Import Handelsbeschränkungen für 8413600000 80
Ursprung Ursprungsland | Start | Zoll / Steuer | Recht
Rechtsgrundlage
Maßnahmetyp |
---|
Erklärung der Handelsbeschränkungen
Erga Omnes bedeutet "für alle".
Drittländer sind Länder, die nicht der EU angehören.
GSP bedeutet "Generalised System of Preferences".
GSP Plus bedeutet "Generalised System of Preferences Plus".
European Economic Area (EEA) bedeutet alle EU-Mitgliedstaaten und Island, Liechtenstein und Norwegen.
OCTs steht für "Overseas Countries and Territories". Es sind Länder und Gebiete, die nicht der EU angehören. Mehr Informationen
CARIFORUM ist eine regionale Wirtschaftsintegrationsorganisation, die 15 Mitgliedstaaten der Karibischen Gemeinschaft (CARICOM) und die Dominikanische Republik umfasst.
SADC EPA steht für "Southern African Development Community - Economic Partnership Agreement".
Zoll bedeutet "Zollabgaben".
Informationen
Wenn Sie "Other rotary positive displacement pumps" importieren oder exportieren, ist es wichtig, den richtigen HS-Code oder TARIC-Code zu haben. Der HS-Code 8413600000 80 ist der Standardcode für dieses Produkt und stellt sicher, dass die richtigen Zölle und Abgaben bei einer Überquerung internationaler Grenzen angewendet werden.
Um sicherzustellen, dass Ihre Geschäftsabwicklung bei der Einfuhr oder Ausfuhr von "Other rotary positive displacement pumps" reibungslos verläuft, sollten Sie folgende Punkte beachten:
- Informieren Sie sich über die spezifischen Einfuhr- und Ausfuhrbestimmungen in den beteiligten Ländern. Dazu gehören mögliche Beschränkungen, Steuern und Zölle, die auf "Other rotary positive displacement pumps" anwendbar sind.
- Prüfen Sie, ob zusätzliche Lizenzen, Genehmigungen oder Zertifikate erforderlich sind, um "Other rotary positive displacement pumps" in das Zielland zu importieren oder aus dem Herkunftsland zu exportieren.
- Achten Sie darauf, dass Ihre Handelspartner über gültige Identifikationsnummern verfügen, wie zum Beispiel die EORI-Nummer (Economic Operators Registration and Identification) in der EU, um den Handel effizienter zu gestalten und Verzögerungen zu minimieren.
- Stellen Sie sicher, dass alle handels- und zollrelevanten Dokumente (wie Handelsrechnungen, Packlisten, Ursprungszertifikate und Versicherungspolicen) korrekt ausgefüllt sind und den jeweiligen nationalen Vorschriften entsprechen.
- Behalten Sie die aktuellen Wechselkurse sowie die Kosten für Verpackung, Versand und Versicherung im Blick, um eine genaue Kalkulation der Handelskosten durchzuführen.
Zusammenfassend lautet der HS-Code oder TARIC-Code für "Other rotary positive displacement pumps" 8413600000 80. Stellen Sie sicher, dass Sie diesen Code in all Ihren Handels- und Zolldokumenten korrekt verwenden, um eine reibungslose und problemlose Transaktion zu gewährleisten. Mit diesen Tipps sind Sie besser auf die Herausforderungen im internationalen Handel vorbereitet und können erfolgreich "Other rotary positive displacement pumps" importieren und exportieren.
HS-Code Struktur
1. HS Kapitel
Es gibt 21 unterschiedliche Abschnitte, die in 96 Kapitel unterteilt sind. Ausnahmekapitel beinhalten Kapitel 77, welches für zukünftige Nutzung reserviert ist, Kapitel 98 und 99, die auf nationaler Ebene begrenzt sind, und Kapitel 99, welches ein spezifischer Code für temporäre Änderungen ist. Im obigen Beispiel wurde Kapitel 84 ausgewählt, für nuclear reactors, boilers, machinery and mechanical appliances; parts thereof
2. HS Position
Die Überschrift bestimmt die spezifische Kategorie innerhalb eines bestimmten Kapitels. Im obigen Beispiel bezieht sich die 13 auf Pumps for liquids, whether or not fitted with a measuring device; liquid elevators.
3. HS Unterposition
Die letzten beiden Ziffern des internationalen Harmonisierten Codes sind spezifischer und definieren Unterkategorien von Produkten. Im obigen Beispiel bezieht sich die 60 auf Other rotary positive displacement pumps.
HS-Code Baumstruktur
8400000000 80
HS Kapitel NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF
8413000000 80
Pumps for liquids, whether or not fitted with a measuring device; liquid elevators
8413110000 10
- Pumps fitted or designed to be fitted with a measuring device
8413110000 80
- - Pumps for dispensing fuel or lubricants, of the type used in filling stations or in garages
8413190000 80
- - Other
8413190010 80
- - - For use in civil aircraft
8413190090 80
- - - Other
8413200000 80
- Handpumps, other than those of subheading 8413 11 or 8413 19
8413200010 80
- - For use in civil aircraft
8413200090 80
- - Other
8413300000 80
- Fuel, lubricating or cooling medium pumps for internal combustion piston engines
8413302000 80
- - Injection pumps
8413302010 80
- - - For use in civil aircraft
8413302030 80
- - - Single-cylinder radial-piston high pressure pump for gasoline direct injection with: - an operating pressure of 200 bar or more, but not more than 350 bar, - a flow control, and - a pressure relief valve, for use in the manufacture of engines of motor vehicles
8413302040 80
- - - High-pressure plunger pump for direct diesel injection, with: -an operating pressure of not more than 275 MPa, -a camshaft, -a fluid discharging of 15 cm³ per minute or more, but not more than 1 800 cm³ per minute, -an electric pressure regulating valve
8413302050 80
- - - High-pressure plunger pump for direct diesel injection: -with an operating pressure of not more than 275 MPa, -designed to contact the crankshaft, -with an electromagnetic valve
8413302060 80
- - - High-pressure plunger pump for direct petrol injection: -with an operating pressure of not more than 90 MPa, -designed to contact the crankshaft, -with an electromagnetic valve
8413302090 80
- - - Other
8413308000 80
- - Other
8413308010 80
- - - For use in civil aircraft
8413308020 80
- - - Electric water pump ensuring the functionality of the water circuit also when the motor is temporarily switched off, for operating DC voltage of 9 V or more but not more than 16 V, with: -capacity - pressure 0,075 MPa at 3 800 rpm, -discharge of 12 l/min, -whether or not with connecting cable with connector, and -mounting bracket, for use in the manufacture of goods of Chapter 87
8413308090 80
- - - Other
8413400000 80
- Concrete pumps
8413500000 80
- Other reciprocating positive displacement pumps
8413502000 80
- - Hydraulic units
8413502010 80
- - - For use in civil aircraft
8413502090 80
- - - Other
8413504000 80
- - Dosing and proportioning pumps
8413504010 80
- - - For use in civil aircraft
8413504090 80
- - - Other
8413506100 10
- - Other
8413506100 20
- - - Piston pumps
8413506100 80
- - - - Hydraulic fluid power
8413506110 80
- - - - - For use in civil aircraft
8413506190 80
- - - - - Other
8413506900 80
- - - - Other
8413506910 80
- - - - - For use in civil aircraft
8413506990 80
- - - - - Other
8413508000 80
- - - Other
8413508010 80
- - - - For use in civil aircraft
8413508090 80
- - - - Other
8413600000 80
- Other rotary positive displacement pumps
8413602000 80
- - Hydraulic units
8413602010 80
- - - For use in civil aircraft
8413602090 80
- - - Other
8413603100 10
- - Other
8413603100 20
- - - Gear pumps
8413810000 80
- - Pumps
8413603100 80
- - - - Hydraulic fluid power
8413603110 80
- - - - - For use in civil aircraft
8413603190 80
- - - - - Other
8413603900 80
- - - - Other
8413603910 80
- - - - - For use in civil aircraft
8413603990 80
- - - - - Other
8413606100 10
- - - Vane pumps
8413606100 80
- - - - Hydraulic fluid power
8413606110 80
- - - - - For use in civil aircraft
8413606190 80
- - - - - Other
8413606900 80
- - - - Other
8413606910 80
- - - - - For use in civil aircraft
8413606990 80
- - - - - Other
8413607000 80
- - - Screw pumps
8413607010 80
- - - - For use in civil aircraft
8413607090 80
- - - - Other
8413608000 80
- - - Other
8413608010 80
- - - - For use in civil aircraft
8413608090 80
- - - - Other
8413700000 80
- Other centrifugal pumps
8413702100 10
- - Submersible pumps
8413702100 80
- - - Single-stage
8413702900 80
- - - Multi-stage
8413703000 80
- - Glandless impeller pumps for heating systems and warm water supply
8413703500 10
- - Other, with a discharge outlet diameter
8413703500 80
- - - Not exceeding 15 mm
8413703510 80
- - - - For use in civil aircraft
8413703589 80
- - - - Other
8413704500 10
- - - Exceeding 15 mm
8413704500 80
- - - - Channel impeller pumps and side channel pumps
8413704510 80
- - - - - For use in civil aircraft
8413704590 80
- - - - - Other
8413705100 10
- - - - Radial flow pumps
8413705100 20
- - - - - Single-stage
8413705100 30
- - - - - - With single entry impeller
8413705100 80
- - - - - - - Monobloc
8413705110 80
- - - - - - - - For use in civil aircraft
8413705120 80
- - - - - - - - Electric brushless direct current motor with single-stage, radial flow pump centrifugal single entry impeller mounted on motor's shaft and volute with integrated heater of nominal power of 1800 W and soldered safety devices, monobloc with the motor, with: -a discharge outlet diameter of 20 mm or more, -9 slots stator, -6 pole rotor, -rated power of 95 W, -volute with straight outlet, -rotor chamber without sand filter
8413705130 80
- - - - - - - - Electric brushless direct current motor with single-stage, radial flow pump centrifugal single entry impeller mounted on motor's shaft and volute with integrated heater of nominal power of 1800 W and soldered safety devices, monobloc with the motor, with: -a discharge outlet diameter of 20 mm or more, -9 slots stator, -6 pole rotor, -rated power of 95 W, -volute with clamped rubber hose outlet, -rotor chamber without sand filter
8413705140 80
- - - - - - - - Electric brushless direct current motor with single-stage, radial flow pump centrifugal single entry impeller mounted on motor's shaft, monobloc with the motor, volute with integrated heater, with: -a discharge outlet diameter of 20 mm or more, -9 slots square or chain pole stator, -6 pole rotor, -ferritic or rare earth magnets, -rated power of 95 W or 80 W, -heater of nominal power of 1800 W and soldered or laser welded safety, devices, -volute with or without clamped rubber outlet, -rotor chamber with ultrasonic welded sand filter
8413705190 80
- - - - - - - - Other
8413705900 80
- - - - - - - Other
8413705910 80
- - - - - - - - For use in civil aircraft
8413705990 80
- - - - - - - - Other
8413706500 80
- - - - - - With more than one entry impeller
8413706510 80
- - - - - - - For use in civil aircraft
8413706590 80
- - - - - - - Other
8413707500 80
- - - - - Multi-stage
8413707510 80
- - - - - - For use in civil aircraft
8413707590 80
- - - - - - Other
8413708100 10
- - - - Other centrifugal pumps
8413708100 80
- - - - - Single-stage
8413708110 80
- - - - - - For use in civil aircraft
8413708190 80
- - - - - - Other
8413708900 80
- - - - - Multi-stage
8413708910 80
- - - - - - For use in civil aircraft
8413708990 80
- - - - - - Other
8413810000 10
- Other pumps; liquid elevators
8413810010 80
- - - For use in civil aircraft
8413810090 80
- - - Other
8413820000 80
- - Liquid elevators
8413910000 10
- Parts
8413910000 80
- - Of pumps
8413910010 80
- - - For use in civil aircraft
8413910030 80
- - - Fuel pump cover: - consisting of aluminum alloys, - with a diameter of 38 mm or 50 mm, - with two concentric, annular grooves formed on its surface, - anodized, of a kind used in motor vehicles with petrol engines
8413910050 80
- - - Pump head for two cylinder high pressure pump made of forged steel, with: - milled threaded fittings with a diameter of 10 mm or more but not more than 36,8 mm, and - drilled fuel channels with a diameter of 3,5 mm or more but not more than 10 mm of a kind used in diesel injection systems
8413910090 80
- - - Other
8413920000 80
- - Of liquid elevators