Import Handelsbeschränkungen für 3901908010 80
Diese Tabelle enthält Informationen zu den Handelsbeschränkungen für den Import von Waren in die EU und die EU in Drittländer. Die Tabelle enthält Informationen zu den Handelsbeschränkungen, die aufgrund von Zollunionen, Präferenzen, Tarifquoten, Zollunionen, Veterinärkontrollen, Drittländerzöllen und Nicht-Präferenz-Tarifquoten erhoben werden.
| Ursprungsland | Start | Zoll / Steuer | Rechtsgrundlage Maßnahmetyp | |
|---|---|---|---|---|
| EU-Switzerland agreement: re-imported goods 1007 | 01-01-2007 | 0 % | Tarifpräferenz 142 | |
| Singapore SG | 01-01-2027 | 0 % | Tarifpräferenz 142 | |
| Switzerland CH | 20-12-1972 | 0 % | Tarifpräferenz 142 | |
| Singapore SG | 21-11-2019 – 31-12-2026 | 0 % | Tarifpräferenz 142 | |
| Kosovo XK | 01-01-2017 | 0 % | Tarifpräferenz 142 | |
| Bosnia and Herzegovina BA | 01-01-2017 | 0 % | Tarifpräferenz 142 | |
| North Macedonia MK | 01-01-2017 | 0 % | Tarifpräferenz 142 | |
| Peru PE | 01-01-2017 | 0 % | Tarifpräferenz 142 | |
| Montenegro ME | 01-01-2017 | 0 % | Tarifpräferenz 142 | |
XS | Serbia XS | 01-01-2017 | 0 % | Tarifpräferenz 142 |
| Albania AL | 01-01-2017 | 0 % | Tarifpräferenz 142 | |
| Ukraine UA | 01-01-2019 | 0 % | Tarifpräferenz 142 | |
2020 | GSP - General arrangements 2020 | 01-01-2023 | 3 % | Tarifpräferenz 142 |
| Japan JP | 01-02-2020 | 0 % | Tarifpräferenz 142 | |
| New Zealand NZ | 01-05-2024 | 0 % | Tarifpräferenz 142 | |
5500 | Mercosur 5500 | 01-05-2026 – 31-12-2026 | 5.2 % | Tarifpräferenz 142 |
| Armenia AM | 10-10-2026 – 11-10-2028 | 0 % | Tarifpräferenz 142 | |
| Canada CA | 21-09-2017 | 0 % | Tarifpräferenz 142 | |
| EU-Canada agreement: re-imported goods 1006 | 21-09-2017 | 0 % | Tarifpräferenz 142 | |
1011 | ERGA OMNES 1011 | 01-01-2017 | 0 % | Autonome Sperre unter Endverwendung 115 |
1011 | ERGA OMNES 1011 | 01-01-2017 | 6.5 % | Drittländer-Zoll 103 |
| Faroe Islands FO | 01-01-1997 | 0 % | Tarifpräferenz 142 | |
XL | Melilla XL | 01-01-1999 | 0 % | Zugangsakt0001/85 Tarifpräferenz 142 |
| Occupied palestinian Territory PS | 01-01-2001 | 0 % | Tarifpräferenz 142 | |
| Andorra AD | 01-01-2006 | 0 % | Zollunion-Zoll 106 | |
| San Marino SM | 01-01-2006 | 0 % | Zollunion-Zoll 106 | |
| Türkiye TR | 01-01-2006 | 0 % | Zollunion-Zoll 106 | |
2027 | GSP+ (incentive arrangement for sustainable development and good governance) 2027 | 01-01-2014 | 0 % | Tarifpräferenz 142 |
2005 | GSP-EBA (Special arrangement for the least-developed countries - Everything But Arms) 2005 | 01-01-2014 | 0 % | Tarifpräferenz 142 |
| Moldova, Republic of MD | 01-01-2016 | 0 % | Tarifpräferenz 142 | |
| Ecuador EC | 01-01-2017 | 0 % | Tarifpräferenz 142 | |
| United Kingdom GB | 01-01-2021 | 0 % | Tarifpräferenz 142 | |
2080 | OCTs (Overseas Countries and Territories) 2080 | 01-01-2021 | 0 % | Tarifpräferenz 142 |
| Ghana GH | 01-01-2027 | 0 % | Tarifpräferenz 142 | |
| Chile CL | 01-02-2025 | 0 % | Tarifpräferenz 142 | |
| Tunisia TN | 01-03-1998 | 0 % | Tarifpräferenz 142 | |
| Morocco MA | 01-03-2000 | 0 % | Tarifpräferenz 142 | |
| Lebanon LB | 01-04-2006 | 0 % | Tarifpräferenz 142 | |
| Jordan JO | 01-05-2002 | 0 % | Tarifpräferenz 142 | |
| Egypt EG | 01-06-2004 | 0 % | Tarifpräferenz 142 | |
XC | Ceuta XC | 01-07-1991 | 0 % | Zugangsakt0001/85 Tarifpräferenz 142 |
2012 | EEA - European Economic Area 2012 | 01-07-2007 | 0 % | Tarifpräferenz 142 |
| Korea, Republic of (South Korea) KR | 01-07-2014 | 0 % | Tarifpräferenz 142 | |
| Mexico MX | 01-07-2016 | 0 % | Tarifpräferenz 142 | |
| Kenya KE | 01-07-2024 | 0 % | Tarifpräferenz 142 | |
| United States US | 01-07-2026 | 0 % | Tarifpräferenz 142 | |
| Syria SY | 01-08-1994 | 0 % | Tarifpräferenz 142 | |
| Colombia CO | 01-08-2013 | 0 % | Tarifpräferenz 142 | |
2200 | Central America 2200 | 01-08-2013 | 0 % | Tarifpräferenz 142 |
| Viet Nam VN | 01-08-2020 | 0 % | Tarifpräferenz 142 | |
| Algeria DZ | 01-09-2005 | 0 % | Tarifpräferenz 142 | |
| Georgia GE | 01-09-2014 | 0 % | Tarifpräferenz 142 | |
1011 | ERGA OMNES 1011 | 01-11-2026 | 2 EUR | Union handling fee 800 |
1011 | ERGA OMNES 1011 | 01-11-2026 | 3 EUR | Low-value consignment customs duty 107 |
| Ivory Coast CI | 02-12-2019 | 0 % | Tarifpräferenz 142 | |
2000 | Preferential origin in accordance with the Agreement in the form of an Exchange of Letters between the European Union and the Kingdom of Morocco on the amendment of Protocols 1 and 4 to the Euro-Mediterranean Agreement establishing an association between the European Communities and their Member States, of the one part, and the Kingdom of Morocco, of the other part. 2000 | 03-10-2025 | 0 % | Tarifpräferenz 142 |
| Cameroon CM | 04-08-2014 | 0 % | Tarifpräferenz 142 | |
1035 | SADC EPA 1035 | 10-10-2016 | 0 % | Tarifpräferenz 142 |
| South Africa ZA | 10-10-2016 | 0 % | Tarifpräferenz 142 | |
1034 | Eastern and Southern Africa States 1034 | 14-05-2012 | 0 % | Tarifpräferenz 142 |
| Ghana GH | 15-12-2016 – 31-12-2026 | 0 % | Tarifpräferenz 142 | |
| Israel IL | 16-05-2023 | 0 % | Tarifpräferenz 142 | |
| Solomon Islands SB | 17-05-2020 | 0 % | Tarifpräferenz 142 | |
| Papua New Guinea PG | 20-12-2009 | 0 % | Tarifpräferenz 142 | |
| Fiji FJ | 28-07-2014 | 0 % | Tarifpräferenz 142 | |
1033 | CARIFORUM 1033 | 29-12-2008 | 0 % | Tarifpräferenz 142 |
| Samoa WS | 31-12-2018 | 0 % | Tarifpräferenz 142 |
| Ursprungsland | Start | Zoll / Steuer | Rechtsgrundlage Maßnahmetyp | |
|---|---|---|---|---|
| Russian Federation RU | 19-12-2023 – 31-12-2027 | Dokument nötig ohne Dokument verboten | Importkontrolle 762 | |
1011 | ERGA OMNES 1011 | 21-05-2026 | Dokument nötig ohne Dokument verboten | Importkontrolle - Abfall 755 |
| Belarus BY | 25-02-2025 | Dokument nötig ohne Dokument verboten | Importkontrolle 760 | |
1011 | ERGA OMNES 1011 | 25-06-2025 | Dokument nötig ohne Dokument verboten | Import control of fluorinated greenhouse gases 724 |
| Iran, Islamic Republic of IR | 30-09-2025 | Dokument nötig ohne Dokument verboten | Importkontrolle 707 | |
| Ukraine UA | 24-06-2026 | Dokument nötig ohne Dokument verboten | Importkontrolle 762 | |
| Ukraine UA | 24-06-2026 | Dokument nötig ohne Dokument verboten | Importkontrolle 760 |
Erklärung der Handelsbeschränkungen
Erga Omnes bedeutet "für alle".
Drittländer sind Länder, die nicht der EU angehören.
GSP bedeutet "Generalised System of Preferences".
GSP Plus bedeutet "Generalised System of Preferences Plus".
European Economic Area (EEA) bedeutet alle EU-Mitgliedstaaten und Island, Liechtenstein und Norwegen.
OCTs steht für "Overseas Countries and Territories". Es sind Länder und Gebiete, die nicht der EU angehören. Mehr Informationen
CARIFORUM ist eine regionale Wirtschaftsintegrationsorganisation, die 15 Mitgliedstaaten der Karibischen Gemeinschaft (CARICOM) und die Dominikanische Republik umfasst.
SADC EPA steht für "Southern African Development Community - Economic Partnership Agreement".
Zoll bedeutet "Zollabgaben".
Einfuhrkosten für 3901908010 schätzen
- Zollwert 1.000,00 €
- Zoll 6,5 % 65,00 €
- Einfuhrumsatzsteuer 19 % 202,35 €
- Summe 1.267,35 €
Kann unter Bedingungen niedriger sein:
- Autonomous suspension under end-use: 0 %
Dokumente und Kontrollen für Vereinigte Staaten
Nur eine Schätzung. Der Zollwert ist der Preis einschließlich Transport und Versicherung bis zur EU-Grenze. Verbrauchsteuern, andere Gebühren und herstellerbezogene Antidumpingzölle sind nicht berücksichtigt. Präferenzsätze gelten nur mit gültigem Ursprungsnachweis. Länderzugehörigkeit und Ausnahmen: TARIC, Stand November 2026.
Ausfuhrmaßnahmen für 3901908010
Was gilt, wenn diese Waren die EU verlassen: Ausfuhrkontrollen, Dual-Use- und andere Genehmigungen, Verbote je Bestimmungsland und die besondere Maßeinheit der Ausfuhranmeldung.
| Bestimmungsland | Start | Zoll / Steuer | Rechtsgrundlage Maßnahmetyp | |
|---|---|---|---|---|
1008 | All third countries 1008 | 12-03-2025 | Dokument nötig ohne Dokument verboten | Export control of fluorinated greenhouse gases 765 |
| Belarus BY | 20-07-2025 | Dokument nötig ohne Dokument verboten | Export control 766 | |
1008 | All third countries 1008 | 21-05-2026 | Dokument nötig ohne Dokument verboten | Export control - Waste 751 |
| Russian Federation RU | 22-10-2025 | Dokument nötig ohne Dokument verboten | Export control 709 |
Geschichte
Zollsätze und Maßnahmen für diesen Code im Zeitverlauf (Jahresstände).
Präferenzursprungsregeln für 3901908010
Was eine Ware erfüllen muss, um als Ursprungsware eines Partnerlandes zu gelten und den Präferenzzoll zu erhalten, je Abkommen. Wortlaut der Abkommen auf Englisch.
EU-Egypt Association Agreement · Ägypten
EU-Morocco Association Agreement · Marokko
Plastics in primary forms, waste, parings and scrap, of plastic; except for headings ex3907 and 3912 for which the rules are set out below:
– Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [13] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
– Other / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [14] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
Autonomous Trade Preferences (Western Balkans) · Kosovo
Plastics in primary forms, waste, parings and scrap, of plastic; except for headings ex39 07 and 3912 for which the rules are set out below:
- Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [13] / or: Manufacture in which the value of al the materials used does not exceed 25 % of the ex-works price of the product
- Other / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [14] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
EU-Canada CETA · Kanada
A change from any other heading; or A change from within any one of these headings, whether or not there is also a change from any other heading, provided that the value of non-originating materials classified in the same heading as the final product does not exceed 50 per cent of the transaction value or ex-works price of the product; or A change from within any one of these headings, whether or not there is also a change from any other heading, provided that the net weight of non-originating material classified in the same heading as the final product does not exceed 50 per cent of the net weight of the product.
EU-Chile Association Agreement · Chile
Plastics in primary forms, waste, parings and scrap, of plastic; except for headings ex39 07 and 3912 for which the rules are set out below: — Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [13] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product — Other / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [14] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
EU-Colombia/Peru/Ecuador Trade Agreement · Ecuador, Kolumbien, Peru
Plastics and articles thereof / or: Manufacture from materials of any heading, except that of the product / or: Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product
EU-Algeria Association Agreement · Algerien
Plastics in primary forms, waste, parings and scrap, of plastic; except for headings ex3907 and 3912 for which the rules are set out below:
– Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product,
and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [13] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [14] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
Generalised Scheme of Preferences (GSP, GSP+, EBA) · Armenien, Indien, Kenia, Pakistan, Salomonen, Samoa, Syrien, Vietnam
Plastics and articles thereof; except for: / or: (a) LDCs Manufacture from materials of any heading, except that of the product. or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product / or: (b) Other beneficiary countries Manufacture from materials of any heading, except that of the product. or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
EU-Jordan Association Agreement · Jordanien
Plastics in primary forms, waste, parings and scrap, of plastic; except for headings ex 3907 and 3912 for which the rules are set out below: - Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [13] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product - Other / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [14] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product - Copolymer, made from polycarbonate and acrylonitrile-butadiene-styrene copolymer (ABS) / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product [15] - Polyester / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product and/or manufacture from polycarbonate of tetrabromo-(bisphenol A)
EU-Japan EPA · Japan
CTSH; A chemical reaction is undergone; MaxNOM 50 % (EXW); or RVC 55 % (FOB).
EU-Korea FTA · Südkorea
Plastics in primary forms, waste, parings and scrap, of plastic; semi-manufactures and articles of plastics / or: Manufacture from materials of any heading, except that of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
EU-Lebanon Association Agreement · Libanon
Plastics in primary forms, waste, parings and scrap, of plastic; except for headings ex3907 and 3912 for which the rules are set out below:
– Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [13] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
– Other / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [14] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
EU-Mexico Global Agreement · Mexiko
Polymers of ethylene, in primary forms: — Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product; the value of any materials of Chapter 39 used does not exceed 20 % of the ex-works price fo the product [15] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product — Other / or: Manufacture in which all the materials used are classified within a Chapter other than Chapter 39. However, materials classified within Chapter 39 may be used, provided their value does not exceed 20 % of the ex-works price of the product [16] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
EU-Palestine Interim Association Agreement · Palästina
Plastics in primary forms, waste, parings and scrap, of plastic; except for heading Nos ex 3907 and 3912 for which the rules are set out below: - Addition homopolymerization products in which a single monomer contributes more than 99% by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50% of the ex-works price of the product; the value of any materials of Chapter 39 used does not exceed 20% of the ex-works price of the product [1] / or: Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product - Other / or: Manufacture in which the value of the materials of Chapter 39 used does not exceed 20% of the ex-works price of the product 1 / or: Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product
EU-Singapore FTA · Singapur
Plastics and articles thereof: except for: / or: Manufacture from materials of any heading, except that of the product. However materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-work price of the product or Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
EU-Tunisia Association Agreement · Tunesien
Plastics in primary forms, waste, parings and scrap, of plastic; except for headings ex 3907 and 3912 for which the rules are set out below: Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [13] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [14] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
Quelle: Europäische Kommission, Access2Markets (CC BY 4.0, gekürzt). Maßgeblich ist der Text des Abkommens. Access2Markets
Anmerkungen und Erläuterungen zu 3901908010
3901 90 80 Erläuterungen zur Kombinierten Nomenklatur: und 3901 90 80
andere In Anwendung der Anmerkung 4 und der Unterpositions-Anmerkung 1 zu Kapitel 39 gehören hierher: 1. Copolymere des Ethylens und anderer Monomere (ausgenommen Vinylacetat) (z. B. Copolymere aus Ethylen und Propylen), sowie Gemische von Polymeren analoger Zusammensetzung, bei denen das Ethylenmonomer vorherrscht; 2. chemisch modifiziertes Polyethylen im Sinne der Anmerkung 5 zu Kapitel 39 (z. B. Poly(ethylenchlorid) und Poly(ethylenchlorosulfid)).
Anmerkungen zu Kapitel 39
Anmerkungen 1. Als „Kunststoffe“ gelten in der Nomenklatur die Stoffe der Positionen 3901 bis 3914, die im Zeitpunkt der Polymerisation oder in einem späteren Stadium unter einer äußeren Einwirkung (im Allgemeinen Wärme und Druck, falls erforderlich auch unter Zuhilfenahme von Lösemitteln oder Weichmachern) durch Gießen, Pressen, Strangpressen, Walzen oder ein anderes Verfahren eine Form erhalten können oder erhalten haben, die auch nach Beendigung der äußeren Einwirkung erhalten bleibt. Der Begriff „Kunststoffe“ umfasst in der Nomenklatur auch Vulkanfiber. Dagegen ist dieser Begriff nicht anwendbar auf Stoffe, die als Spinnstoffe des Abschnitts XI gelten. 2. Zu Kapitel 39 gehören nicht: a) zubereitete Schmiermittel der Position 2710 oder 3403; b) Wachse der Position 2712 oder 3404; c) isolierte chemisch einheitliche organische Verbindungen (Kapitel 29); d) Heparin oder seine Salze (Position 3001); e) Lösungen von Erzeugnissen der Positionen 3901 bis 3913 (ausgenommen Kollodium) in flüchtigen organischen Lösemitteln, wenn der Anteil des Lösemittels 50 GHT der Lösung übersteigt (Position 3208); Prägefolien der Position 3212; f) organische grenzflächenaktive Stoffe oder Zubereitungen der Position 3402; g) Schmelzharze und Harzester (Position 3806); h) zubereitete Additives für Mineralöle (einschließlich Kraftstoffe) oder für andere, zu denselben Zwecken wie Mineralöle verwendete Flüssigkeiten (Position 3811); ij) zubereitete hydraulische Flüssigkeiten auf der Grundlage von Polyglykolen, Siliconen oder anderen Polymeren des Kapitels 39 (Position 3819); k) Diagnostik- oder Laborreagenzien auf einem Träger aus Kunststoffen (Position 3822); l) synthetischer Kautschuk im Sinne des Kapitels 40 und Waren daraus; m) Sattlerwaren (Position 4201), Koffer, Handtaschen oder andere Behältnisse der Position 4202; n) Flechtwaren und Korbmacherwaren des Kapitels 46; o) Wandverkleidungen der Position 4814; p) Erzeugnisse des Abschnitts XI (Spinnstoffe und Waren daraus); q) Waren des Abschnitts XII (z. B. Schuhe und Schuhteile, Kopfbedeckungen und Teile davon, Regenschirme, Sonnenschirme, Spazierstöcke, Peitschen, Reitpeitschen und Teile davon); r) Fantasieschmuck der Position 7117; s) Waren des Abschnitts XVI (Maschinen und Apparate, elektrotechnische Waren); t) Teile von Beförderungsmitteln des Abschnitts XVII; u) Waren des Kapitels 90 (z. B. optische Elemente, Brillenfassungen, Zeicheninstrumente); v) Waren des Kapitels 91 (z. B. Gehäuse für Uhren und andere Uhrmacherwaren); w) Waren des Kapitels 92 (z. B. Musikinstrumente und Teile davon); x) Waren des Kapitels 94 (z. B. Möbel, Leuchten und Beleuchtungskörper, Reklameleuchten, vorgefertigte Gebäude); y) Waren des Kapitels 95 (z. B. Spielzeug, Spiele, Sportgeräte); z) Waren des Kapitels 96 (z. B. Bürsten, Knöpfe, Reißverschlüsse, Kämme, Mundstücke und Rohre für Tabakpfeifen, Zigarettenspitzen oder dergleichen, Teile von Isolierflaschen, Kugelschreiber, Füllhalter, Drehbleistifte und Ein-, Zwei-, Dreibeinstative und ähnliche Waren). 3. Zu den Positionen 3901 bis 3911 gehören nur durch chemische Synthese hergestellte Erzeugnisse der folgenden Kategorien: a) flüssige synthetische Polyolefine, bei deren Destillation weniger als 60 RHT bis 300 °C übergehen, nach Umrechnung auf 1 013 mbar, wenn eine Vakuumdestillation durchgeführt wird (Positionen 3901 und 3902); b) niedrig polymerisierte Harze vom Cumaron-Inden-Typ (Position 3911); c) andere synthetische Polymere aus durchschnittlich fünf oder mehr monomeren Einheiten; d) Silicone (Position 3910); e) Resole (Position 3909) und andere Prepolymere. 4. Als „Copolymere“ gelten alle Polymere, bei denen keine einzelne Monomereinheit 95 GHT oder mehr zum Gesamtpolymergehalt beiträgt. Im Sinne des Kapitels 39 sind, wenn nichts anderes bestimmt ist, Copolymere (einschließlich Copolykondensate, Copolyadditionserzeugnisse, Blockcopolymere und Pfropfcopolymere) und Polymergemische der Position zuzuweisen, welche die Polymere derjenigen Comonomereinheit erfasst, die gewichtsmäßig gegenüber jeder anderen einzelnen Comonomereinheit überwiegt. Im Sinne dieser Anmerkung sind dabei die konstitutionellen Comonomereinheiten von Polymeren, die zur selben Position gehören, zusammenzuziehen. Wenn keine einzelne Comonomereinheit überwiegt, sind Copolymere oder Polymergemische der Letzten der in Betracht kommenden Position zuzuweisen. 5. Chemisch modifizierte Polymere — das sind solche, bei denen nur an den Seitengruppen der Hauptpolymerkette Änderungen durch chemische Reaktionen vorgenommen wurden — sind derjenigen Position zuzuweisen, die das nicht modifizierte Polymer erfasst. Diese Bestimmung gilt nicht für Pfropfcopolymere. 6. Als „Primärformen“ im Sinne der Positionen 3901 bis 3914 gelten nur folgende Formen: a) Flüssigkeiten und Pasten, einschließlich Dispersionen (Emulsionen und Suspensionen) und Lösungen; b) Blöcke von unregelmäßiger Form, Brocken, Krümel, Pulver (einschließlich Formmassen), Granulate, Flocken und ähnliche lose Formen. 7. Zu Position 3915 gehören nicht Abfälle, Schnitzel und Bruch eines einzelnen thermoplastischen Stoffes, die in Primärformen umgewandelt wurden (Positionen 3901 bis 3914). 8. Als „Rohre und Schläuche“ im Sinne der Position 3917 gelten Hohlprodukte, die Halb- oder Fertigerzeugnisse sind (z. B. gerippte Gartenschläuche, perforierte Rohre), wie sie üblicherweise zum Leiten, Befördern und Verteilen von Gasen oder Flüssigkeiten dienen. Diese Bezeichnungen erfassen auch schlauchförmige Wursthüllen und andere flachliegende Rohre und Schläuche. Mit Ausnahme der letztgenannten Erzeugnisse gelten jedoch solche mit einem anderen als runden, ovalen, rechteckigen (mit einer Länge von nicht mehr als dem 1,5fachen der Breite) oder ein regelmäßiges Vieleck aufweisenden Innenquerschnitt als Profile und nicht als Rohre oder Schläuche. 9. Als „Wand- oder Deckenverkleidungen aus Kunststoffen“ im Sinne der Position 3918 gelten zur Verschönerung von Wänden oder Decken geeignete Erzeugnisse in Rollen mit einer Breite von 45 cm oder mehr, die aus dauerhaft auf einem Träger aus anderen Stoffen als Papier befestigtem Kunststoff bestehen und deren Kunststoffschicht (auf der Schauseite) gemasert, geprägt, farbig gemustert, mit Motiven bedruckt oder anders verziert ist. 10. Als „Tafeln, Platten, Folien, Filme, Bänder und Streifen“ im Sinne der Positionen 3920 und 3921 gelten ausschließlich Tafeln, Platten, Folien, Filme, Bänder und Streifen (ausgenommen solche des Kapitels 54) und Blöcke von regelmäßiger geometrischer Form, auch bedruckt oder anders oberflächenbearbeitet, nicht geschnitten oder lediglich rechteckig oder quadratisch geschnitten (auch wenn sie dadurch den Charakter von Fertigwaren erhalten haben), aber nicht weiter bearbeitet. 11. Zu Position 3925 gehören nur die nachstehend aufgeführten Waren, soweit sie nicht in vorhergehenden Positionen des Teilkapitels II erfasst sind: a) Sammelbehälter, Tanks (einschließlich Klärtanks), Bottiche und ähnliche Behälter, mit einem Fassungsvermögen von mehr als 300 l; b) Bauelemente, wie sie z. B. zum Herstellen von Fußböden, Mauern, Trennwänden, Decken und Bedachungen verwendet werden; c) Regenrinnen und deren Zubehör; d) Türen, Fenster und deren Rahmen, Verkleidungen und Schwellen; e) Geländer, Zäune und ähnliche Absperrungen; f) Fensterläden, Jalousien (einschließlich Jalousetten) und ähnliche Waren, und deren Teile und Zubehör; g) große Regale, zur Montage und zum festen Einbau z. B. in Läden, Werkstätten oder Lagerräumen bestimmt; h) architektonische Ornamente, z. B. Kannelierungen, Gewölbe, Friese; ij) Beschläge und ähnliche Waren zur bleibenden Befestigung an Türen, Fenstern, Treppen, Wänden oder anderen Gebäudeteilen, z. B. Knöpfe, Griffe, Haken, Konsolen, Handtuchhalter, Schalterplatten und andere Abdeckplatten. Unterpositions-Anmerkungen 1. Innerhalb einer Position dieses Kapitels sind Polymere (einschließlich Copolymere) und chemisch modifizierte Polymere gemäß den folgenden Regeln einzureihen: a) Besteht eine Unterposition „andere“ in derselben Gliederungsstufe von Unterpositionen, gilt Folgendes: 1) Die dem Namen eines spezifischen Polymers in der Warenbezeichnung einer Unterposition angefügte Vorsilbe „Poly“ (z. B. Polyethylen oder Polyamid-6,6) bedeutet, dass die konstitutionelle Monomereinheit oder konstitutionellen Monomereinheiten des namentlich genannten Polymers zusammengenommen 95 GHT oder mehr zum Gesamtpolymergehalt beitragen müssen. 2) Die in den Unterpositionen 3901 30, 3901 40, 3903 20, 3903 30 und 3904 30 genannten Copolymere sind diesen Unterpositionen zuzuweisen, wenn die Comonomereinheiten der genannten Copolymere 95 GHT oder mehr zum Gesamtpolymergehalt beitragen. 3) Chemisch modifizierte Polymere sind in die Unterposition „andere“ einzureihen, vorausgesetzt, dass diese chemisch modifizierten Polymere nicht in einer anderen Unterposition genauer erfasst sind. 4) Polymere, die nicht die in den vorstehenden Absätzen 1), 2) oder 3) vorgegebene Beschaffenheit aufweisen, sind innerhalb derselben Gliederungsstufe von Unterpositionen in jene Unterposition einzureihen, die Polymere derjenigen Monomereinheit erfasst, die gewichtsmäßig gegenüber jeder anderen einzelnen Comonomereinheit überwiegt. Dabei sind konstitutionelle Monomereinheiten von Polymeren, die in dieselbe Unterposition fallen, zusammenzuziehen. Nur die konstitutionellen Comonomereinheiten von Polymeren derselben Gliederungsstufe von Unterpositionen sind miteinander zu vergleichen. b) Besteht keine Unterposition „andere“ in derselben Gliederungsstufe von Unterpositionen, so gilt Folgendes: 1) Polymere sind der Unterposition zuzuweisen, die Polymere derjenigen Monomereinheit erfasst, die gewichtsmäßig gegenüber jeder anderen einzelnen Comonomereinheit überwiegt. Dabei sind konstitutionelle Monomereinheiten von Polymeren, die in dieselbe Unterposition fallen, zusammenzuziehen. Nur die konstitutionellen Comonomereinheiten von Polymeren derselben Gliederungsstufe sind miteinander zu vergleichen. 2) Chemisch modifizierte Polymere sind der für das nicht modifizierte Polymer zutreffenden Unterposition zuzuweisen. Polymergemische sind derselben Unterposition zuzuweisen wie die aus denselben Monomereinheiten im selben Mengenverhältnis erhaltenen Polymere. 2. Im Sinne der Unterposition 3920 43 schließt der Begriff „Weichmacher“ auch die Sekundärweichmacher ein. Zusätzliche Anmerkung 1. In das Kapitel 39 gehören mit Zellkunststoff getränkte, bestrichene oder überzogene Fingerhandschuhe, Handschuhe ohne Fingerspitzen und Fausthandschuhe unabhängig davon, — ob sie aus mit Zellkunststoff getränkten, bestrichenen oder überzogenen Geweben, Gewirken, Gestricken (anderen als solchen der Position 5903), Filzen oder Vliesstoffen konfektioniert sind oder — aus nicht getränkten, bestrichenen oder überzogenen Geweben, Gewirken, Gestricken, Filzen oder Vliesstoffen konfektioniert und anschließend mit Zellkunststoff getränkt, bestrichen oder überzogen worden sind, sofern diese Gewebe, Gewirke, Gestricke, Filze oder Vliesstoffe nur der Verstärkung dienen (Anmerkung 3 c) zu Kapitel 56 und Anmerkung 2 a) Ziffer 5) zu Kapitel 59).
Anmerkungen zu Abschnitt VII
KUNSTSTOFFE UND WAREN DARAUS; KAUTSCHUK UND WAREN DARAUS Anmerkungen 1. Warenzusammenstellungen, die aus zwei oder mehreren voneinander getrennten Bestandteilen bestehen, von denen einige oder alle zu diesem Abschnitt gehören, und die erkennbar dazu bestimmt sind, durch Vermischen ein Erzeugnis des Abschnitts VI oder VII herzustellen, sind der für dieses Erzeugnis zutreffenden Position zuzuweisen unter der Voraussetzung, dass die Einzelbestandteile: a) ohne weiteres Umpacken aufgrund ihrer Aufmachung eindeutig erkennbar dazu bestimmt sind, zusammen verwendet zu werden, b) zusammen gestellt werden und c) entweder aufgrund ihrer Beschaffenheit oder ihrer entsprechenden Mengen als einander ergänzend erkennbar sind. 2. Mit Ausnahme der Waren der Position 3918 oder 3919 sind Kunststoffe, Kautschuk und Waren daraus, mit Motiven, Buchstaben oder bildlichen Darstellungen bedruckt, die im Hinblick auf den eigentlichen (ursprünglichen) Gebrauch der Waren nicht nur nebensächlich sind, dem Kapitel 49 zuzuweisen.
Weitere Erläuterungen zum Kapitel
Allgemeines Die Erläuterungen zu Kapitel 39 des HS, Allgemeines, ‚Kunststoffe in Verbindung mit anderen als textilen Stoffen‘, Buchstabe d, gelten sinngemäß für Kohlenstofffasern in Verbindung mit Kunststoffen.
Anmerkung 4: Berechnung der Massenverhältnisse von Monomereinheiten in Copolymeren: Die Massenverhältnisse der einzelnen Monomereinheiten in Copolymerketten werden auf der Grundlage der Molekularstruktur des Copolymers (nicht der Ausgangsstoffe) unter Berücksichtigung der Bildungsreaktion des Polymers berechnet. Soweit zutreffend, wird das Atom, das zwei benachbarte Monomereinheiten miteinander verbindet, der Monomereinheit zugeordnet, aus der das Atom stammt. Die folgenden Beispiele veranschaulichen die Berechnung des Monomereinheitsgehalts in Copolymeren: — In Polyethylenterephthalat, einem Polyester aus Teraphthalsäure und Ethylenglykolanteil-Einheiten, werden beide Sauerstoffatome der Glykolmonomereinheit zugeordnet. Ethylenglycol wird daher als C2H4O2 und Terephthalat als C8H4O2 berechnet. — In Polyamid-6,6, einem Polyamid aus Hexamethylendiamin und Adipinsäure, werden beide Stickstoffatome der Diamin-Monomereinheit zugeordnet. Hexamethylendiamin wird daher als C6H14N2 und Adipinsäure als C6H8O2 berechnet.
Anmerkung 6 Die in dieser Anmerkung und in Anmerkung 4 zu Kapitel 32 verwendete Bezeichnung „Lösungen“ umfasst nicht kolloide Lösungen.
Quellen: Kombinierte Nomenklatur 2026, Anhang I der Verordnung (EWG) Nr. 2658/87 (CELEX 32025R1926), und die Erläuterungen zur Kombinierten Nomenklatur (CELEX 02019XC0329(02)-20260213). Die Abschnitts- und Kapitelanmerkungen sind rechtsverbindlich, die Erläuterungen sind Auslegungshilfen. EUR-Lex
Britische verbindliche Zolltarifauskünfte zu 3901908010
Auskünfte von HM Revenue & Customs für Waren, deren britischer Warencode so beginnt wie dieser EU-Code. Der britische Zolltarif weicht vom EU-Tarif ab, für die EU sind sie daher nur eine Orientierung.
- UK 3901908099 Gültig vom 01.05.2025 bis 30.04.2028 · Auskunft 600012465 auf GOV.UK
linear medium density polyethylene Physical form: pellets
Begründung
Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 3901 - Polymers of ethylene, in primary forms GIR 6 has been used to classify the goods to subheading level 390190 - Other than elsewhere specified 8 digit code 39019080 - Other than Ionomer resin consisting of a salt of a terpolymer of ethylene with isobutyl acrylate and methacrylic acid; A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight 35% or less of styrene, in one of the forms mentioned in note 6(b) to this chapter 10 digit code 3901908099 - Other than elsewhere specified Also classified in …
Quelle: HM Revenue & Customs, Advance Tariff Rulings. Enthält Informationen des öffentlichen Sektors unter der Open Government Licence v3.0.
Beschränkungen und Hinweise für 3901908010
- Russland-Sanktionen: Einfuhrverbot Verordnung (EU) Nr. 833/2014, Anhang XXI 3901
Art. 3i, Güter, die Russland erhebliche Einnahmen verschaffen
Rechtsakt auf EUR-Lex lesen - Russland-Sanktionen: Ausfuhrverbot Verordnung (EU) Nr. 833/2014, Anhang XXIII 3901
Art. 3k, Güter, die zur Stärkung der industriellen Kapazitäten Russlands beitragen könnten
Rechtsakt auf EUR-Lex lesen
Nur zur Orientierung. Prüfen Sie den Rechtsakt, bevor Sie sich auf einen Hinweis verlassen; Schwellenwerte, Ausnahmen und Genehmigungen sind nicht vollständig abgebildet.
EU-Handel 2025 für 3901908010
- Einfuhren aus Drittländern
- 437,5 Mio. €
- 227.760 t
- Ausfuhren in Drittländer
- 658,5 Mio. €
Wichtigste Ursprungsländer nach Einfuhrwert
Vereinigte Staaten 126,3 Mio. €
Vereinigtes Königreich 112 Mio. €
Israel 55,9 Mio. €
China 51,9 Mio. €
Japan 29 Mio. €
Werte für den KN8-Code 39019080. Quelle: Eurostat, Comext, CC BY 4.0, aufbereitet von hscode.info. Vertraulicher Handel ist keinen Codes zugeordnet.
Tarifänderungen für 3901908010 seit 2016
- Jan. 2017 3901908010 Code eingeführt
Monatlicher Vergleich der TARIC-Auszüge der Europäischen Kommission. Ohne saisonale Einfuhrpreise.
Einfuhrzoll im Vereinigten Königreich für 390190
- 0%
- 6%
Drittlandszollsätze aller britischen Warencodes unter dieser HS-Unterposition. Quelle: UK Department for Business and Trade, Stand 02.11.2026. Der britische Tarif weicht vom EU-Tarif ab.
Einfuhrumsatzsteuer in der EU
- Belgien 21 %
- Bulgarien 20 %
- Dänemark 25 %
- Deutschland 19 %
- Estland 24 % ggf. 9 %
- Finnland 25,5 %
- Frankreich 20 %
- Griechenland 24 %
- Irland 23 %
- Italien 22 %
- Kroatien 25 %
- Lettland 21 %
- Litauen 21 %
- Luxemburg 17 %
- Malta 18 %
- Niederlande 21 %
- Österreich 20 %
- Polen 23 %
- Portugal 23 %
- Rumänien 21 %
- Schweden 25 %
- Slowakei 23 %
- Slowenien 22 %
- Spanien 21 %
- Tschechien 21 %
- Ungarn 27 %
- Zypern 19 %
Normalsatz je Mitgliedstaat auf Zollwert, Zoll und Transportkosten bis zum Bestimmungsort. Ermäßigte Sätze hängen oft von Verwendung oder Abnehmer ab und gelten nur, wenn das Land sie für die Ware vorsieht. Quelle: Europäische Kommission, Taxes in Europe Database, Stand 02.11.2026.
Ursprungsregeln
Die Präferenzursprungsregeln für die Unterposition 390190 hängen vom Handelsabkommen ab. Die Kommission veröffentlicht sie in Access2Markets.
Ursprungsregeln bei Access2MarketsInformationen
Wenn Sie "zum Befüllen der Hohlräume, für bestimmte Luftfahrzeuge" importieren oder exportieren, ist es wichtig, den richtigen HS-Code oder TARIC-Code zu haben. Der HS-Code 3901908010 80 ist der Standardcode für dieses Produkt und stellt sicher, dass die richtigen Zölle und Abgaben bei einer Überquerung internationaler Grenzen angewendet werden.
Um sicherzustellen, dass Ihre Geschäftsabwicklung bei der Einfuhr oder Ausfuhr von "zum Befüllen der Hohlräume, für bestimmte Luftfahrzeuge" reibungslos verläuft, sollten Sie folgende Punkte beachten:
- Informieren Sie sich über die spezifischen Einfuhr- und Ausfuhrbestimmungen in den beteiligten Ländern. Dazu gehören mögliche Beschränkungen, Steuern und Zölle, die auf "zum Befüllen der Hohlräume, für bestimmte Luftfahrzeuge" anwendbar sind.
- Prüfen Sie, ob zusätzliche Lizenzen, Genehmigungen oder Zertifikate erforderlich sind, um "zum Befüllen der Hohlräume, für bestimmte Luftfahrzeuge" in das Zielland zu importieren oder aus dem Herkunftsland zu exportieren.
- Achten Sie darauf, dass Ihre Handelspartner über gültige Identifikationsnummern verfügen, wie zum Beispiel die EORI-Nummer (Economic Operators Registration and Identification) in der EU, um den Handel effizienter zu gestalten und Verzögerungen zu minimieren.
- Stellen Sie sicher, dass alle handels- und zollrelevanten Dokumente (wie Handelsrechnungen, Packlisten, Ursprungszertifikate und Versicherungspolicen) korrekt ausgefüllt sind und den jeweiligen nationalen Vorschriften entsprechen.
- Behalten Sie die aktuellen Wechselkurse sowie die Kosten für Verpackung, Versand und Versicherung im Blick, um eine genaue Kalkulation der Handelskosten durchzuführen.
Zusammenfassend lautet der HS-Code oder TARIC-Code für "zum Befüllen der Hohlräume, für bestimmte Luftfahrzeuge" 3901908010 80. Stellen Sie sicher, dass Sie diesen Code in all Ihren Handels- und Zolldokumenten korrekt verwenden, um eine reibungslose und problemlose Transaktion zu gewährleisten. Mit diesen Tipps sind Sie besser auf die Herausforderungen im internationalen Handel vorbereitet und können erfolgreich "zum Befüllen der Hohlräume, für bestimmte Luftfahrzeuge" importieren und exportieren.
HS-Code Struktur
1. HS Kapitel
Es gibt 21 unterschiedliche Abschnitte, die in 96 Kapitel unterteilt sind. Ausnahmekapitel beinhalten Kapitel 77, welches für zukünftige Nutzung reserviert ist, Kapitel 98 und 99, die auf nationaler Ebene begrenzt sind, und Kapitel 99, welches ein spezifischer Code für temporäre Änderungen ist. Im obigen Beispiel wurde Kapitel 39 ausgewählt, für kunststoffe und waren daraus
2. HS Position
Die Überschrift bestimmt die spezifische Kategorie innerhalb eines bestimmten Kapitels. Im obigen Beispiel bezieht sich die 01 auf I. PRIMÄRFORMEN.
3. HS Unterposition
Die letzten beiden Ziffern des internationalen Harmonisierten Codes sind spezifischer und definieren Unterkategorien von Produkten. Im obigen Beispiel bezieht sich die 90 auf zum Befüllen der Hohlräume, für bestimmte Luftfahrzeuge.
HS-Code Baumstruktur
3900000000 80
HS Kapitel KUNSTSTOFFE UND WAREN DARAUS
3901000000 10
I. PRIMÄRFORMEN
3901000000 80
Polymere des Ethylens, in Primärformen
3901100000 80
- Polyethylen mit einer relativen Dichte von weniger als 0,94
3901101000 80
- - lineares Polyethylen
3901101020 80
- - - Leichtfließendes, lineares Polyethylen-1-buten niedriger Dichte (LLDPE) (CAS RN 25087-34-7) in Pulverform mit -einer Schmelzflussrate (MFR 190 °C / 2,16 kg) von 16 g / 10 min oder mehr, jedoch nicht mehr als 24 g / 10 min, -einer Dichte (ASTM D 1505) von 0,922 g/cm³ oder mehr, jedoch nicht mehr als 0,926 g/cm³ und -einer Vicat-Erweichungstemperatur von mindestens 94 °C
3901101050 80
- - - Copolymer aus Ethylen und 1-Buten (CAS RN 25087-34-7) mit -einer Dichte (ASTM D 1505) von 0,924 g/cm³ oder mehr, jedoch nicht mehr als 0,928 g/cm³, -einer Schmelzflussrate (190 °C/2,16 kg) von 48 g/10 min oder mehr, jedoch nicht mehr als 52 g/10 min und -einer Spitzenschmelztemperatur von 120 °C oder mehr, jedoch nicht mehr als 124 °C
3901101060 80
- - - Copolymer aus Ethylen und 1-Buten (CAS RN 25087-34-7) mit -einer Dichte (ASTM D 1505) von 0,922 g/cm³ oder mehr, jedoch nicht mehr als 0,926 g/cm³ und -einer Schmelzflussrate (190 °C/2,16 kg) von 18 g/10 min oder mehr, jedoch nicht mehr als 22 g/10 min
3901101090 80
- - - anderes
3901109000 80
- - anderes
3901109030 80
- - - Polyethylengranulat mit einem Kupfergehalt von 10GHT oder mehr, jedoch nicht mehr als 25GHT
3901109090 80
- - - anderes
3901200000 80
- Polyethylen mit einer relativen Dichte von 0,94 oder mehr
3901201000 80
- - Polyethylen in Formen im Sinne der Anmerkung 6 b) zu diesem Kapitel, mit einer relativen Dichte von 0,958 oder mehr bei 23 °C und einem Gehalt an: - Aluminium von 50 mg/kg oder weniger, - Calcium von 2 mg/kg oder weniger, - Chrom von 2 mg/kg oder weniger, - Eisen von 2 mg/kg oder weniger, - Nickel von 2 mg/kg oder weniger, - Titan von 2 mg/kg oder weniger, und - Vanadium von 8 mg/kg oder weniger, zum Herstellen von chlorsulfoniertem Polyethylen
3901209000 80
- - anderes
3901300000 80
- Ethylen-Vinylacetat-Copolymere
3901300010 80
- - zum Befüllen der Hohlräume, für bestimmte Luftfahrzeuge
3901300020 80
- - Copolymer aus Ethylen und Vinylacetat (CAS RN 24937-78-8) mit -einem Gehalt an Vinylacetat von 28 GHT oder mehr, jedoch nicht mehr als 49 GHT, -einem Schmelzindex von weniger als 5 g/10 min (190 °C/2,16 kg, nach ASTM D1238) -in Form von Pellets
3901300030 80
- - Terpolymer aus Ethylen, Vinylacetat und Methacrylsäure (CAS RN 26375-31-5)
3901300099 80
- - andere
3901400000 80
- Ethylen-alpha-Olefin-Copolymere mit einer relativen Dichte von weniger als 0,94
3901400010 80
- - Leichtfließendes, lineares Polyethylen-1-buten niedriger Dichte (LLDPE) (CAS RN 25087-34-7) in Pulverform mit -einer Schmelzflussrate (MFR 190 °C / 2,16 kg) von 16 g / 10 min oder mehr, jedoch nicht mehr als 24 g / 10 min, -einer Dichte (ASTM D 1505) von 0,922 g/cm³ oder mehr, jedoch nicht mehr als 0,926 g/cm³ und -einer Vicat-Erweichungstemperatur von mindestens 94 °C
3901400030 80
- - Lineares Polyethylen niedriger Dichte (LLDPE) aus Octen, im Ziegler-Natta-Verfahren hergestellt, in der Form von Pellets mit - einem Copolymergehalt von mehr als 10 GHT, jedoch nicht mehr als 20 GHT - einer Schmelzflussrate (MFR 190°C/2,16 kg) von 0,7 g/10 min oder mehr, jedoch nicht mehr als 0,9 g/10 min und - einer Dichte (ASTM D4703) von 0,911 g/cm³ oder mehr, jedoch nicht mehr als 0,913 g/cm³ zur Verwendung bei der Herstellung von Folien für flexible Lebensmittelverpackungen im Coextrudierverfahren
3901400050 80
- - Copolymer aus Ethylen und 1-Buten (CAS RN 25087-34-7) mit -einer Dichte (ASTM D 1505) von 0,924 g/cm³ oder mehr, jedoch nicht mehr als 0,928 g/cm³, -einer Schmelzflussrate (190 °C/2,16 kg) von 48 g/10 min oder mehr, jedoch nicht mehr als 52 g/10 min und -einer Spitzenschmelztemperatur von 120 °C oder mehr, jedoch nicht mehr als 124 °C
3901400060 80
- - Copolymer aus Ethylen und 1-Buten (CAS RN 25087-34-7) mit -einer Dichte (ASTM D 1505) von 0,922 g/cm³ oder mehr, jedoch nicht mehr als 0,926 g/cm³ und -einer Schmelzflussrate (190 °C/2,16 kg) von 18 g/10 min oder mehr, jedoch nicht mehr als 22 g/10 min
3901400090 80
- - andere
3901900000 80
- andere
3901903000 80
- - ionomeres Harz, bestehend aus einem Salz eines Ethylen-Isobutylacrylat-Methacrylsäure-Copolymers; A-B-A-Blockcopolymer aus Polystyrol, Ethylen-Butylen-Copolymer und Polystyrol, mit einem Gehalt an Styrol von 35 GHT oder weniger, in Formen im Sinne der Anmerkung 6 b) zu diesem Kapitel
3901908000 80
- - andere
3901908010 80
- - - zum Befüllen der Hohlräume, für bestimmte Luftfahrzeuge
3901908053 10
- - - andere
3901908053 80
- - - - Copolymer aus Ethylen und Acrylsäure (CAS RN 9010-77-9) mit - einem Acrylsäuregehalt von 18,5 GHT oder mehr, jedoch nicht mehr als 49,5 GHT (ASTM-D4094), und - einer Schmelzflussrate von 10 g/10 min (MFR 125 °C/2,16 kg, ASTM-D1238) oder mehr
3901908055 80
- - - - Zink- oder Natriumsalz eines Ethylen- und Acrylsäure-Copolymers mit - einem Gehalt an Acrylsäure von 6 GHT oder mehr, jedoch nicht mehr als 50 GHT, und - einem Schmelzindex von 1 g/10 min oder mehr bei 190 °C/2,16 kg (ASTM D1238)
3901908067 80
- - - - Copolymer, ausschließlich aus Ethylen und Methacrylsäuremonomeren mit einem Gehalt an Methacrylsäure von 11 GHT oder mehr
3901908073 80
- - - - Mischung mit einem Gehalt von - 80 GHT oder mehr, jedoch nicht mehr als 94 GHT°chloriertes Polyethylen (CAS RN 64754-90-1) und - 6 GHT oder mehr, jedoch nicht mehr als 20 GHT Styrol-Acryl-Copolymer (CAS RN 27136-15-8)
3901908075 80
- - - - Terpolymer aus Ethylen, Isobutylacrylat und Methacrylsäure (CAS RN 37433-35-5), in Form von Pellets
3901908085 80
- - - - Terpolymer aus Ethylen, n-Butylacrylat und Kohlenmonoxid (CAS RN 61843-70-7), in Form von Pellets
3901908091 80
- - - - ionomeres Harz, bestehend aus einem Salz eines Ethylen-Methacrylsäure-Copolymers
3901908092 80
- - - - chlorsulfoniertes Polyethylen
3901908093 80
- - - - Ethylen-Vinylacetat-Kohlenmonoxid-Copolymer, zur Verwendung als Weichmacher beim Herstellen von Dachbahnen
3901908094 80
- - - - Mischung von A-B-Blockcopolymer aus Polystyrol und Ethylen-Butylen-Copolymer mit A-B-A-Blockcopolymer aus Polystyrol, Ethylen-Butylen-Copolymer und Polystyrol, mit einem Gehalt an Styrol von nicht mehr als 35 GHT
3901908097 80
- - - - chloriertes Polyethylen, in Form von Pulver
3901908099 80
- - - - andere