Zolltarifnummer 3920999000 80 - Other

3920730000 80

- - Of cellulose acetate

3920731000 80

- - - Film in rolls or in strips, for cinematography or photography

3920738000 80

- - - Other

3920790000 80

- - Of other cellulose derivatives

3920791000 80

- - - Of vulcanised fibre

3920791010 80

- - - - Sheets of painted vulcanised fibre-board with a thickness of not more than 1,5 mm

3920791090 80

- - - - Other

3920799000 80

- - - Other

3920910000 10

- Of other plastics

3920910000 80

- - Of poly(vinyl butyral)

3920910010 80

- - - For use in certain types of aircraft

3920910052 10

- - - Other

3920910052 80

- - - - Poly(vinyl butyral) film: - containing by weight 26 % or more but not more than 30 % of triethyleneglycol bis(2-ethyl hexanoate) as a plasticiser, - with a thickness of 0,73 mm or more but not more than 1,50 mm

3920910091 80

- - - - Poly(vinyl butyral) film having a graduated coloured band

3920910093 80

- - - - Film of poly(ethylene terephthalate), whether or not metallised on one or both sides, or laminated film of poly(ethylene terephthalate) films, metallised on the external sides only, and having the following characteristics: - a visible light transmission of 50 % or more, - coated on one or both sides with a layer of poly(vinyl butyral) but not coated with an adhesive or any other material except poly(vinyl butyral), - a total thickness of not more than 0,2 mm without taking the presence of poly(vinyl butyral) into account and a thickness of poly(vinyl butyral) of more than 0,2 mm

3920910095 10

- - - - Co-extruded trilayer poly(vinyl butyral) film

3920910095 80

- - - - - Co-extruded trilayer poly(vinyl butyral) film with a graduated colour band containing by weight 29 % or more but not more than 31 % of 2,2'-ethylenedioxydiethyl bis(2-ethylhexanoate) as a plasticiser

3920910097 80

- - - - - Other

3920910099 80

- - - - Other

3920920000 80

- - Of polyamides

3920930000 80

- - Of amino-resins

3920940000 80

- - Of phenolic resins

3920990000 80

- - Of other plastics

3920992100 10

- - - Of condensation or rearrangement polymerisation products, whether or not chemically modified

3920992100 80

- - - - Polyimide foil and strip, uncoated, or coated or covered solely with plastic

3920992800 80

- - - - Other

3920992840 80

- - - - - Polymer film containing the following monomers: - poly (tetramethylene ether glycol), - bis (4-isocyanotocyclohexyl) methane, - 1,4-butanediol or 1,3-butanediol, - with a thickness of 0,25 mm or more but not more than 5,0 mm, - embossed with a regular pattern on one surface, - and covered with a release sheet

3920992845 80

- - - - - Transparent polyurethane film metallised on one side: - with a gloss of more than 90 degrees according to ASTM D2457 - covered on the metalized side with a heat bonding adhesive layer consisting of polyethylene/polypropylene copolymer - covered on the other side with a protective poly(ethylene terephthalate) film - with a total thickness of more than 204 µm but not more than 244 µm

3920992848 80

- - - - - Thermoplastic polyurethane foil in rolls, with: -a width of 900 mm or more but not more than 1016 mm, -a matt finish, -a thickness of 0,4 mm (± 8 %), -an elongation at break of 480 % or more (ASTM D412 (Die C)), -a tensil strength in machine direction of 470 (± 10) kg/cm² (ASTM D412 (Die C)), -a Shore A hardness of 90 (± 3) (ASTM D2240), -a tear strength of 100 (± 10) kg/cm² (ASTM D624 (Die C)), -a melting point of 165°C (± 10 °C)

3920992850 80

- - - - - Thermoplastic polyurethane film, of a thickness of 250 μm or more but not more than 350 μm, covered on one side with a removable protective film

3920992865 80

- - - - - Matt, thermoplastic polyurethane foil in rolls with: - a width of 1640 mm (± 10 mm), - a gloss of 3,3 degrees or more but not more than 3,8 (as determined by the method ASTM D2457), - a surface roughness of 1,9 Ra or more but not more than 2,8 Ra (as determined by the method ISO 4287), - a thickness of more than 365 µm but not more than 760 µm, - a hardness of 90 (± 4) (as determined by the method: Shore A (ASTM D2240)), - an elongation to break of 470 % (as determined by the method: EN ISO 527)

3920992870 80

- - - - - Sheets on rolls, consisting of epoxy resin, with conducting properties, containing: - microspheres with a coating of metal, whether or not alloyed with gold, - an adhesive layer, - with a protective layer of silicone or poly(ethylene terephthalate) on one side, - with a protective layer of poly(ethylene terephthalate) on the other side, and - with a width of 5 cm or more but not more than 100 cm - with a length of not more than 2 000 m

3920992890 80

- - - - - Other

3920995200 10

- - - Of addition polymerisation products

3920995200 80

- - - - Poly(vinyl fluoride) sheet; biaxially oriented poly(vinyl alcohol) film, containing by weight 97 % or more of poly(vinyl alcohol), uncoated, of a thickness not exceeding 1 mm

3920995300 80

- - - - Ion-exchange membranes of fluorinated plastic material, for use in chlor-alkali electrolytic cells

3920995900 80

- - - - Other

3920995910 80

- - - - - For use in certain types of aircraft

3920995925 10

- - - - - Other

3920995925 80

- - - - - - Poly(1-chlorotrifluoroethylene) film

3920995930 80

- - - - - - Poly(tetrafluoroethylene) film containing by weight 10 % or more of graphite

3920995955 80

- - - - - - Ion-exchange membranes of fluorinated plastic material

3920995965 80

- - - - - - Film of a vinyl alcohol copolymer, soluble in cold water, of a thickness of 34 µm or more but not more than 90 µm, a tensile strength at break of 20 MPa or more but not more than 55 MPa and an elongation at break of 250 % or more but not more than 900 %

3920995975 80

- - - - - - Film of fluorinated ethylene propylene resin (CAS RN 25067-11-2) with: - a thickness of 0,010 mm or more but not more than 0,80 mm, - a width of 1 219 mm or more but not more than 1 575 mm, and - a melting point of 252 °C (measured according ASTM D-3418)

3920995990 80

- - - - - - Other

3920102810 80

- - - - - For use in certain types of aircraft

3920000000 80

Other plates, sheets, film, foil and strip, of plastics, non-cellular and not reinforced, laminated, supported or similarly combined with other materials

3920100000 80

- Of polymers of ethylene

3920102300 10

- - Of a thickness not exceeding 0,125 mm

3920102300 20

- - - Of polyethylene having a specific gravity of

3920102300 30

- - - - Less than 0,94

3920102300 80

- - - - - Polyethylene film, of a thickness of 20 micrometres or more but not exceeding 40 micrometres, for the production of photoresist film used in the manufacture of semiconductors or printed circuits

3920102400 80

- - - - - Stretch film, not printed

3920102410 80

- - - - - - For use in certain types of aircraft

3920102490 80

- - - - - - Other

3920102500 80

- - - - - Other

3920102505 80

- - - - - - For use in certain types of aircraft

3920102530 10

- - - - - - Other

3920102530 80

- - - - - - - Mono-layered High-Density Polyethylene film: -containing by weight 99 % or more of polyethylene, -with a thickness of 12 μm or more but not more than 20 μm, -with a length of 4000 m or more but not more than 7000 m, -with a width of 600 mm or more but not more than 900 mm

3920102590 80

- - - - - - - Other

3920102800 80

- - - - 0,94 or more

3920102820 10

- - - - - Other

3920102820 80

- - - - - - A Separator film of polyethylene: -coated on one side with a layer of aluminium oxide, -containing by weight not more than 70 % of polyethylene, -containing by weight not more than 30 % of aluminum oxide, -with a total thickness of 5 µm or more but not more than 25 µm, for use in the manufacture of lithium-ion batteries

3920102891 80

- - - - - - Poly(ethylene) film printed with a graphic design, which is achieved by using four base colours in ink plus specialist colours, to achieve multiple colours in ink on one side of the film, and one colour on the opposite side, the graphic design also has the following characteristics: - is repetitive and equally spaced along the length of the film - is equally and visibly aligned when viewed from the back or front of the film

3920102899 80

- - - - - - Other

3920104000 80

- - - Other

3920104010 80

- - - - For use in certain types of aircraft

3920104040 10

- - - - Other

3920104040 80

- - - - - Tubular layered film predominately of polyethylene: - consisting of a tri-layer barrier with a core layer of ethylene vinyl alcohol covered on either side with a layer of polyamide, covered on either side with at least one layer of polyethylene, - having a total thickness of 55 µm or more, - having a diameter of 500 mm or more but not more than 600 mm

3920104099 80

- - - - - Other

3920108100 10

- - Of a thickness exceeding 0,125 mm

3920108100 80

- - - Synthetic paper pulp, in the form of moist sheets made from unconnected finely branched polyethylene fibrils, whether or not blended with cellulose fibres in a quantity not exceeding 15 %, containing poly(vinyl alcohol) dissolved in water as the moistening agent

3920108900 80

- - - Other

3920108910 80

- - - - For use in certain types of aircraft

3920108925 10

- - - - Other

3920108925 80

- - - - - Adhesive film consisting of a base of a copolymer of ethylene and vinyl acetate (EVA) of a thickness of 70 µm or more and an adhesive part of acrylic type of a thickness of 5 µm or more, for use in the grinding and/or dicing process of silicon discs

3920108940 80

- - - - - Composite sheet containing an acrylic coating and laminated to a high-density polyethylene layer, of a total thickness of 0.8 mm or more but not exceeding 1.2 mm

3920108945 80

- - - - - Octene and ethylene copolymer plastic film of a thickness of 0,45 mm or more but not more than 0,75 mm, for use in the manufacture of glass to glass photovoltaic solar panels

3920108955 80

- - - - - Ethylene vinyl acetate (EVA) film: - with a raised relief surface with embossed undulations, - not laminated, - not cross-linked, and - with a thickness of more than 0,3 mm

3920108990 80

- - - - - Other

3920200000 80

- Of polymers of propylene

3920202100 10

- - Of a thickness not exceeding 0,10 mm

3920202100 80

- - - Biaxially oriented

3920202110 80

- - - - For use in certain types of aircraft

3920202140 80

- - - - Sheets of biaxially - oriented polypropylene film: - with the thickness of not more than 0,1 mm, - printed on both sides with specialised coatings to allow banknote security printing

3920202150 80

- - - - Biaxialy oriented film of multiple layers of polypropylene, with a total thickness of not more than 14 micron

3920202190 80

- - - - Other

3920202900 80

- - - Other

3920202910 80

- - - - For use in certain types of aircraft

3920202960 10

- - - - Other

3920202960 80

- - - - - Mono-axial oriented film, of a total thickness of not more than 75µm, consisting of three or four layers, each layer containing a mixture of polypropylene and polyethylene, with a core layer whether or not containing titanium dioxide, having: - a tensile strength in the machine direction of 120 MPa or more but not more than 270 MPa and - a tensile strength in the transverse direction of 10 MPa or more but not more than 40 MPa as determined by test method ASTM D882/ISO 527-3

3920202970 80

- - - - - Mono-axial oriented film, consisting of three layers, each layer consisting of a mixture of polypropylene and a copolymer of ethylene and vinyl acetate, with a core layer whether or not containing titanium dioxide, having: - a thickness of 55 µm or more but not more than 97 µm, - a tensile modulus in the machine direction of 0,30 GPa or more but not more than 1,45 GPa, and - a tensile modulus in the transverse direction of 0,20 GPa or more but not more than 0,70 GPa

3920202994 80

- - - - - Mono-axial oriented, co-extruded film: -consisting of 3 to 5 layers, -each layer mainly consisting of polypropylene and/or polyethylene, -each layer containing not more than 10 % by weight of other polymers, -whether or not containing titanium dioxide in the core layer, -of an overall thickness of not more than 75 μm

3920202999 80

- - - - - Other

3920208000 80

- - Of a thickness exceeding 0,10 mm

3920208010 80

- - - For use in certain types of aircraft

3920208090 80

- - - Other

3920300000 80

- Of polymers of styrene

3920300010 80

- - Acrylonitrile-butadiene-styrene, for use in certain types of aircraft

3920300090 80

- - Other

3920430000 10

- Of polymers of vinyl chloride

3920430000 80

- - Containing by weight not less than 6 % of plasticisers

3920431000 80

- - - Of a thickness not exceeding 1 mm

3920431010 80

- - - - For use in certain types of aircraft

3920431092 10

- - - - Other

3920431092 80

- - - - - Sheeting of poly(vinyl chloride), stabilized against ultraviolet rays, without any holes, even microscopic, of a thickness of 60 µm or more but not more than 80 µm, containing 30 or more but not more than 40 parts of plasticizer to 100 parts of poly(vinyl chloride)

3920431094 80

- - - - - Film of a specular gloss of 70 or more, measured at an angle of 60 ° using a glossmeter (as determined by the ISO 2813:2000 method), consisting of one or two layers of poly(vinyl chloride) coated on both sides with a layer of plastic, of a thickness of 0,26 mm or more but not more than 1,0 mm, covered on the gloss surface with a protective film of polyethylene, in rolls of a width of 1 000 mm or more but not more than 1 450 mm, for use in the manufacture of goods of heading 9403

3920431095 80

- - - - - Reflecting laminated sheet, consisting of a film of poly(vinyl chloride) and a film of an other plastic totally embossed in a regular pyramidal pattern, covered on one side with a release sheet

3920431099 80

- - - - - Other

3920439000 80

- - - Of a thickness exceeding 1 mm

3920439010 80

- - - - For use in certain types of aircraft

3920439090 80

- - - - Other

3920490000 80

- - Other

3920491000 80

- - - Of a thickness not exceeding 1 mm

3920491010 80

- - - - For use in certain types of aircraft

3920491030 10

- - - - Other

3920491030 80

- - - - - Film of a (polyvinyl)chloride-copolymer - containing by weight 45 % or more of fillers - on a support

3920491093 80

- - - - - Film of a specular gloss of 70 or more, measured at an angle of 60 ° using a glossmeter (as determined by the ISO 2813:2000 method), consisting of one or two layers of poly(vinyl chloride) coated on both sides with a layer of plastic, of a thickness of 0,26 mm or more but not more than 1,0 mm, covered on the gloss surface with a protective film of polyethylene, in rolls of a width of 1 000 mm or more but not more than 1 450 mm, for use in the manufacture of goods of heading 9403

3920491099 80

- - - - - Other

3920499000 80

- - - Of a thickness exceeding 1 mm

3920499010 80

- - - - For use in certain types of aircraft

3920499090 80

- - - - Other

3920510000 10

- Of acrylic polymers

3920510000 80

- - Of poly(methyl methacrylate)

3920510020 80

- - - Plate of poly(methyl methacrylate) containing aluminium trihydroxide, of a thickness of 3,5 mm or more but not more than 19 mm

3920510030 80

- - - Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50μm or more but not exceeding 90μm

3920510040 80

- - - Sheets of polymethylmethacrylate conforming to standard EN 4366 (MIL-PRF-25690)

3920510050 80

- - - Sheets of polymethylmethacrylate conforming to standard — EN 4364 (MIL-P-5425E) and DTD5592A, or — EN 4365 (MIL-P-8184) and DTD5592A

3920510090 80

- - - Other

3920590000 80

- - Other

3920591000 80

- - - Copolymer of acrylic and methacrylic esters, in the form of film of a thickness not exceeding 150 micrometres

3920599000 80

- - - Other

3920610000 10

- Of polycarbonates, alkyd resins, polyallyl esters or other polyesters

3920610000 80

- - Of polycarbonates

3920610030 80

- - - Reflecting sheet: - of a polycarbonate or acrylic polymer film embossed on one side in a regular shaped pattern - covered on one or both sides with one or more layers of plastic or metallisation, and - whether or not covered on one side with a self-adhesive layer and a release sheet

3920610040 80

- - - Extruded thermoplastic foils or films of polycarbonate with: - matt surface texture on both sides - a thickness of more than 50 μm but not more than 200 μm, - a width of 800 mm or more, but not more than 1 500 mm, and - a length of 300 m or more, but not more 2500 m

3920610050 80

- - - Coextruded film of polycarbonate main layer and polymethyl methacrylate top layer with a: -total thickness of more than 230 μm but not more than 270 μm, -top layer thickness of more than 40 μm but not more than 55 μm, -defined surface roughness of the top layer of 0,5 μm or less (according to ISO 4287), -UV-stabilized top layer

3920610090 80

- - - Other

3920620000 80

- - Of poly(ethylene terephthalate)

3920621200 10

- - - Of a thickness not exceeding 0,35 mm

3920621200 80

- - - - Poly(ethylene terephthalate) film, of a thickness of 72 micrometres or more but not exceeding 79 micrometres, for the manufacture of flexible magnetic disks; poly(ethylene terephthalate) film, of a thickness of 100 micrometres or more but not exceeding 150 micrometres, for the manufacture of photopolymer printing plates

3920621900 80

- - - - Other

3920710000 80

- - Of regenerated cellulose

3920621905 80

- - - - - Poly(ethylene terephthalate) film in rolls: - with a thickness of 0,335 mm or more but not more than 0,365 mm, and - coated with a gold layer with a thickness of 0,03 μm or more but not more than 0,06 μm

3920621908 80

- - - - - Poly(ethylene terephthalate) film, not coated with an adhesive, of a thickness of not more than 25 µm, either: - only dyed in the mass, or - dyed in the mass and metallised on one side

3920621912 80

- - - - - Film of poly(ethylene terephthalate) only, of a total thickness of not more than 120 µm, consisting of one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material

3920621918 80

- - - - - Laminated film of poly(ethylene terephthalate) only, of a total thickness of not more than 120 µm, consisting of one layer which is metallised only and one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material

3920621920 80

- - - - - Reflecting polyester sheeting embossed in a pyramidal pattern, for the manufacture of safety stickers and badges, safety clothing and accessories thereof, or of school satchels, bags or similar containers

3920621928 80

- - - - - Non-transparent poly(ethylene terephthalate) film: -covered on one side with a layer of a fluoropolymer, -covered on the other side with an adhesive and a layer of polyvinylidene difluoride, -each outer layer with a thickness of 7 nm or more but not more than 80 nm, -with a tensile strength of 300 N/cm or more (ASTM D-882), -with a total thickness of 200 µm or more but not more than 350 µm, and -with a width of 600 mm or more but not more than 1 600 mm

3920621938 80

- - - - - Poly(ethylene terephthalate) film, of a thickness of not more than 12 µm, coated on one side with a layer of aluminium oxide of a thickness of not more than 35 nm

3920621948 80

- - - - - Sheets or rolls of poly(ethylene terephthalate): - coated on both sides with a layer of epoxy acrylic resin, - of a total thickness of 37 μm (± 3 μm)

3920621952 80

- - - - - Film of poly(ethylene terephthalate), poly(ethylene naphthalate) or similar polyester, coated on one side with metal and/or metal oxides, containing by weight less than 0,1 % of aluminium, of a thickness of not more than 300 µm and having a surface resistivity of not more than 10 000 ohms (per square) (as determined by the ASTM D 257 method)

3920621960 80

- - - - - Poly (ethylene terephtalate) film: - of a thickness of not more than 20 µm, - coated on at least one side with a gas barrier layer consisting of a polymeric matrix in which silica or aluminium oxide has been dispersed and of a thickness of not more than 2µm

3920621968 80

- - - - - Poly(ethylene terephthalate) film in rolls: -with a thickness of 50 μm or more but not more than 350 μm, and -covered with a layer of sputtered precious metal such as gold or palladium with a thickness of 0,02 μm or more but not more than 0,06 μm

3920621976 80

- - - - - Transparent poly(ethylene terephthalate) film: - coated on both sides with layers of organic substances on the basis of acryl of a thickness of 7 nm or more but not more than 80 nm, - with a surface tension of 36 Dyne/cm or more but not more than 39 Dyne/cm, - with a light transmission of more than 93 %, - with a haze value of not more than 1,3 %, - with a total thickness of 10 µm or more but not more than 350 µm, - with a width of 800 mm or more but not more than 1 600 mm

3920621999 80

- - - - - Other

3920629000 80

- - - Of a thickness exceeding 0,35 mm

3920629010 80

- - - - Poly(ethylene terephthalate) film in rolls: - with a thickness of 0,335 mm or more but not more than 0,365 mm, and - coated with a gold layer with a thickness of 0,03 μm or more but not more than 0,06 μm

3920629020 80

- - - - Poly(ethylene terephthalate) film in rolls: -with a thickness of 50 μm or more but not more than 350 μm, and -covered with a layer of sputtered precious metal such as gold or palladium with a thickness of 0,02 μm or more but not more than 0,06 μm

3920629090 80

- - - - Other

3920630000 80

- - Of unsaturated polyesters

3920690000 80

- - Of other polyesters

3920690020 80

- - - Film of poly(ethylene naphthalene-2,6-dicarboxylate)

3920690030 80

- - - Mono- or multilayer, transverse oriented, shrink film: -composed of more than 85 % by weight of polylactic acid, not more than 5 % by weight of inorganic or organic additives and not more than 10 % by weight of additives based on biodegradable polyesters, -with a thickness of 20 μm or more but not more than 100 μm, -with a length of 2 385 m or more but not more than 9 075 m, -biodegradable and compostable (as determined by the method EN 13432)

3920690050 80

- - - Monolayer, biaxially oriented film: - composed of more than 85 % by weight of poly(lactic acid) and not more than 10,50 % by weight of modified poly(lactic acid) based polymer, poly-glycol ester and talc, - having a thickness of 20 µm or more but not more than 120 µm - biodegradable and compostable (as determined by the method EN 13432)

3920690060 80

- - - Monolayer, transverse oriented, shrink film: - composed of more than 80 % by weight of poly(lactic acid) and not more than 15,75 % by weight of additives of modified poly(lactic acid), - having a thickness of 45 µm or more but not more than 50 µm, - biodegradable and compostable (as determined by the method EN 13432)

3920690070 80

- - - Mono- or multilayer, biaxially oriented film: -composed of more than 85 % by weight of polylactic acid, not more than 5 % by weight of inorganic or organic additives, and not more than 10 % by weight of additives based on biodegradable polyesters, -with a thickness of 9 μm or more but not more than 120 μm, -with a length of 1 395 m or more but not more than 21 560 m, -biodegradable and compostable (as determined by the method EN 13432)

3920690090 80

- - - Other

3920710000 10

- Of cellulose or its chemical derivatives