Import Handelsbeschränkungen für 3917220000 80
Ursprung Ursprungsland | Start | Zoll / Steuer | Recht
Rechtsgrundlage
Maßnahmetyp | |
---|---|---|---|---|
KP
|
North Korea (Democratic People’s Republic of Korea) KP | 01/07/2019
|
Cond: Y cert: Y-971 (29):; Y (09): | Regulation 1509/17
Importkontrolle
707
|
Erklärung der Handelsbeschränkungen
Erga Omnes bedeutet "für alle".
Drittländer sind Länder, die nicht der EU angehören.
GSP bedeutet "Generalised System of Preferences".
GSP Plus bedeutet "Generalised System of Preferences Plus".
European Economic Area (EEA) bedeutet alle EU-Mitgliedstaaten und Island, Liechtenstein und Norwegen.
OCTs steht für "Overseas Countries and Territories". Es sind Länder und Gebiete, die nicht der EU angehören. Mehr Informationen
CARIFORUM ist eine regionale Wirtschaftsintegrationsorganisation, die 15 Mitgliedstaaten der Karibischen Gemeinschaft (CARICOM) und die Dominikanische Republik umfasst.
SADC EPA steht für "Southern African Development Community - Economic Partnership Agreement".
Zoll bedeutet "Zollabgaben".
Informationen
Wenn Sie "Of polymers of propylene" importieren oder exportieren, ist es wichtig, den richtigen HS-Code oder TARIC-Code zu haben. Der HS-Code 3917220000 80 ist der Standardcode für dieses Produkt und stellt sicher, dass die richtigen Zölle und Abgaben bei einer Überquerung internationaler Grenzen angewendet werden.
Um sicherzustellen, dass Ihre Geschäftsabwicklung bei der Einfuhr oder Ausfuhr von "Of polymers of propylene" reibungslos verläuft, sollten Sie folgende Punkte beachten:
- Informieren Sie sich über die spezifischen Einfuhr- und Ausfuhrbestimmungen in den beteiligten Ländern. Dazu gehören mögliche Beschränkungen, Steuern und Zölle, die auf "Of polymers of propylene" anwendbar sind.
- Prüfen Sie, ob zusätzliche Lizenzen, Genehmigungen oder Zertifikate erforderlich sind, um "Of polymers of propylene" in das Zielland zu importieren oder aus dem Herkunftsland zu exportieren.
- Achten Sie darauf, dass Ihre Handelspartner über gültige Identifikationsnummern verfügen, wie zum Beispiel die EORI-Nummer (Economic Operators Registration and Identification) in der EU, um den Handel effizienter zu gestalten und Verzögerungen zu minimieren.
- Stellen Sie sicher, dass alle handels- und zollrelevanten Dokumente (wie Handelsrechnungen, Packlisten, Ursprungszertifikate und Versicherungspolicen) korrekt ausgefüllt sind und den jeweiligen nationalen Vorschriften entsprechen.
- Behalten Sie die aktuellen Wechselkurse sowie die Kosten für Verpackung, Versand und Versicherung im Blick, um eine genaue Kalkulation der Handelskosten durchzuführen.
Zusammenfassend lautet der HS-Code oder TARIC-Code für "Of polymers of propylene" 3917220000 80. Stellen Sie sicher, dass Sie diesen Code in all Ihren Handels- und Zolldokumenten korrekt verwenden, um eine reibungslose und problemlose Transaktion zu gewährleisten. Mit diesen Tipps sind Sie besser auf die Herausforderungen im internationalen Handel vorbereitet und können erfolgreich "Of polymers of propylene" importieren und exportieren.
HS-Code Struktur
1. HS Kapitel
Es gibt 21 unterschiedliche Abschnitte, die in 96 Kapitel unterteilt sind. Ausnahmekapitel beinhalten Kapitel 77, welches für zukünftige Nutzung reserviert ist, Kapitel 98 und 99, die auf nationaler Ebene begrenzt sind, und Kapitel 99, welches ein spezifischer Code für temporäre Änderungen ist. Im obigen Beispiel wurde Kapitel 39 ausgewählt, für plastics and articles thereof
2. HS Position
Die Überschrift bestimmt die spezifische Kategorie innerhalb eines bestimmten Kapitels. Im obigen Beispiel bezieht sich die 17 auf Tubes, pipes and hoses, and fittings therefor (for example, joints, elbows, flanges), of plastics.
3. HS Unterposition
Die letzten beiden Ziffern des internationalen Harmonisierten Codes sind spezifischer und definieren Unterkategorien von Produkten. Im obigen Beispiel bezieht sich die 22 auf Of polymers of propylene.
HS-Code Baumstruktur
3900000000 80
HS Kapitel PLASTICS AND ARTICLES THEREOF
3917000000 80
Tubes, pipes and hoses, and fittings therefor (for example, joints, elbows, flanges), of plastics
3917100000 80
- Artificial guts (sausage casings) of hardened protein or of cellulosic materials
3917101000 80
- - Of hardened protein
3917109000 80
- - Of cellulosic materials
3917210000 10
- Tubes, pipes and hoses, rigid
3917210000 80
- - Of polymers of ethylene
3917211000 80
- - - Seamless and of a length exceeding the maximum cross-sectional dimension, whether or not surface-worked, but not otherwise worked
3917211010 80
- - - - For use in certain types of aircraft
3917211090 80
- - - - Other
3917219000 80
- - - Other
3917219010 80
- - - - With fittings attached, for use in civil aircraft
3917219020 80
- - - - For use in certain types of aircraft
3917219090 80
- - - - Other
3917220000 80
- - Of polymers of propylene
3917221000 80
- - - Seamless and of a length exceeding the maximum cross-sectional dimension, whether or not surface-worked, but not otherwise worked
3917221010 80
- - - - For use in certain types of aircraft
3917221090 80
- - - - Other
3917229000 80
- - - Other
3917229010 80
- - - - With fittings attached, for use in civil aircraft
3917229020 80
- - - - For use in certain types of aircraft
3917229090 80
- - - - Other
3917230000 80
- - Of polymers of vinyl chloride
3917231000 80
- - - Seamless and of a length exceeding the maximum cross-sectional dimension, whether or not surface-worked, but not otherwise worked
3917231010 80
- - - - For use in certain types of aircraft
3917231090 80
- - - - Other
3917239000 80
- - - Other
3917239010 80
- - - - With fittings attached, for use in civil aircraft
3917239020 80
- - - - For use in certain types of aircraft
3917239090 80
- - - - Other
3917290000 80
- - Of other plastics
3917290011 10
- - - Of addition polymerisation products
3917290011 80
- - - - For use in certain types of aircraft
3917290019 80
- - - - Other
3917290091 10
- - - Other
3917290091 80
- - - - With fittings attached, for use in civil aircraft
3917290099 80
- - - - Other
3917310000 10
- Other tubes, pipes and hoses
3917310000 80
- - Flexible tubes, pipes and hoses, having a minimum burst pressure of 27,6 MPa
3917310010 80
- - - With fittings attached, for use in civil aircraft
3917310020 80
- - - For use in certain types of aircraft
3917310030 80
- - - Tubings: -with an outer diameter of 0,33 mm or more but not more than 3,3 mm, -with an inner diameter of 0,01 mm or more but not more than 2,1 mm, -suitable for a maximum working pressure rate from 2,7 MPa up to 70 MPa, -suitable for all solutions used in chromatography, -whether or not with fused silica, -whether or not covered with PEEK, for use in chromatographic system
3917310090 80
- - - Other
3917320000 80
- - Other, not reinforced or otherwise combined with other materials, without fittings
3917320010 80
- - - For use in certain types of aircraft
3917320020 80
- - - Tubings: -with an outer diameter of 0,33 mm or more but not more than 3,3 mm, -with an inner diameter of 0,01 mm or more but not more than 2,1 mm, -suitable for a maximum working pressure rate from 2,7 MPa up to 70 MPa, -suitable for all solutions used in chromatography, -whether or not with fused silica, -whether or not covered with PEEK, for use in chromatographic system
3917320030 80
- - - Heat shrinkable tube: -containing by weight 80 % or more polymer, -with an insulation resistance of 90 MW or more, -with a dielectric strength of 35 kV / mm or more, -with a wall thickness of 0,04 mm or more, but not more than 0,9 mm, -with a lay-flat width of 18 mm or more, but not more than 156 mm, for use in the manufacture of aluminium electrolytic capacitors
3917320090 80
- - - Other
3917330000 80
- - Other, not reinforced or otherwise combined with other materials, with fittings
3917330010 80
- - - With fittings attached, for use in civil aircraft
3917330090 80
- - - Other
3917390000 80
- - Other
3917390010 80
- - - With fittings attached, for use in civil aircraft
3917390020 10
- - - Other
3917390020 80
- - - - Tubings: -with an outer diameter of 0,33 mm or more but not more than 3,3 mm, -with an inner diameter of 0,01 mm or more but not more than 2,1 mm, -suitable for a maximum working pressure rate from 2,7 MPa up to 70 MPa, -suitable for all solutions used in chromatography, -whether or not with fused silica, -whether or not covered with PEEK, for use in chromatographic system
3917390091 80
- - - - For use in certain types of aircraft
3917390099 80
- - - - Other
3917400000 80
- Fittings
3917400010 80
- - For use in civil aircraft
3917400020 10
- - Other
3917400020 80
- - - Plastic fittings (kit of nuts and ferrules or nuts) and connectors: -threaded, -supported with or without a stainless steel ring, -suitable for a maximum working pressure rate of 2,7 MPa or more but not more than 114 MPa, for tubings with: -outer diameter of 0,33 mm or more but not more than 3,3 mm, -suitable for a maximum working pressure rate of 2,7 MPa or more but not more than 114 MPa, -suitable for all solutions used in chromatography, for use in the production of chromatographic systems
3917400091 80
- - - Plastic connectors containing O-rings, a retainer clip and a release system for insertion into car fuel hoses
3917400099 80
- - - Other