Neu Produkt beschreiben, KN-Code erhalten. Auch als API und MCP für KI-Agenten. Kostenlos testen
Zum Inhalt springen

Zolltarifnummer 3926300040 80 - Innerer Türgriff aus Kunststoff zur Verwendung bei der Herstellung von Kraftfahrzeugen

Änderungen per E-Mail

Import Handelsbeschränkungen für 3926300040 80

Zölle für weitere Codes mit kostenlosem Konto

Sie haben heute 10 Codes mit Zollsätzen angesehen. Melden Sie sich kostenlos an, um Zölle, Maßnahmen und den Verlauf aller Codes zu sehen.

Präferenzursprungsregeln für 3926300040

Was eine Ware erfüllen muss, um als Ursprungsware eines Partnerlandes zu gelten und den Präferenzzoll zu erhalten, je Abkommen. Wortlaut der Abkommen auf Englisch.

  • Autonomous Trade Preferences (Western Balkans) · Kosovo

    EU-Algeria Association Agreement · Algerien

    EU-Egypt Association Agreement · Ägypten

    EU-Jordan Association Agreement · Jordanien

    EU-Lebanon Association Agreement · Libanon

    EU-Morocco Association Agreement · Marokko

    EU-Tunisia Association Agreement · Tunesien

    Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product [13] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [14] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [15] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [16] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [17] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [18] The following foils shall be considered as highly transparent: foils, the optical dimming of which, measured according to ASTM-D 1003-16 by Gardner Hazemeter (i.e. Hazefactor), is less than 2 %.

  • EEA/EFTA agreements (Switzerland, Norway, Liechtenstein, Faroe Islands) · Färöer, Liechtenstein, Norwegen, Schweiz

    EU-Iceland FTA · Island

    EU-Ukraine DCFTA · Ukraine

    Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product [13] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [18] The following foils shall be considered as highly transparent: foils, the optical dimming of which, measured according to ASTM-D 1003-16 by Gardner Hazemeter (i.e. Hazefactor), is less than 2 %.

  • EPA CARIFORUM

    EU-Korea FTA · Südkorea

    Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

  • EU-Canada CETA · Kanada

    A change from any other heading.

  • EU-Chile Association Agreement · Chile

    Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product [13] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [14] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [15] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [16] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [17] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [18] The following foils shall be considered as highly transparent: foils, the optical dimming of which, measured according to ASTM-D 1003—16 by Gardner Hazemeter (i.e. Hazefactor), is less than 2 %.

  • EU-Colombia/Peru/Ecuador Trade Agreement · Ecuador, Kolumbien, Peru

    Plastics and articles thereof / or: Manufacture from materials of any heading, except that of the product / or: Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

  • EPA Eastern and Southern Africa

    Rubber and articles thereof; except for: / or: Manufacture in which all the materials used are classified within a heading other than that of the product [13] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [18] The following foils shall be considered as highly transparent: foils, the optical dimming of which – measured according to ASTM-D 1003-16 by Gardner Hazemeter (i.e. Hazefactor) – is less than 2 per cent.

  • EU Market Access Regulation (EPA) · Côte d’Ivoire, Ghana, Kamerun, Kenia

    Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product [16] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [17] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [18] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [19] The following foils shall be considered as highly transparent: foils, the optical dimming of which - measured according to ASTM-D 1003-16 by Gardner Hazemeter (i.e. Hazefactor) - is less than 2 percent.

  • EPA Pacific · Fidschi, Papua-Neuguinea, Salomonen, Samoa

    Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product [13] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [18] The following foils shall be considered as highly transparent: foils, the optical dimming of which - measured according to ASTM-D 1003-16 by Gardner Hazemeter (i.e. Hazefactor) - is less than 2 %.

  • EU-Georgia DCFTA · Georgien

    Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product [15] Note 3 to Chapter 32 says that these preparations are those of a kind used for colouring any material or used as ingredients in the manufacture of colouring preparations, provided that they are not classified in another heading in Chapter 32. / or: [20] A ‘group’ is regarded as any part of the heading separated from the rest by a semicolon.

  • Generalised Scheme of Preferences (GSP, GSP+, EBA) · Armenien, Indien, Kenia, Pakistan, Salomonen, Samoa, Syrien, Vietnam

    Plastics and articles thereof; except for: / or: (a) LDCs Manufacture from materials of any heading, except that of the product. or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product / or: (b) Other beneficiary countries Manufacture from materials of any heading, except that of the product. or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

  • EU-Israel Association Agreement · Israel

    Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product [22] In the case of the products composed of materials classified both within heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [24] In the case of the products composed of materials classified both within heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [25] In the case of the products composed of materials classified both within heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [28] The following foils shall be considered as highly transparent: foils, the optical dimming of which, measured according to ASTM-D 1003-16 by Gardner Hazemeter (Hazefactor), is less than 2 %.

  • EU-Japan EPA · Japan

    CTH; MaxNOM 50 % (EXW); or RVC 55 % (FOB).

  • EU-Central America Association Agreement

    Articles of plastics / or: Manufacture from materials of any heading, except that of the product / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

  • EU-Moldova DCFTA · Republik Moldau

    Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product [20] The following foils shall be considered as highly transparent: foils, the optical dimming of which, measured according to ASTM-D 1003-16 by Gardner Hazemeter (i.e. Hazefactor), is less than 2 %.

  • EU-Mexico Global Agreement · Mexiko

    Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product [15] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [16] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [17] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [18] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [19] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [20] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [21] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [22] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [23] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [24] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [25] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [26] The following foils shall be considered as highly transparent: foils, the optical dimming of which - measured according to ASTM-D 1003-16 by Gardner Hazemeter (i.e. Hazefactor) - is less than 2 %.

  • Pan-Euro-Mediterranean (PEM) Convention · Ägypten, Albanien, Andorra, Bosnien und Herzegowina, Färöer, Island, Kosovo, Liechtenstein, Montenegro, Nordmazedonien, Norwegen, Palästina, Schweiz, Türkei

    Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product [15] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within heading 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [20] The following foils shall be considered as highly transparent: foils, the optical dimming of which, measured according to ASTM-D 1003-16 by Gardner Hazemeter (i.e. Hazefactor), is less than 2%.

  • EU-Palestine Interim Association Agreement · Palästina

    Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product [1] In the case of the products composed of materials classified within both heading Nos. 3901 to 3906, on the one hand, and within heading Nos. 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [1] The following foils shall be considered as highly transparent: foils, the optical dimming of which - measured according to ASTM-D 1003-16 by Gardner Hazemeter (i.e. Hazefactor) - is less than 2 percent.

  • EPA SADC · Südafrika

    Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex–works price of the product [18] In the case of the products composed of materials classified both within heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to the group of materials which predominates by weight in the product. / or: [19] In the case of the products composed of materials classified both within heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to the group of materials which predominates by weight in the product. / or: [21] In the case of the products composed of materials classified both within heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to the group of materials which predominates by weight in the product. / or: [23] The following foils shall be considered as highly transparent: foils, the optical dimming of which — measured according to ASTM-D 1003-16 by Gardener Hazemeter (i.e. Hazefactor) — is less than 2 percent.

  • EU-Singapore FTA · Singapur

    Manufacture from materials of any heading, except that of the product. However materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-work price of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product [21] In the case of the products composed of materials classified within both headings 3901 to 3906, and in the case of the products within headings 3907 to 3911, this restriction only applies to that group of materials which predominates by weight in the product.

Quelle: Europäische Kommission, Access2Markets (CC BY 4.0, gekürzt). Maßgeblich ist der Text des Abkommens. Access2Markets

Anmerkungen und Erläuterungen zu 3926300040

Anmerkungen zu Kapitel 39

Anmerkungen 1. Als „Kunststoffe“ gelten in der Nomenklatur die Stoffe der Positionen 3901 bis 3914, die im Zeitpunkt der Polymerisation oder in einem späteren Stadium unter einer äußeren Einwirkung (im Allgemeinen Wärme und Druck, falls erforderlich auch unter Zuhilfenahme von Lösemitteln oder Weichmachern) durch Gießen, Pressen, Strangpressen, Walzen oder ein anderes Verfahren eine Form erhalten können oder erhalten haben, die auch nach Beendigung der äußeren Einwirkung erhalten bleibt. Der Begriff „Kunststoffe“ umfasst in der Nomenklatur auch Vulkanfiber. Dagegen ist dieser Begriff nicht anwendbar auf Stoffe, die als Spinnstoffe des Abschnitts XI gelten. 2. Zu Kapitel 39 gehören nicht: a) zubereitete Schmiermittel der Position 2710 oder 3403; b) Wachse der Position 2712 oder 3404; c) isolierte chemisch einheitliche organische Verbindungen (Kapitel 29); d) Heparin oder seine Salze (Position 3001); e) Lösungen von Erzeugnissen der Positionen 3901 bis 3913 (ausgenommen Kollodium) in flüchtigen organischen Lösemitteln, wenn der Anteil des Lösemittels 50 GHT der Lösung übersteigt (Position 3208); Prägefolien der Position 3212; f) organische grenzflächenaktive Stoffe oder Zubereitungen der Position 3402; g) Schmelzharze und Harzester (Position 3806); h) zubereitete Additives für Mineralöle (einschließlich Kraftstoffe) oder für andere, zu denselben Zwecken wie Mineralöle verwendete Flüssigkeiten (Position 3811); ij) zubereitete hydraulische Flüssigkeiten auf der Grundlage von Polyglykolen, Siliconen oder anderen Polymeren des Kapitels 39 (Position 3819); k) Diagnostik- oder Laborreagenzien auf einem Träger aus Kunststoffen (Position 3822); l) synthetischer Kautschuk im Sinne des Kapitels 40 und Waren daraus; m) Sattlerwaren (Position 4201), Koffer, Handtaschen oder andere Behältnisse der Position 4202; n) Flechtwaren und Korbmacherwaren des Kapitels 46; o) Wandverkleidungen der Position 4814; p) Erzeugnisse des Abschnitts XI (Spinnstoffe und Waren daraus); q) Waren des Abschnitts XII (z. B. Schuhe und Schuhteile, Kopfbedeckungen und Teile davon, Regenschirme, Sonnenschirme, Spazierstöcke, Peitschen, Reitpeitschen und Teile davon); r) Fantasieschmuck der Position 7117; s) Waren des Abschnitts XVI (Maschinen und Apparate, elektrotechnische Waren); t) Teile von Beförderungsmitteln des Abschnitts XVII; u) Waren des Kapitels 90 (z. B. optische Elemente, Brillenfassungen, Zeicheninstrumente); v) Waren des Kapitels 91 (z. B. Gehäuse für Uhren und andere Uhrmacherwaren); w) Waren des Kapitels 92 (z. B. Musikinstrumente und Teile davon); x) Waren des Kapitels 94 (z. B. Möbel, Leuchten und Beleuchtungskörper, Reklameleuchten, vorgefertigte Gebäude); y) Waren des Kapitels 95 (z. B. Spielzeug, Spiele, Sportgeräte); z) Waren des Kapitels 96 (z. B. Bürsten, Knöpfe, Reißverschlüsse, Kämme, Mundstücke und Rohre für Tabakpfeifen, Zigarettenspitzen oder dergleichen, Teile von Isolierflaschen, Kugelschreiber, Füllhalter, Drehbleistifte und Ein-, Zwei-, Dreibeinstative und ähnliche Waren). 3. Zu den Positionen 3901 bis 3911 gehören nur durch chemische Synthese hergestellte Erzeugnisse der folgenden Kategorien: a) flüssige synthetische Polyolefine, bei deren Destillation weniger als 60 RHT bis 300 °C übergehen, nach Umrechnung auf 1 013 mbar, wenn eine Vakuumdestillation durchgeführt wird (Positionen 3901 und 3902); b) niedrig polymerisierte Harze vom Cumaron-Inden-Typ (Position 3911); c) andere synthetische Polymere aus durchschnittlich fünf oder mehr monomeren Einheiten; d) Silicone (Position 3910); e) Resole (Position 3909) und andere Prepolymere. 4. Als „Copolymere“ gelten alle Polymere, bei denen keine einzelne Monomereinheit 95 GHT oder mehr zum Gesamtpolymergehalt beiträgt. Im Sinne des Kapitels 39 sind, wenn nichts anderes bestimmt ist, Copolymere (einschließlich Copolykondensate, Copolyadditionserzeugnisse, Blockcopolymere und Pfropfcopolymere) und Polymergemische der Position zuzuweisen, welche die Polymere derjenigen Comonomereinheit erfasst, die gewichtsmäßig gegenüber jeder anderen einzelnen Comonomereinheit überwiegt. Im Sinne dieser Anmerkung sind dabei die konstitutionellen Comonomereinheiten von Polymeren, die zur selben Position gehören, zusammenzuziehen. Wenn keine einzelne Comonomereinheit überwiegt, sind Copolymere oder Polymergemische der Letzten der in Betracht kommenden Position zuzuweisen. 5. Chemisch modifizierte Polymere — das sind solche, bei denen nur an den Seitengruppen der Hauptpolymerkette Änderungen durch chemische Reaktionen vorgenommen wurden — sind derjenigen Position zuzuweisen, die das nicht modifizierte Polymer erfasst. Diese Bestimmung gilt nicht für Pfropfcopolymere. 6. Als „Primärformen“ im Sinne der Positionen 3901 bis 3914 gelten nur folgende Formen: a) Flüssigkeiten und Pasten, einschließlich Dispersionen (Emulsionen und Suspensionen) und Lösungen; b) Blöcke von unregelmäßiger Form, Brocken, Krümel, Pulver (einschließlich Formmassen), Granulate, Flocken und ähnliche lose Formen. 7. Zu Position 3915 gehören nicht Abfälle, Schnitzel und Bruch eines einzelnen thermoplastischen Stoffes, die in Primärformen umgewandelt wurden (Positionen 3901 bis 3914). 8. Als „Rohre und Schläuche“ im Sinne der Position 3917 gelten Hohlprodukte, die Halb- oder Fertigerzeugnisse sind (z. B. gerippte Gartenschläuche, perforierte Rohre), wie sie üblicherweise zum Leiten, Befördern und Verteilen von Gasen oder Flüssigkeiten dienen. Diese Bezeichnungen erfassen auch schlauchförmige Wursthüllen und andere flachliegende Rohre und Schläuche. Mit Ausnahme der letztgenannten Erzeugnisse gelten jedoch solche mit einem anderen als runden, ovalen, rechteckigen (mit einer Länge von nicht mehr als dem 1,5fachen der Breite) oder ein regelmäßiges Vieleck aufweisenden Innenquerschnitt als Profile und nicht als Rohre oder Schläuche. 9. Als „Wand- oder Deckenverkleidungen aus Kunststoffen“ im Sinne der Position 3918 gelten zur Verschönerung von Wänden oder Decken geeignete Erzeugnisse in Rollen mit einer Breite von 45 cm oder mehr, die aus dauerhaft auf einem Träger aus anderen Stoffen als Papier befestigtem Kunststoff bestehen und deren Kunststoffschicht (auf der Schauseite) gemasert, geprägt, farbig gemustert, mit Motiven bedruckt oder anders verziert ist. 10. Als „Tafeln, Platten, Folien, Filme, Bänder und Streifen“ im Sinne der Positionen 3920 und 3921 gelten ausschließlich Tafeln, Platten, Folien, Filme, Bänder und Streifen (ausgenommen solche des Kapitels 54) und Blöcke von regelmäßiger geometrischer Form, auch bedruckt oder anders oberflächenbearbeitet, nicht geschnitten oder lediglich rechteckig oder quadratisch geschnitten (auch wenn sie dadurch den Charakter von Fertigwaren erhalten haben), aber nicht weiter bearbeitet. 11. Zu Position 3925 gehören nur die nachstehend aufgeführten Waren, soweit sie nicht in vorhergehenden Positionen des Teilkapitels II erfasst sind: a) Sammelbehälter, Tanks (einschließlich Klärtanks), Bottiche und ähnliche Behälter, mit einem Fassungsvermögen von mehr als 300 l; b) Bauelemente, wie sie z. B. zum Herstellen von Fußböden, Mauern, Trennwänden, Decken und Bedachungen verwendet werden; c) Regenrinnen und deren Zubehör; d) Türen, Fenster und deren Rahmen, Verkleidungen und Schwellen; e) Geländer, Zäune und ähnliche Absperrungen; f) Fensterläden, Jalousien (einschließlich Jalousetten) und ähnliche Waren, und deren Teile und Zubehör; g) große Regale, zur Montage und zum festen Einbau z. B. in Läden, Werkstätten oder Lagerräumen bestimmt; h) architektonische Ornamente, z. B. Kannelierungen, Gewölbe, Friese; ij) Beschläge und ähnliche Waren zur bleibenden Befestigung an Türen, Fenstern, Treppen, Wänden oder anderen Gebäudeteilen, z. B. Knöpfe, Griffe, Haken, Konsolen, Handtuchhalter, Schalterplatten und andere Abdeckplatten. Unterpositions-Anmerkungen 1. Innerhalb einer Position dieses Kapitels sind Polymere (einschließlich Copolymere) und chemisch modifizierte Polymere gemäß den folgenden Regeln einzureihen: a) Besteht eine Unterposition „andere“ in derselben Gliederungsstufe von Unterpositionen, gilt Folgendes: 1) Die dem Namen eines spezifischen Polymers in der Warenbezeichnung einer Unterposition angefügte Vorsilbe „Poly“ (z. B. Polyethylen oder Polyamid-6,6) bedeutet, dass die konstitutionelle Monomereinheit oder konstitutionellen Monomereinheiten des namentlich genannten Polymers zusammengenommen 95 GHT oder mehr zum Gesamtpolymergehalt beitragen müssen. 2) Die in den Unterpositionen 3901 30, 3901 40, 3903 20, 3903 30 und 3904 30 genannten Copolymere sind diesen Unterpositionen zuzuweisen, wenn die Comonomereinheiten der genannten Copolymere 95 GHT oder mehr zum Gesamtpolymergehalt beitragen. 3) Chemisch modifizierte Polymere sind in die Unterposition „andere“ einzureihen, vorausgesetzt, dass diese chemisch modifizierten Polymere nicht in einer anderen Unterposition genauer erfasst sind. 4) Polymere, die nicht die in den vorstehenden Absätzen 1), 2) oder 3) vorgegebene Beschaffenheit aufweisen, sind innerhalb derselben Gliederungsstufe von Unterpositionen in jene Unterposition einzureihen, die Polymere derjenigen Monomereinheit erfasst, die gewichtsmäßig gegenüber jeder anderen einzelnen Comonomereinheit überwiegt. Dabei sind konstitutionelle Monomereinheiten von Polymeren, die in dieselbe Unterposition fallen, zusammenzuziehen. Nur die konstitutionellen Comonomereinheiten von Polymeren derselben Gliederungsstufe von Unterpositionen sind miteinander zu vergleichen. b) Besteht keine Unterposition „andere“ in derselben Gliederungsstufe von Unterpositionen, so gilt Folgendes: 1) Polymere sind der Unterposition zuzuweisen, die Polymere derjenigen Monomereinheit erfasst, die gewichtsmäßig gegenüber jeder anderen einzelnen Comonomereinheit überwiegt. Dabei sind konstitutionelle Monomereinheiten von Polymeren, die in dieselbe Unterposition fallen, zusammenzuziehen. Nur die konstitutionellen Comonomereinheiten von Polymeren derselben Gliederungsstufe sind miteinander zu vergleichen. 2) Chemisch modifizierte Polymere sind der für das nicht modifizierte Polymer zutreffenden Unterposition zuzuweisen. Polymergemische sind derselben Unterposition zuzuweisen wie die aus denselben Monomereinheiten im selben Mengenverhältnis erhaltenen Polymere. 2. Im Sinne der Unterposition 3920 43 schließt der Begriff „Weichmacher“ auch die Sekundärweichmacher ein. Zusätzliche Anmerkung 1. In das Kapitel 39 gehören mit Zellkunststoff getränkte, bestrichene oder überzogene Fingerhandschuhe, Handschuhe ohne Fingerspitzen und Fausthandschuhe unabhängig davon, — ob sie aus mit Zellkunststoff getränkten, bestrichenen oder überzogenen Geweben, Gewirken, Gestricken (anderen als solchen der Position 5903), Filzen oder Vliesstoffen konfektioniert sind oder — aus nicht getränkten, bestrichenen oder überzogenen Geweben, Gewirken, Gestricken, Filzen oder Vliesstoffen konfektioniert und anschließend mit Zellkunststoff getränkt, bestrichen oder überzogen worden sind, sofern diese Gewebe, Gewirke, Gestricke, Filze oder Vliesstoffe nur der Verstärkung dienen (Anmerkung 3 c) zu Kapitel 56 und Anmerkung 2 a) Ziffer 5) zu Kapitel 59).

Anmerkungen zu Abschnitt VII

KUNSTSTOFFE UND WAREN DARAUS; KAUTSCHUK UND WAREN DARAUS Anmerkungen 1. Warenzusammenstellungen, die aus zwei oder mehreren voneinander getrennten Bestandteilen bestehen, von denen einige oder alle zu diesem Abschnitt gehören, und die erkennbar dazu bestimmt sind, durch Vermischen ein Erzeugnis des Abschnitts VI oder VII herzustellen, sind der für dieses Erzeugnis zutreffenden Position zuzuweisen unter der Voraussetzung, dass die Einzelbestandteile: a) ohne weiteres Umpacken aufgrund ihrer Aufmachung eindeutig erkennbar dazu bestimmt sind, zusammen verwendet zu werden, b) zusammen gestellt werden und c) entweder aufgrund ihrer Beschaffenheit oder ihrer entsprechenden Mengen als einander ergänzend erkennbar sind. 2. Mit Ausnahme der Waren der Position 3918 oder 3919 sind Kunststoffe, Kautschuk und Waren daraus, mit Motiven, Buchstaben oder bildlichen Darstellungen bedruckt, die im Hinblick auf den eigentlichen (ursprünglichen) Gebrauch der Waren nicht nur nebensächlich sind, dem Kapitel 49 zuzuweisen.

Weitere Erläuterungen zum Kapitel

Allgemeines Die Erläuterungen zu Kapitel 39 des HS, Allgemeines, ‚Kunststoffe in Verbindung mit anderen als textilen Stoffen‘, Buchstabe d, gelten sinngemäß für Kohlenstofffasern in Verbindung mit Kunststoffen.

Anmerkung 4: Berechnung der Massenverhältnisse von Monomereinheiten in Copolymeren: Die Massenverhältnisse der einzelnen Monomereinheiten in Copolymerketten werden auf der Grundlage der Molekularstruktur des Copolymers (nicht der Ausgangsstoffe) unter Berücksichtigung der Bildungsreaktion des Polymers berechnet. Soweit zutreffend, wird das Atom, das zwei benachbarte Monomereinheiten miteinander verbindet, der Monomereinheit zugeordnet, aus der das Atom stammt. Die folgenden Beispiele veranschaulichen die Berechnung des Monomereinheitsgehalts in Copolymeren: — In Polyethylenterephthalat, einem Polyester aus Teraphthalsäure und Ethylenglykolanteil-Einheiten, werden beide Sauerstoffatome der Glykolmonomereinheit zugeordnet. Ethylenglycol wird daher als C2H4O2 und Terephthalat als C8H4O2 berechnet. — In Polyamid-6,6, einem Polyamid aus Hexamethylendiamin und Adipinsäure, werden beide Stickstoffatome der Diamin-Monomereinheit zugeordnet. Hexamethylendiamin wird daher als C6H14N2 und Adipinsäure als C6H8O2 berechnet.

Anmerkung 6 Die in dieser Anmerkung und in Anmerkung 4 zu Kapitel 32 verwendete Bezeichnung „Lösungen“ umfasst nicht kolloide Lösungen.

Quellen: Kombinierte Nomenklatur 2026, Anhang I der Verordnung (EWG) Nr. 2658/87 (CELEX 32025R1926), und die Erläuterungen zur Kombinierten Nomenklatur (CELEX 02019XC0329(02)-20260213). Die Abschnitts- und Kapitelanmerkungen sind rechtsverbindlich, die Erläuterungen sind Auslegungshilfen. EUR-Lex

Britische verbindliche Zolltarifauskünfte zu 3926300040

Auskünfte von HM Revenue & Customs für Waren, deren britischer Warencode so beginnt wie dieser EU-Code. Der britische Zolltarif weicht vom EU-Tarif ab, für die EU sind sie daher nur eine Orientierung.

  • UK 3926300090 Gültig vom 27.01.2026 bis 26.01.2029 · Auskunft 600014425 auf GOV.UK

    A tie down strap made of polyethylene terephthalate (polyester). It has a clip and is used in an automobile for positioning interior trim components like glove box, console lid, sun visor and side trim retention. There are 1000 pieces in one carton.

    Begründung

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) GIR 1 has been used to classify this product by the terms of heading 3926 - Other articles of plastics and articles of other materials of heading 3901 to 3914. GIR 5 (b) has been used to identify the type of packaging. GIR 6 has been used to classify the goods to subheading level - 392630 - fittings for furniture, coachwork or the like 10-digit code - 3926300090 other than specified elsewhere in this heading Also classified in accordance with: Section Note 2(b) of Heading 8708 Harmonised System Explanatory Notes (HSENs) to Heading 3926

Quelle: HM Revenue & Customs, Advance Tariff Rulings. Enthält Informationen des öffentlichen Sektors unter der Open Government Licence v3.0.

Beschränkungen und Hinweise für 3926300040

  • Russland-Sanktionen: Einfuhrverbot Verordnung (EU) Nr. 833/2014, Anhang XXI 3926

    Art. 3i, Güter, die Russland erhebliche Einnahmen verschaffen

    Rechtsakt auf EUR-Lex lesen

Nur zur Orientierung. Prüfen Sie den Rechtsakt, bevor Sie sich auf einen Hinweis verlassen; Schwellenwerte, Ausnahmen und Genehmigungen sind nicht vollständig abgebildet.

EU-Handel 2025 für 3926300040

Einfuhren aus Drittländern
497,3 Mio. €
33.312 t
Ausfuhren in Drittländer
853,7 Mio. €

Wichtigste Ursprungsländer nach Einfuhrwert

  1. China 208 Mio. €
  2. Türkei 52,3 Mio. €
  3. Vereinigtes Königreich 40,5 Mio. €
  4. Südkorea 34,1 Mio. €
  5. Japan 25,7 Mio. €

Werte für den KN8-Code 39263000. Quelle: Eurostat, Comext, CC BY 4.0, aufbereitet von hscode.info. Vertraulicher Handel ist keinen Codes zugeordnet.

Tarifänderungen für 3926300040 seit 2016

  • Juli 2019 3926300040 Code eingeführt

Monatlicher Vergleich der TARIC-Auszüge der Europäischen Kommission. Ohne saisonale Einfuhrpreise.

Einfuhrzoll im Vereinigten Königreich für 392630

  • 6%

Drittlandszollsätze aller britischen Warencodes unter dieser HS-Unterposition. Quelle: UK Department for Business and Trade, Stand 02.11.2026. Der britische Tarif weicht vom EU-Tarif ab.

Einfuhrumsatzsteuer in der EU

  • Belgien 21 %
  • Bulgarien 20 %
  • Dänemark 25 %
  • Deutschland 19 %
  • Estland 24 % ggf. 9 %
  • Finnland 25,5 %
  • Frankreich 20 %
  • Griechenland 24 % ggf. 6 %, 13 %
  • Irland 23 %
  • Italien 22 %
  • Kroatien 25 %
  • Lettland 21 %
  • Litauen 21 %
  • Luxemburg 17 %
  • Malta 18 %
  • Niederlande 21 %
  • Österreich 20 %
  • Polen 23 %
  • Portugal 23 %
  • Rumänien 21 %
  • Schweden 25 %
  • Slowakei 23 %
  • Slowenien 22 %
  • Spanien 21 %
  • Tschechien 21 %
  • Ungarn 27 %
  • Zypern 19 %

Normalsatz je Mitgliedstaat auf Zollwert, Zoll und Transportkosten bis zum Bestimmungsort. Ermäßigte Sätze hängen oft von Verwendung oder Abnehmer ab und gelten nur, wenn das Land sie für die Ware vorsieht. Quelle: Europäische Kommission, Taxes in Europe Database, Stand 02.11.2026.

Ursprungsregeln

Die Präferenzursprungsregeln für die Unterposition 392630 hängen vom Handelsabkommen ab. Die Kommission veröffentlicht sie in Access2Markets.

Ursprungsregeln bei Access2Markets

Informationen

Wenn Sie "Innerer Türgriff aus Kunststoff zur Verwendung bei der Herstellung von Kraftfahrzeugen" importieren oder exportieren, ist es wichtig, den richtigen HS-Code oder TARIC-Code zu haben. Der HS-Code 3926300040 80 ist der Standardcode für dieses Produkt und stellt sicher, dass die richtigen Zölle und Abgaben bei einer Überquerung internationaler Grenzen angewendet werden.

Um sicherzustellen, dass Ihre Geschäftsabwicklung bei der Einfuhr oder Ausfuhr von "Innerer Türgriff aus Kunststoff zur Verwendung bei der Herstellung von Kraftfahrzeugen" reibungslos verläuft, sollten Sie folgende Punkte beachten:

  1. Informieren Sie sich über die spezifischen Einfuhr- und Ausfuhrbestimmungen in den beteiligten Ländern. Dazu gehören mögliche Beschränkungen, Steuern und Zölle, die auf "Innerer Türgriff aus Kunststoff zur Verwendung bei der Herstellung von Kraftfahrzeugen" anwendbar sind.
  2. Prüfen Sie, ob zusätzliche Lizenzen, Genehmigungen oder Zertifikate erforderlich sind, um "Innerer Türgriff aus Kunststoff zur Verwendung bei der Herstellung von Kraftfahrzeugen" in das Zielland zu importieren oder aus dem Herkunftsland zu exportieren.
  3. Achten Sie darauf, dass Ihre Handelspartner über gültige Identifikationsnummern verfügen, wie zum Beispiel die EORI-Nummer (Economic Operators Registration and Identification) in der EU, um den Handel effizienter zu gestalten und Verzögerungen zu minimieren.
  4. Stellen Sie sicher, dass alle handels- und zollrelevanten Dokumente (wie Handelsrechnungen, Packlisten, Ursprungszertifikate und Versicherungspolicen) korrekt ausgefüllt sind und den jeweiligen nationalen Vorschriften entsprechen.
  5. Behalten Sie die aktuellen Wechselkurse sowie die Kosten für Verpackung, Versand und Versicherung im Blick, um eine genaue Kalkulation der Handelskosten durchzuführen.

Zusammenfassend lautet der HS-Code oder TARIC-Code für "Innerer Türgriff aus Kunststoff zur Verwendung bei der Herstellung von Kraftfahrzeugen" 3926300040 80. Stellen Sie sicher, dass Sie diesen Code in all Ihren Handels- und Zolldokumenten korrekt verwenden, um eine reibungslose und problemlose Transaktion zu gewährleisten. Mit diesen Tipps sind Sie besser auf die Herausforderungen im internationalen Handel vorbereitet und können erfolgreich "Innerer Türgriff aus Kunststoff zur Verwendung bei der Herstellung von Kraftfahrzeugen" importieren und exportieren.

HS-Code Struktur

39
HS Kapitel
26
HS Position
30
HS Unterposition
00
KN Position
40
TARIC Unterposition
80
Zusätzliche TARIC Codes

1. HS Kapitel

Es gibt 21 unterschiedliche Abschnitte, die in 96 Kapitel unterteilt sind. Ausnahmekapitel beinhalten Kapitel 77, welches für zukünftige Nutzung reserviert ist, Kapitel 98 und 99, die auf nationaler Ebene begrenzt sind, und Kapitel 99, welches ein spezifischer Code für temporäre Änderungen ist. Im obigen Beispiel wurde Kapitel 39 ausgewählt, für kunststoffe und waren daraus

2. HS Position

Die Überschrift bestimmt die spezifische Kategorie innerhalb eines bestimmten Kapitels. Im obigen Beispiel bezieht sich die 26 auf Andere Waren aus Kunststoffen und Waren aus anderen Stoffen der Positionen 3901 bis 3914.

3. HS Unterposition

Die letzten beiden Ziffern des internationalen Harmonisierten Codes sind spezifischer und definieren Unterkategorien von Produkten. Im obigen Beispiel bezieht sich die 30 auf Innerer Türgriff aus Kunststoff zur Verwendung bei der Herstellung von Kraftfahrzeugen.

HS-Code Baumstruktur

3900000000 80

HS Kapitel KUNSTSTOFFE UND WAREN DARAUS

3926000000 80

Andere Waren aus Kunststoffen und Waren aus anderen Stoffen der Positionen 3901 bis 3914

3926100000 80

- Büro- oder Schulartikel

3926200000 80

- Kleidung und Bekleidungszubehör (einschließlich Fingerhandschuhe, Handschuhe ohne Fingerspitzen und Fausthandschuhe)

3926300000 80

- Beschläge für Möbel, Karosserien und dergleichen

3926300040 80

- - Innerer Türgriff aus Kunststoff zur Verwendung bei der Herstellung von Kraftfahrzeugen

3926300050 80

- - Überzogene Interieur- und Exterieurteile zur Dekoration, bestehend aus -einem Acrylnitril-Butadien-Styrol-Copolymer (ABS), auch mit Polycarbonat gemischt, und -einer PVC-Folie, -keine Kupfer-, Nickel- oder Chromschichten enthaltend, zur Verwendung bei der Herstellung von Teilen für Kraftfahrzeuge der Positionen 8701 bis 8705

3926300090 80

- - andere

3926400000 80

- Statuetten und andere Ziergegenstände

3926900000 80

- andere

3926905000 80

- - Schmutzkörbe und ähnliche Abwassersiebe, für Kanalisationsabflüsse

3926906000 80

- - Gesichtsschutzschirme/Visiere

3926909700 80

- - andere

3926909705 80

- - - Waren des technischen Bedarfs, für zivile Luftfahrzeuge

3926909710 80

- - - Mikrokügelchen aus einem Divinylbenzol-Polymer, mit einem Durchmesser von 4,5 µm oder mehr, jedoch nicht mehr als 80 µm

3926909722 80

- - - Dichtungen aus Polyethylenschaum für Spiegel von Straßenfahrzeugen und ihre Bestandteile, im Thermoformverfahren hergestellt, mit: -einer Dichte von 20 kg/m³ oder mehr, jedoch nicht mehr als 40 kg/m³, -einer Zugfestigkeit von mindestens 170 kPa, -einem Wasseraufnahmekoeffizienten von nicht mehr als 1 %, -einer Länge von 5 mm oder mehr, jedoch nicht mehr als 300 mm, -einer Höhe von 10 mm oder mehr, jedoch nicht mehr als 400 mm, -einer Tiefe von 5 mm oder mehr, jedoch nicht mehr als 250 mm

3926909723 80

- - - Kunststoffabdeckung mit Halterungen für Außenrückspiegel von Kraftfahrzeugen

3926909727 80

- - - Dichtung aus Polyethylenschaum zum Füllen der Lücke zwischen der Karosserie eines Kraftfahrzeugs und dem Fuß eines Rückspiegels

3926909730 80

- - - Teile von Frontabdeckungen für Autoradios und Pkw-Klimaanlagen, - aus Acrylnitril-Butadien-Styrol mit oder ohne Polycarbonat, - beschichtet mit einer Kupfer-, einer Nickel- und einer Chromschicht, - mit einer Gesamtdicke der Beschichtung von 5,54 μm oder mehr, jedoch nicht mehr als 49,6 µm

3926909733 80

- - - Gehäuse, Gehäuseteile, Walzen, Stellräder, Rahmen, Abdeckungen, Oberteile, Gestaltungsplatten und andere Teile aus Acrylnitril-Butadien-Styrol, Polycarbonat, Polymethylmethacrylat oder thermoplastischem Polyurethan, von der zur Herstellung von Fernbedienungen verwendeten Art

3926909740 80

- - - Silikonhüllen für Brustimplantate

3926909743 80

- - - Mischung aus Wasser und 19 GHT oder mehr, jedoch nicht mehr als 35 GHT expandierten hohlen Mikrokügelchen aus einem Copolymer aus Acrylnitril, Methacrylnitril und Isobornylmethacrylat oder einem anderen Methacrylat, mit einem Durchmesser von 3 µm oder mehr, jedoch nicht mehr als 4,95 µm

3926909748 80

- - - Überzogene Interieur- und Exterieurteile zur Dekoration, bestehend aus -einem Acrylnitril-Butadien-Styrol-Copolymer (ABS), auch mit Polycarbonat gemischt, und -einer PVC-Folie, -keine Kupfer-, Nickel- oder Chromschichten enthaltend, zur Verwendung bei der Herstellung von Teilen für Kraftfahrzeuge der Positionen 8701 bis 8705

3926909758 80

- - - Ferrule und/oder Stopfen aus Kunststoff: -auch gestützt durch einen Ring aus nicht rostendem Stahl, -geeignet für einen maximalen Betriebsdruck von mindestens 2,7 MPa, jedoch nicht mehr als 114 MPa, für Rohre: -mit einem Außendurchmesser von 0,33 mm oder mehr, jedoch nicht mehr als 3,3 mm, -geeignet für einen maximalen Betriebsdruck von mindestens 2,7 MPa, jedoch nicht mehr als 114 MPa, -geeignet für alle Lösungen, die bei der Chromatografie verwendet werden, zur Verwendung bei der Herstellung von chromatografischen Systemen

3926909760 80

- - - Präservative aus Polyurethan

3926909777 80

- - - Silicon-Entkopplungsring mit einem Innendurchmesser von 13,2 mm oder mehr, jedoch nicht mehr als 17,2 mm, in unmittelbaren Umschließungen von 2 500 Stück oder mehr, von der in Einparkhilfen-Sensorsystemen für Kraftfahrzeuge verwendeten Art

3926909790 80

- - - andere