Zolltarifnummer 8708923500 10 - Other

8708000000 80

Parts and accessories of the motor vehicles of headings 8701 to 8705

8708100000 80

- Bumpers and parts thereof

8708101000 80

- - For the industrial assembly of: Vehicles of heading 8703; Vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm$3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm$3; Vehicles of heading 8705

8708101010 80

- - - Plastic cover for filling the space between the fog lights and the bumper whether or not with a chrome strip for use in the manufacture of goods of Chapter 87

8708101090 80

- - - Other

8708109000 80

- - Other

8708109010 80

- - - Plastic cover for filling the space between the fog lights and the bumper whether or not with a chrome strip for use in the manufacture of goods of Chapter 87

8708109090 80

- - - Other

8708210000 10

- Other parts and accessories of bodies (including cabs)

8708210000 80

- - Safety seat belts

8708805500 80

- - - Anti roll bars; other torsion bars

8708809100 10

- - - Other

8708809100 80

- - - - Of closed-die forged steel

8708211000 80

- - - For the industrial assembly of: Vehicles of heading 8703; Vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm$3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm$3; Vehicles of heading 8705

8708219000 80

- - - Other

8708220000 80

- - Front windscreens (windshields), rear windows and other windows specified in subheading note 1 to this chapter

8708221000 80

- - - For the industrial assembly of: Pedestrian-controlled tractors of subheading 8701 10; Vehicles of heading 8703; Vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm³ or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm³; Vehicles of heading 8705

8708229000 80

- - - Other

8708290000 80

- - Other

8708291000 80

- - - For the industrial assembly of: Pedestrian-controlled tractors of subheading 8701 10; Vehicles of heading 8703; Vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm$3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm$3; Vehicles of heading 8705

8708299000 80

- - - Other

8708300000 80

- Brakes and servo-brakes; parts thereof

8708301000 80

- - For the industrial assembly of: Pedestrian-controlled tractors of subheading 8701 10; Vehicles of heading 8703; Vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm$3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm$3; Vehicles of heading 8705

8708301020 80

- - - Motor powered brake actuation unit - with a rating of 13.5 V (±0.5V) and - a ball screw mechanism to control brake fluid pressure in the master cylinder for use in the manufacture of electric motor vehicles

8708301040 80

- - - Body of disc type brake in BIR (Ball in Ramp) or EPB (Electronic Parking Brake) or with hydraulic function only, containing functional and mounting openings and guide grooves, of a kind used in the manufacture of goods of Chapter 87

8708301060 80

- - - Non-asbestos organic brake pads with friction material mounted to the band steel back plate for use in the manufacture of goods of Chapter 87

8708301070 80

- - - Ductile cast iron brake caliper jaw, of a kind used in the manufacture of goods of Chapter 87

8708301090 80

- - - Other

8708309100 10

- - Other

8708309100 80

- - - For disc brakes

8708309120 80

- - - - Non-asbestos organic brake pads with friction material mounted to the band steel back plate for use in the manufacture of goods of Chapter 87

8708309130 80

- - - - Body of disc type brake in BIR (Ball in Ramp) or EPB (Electronic Parking Brake) or with hydraulic function only, containing functional and mounting openings and guide grooves, of a kind used in the manufacture of goods of Chapter 87

8708309140 80

- - - - Ductile cast iron brake caliper jaw, of a kind used in the manufacture of goods of Chapter 87

8708309160 80

- - - - Motor powered brake actuation unit - with a rating of 13.5 V (±0.5V) and - a ball screw mechanism to control brake fluid pressure in the master cylinder for use in the manufacture of electric motor vehicles

8708309190 80

- - - - Other

8708309900 80

- - - Other

8708309910 80

- - - - Motor powered brake actuation unit -with a rating of 13.5 V (±0.5V) and -a ball screw mechanism to control brake fluid pressure in the master cylinderfor use in the manufacture of electric motor vehicles

8708309990 80

- - - - Other

8708400000 80

- Gear boxes and parts thereof

8708402000 80

- - For the industrial assembly of: Pedestrian-controlled tractors of subheading 8701 10; Vehicles of heading 8703; Vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm$3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm$3; Vehicles of heading 8705

8708402020 80

- - - Automatic hydrodynamic gearbox - with a hydraulic torque converter, - without transfer box and cardan shaft, - whether or not with front differential, for use in the manufacture of motor vehicles of Chapter 87

8708402050 80

- - - Transmission assembly which houses 3 other shafts inside it and offers a rotating switch for shift position consisting: -cast aluminium body,-differential gear, -2 electrical motors and gears, with the dimensions of: -a width of 280 mm or more but not more than 470 mm, -a height of 350 mm or more but not more than 595 mm, -a length of 410 mm or more but not more than 690 mm, for use in the manufacture of motor vehicles of Chapter 87

8708402060 80

- - - Automatic transmission assembly with rotary gear shifter with: -aluminium casting housing,  -differential gear, -9 Speed automatic,  -electronic range select gear selection system, with dimensions of: -a width of 330 mm or more but not more than 420 mm, -a height of 380 mm or more but not more than 450 mm, -a length of 580 mm or more but not more than 690 mm, for use in the manufacture of the vehicles in heading 87

8708809900 80

- - - - Other

8708402070 80

- - - Manual gearbox in cast aluminium housing for transverse installation with: -a width of not more than 480 mm, -a height of not more than 400 mm, -a length of not more than 550 mm, -five or six gears, -a differential gear, -an engine torque of 400 Nm or less, for use in the manufacture of motor vehicles of Heading 8703

8708402080 80

- - - Transmission gearbox without torque converter, with: -dual clutch, -7 or more forward gears, -1 reverse gear, -a maximum torque of 390 Nm, -whether or not with electric motor integrated, -a height of 480 mm or more but not more than 600 mm, -a width of 350 mm or more but not more than 450 mm, and -a weight of 80kg or more but not more than 110 kg, for use in the manufacture of motor vehicles of Heading 8703

8708402090 80

- - - Other

8708405000 10

- - Other

8708405000 80

- - - Gear boxes

8708405010 80

- - - - Automatic hydrodynamic gearbox - with a hydraulic torque converter, - without transfer box and cardan shaft, - whether or not with front differential, for use in the manufacture of motor vehicles of Chapter 87

8708405040 80

- - - - Transmission assembly which houses 3 other shafts inside it and offers a rotating switch for shift position consisting: -cast aluminium body,-differential gear, -2 electrical motors and gears, with the dimensions of: -a width of 280 mm or more but not more than 470 mm, -a height of 350 mm or more but not more than 595 mm, -a length of 410 mm or more but not more than 690 mm, for use in the manufacture of motor vehicles of Chapter 87

8708405050 80

- - - - Automatic transmission assembly with rotary gear shifter with: -aluminium casting housing,  -differential gear, -9 Speed automatic,  -electronic range select gear selection system, with dimensions of: -a width of 330 mm or more but not more than 420 mm, -a height of 380 mm or more but not more than 450 mm, -a length of 580 mm or more but not more than 690 mm, for use in the manufacture of the vehicles in heading 87

8708405060 80

- - - - Manual gearbox in cast aluminium housing for transverse installation with: -a width of not more than 480 mm, -a height of not more than 400 mm, -a length of not more than 550 mm, -five or six gears, -a differential gear, -an engine torque of 400 Nm or less, for use in the manufacture of motor vehicles of Heading 8703

8708405070 80

- - - - Automatic transmission equipped with double clutch system with: -at least 8 gears, -an engine torque of 800 Nm or more, -an electronic differential, -a P-lock safety system, and -a TCU transmission control unit, for use in the manufacture of motor vehicles of heading 8703

8708405090 80

- - - - Other

8708409100 10

- - - Parts

8708409100 80

- - - - Of closed-die forged steel

8708409900 80

- - - - Other

8708500000 80

- Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof

8708502000 80

- - For the industrial assembly of: Vehicles of heading 8703; Vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm$3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm$3; Vehicles of heading 8705

8708502015 80

- - - Spherical outboard constant velocity joint ball bearing cage, part of the vehicle's drive system, made of material suitable to be carburized with a carbon content of 0,14 % or more but not more than 0,57 %, forged, turned, punched, milled and hardened

8708502020 80

- - - Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle - of a length of 1 m or more but not more than 2 m, - of a weight of 6 kg or more but not more than 9 kg

8708502025 80

- - - Ball-type outboard constant velocity joint housing for transmitting a torque from the engine and transmission to the wheels of motor vehicles, in a form of an outer race, with: -6 ball tracks or more but not more than 8, with -a thread, -an external involute spline with 21 or more but not more than 38 teeth, -for running with bearing balls made of steel with a carbon content of 0,48 % or more but not more than 0,57 %, -forged, turned, milled and hardened

8708502035 80

- - - Inboard constant velocity joint tripod housing, with: -an outer diameter of 67,0 mm or more but not more than 99,0 mm, -3 cold calibrated roller tracks with a diameter of 29,95 mm or more but not more than 49,2 mm, -an external spline with 21 teeth or more but not more than 41, -forged, turned, rolled and hardened

8708502045 80

- - - Outboard constant velocity joint inner race, part of the vehicle's drive system, with: -6 or more but not more than 8 ball tracks, suitable for bearing balls with a diameter of 12,0 mm or more but not more than 24,0 mm, -forged, turned, milled, broached and hardened

8708502050 80

- - - Double flange bearing of 3rd generation, for motor vehicles, - with double-row ball bearing, - whether or not with impulse (encoder) ring, - whether or not with antilock brake system (ABS) sensor, - whether or not with mounted screws, for use in the manufacture of goods of chapter 87

8708502055 80

- - - Inboard constant velocity joint tripod spider, part of the vehicle's drive system, with: -3 trunnions with a diameter of 17,128 mm or more but not more than 25,468 mm, -forged, turned, broached and hardened

8708502060 80

- - - Car transfer case with single input, dual output, to distribute torque between front and rear axles in an aluminium housing, with dimension of not more than 565 × 570 × 510 mm, comprising: - at least an actuator, - whether or not an interior distribution by chain

8708502065 80

- - - Intermediate steel shaft connecting the gearbox with semi-axle with: -a length of 300 mm or more but not more than 650 mm, -a spline end on both sides, -whether or not with a pressed bearing in the case, -whether or not with a holder for use in the manufacture of goods of Chapter 87

8708502070 80

- - - Housing of tripod type half shaft inboard joint for transmitting a torque from engine and transmission to wheels of motor vehicles with: -an outer diameter of 67,0 mm or more but not more than 84,5 mm, -3 cold calibrated roller tracks with a diameter of 29,90 mm or more but not more than 36,60 mm, - sealing diameter 34,0 mm or more but not more than 41,0 mm, without lead angle, -spline with 21 teeth or more but not more than 35, -bearing seat diameter of 25,0 mm or more but not more than 30,0 mm, with or without oil grooves

8708502075 80

- - - Outboard joint assembly for transmitting a torque from engine and transmission to wheels of motor vehicles, consisting of: -an inner race with 6 ball tracks for running with the bearing balls with a diameter 15,0 mm or more but not more than 20,0 mm, -an outer race with 6 ball tracks for running with 6 bearing balls, made of steel with carbon content of 0,45 % or more but not more than 0,58 %, with thread and with a spline with 26 teeth or more but not more than 38, -a spherical cage keeping bearing balls in the ball tracks of outer race and inner race in proper angular position, made of material suitable for carburizing with carbon content of 0,14 % or more but not more than 0,25 %, and -with a grease compartment, capable of working at constant speed at variable articulation angle not higher than 50 degrees

8708502090 80

- - - Other

8708503500 10

- - Other

8708503500 80

- - - Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles

8708505500 10

- - - Parts

8708505500 80

- - - - Of closed-die forged steel

8708505520 80

- - - - - Double flange bearing of 3rd generation, for motor vehicles, - with double-row ball bearing, - whether or not with impulse (encoder) ring, - whether or not with antilock brake system (ABS) sensor, - whether or not with mounted screws, for use in the manufacture of goods of chapter 87

8708505550 80

- - - - - Spherical outboard constant velocity joint ball bearing cage, part of the vehicle's drive system, made of material suitable to be carburized with a carbon content of 0,14 % or more but not more than 0,57 %, forged, turned, punched, milled and hardened

8708505590 80

- - - - - Other

8708509100 10

- - - - Other

8708509100 80

- - - - - For non-driving axles

8708509110 80

- - - - - - Double flange bearing of 3rd generation, for motor vehicles, - with double-row ball bearing, - whether or not with impulse (encoder) ring, - whether or not with antilock brake system (ABS) sensor, - whether or not with mounted screws, for use in the manufacture of goods of chapter 87

8708509190 80

- - - - - - Other

8708509900 80

- - - - - Other

8708509910 80

- - - - - - Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle - of a length of 1 m or more but not more than 2 m, - of a weight of 6 kg or more but not more than 9 kg

8708509915 80

- - - - - - Car transfer case with single input, dual output, to distribute torque between front and rear axles in an aluminium housing, with dimension of not more than 565 × 570 × 510 mm, comprising: - at least an actuator, - whether or not an interior distribution by chain

8708509920 80

- - - - - - Intermediate steel shaft connecting the gearbox with semi-axle with: -a length of 300 mm or more but not more than 650 mm, -a spline end on both sides, -whether or not with a pressed bearing in the case, -whether or not with a holder for use in the manufacture of goods of Chapter 87

8708509925 80

- - - - - - Housing of tripod type half shaft inboard joint for transmitting a torque from engine and transmission to wheels of motor vehicles with: -an outer diameter of 67,0 mm or more but not more than 84,5 mm, -3 cold calibrated roller tracks with a diameter of 29,90 mm or more but not more than 36,60 mm, - sealing diameter 34,0 mm or more but not more than 41,0 mm, without lead angle, -spline with 21 teeth or more but not more than 35, -bearing seat diameter of 25,0 mm or more but not more than 30,0 mm, with or without oil grooves

8708509935 80

- - - - - - Outboard joint assembly for transmitting a torque from engine and transmission to wheels of motor vehicles, consisting of: -an inner race with 6 ball tracks for running with the bearing balls with a diameter 15,0 mm or more but not more than 20,0 mm, -an outer race with 6 ball tracks for running with 6 bearing balls, made of steel with carbon content of 0,45 % or more but not more than 0,58 %, with thread and with a spline with 26 teeth or more but not more than 38, -a spherical cage keeping bearing balls in the ball tracks of outer race and inner race in proper angular position, made of material suitable for carburizing with carbon content of 0,14 % or more but not more than 0,25 %, and -with a grease compartment, capable of working at constant speed at variable articulation angle not higher than 50 degrees

8708509940 80

- - - - - - Double flange bearing of 3rd generation, for motor vehicles, - with double-row ball bearing, - whether or not with impulse (encoder) ring, - whether or not with antilock brake system (ABS) sensor, - whether or not with mounted screws, for use in the manufacture of goods of chapter 87

8708509945 80

- - - - - - Ball-type outboard constant velocity joint housing for transmitting a torque from the engine and transmission to the wheels of motor vehicles, in a form of an outer race, with: -6 ball tracks or more but not more than 8, with -a thread, -an external involute spline with 21 or more but not more than 38 teeth, -for running with bearing balls made of steel with a carbon content of 0,48 % or more but not more than 0,57 %, -forged, turned, milled and hardened

8708509950 80

- - - - - - Inboard constant velocity joint tripod housing, with: -an outer diameter of 67,0 mm or more but not more than 99,0 mm, -3 cold calibrated roller tracks with a diameter of 29,95 mm or more but not more than 49,2 mm, -an external spline with 21 teeth or more but not more than 41, -forged, turned, rolled and hardened

8708509955 80

- - - - - - Outboard constant velocity joint inner race, part of the vehicle's drive system, with: -6 or more but not more than 8 ball tracks, suitable for bearing balls with a diameter of 12,0 mm or more but not more than 24,0 mm, -forged, turned, milled, broached and hardened

8708509960 80

- - - - - - Inboard constant velocity joint tripod spider, part of the vehicle's drive system, with: -3 trunnions with a diameter of 17,128 mm or more but not more than 25,468 mm, -forged, turned, broached and hardened

8708509990 80

- - - - - - Other

8708700000 80

- Road wheels and parts and accessories thereof

8708701000 80

- - For the industrial assembly of: Pedestrian-controlled tractors of subheading 8701 10; Vehicles of heading 8703; Vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm$3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm$3; Vehicles of heading 8705

8708701015 10

- - - Wheels of aluminium, whether or not with their accessories and whether or not fitted with tyres

8708701015 80

- - - - fitted with pneumatic tyres, new or retreaded, of rubber, of a kind used for buses or lorries, with a load index exceeding 121

8708701050 80

- - - - Other

8708701080 10

- - - Other

8708701080 20

- - - - Road wheels of steel, whether or not with their accessories and whether or not fitted with tyres, for the industrial assembly of vehicles of heading 8703; vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm³ or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm³; vehicles of heading 8705

8708701080 80

- - - - - fitted with pneumatic tyres, new or retreaded, of rubber, of a kind used for buses or lorries, with a load index exceeding 121

8708701085 80

- - - - - Other

8708701092 10

- - - - Other

8708701092 80

- - - - - fitted with pneumatic tyres, new or retreaded, of rubber, of a kind used for buses or lorries, with a load index exceeding 121

8708701095 80

- - - - - Other

8708705000 10

- - Other

8708705000 80

- - - Wheels of aluminium; parts and accessories of wheels, of aluminium

8708705015 10

- - - - Wheels of aluminium, whether or not with their accessories and whether or not fitted with tyres

8708705015 80

- - - - - fitted with pneumatic tyres, new or retreaded, of rubber, of a kind used for buses or lorries, with a load index exceeding 121

8708705050 80

- - - - - Other

8708705080 10

- - - - Other

8708705080 80

- - - - - fitted with pneumatic tyres, new or retreaded, of rubber, of a kind used for buses or lorries, with a load index exceeding 121

8708705085 80

- - - - - Other

8708709100 80

- - - Wheel centres in star form, cast in one piece, of iron or steel

8708709115 80

- - - - fitted with pneumatic tyres, new or retreaded, of rubber, of a kind used for buses or lorries, with a load index exceeding 121

8708709190 80

- - - - Other

8708709900 80

- - - Other

8708709920 10

- - - - Fitted with pneumatic tyres, new or retreaded, of rubber, of a kind used for buses or lorries, with a load index exceeding 121

8708709920 80

- - - - - Road wheels of steel, whether or not with their accessories

8708709930 80

- - - - - Other

8708709980 10

- - - - Other

8708709980 80

- - - - - Road wheels of steel, whether or not with their accessories and whether or not fitted with tyres, designed for - road tractors, - motor vehicles for the transport of persons and/or the transport of goods, - special purpose motor vehicles (for example, fire fighting vehicles, spraying lorries); excluding: - wheels for road quad bikes, - wheels for motor vehicles specifically designed for uses other than on public roads (for example, wheels for agricultural tractors or forestry tractors, for forklifts, for pushback tractors, for dumpers designed for off-highway use)

8708709985 80

- - - - - Other

8708800000 80

- Suspension systems and parts thereof (including shock-absorbers)

8708802000 80

- - For the industrial assembly of: Vehicles of heading 8703; Vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm$3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm$3; Vehicles of heading 8705

8708802010 80

- - - Upper strut insulator containing - a metal holder with three mounting screws, and - a rubber bump for use in the manufacture of goods of Chapter 87

8708802090 80

- - - Other

8708803500 10

- - Other

8708803500 80

- - - Suspension shock-absorbers

8708803510 80

- - - - Upper strut insulator containing - a metal holder with three mounting screws, and - a rubber bump for use in the manufacture of goods of Chapter 87

8708803590 80

- - - - Other

8708809920 80

- - - - - Aluminium suspension link arm, with dimensions of: -a height of 50 mm or more but not more than 150 mm, -a width of 10 mm or more but not more than 100 mm, -a length of 100 mm or more but not more than 600 mm, -a mass of 1000 g or more but not more than 3000 g, Equipped with at least two bushed holes made of aluminium alloy with the following characteristics: -a tensile strength of 200 mPa or more , -a strength of 19 kN or more, -a stiffness of 5 kN/mm or more but not more than 9 kN/mm, -a frequency of 400 Hz or more but not more than 600 Hz

8708809930 80

- - - - - Surface-hardened, steel piston rod for a hydraulic or hydropneumatic shock absorber of motor vehicles: -with a chrome coating, -of a diameter of 11 mm or more, but not more than 28 mm, -of a length of 80 mm or more, but not more than 600 mm, with a threaded end or a mandrel for resistance welding

8708809990 80

- - - - - Other

8708910000 10

- Other parts and accessories

8708910000 80

- - Radiators and parts thereof

8708912000 80

- - - For the industrial assembly of: Pedestrian-controlled tractors of subheading 8701 10; Vehicles of heading 8703; Vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm$3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm$3; Vehicles of heading 8705

8708912020 80

- - - - Aluminium cooler using compressed air with a ribbed design of a kind used in the manufacture of goods of Chapter 87

8708912030 80

- - - - Aluminium alloy inlet or outlet air tank of heat exchangers for car cooling systems, manufactured to standard EN AC 42100 or EN AC 43000 T6 with - an insulating area flatness of not more than 0,1 mm, - a permissible particle quantity of 0,3 mg per tank, - a distance between pores of 2 mm or more, - pore sizes of not more than 0,4 mm, and - not more than 3 pores larger than 0,2mm -with a weight of 0,2kg or more but not more than 3kg

8708912090 80

- - - - Other

8708913500 10

- - - Other

8708913500 80

- - - - Radiators

8708913510 80

- - - - - Aluminium cooler using compressed air with a ribbed design of a kind used in the manufacture of goods of Chapter 87

8708913520 80

- - - - - Turbocharger cooling duct containing: -an aluminum alloy duct with at least one metal holder and at least two mounting holes, -a rubber pipe with clips, -a stainless steel flange highly resistant to corrosion [SUS430JIL], for use in the manufacture of compression ignition engines of motor vehicles

8708913590 80

- - - - - Other

8708919100 10

- - - - Parts

8708919100 80

- - - - - Of closed-die forged steel

8708919900 80

- - - - - Other

8708919930 80

- - - - - - Aluminium alloy inlet or outlet air tank of heat exchangers for car cooling systems, manufactured to standard EN AC 42100 or EN AC 43000 T6 with - an insulating area flatness of not more than 0,1 mm, - a permissible particle quantity of 0,3 mg per tank, - a distance between pores of 2 mm or more, - pore sizes of not more than 0,4 mm, and - not more than 3 pores larger than 0,2mm -with a weight of 0,2kg or more but not more than 3kg

8708919940 80

- - - - - - Assembly for supplying compressed air, whether or not with a resonator, comprising at least: - one solid aluminium tube whether or not with mounting bracket, - one flexible rubber hose, and - one metal clip for use in the manufacture of goods of Chapter 87

8708919990 80

- - - - - - Other

8708920000 80

- - Silencers (mufflers) and exhaust pipes; parts thereof

8708922000 80

- - - For the industrial assembly of: Pedestrian-controlled tractors of subheading 8701 10; Vehicles of heading 8703; Vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm$3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm$3; Vehicles of heading 8705

8708929100 10

- - - - Parts

8708929100 80

- - - - - Of closed-die forged steel

8708929900 80

- - - - - Other

8708929910 80

- - - - - - Exhaust system inner liner: -with a wall thickness of 0,7 mm or more but not more than 1,3 mm, -made of stainless steel sheets or coil class 1.4310 and 1.4301 according to norm EN 10088, -whether or not with mounting holes for use in the manufacture of exhaust systems for automobiles

8708929920 80

- - - - - - Pipe for guiding exhaust gases from the combustion engine: -with a diameter of 40 mm or more but not more than 100 mm, -with a length of 90 mm or more but not more than 410 mm, -with a wall thickness of 0,7 mm or more but not more than 1,3 mm, -of stainless steel for use in the manufacture of exhaust systems for automobiles

8708929930 80

- - - - - - Exhaust system end cover: -with a wall thickness of 0,7 mm or more but not more than 1,3 mm, -made of stainless steel class 1.4310 and 1.4301 according to norm EN 10088, -whether or not with inner liner, -whether or not with surface treatment for use in the manufacture of exhaust systems for automobiles

8708929990 80

- - - - - - Other

8708930000 80

- - Clutches and parts thereof

8708931000 80

- - - For the industrial assembly of: Pedestrian-controlled tractors of subheading 8701 10; Vehicles of heading 8703; Vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm$3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm$3; Vehicles of heading 8705

8708931040 80

- - - - Clutch pedal with electronic parking brake connection (EPB), whether or not with sending signal function for: - cruise control reset, - electronic parking brake release, -start and stop engine management under Idle Stop and Go system (ISG), for use in the manufacture of passenger vehicles

8708931090 80

- - - - Other

8708939000 80

- - - Other

8708939040 80

- - - - Clutch pedal with electronic parking brake connection (EPB), whether or not with sending signal function for: - cruise control reset, - electronic parking brake release, -start and stop engine management under Idle Stop and Go system (ISG), for use in the manufacture of passenger vehicles

8708939090 80

- - - - Other

8708940000 80

- - Steering wheels, steering columns and steering boxes; parts thereof

8708942000 80

- - - For the industrial assembly of: Vehicles of heading 8703; Vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm$3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm$3; Vehicles of heading 8705

8708942010 80

- - - - Rack steering gear in aluminium housing with inner tie rod joints (axial joints) or with tie rods for use in the manufacture of goods of Chapter 87.

8708942090 80

- - - - Other

8708943500 10

- - - Other

8708943500 80

- - - - Steering wheels, steering columns and steering boxes

8708943520 80

- - - - - Rack steering gear in aluminium housing with inner tie rod joints (axial joints) or with tie rods for use in the manufacture of goods of Chapter 87.

8708943590 80

- - - - - Other

8708949100 10

- - - - Parts

8708949100 80

- - - - - Of closed-die forged steel

8708949900 80

- - - - - Other

8708950000 80

- - Safety airbags with inflator system; parts thereof

8708951000 80

- - - For the industrial assembly of: Pedestrian-controlled tractors of subheading 8701 10; Vehicles of heading 8703; Vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm$3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm$3; Vehicles of heading 8705

8708951020 80

- - - - Inflatable safety cushion of high strength polyamide fibre: - sewn, - folded, - with three-dimensionally applied silicone bonding for air bag cavity forming and load-regulated air bag sealing - suitable for cool inflator technology

8708951030 80

- - - - Inflatable sewn safety cushion of high strength polyamide fibre:  -folded into three-dimensional packing form, fixed by thermal forming, dedicated fixation seams, fabric cover or plastic staples, or  -flat safety cushion with or without thermal folding

8708951090 80

- - - - Other

8708959100 10

- - - Other

8708959100 80

- - - - Of closed-die forged steel

8708959900 80

- - - - Other

8708959930 80

- - - - - Inflatable safety cushion of high strength polyamide fibre: - sewn, - folded, - with three-dimensionally applied silicone bonding for air bag cavity forming and load-regulated air bag sealing - suitable for cool inflator technology

8708959940 80

- - - - - Inflatable sewn safety cushion of high strength polyamide fibre:  -folded into three-dimensional packing form, fixed by thermal forming, dedicated fixation seams, fabric cover or plastic staples, or  -flat safety cushion with or without thermal folding

8708959950 80

- - - - - Airbag inflator containing both pyrotechnics and cold gas as propellant for safety airbags of vehicles, in each individual consignment of 1 000 pieces or more

8708959990 80

- - - - - Other

8708990000 80

- - Other

8708991000 80

- - - For the industrial assembly of: Pedestrian-controlled tractors of subheading 8701 10; Vehicles of heading 8703; Vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm$3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm$3; Vehicles of heading 8705

8708991025 80

- - - - Plastic air guide for directing air flow to the surface of intercooler for use in the production of motor vehicles

8708991055 80

- - - - Silicone or plastic keyboards, comprising: -parts of common metal, and -whether or not comprising parts of plastic, -epoxy resin reinforced with fiberglass or wood, -whether or not printed or surface-treated, -with or without electrical conductors -with or without a membrane bonded to the keyboard, -with or without mono or multilayer protective film

8708991060 80

- - - - Aluminium engine bracket, with dimensions of: -height of more than 10 mm but not more than 200 mm, -width of more than 10 mm but not more than 250 mm, -length of more than 10 mm but not more than 200 mm, equipped with at least two fixing holes, made of aluminium alloys ENAC-46100 or ENAC-42100 (based on the norm EN:1706) with following characteristics: -internal porosity not more than 1 mm, -outer porosity not more than 2 mm, -rockwell hardness HRB 10 or more, of a kind used in the production of suspensions systems for engines in motor vehicles

8708991090 80

- - - - Other

8708999300 10

- - - Other

8708999300 80

- - - - Of closed-die forged steel

8708999700 80

- - - - Other

8708999718 80

- - - - - Hydrostatic speed changer: -with a hydro pump and a differential with wheel axle, -whether or not with a fan impeller and/or a pulley, for use in the manufacture of tractors of subheadings 8701 91 90 and 8701 92 90, whose main function is that of a lawn mower

8708999722 80

- - - - - Silicone or plastic keyboards, comprising: -parts of common metal, and -whether or not comprising parts of plastic, -epoxy resin reinforced with fiberglass or wood, -whether or not printed or surface-treated, -with or without electrical conductors -with or without a membrane bonded to the keyboard, -with or without mono or multilayer protective film

8708999728 80

- - - - - A set of Type 4 H2 cylinders, in accordance with the EC 79 standard, consisting of two to eight cylinders on aluminum frames: -cylinders made of high density polyethylene (HDPE) composite reinforced with a braid of glass and carbon fibers in epoxy resin, -with an operating pressure of not less than 35 MPa, -with a durability declared by the manufacturer of not less than 20 years, -with a cylinder capacity of 180 liters or more but not more than 375 liters, -equipped with a set of solenoid, manual and safety PRD valves, -with a total width of 1 800 mm or more but not more than 2 300 mm, -with a total height of 400 mm or more but not more than 500 mm, -with a total length of 1 200 mm or more but not more than 3 600 mm

8708999738 80

- - - - - A set of Compressed Natural Gas (CNG) cylinders type CNG-4, in accordance with the ECE R110 standard, consisting of four or five cylinders on aluminum frames: -made of high density polyethylene (HDPE) composite reinforced with a braid of glass and carbon fibers in epoxy resin, -with an operating pressure of not less than 20 MPa, -with a shelf life declared by the manufacturer of not less than 20 years, -with a cylinder capacity of 315 liters or more but not more than 375 liters, -equipped with a set of solenoid, manual and safety PRD valves, -with a total width of 2 200 mm or more but not more than 2 300 mm, -with a total height of 450 mm or more but not more than 460 mm, -with a total length of 3500 mm or more but not more than 3 600 mm

8708999745 80

- - - - - Plastic air guide for directing air flow to the surface of intercooler for use in the production of motor vehicles

8708999750 80

- - - - - Aluminium engine bracket, with dimensions of: -height of more than 10 mm but not more than 200 mm, -width of more than 10 mm but not more than 250 mm, -length of more than 10 mm but not more than 200 mm, equipped with at least two fixing holes, made of aluminium alloys ENAC-46100 or ENAC-42100 (based on the norm EN:1706) with following characteristics: -internal porosity not more than 1 mm, -outer porosity not more than 2 mm, -rockwell hardness HRB 10 or more, of a kind used in the production of suspensions systems for engines in motor vehicles

8708999755 80

- - - - - Assembly for supplying compressed air, whether or not with a resonator, comprising at least: - one solid aluminium tube whether or not with mounting bracket, - one flexible rubber hose, and - one metal clip for use in the manufacture of goods of Chapter 87

8708999775 80

- - - - - Aluminium alloy support bracket, with mounting holes, whether or not with fixation nuts, for indirect connection of the gearbox to the car body for use in the manufacture of goods of Chapter 87

8708999790 80

- - - - - Other