50 x 50mm Aluminium Angle Profile - aluminium alloy Al%: 98.8% The material is: Aluminium Angle 50 x 50mm Aluminium T6 (3mm thick) in 5 Metre length, uncoated / mill finish. The goods are used to make signs. Profiles come packed in 10's and palletised.
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIR)s: GIR 1 Has been used to classify this product by the terms of heading 7604 - Aluminium bars, rods and profiles GIR 5b - Has been used to identify the type of packaging - Profiles come packed in 10's and palletised. GIR 6 - Has been used to classify the goods to subheading level 7604 29 - Of aluminium alloys; Other than hollow profiles 8 - Digit Code 760429 90 - Profiles 10 Code 7604299090 - Other than elsewhere specified within this subheading Also classified in accordance with :- Subheading Note 1 to Chapter 76 Harmonised Standard Explanatory Notes (HSENs) to heading – 7604 Harmonised Standard Explanatory Notes (HSENs) to …
- UK 7604299090 Gültig vom 18.07.2025 bis 17.07.2028 · Auskunft 600013383 auf GOV.UK
This is a Solid aluminium profile and will be powder coated Ral 9010 gloss Length is 5.80M x Width 41MM x Height 41MM The aluminium is alloyed, and the content is less than 99% aluminium Each bundle is wrapped in shrink film and loaded directly into the container. To be used in the construction of tables and benches in bespoke sizes, it will be cut to length, drilled and assembled.
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIRs): GIR 1 has been used to classify this product by the terms of heading 7604 - Aluminium bars, rods and profiles GIR 5b has been used to identify the type of packaging GIR 6 has been used to classify the goods to subheading level 760429 - Of aluminium alloys; Other than hollow profiles 8-digit code 76042990 - Profiles 10-digit code 7604299090 - Other than elsewhere specified within this subheading Also classified in accordance with: Section Note 3 to Section XV Section Note 5 to Section XV Section Note 9(b) to Section XV Subheading Note 1(b) to Chapter 76 Harmonised Standard Explanatory Notes (HSENs) to heading 7604
- UK 7604299090 Gültig vom 20.08.2025 bis 19.08.2028 · Auskunft 600013429 auf GOV.UK
Aluminium extrusion Elec Aluminium alloy 6063 T6 Solid channel profile that will be powder coated Ral 9010 gloss Shipped in 5800mm lengths The aluminium profile is pasted by a protective PVC film on the flat surface with a decorative surface larger than 25mm, and each bundle is bundled with shrink film and loaded directly into the container.
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIRs): GIR 1 has been used to classify this product by the terms of heading 7604 - Aluminium bars, rods and profiles GIR 5b has been used to identify the type of packaging GIR 6 has been used to classify the goods to subheading level 760429 - Of aluminium alloys; Other than hollow profiles 8-digit code 76042990 - Profiles 10-digit code 7604299090 - Other than elsewhere specified within this subheading Also classified in accordance with: Section Note 3 to Section XV Section Note 5 to Section XV Section Note 9(b) to Section XV Subheading Note 1(b) to Chapter 76 Harmonised Standard Explanatory Notes (HSENs) to heading 7604
- UK 7604299090 Gültig vom 03.09.2025 bis 02.09.2028 · Auskunft 600013430 auf GOV.UK
This is a solid flat aluminium profile and will be powder coated Ral 9010 gloss Length is 5.80M The aluminium is alloyed, and the content is less than 99% aluminium Each bundle is wrapped in shrink film and loaded directly into the container. To be used in the construction of tables and benches in bespoke sizes, it will be cut to length, drilled and assembled.
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIRs): GIR 1 has been used to classify this product by the terms of heading 7604 - Aluminium bars, rods and profiles GIR 5b has been used to identify the type of packaging GIR 6 has been used to classify the goods to subheading level 760429 - Of aluminium alloys; Other than hollow profiles 8-digit code 76042990 - Profiles 10-digit code 7604299090 - Other than elsewhere specified within this subheading Also classified in accordance with: Section Note 3 to Section XV Section Note 5 to Section XV Section Note 9(b) to Section XV Subheading Note 1(b) to Chapter 76 Harmonised Standard Explanatory Notes (HSENs) to heading 7604
- UK 7604299090 Gültig vom 01.12.2025 bis 30.11.2028 · Auskunft 600013945 auf GOV.UK
The product consists of aluminium profiles supplied in sections, designed to create temporary flooring solutions for vehicles. Each profile is made as a standalone unit and to interlock with others, allowing users to assemble them easily by clicking the sections together. This assembly process results in a stable and continuous road surface suitable for vehicular movement. The product is supplied with steel bolts, washers and nuts which are both tightened and secured in place using adhesive. This ensures the flooring remains strong and stable during use. Additionally, the side panels of the flooring are designed to snap together, further enhancing the overall structural integrity of the assembled road. This product is suitable for a variety of uses, including the creation of temporary pathways and deployment in rugged terrain where a durable and reliable flooring solution is required.
Begründung
Classification has been determined in accordance with the following: - For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1) b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIRs): - GIR 1 Has been used to classify this product by the terms of heading 7604 - Aluminium bars, rods and profiles. GIR 6 - Has been used to classify the goods to subheading level 760429 - Of aluminium alloys; other than hollow profiles. 8 Digit Code 76042990 – Profiles. 10 Code 7604299090 - other than elsewhere specified within this subheading. Also Classified in Accordance with: - Section XV Note 3, 5, 6, 9(b) Harmonized System Explanatory Notes (HSENs) to Chapter 76 04
- UK 7604299090 Gültig vom 01.12.2025 bis 30.11.2028 · Auskunft 600013946 auf GOV.UK
The product consists of aluminium profiles supplied in sections, designed to create temporary flooring solutions for vehicles. Each profile is made as a standalone unit and to interlock with others, allowing users to assemble them easily by clicking the sections together. This assembly process results in a stable and continuous road surface suitable for vehicular movement. The product is supplied with steel bolts, washers and nuts which are both tightened and secured in place using adhesive. This ensures the flooring remains strong and stable during use. Additionally, the side panels of the flooring are designed to snap together, further enhancing the overall structural integrity of the assembled road. This product is suitable for a variety of uses, including the creation of temporary pathways and deployment in rugged terrain where a durable and reliable flooring solution is required.
Begründung
Classification has been determined in accordance with the following: - For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1) b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIRs): - GIR 1 Has been used to classify this product by the terms of heading 7604 - Aluminium bars, rods and profiles. GIR 6 - Has been used to classify the goods to subheading level 760429 - Of aluminium alloys; other than hollow profiles. 8 Digit Code 76042990 – Profiles. 10 Code 7604299090 - other than elsewhere specified within this subheading. Also Classified in Accordance with: - Section XV Note 3, 5, 6, 9(b) Harmonized System Explanatory Notes (HSENs) to Chapter 7604
Quelle: HM Revenue & Customs, Advance Tariff Rulings. Enthält Informationen des öffentlichen Sektors unter der Open Government Licence v3.0.
Beschränkungen und Hinweise für 76042900
- CBAM: CO2-Grenzausgleich Verordnung (EU) 2023/956, Anhang I 7604
Sektor: Aluminium
Rechtsakt auf EUR-Lex lesen - Russland-Sanktionen: Einfuhrverbot Verordnung (EU) Nr. 833/2014, Anhang XXI 7604
Art. 3i, Güter, die Russland erhebliche Einnahmen verschaffen
Rechtsakt auf EUR-Lex lesen - Güter mit doppeltem Verwendungszweck Verordnung (EU) 2021/821, Anhang I 76042910
Gilt nur für einen Teil der Waren unter diesem Code (Rechtsakt nennt 76042910).
Möglicherweise Dual-Use; Eintrag 1C002b, 1C202a, 1C002d in Anhang I prüfen (Korrelationstabelle unverbindlich)
Rechtsakt auf EUR-Lex lesen - Güter mit doppeltem Verwendungszweck Verordnung (EU) 2021/821, Anhang I 76042990
Gilt nur für einen Teil der Waren unter diesem Code (Rechtsakt nennt 76042990).
Möglicherweise Dual-Use; Eintrag 1C202a in Anhang I prüfen (Korrelationstabelle unverbindlich)
Rechtsakt auf EUR-Lex lesen
Nur zur Orientierung. Prüfen Sie den Rechtsakt, bevor Sie sich auf einen Hinweis verlassen; Schwellenwerte, Ausnahmen und Genehmigungen sind nicht vollständig abgebildet. Die Dual-Use-Tabelle ordnet Codes Einträgen der Kontrollliste zu und ist unverbindlich.
Zollkontingente für 76042900
- Offen 09.6006 Ursprung: Vereinigtes Königreich
Aluminium products and articles of aluminium (excluding aluminium wire and aluminium foil) Aluminium wire Aluminium foil New description from 1/01/2027: Aluminium bars, rods and profiles; Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm; Aluminium foil
01.01.2026 – 31.12.2026
67.854.080 KilogramsRestmenge (94,2 %)Volumen 72.000.000
Quelle: Europäische Kommission, Berichte zu Zollkontingenten, Stand 30.10.2026. Die Restmengen ändern sich täglich.
EU-Handel 2025 für 76042900
- Einfuhren aus Drittländern
- 1,1 Mrd. €
- 229.971 t
- Ausfuhren in Drittländer
- 1,3 Mrd. €
Wichtigste Ursprungsländer nach Einfuhrwert
Türkei 604,2 Mio. €
China 65,4 Mio. €
Bosnien und Herzegowina 61,5 Mio. €
Schweiz 59,3 Mio. €
Norwegen 57,7 Mio. €
Werte für den KN8-Code 76042900. Quelle: Eurostat, Comext, CC BY 4.0, aufbereitet von hscode.info. Vertraulicher Handel ist keinen Codes zugeordnet.
Tarifänderungen für 76042900 seit 2016
- Jan. 2026 4 Codes Code gestrichen
- Jan. 2021 7604291020 Code gestrichen
- Jan. 2019 7604299030 Code gestrichen
Monatlicher Vergleich der TARIC-Auszüge der Europäischen Kommission. Ohne saisonale Einfuhrpreise.
Einfuhrzoll im Vereinigten Königreich für 760429
- 6%
Drittlandszollsätze aller britischen Warencodes unter dieser HS-Unterposition. Quelle: UK Department for Business and Trade, Stand 02.11.2026. Der britische Tarif weicht vom EU-Tarif ab.
Einfuhrumsatzsteuer in der EU
- Belgien 21 %
- Bulgarien 20 %
- Dänemark 25 %
- Deutschland 19 %
- Estland 24 %
- Finnland 25,5 %
- Frankreich 20 %
- Griechenland 24 %
- Irland 23 %
- Italien 22 %
- Kroatien 25 %
- Lettland 21 %
- Litauen 21 %
- Luxemburg 17 %
- Malta 18 %
- Niederlande 21 %
- Österreich 20 %
- Polen 23 %
- Portugal 23 %
- Rumänien 21 %
- Schweden 25 %
- Slowakei 23 %
- Slowenien 22 %
- Spanien 21 %
- Tschechien 21 %
- Ungarn 27 %
- Zypern 19 %
Normalsatz je Mitgliedstaat auf Zollwert, Zoll und Transportkosten bis zum Bestimmungsort. Ermäßigte Sätze hängen oft von Verwendung oder Abnehmer ab und gelten nur, wenn das Land sie für die Ware vorsieht. Quelle: Europäische Kommission, Taxes in Europe Database, Stand 02.11.2026.
Ursprungsregeln
Die Präferenzursprungsregeln für die Unterposition 760429 hängen vom Handelsabkommen ab. Die Kommission veröffentlicht sie in Access2Markets.
Ursprungsregeln bei Access2MarketsInformationen
Wenn Sie "andere" importieren oder exportieren, ist es wichtig, den richtigen HS-Code oder TARIC-Code zu haben. Der HS-Code 7604290000 80 ist der Standardcode für dieses Produkt und stellt sicher, dass die richtigen Zölle und Abgaben bei einer Überquerung internationaler Grenzen angewendet werden.
Um sicherzustellen, dass Ihre Geschäftsabwicklung bei der Einfuhr oder Ausfuhr von "andere" reibungslos verläuft, sollten Sie folgende Punkte beachten:
- Informieren Sie sich über die spezifischen Einfuhr- und Ausfuhrbestimmungen in den beteiligten Ländern. Dazu gehören mögliche Beschränkungen, Steuern und Zölle, die auf "andere" anwendbar sind.
- Prüfen Sie, ob zusätzliche Lizenzen, Genehmigungen oder Zertifikate erforderlich sind, um "andere" in das Zielland zu importieren oder aus dem Herkunftsland zu exportieren.
- Achten Sie darauf, dass Ihre Handelspartner über gültige Identifikationsnummern verfügen, wie zum Beispiel die EORI-Nummer (Economic Operators Registration and Identification) in der EU, um den Handel effizienter zu gestalten und Verzögerungen zu minimieren.
- Stellen Sie sicher, dass alle handels- und zollrelevanten Dokumente (wie Handelsrechnungen, Packlisten, Ursprungszertifikate und Versicherungspolicen) korrekt ausgefüllt sind und den jeweiligen nationalen Vorschriften entsprechen.
- Behalten Sie die aktuellen Wechselkurse sowie die Kosten für Verpackung, Versand und Versicherung im Blick, um eine genaue Kalkulation der Handelskosten durchzuführen.
Zusammenfassend lautet der HS-Code oder TARIC-Code für "andere" 7604290000 80. Stellen Sie sicher, dass Sie diesen Code in all Ihren Handels- und Zolldokumenten korrekt verwenden, um eine reibungslose und problemlose Transaktion zu gewährleisten. Mit diesen Tipps sind Sie besser auf die Herausforderungen im internationalen Handel vorbereitet und können erfolgreich "andere" importieren und exportieren.
HS-Code Struktur
1. HS Kapitel
Es gibt 21 unterschiedliche Abschnitte, die in 96 Kapitel unterteilt sind. Ausnahmekapitel beinhalten Kapitel 77, welches für zukünftige Nutzung reserviert ist, Kapitel 98 und 99, die auf nationaler Ebene begrenzt sind, und Kapitel 99, welches ein spezifischer Code für temporäre Änderungen ist. Im obigen Beispiel wurde Kapitel 76 ausgewählt, für aluminium und waren daraus
2. HS Position
Die Überschrift bestimmt die spezifische Kategorie innerhalb eines bestimmten Kapitels. Im obigen Beispiel bezieht sich die 04 auf Stangen (Stäbe) und Profile, aus Aluminium.
3. HS Unterposition
Die letzten beiden Ziffern des internationalen Harmonisierten Codes sind spezifischer und definieren Unterkategorien von Produkten. Im obigen Beispiel bezieht sich die 29 auf andere.
HS-Code Baumstruktur
7600000000 80
HS Kapitel ALUMINIUM UND WAREN DARAUS
7604000000 80
Stangen (Stäbe) und Profile, aus Aluminium
7604100000 80
- aus nicht legiertem Aluminium
7604101000 80
- - Stangen (Stäbe)
7604101011 80
- - - nicht zusammengesetzt, mit einem Aluminiumgehalt von nicht mehr als 99,3 GHT
7604101090 80
- - - andere
7604109000 80
- - Profile
7604109011 10
- - - mit besonderer Fabrikationsnummer versehen, für bestimmte Luftfahrzeuge
7604109011 80
- - - - nicht zusammengesetzt, mit einem Aluminiumgehalt von nicht mehr als 99,3 GHT
7604109019 80
- - - - andere
7604109025 10
- - - konisch, zur Verstärkung des Seitenleitwerks, für bestimmte Luftfahrzeuge
7604109025 80
- - - - nicht zusammengesetzt, mit einem Aluminiumgehalt von nicht mehr als 99,3 GHT
7604109029 80
- - - - andere
7604109080 10
- - - andere
7604109080 80
- - - - nicht zusammengesetzt, mit einem Aluminiumgehalt von nicht mehr als 99,3 GHT
7604109089 80
- - - - andere
7604210000 10
- aus Aluminiumlegierungen
7604210000 80
- - Hohlprofile
7604290000 80
- - andere
7604291000 80
- - - Stangen (Stäbe)
7604299000 80
- - - Profile
7604299010 80
- - - - mit besonderer Fabrikationsnummer versehen, für bestimmte Luftfahrzeuge
7604299020 80
- - - - konisch, zur Verstärkung des Seitenleitwerks, für bestimmte Luftfahrzeuge
7604299090 80
- - - - andere