Numéro tarifaire 3921909000 80 - Other

3921000000 80

Other plates, sheets, film, foil and strip, of plastics

3921110000 10

- Cellular

3921110000 80

- - Of polymers of styrene

3921110010 80

- - - Acrylonitrile butadiene styrene, for use in certain types of aircraft

3921110090 80

- - - Other

3921120000 80

- - Of polymers of vinyl chloride

3921120020 80

- - - For use in certain types of aircraft

3921120090 80

- - - Other

3921130000 80

- - Of polyurethanes

3921131000 80

- - - Flexible

3921131010 80

- - - - Sheet of polyurethane foam, of a thickness of 3 mm (± 15 %) and of a specific gravity of 0,09435 or more but not more than 0,10092

3921131090 80

- - - - Other

3921139000 80

- - - Other

3921140000 80

- - Of regenerated cellulose

3921140020 80

- - - Cellular block of regenerated cellulose, impregnated with water containing magnesium chloride and quaternary ammonium compounds, measuring 100 cm (± 10 cm) × 100 cm (± 10 cm) × 40 cm (± 5 cm)

3921140080 80

- - - Other

3921190000 80

- - Of other plastics

3921190010 80

- - - For use in certain types of aircraft

3921190030 10

- - - Other

3921190030 80

- - - - Blocks with cellular structure, containing by weight: - polyamide-6 or poly(epoxy anhydride) - 7 % or more but not more than 9 % of polytetrafluorethylene if present - 10 % or more but not more than 25 % of inorganic fillers

3921190040 80

- - - - Transparent, microporous, acrylic acid grafted polyethylene film, in the form of rolls, with: - a width of 98 mm or more but not more than170 mm, - a thickness of 15 µm or more but not more than 36 µm, of a kind used for the manufacture of alkaline battery separators

3921190045 80

- - - - Microporous monolayer film of polypropylene or a microporous trilayer film of polypropylene, polyethylene and polypropylene, each film with: -zero transversal production direction (TD) shrinkage, -a total thickness of 8 μm or more, but not more than 50 μm, -a width of 15 mm or more, but not more than 900 mm, -a length of more than 200 m, but not more than 8 000 m, -an average pore size between 0,02 μm and 0,1 μm -laminated or not with a Polypropylene non-woven mat of 50 to 200 µm thickness -coated or not with surfactant -coated or not on 1 or 2 sides with a ceramic layer of min 1 µm thickness or more, but not more than 5 µm -coated or not on 1 or 2 sides with a sticky binder, PVdF type or similar of min 0,5 µm thickness or more, but not more than 5 µm

3921190050 80

- - - - Porous membrane of polytetrafluorethylene (PTFE) laminated to a polyester spunbonded non-woven cloth with - a total thickness of more than 0,05 mm but not more than 0,20 mm, - a water entry pressure between 5 and 200 kPa according to ISO 811, and - an air permeability of 0,08 cm$3/cm$2/s or more according to ISO 5636-5

3921190060 80

- - - - Multi-porous multilayer separator foil with: - one microporous polyethylene layer between two microporous polypropylene layers and whether or not containing a coating of aluminium oxide on both sides, - a width of 65 mm or more but not more than 170 mm, - a total thickness of 0,01 mm or more but not more than 0,03 mm, - a porosity of 0,25 or more but not more than 0,65

3921190093 80

- - - - Strip of microporous polytetrafluoroethylene on a support of a non-woven, for use in the manufacture of filters for kidney dialysis equipment

3921190095 80

- - - - Film of polyethersulfone, of a thickness of not more than 200 µm

3921190099 80

- - - - Other

3921900000 80

- Other

3921901000 10

- - Of condensation or rearrangement polymerisation products, whether or not chemically modified

3921901000 80

- - - Of polyesters

3921901005 80

- - - - Corrugated sheet and plates

3921901010 80

- - - - Composite plate of poly(ethylene terephthalate) or of poly(butylene terephthalate), reinforced with glass fibres

3921901020 80

- - - - Poly(ethylene terephthalate) film, laminated on one side or on both sides with a layer of unidirectional nonwoven poly(ethylene terephthalate) and impregnated with polyurethane or epoxide resin

3921901030 80

- - - - Multilayer film consisting of: - a poly(ethylene terephthalate) film with a thickness of more than 100 µm but not more than 150 µm, - a primer of phenolic material with a thickness of more than 8 µm but not more than 15 µm, - an adhesive layer of a synthetic rubber with a thickness of more than 20 µm but not more than 30 µm, - and a transparent poly(ethylene terephthalate) liner with a thickness of more than 35 µm but not more than 40 µm

3921901090 80

- - - - Other

3921903000 80

- - - Of phenolic resins

3921904100 10

- - - Of amino-resins

3921904100 20

- - - - Laminated

3921904100 80

- - - - - High-pressure laminates with a decorative surface on one or both sides

3921904300 80

- - - - - Other

3921904900 80

- - - - Other

3921905500 80

- - - Other

3921905525 80

- - - - Prepreg sheets or rolls containing polyimide resin

3921905535 80

- - - - Glass fibre impregnated with epoxy resin for use in the manufacture of smart cards

3921905540 80

- - - - Three layered fabric sheet, in rolls, - comprising a core layer of 100 % Nylon Taffeta or Nylon/Polyester blended Taffeta, - coated on both sides with polyamide , - of a total thickness not more than 135 μm, - of a total weight not more than 80 g/m$2

3921905560 80

- - - - Membrane composed of a polyamide layer and a polysulfone layer on a cellulose support layer with: -a total thickness of 0,25 mm or more but not more than 0,40 mm, -a total weight of 109 g/m² or more but not more than 114 g/m²

3921905590 80

- - - - Other

3921906000 80

- - Of addition polymerisation products

3921906010 80

- - - For use in certain types of aircraft

3921906035 10

- - - Other

3921906035 80

- - - - Ion-exchange membranes based on a fabric coated on both sides with fluorinated plastic material, for use in chlor-alkali electrolytic cells

3921906099 80

- - - - Other