# Code 850131: Of an output not exceeding 750 W EU customs tariff 2026 Web page: https://hscode.info/en/2026/850131 - [85](https://hscode.info/en/2026/85.md) ELECTRICAL MACHINERY AND EQUIPMENT AND PARTS THEREOF; SOUND RECORDERS AND REPRODUCERS, TELEVISION IMAGE AND SOUND RECORDERS AND REPRODUCERS, AND PARTS AND ACCESSORIES OF SUCH ARTICLES - [8501](https://hscode.info/en/2026/8501.md) Electric motors and generators (excluding generating sets) - [850131](https://hscode.info/en/2026/850131.md) Other DC motors; DC generators, other than photovoltaic generators ## Codes - [8501310010](https://hscode.info/en/2026/8501310010.md) Motors of an output exceeding 735 W, DC generators, for use in civil aircraft - [8501310020](https://hscode.info/en/2026/8501310020.md) For use in certain types of aircraft - [8501310045](https://hscode.info/en/2026/8501310045.md) Other - [8501310045](https://hscode.info/en/2026/8501310045.md) DC motors, brushless, with: - an external diameter of 90 mm or more, but not more than 110 mm, - a rated speed of not more than 3 680 rpm, - an output of 600 W or more but not more than 740 W at 2 300 rpm and at 80 °C, - a supply voltage of 12 V, - a torque of not more than 5,67 Nm, - a rotor position sensor, - an electronic star-point relay, and - for use with an electric power steering control module - [8501310047](https://hscode.info/en/2026/8501310047.md) Motor for automotive electric seat adjustment applications: -with a shaft output on both motor sides, -consisting of a permanently excited DC motor, -whether brushed or brushless, -whether or not with electronic control unit, -whether or not with Hall Effect Sensor, -with a nominal voltage of 8 V or more but not more than 16 V, -with a rated output mechanical power not exceeding 120 W, and -with a specified temperature range from -40 °C to 160 °C, for use in the manufacture of automotive components for car's seats - [8501310048](https://hscode.info/en/2026/8501310048.md) Brushless DC electric motors: -with a rated power of 240 W or more, but not more than 260 W, -with a voltage of 36 V or higher, but not higher than 52 V -with a torque of 20 Nm or more, but not more than 140 Nm, -with a housing made of aluminum, aluminum alloy or plastic, -with or without a built-in controller, -with a communication function in the LIN or UART interface, -weighing 1,5 kg or more, but not more than 5,0 kg, -adapted for mounting in a bicycle frame for use in the manufacture of e-bikes - [8501310049](https://hscode.info/en/2026/8501310049.md) Brushless DC electric motors: - with a rated power of 240 W or more, but not more than 260 W, - with a voltage of 24 V or higher, but not higher than 52 V, - with a torque of 30 Nm or more, but not more than 62 Nm, - with a LIN, UART or CAN communication interface, - with an internal planetary gearbox with fixed or variable ratio or direct drive, - with a housing made of aluminum or aluminium alloy, - with a weight of 1,5kg or more, but not more than 6kg, - adapted for mounting in the front or rear bicycle wheel, for use in the manufacture of e-bikes - [8501310050](https://hscode.info/en/2026/8501310050.md) DC motors, brushless, with: - an external diameter of 80 mm or more, but not more than 200 mm, - a supply voltage of 4 V or more, but not more than 16 V, - an output at 20 °C of 200 W or more, but not more than 750 W, - a torque at 20 °C of 2,00 Nm or more, but not more than 7,00 Nm, - a rated speed at 20 °C of 600 rpm or more, but not more than 3 100 rpm, - with or without a pulley, - with or without an electronic power steering sensor/controller - [8501310052](https://hscode.info/en/2026/8501310052.md) Electric brushless direct current motor finished with biocompatible materials such as stainless steel according to specification 17-4 PH or type 303, 316L, 400 with: -a three-phase winding, -an output power not exceeding 280 W, -a length with gearhead of 116,1 mm or more but not more than 117,2 mm, -an external diameter of 13,86 mm or more but no more than 13,92 mm, -a maximum torque of motor with gearhead 246,6 mNm in 25℃, -a no-load radial speed of motor with gearhead with 9 900 rpm, at 24V in 25°C, -a weight of motor with gearhead of 70,5 g or more but not more than 71,5 g, a resistance to peak temperature of 140°C or more (non-operating), a maximal air leak between shaft and shaft seals of 15 Pa/s at given 2 Bars of pressure, -14 functional pins for power and control purpose, -a flexible printed circuit with length of 245 mm but no longer than 255 mm with mounted 8 pin male connector for use in the manufacture of medical devices with right-left rotation and oscillation function - [8501310054](https://hscode.info/en/2026/8501310054.md) Brushless DC electric motor, with: -a rated voltage of 310 V, -a rated power of 350 W or more but not more than 368 W, -an input power of 500 W or more but not more than 550 W, -output power of 350 W or more but not more than 400 W, -an external diameter without bracket connector and pulley of 143,2 mm or more but not more than 143,8 mm, -a rated speed of 16300 rpm or more but not more than 16500 rpm, -a weight of 2,33 kg or more but not more than 2,40 kg, -a pulley - [8501310055](https://hscode.info/en/2026/8501310055.md) DC motor with or without commutator, for driving hand-held power tools, lawn mowers or home appliances, with: -an external diameter of 24,2 mm or more, but not more than 140 mm, -a rated speed of 3300 rpm or more, but not more than 26200 rpm, -a rated supply voltage of 3,6 V or more, but not more than 230 V, -an output power of more than 37,5 W , but not more than 2400 W, -a free load current of not more than 20,1 A, -a maximum efficiency of 50 % or more, - [8501310056](https://hscode.info/en/2026/8501310056.md) DC motor, brushless, integrated with an Electronic Control Unit (ECU), defined as a Power Pack with: -a safety feature and mechanism designed for prevention of critical hazards like self-steer by single failure, -a CAN-communication interface, -an external sensor interface, -operating temperature range of -40℃ to 95℃ or broader, -compliance with standard IP6K9K for water and dustproofness, -supply voltage of 9 V or more, but not more than 16 V, -rated power output of 500 W or more, but not higher than 750 W, -rated torque of 3 Nm or more, but not more than 6 Nm, -length of 150 mm or more, but not more than 250 mm, -width of 100 mm or more, but not more than 150 mm, -height of 80 mm or more, but not more than 120 mm - [8501310057](https://hscode.info/en/2026/8501310057.md) Brushless DC electric motor with LCD control indicator and/or control unit with buttons: -with an output power of 200 W or more, but not more than 700 W, -with a supply voltage of 30 V or more, but not more than 60 V, -with a torque of 30 Nm or more, but not more than 200 Nm, -with a height of 117 mm or more, but not more than 146 mm, -with a length of 117 mm or more, but not more than 223 mm, -with a width of 135 mm or more, but not more than 190 mm, -with a weight of 2 kg or more but not more than 5 kg, -designed to be mounted in a frame, front or rear bicycle wheel, -equipped with sockets, at least for cable connection with LCD control indicator, for use in the manufacture of electric bicycles - [8501310058](https://hscode.info/en/2026/8501310058.md) Permanently excited DC motor with: -an external diameter of 27 mm or more but not more than 90 mm, including mounting flange, -a rated speed of not more than 25 000 rpm, -an output of 45 W or more but not more than 400 W, and -a supply voltage of 9 V or more but not more than 50 V, -whether or not a multiple-phase winding, -whether or not with a drive disc, -whether or not with a crankcase, -whether or not with a fan, -whether or not with a cap assembly, -whether or not with a sun gear, -whether or not with a speed and rotational direction encoder, -whether or not with or without a speed or rotational direction sensor of resolver type or Hall effect type, -whether or not with a mounting flange for use in the manufacture of air suspension seats in tractors, earthmoving machines and forklifts or for use in the manufacture of actuators for height-adjustable furniture - [8501310063](https://hscode.info/en/2026/8501310063.md) Ready for installation in vehicles or equipment of headings 8432 and 8433, brushless and permanently excited direct current motor with: - a specified speed of not more than 6000rpm, - a minimum output of 400W, but not more than 1,3kW (at 12 V), or with a minimum output of 750W but not more than 1,55kW (at 36 V), - a flange diameter of 85mm or more but not more than 200mm, - a maximum length of 335mm, measured from the beginning of the shaft to the outer ending, - a housing length of not more than 265mm, measured from the flange to the outer ending, - a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an O-ring and grease), - a stator with single T-tooth design and single coil windings in 9/6 or 12/8 or 12/10 topology, and - surface magnets, - whether or not with electronic power steering controller, - whether or not with pulley or coupling, - whether or not with rotor position sensor - [8501310068](https://hscode.info/en/2026/8501310068.md) Camshaft actuator for controlling the timing of valve opening by using electromotor in a continuous variable valve timing system of an internal combustion piston engine, of: -a length of 110 mm or more but not more than 140 mm, -a width of 90 mm or more but not more than 130 mm, -a height of 80 mm or more but not more than 110 mm for use in the manufacture of engines of motor vehicles - [8501310085](https://hscode.info/en/2026/8501310085.md) Power transmission device for controlling the output of exhaust gas turbochargers, consisting of: - a DC motor of an output not exceeding 600 W, - for usage with a supply voltage of 8 V or more but no more than 48 V, - with motor connection (plug-in connection), - whether or not with position sensor, - whether or not with integrated control and power electronics, - whether or not with spring mechanism for resetting the lever, - built in a housing with reduction gear and lever attached to the motor drive shaft, or - built in a housing with threads integrated into the rotor of the motor for linear movement of the integrated control rod - [8501310099](https://hscode.info/en/2026/8501310099.md) Other ## Import duties and measures | Origin | Duty | From | Until | Measure | Legal base | | - | - | - | - | - | - | | ERGA OMNES (1011) | NAR | 01-01-2008 | | Supplementary unit | Regulation 2658/87 | | Bosnia and Herzegovina (BA) | 0 % | 01-01-2009 | | Tariff preference | Decision 0474/08 | | North Macedonia (MK) | 0 % | 01-01-2009 | | Tariff preference | Decision 0239/04 | | Ukraine (UA) | 0 % | 01-01-2016 | | Tariff preference | Decision 0295/14 | | GSP - General arrangements (2020) | 0 % | 01-01-2023 | | Tariff preference | Regulation 0978/12 | | Singapore (SG) | 0 % | 01-01-2027 | | Tariff preference | Decision 1875/19 | | Serbia (XS) | 0 % | 01-02-2010 | | Tariff preference | Decision 0036/10 | | Peru (PE) | 0 % | 01-03-2013 | | Tariff preference | Decision 0735/12 | | Albania (AL) | 0 % | 01-04-2009 | | Tariff preference | Decision 0332/09 | | Kosovo (XK) | 0 % | 01-04-2016 | | Tariff preference | Decision 0342/16 | | Montenegro (ME) | 0 % | 01-05-2010 | | Tariff preference | Decision 0224/10 | | New Zealand (NZ) | 0 % | 01-05-2024 | | Tariff preference | Decision 0244/24 | | Korea, Republic of (South Korea) (KR) | 0 % | 01-07-2011 | | Tariff preference | Decision 0265/11 | | Central America (2200) | 0 % | 01-08-2013 | | Tariff preference | Decision 0734/12 | | Viet Nam (VN) | 0 % | 01-08-2020 | | Tariff preference | Decision 0753/20 | | ERGA OMNES (1011) | 0 % | 01-11-2018 | | Airworthiness tariff suspension | Regulation 1517/18 | | Russian Federation (RU) | Cond: B cert: L-142 (26):; B cert: Y-874 (26):; B cert: L-143 (26):; B cert: Y-859 (26):; B (06): | 19-12-2023 | 31-12-2027 | Import control | Regulation 0833/14 | | EU-Canada agreement: re-imported goods (1006) | 0 % | 21-09-2017 | | Tariff preference | Decision 0037/17 | | Canada (CA) | 0 % | 21-09-2017 | | Tariff preference | Decision 0037/17 | | Singapore (SG) | 0 % | 21-11-2019 | 31-12-2026 | Tariff preference | Decision 1875/19 | | Belarus (BY) | Cond: Y cert: Y-727 (29):; Y cert: Y-728 (29):; Y cert: L-152 (29):; Y cert: Y-870 (29):; Y (09): | 25-02-2025 | | Import control | Regulation 0765/06 | | Japan (JP) | 0 % | 01-02-2020 | | Tariff preference | Decision 1907/18 | | Mercosur (5500) | 0 % | 01-05-2026 | | Tariff preference | Decision 0183/26 | | North Korea (Democratic People’s Republic of Korea) (KP) | Cond: Y cert: Y-920 (29):; Y (09): | 01-09-2017 | | Import control on restricted goods and technologies | Regulation 1509/17 | | Switzerland (CH) | 0 % | 01-01-1988 | | Tariff preference | Regulation 2840/72 | | Faroe Islands (FO) | 0 % | 01-01-1997 | | Tariff preference | Decision 0126/97 | | Melilla (XL) | 0 % | 01-01-1999 | | Tariff preference | Accession act 0001/85 | | Occupied palestinian Territory (PS) | 0 % | 01-01-2001 | | Tariff preference | Decision 0430/97 | | San Marino (SM) | 0 % | 01-01-2006 | | Customs Union Duty | Decision 0245/02 | | Türkiye (TR) | 0 % | 01-01-2006 | | Customs Union Duty | Decision 0142/96 | | Andorra (AD) | 0 % | 01-01-2006 | | Customs Union Duty | Decision 0680/90 | | EU-Switzerland agreement: re-imported goods (1007) | 0 % | 01-01-2007 | | Tariff preference | Regulation 2840/72 | | GSP-EBA (Special arrangement for the least-developed countries - Everything But Arms) (2005) | 0 % | 01-01-2014 | | Tariff preference | Regulation 0978/12 | | GSP+ (incentive arrangement for sustainable development and good governance) (2027) | 0 % | 01-01-2014 | | Tariff preference | Regulation 0978/12 | | Moldova, Republic of (MD) | 0 % | 01-01-2016 | | Tariff preference | Decision 0492/14 | | Ecuador (EC) | 0 % | 01-01-2017 | | Tariff preference | Decision 2369/16 | | OCTs (Overseas Countries and Territories) (2080) | 0 % | 01-01-2021 | | Tariff preference | Decision 1764/21 | | United Kingdom (GB) | 0 % | 01-01-2021 | | Tariff preference | Decision 2253/20 | | Ghana (GH) | 0 % | 01-01-2027 | | Tariff preference | Decision 1850/16 | | Chile (CL) | 0 % | 01-02-2025 | | Tariff preference | Decision 3016/24 | | Tunisia (TN) | 0 % | 01-03-1998 | | Tariff preference | Decision 0238/98 | | Morocco (MA) | 0 % | 01-03-2000 | | Tariff preference | Decision 0204/00 | | Lebanon (LB) | 0 % | 01-04-2006 | | Tariff preference | Decision 0356/06 | | Jordan (JO) | 0 % | 01-05-2002 | | Tariff preference | Decision 0357/02 | | Egypt (EG) | 0 % | 01-06-2004 | | Tariff preference | Decision 0635/04 | | Ceuta (XC) | 0 % | 01-07-1991 | | Tariff preference | Accession act 0001/85 | | EEA - European Economic Area (2012) | 0 % | 01-07-2007 | | Tariff preference | Decision 0001/94 | | Mexico (MX) | 0 % | 01-07-2016 | | Tariff preference | Decision 0415/00 | | Kenya (KE) | 0 % | 01-07-2024 | | Tariff preference | Decision 1647/24 | | United States (US) | 0 % | 01-07-2026 | | Tariff preference | Regulation 1455/26 | | Syria (SY) | 0 % | 01-08-1994 | | Tariff preference | Regulation 2216/78 | | Colombia (CO) | 0 % | 01-08-2013 | | Tariff preference | Decision 0735/12 | | Algeria (DZ) | 0 % | 01-09-2005 | | Tariff preference | Decision 0690/05 | | Georgia (GE) | 0 % | 01-09-2014 | | Tariff preference | Decision 0494/14 | | ERGA OMNES (1011) | 2 EUR | 01-11-2026 | | Union handling fee | Regulation 2108/26 | | ERGA OMNES (1011) | 3 EUR | 01-11-2026 | | Low-value consignment customs duty | Regulation 0382/26 | | Ivory Coast (CI) | 0 % | 02-12-2019 | | Tariff preference | Decision 0156/09 | | Preferential origin in accordance with the Agreement in the form of an Exchange of Letters between the European Union and the Kingdom of Morocco on the amendment of Protocols 1 and 4 to the Euro-Mediterranean Agreement establishing an association between the European Communities and their Member States, of the one part, and the Kingdom of Morocco, of the other part. (2000) | 0 % | 03-10-2025 | | Tariff preference | Decision 2022/25 | | Cameroon (CM) | 0 % | 04-08-2014 | | Tariff preference | Decision 0152/09 | | South Africa (ZA) | 0 % | 10-10-2016 | | Tariff preference | Decision 1623/16 | | SADC EPA (1035) | 0 % | 10-10-2016 | | Tariff preference | Decision 1623/16 | | Armenia (AM) | 0 % | 10-10-2026 | 11-10-2028 | Tariff preference | Regulation 2269/26 | | Eastern and Southern Africa States (1034) | 0 % | 14-05-2012 | | Tariff preference | Decision 0196/12 | | Ghana (GH) | 0 % | 15-12-2016 | 31-12-2026 | Tariff preference | Decision 1850/16 | | Israel (IL) | 0 % | 16-05-2023 | | Tariff preference | Decision 0855/09 | | Solomon Islands (SB) | 0 % | 17-05-2020 | | Tariff preference | Decision 0729/09 | | Papua New Guinea (PG) | 0 % | 20-12-2009 | | Tariff preference | Decision 0729/09 | | Ukraine (UA) | Cond: Y cert: Y-984 (29):; Y cert: N-954 (29):; Y cert: N-864 (29):; Y (09): | 24-06-2026 | | Import control | Regulation 0263/22 | | Ukraine (UA) | Cond: Y cert: Y-997 (26):; Y cert: N-864 (26):; Y cert: N-954 (26):; Y (06): | 24-06-2026 | | Import control | Regulation 0692/14 | | North Korea (Democratic People’s Republic of Korea) (KP) | | 28-02-2018 | | Import prohibition | Regulation 0285/18 | | Fiji (FJ) | 0 % | 28-07-2014 | | Tariff preference | Decision 0729/09 | | CARIFORUM (1033) | 0 % | 29-12-2008 | | Tariff preference | Decision 0805/08 | | Samoa (WS) | 0 % | 31-12-2018 | | Tariff preference | Decision 0729/09 | Source: European Commission, TARIC, prepared by hscode.info. For many lookups or automated access: API and MCP server: https://hscode.info/en/developers.md