Restrictions commerciales pour l'importation de marchandises pour 8481805100 10
| Origine Pays d'origine | Début | Droit / Impôt | Légal
Base légale
Type de mesure | |
|---|---|---|---|---|
1011
|
ERGA OMNES 1011 | 01/07/2016
|
0.000 % | Regulation 2658/87
Suspension - marchandises pour certaines catégories de navires, bateaux et autres navires et pour les plates-formes de forage ou de production
117
|
IR
|
Iran, Islamic Republic of IR | 03/04/2017
|
Cond: Y cert: Y-949 (29):; Y cert: C-067 (29):; Y (09): | Regulation 0267/12
Contrôle à l'importation
714
|
1011
|
ERGA OMNES 1011 | 03/04/2017
|
Cond: Y cert: Y-949 (29):; Y cert: C-067 (29):; Y cert: Y-069 (29):; Y (09): | Regulation 0267/12
Contrôle à l'importation
714
|
KP
|
North Korea (Democratic People’s Republic of Korea) KP | 01/09/2017
|
Cond: Y cert: Y-920 (29):; Y (09): | Regulation 1509/17
Contrôle à l'importation des biens et technologies restreints
711
|
KP
|
North Korea (Democratic People’s Republic of Korea) KP | 01/07/2019
|
Cond: Y cert: Y-971 (29):; Y (09): | Regulation 1509/17
Contrôle à l'importation
707
|
Explication des restrictions commerciales
Erga Omnes signifie "pour tous".
Les pays tiers sont des pays qui n'appartiennent pas à l'UE.
Le SPG signifie 'Système de préférences généralisées'.
Le SPG+ signifie 'Système de préférences généralisées Plus'.
European Economic Area (EEA) signifie tous les États membres de l'UE et l'Islande, le Liechtenstein et la Norvège.
Les PTOM sont des "Pays et territoires d'outre-mer". Ils ne sont pas membres de l'UE. Plus d'informations
'CARIFORUM est une organisation régionale d'intégration économique comprenant 15 États membres de la Communauté des Caraïbes (CARICOM) et la République dominicaine.'
'L'APE SADC signifie "Southern African Development Community - Economic Partnership Agreement" (Accord de partenariat économique).'
Droit signifie "droit de douane".
Informations
Lorsque vous importez ou exportez "Other", il est important d'avoir le bon code SH ou code TARIC. Le code HS 8481805100 10 est le code standard pour ce produit et garantit l'application des droits et taxes appropriés lorsqu'il franchit les frontières internationales.
Pour assurer un déroulement fluide de vos activités d'importation ou d'exportation de "Other", veuillez noter les points suivants :
- Informez-vous sur les régulations spécifiques à l'importation et à l'exportation dans les pays concernés. Cela comprend les restrictions, taxes et droits éventuels applicables sur "Other".
- Vérifiez si des licences, autorisations ou certificats supplémentaires sont nécessaires pour importer "Other" dans le pays de destination ou l'exporter depuis le pays d'origine.
- Assurez-vous que vos partenaires commerciaux disposent de numéros d'identification valides, tels que le numéro EORI (Economic Operators Registration and Identification) au sein de l'UE, afin de fluidifier les échanges et minimiser les retards.
- Vérifiez que tous les documents relatifs au commerce et aux douanes (facture commerciale, liste de colisage, certificats d'origine et polices d'assurance) sont correctement remplis et conformes aux régulations nationales respectives.
- Suivez les taux de change actuels ainsi que les coûts d'emballage, de transport et d'assurance afin de calculer avec précision le coût commercial.
En résumé, le code HS-Code ou le code TARIC pour "Other" est 8481805100 10. Assurez-vous d'utiliser correctement ce code dans tous vos documents commerciaux et douaniers pour garantir des transactions fluides et sans problème. Avec ces conseils, vous serez mieux préparé pour relever les défis du commerce international et réussir à importer et exporter "Other".
Structure du HS-Code
1. Chapitre
Il y a 21 sections différentes qui sont divisées en 96 chapitres. Les chapitres d'exception comprennent le chapitre 77, qui est réservé à une utilisation future, les chapitres 98 et 99, qui sont limités au niveau national, et le chapitre 99, qui est un code spécifique pour les modifications temporaires. Dans l'exemple ci-dessus, le chapitre 84 a été sélectionné pour nuclear reactors, boilers, machinery and mechanical appliances; parts thereof
2. Titre
3. Sous-titre
Les deux derniers chiffres du code harmonisé international sont plus spécifiques et définissent des sous-catégories de produits. Dans l'exemple ci-dessus, la 80 se réfère à Other.
Arborescence HS-Code
8400000000 80
Chapitre NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF
8481309130 80
- - - - Mechanical check (non-return) valve for opening and closing of the flow of fuel: -with an operating pressure of not more than 250 MPa, -with a flow rate of 45 cm³/minute or more, but not more than 55 cm³/minute, -with 4 input holes, each of them with a diameter of 1,2 mm or more, but not more than 1,6 mm, -made of steel
8481309191 80
- - - - Steel check (non-return) valves with: - an opening pressure of not more than 800 kPa - an external diameter not more than 37 mm
8481309199 80
- - - - Other
8481309900 80
- - Other
8481309920 80
- - - For use in certain types of aircraft
8481309930 80
- - - Brake booster check valve assembly containing at least: -three vulcanized rubber hoses, -one membrane valve, -two metal clamps, -one metal holder, -whether or not connecting metal pipe, for use in the manufacture of motor vehicles
8481309950 80
- - - Mechanical check (non-return) valve for opening and closing of the flow of fuel: -with an operating pressure of not more than 250 MPa, -with a flow rate of 45 cm³/minute or more, but not more than 55 cm³/minute, -with 4 input holes, each of them with a diameter of 1,2 mm or more, but not more than 1,6 mm, -made of steel
8481309990 80
- - - Other
8481400000 80
- Safety or relief valves
8481401000 80
- - Of cast iron or of steel
8481401050 80
- - - For use in certain types of aircraft
8481401090 80
- - - Other
8481409000 80
- - Other
8481409010 80
- - - For use in certain types of aircraft
8481409090 80
- - - Other
8481800000 80
- Other appliances
8481801100 10
- - Taps, cocks and valves for sinks, washbasins, bidets, water cisterns, baths and similar fixtures
8481801100 80
- - - Mixing valves
8481801110 80
- - - - For use in certain types of aircraft
8481801190 80
- - - - Other
8481801900 80
- - - Other
8481801910 80
- - - - For use in certain types of aircraft
8481801990 80
- - - - Other
8481803100 10
- - Central heating radiator valves
8481803100 80
- - - Thermostatic valves
8481803900 80
- - - Other
8481804000 80
- - Valves for pneumatic tyres and inner tubes
8481804010 80
- - - For use in certain types of aircraft
8481804090 80
- - - Other
8481805100 10
- - Other
8481805100 20
- - - Process control valves
8481805100 80
- - - - Temperature regulators
8481805900 80
- - - - Other
8481805910 80
- - - - - Air control valve, consisting of a stepping motor and a valve pintle, for the regulation of idle air flow in fuel injection engines
8481805920 80
- - - - - Pressure regulating valve for incorporation into compressors of motor vehicle air condition units
8481805930 80
- - - - - Two-way flow control valve with housing, with: - at least 5, but not more than 16 outlet holes with at least 0,05 mm, but not more than 0,5 mm diameter, - at least 330 cm³/minute, but not more than 5 000 cm³/minute flow rate, - at least 19, but not more than 300 MPa operating pressure
8481805940 80
- - - - - Flow-control valve - made of steel, - with an outlet hole with a diameter of at least 0,05mm or more, but not more than 0,5 mm, - with an inlet hole with a diameter of at least 0,1 mm, but not more than 1,3 mm, - with chromium nitride coating, - with a surface roughness of Rp 0,4
8481805950 80
- - - - - Electromagnetic valve for quantity control with - a plunger, - a solenoid with a of coil resistance of at least 1,85 Ohm, but not more than 8,2 Ohm
8481805960 80
- - - - - Electromagnetic valve for quantity control - with a solenoid with a coil resistance of at least 0,19 Ohm, but not more than 0,66 Ohm, and with an inductance of not more than 1 mH
8481805970 80
- - - - - Flow-control valve -made of steel, -with an outlet hole with a diameter of at least 0,05 mm, but not more than 0,5 mm, -with an inlet hole with a diameter of at least 0,1 mm, but not more than 1,3 mm
8481805990 80
- - - - - Other
8481806100 10
- - - Other
8481806100 20
- - - - Gate valves
8481806100 80
- - - - - Of cast iron
8481806300 80
- - - - - Of steel
8481806350 80
- - - - - - For use in certain types of aircraft
8481806390 80
- - - - - - Other
8481806900 80
- - - - - Other
8481806950 80
- - - - - - For use in certain types of aircraft
8481806960 10
- - - - - - Other
8481806960 80
- - - - - - - Four-way reversing valve for refrigerants, consisting of: - a solenoid pilot valve - a brass valve body including valve slider and copper connections with a working pressure up to 4,5 MPa
8481806999 80
- - - - - - - Other
8481807100 10
- - - - Globe valves
8481807100 80
- - - - - Of cast iron
8481807300 80
- - - - - Of steel
8481807310 80
- - - - - - For use in certain types of aircraft
8481807320 80
- - - - - - Pressure- and flow-control valve controlled by external electromagnet: - made of steel and/or steel alloy(s), - without integrated circuit, - of not more than 1000 kPa operating pressure, - with a flow quantity of not more than 5 l/min, - without an electromagnet
8481807390 80
- - - - - - Other
8481807900 80
- - - - - Other
8481807910 80
- - - - - - For use in certain types of aircraft
8481807930 80
- - - - - - Service Valve which suits for R410A or R32 gas while connecting indoor and outdoor units with: -a withstanding pressure of the valve body of 6,3 MPa, -a leakage ratio of less than 1,6 g/a, -an impurity ratio of less than 1,2 mg/PCS, -an airtight pressure of the valve body of 4,2 MPa, for use in the manufacture of air conditioners
8481807990 80
- - - - - - Other
8481808100 80
- - - - Ball and plug valves
8481808130 80
- - - - - For use in certain types of aircraft
8481808190 80
- - - - - Other
8481808500 80
- - - - Butterfly valves
8481808530 80
- - - - - For use in certain types of aircraft
8481808590 80
- - - - - Other
8481808700 80
- - - - Diaphragm valves
8481808730 80
- - - - - For use in certain types of aircraft
8481808790 80
- - - - - Other
8481809900 80
- - - - Other
8481809930 80
- - - - - Service Valve which suits for R410A or R32 gas while connecting indoor and outdoor units with: -a withstanding pressure of the valve body of 6,3 MPa, -a leakage ratio of less than 1,6 g/a, -an impurity ratio of less than 1,2 mg/PCS, -an airtight pressure of the valve body of 4,2 MPa, for use in the manufacture of air conditioners
8481809940 80
- - - - - For use in certain types of aircraft
8481809970 80
- - - - - Pressure- and flow-control valve controlled by external electromagnet: - made of steel and/or steel alloy(s), - without integrated circuit, - of not more than 1000 kPa operating pressure, - with a flow quantity of not more than 5 l/min, - without an electromagnet
8481809990 80
- - - - - Other
8481900000 80
- Parts
8481900010 80
- - For use in certain types of aircraft
8481900040 80
- - Valve armature: - for the opening and closing of the flow of fuel, - consisting of a shaft and a blade, - with at least 3 but not more than 8 holes on the blade, - made of metal and/or metal alloy(s)
8481900050 80
- - Silicone or plastic keyboards, comprising: -parts of common metal, and -whether or not comprising parts of plastic, -epoxy resin reinforced with fiberglass or wood, -whether or not printed or surface-treated, -with or without electrical conductors -with or without a membrane bonded to the keyboard, -with or without mono or multilayer protective film
8481900060 80
- - Nozzle body for the regulation of angle and distribution of fuel injection: -of a cylindrical shape, -made of stainless steel, -with 4 or more, but not more than 16 holes, -with a flow rate of 100 cm³/minute or more, but not more than 500 cm³/minute
8481900070 80
- - Nozzle needle for opening and closing the flow of fuel in the engine, with: -2 holes, -4 grooves, -a diameter of 3 mm or more, but not more than 6 mm, -a length of 25 mm or more, but not more than 35 mm, -made of stainless steel with hard-chrome plating
8481900080 80
- - Flow-control valve -made of steel, -with an outlet hole with a diameter of at least 0,05 mm, but not more than 0,5 mm, -with an inlet hole with a diameter of at least 0,1 mm, but not more than 1,3 mm
8481900090 80
- - Other
8481000000 80
Taps, cocks, valves and similar appliances for pipes, boiler shells, tanks, vats or the like, including pressure-reducing valves and thermostatically controlled valves
8481100000 80
- Pressure-reducing valves
8481100500 80
- - Combined with filters or lubricators
8481100510 80
- - - For use in certain types of aircraft
8481100590 80
- - - Other
8481101900 10
- - Other
8481101900 80
- - - Of cast iron or of steel
8481101910 80
- - - - For use in certain types of aircraft
8481101930 80
- - - - Electromagnetic pressure reducing valve -with a plunger, -with an operating pressure of not more than 325 MPa, -with a plastic connector with 2 silver or tin, or silver-plated, or tin-plated, or silver and tin plated pins
8481101990 80
- - - - Other
8481109900 80
- - - Other
8481109910 80
- - - - For use in certain types of aircraft
8481109920 80
- - - - Electromagnetic pressure reducing valve - with a plunger, - with an operating pressure of not more than 325MPa, - with a plastic connector with 2 silver or tin, or silver-plated, or tin-plated, or silver and tin plated pins
8481109940 80
- - - - Pressure reducing valves in a brass case with: -a length of not more than 30 mm (± 1 mm), -a width of not more than 18 mm (± 1 mm), of a kind used for incorporation in fuel delivery modules of motor vehicles
8481109990 80
- - - - Other
8481200000 80
- Valves for oleohydraulic or pneumatic transmissions
8481201000 80
- - Valves for the control of oleohydraulic power transmission
8481201020 80
- - - For use in certain types of aircraft
8481201090 80
- - - Other
8481209000 80
- - Valves for the control of pneumatic power transmission
8481209020 80
- - - For use in certain types of aircraft
8481209090 80
- - - Other
8481300000 80
- Check (non-return) valves
8481309100 80
- - Of cast iron or of steel
8481309120 80
- - - For use in certain types of aircraft
8481309130 10
- - - Other