Import Handelsbeschränkungen für 3919908020 10
Diese Tabelle enthält Informationen zu den Handelsbeschränkungen für den Import von Waren in die EU und die EU in Drittländer. Die Tabelle enthält Informationen zu den Handelsbeschränkungen, die aufgrund von Zollunionen, Präferenzen, Tarifquoten, Zollunionen, Veterinärkontrollen, Drittländerzöllen und Nicht-Präferenz-Tarifquoten erhoben werden.
| Ursprungsland | Start | Zoll / Steuer | Rechtsgrundlage Maßnahmetyp | |
|---|---|---|---|---|
| EU-Switzerland agreement: re-imported goods 1007 | 01-01-2007 | 0 % | Tarifpräferenz 142 | |
| Bosnia and Herzegovina BA | 01-01-2009 | 0 % | Tarifpräferenz 142 | |
| North Macedonia MK | 01-01-2009 | 0 % | Tarifpräferenz 142 | |
| Ukraine UA | 01-01-2016 | 0 % | Tarifpräferenz 142 | |
2020 | GSP - General arrangements 2020 | 01-01-2023 | 0 % | Tarifpräferenz 142 |
| Singapore SG | 01-01-2027 | 0 % | Tarifpräferenz 142 | |
XS | Serbia XS | 01-02-2010 | 0 % | Tarifpräferenz 142 |
| Japan JP | 01-02-2020 | 0 % | Tarifpräferenz 142 | |
| Peru PE | 01-03-2013 | 0 % | Tarifpräferenz 142 | |
| Albania AL | 01-04-2009 | 0 % | Tarifpräferenz 142 | |
| Kosovo XK | 01-04-2016 | 0 % | Tarifpräferenz 142 | |
| Montenegro ME | 01-05-2010 | 0 % | Tarifpräferenz 142 | |
1011 | ERGA OMNES 1011 | 01-11-2018 | 0 % | Lufttüchtigkeit Tarifsperre 119 |
| Switzerland CH | 20-12-1972 | 0 % | Tarifpräferenz 142 | |
| Singapore SG | 21-11-2019 – 31-12-2026 | 0 % | Tarifpräferenz 142 | |
1011 | ERGA OMNES 1011 | 01-01-2017 | 0 % | Sperre - Waren für bestimmte Kategorien von Schiffen, Booten und anderen Schiffen und für Bohr- oder Produktionsplattformen 117 |
1011 | ERGA OMNES 1011 | 01-01-2017 | 6.5 % | Drittländer-Zoll 103 |
| New Zealand NZ | 01-05-2024 | 0 % | Tarifpräferenz 142 | |
5500 | Mercosur 5500 | 01-05-2026 – 31-12-2026 | 5.2 % | Tarifpräferenz 142 |
| Armenia AM | 10-10-2026 – 11-10-2028 | 0 % | Tarifpräferenz 142 | |
| Canada CA | 21-09-2017 | 0 % | Tarifpräferenz 142 | |
| EU-Canada agreement: re-imported goods 1006 | 21-09-2017 | 0 % | Tarifpräferenz 142 | |
1011 | ERGA OMNES 1011 | 01-01-2026 | 0 % | Autonome Tarifsperre 112 |
| Faroe Islands FO | 01-01-1997 | 0 % | Tarifpräferenz 142 | |
XL | Melilla XL | 01-01-1999 | 0 % | Zugangsakt0001/85 Tarifpräferenz 142 |
| Occupied palestinian Territory PS | 01-01-2001 | 0 % | Tarifpräferenz 142 | |
| Andorra AD | 01-01-2006 | 0 % | Zollunion-Zoll 106 | |
| San Marino SM | 01-01-2006 | 0 % | Zollunion-Zoll 106 | |
| Türkiye TR | 01-01-2006 | 0 % | Zollunion-Zoll 106 | |
2027 | GSP+ (incentive arrangement for sustainable development and good governance) 2027 | 01-01-2014 | 0 % | Tarifpräferenz 142 |
2005 | GSP-EBA (Special arrangement for the least-developed countries - Everything But Arms) 2005 | 01-01-2014 | 0 % | Tarifpräferenz 142 |
| Moldova, Republic of MD | 01-01-2016 | 0 % | Tarifpräferenz 142 | |
| Ecuador EC | 01-01-2017 | 0 % | Tarifpräferenz 142 | |
| United Kingdom GB | 01-01-2021 | 0 % | Tarifpräferenz 142 | |
2080 | OCTs (Overseas Countries and Territories) 2080 | 01-01-2021 | 0 % | Tarifpräferenz 142 |
| Ghana GH | 01-01-2027 | 0 % | Tarifpräferenz 142 | |
| Chile CL | 01-02-2025 | 0 % | Tarifpräferenz 142 | |
| Tunisia TN | 01-03-1998 | 0 % | Tarifpräferenz 142 | |
| Morocco MA | 01-03-2000 | 0 % | Tarifpräferenz 142 | |
| Lebanon LB | 01-04-2006 | 0 % | Tarifpräferenz 142 | |
| Jordan JO | 01-05-2002 | 0 % | Tarifpräferenz 142 | |
| Egypt EG | 01-06-2004 | 0 % | Tarifpräferenz 142 | |
XC | Ceuta XC | 01-07-1991 | 0 % | Zugangsakt0001/85 Tarifpräferenz 142 |
2012 | EEA - European Economic Area 2012 | 01-07-2007 | 0 % | Tarifpräferenz 142 |
| Korea, Republic of (South Korea) KR | 01-07-2014 | 0 % | Tarifpräferenz 142 | |
| Mexico MX | 01-07-2016 | 0 % | Tarifpräferenz 142 | |
| Kenya KE | 01-07-2024 | 0 % | Tarifpräferenz 142 | |
| United States US | 01-07-2026 | 0 % | Tarifpräferenz 142 | |
| Syria SY | 01-08-1994 | 0 % | Tarifpräferenz 142 | |
| Colombia CO | 01-08-2013 | 0 % | Tarifpräferenz 142 | |
2200 | Central America 2200 | 01-08-2013 | 0 % | Tarifpräferenz 142 |
| Viet Nam VN | 01-08-2020 | 0 % | Tarifpräferenz 142 | |
| Algeria DZ | 01-09-2005 | 0 % | Tarifpräferenz 142 | |
| Georgia GE | 01-09-2014 | 0 % | Tarifpräferenz 142 | |
1011 | ERGA OMNES 1011 | 01-11-2026 | 2 EUR | Union handling fee 800 |
1011 | ERGA OMNES 1011 | 01-11-2026 | 3 EUR | Low-value consignment customs duty 107 |
| Ivory Coast CI | 02-12-2019 | 0 % | Tarifpräferenz 142 | |
2000 | Preferential origin in accordance with the Agreement in the form of an Exchange of Letters between the European Union and the Kingdom of Morocco on the amendment of Protocols 1 and 4 to the Euro-Mediterranean Agreement establishing an association between the European Communities and their Member States, of the one part, and the Kingdom of Morocco, of the other part. 2000 | 03-10-2025 | 0 % | Tarifpräferenz 142 |
| Cameroon CM | 04-08-2014 | 0 % | Tarifpräferenz 142 | |
1035 | SADC EPA 1035 | 10-10-2016 | 0 % | Tarifpräferenz 142 |
| South Africa ZA | 10-10-2016 | 0 % | Tarifpräferenz 142 | |
1034 | Eastern and Southern Africa States 1034 | 14-05-2012 | 0 % | Tarifpräferenz 142 |
| Ghana GH | 15-12-2016 – 31-12-2026 | 0 % | Tarifpräferenz 142 | |
| Israel IL | 16-05-2023 | 0 % | Tarifpräferenz 142 | |
| Solomon Islands SB | 17-05-2020 | 0 % | Tarifpräferenz 142 | |
| Papua New Guinea PG | 20-12-2009 | 0 % | Tarifpräferenz 142 | |
| Fiji FJ | 28-07-2014 | 0 % | Tarifpräferenz 142 | |
1033 | CARIFORUM 1033 | 29-12-2008 | 0 % | Tarifpräferenz 142 |
| Samoa WS | 31-12-2018 | 0 % | Tarifpräferenz 142 |
| Ursprungsland | Start | Zoll / Steuer | Rechtsgrundlage Maßnahmetyp | |
|---|---|---|---|---|
| Russian Federation RU | 19-12-2023 – 31-12-2027 | Dokument nötig ohne Dokument verboten | Importkontrolle 762 | |
| Belarus BY | 25-02-2025 | Dokument nötig ohne Dokument verboten | Importkontrolle 760 | |
1011 | ERGA OMNES 1011 | 25-06-2025 | Dokument nötig ohne Dokument verboten | Import control of fluorinated greenhouse gases 724 |
| Ukraine UA | 24-06-2026 | Dokument nötig ohne Dokument verboten | Importkontrolle 762 | |
| Ukraine UA | 24-06-2026 | Dokument nötig ohne Dokument verboten | Importkontrolle 760 |
Erklärung der Handelsbeschränkungen
Erga Omnes bedeutet "für alle".
Drittländer sind Länder, die nicht der EU angehören.
GSP bedeutet "Generalised System of Preferences".
GSP Plus bedeutet "Generalised System of Preferences Plus".
European Economic Area (EEA) bedeutet alle EU-Mitgliedstaaten und Island, Liechtenstein und Norwegen.
OCTs steht für "Overseas Countries and Territories". Es sind Länder und Gebiete, die nicht der EU angehören. Mehr Informationen
CARIFORUM ist eine regionale Wirtschaftsintegrationsorganisation, die 15 Mitgliedstaaten der Karibischen Gemeinschaft (CARICOM) und die Dominikanische Republik umfasst.
SADC EPA steht für "Southern African Development Community - Economic Partnership Agreement".
Zoll bedeutet "Zollabgaben".
Einfuhrkosten für 3919908020 schätzen
- Zollwert 1.000,00 €
- Zoll 6,5 % 65,00 €
- Einfuhrumsatzsteuer 19 % 202,35 €
- Summe 1.267,35 €
Kann unter Bedingungen niedriger sein:
- Airworthiness tariff suspension: 0 %
- Suspension - goods for certain categories of ships, boats and other vessels and for drilling or production platforms: 0 %
- Autonomous tariff suspension: 0 %
Dokumente und Kontrollen für Vereinigte Staaten
Nur eine Schätzung. Der Zollwert ist der Preis einschließlich Transport und Versicherung bis zur EU-Grenze. Verbrauchsteuern, andere Gebühren und herstellerbezogene Antidumpingzölle sind nicht berücksichtigt. Präferenzsätze gelten nur mit gültigem Ursprungsnachweis. Länderzugehörigkeit und Ausnahmen: TARIC, Stand November 2026.
Ausfuhrmaßnahmen für 3919908020
Was gilt, wenn diese Waren die EU verlassen: Ausfuhrkontrollen, Dual-Use- und andere Genehmigungen, Verbote je Bestimmungsland und die besondere Maßeinheit der Ausfuhranmeldung.
| Bestimmungsland | Start | Zoll / Steuer | Rechtsgrundlage Maßnahmetyp | |
|---|---|---|---|---|
| Russian Federation RU | 01-12-2024 | Dokument nötig ohne Dokument verboten | Export control 767 | |
| Iran, Islamic Republic of IR | 31-01-2026 | Dokument nötig ohne Dokument verboten | Export control 767 |
Geschichte
Zollsätze und Maßnahmen für diesen Code im Zeitverlauf (Jahresstände).
Präferenzursprungsregeln für 3919908020
Was eine Ware erfüllen muss, um als Ursprungsware eines Partnerlandes zu gelten und den Präferenzzoll zu erhalten, je Abkommen. Wortlaut der Abkommen auf Englisch.
EU-Egypt Association Agreement · Ägypten
EU-Morocco Association Agreement · Marokko
Semi-manufactures and articles of plastics; except for headings ex3916, ex3917, ex3920 and ex3921, for which the rules are set out below:
– Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
– Other:
– – Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [16] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
– – Other / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
Autonomous Trade Preferences (Western Balkans) · Kosovo
Semi-manufactures and articles of plastics; except for headings ex39 16, ex39 17, ex39 20 and ex39 21, for which the rules are set out below:
- Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
- Other:
- - Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [16] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
- - Other / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
EU-Canada CETA · Kanada
A change from any other heading.
EU-Chile Association Agreement · Chile
Semi-manufactures and articles of plastics; except for headings ex39 16, ex39 17, ex39 20 and ex39 21, for which the rules are set out below: — Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product — Other: — — Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [16] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product — — Other / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
EU-Colombia/Peru/Ecuador Trade Agreement · Ecuador, Kolumbien, Peru
Plastics and articles thereof / or: Manufacture from materials of any heading, except that of the product / or: Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product
EU-Algeria Association Agreement · Algerien
Semi-manufactures and articles of plastics; except for headings ex3916, ex3917, ex3920 and ex3921, for which the rules are set out below:
– Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
– Other:
– – Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product,
and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [16] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
EPA CARIFORUM
Semi-manufactures and articles of plastics; except for headings Nos ex 3916, ex 3917, ex 3920 and ex 3921, for which the rules are set out below: – Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of any materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product – Other: – – Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: – the value of all the materials used does not exceed 50 % of the ex-works price of the product; – the value of any materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product (e) / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product – – Other / or: Manufacture in which the value of any materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product (e) / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
EU Market Access Regulation (EPA) · Côte d’Ivoire, Ghana, Kamerun, Kenia
Semi-manufactures and articles of plastics; except for headings Nos ex3916, ex3917, ex3920 and ex3921, for which the rules are set out below:
– Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of any materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
– Other:
– – Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product; the value of any materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
– – Other / or: Manufacture in which the value of any materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [18] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
Generalised Scheme of Preferences (GSP, GSP+, EBA) · Armenien, Indien, Kenia, Pakistan, Salomonen, Samoa, Syrien, Vietnam
Plastics and articles thereof; except for: / or: (a) LDCs Manufacture from materials of any heading, except that of the product. or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product / or: (b) Other beneficiary countries Manufacture from materials of any heading, except that of the product. or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
EU-Jordan Association Agreement · Jordanien
Semi-manufactures and articles of plastics; except for headings ex 3916, ex 3917, ex 3920 and ex 3921, for which the rules are set out below: - Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product - Other: - - Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [16] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product - - Other / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
EU-Japan EPA · Japan
CTH; MaxNOM 50 % (EXW); or RVC 55 % (FOB).
EU-Korea FTA · Südkorea
Plastics in primary forms, waste, parings and scrap, of plastic; semi-manufactures and articles of plastics / or: Manufacture from materials of any heading, except that of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
EU-Central America Association Agreement
Semi-manufactures and articles of plastics / or: Manufacture from materials of any heading, except that of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
EU-Lebanon Association Agreement · Libanon
Semi-manufactures and articles of plastics; except for headings ex3916, ex3917, ex3920 and ex3921, for which the rules are set out below:
– Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
– Other:
– – Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [16] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
– – Other / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
EU-Mexico Global Agreement · Mexiko
Semi-manufactures and articles of plastics; except for headings Nos ex39 16, ex39 17, ex39 20 and ex39 21, for which the rules are set out below: — Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which all the materials used are classified within a Chapter other than Chapter 39. However, materials classified within Chapter 39 may be used, provided their value does not exceed 50 % of the ex-works price of the product [23] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product — Other: — — Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, the value of any materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [24] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product — — Other / or: Manufacture in which all the materials used are classified within a Chapter other than Chapter 39. However, materials classified within Chapter 39 may be used, provided their value does not exceed 20 % of the ex-works price of the product [25] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
EU-Palestine Interim Association Agreement · Palästina
Semi-manufactures and articles of plastics; except for headings Nos ex 3916, ex 3917, ex 3920 and ex 3921, for which the rules are set out below: - Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked - Other: / or: Manufacture in which the value of any materials of Chapter 39 used does not exceed 50% of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product -- Addition homopolymerization products in which a single monomer contributes more than 99% by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50% of the ex-works price of the product; the value of any materials of Chapter 39 used does not exceed 20% of the ex-works price of the product [1] / or: Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product -- Other / or: Manufacture in which the value of any materials of Chapter 39 used does not exceed 20% of the ex-works price of the product 1 / or: Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product
EU-Singapore FTA · Singapur
Plastics and articles thereof: except for: / or: Manufacture from materials of any heading, except that of the product. However materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-work price of the product or Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
EU-Tunisia Association Agreement · Tunesien
Semi-manufactures and articles of plastics; except for headings ex 3916, ex 3917, ex 3920 and ex 3921, for which the rules are set out below: Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [16] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
Quelle: Europäische Kommission, Access2Markets (CC BY 4.0, gekürzt). Maßgeblich ist der Text des Abkommens. Access2Markets
Anmerkungen und Erläuterungen zu 3919908020
3919 Erläuterungen zur Kombinierten Nomenklatur: Tafeln, Platten, Folien, Filme, Bänder, Streifen und andere Flacherzeugnisse, selbstklebend, aus Kunststoffen, auch in Rollen
Zur Bestimmung des Begriffs „selbstklebend“ siehe die Erläuterungen zu Position 3919 des HS, erster Absatz. Nicht zu dieser Position gehören Flacherzeugnisse aus Kunststoffen, die nur auf glatten Oberflächen, wie Glas, haften. Die hierher gehörenden Erzeugnisse sind oft mit einer abziehbaren Schutzfolie aus Papier oder Kunststoff versehen. Diese Schutzfolie beeinflusst nicht die Einreihung dieser Erzeugnisse.
Anmerkungen zu Kapitel 39
Anmerkungen 1. Als „Kunststoffe“ gelten in der Nomenklatur die Stoffe der Positionen 3901 bis 3914, die im Zeitpunkt der Polymerisation oder in einem späteren Stadium unter einer äußeren Einwirkung (im Allgemeinen Wärme und Druck, falls erforderlich auch unter Zuhilfenahme von Lösemitteln oder Weichmachern) durch Gießen, Pressen, Strangpressen, Walzen oder ein anderes Verfahren eine Form erhalten können oder erhalten haben, die auch nach Beendigung der äußeren Einwirkung erhalten bleibt. Der Begriff „Kunststoffe“ umfasst in der Nomenklatur auch Vulkanfiber. Dagegen ist dieser Begriff nicht anwendbar auf Stoffe, die als Spinnstoffe des Abschnitts XI gelten. 2. Zu Kapitel 39 gehören nicht: a) zubereitete Schmiermittel der Position 2710 oder 3403; b) Wachse der Position 2712 oder 3404; c) isolierte chemisch einheitliche organische Verbindungen (Kapitel 29); d) Heparin oder seine Salze (Position 3001); e) Lösungen von Erzeugnissen der Positionen 3901 bis 3913 (ausgenommen Kollodium) in flüchtigen organischen Lösemitteln, wenn der Anteil des Lösemittels 50 GHT der Lösung übersteigt (Position 3208); Prägefolien der Position 3212; f) organische grenzflächenaktive Stoffe oder Zubereitungen der Position 3402; g) Schmelzharze und Harzester (Position 3806); h) zubereitete Additives für Mineralöle (einschließlich Kraftstoffe) oder für andere, zu denselben Zwecken wie Mineralöle verwendete Flüssigkeiten (Position 3811); ij) zubereitete hydraulische Flüssigkeiten auf der Grundlage von Polyglykolen, Siliconen oder anderen Polymeren des Kapitels 39 (Position 3819); k) Diagnostik- oder Laborreagenzien auf einem Träger aus Kunststoffen (Position 3822); l) synthetischer Kautschuk im Sinne des Kapitels 40 und Waren daraus; m) Sattlerwaren (Position 4201), Koffer, Handtaschen oder andere Behältnisse der Position 4202; n) Flechtwaren und Korbmacherwaren des Kapitels 46; o) Wandverkleidungen der Position 4814; p) Erzeugnisse des Abschnitts XI (Spinnstoffe und Waren daraus); q) Waren des Abschnitts XII (z. B. Schuhe und Schuhteile, Kopfbedeckungen und Teile davon, Regenschirme, Sonnenschirme, Spazierstöcke, Peitschen, Reitpeitschen und Teile davon); r) Fantasieschmuck der Position 7117; s) Waren des Abschnitts XVI (Maschinen und Apparate, elektrotechnische Waren); t) Teile von Beförderungsmitteln des Abschnitts XVII; u) Waren des Kapitels 90 (z. B. optische Elemente, Brillenfassungen, Zeicheninstrumente); v) Waren des Kapitels 91 (z. B. Gehäuse für Uhren und andere Uhrmacherwaren); w) Waren des Kapitels 92 (z. B. Musikinstrumente und Teile davon); x) Waren des Kapitels 94 (z. B. Möbel, Leuchten und Beleuchtungskörper, Reklameleuchten, vorgefertigte Gebäude); y) Waren des Kapitels 95 (z. B. Spielzeug, Spiele, Sportgeräte); z) Waren des Kapitels 96 (z. B. Bürsten, Knöpfe, Reißverschlüsse, Kämme, Mundstücke und Rohre für Tabakpfeifen, Zigarettenspitzen oder dergleichen, Teile von Isolierflaschen, Kugelschreiber, Füllhalter, Drehbleistifte und Ein-, Zwei-, Dreibeinstative und ähnliche Waren). 3. Zu den Positionen 3901 bis 3911 gehören nur durch chemische Synthese hergestellte Erzeugnisse der folgenden Kategorien: a) flüssige synthetische Polyolefine, bei deren Destillation weniger als 60 RHT bis 300 °C übergehen, nach Umrechnung auf 1 013 mbar, wenn eine Vakuumdestillation durchgeführt wird (Positionen 3901 und 3902); b) niedrig polymerisierte Harze vom Cumaron-Inden-Typ (Position 3911); c) andere synthetische Polymere aus durchschnittlich fünf oder mehr monomeren Einheiten; d) Silicone (Position 3910); e) Resole (Position 3909) und andere Prepolymere. 4. Als „Copolymere“ gelten alle Polymere, bei denen keine einzelne Monomereinheit 95 GHT oder mehr zum Gesamtpolymergehalt beiträgt. Im Sinne des Kapitels 39 sind, wenn nichts anderes bestimmt ist, Copolymere (einschließlich Copolykondensate, Copolyadditionserzeugnisse, Blockcopolymere und Pfropfcopolymere) und Polymergemische der Position zuzuweisen, welche die Polymere derjenigen Comonomereinheit erfasst, die gewichtsmäßig gegenüber jeder anderen einzelnen Comonomereinheit überwiegt. Im Sinne dieser Anmerkung sind dabei die konstitutionellen Comonomereinheiten von Polymeren, die zur selben Position gehören, zusammenzuziehen. Wenn keine einzelne Comonomereinheit überwiegt, sind Copolymere oder Polymergemische der Letzten der in Betracht kommenden Position zuzuweisen. 5. Chemisch modifizierte Polymere — das sind solche, bei denen nur an den Seitengruppen der Hauptpolymerkette Änderungen durch chemische Reaktionen vorgenommen wurden — sind derjenigen Position zuzuweisen, die das nicht modifizierte Polymer erfasst. Diese Bestimmung gilt nicht für Pfropfcopolymere. 6. Als „Primärformen“ im Sinne der Positionen 3901 bis 3914 gelten nur folgende Formen: a) Flüssigkeiten und Pasten, einschließlich Dispersionen (Emulsionen und Suspensionen) und Lösungen; b) Blöcke von unregelmäßiger Form, Brocken, Krümel, Pulver (einschließlich Formmassen), Granulate, Flocken und ähnliche lose Formen. 7. Zu Position 3915 gehören nicht Abfälle, Schnitzel und Bruch eines einzelnen thermoplastischen Stoffes, die in Primärformen umgewandelt wurden (Positionen 3901 bis 3914). 8. Als „Rohre und Schläuche“ im Sinne der Position 3917 gelten Hohlprodukte, die Halb- oder Fertigerzeugnisse sind (z. B. gerippte Gartenschläuche, perforierte Rohre), wie sie üblicherweise zum Leiten, Befördern und Verteilen von Gasen oder Flüssigkeiten dienen. Diese Bezeichnungen erfassen auch schlauchförmige Wursthüllen und andere flachliegende Rohre und Schläuche. Mit Ausnahme der letztgenannten Erzeugnisse gelten jedoch solche mit einem anderen als runden, ovalen, rechteckigen (mit einer Länge von nicht mehr als dem 1,5fachen der Breite) oder ein regelmäßiges Vieleck aufweisenden Innenquerschnitt als Profile und nicht als Rohre oder Schläuche. 9. Als „Wand- oder Deckenverkleidungen aus Kunststoffen“ im Sinne der Position 3918 gelten zur Verschönerung von Wänden oder Decken geeignete Erzeugnisse in Rollen mit einer Breite von 45 cm oder mehr, die aus dauerhaft auf einem Träger aus anderen Stoffen als Papier befestigtem Kunststoff bestehen und deren Kunststoffschicht (auf der Schauseite) gemasert, geprägt, farbig gemustert, mit Motiven bedruckt oder anders verziert ist. 10. Als „Tafeln, Platten, Folien, Filme, Bänder und Streifen“ im Sinne der Positionen 3920 und 3921 gelten ausschließlich Tafeln, Platten, Folien, Filme, Bänder und Streifen (ausgenommen solche des Kapitels 54) und Blöcke von regelmäßiger geometrischer Form, auch bedruckt oder anders oberflächenbearbeitet, nicht geschnitten oder lediglich rechteckig oder quadratisch geschnitten (auch wenn sie dadurch den Charakter von Fertigwaren erhalten haben), aber nicht weiter bearbeitet. 11. Zu Position 3925 gehören nur die nachstehend aufgeführten Waren, soweit sie nicht in vorhergehenden Positionen des Teilkapitels II erfasst sind: a) Sammelbehälter, Tanks (einschließlich Klärtanks), Bottiche und ähnliche Behälter, mit einem Fassungsvermögen von mehr als 300 l; b) Bauelemente, wie sie z. B. zum Herstellen von Fußböden, Mauern, Trennwänden, Decken und Bedachungen verwendet werden; c) Regenrinnen und deren Zubehör; d) Türen, Fenster und deren Rahmen, Verkleidungen und Schwellen; e) Geländer, Zäune und ähnliche Absperrungen; f) Fensterläden, Jalousien (einschließlich Jalousetten) und ähnliche Waren, und deren Teile und Zubehör; g) große Regale, zur Montage und zum festen Einbau z. B. in Läden, Werkstätten oder Lagerräumen bestimmt; h) architektonische Ornamente, z. B. Kannelierungen, Gewölbe, Friese; ij) Beschläge und ähnliche Waren zur bleibenden Befestigung an Türen, Fenstern, Treppen, Wänden oder anderen Gebäudeteilen, z. B. Knöpfe, Griffe, Haken, Konsolen, Handtuchhalter, Schalterplatten und andere Abdeckplatten. Unterpositions-Anmerkungen 1. Innerhalb einer Position dieses Kapitels sind Polymere (einschließlich Copolymere) und chemisch modifizierte Polymere gemäß den folgenden Regeln einzureihen: a) Besteht eine Unterposition „andere“ in derselben Gliederungsstufe von Unterpositionen, gilt Folgendes: 1) Die dem Namen eines spezifischen Polymers in der Warenbezeichnung einer Unterposition angefügte Vorsilbe „Poly“ (z. B. Polyethylen oder Polyamid-6,6) bedeutet, dass die konstitutionelle Monomereinheit oder konstitutionellen Monomereinheiten des namentlich genannten Polymers zusammengenommen 95 GHT oder mehr zum Gesamtpolymergehalt beitragen müssen. 2) Die in den Unterpositionen 3901 30, 3901 40, 3903 20, 3903 30 und 3904 30 genannten Copolymere sind diesen Unterpositionen zuzuweisen, wenn die Comonomereinheiten der genannten Copolymere 95 GHT oder mehr zum Gesamtpolymergehalt beitragen. 3) Chemisch modifizierte Polymere sind in die Unterposition „andere“ einzureihen, vorausgesetzt, dass diese chemisch modifizierten Polymere nicht in einer anderen Unterposition genauer erfasst sind. 4) Polymere, die nicht die in den vorstehenden Absätzen 1), 2) oder 3) vorgegebene Beschaffenheit aufweisen, sind innerhalb derselben Gliederungsstufe von Unterpositionen in jene Unterposition einzureihen, die Polymere derjenigen Monomereinheit erfasst, die gewichtsmäßig gegenüber jeder anderen einzelnen Comonomereinheit überwiegt. Dabei sind konstitutionelle Monomereinheiten von Polymeren, die in dieselbe Unterposition fallen, zusammenzuziehen. Nur die konstitutionellen Comonomereinheiten von Polymeren derselben Gliederungsstufe von Unterpositionen sind miteinander zu vergleichen. b) Besteht keine Unterposition „andere“ in derselben Gliederungsstufe von Unterpositionen, so gilt Folgendes: 1) Polymere sind der Unterposition zuzuweisen, die Polymere derjenigen Monomereinheit erfasst, die gewichtsmäßig gegenüber jeder anderen einzelnen Comonomereinheit überwiegt. Dabei sind konstitutionelle Monomereinheiten von Polymeren, die in dieselbe Unterposition fallen, zusammenzuziehen. Nur die konstitutionellen Comonomereinheiten von Polymeren derselben Gliederungsstufe sind miteinander zu vergleichen. 2) Chemisch modifizierte Polymere sind der für das nicht modifizierte Polymer zutreffenden Unterposition zuzuweisen. Polymergemische sind derselben Unterposition zuzuweisen wie die aus denselben Monomereinheiten im selben Mengenverhältnis erhaltenen Polymere. 2. Im Sinne der Unterposition 3920 43 schließt der Begriff „Weichmacher“ auch die Sekundärweichmacher ein. Zusätzliche Anmerkung 1. In das Kapitel 39 gehören mit Zellkunststoff getränkte, bestrichene oder überzogene Fingerhandschuhe, Handschuhe ohne Fingerspitzen und Fausthandschuhe unabhängig davon, — ob sie aus mit Zellkunststoff getränkten, bestrichenen oder überzogenen Geweben, Gewirken, Gestricken (anderen als solchen der Position 5903), Filzen oder Vliesstoffen konfektioniert sind oder — aus nicht getränkten, bestrichenen oder überzogenen Geweben, Gewirken, Gestricken, Filzen oder Vliesstoffen konfektioniert und anschließend mit Zellkunststoff getränkt, bestrichen oder überzogen worden sind, sofern diese Gewebe, Gewirke, Gestricke, Filze oder Vliesstoffe nur der Verstärkung dienen (Anmerkung 3 c) zu Kapitel 56 und Anmerkung 2 a) Ziffer 5) zu Kapitel 59).
Anmerkungen zu Abschnitt VII
KUNSTSTOFFE UND WAREN DARAUS; KAUTSCHUK UND WAREN DARAUS Anmerkungen 1. Warenzusammenstellungen, die aus zwei oder mehreren voneinander getrennten Bestandteilen bestehen, von denen einige oder alle zu diesem Abschnitt gehören, und die erkennbar dazu bestimmt sind, durch Vermischen ein Erzeugnis des Abschnitts VI oder VII herzustellen, sind der für dieses Erzeugnis zutreffenden Position zuzuweisen unter der Voraussetzung, dass die Einzelbestandteile: a) ohne weiteres Umpacken aufgrund ihrer Aufmachung eindeutig erkennbar dazu bestimmt sind, zusammen verwendet zu werden, b) zusammen gestellt werden und c) entweder aufgrund ihrer Beschaffenheit oder ihrer entsprechenden Mengen als einander ergänzend erkennbar sind. 2. Mit Ausnahme der Waren der Position 3918 oder 3919 sind Kunststoffe, Kautschuk und Waren daraus, mit Motiven, Buchstaben oder bildlichen Darstellungen bedruckt, die im Hinblick auf den eigentlichen (ursprünglichen) Gebrauch der Waren nicht nur nebensächlich sind, dem Kapitel 49 zuzuweisen.
Weitere Erläuterungen zum Kapitel
Allgemeines Die Erläuterungen zu Kapitel 39 des HS, Allgemeines, ‚Kunststoffe in Verbindung mit anderen als textilen Stoffen‘, Buchstabe d, gelten sinngemäß für Kohlenstofffasern in Verbindung mit Kunststoffen.
Anmerkung 4: Berechnung der Massenverhältnisse von Monomereinheiten in Copolymeren: Die Massenverhältnisse der einzelnen Monomereinheiten in Copolymerketten werden auf der Grundlage der Molekularstruktur des Copolymers (nicht der Ausgangsstoffe) unter Berücksichtigung der Bildungsreaktion des Polymers berechnet. Soweit zutreffend, wird das Atom, das zwei benachbarte Monomereinheiten miteinander verbindet, der Monomereinheit zugeordnet, aus der das Atom stammt. Die folgenden Beispiele veranschaulichen die Berechnung des Monomereinheitsgehalts in Copolymeren: — In Polyethylenterephthalat, einem Polyester aus Teraphthalsäure und Ethylenglykolanteil-Einheiten, werden beide Sauerstoffatome der Glykolmonomereinheit zugeordnet. Ethylenglycol wird daher als C2H4O2 und Terephthalat als C8H4O2 berechnet. — In Polyamid-6,6, einem Polyamid aus Hexamethylendiamin und Adipinsäure, werden beide Stickstoffatome der Diamin-Monomereinheit zugeordnet. Hexamethylendiamin wird daher als C6H14N2 und Adipinsäure als C6H8O2 berechnet.
Anmerkung 6 Die in dieser Anmerkung und in Anmerkung 4 zu Kapitel 32 verwendete Bezeichnung „Lösungen“ umfasst nicht kolloide Lösungen.
Quellen: Kombinierte Nomenklatur 2026, Anhang I der Verordnung (EWG) Nr. 2658/87 (CELEX 32025R1926), und die Erläuterungen zur Kombinierten Nomenklatur (CELEX 02019XC0329(02)-20260213). Die Abschnitts- und Kapitelanmerkungen sind rechtsverbindlich, die Erläuterungen sind Auslegungshilfen. EUR-Lex
Britische verbindliche Zolltarifauskünfte zu 3919908020
Auskünfte von HM Revenue & Customs für Waren, deren britischer Warencode so beginnt wie dieser EU-Code. Der britische Zolltarif weicht vom EU-Tarif ab, für die EU sind sie daher nur eine Orientierung.
- UK 3919908030 Gültig vom 02.02.2026 bis 01.02.2029 · Auskunft 600014864 auf GOV.UK
Reflecting laminated sheet Consisting of a film of polycarbonate embossed on one side with a regular pattern. It is covered on one side with a layer of acrylic polymers and on other side with multiple layers of polymer. One is covered with self adhesive layer and a release sheet In rolls of 4 sizes(24inch, 30inch, 36inch, 48inch) by 50yards It is packaged in individual triwalled cardboard boxes
Begründung
Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 3919 - Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls GIR 5b has been used to identify the type of packaging – individual triwalled cardboard boxes GIR 6 has been used to classify the goods to subheading level 391990 – Other than in rolls of a width not exceeding 20 cm 8 digit code 39199080 - Other than self-adhesive circular polishing pads of a kind used for the manufacture of semiconductor wafers 10 digit code 3919908030 – Reflecting sheet: - of a polycarbonate or acrylic polymer film …
- UK 3919908030 Gültig vom 02.02.2026 bis 01.02.2029 · Auskunft 600014865 auf GOV.UK
Reflecting laminated sheet consisting of a sheet of polycarbonate embossed on one side with a pyrimidal pattern. It has an out coating on one side of acrylic polymers and the other with multilayers of polymers. One is self-adhesive with a release sheet. product come in rolls of a width exceeding 20cm packaged in individual triwalled cardboard boxes
Begründung
Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 3919 - Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls GIR 5b has been used to identify the type of packaging – individual triwalled cardboard boxes GIR 6 has been used to classify the goods to subheading level 391990 – Other than in rolls of a width not exceeding 20 cm 8 digit code 39199080 - Other than self-adhesive circular polishing pads of a kind used for the manufacture of semiconductor wafers 10 digit code 3919908030 – Reflecting sheet: - of a polycarbonate or acrylic polymer film …
- UK 3919908049 Gültig vom 02.02.2026 bis 01.02.2029 · Auskunft 600014867 auf GOV.UK
Multi layered self adhesive sheeting The sheeting consists of polymethylmethacrylate glass beads, a layer of aluminum and self adhesive layer The sheeting is presented in rolls of a width exceeding 20cm in various colours It is packaged in triwalled cardboards boxes
Begründung
Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 3919 - Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls GIR 5b has been used to identify the type of packaging – packaged in cardboards boxes GIR 6 has been used to classify the goods to subheading level 391990 – Other than in rolls of a width not exceeding 20 cm 8 digit code 39199080 - Other than self-adhesive circular polishing pads of a kind used for the manufacture of semiconductor wafers 10 digit code 3919908049 – Reflecting laminated sheet consisting of a film of poly(methyl …
+ 15 weitere
- UK 3919908053 Gültig vom 11.04.2024 bis 10.04.2027 · Auskunft 600010252 auf GOV.UK
Double-Sided, Acrylic Foam Tape Acrylic foam core covered on both sides with an acrylic adhesive with a release liner on one side In rolls Thickness: 0.5 to 2mm Width: 700 and 800mm Use: Automotive industry
Begründung
Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 3919 - Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls GIR 6 has been used to classify the goods to subheading level 391990 – Other than in rolls of a width not exceeding 20 cm 8 digit code 39199080 - Other than self-adhesive circular polishing pads of a kind used for the manufacture of semiconductor wafers 10 digit code 3919908053 – Acrylic foam tape, covered on one side with a heat activatable adhesive or an acrylic pressure sensitive adhesive and on the other side with an acrylic …
- UK 3919908053 Gültig vom 13.09.2024 bis 12.09.2027 · Auskunft 600011294 auf GOV.UK
Double-sided acrylic foam adhesive tapes intended for use in the automotive industry and other industrial environments as a replacement for mechanical fasteners such as rivets, welds or screws. They are covered on both sides with a pressure sensitive acrylic-based adhesive and on one side with a release sheet.
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product to Heading 3919 - Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls GIR 6 has been used to classify this product to sub-heading level 391990 - Other than in rolls of a width not exceeding 20 cm Eight Digit Code - 39199080 Other than Self-adhesive circular polishing pads of a kind used for the manufacture of semiconductor wafers Ten Digit Code - 3919908053 Acrylic foam tape, covered on one side with a heat activatable adhesive or an acrylic pressure sensitive adhesive and on the other side with an acrylic …
- UK 3919908099 Gültig vom 20.12.2023 bis 19.12.2026 · Auskunft 600008916 auf GOV.UK
Self-adhesive protective film intended for use on carpets to protect from spillages or dirt. Available in multiple sizes, in rolls exceeding 20cms. Made from low-density polyethylene and linear low-density polyethylene. The product is coated in acrylic resin glue and sold in rolls.
Begründung
Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 3919 - Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls. GIR 6 has been used to classify the goods to subheading level 391990 – Other than in rolls of a width not exceeding 20 cm. 8-digit code 39199080 - Other than self-adhesive circular polishing pads of a kind used for the manufacture of semiconductor wafers 10-digit code 3919908099 - Other than elsewhere specified Also classified in accordance with: HSEN to 3919
- UK 3919908099 Gültig vom 20.12.2023 bis 19.12.2026 · Auskunft 600009254 auf GOV.UK
Self-adhesive glass protective film intended for use on glass as a barrier to protect from paint splashes, dust or dirt. Available in two sizes, in rolls exceeding 20cms. Made from low-density polyethylene and linear low-density polyethylene with red pigment. The product is coated in acrylic resin glue and sold in rolls. Product available with blue or clear tint.
Begründung
Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 3919 - Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls. GIR 6 has been used to classify the goods to subheading level 391990 – Other than in rolls of a width not exceeding 20 cm. 8-digit code 39199080 - Other than self-adhesive circular polishing pads of a kind used for the manufacture of semiconductor wafers 10-digit code 3919908099 - Other than elsewhere specified Also classified in accordance with: HSEN to 3919
- UK 3919908099 Gültig vom 20.12.2023 bis 19.12.2026 · Auskunft 600009255 auf GOV.UK
Self-adhesive protective film intended for use on surfaces to protect from spills, scratches or dirt. Sold in rolls exceeding 20cms. Made from low-density polyethylene and linear low-density polyethylene with either clear or blue pigment. The product is coated in acrylic resin glue and sold in rolls.
Begründung
Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 3919 - Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls. GIR 6 has been used to classify the goods to subheading level 391990 – Other than in rolls of a width not exceeding 20 cm. 8-digit code 39199080 - Other than self-adhesive circular polishing pads of a kind used for the manufacture of semiconductor wafers 10-digit code 3919908099 - Other than elsewhere specified Also classified in accordance with: HSEN to 3919
- UK 3919908099 Gültig vom 04.12.2023 bis 03.12.2026 · Auskunft 600009327 auf GOV.UK
Self-adhesive plastic film Polyurethane film coated on one side with a pressure sensitive acrylic adhesive with a paper liner Use: to create surgical dressings for the management of wounds, and for the protection of intact skin Packaging: On rolls with a width of 27.2cm and length of 914.4m in protective plastic sheeting
Begründung
Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 3919 - Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls GIR 5b has been used to identify the type of packaging – On rolls with a width of 27.2cm and length of 914.4m in protective plastic sheeting GIR 6 has been used to classify the goods to subheading level 391990 – Other than in rolls of a width not exceeding 20 cm 8 digit code 39199080 - Other than self-adhesive circular polishing pads of a kind used for the manufacture of semiconductor wafers 10 digit code 3919908099 – Other than …
- UK 3919908099 Gültig vom 05.01.2024 bis 04.01.2027 · Auskunft 600009373 auf GOV.UK
Self-adhesive protective film intended for protecting from spills, dirt and contamination from foot traffic. Heavy duty film, available in different sized rolls made from low-density polyethylene and linear low-density polyethylene. The product is coated in acrylic resin glue and sold in rolls exceeding 20cm.
Begründung
Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 3919 - Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls. GIR 6 has been used to classify the goods to subheading level 391990 – Other than in rolls of a width not exceeding 20 cm. 8-digit code 39199080 - Other than self-adhesive circular polishing pads of a kind used for the manufacture of semiconductor wafers 10-digit code 3919908099 - Other than elsewhere specified Also classified in accordance with: HSENs to 3919
- UK 3919908099 Gültig vom 24.02.2025 bis 23.02.2028 · Auskunft 600010082 auf GOV.UK
A double sided optically clear self-adhesive acrylic film. The film is made of acrylic polymers. The film has a polyester release liner on both sides. The film is put up in the form of jumbo rolls. For use in the manufacture of flat panel displays. Packaged in a box.
Begründung
Classification has been determined in accordance with: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s: GIR 1 has been used to classify the product by the terms of heading 3919 - Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls GIR 5 (B) has been used to identify the type of packaging used. GIR 6 has been used to classify the goods to subheading level 391990 – Other than in rolls of a width not exceeding 20cm 8-Digit code 39199080 – Other than Self-adhesive circular polishing pads of a kind used for the manufacture of semiconductor wafers 10-Digit code 3919908099 -Other than for use in certain types of aircraft; Other than elsewhere specified or included in the heading Also …
- UK 3919908099 Gültig vom 24.02.2025 bis 23.02.2028 · Auskunft 600011989 auf GOV.UK
4pk small picture hanging strips These are ideal to use when hanging pictures or canvases onto walls. Two pieces with Velcro backing are attached together; the other sides are adhesive; one side is attached to a wall, and the other to the back of a picture. The product is made of polypropylene, polyester and EVA. Holds approximately 1.8kg Size is 4.6*1.6cm
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 3919 - Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls GIR 6 has been used to classify the goods to subheading level 391990 – Other than in rolls of a width not exceeding 20 cm 8 Digit Code 39199080 - Other than self-adhesive circular polishing pads of a kind used for the manufacture of semiconductor wafers 10 Digit Code 3919908099 - Other than elsewhere specified Also classified in accordance with: Chapter 39 Note 1 Harmonised System Explanatory Notes (HSENs) to 3919 refers
- UK 3919908099 Gültig vom 24.02.2025 bis 23.02.2028 · Auskunft 600011990 auf GOV.UK
4pk large picture hanging strips For use when hanging pictures or canvases onto walls. Two pieces with Velcro backing are attached together; the other sides are adhesive; one side is attached to a wall, and the other to the back of a picture. Holds approximately 7.2kg Product is made of polypropylene, polyester and EVA Size is 9.2*1.9cm
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 3919 - Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls GIR 6 has been used to classify the goods to subheading level 391990 – Other than in rolls of a width not exceeding 20 cm 8 Digit Code 39199080 - Other than self-adhesive circular polishing pads of a kind used for the manufacture of semiconductor wafers 10 Digit Code 3919908099 - Other than elsewhere specified Also classified in accordance with: Chapter 39 Note 1 Harmonised System Explanatory Notes (HSENs) to 3919 refers
- UK 3919908099 Gültig vom 04.03.2025 bis 03.03.2028 · Auskunft 600012565 auf GOV.UK
Silicone foam rubber with a layer of acrylic pressure sensitive adhesive There is a PET film liner on one side Width 36in (914mm) The foam can be in thicknesses of 0.8mm to 25.4mm with the adhesive layer being 0.127mm in thickness across the range Use: for sealing and insulation Packaged: in rolls and sheets
Begründung
Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 3919 - Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls GIR 5b has been used to identify the type of packaging – rolls or sheets GIR 6 has been used to classify the goods to subheading level 391990 – Other than in rolls of a width not exceeding 20 cm 8 digit code 39199080 - Other than self-adhesive circular polishing pads of a kind used for the manufacture of semiconductor wafers 10 digit code 3919908099 – Other than elsewhere specified Also classified in accordance with: Chapter 39 …
- UK 3919908099 Gültig vom 24.09.2025 bis 23.09.2028 · Auskunft 600013610 auf GOV.UK
Self Adhesive Plastic Seal Small self adhesive plastic seal, presented in sheets and on a release liner. The seal is pressure sensitive and will be affixed to the toner bottle shutter, which is inserted into the neck of a toner bottle to prevent the accidental escape of toner. Components: PET film with acrylic adhesive surface, Microcellular Polyurethane Foam, bottom layer consisting of two layers of acrylic adhesive with a strong woven fabric in between.
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 3919 - Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls GIR 6 has been used to classify the goods to subheading level 391990 – Other than In rolls of a width not exceeding 20 cm 8 Digit Code 39199080 - Other than self-adhesive circular polishing pads of a kind used for the manufacture of semiconductor wafers 10 Digit Code 3919908099 – Other than elsewhere specified Also classified in accordance with: Harmonised System Explanatory Notes (HSENs) to 3919
- UK 3919908099 Gültig vom 19.11.2025 bis 18.11.2028 · Auskunft 600014241 auf GOV.UK
Self adhesive foamed polyurethane (PU) seal which is fitted to the neck of toner bottles to help prevent leakage when the bottles are not in use. The seals measure approximately 30mm x 2mm, and are shipped on sheets. The seals are peeled off the paper release sheet and affixed to the toner shutter. The process only requires light pressure to stick the seal onto the shutter for the seal to be permanently affixed. 100% PU
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 3919 - Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls GIR 6 has been used to classify the goods to subheading level 391990 – Other than In rolls of a width not exceeding 20 cm 8 Digit Code 39199080 - Other than self-adhesive circular polishing pads of a kind used for the manufacture of semiconductor wafers 10 Digit Code 3919908099 – Other than elsewhere specified Also classified in accordance with: Chapter 39 Note 1 Harmonised System Explanatory Notes (HSENs) to 3919
- UK 3919908099 Gültig vom 17.12.2025 bis 16.12.2028 · Auskunft 600014494 auf GOV.UK
An entrance tacky mat designed to capture dust, dirt, and debris from footwear as people enter a building or site. Made from a water based acrylic resin adhesive and polyethylene. Each sheet features a gentle adhesive layer that lifts surface contaminants when stepped on. Its low-profile construction ensures compatibility with pre-hung doors, allowing them to open and close smoothly over the mat without obstruction. Suitable also for use alongside Temporary Screening. The mat comprises 30 peel-away sheets, each with a self-adhesive backing to keep the mat securely fixed to the floor. Measuring 1150mm x 450mm.
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General Interpretative Rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 3919 - Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls GIR 5B has been used identify the type of packaging. GIR 6 has been used to classify this product by the terms of heading 391990 - Other than in rolls of a width not exceeding 20 cm 8 Digit code 39199080 - Other than self-adhesive circular polishing pads of a kind used for the manufacture of semiconductor wafers 10 Digit code 3919908099 - Other than elsewhere specified Also classified in accordance with: Chapter 39 Note 1 …
- UK 3919908099 Gültig vom 13.08.2026 bis 12.08.2029 · Auskunft 600016061 auf GOV.UK
The product is a square shaped plastic pad. It is made from Ethylene-Vinyl Acetate (EVA). The product is self-adhesive. The pad is 30 × 31 × 0.5 cm in size. The pad is a part for a cat exercise wheel. The pad is affixed to the running surface of the wheel to provide traction for the cat during use. The product comes in packs of 12. The pads are packaged in a cardboard box.
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules GIR’s: GIR 1 - Has been used to classify this product by the terms of heading 3919 - Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls. GIR 5 (b) - Has been used to identify the type of packaging – Cardboard boxes. GIR 6 - Has been used to classify the goods to subheading level 391990 - Other than In rolls of a width not exceeding 20 cm. 8-Digit Code 39199080 - Other than Self-adhesive circular polishing pads of a kind used for the manufacture of semiconductor wafers. 10 Digit Code 3919908099 - Other than For use in certain types of aircraft; Other than elsewhere …
Quelle: HM Revenue & Customs, Advance Tariff Rulings. Enthält Informationen des öffentlichen Sektors unter der Open Government Licence v3.0.
Beschränkungen und Hinweise für 3919908020
- Russland-Sanktionen: Einfuhrverbot Verordnung (EU) Nr. 833/2014, Anhang XXI 3919
Art. 3i, Güter, die Russland erhebliche Einnahmen verschaffen
Rechtsakt auf EUR-Lex lesen
Nur zur Orientierung. Prüfen Sie den Rechtsakt, bevor Sie sich auf einen Hinweis verlassen; Schwellenwerte, Ausnahmen und Genehmigungen sind nicht vollständig abgebildet.
EU-Handel 2025 für 3919908020
- Einfuhren aus Drittländern
- 1,3 Mrd. €
- 126.821 t
- Ausfuhren in Drittländer
- 1,9 Mrd. €
Wichtigste Ursprungsländer nach Einfuhrwert
Vereinigte Staaten 337,4 Mio. €
China 311,6 Mio. €
Vereinigtes Königreich 246,3 Mio. €
Südkorea 100,6 Mio. €
Japan 71,3 Mio. €
Werte für den KN8-Code 39199080. Quelle: Eurostat, Comext, CC BY 4.0, aufbereitet von hscode.info. Vertraulicher Handel ist keinen Codes zugeordnet.
Tarifänderungen für 3919908020 seit 2016
- Jan. 2017 3919908020 Code eingeführt
Monatlicher Vergleich der TARIC-Auszüge der Europäischen Kommission. Ohne saisonale Einfuhrpreise.
Einfuhrzoll im Vereinigten Königreich für 391990
- 0%
- 6%
Drittlandszollsätze aller britischen Warencodes unter dieser HS-Unterposition. Quelle: UK Department for Business and Trade, Stand 02.11.2026. Der britische Tarif weicht vom EU-Tarif ab.
Einfuhrumsatzsteuer in der EU
- Belgien 21 %
- Bulgarien 20 %
- Dänemark 25 %
- Deutschland 19 %
- Estland 24 % ggf. 9 %
- Finnland 25,5 %
- Frankreich 20 %
- Griechenland 24 %
- Irland 23 %
- Italien 22 %
- Kroatien 25 %
- Lettland 21 %
- Litauen 21 %
- Luxemburg 17 %
- Malta 18 %
- Niederlande 21 %
- Österreich 20 %
- Polen 23 %
- Portugal 23 %
- Rumänien 21 %
- Schweden 25 %
- Slowakei 23 %
- Slowenien 22 %
- Spanien 21 %
- Tschechien 21 %
- Ungarn 27 %
- Zypern 19 %
Normalsatz je Mitgliedstaat auf Zollwert, Zoll und Transportkosten bis zum Bestimmungsort. Ermäßigte Sätze hängen oft von Verwendung oder Abnehmer ab und gelten nur, wenn das Land sie für die Ware vorsieht. Quelle: Europäische Kommission, Taxes in Europe Database, Stand 02.11.2026.
Ursprungsregeln
Die Präferenzursprungsregeln für die Unterposition 391990 hängen vom Handelsabkommen ab. Die Kommission veröffentlicht sie in Access2Markets.
Ursprungsregeln bei Access2MarketsInformationen
Wenn Sie "andere" importieren oder exportieren, ist es wichtig, den richtigen HS-Code oder TARIC-Code zu haben. Der HS-Code 3919908020 10 ist der Standardcode für dieses Produkt und stellt sicher, dass die richtigen Zölle und Abgaben bei einer Überquerung internationaler Grenzen angewendet werden.
Um sicherzustellen, dass Ihre Geschäftsabwicklung bei der Einfuhr oder Ausfuhr von "andere" reibungslos verläuft, sollten Sie folgende Punkte beachten:
- Informieren Sie sich über die spezifischen Einfuhr- und Ausfuhrbestimmungen in den beteiligten Ländern. Dazu gehören mögliche Beschränkungen, Steuern und Zölle, die auf "andere" anwendbar sind.
- Prüfen Sie, ob zusätzliche Lizenzen, Genehmigungen oder Zertifikate erforderlich sind, um "andere" in das Zielland zu importieren oder aus dem Herkunftsland zu exportieren.
- Achten Sie darauf, dass Ihre Handelspartner über gültige Identifikationsnummern verfügen, wie zum Beispiel die EORI-Nummer (Economic Operators Registration and Identification) in der EU, um den Handel effizienter zu gestalten und Verzögerungen zu minimieren.
- Stellen Sie sicher, dass alle handels- und zollrelevanten Dokumente (wie Handelsrechnungen, Packlisten, Ursprungszertifikate und Versicherungspolicen) korrekt ausgefüllt sind und den jeweiligen nationalen Vorschriften entsprechen.
- Behalten Sie die aktuellen Wechselkurse sowie die Kosten für Verpackung, Versand und Versicherung im Blick, um eine genaue Kalkulation der Handelskosten durchzuführen.
Zusammenfassend lautet der HS-Code oder TARIC-Code für "andere" 3919908020 10. Stellen Sie sicher, dass Sie diesen Code in all Ihren Handels- und Zolldokumenten korrekt verwenden, um eine reibungslose und problemlose Transaktion zu gewährleisten. Mit diesen Tipps sind Sie besser auf die Herausforderungen im internationalen Handel vorbereitet und können erfolgreich "andere" importieren und exportieren.
HS-Code Struktur
1. HS Kapitel
Es gibt 21 unterschiedliche Abschnitte, die in 96 Kapitel unterteilt sind. Ausnahmekapitel beinhalten Kapitel 77, welches für zukünftige Nutzung reserviert ist, Kapitel 98 und 99, die auf nationaler Ebene begrenzt sind, und Kapitel 99, welches ein spezifischer Code für temporäre Änderungen ist. Im obigen Beispiel wurde Kapitel 39 ausgewählt, für kunststoffe und waren daraus
2. HS Position
Die Überschrift bestimmt die spezifische Kategorie innerhalb eines bestimmten Kapitels. Im obigen Beispiel bezieht sich die 19 auf Tafeln, Platten, Folien, Filme, Bänder, Streifen und andere Flacherzeugnisse, selbstklebend, aus Kunststoffen, auch in Rollen.
3. HS Unterposition
Die letzten beiden Ziffern des internationalen Harmonisierten Codes sind spezifischer und definieren Unterkategorien von Produkten. Im obigen Beispiel bezieht sich die 90 auf andere.
HS-Code Baumstruktur
3900000000 80
HS Kapitel KUNSTSTOFFE UND WAREN DARAUS
3919000000 80
Tafeln, Platten, Folien, Filme, Bänder, Streifen und andere Flacherzeugnisse, selbstklebend, aus Kunststoffen, auch in Rollen
3919100000 80
- in Rollen mit einer Breite von 20 cm oder weniger
3919101200 10
- - Bänder (Streifen), mit nicht vulkanisiertem Naturkautschuk oder nicht vulkanisiertem synthetischen Kautschuk bestrichen
3919101200 80
- - - aus Poly(vinylchlorid) oder aus Polyethylen
3919101500 80
- - - aus Polypropylen
3919101900 80
- - - andere
3919101910 80
- - - - reflektierende Folie, bestehend aus einer Polyurethanschicht, die auf der einen Seite mit Sicherheitsmarkierungen gegen Fälschung, Änderung oder Austausch von Daten oder Vervielfältigung oder mit einer offiziellen Markierung für den Verwendungszweck, für den sie bestimmt ist, und eingelassenen Glaskügelchen und auf der anderen Seite mit einer Klebeschicht versehen ist, ein- oder beidseitig mit einer abziehbaren Schutzfolie bedeckt
3919101990 80
- - - - andere
3919108000 80
- - andere
3919108010 80
- - - für bestimmte Luftfahrzeuge
3919108025 10
- - - andere
3919108025 80
- - - - reflektierende Folie, bestehend aus einer Polyurethanschicht, die auf der einen Seite mit Sicherheitsmarkierungen gegen Fälschung, Änderung oder Austausch von Daten oder Vervielfältigung oder mit einer offiziellen Markierung für den Verwendungszweck, für den sie bestimmt ist, und eingelassenen Glaskügelchen und auf der anderen Seite mit einer Klebeschicht versehen ist, ein- oder beidseitig mit einer abziehbaren Schutzfolie bedeckt
3919108027 80
- - - - Polyesterfolie: - auf einer Seite mit einem durch Wärme lösbaren Acrylklebstoff, welcher sich bei einer Temperatur von 90 °C oder mehr, aber nicht mehr als 200 °C ablöst, und einer Polyesterschicht bedeckt und - auf der anderen Seite entweder unbeschichtet oder mit einem druckempfindlichen Acrylklebstoff beschichtet oder beschichtet mit einem durch Wärme lösbaren Acrylklebstoff, welcher sich bei einer Temperatur von 90 °C oder mehr, aber nicht mehr als 200 °C ablöst, und mit einer Polyesterschicht bedeckt
3919108035 80
- - - - reflektierende Folie, bestehend aus einer Poly(vinylchlorid)schicht, einer Alkydpolyesterschicht, die auf einer Seite mit Sicherheitsmarkierungen gegen Fälschung, Änderung oder Austausch von Daten oder Vervielfältigung oder mit einer nur bei rückstrahlender Beleuchtung sichtbaren offiziellen Markierung für den Verwendungszweck, für den sie bestimmt ist, und eingelassenen Glaskügelchen und auf der anderen Seite mit einer Klebeschicht versehen ist, ein- oder beidseitig mit einer abziehbaren Schutzfolie bedeckt
3919108045 80
- - - - verstärktes Band aus Polyethylen-Schaumstoff, beidseitig mit druckempfindlichem und mit Mikrokanälen versehenem Acrylatklebstoff sowie auf einer Seite mit einer Schutzabdeckung beschichtet, mit einer Anwendungsdicke von 0,38 mm oder mehr, jedoch nicht mehr als 1,53 mm
3919108055 80
- - - - Bänder aus Acrylschaum: - auf einer Seite mit einem wärmeaktivierbaren Klebstoff oder druckempfindlichen Acrylklebstoff versehen, - auf der anderen Seite mit einem druckempfindlichen Acrylklebstoff versehen, - ein- oder beidseitig mit einer abziehbaren Schutzfolie versehen - mit einer Schälhaftung („peel adhesion“) bei einem Winkel von 90° von mehr als 25 N/cm (nach ASTM D 3330)
3919108057 80
- - - - Reflektierende Folie - aus einer Polycarbonat- oder Polyacrylfolie einseitig mit gleichmäßigen Einprägungen versehen, - einseitig oder beidseitig mit einer oder mehreren Lagen aus Kunststoff überzogen oder metallisiert, - auch mit einer Klebeschicht und einer abziehbaren Schutzfolie auf einer Seite
3919108063 80
- - - - Reflektierende Folie, bestehend aus - einer Acrylharzschicht mit Sicherheitsmarkierungen gegen Fälschung, Veränderung oder Austausch von Daten oder Vervielfältigung oder mit einer offiziellen Markierung für den Verwendungszweck, - einer Acrylharzschicht mit eingelassenen Glaskügelchen, - einer mit einem Melamin-Vernetzungsmittel gehärteten Acrylharzschicht, - einer Metallschicht, - einem Acrylklebstoff und - einer abziehbaren Schutzfolie
3919108073 80
- - - - Selbstklebende reflektierende Verbundfolie, auch in segmentierten Stücken, - auch mit einem Wasserzeichen, - auch mit einer Schicht Übertragungsfolie, einseitig mit einem Klebstoff beschichtet; die reflektierende Folie besteht aus: - einer Schicht Acryl- oder Vinylpolymer, - einer Schicht Poly(methylmethacrylat) oder Polycarbonat mit Mikroprismen - einer metallisierten Schicht, - einer Klebeschicht und - einer abziehbaren Schutzfolie - auch mit einer zusätzlichen Polyesterschicht
3919108075 80
- - - - selbstklebende reflektierende Folie, bestehend aus mehreren Lagen, darunter: - einem Acrylharz-Copolymer, - Polyurethan, - einer metallisierten Schicht, auf einer Seite versehen mit Laserbeschriftung zum Schutz vor Fälschung, Veränderung oder Austausch der Daten sowie vor Vervielfältigung, oder mit einer offiziellen Kennzeichnung für eine bestimmte Verwendung, - Mikroglaskugeln und - einer Klebeschicht mit einer abziehbaren Schutzfolie auf einer oder auf beiden Seiten
3919108078 80
- - - - Polytetrafluorethylenfolie, -mit einer Dicke von 50 μm oder mehr, -mit einer Breite von 6,30 mm oder mehr, jedoch nicht mehr als 740 mm, -mit einer Bruchdehnung von nicht mehr als 200 % und -einseitig mit einer Schicht eines druckempfindlichen Siliconklebstoffs von nicht mehr als 50 μm Dicke versehen
3919108090 80
- - - - andere
3919900000 80
- andere
3919902000 80
- - selbstklebende, runde Polierscheiben von der für die Herstellung von Halbleiterscheiben (wafers) verwendeten Art
3919908000 80
- - andere
3919908010 80
- - - für bestimmte Luftfahrzeuge
3919908020 10
- - - andere
3919908020 80
- - - - Polyesterfolie: - auf einer Seite mit einem durch Wärme lösbaren Acrylklebstoff, welcher sich bei einer Temperatur von 90 °C oder mehr, aber nicht mehr als 200 °C ablöst, und einer Polyesterschicht bedeckt und - auf der anderen Seite entweder unbeschichtet oder mit einem druckempfindlichen Acrylklebstoff beschichtet oder beschichtet mit einem durch Wärme lösbaren Acrylklebstoff, welcher sich bei einer Temperatur von 90 °C oder mehr, aber nicht mehr als 200 °C ablöst, und mit einer Polyesterschicht bedeckt
3919908023 80
- - - - Folien bestehend aus 1 bis 3 laminierten Schichten aus Poly(ethylenterephthalat) und einem Copolymer aus Terephthalsäure, Sebacinsäure und Ethylenglykol, auf einer Seite mit abriebfestem Acryl beschichtet und auf der anderen Seite mit druckempfindlichem Acrylklebstoff, einer wasserlöslichen Methylcellulose-Schicht und einer Schutzabdeckung aus Poly(ethylenterephthalat) beschichtet
3919908024 80
- - - - Reflektierende Verbundfolie, - bestehend aus einer Epoxyacrylatschicht mit eingeprägtem gleichmäßigem Muster auf einer Seite, - beidseitig mit einer oder mehreren Kunststoffschichten versehen, - einseitig mit einer Klebstoffschicht und einer Abziehfolie versehen
3919908030 80
- - - - Reflektierende Folie - aus einer Polycarbonat- oder Polyacrylfolie einseitig mit gleichmäßigen Einprägungen versehen, - einseitig oder beidseitig mit einer oder mehreren Lagen aus Kunststoff überzogen oder metallisiert, - auch mit einer Klebeschicht und einer abziehbaren Schutzfolie auf einer Seite
3919908031 80
- - - - reflektierende Folie, bestehend aus einer Polyurethanschicht, die auf der einen Seite mit Sicherheitsmarkierungen gegen Fälschung, Änderung oder Austausch von Daten oder Vervielfältigung oder mit einer offiziellen Markierung für den Verwendungszweck, für den sie bestimmt ist, und eingelassenen Glaskügelchen und auf der anderen Seite mit einer Klebeschicht versehen ist, ein- oder beidseitig mit einer abziehbaren Schutzfolie bedeckt
3919908033 80
- - - - Transparente selbstklebende Poly(ethylen)folie, ohne Verunreinigungen oder Fehlstellen, auf einer Seite mit druckempfindlichem Acrylklebstoff beschichtet, mit einer Dichte von 60 μm oder mehr, jedoch nicht mehr als 70 μm und einer Breite von mehr als 1 245 mm, jedoch nicht mehr als 1 255 mm
3919908045 80
- - - - verstärktes Band aus Polyethylen-Schaumstoff, beidseitig mit druckempfindlichem und mit Mikrokanälen versehenem Acrylatklebstoff sowie auf einer Seite mit einer Schutzabdeckung beschichtet, mit einer Anwendungsdicke von 0,38 mm oder mehr, jedoch nicht mehr als 1,53 mm
3919908048 80
- - - - Polytetrafluorethylenfolie, -mit einer Dicke von 50 μm oder mehr, -mit einer Breite von 6,30 mm oder mehr, jedoch nicht mehr als 740 mm, -mit einer Bruchdehnung von nicht mehr als 200 % und -einseitig mit einer Schicht eines druckempfindlichen Siliconklebstoffs von nicht mehr als 50 μm Dicke versehen
3919908049 80
- - - - reflektierende Verbundfolie bestehend aus einer Poly(methlymethacrylat)folie, auf der auf einer Seite ein regelmäßiges Muster eingeprägt ist, einer Folie, welche Mikrokugeln aus Glas enthält, einer Klebeschicht und einer abziehbaren Schutzfolie
3919908050 80
- - - - Selbstklebende reflektierende Verbundfolie, auch in segmentierten Stücken, - auch mit einem Wasserzeichen, - auch mit einer Schicht Übertragungsfolie, einseitig mit einem Klebstoff beschichtet; die reflektierende Folie besteht aus: - einer Schicht Acryl- oder Vinylpolymer, - einer Schicht Poly(methylmethacrylat) oder Polycarbonat mit Mikroprismen - einer metallisierten Schicht, - einer Klebeschicht und - einer abziehbaren Schutzfolie - auch mit einer zusätzlichen Polyesterschicht
3919908053 80
- - - - Bänder aus Acrylschaum: - auf einer Seite mit einem wärmeaktivierbaren Klebstoff oder druckempfindlichen Acrylklebstoff versehen, - auf der anderen Seite mit einem druckempfindlichen Acrylklebstoff versehen, - ein- oder beidseitig mit einer abziehbaren Schutzfolie versehen - mit einer Schälhaftung („peel adhesion“) bei einem Winkel von 90° von mehr als 25 N/cm (nach ASTM D 3330)
3919908054 80
- - - - Polyvinylchlorid-Folie, einseitig versehen mit - einer Polymerschicht, - einer Klebeschicht, - einer abziehbaren Trennschicht, einseitig geprägt, mit abgeflachten Kugeln, auch auf der anderen Seite mit einer Klebeschicht und einer metallisierten Polymerschicht versehen
3919908055 80
- - - - Schwarze Polyvinylchlorid-Folie -mit einem Glanzgrad von mehr als 25 Grad (nach ASTM D 2457), -auch auf einer Seite mit einer Schutzfolie aus Polyethylenterephthalat und auf der anderen Seite mit einem mikrostrukturierten druckempfindlichen Acrylklebstoff und einer abziehbaren Schutzfolie versehen zur Verwendung bei der Herstellung von ausgestanzten Folien für Innen- und Außenflächen von Kraftfahrzeugen
3919908056 80
- - - - Transparente Polyethylenfolie, einseitig mit einem wässrigen Acrylklebstoff beschichtet, mit einer Dicke von 30-50 μm, in Rollen mit einer Breite von 52 cm oder mehr, jedoch nicht mehr als 154 cm
3919908057 80
- - - - Selbstklebende Polycarbonatfolie, bedruckt, auch geformt, mit: -einer Dicke von 0,3 mm oder mehr, jedoch nicht mehr als 0,4 mm, -Mindestabmessungen von 63 mm x 15 mm, -maximalen Abmessungen von 278 mm x 117 mm, -einem Gewicht von nicht mehr als 5 g pro Stück und bestimmt für den Einbau in ein programmierbares Kombiinstrument von Personenkraftwagen
3919908058 80
- - - - Biaxial orientierte Folie aus Poly(methylmethacrylat), mit einer Dicke von 20 μm oder mehr, jedoch nicht mehr als 90 μm, einseitig mit einer Klebeschicht und einer abziehbaren Schutzfolie versehen
3919908065 80
- - - - selbstklebende Folie mit einer Dicke von 40 µm oder mehr, jedoch nicht mehr als 475 µm, bestehend aus einer Schicht oder mehreren Schichten aus durchsichtigem metallisiertem oder gefärbtem Poly(ethylenterephthalat), auf der einen Seite mit einer kratzfesten Beschichtung und auf der anderen Seite mit einem druckempfindlichen Klebstoff und einer Abziehfolie versehen
3919908070 80
- - - - selbstklebende Polierscheiben aus mikroporösem Polyurethan, auch mit einer Unterlage versehen
3919908080 80
- - - - selbstklebende reflektierende Folie, bestehend aus mehreren Lagen, darunter: - einem Acrylharz-Copolymer, - Polyurethan, - einer metallisierten Schicht, auf einer Seite versehen mit Laserbeschriftung zum Schutz vor Fälschung, Veränderung oder Austausch der Daten sowie vor Vervielfältigung, oder mit einer offiziellen Kennzeichnung für eine bestimmte Verwendung, - Mikroglaskugeln und - einer Klebeschicht mit einer abziehbaren Schutzfolie auf einer oder auf beiden Seiten
3919908082 80
- - - - Reflektierende Folie bestehend aus - einer Polyurethanschicht, - einer Schicht, die Mikrokugeln aus Glas enthält, - einer metallisierten Aluminiumschicht und - einer Klebeschicht, auf einer Seite oder auf beiden Seiten mit einer Schutzfolie bedeckt, - auch mit einer Polyvinylchloridschicht - einer Schicht, die Sicherheitsmarkierungen gegen Fälschung, Änderung oder Austausch von Daten oder Vervielfältigung oder eine offizielle Markierung für den vorgesehenen Verwendungszweck enthalten kann
3919908083 80
- - - - Reflektions- oder Diffusionsfolien, in Rollen: -zum Schutz vor ultravioletter oder infraroter Wärmestrahlung, zur Anbringung an Fenstern, oder -zur gleichmäßigen Lichtübertragung und verteilung, für LCD-Module
3919908099 80
- - - - andere