Import Handelsbeschränkungen für 7307000000 80
Diese Tabelle enthält Informationen zu den Handelsbeschränkungen für den Import von Waren in die EU und die EU in Drittländer. Die Tabelle enthält Informationen zu den Handelsbeschränkungen, die aufgrund von Zollunionen, Präferenzen, Tarifquoten, Zollunionen, Veterinärkontrollen, Drittländerzöllen und Nicht-Präferenz-Tarifquoten erhoben werden.
| Ursprungsland | Start | Zoll / Steuer | Rechtsgrundlage Maßnahmetyp | |
|---|---|---|---|---|
| Faroe Islands FO | 01-01-1997 | 0 % | Tarifpräferenz 142 | |
| San Marino SM | 01-01-2006 | 0 % | Zollunion-Zoll 106 | |
| EU-Switzerland agreement: re-imported goods 1007 | 01-01-2007 | 0 % | Tarifpräferenz 142 | |
2020 | GSP - General arrangements 2020 | 01-01-2017 | 0 % | Tarifpräferenz 142 |
| Ecuador EC | 01-01-2017 | 0 % | Tarifpräferenz 142 | |
2080 | OCTs (Overseas Countries and Territories) 2080 | 01-01-2021 | 0 % | Tarifpräferenz 142 |
| Viet Nam VN | 01-08-2020 | 0 % | Tarifpräferenz 142 | |
| Georgia GE | 01-09-2014 | 0 % | Tarifpräferenz 142 | |
| Syria SY | 01-11-1978 | 0 % | Tarifpräferenz 142 | |
1011 | ERGA OMNES 1011 | 01-11-2018 | 0 % | Lufttüchtigkeit Tarifsperre 119 |
1011 | ERGA OMNES 1011 | 01-11-2026 | 3 EUR | Low-value consignment customs duty 107 |
| Switzerland CH | 07-12-2003 | 0 % | Tarifpräferenz 142 | |
| South Africa ZA | 10-10-2016 | 0 % | Tarifpräferenz 142 | |
| Andorra AD | 01-01-2006 | 0 % | Zollunion-Zoll 106 | |
2005 | GSP-EBA (Special arrangement for the least-developed countries - Everything But Arms) 2005 | 01-01-2014 | 0 % | Tarifpräferenz 142 |
2027 | GSP+ (incentive arrangement for sustainable development and good governance) 2027 | 01-01-2014 | 0 % | Tarifpräferenz 142 |
| Moldova, Republic of MD | 01-01-2016 | 0 % | Tarifpräferenz 142 | |
| United Kingdom GB | 01-01-2021 | 0 % | Tarifpräferenz 142 | |
| Ghana GH | 01-01-2027 | 0 % | Tarifpräferenz 142 | |
| Singapore SG | 01-01-2027 | 0 % | Tarifpräferenz 142 | |
| Chile CL | 01-02-2025 | 0 % | Tarifpräferenz 142 | |
| Tunisia TN | 01-03-1998 | 0 % | Tarifpräferenz 142 | |
| Morocco MA | 01-03-2000 | 0 % | Tarifpräferenz 142 | |
| Lebanon LB | 01-04-2006 | 0 % | Tarifpräferenz 142 | |
| Jordan JO | 01-05-2002 | 0 % | Tarifpräferenz 142 | |
| Egypt EG | 01-06-2004 | 0 % | Tarifpräferenz 142 | |
2012 | EEA - European Economic Area 2012 | 01-07-2007 | 0 % | Tarifpräferenz 142 |
| Korea, Republic of (South Korea) KR | 01-07-2011 | 0 % | Tarifpräferenz 142 | |
| Mexico MX | 01-07-2016 | 0 % | Tarifpräferenz 142 | |
| Kenya KE | 01-07-2024 | 0 % | Tarifpräferenz 142 | |
| United States US | 01-07-2026 | 0 % | Tarifpräferenz 142 | |
2200 | Central America 2200 | 01-08-2013 | 0 % | Tarifpräferenz 142 |
| Colombia CO | 01-08-2013 | 0 % | Tarifpräferenz 142 | |
| Algeria DZ | 01-09-2005 | 0 % | Tarifpräferenz 142 | |
1011 | ERGA OMNES 1011 | 01-11-2026 | 2 EUR | Union handling fee 800 |
| Ivory Coast CI | 02-12-2019 | 0 % | Tarifpräferenz 142 | |
2000 | Preferential origin in accordance with the Agreement in the form of an Exchange of Letters between the European Union and the Kingdom of Morocco on the amendment of Protocols 1 and 4 to the Euro-Mediterranean Agreement establishing an association between the European Communities and their Member States, of the one part, and the Kingdom of Morocco, of the other part. 2000 | 03-10-2025 | 0 % | Tarifpräferenz 142 |
| Cameroon CM | 04-08-2014 | 0 % | Tarifpräferenz 142 | |
| Belarus BY | 05-06-2022 | Importverbot 277 | ||
XL | Melilla XL | 07-12-2003 | 0 % | Zugangsakt0001/85 Tarifpräferenz 142 |
XC | Ceuta XC | 07-12-2003 | 0 % | Zugangsakt0001/85 Tarifpräferenz 142 |
| Occupied palestinian Territory PS | 07-12-2003 | 0 % | Tarifpräferenz 142 | |
1035 | SADC EPA 1035 | 10-10-2016 | 0 % | Tarifpräferenz 142 |
1034 | Eastern and Southern Africa States 1034 | 14-05-2012 | 0 % | Tarifpräferenz 142 |
| Ghana GH | 15-12-2016 – 31-12-2026 | 0 % | Tarifpräferenz 142 | |
| Israel IL | 16-05-2023 | 0 % | Tarifpräferenz 142 | |
| Solomon Islands SB | 17-05-2020 | 0 % | Tarifpräferenz 142 | |
| Papua New Guinea PG | 20-12-2009 | 0 % | Tarifpräferenz 142 | |
| Singapore SG | 21-11-2019 – 31-12-2026 | 0 % | Tarifpräferenz 142 | |
| Fiji FJ | 28-07-2014 | 0 % | Tarifpräferenz 142 | |
1033 | CARIFORUM 1033 | 29-12-2008 | 0 % | Tarifpräferenz 142 |
| Samoa WS | 31-12-2018 | 0 % | Tarifpräferenz 142 |
| Ursprungsland | Start | Zoll / Steuer | Rechtsgrundlage Maßnahmetyp | |
|---|---|---|---|---|
1008 | All third countries 1008 | 01-01-2026 – 31-12-2026 | Dokument nötig ohne Dokument verboten | Carbon Border Adjustment Mechanism - CBAM 775 |
| Russian Federation RU | 19-12-2023 – 31-12-2027 | Dokument nötig ohne Dokument verboten | Importkontrolle 763 | |
1008 | All third countries 1008 | 19-12-2023 – 31-12-2027 | Dokument nötig ohne Dokument verboten | Importkontrolle 763 |
| Ukraine UA | 24-06-2026 | Dokument nötig ohne Dokument verboten | Importkontrolle 762 | |
| Ukraine UA | 24-06-2026 | Dokument nötig ohne Dokument verboten | Importkontrolle 760 |
Erklärung der Handelsbeschränkungen
Erga Omnes bedeutet "für alle".
Drittländer sind Länder, die nicht der EU angehören.
GSP bedeutet "Generalised System of Preferences".
GSP Plus bedeutet "Generalised System of Preferences Plus".
European Economic Area (EEA) bedeutet alle EU-Mitgliedstaaten und Island, Liechtenstein und Norwegen.
OCTs steht für "Overseas Countries and Territories". Es sind Länder und Gebiete, die nicht der EU angehören. Mehr Informationen
CARIFORUM ist eine regionale Wirtschaftsintegrationsorganisation, die 15 Mitgliedstaaten der Karibischen Gemeinschaft (CARICOM) und die Dominikanische Republik umfasst.
SADC EPA steht für "Southern African Development Community - Economic Partnership Agreement".
Zoll bedeutet "Zollabgaben".
Einfuhrkosten für 7307000000 schätzen
- Zollwert 1.000,00 €
- Für dieses Ursprungsland ist kein Drittlandszoll erfasst.
- Einfuhrumsatzsteuer 19 % 190,00 €
- Summe 1.190,00 €
Kann unter Bedingungen niedriger sein:
- Airworthiness tariff suspension: 0 %
Dokumente und Kontrollen für China
Nur eine Schätzung. Der Zollwert ist der Preis einschließlich Transport und Versicherung bis zur EU-Grenze. Verbrauchsteuern, andere Gebühren und herstellerbezogene Antidumpingzölle sind nicht berücksichtigt. Präferenzsätze gelten nur mit gültigem Ursprungsnachweis. Länderzugehörigkeit und Ausnahmen: TARIC, Stand November 2026.
Ausfuhrmaßnahmen für 7307000000
Was gilt, wenn diese Waren die EU verlassen: Ausfuhrkontrollen, Dual-Use- und andere Genehmigungen, Verbote je Bestimmungsland und die besondere Maßeinheit der Ausfuhranmeldung.
| Bestimmungsland | Start | Zoll / Steuer | Rechtsgrundlage Maßnahmetyp | |
|---|---|---|---|---|
| North Korea (Democratic People’s Republic of Korea) KP | 28-02-2018 | Export prohibition 278 |
| Bestimmungsland | Start | Zoll / Steuer | Rechtsgrundlage Maßnahmetyp | |
|---|---|---|---|---|
| Belarus BY | 25-02-2025 | Dokument nötig ohne Dokument verboten | Export control 766 | |
| Ukraine UA | 25-02-2025 | Dokument nötig ohne Dokument verboten | Export control 709 | |
| Ukraine UA | 25-08-2022 | Dokument nötig ohne Dokument verboten | Export control 767 |
Geschichte
Zollsätze und Maßnahmen für diesen Code im Zeitverlauf (Jahresstände).
Präferenzursprungsregeln für 7307000000
Was eine Ware erfüllen muss, um als Ursprungsware eines Partnerlandes zu gelten und den Präferenzzoll zu erhalten, je Abkommen. Wortlaut der Abkommen auf Englisch.
Autonomous Trade Preferences (Western Balkans) · Kosovo
EU-Chile Association Agreement · Chile
EU-Algeria Association Agreement · Algerien
EEA/EFTA agreements (Switzerland, Norway, Liechtenstein, Faroe Islands) · Färöer, Liechtenstein, Norwegen, Schweiz
EU-Egypt Association Agreement · Ägypten
EU-Georgia DCFTA · Georgien
EU-Iceland FTA · Island
EU-Jordan Association Agreement · Jordanien
EU-Central America Association Agreement
EU-Lebanon Association Agreement · Libanon
EU-Morocco Association Agreement · Marokko
EU-Moldova DCFTA · Republik Moldau
Pan-Euro-Mediterranean (PEM) Convention · Ägypten, Albanien, Andorra, Bosnien und Herzegowina, Färöer, Island, Kosovo, Liechtenstein, Montenegro, Nordmazedonien, Norwegen, Palästina, Schweiz, Türkei
EU-Singapore FTA · Singapur
EU-Tunisia Association Agreement · Tunesien
EU-Ukraine DCFTA · Ukraine
Tube or pipe fittings of stainless steel (ISO No X5CrNiMo 1712), consisting of several parts / or: Turning, drilling, reaming, threading, deburring and sandblasting of forged blanks, provided that the total value of the forged blanks used does not exceed 35 % of the ex-works price of the product
EPA CARIFORUM
EU Market Access Regulation (EPA) · Côte d’Ivoire, Ghana, Kamerun, Kenia
EPA Pacific · Fidschi, Papua-Neuguinea, Salomonen, Samoa
EU-Israel Association Agreement · Israel
EU-Mexico Global Agreement · Mexiko
Tube or pipe fittings of stainless steel (ISO No X5CrNiMo 1712), consisting of several parts / or: Turning, drilling, reaming, threading, deburring and sandblasting of forged blanks the value of which does not exceed 35 % of the ex-works price of the product
Generalised Scheme of Preferences (GSP, GSP+, EBA) · Armenien, Indien, Kenia, Pakistan, Salomonen, Samoa, Syrien, Vietnam
EU-Jordan Association Agreement (relaxed rules, 2016) · Jordanien
Tube or pipe fittings of stainless steel / or: Turning, drilling, reaming, threading, deburring and sandblasting of forged blanks, provided that the total value of the forged blanks used does not exceed 35 % of the ex-works price of the product
EU-Colombia/Peru/Ecuador Trade Agreement · Ecuador, Kolumbien, Peru
Tube or pipe fittings of stainless steel (ISO No X5CrNiMo 1712), consisting of several parts / or: Turning, drilling, reaming, threading, deburring and sandblasting of forged blanks, provided that the total value of the forged blanks used does not exceed 35 per cent of the ex-works price of the product
EPA Eastern and Southern Africa
Structures (excluding prefabricated buildings of heading No 9406) and parts of structures (for example, bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frame-works, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns), of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel / or: Manufacture in which all the materials used are classified within a heading other than that of the product. However, welded angles, shapes and sections of heading No 7301 may not be used
EU-Korea FTA · Südkorea
Articles of iron or steel; except for: / or: Manufacture from materials of any heading, except that of the product
EU-Palestine Interim Association Agreement · Palästina
Tube or pipe fittings of stainless steel (ISO No X5CrNiMo 1712), consisting of several parts / or: Turning, drilling, reaming, threading, deburring and sandblasting of forged blanks the value of which does not exceed 35% of the ex-works price of the product
EPA SADC · Südafrika
Tube or pipe fittings of stainless steel (ISO No X5CrNiMo 1712), consisting of several parts / or: Turning, drilling, reaming, threading, deburring and sandblasting of forged blanks the value of which does not exceed 35 % of the ex–works price of the product
EU-Viet Nam FTA · Vietnam
tube or pipe fittings of stainless steel (ISO No X5CrNiMo 1712), consisting of several parts; and / or: Turning, drilling, reaming, threading, deburring and sandblasting of forged blanks, provided that the total value of the forged blanks used does not exceed 35 % of the ex-works price of the product.
Quelle: Europäische Kommission, Access2Markets (CC BY 4.0, gekürzt). Maßgeblich ist der Text des Abkommens. Access2Markets
Anmerkungen und Erläuterungen zu 7307000000
7307 11 10 Erläuterungen zur Kombinierten Nomenklatur: und 7307 11 90
aus nicht verformbarem Gusseisen Der Begriff „nicht verformbares Gusseisen“ umfasst auch Gusseisen mit Lamellengrafit. Hierher gehören Rohrform-, Rohrverschluss- oder Rohrverbindungsstücke wie z. B. Bogen, Winkel, Flansche, T-Stücke. Sie werden mit den Guss- oder Stahlrohren entweder zusammengeschraubt oder durch Druckkontakte verbunden.
7307 11 90 Erläuterungen zur Kombinierten Nomenklatur: und 7307 11 90
aus nicht verformbarem Gusseisen Der Begriff „nicht verformbares Gusseisen“ umfasst auch Gusseisen mit Lamellengrafit. Hierher gehören Rohrform-, Rohrverschluss- oder Rohrverbindungsstücke wie z. B. Bogen, Winkel, Flansche, T-Stücke. Sie werden mit den Guss- oder Stahlrohren entweder zusammengeschraubt oder durch Druckkontakte verbunden.
7307 23 10 Erläuterungen zur Kombinierten Nomenklatur: Bogen und Winkel
Hierher gehören hauptsächlich Bogen und Winkel mit gleich bleibender Wanddicke über das gesamte Stück, die in der ISO-Norm 3419-1981 und in den entsprechenden nationalen Normen beschrieben sind. Ihre Enden sind rechtwinklig abgeschnitten und bei Erzeugnissen mit dickerer Wandung an beiden Enden abgeschrägt, um das Zusammenschweißen mit den Rohren zu erleichtern. Bogen haben eine Krümmung von 45° oder 90°; Winkel eine solche von 180°. Hierher gehören auch aus Rohren gewölbte Bogen und Winkel mit nicht gleich bleibender Wanddicke, die im Innern der Wölbung Falten aufweisen können.
7307 23 90 Erläuterungen zur Kombinierten Nomenklatur: andere
Hierher gehören hauptsächlich T-Stücke und Kreuzstücke mit gleichen oder ungleichen Öffnungen, Manschetten, Verschlussstücke, konzentrische oder exzentrische Verjüngungen, die in der ISO-Norm 3419-1981 und in den entsprechenden nationalen Normen beschrieben sind. Wegen der Behandlung der Enden siehe die Erläuterungen zu Unterposition 7307 23 10.
7307 93 11 Erläuterungen zur Kombinierten Nomenklatur: Bogen und Winkel
Siehe die Erläuterungen zu Unterposition 7307 23 10.
7307 93 19 Erläuterungen zur Kombinierten Nomenklatur: andere
Siehe die Erläuterungen zu Unterposition 7307 23 90.
7307 93 91 Erläuterungen zur Kombinierten Nomenklatur: Bogen und Winkel
Siehe die Erläuterungen zu Unterposition 7307 23 10.
7307 93 99 Erläuterungen zur Kombinierten Nomenklatur: andere
Siehe die Erläuterungen zu Unterposition 7307 23 90.
Anmerkungen zu Kapitel 73
Anmerkungen 1. Als „Gusseisen“ im Sinne des Kapitels 73 gelten durch Gießen hergestellte Erzeugnisse, deren chemische Zusammensetzung nicht der für Stahl nach Anmerkung 1 d) zu Kapitel 72 entspricht und in denen Eisen gegenüber jedem anderen Element gewichtsmäßig vorherrscht. 2. Als „Draht“ im Sinne des Kapitels 73 gelten warm- oder kalthergestellte Erzeugnisse mit beliebiger Form des Querschnitts, dessen größte Abmessung 16 mm oder weniger beträgt.
Quellen: Kombinierte Nomenklatur 2026, Anhang I der Verordnung (EWG) Nr. 2658/87 (CELEX 32025R1926), und die Erläuterungen zur Kombinierten Nomenklatur (CELEX 02019XC0329(02)-20260213). Die Abschnitts- und Kapitelanmerkungen sind rechtsverbindlich, die Erläuterungen sind Auslegungshilfen. EUR-Lex
EU-Einreihungsverordnungen zu 7307000000
Verordnungen der Kommission, die bestimmte Waren in diesen Code eingereiht haben. Sie binden den Zoll in allen Mitgliedstaaten für gleiche Waren.
- 7307 93 19 05.01.2015 · Verordnung auf EUR-Lex
T-förmige Ware aus Stahl. Der äußere Durchmesser der Schenkel beträgt 23 mm und der größte Durchmesser des Mittelstücks 40 mm. Die Enden der Schenkel sind abgeschrägt und zum Stumpfschweißen geeignet, das Ende des Mittelstücks ist auf der Innenseite mit einem Gewinde versehen.
Die Enden der Schenkel sind dazu bestimmt, zwischen Heizkörperplatten geschweißt zu werden. An das dritte Ende wird entweder ein Entlüftungsventil oder ein Regelventil montiert oder es wird an ein Rohr angeschlossen, das den Heizkörper beispielsweise mit einem Boiler verbindet. Siehe Abbildung (*1).
Begründung
Einreihung gemäß den Allgemeinen Vorschriften 1 und 6 für die Auslegung der Kombinierten Nomenklatur, Anmerkung 2 a zu Abschnitt XV sowie nach dem Wortlaut der KN-Codes 7307 , 7307 93 und 7307 93 19 . Die Ware weist die objektiven Merkmale von Rohrformstücken, Rohrverschlussstücken und Rohrverbindungsstücken der Position 7307 auf. Waren der Position 7307 sind gemäß Anmerkung 2 a zu Abschnitt XV Teile mit allgemeiner Verwendungsmöglichkeit. Da sich die Bezeichnung „Teile“ u. a. in Kapitel 73 nicht wie in dieser Anmerkung definiert auf „Teile mit allgemeiner Verwendungsmöglichkeit“ bezieht, ist eine Einreihung der Ware in die Position 7322 als Teil von Heizkörpern für Zentralheizungen ausgeschlossen (siehe auch HS-Erläuterungen zu Position 7322 , Nummer 2 a). Die Ware ist daher in den KN-Code 7307 93 19 als andere Rohrformstücke, Rohrverschlussstücke und Rohrverbindungsstücke aus Stahl, zum Stumpfschweißen, mit einem größten äußeren Durchmesser von 609,6 mm oder weniger einzureihen.
Britische verbindliche Zolltarifauskünfte zu 7307000000
Auskünfte von HM Revenue & Customs für Waren, deren britischer Warencode so beginnt wie dieser EU-Code. Der britische Zolltarif weicht vom EU-Tarif ab, für die EU sind sie daher nur eine Orientierung.
- UK 7307111000 Gültig vom 22.08.2025 bis 21.08.2028 · Auskunft 600013365 auf GOV.UK
This product is a mechanical compression joint with a body and nut made of ductile non-malleable iron, thrust washer made of steel, end load washer made of spring steel, and a gasket made of rubber. The fitting has a closed body to effectively seal the end of a plain, unthreaded steel pipe or service. The compression joint is suitable for low and medium pressure installations. The compression joint has corrosion protection made of light oil film. The product provides a high strength transition fitting for a polyethylene gas service pipe to a plain ended Steel pipe for below ground installations, also available for Steel to Steel pipe connections without threading.
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify the product to heading 7307 - Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel GIR 6 has been used to classify the goods to subheading level 730711 - Cast fittings; Of non-malleable cast iron Eight digit code 73071110 - Of a kind used in pressure systems Also classified in accordance with: Note 3 to Section XV Harmonised System Explanatory Notes (HSENs) to heading 7307
- UK 7307231055 Gültig vom 19.11.2025 bis 18.11.2028 · Auskunft 600013939 auf GOV.UK
The elbows are used in pipelines to change the angle of the pipeline. They are made from stainless steel. The stainless steel elbow is welded into a pipeline to change angle of pipeline, but keep a continued flow.
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 has been used to classify this product by the terms of heading 7307 - Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel GIR 6 has been used to classify the goods to subheading level 7307 23 - Other, of stainless steel; Butt welding fittings 8 Digit Code 730723 10 - Elbows and Bends; Of austenitic stainless steel grades, corresponding to AISI types 304, 304L, 316, 316L, 316Ti, 321 and 321H and their equivalent in the other norms, with a greatest external diameter not exceeding 406.4 mm and a wall thickness of 16 mm or less, with a roughness average (Ra) of the internal surface not less than 0.8 micrometres, not flanged, …
- UK 7307239055 Gültig vom 24.07.2026 bis 23.07.2029 · Auskunft 600015806 auf GOV.UK
Individually packaged stainless steel pipefittings. Butt welded tee pieces in various sizes, minimum diameter 12.7mm, maximum of 406mm outside diameter. All sizes have a maximum wall thickness of no more than 2mm ,with a roughness average (ra) of the internal surface 0.8 microns and not cast or flanged. Intended use is for welding into pipelines
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 7307 - Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel GIR 5 (b) has been used to identify normal packaging for transport GIR 6 has been used to classify the goods to sub-heading Code to 8 digits - 7307 2390 – other than elbows and bends Code to 10 digits - 7307 2390 55- Of austenitic stainless steel grades, corresponding to aisi types 304, 304l, 316, 316l, 316ti, 321 and 321h and their equivalent in the other norms, with a greatest external diameter not exceeding 406.4 mm and a wall thickness of 16 mm or less, with a …
+ 8 weitere
- UK 7307239085 Gültig vom 11.03.2026 bis 10.03.2029 · Auskunft 600014690 auf GOV.UK
The product is a stainless-steel pipe connection; this is used for quick access to open a pipeline. One end is welded, and the other end sits in the nut part of the union. The screw nut closes or opens the union for quick access to open the line. Made from from forging Stainless Steel austenitic 316 L. These unions are used as they are quick release to allow cleaning or inspection of the line/filter or machine. Packed in packs of 10 pcs.
Begründung
Classification has been determined in accordance with the following: - General Interpretative Rules (GIR)s: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - has been used to classify this product by the terms of heading 7307 - Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel. GIR 5 (b) - Has been used to identify the type of packaging. Normally supplied in packs of 10 pcs. GIR 6 - has been used to classify the goods to subheading level 730723 - Other; of stainless steel; butt welding fittings. 8-digit code 73072390 - Other than elbows and bends. 10-digit code 7307239085 - Other than of austenitic stainless steel grades, corresponding to AISI types 304, 304L, 316, 316L, 316Ti, 321 and 321H and their equivalent in the other norms, …
- UK 7307239085 Gültig vom 23.01.2026 bis 22.01.2029 · Auskunft 600014809 auf GOV.UK
A stainless-steel butt weld fitting ferrule connection, used as a quick release union, allowing quick access to open up a pipeline/filters or machines. One end is welded on, and the other end (flange end) is connected with a quick release clamp. Secured by tightening the screw on the clamp. They are not permanently fixed. Used in pipelines or on filters and machines so a quick release clamp can be fitted. Normally supplied in packs of 10 pcs.
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 7307 - Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel GIR 5 (b) - Has been used to identify the type of packaging. Normally supplied in packs of 10 pcs. GIR 6 - Has been used to classify the goods to subheading level 730723 – Butt welding fittings 8 Digit Code 73072390 – Other than elbows and bends 10 Digit Code 7307239085 – Other than for use in certain types of aircraft Also classified in accordance with: Notes 2(a) and 3 to Section XV Note e to Chapter 72 Harmonized System Explanatory Notes (HSENs) to heading …
- UK 7307239085 Gültig vom 06.10.2026 bis 05.10.2029 · Auskunft 600016200 auf GOV.UK
Stainless Steel RJT Union Connection Parts used for joining pipework, filters, tanks or valves in breweries and dairy factories. The connection is made of 4 parts, 1 austenitic hexagon nut, 1 austenitic threaded male, 1 austenitic liner and 1 Rubber EPDM seal. The two end components are to be welded to the pipework whilst the nut and O ring provide a seal and quick release system to separate the two joins when necessary, making the inside easily accessible. The components are individually packed
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 7307 - Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel GIR 5 (b) has been used to identify normal packaging for transport GIR 6 has been used to classify the goods to sub-heading 7307 23 – Butt welding fittings Code to 8 digits -7307 2390 – Other than elbows and bends Code to 10 digits - 7307 2390 85 – Other than for use in certain types of aircraft Also classified in accordance with :- Harmonised Standard Explanatory Notes (HSENs) to heading – 7307
- UK 7307291090 Gültig vom 21.05.2026 bis 20.05.2029 · Auskunft 600015655 auf GOV.UK
The BSP unions M/F are used as a threaded connection, it is made from stainless steel. These can be made by either casing or from pipe. These are threaded fittings and are connected by threading one product into the other. The couplings have a female thread and a male thread, fitting is screwed into the coupling. The size range of the couplings are 1/4 inch to 4 inches. Packaged: these are supplied in boxes. Depending on the size, the packages can be from 5 pcs to 100 pcs.
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - Has been used to classify this product by the terms of heading 7307 - Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel. GIR 5b - Has been used to identify the type of packaging: Supplied in boxes. GIR 6 - Has been used to classify this product by the terms of heading 7307 29 - Other than; Cast fittings, of stainless steel; Other than; Flanges, threaded elbows, elbows and sleeves, elbows and bends, and butt welding fittings. Digit Code: 730729 10 - Threaded. Digit Code: 73072910 90 - Other than; For use in certain types of aircraft Also Classified in Accordance with: Note 3 to Section XV Harmonized System Explanatory …
- UK 7307910090 Gültig vom 03.06.2024 bis 02.06.2027 · Auskunft 600010534 auf GOV.UK
Carbon Steel Blind Flange used to blank off the end of 'Marine Hose String' to retain residual product The Lightweight Blind Flange is used to blank off the end of a hose string both to retain residual product outboard of the butterfly valve and to protect the Camlock flange face (or other terminating equipment). The Lightweight Blind Flange should not be used for pressure testing
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). Gir 1 has been used to classify this product by the terms of heading 7307: Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel Gir 6 has been used to classify the goods to subheading level 730791: Other than cast fittings or other than of stainless steel; Flanges 10 Digit code 7307910090: Other than for use in certain types of aircraft Also classified in accordance with: Section Note 3 to Section XV Harmonized System Explanatory Note (HSEN's) to heading 7307
- UK 7307910090 Gültig vom 12.03.2026 bis 11.03.2029 · Auskunft 600015099 auf GOV.UK
Mild steel flange made from bar forgings and used to connect pipework together. Using two flanges, bolts are passed through the holes to secure them together. Suitable for use on 15mm (outside diameter) to 606mm (outside diameter) pipework Approximately 1000 kg pallets - these are normally on a wooden pallet and shrink wrapped
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 7307 - Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel GIR 5 (b) - Has been used to identify the type of packaging. Approximately 1000 kg pallets - these are normally on a wooden pallet and shrink wrapped GIR 6 - Has been used to classify the goods to subheading level 730791 - Flanges 10 Digit Code 7307910090 – other than for use in certain types of aircraft Also classified in accordance with: Note 3 to Section XV Harmonized System Explanatory Notes (HSENs) to heading 7307
- UK 7307929090 Gültig vom 29.06.2025 bis 28.06.2028 · Auskunft 600013206 auf GOV.UK
A BU Bend that is a fabricated duct fitting made from galvanized steel, designed for integration into circular air distribution systems. It serves to alter the direction of airflow within heating, ventilation, and air conditioning duct work. The product is manufactured in various fixed angles and diameters to match standard duct sizes. For this particular classification, the bend is for the 90° angle. This bend includes factory-installed EPDM rubber gaskets to ensure airtight mechanical connections without the need for additional sealing materials.
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 has been used to classify this product by the terms of heading 7307: Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel GIR 6 has been used to classify the goods to subheading level 730792: Other than cast fittings; Other than of other, of stainless steel 8 Digit code 73079290: Threaded elbows, bends and sleeves; Elbows and bends 10 Digit code 7307929090: Other than for use in certain types of aircraft Also classified in accordance with: Note 3 to Section XV Harmonized System Explanatory Note (HSEN's) to heading 7307
- UK 7307998099 Gültig vom 26.04.2024 bis 25.04.2027 · Auskunft 600010281 auf GOV.UK
The Marine Breakaway Coupling is designed as a safeguard during the offshore transfer of fluids. It works by preventing spillages into the ocean of fluids in the case of unplanned disconnection or pressure surges. The main body of the product is made from forged carbon steel with titanium alloy bolting. It is not threaded and made from carbon steel forgings and then precision machined to an approved design. It has an external diameter not exceeding 609.6mm. The product works by the bolts connecting the 2 halves which break under a specified load tension and each half immediately closes to minimise loss of fluid. It is packaged within fumigated wooden crates.
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading 7307 - Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel GIR 5(b) - has been used to identify the type of packaging. Packaged in fumigated wooden crates GIR 6 has been used to classify this product to subheading level 730799 - Other than flanges, threaded elbows, bends and sleeves and butt welding fittings 8 Digit Code 73079980 - Other than threaded 10 digit code 7307998099 - Other than for use in certain types of aircraft; Other than with greatest external diameter not exceeding 609.6mm Also classified in …
Quelle: HM Revenue & Customs, Advance Tariff Rulings. Enthält Informationen des öffentlichen Sektors unter der Open Government Licence v3.0.
Beschränkungen und Hinweise für 7307000000
- CBAM: CO2-Grenzausgleich Verordnung (EU) 2023/956, Anhang I 7307
Sektor: Eisen und Stahl
Rechtsakt auf EUR-Lex lesen - Russland-Sanktionen: Einfuhrverbot Verordnung (EU) Nr. 833/2014, Anhang XVII 7307
Art. 3g, Eisen- und Stahlerzeugnisse
Rechtsakt auf EUR-Lex lesen - Russland-Sanktionen: Ausfuhrverbot Verordnung (EU) Nr. 833/2014, Anhang XXIII 7307
Art. 3k, Güter, die zur Stärkung der industriellen Kapazitäten Russlands beitragen könnten
Rechtsakt auf EUR-Lex lesen
Nur zur Orientierung. Prüfen Sie den Rechtsakt, bevor Sie sich auf einen Hinweis verlassen; Schwellenwerte, Ausnahmen und Genehmigungen sind nicht vollständig abgebildet.
Einfuhrumsatzsteuer in der EU
- Belgien 21 %
- Bulgarien 20 %
- Dänemark 25 %
- Deutschland 19 %
- Estland 24 %
- Finnland 25,5 %
- Frankreich 20 %
- Griechenland 24 %
- Irland 23 %
- Italien 22 %
- Kroatien 25 %
- Lettland 21 %
- Litauen 21 %
- Luxemburg 17 %
- Malta 18 %
- Niederlande 21 %
- Österreich 20 %
- Polen 23 %
- Portugal 23 %
- Rumänien 21 %
- Schweden 25 %
- Slowakei 23 %
- Slowenien 22 %
- Spanien 21 %
- Tschechien 21 %
- Ungarn 27 %
- Zypern 19 %
Normalsatz je Mitgliedstaat auf Zollwert, Zoll und Transportkosten bis zum Bestimmungsort. Ermäßigte Sätze hängen oft von Verwendung oder Abnehmer ab und gelten nur, wenn das Land sie für die Ware vorsieht. Quelle: Europäische Kommission, Taxes in Europe Database, Stand 02.11.2026.
Ursprungsregeln
Die Präferenzursprungsregeln für die Unterposition 730700 hängen vom Handelsabkommen ab. Die Kommission veröffentlicht sie in Access2Markets.
Ursprungsregeln bei Access2MarketsInformationen
Wenn Sie "Rohrformstücke, Rohrverschlussstücke und Rohrverbindungsstücke (z. B. Bogen, Muffen), aus Eisen oder Stahl" importieren oder exportieren, ist es wichtig, den richtigen HS-Code oder TARIC-Code zu haben. Der HS-Code 7307000000 80 ist der Standardcode für dieses Produkt und stellt sicher, dass die richtigen Zölle und Abgaben bei einer Überquerung internationaler Grenzen angewendet werden.
Um sicherzustellen, dass Ihre Geschäftsabwicklung bei der Einfuhr oder Ausfuhr von "Rohrformstücke, Rohrverschlussstücke und Rohrverbindungsstücke (z. B. Bogen, Muffen), aus Eisen oder Stahl" reibungslos verläuft, sollten Sie folgende Punkte beachten:
- Informieren Sie sich über die spezifischen Einfuhr- und Ausfuhrbestimmungen in den beteiligten Ländern. Dazu gehören mögliche Beschränkungen, Steuern und Zölle, die auf "Rohrformstücke, Rohrverschlussstücke und Rohrverbindungsstücke (z. B. Bogen, Muffen), aus Eisen oder Stahl" anwendbar sind.
- Prüfen Sie, ob zusätzliche Lizenzen, Genehmigungen oder Zertifikate erforderlich sind, um "Rohrformstücke, Rohrverschlussstücke und Rohrverbindungsstücke (z. B. Bogen, Muffen), aus Eisen oder Stahl" in das Zielland zu importieren oder aus dem Herkunftsland zu exportieren.
- Achten Sie darauf, dass Ihre Handelspartner über gültige Identifikationsnummern verfügen, wie zum Beispiel die EORI-Nummer (Economic Operators Registration and Identification) in der EU, um den Handel effizienter zu gestalten und Verzögerungen zu minimieren.
- Stellen Sie sicher, dass alle handels- und zollrelevanten Dokumente (wie Handelsrechnungen, Packlisten, Ursprungszertifikate und Versicherungspolicen) korrekt ausgefüllt sind und den jeweiligen nationalen Vorschriften entsprechen.
- Behalten Sie die aktuellen Wechselkurse sowie die Kosten für Verpackung, Versand und Versicherung im Blick, um eine genaue Kalkulation der Handelskosten durchzuführen.
Zusammenfassend lautet der HS-Code oder TARIC-Code für "Rohrformstücke, Rohrverschlussstücke und Rohrverbindungsstücke (z. B. Bogen, Muffen), aus Eisen oder Stahl" 7307000000 80. Stellen Sie sicher, dass Sie diesen Code in all Ihren Handels- und Zolldokumenten korrekt verwenden, um eine reibungslose und problemlose Transaktion zu gewährleisten. Mit diesen Tipps sind Sie besser auf die Herausforderungen im internationalen Handel vorbereitet und können erfolgreich "Rohrformstücke, Rohrverschlussstücke und Rohrverbindungsstücke (z. B. Bogen, Muffen), aus Eisen oder Stahl" importieren und exportieren.
HS-Code Struktur
1. HS Kapitel
Es gibt 21 unterschiedliche Abschnitte, die in 96 Kapitel unterteilt sind. Ausnahmekapitel beinhalten Kapitel 77, welches für zukünftige Nutzung reserviert ist, Kapitel 98 und 99, die auf nationaler Ebene begrenzt sind, und Kapitel 99, welches ein spezifischer Code für temporäre Änderungen ist. Im obigen Beispiel wurde Kapitel 73 ausgewählt, für waren aus eisen oder stahl
2. HS Position
Die Überschrift bestimmt die spezifische Kategorie innerhalb eines bestimmten Kapitels. Im obigen Beispiel bezieht sich die 07 auf Rohrformstücke, Rohrverschlussstücke und Rohrverbindungsstücke (z. B. Bogen, Muffen), aus Eisen oder Stahl.
HS-Code Baumstruktur
7300000000 80
HS Kapitel WAREN AUS EISEN ODER STAHL
7307000000 80
Rohrformstücke, Rohrverschlussstücke und Rohrverbindungsstücke (z. B. Bogen, Muffen), aus Eisen oder Stahl
7307110000 10
- gegossen
7307110000 80
- - aus nicht verformbarem Gusseisen
7307111000 80
- - - von der für Druckrohre verwendeten Art
7307119000 80
- - - andere
7307190000 80
- - andere
7307191000 80
- - - aus Gusseisen
7307191003 10
- - - - mit Gewinde
7307191003 20
- - - - - aus Temperguss
7307191003 80
- - - - - - Grundbestandteile von Klemmfittings mit metrischem ISO/DIN-13-Gewinde
7307191005 80
- - - - - - runde Abzweigdosen, die keine Abdeckung haben
7307191010 80
- - - - - - andere
7307191013 10
- - - - - aus Gusseisen mit Kugelgrafit
7307191013 80
- - - - - - Grundbestandteile von Klemmfittings mit metrischem ISO/DIN-13-Gewinde
7307191015 80
- - - - - - T-Rohrverbundstücke aus Gusseisen mit Kugelgrafit mit Gummidichtung und Auslassöffnung, gefalzte Endstopfen aus Gusseisen mit Kugelgrafit zur Verwendung auf gefalzten Stahlrohren mit Gewindeöffnung, gefalzte Reduzierstücke aus Gusseisen mit Kugelgrafit mit Gewindeöffnung, gefalzte T-Reduzierstücke aus Gusseisen mit Kugelgrafit mit Gewindeöffnung, Rohrschellen aus Gusseisen mit Kugelgrafit ohne Gewindeöffnungen zur Abdichtung von Löchern in Rohren
7307191020 80
- - - - - - andere
7307191030 80
- - - - - andere
7307191034 10
- - - - ohne Gewinde
7307191034 20
- - - - - aus Temperguss
7307191034 80
- - - - - - Runde Abzweigdosen aus Temperguss, mit Gewinde, die keine Abdeckung haben
7307191035 80
- - - - - - andere
7307191040 80
- - - - - aus Gusseisen mit Kugelgrafit
7307191045 80
- - - - - andere
7307199000 80
- - - andere
7307210000 10
- andere, aus nicht rostendem Stahl
7307210000 80
- - Flansche
7307210010 80
- - - für bestimmte Luftfahrzeuge
7307210090 80
- - - andere
7307220000 80
- - Bogen, Winkel und Muffen, mit Gewinde
7307221000 80
- - - Muffen
7307229000 80
- - - Bogen und Winkel
7307229010 80
- - - - für bestimmte Luftfahrzeuge
7307229090 80
- - - - andere
7307230000 80
- - Formstücke, Verschlussstücke und Verbindungsstücke, zum Stumpfschweißen
7307231000 80
- - - Bogen und Winkel
7307231035 10
- - - - aus austenitischem nicht rostendem Stahl der AISI-Sorten 304, 304L, 316, 316L, 316Ti, 321 und 321H und deren Entsprechungen in den anderen Normen mit einem größten äußeren Durchmesser von bis zu 406,4 mm und einer Wandstärke kleiner oder gleich 16 mm, mit einer durchschnittlichen Rauheit (Ra) der Innenfläche von mindestens 0,8 μm, ohne Flansch, auch als Fertigwaren
7307231035 20
- - - - - versandt aus Malaysia
7307231035 80
- - - - - - für bestimmte Luftfahrzeuge
7307231040 80
- - - - - - andere
7307231050 10
- - - - - andere
7307231050 80
- - - - - - für bestimmte Luftfahrzeuge
7307231055 80
- - - - - - andere
7307231080 10
- - - - andere
7307231080 80
- - - - - für bestimmte Luftfahrzeuge
7307231085 80
- - - - - andere
7307239000 80
- - - andere
7307239035 10
- - - - aus austenitischem nicht rostendem Stahl der AISI-Sorten 304, 304L, 316, 316L, 316Ti, 321 und 321H und deren Entsprechungen in den anderen Normen mit einem größten äußeren Durchmesser von bis zu 406,4 mm und einer Wandstärke kleiner oder gleich 16 mm, mit einer durchschnittlichen Rauheit (Ra) der Innenfläche von mindestens 0,8 μm, ohne Flansch, auch als Fertigwaren
7307239035 20
- - - - - versandt aus Malaysia
7307239035 80
- - - - - - für bestimmte Luftfahrzeuge
7307239040 80
- - - - - - andere
7307239050 10
- - - - - andere
7307239050 80
- - - - - - für bestimmte Luftfahrzeuge
7307239055 80
- - - - - - andere
7307239080 10
- - - - andere
7307239080 80
- - - - - für bestimmte Luftfahrzeuge
7307239085 80
- - - - - andere
7307290000 80
- - andere
7307291000 80
- - - mit Gewinde
7307291010 80
- - - - für bestimmte Luftfahrzeuge
7307291090 80
- - - - andere
7307298000 80
- - - andere
7307298010 80
- - - - für bestimmte Luftfahrzeuge
7307298090 80
- - - - andere
7307910000 10
- andere
7307910000 80
- - Flansche
7307910010 80
- - - für bestimmte Luftfahrzeuge
7307910090 80
- - - andere
7307920000 80
- - Bogen, Winkel und Muffen, mit Gewinde
7307921000 80
- - - Muffen
7307929000 80
- - - Bogen und Winkel
7307929010 80
- - - - für bestimmte Luftfahrzeuge
7307929090 80
- - - - andere
7307930000 80
- - Formstücke, Verschlussstücke und Verbindungsstücke, zum Stumpfschweißen
7307931100 10
- - - mit einem größten äußeren Durchmesser von 609,6 mm oder weniger
7307931100 80
- - - - Bogen und Winkel
7307931111 10
- - - - - für bestimmte Luftfahrzeuge
7307931111 80
- - - - - - versandt aus Taiwan, Indonesien, Sri Lanka oder den Philippinen
7307931119 80
- - - - - - andere
7307931130 10
- - - - - andere
7307931130 80
- - - - - - andere Rohrstücke mit Gewinde
7307931191 10
- - - - - - andere
7307931191 80
- - - - - - - versandt aus Taiwan
7307931193 80
- - - - - - - versandt aus Indonesien
7307931194 80
- - - - - - - versandt aus Sri Lanka
7307931195 80
- - - - - - - versandt aus den Philippinen
7307931199 80
- - - - - - - andere
7307931900 80
- - - - andere
7307931911 10
- - - - - für bestimmte Luftfahrzeuge
7307931911 80
- - - - - - versandt aus Taiwan, Indonesien, Sri Lanka oder den Philippinen
7307931919 80
- - - - - - andere
7307931930 10
- - - - - andere
7307931930 80
- - - - - - andere Rohrstücke mit Gewinde
7307931991 10
- - - - - - andere
7307931991 80
- - - - - - - versandt aus Taiwan
7307931993 80
- - - - - - - versandt aus Indonesien
7307931994 80
- - - - - - - versandt aus Sri Lanka
7307931995 80
- - - - - - - versandt aus den Philippinen
7307931999 80
- - - - - - - andere
7307939100 10
- - - mit einem größten äußeren Durchmesser von mehr als 609,6 mm
7307939100 80
- - - - Bogen und Winkel
7307939110 80
- - - - - für bestimmte Luftfahrzeuge
7307939190 80
- - - - - andere
7307939900 80
- - - - andere
7307939910 80
- - - - - für bestimmte Luftfahrzeuge
7307939990 80
- - - - - andere
7307990000 80
- - andere
7307991000 80
- - - mit Gewinde
7307991010 80
- - - - für bestimmte Luftfahrzeuge
7307991090 80
- - - - andere
7307998000 80
- - - andere
7307998011 10
- - - - für bestimmte Luftfahrzeuge
7307998011 20
- - - - - mit einem größten äußeren Durchmesser von 609,6 mm oder weniger
7307998011 80
- - - - - - versandt aus Taiwan, Indonesien, Sri Lanka oder den Philippinen
7307998019 80
- - - - - - andere
7307998020 80
- - - - - andere
7307998092 10
- - - - andere
7307998092 20
- - - - - mit einem größten äußeren Durchmesser von 609,6 mm oder weniger
7307998092 80
- - - - - - versandt aus Taiwan
7307998093 80
- - - - - - versandt aus Indonesien
7307998094 80
- - - - - - versandt aus Sri Lanka
7307998095 80
- - - - - - versandt aus den Philippinen
7307998098 80
- - - - - - andere
7307998099 80
- - - - - andere