Import Handelsbeschränkungen für 7318000000 80
Diese Tabelle enthält Informationen zu den Handelsbeschränkungen für den Import von Waren in die EU und die EU in Drittländer. Die Tabelle enthält Informationen zu den Handelsbeschränkungen, die aufgrund von Zollunionen, Präferenzen, Tarifquoten, Zollunionen, Veterinärkontrollen, Drittländerzöllen und Nicht-Präferenz-Tarifquoten erhoben werden.
| Ursprungsland | Start | Zoll / Steuer | Rechtsgrundlage Maßnahmetyp | |
|---|---|---|---|---|
| Faroe Islands FO | 01-01-1997 | 0 % | Tarifpräferenz 142 | |
1011 | ERGA OMNES 1011 | 01-01-2005 | 3.7 % | Drittländer-Zoll 103 |
| San Marino SM | 01-01-2006 | 0 % | Zollunion-Zoll 106 | |
| Türkiye TR | 01-01-2006 | 0 % | Zollunion-Zoll 106 | |
| EU-Switzerland agreement: re-imported goods 1007 | 01-01-2007 | 0 % | Tarifpräferenz 142 | |
| Bosnia and Herzegovina BA | 01-01-2009 | 0 % | Tarifpräferenz 142 | |
| North Macedonia MK | 01-01-2009 | 0 % | Tarifpräferenz 142 | |
| Ukraine UA | 01-01-2016 | 0 % | Tarifpräferenz 142 | |
| Ecuador EC | 01-01-2017 | 0 % | Tarifpräferenz 142 | |
2020 | GSP - General arrangements 2020 | 01-01-2017 | 0 % | Tarifpräferenz 142 |
2080 | OCTs (Overseas Countries and Territories) 2080 | 01-01-2021 | 0 % | Tarifpräferenz 142 |
XS | Serbia XS | 01-02-2010 | 0 % | Tarifpräferenz 142 |
| Japan JP | 01-02-2020 | 0 % | Tarifpräferenz 142 | |
| Peru PE | 01-03-2013 | 0 % | Tarifpräferenz 142 | |
| Albania AL | 01-04-2009 | 0 % | Tarifpräferenz 142 | |
| Kosovo XK | 01-04-2016 | 0 % | Tarifpräferenz 142 | |
| Montenegro ME | 01-05-2010 | 0 % | Tarifpräferenz 142 | |
| New Zealand NZ | 01-05-2024 | 0 % | Tarifpräferenz 142 | |
| Syria SY | 01-08-1994 | 0 % | Tarifpräferenz 142 | |
| Viet Nam VN | 01-08-2020 | 0 % | Tarifpräferenz 142 | |
| Georgia GE | 01-09-2014 | 0 % | Tarifpräferenz 142 | |
1011 | ERGA OMNES 1011 | 01-11-2018 | 0 % | Lufttüchtigkeit Tarifsperre 119 |
1011 | ERGA OMNES 1011 | 01-11-2026 | 3 EUR | Low-value consignment customs duty 107 |
| South Africa ZA | 10-10-2016 | 0 % | Tarifpräferenz 142 | |
| Armenia AM | 10-10-2026 – 11-10-2028 | 0 % | Tarifpräferenz 142 | |
| Switzerland CH | 20-12-1972 | 0 % | Tarifpräferenz 142 | |
| Canada CA | 21-09-2017 | 0 % | Tarifpräferenz 142 | |
| EU-Canada agreement: re-imported goods 1006 | 21-09-2017 | 0 % | Tarifpräferenz 142 | |
| Andorra AD | 01-01-2006 | 0 % | Zollunion-Zoll 106 | |
2005 | GSP-EBA (Special arrangement for the least-developed countries - Everything But Arms) 2005 | 01-01-2014 | 0 % | Tarifpräferenz 142 |
2027 | GSP+ (incentive arrangement for sustainable development and good governance) 2027 | 01-01-2014 | 0 % | Tarifpräferenz 142 |
| Moldova, Republic of MD | 01-01-2016 | 0 % | Tarifpräferenz 142 | |
| United Kingdom GB | 01-01-2021 | 0 % | Tarifpräferenz 142 | |
| Ghana GH | 01-01-2027 | 0 % | Tarifpräferenz 142 | |
| Singapore SG | 01-01-2027 | 0 % | Tarifpräferenz 142 | |
| Chile CL | 01-02-2025 | 0 % | Tarifpräferenz 142 | |
| Tunisia TN | 01-03-1998 | 0 % | Tarifpräferenz 142 | |
| Morocco MA | 01-03-2000 | 0 % | Tarifpräferenz 142 | |
| Lebanon LB | 01-04-2006 | 0 % | Tarifpräferenz 142 | |
| Jordan JO | 01-05-2002 | 0 % | Tarifpräferenz 142 | |
| Egypt EG | 01-06-2004 | 0 % | Tarifpräferenz 142 | |
2012 | EEA - European Economic Area 2012 | 01-07-2007 | 0 % | Tarifpräferenz 142 |
| Korea, Republic of (South Korea) KR | 01-07-2011 | 0 % | Tarifpräferenz 142 | |
| Mexico MX | 01-07-2016 | 0 % | Tarifpräferenz 142 | |
| Kenya KE | 01-07-2024 | 0 % | Tarifpräferenz 142 | |
| United States US | 01-07-2026 | 0 % | Tarifpräferenz 142 | |
2200 | Central America 2200 | 01-08-2013 | 0 % | Tarifpräferenz 142 |
| Colombia CO | 01-08-2013 | 0 % | Tarifpräferenz 142 | |
| Algeria DZ | 01-09-2005 | 0 % | Tarifpräferenz 142 | |
1011 | ERGA OMNES 1011 | 01-11-2026 | 2 EUR | Union handling fee 800 |
| Ivory Coast CI | 02-12-2019 | 0 % | Tarifpräferenz 142 | |
2000 | Preferential origin in accordance with the Agreement in the form of an Exchange of Letters between the European Union and the Kingdom of Morocco on the amendment of Protocols 1 and 4 to the Euro-Mediterranean Agreement establishing an association between the European Communities and their Member States, of the one part, and the Kingdom of Morocco, of the other part. 2000 | 03-10-2025 | 0 % | Tarifpräferenz 142 |
| Cameroon CM | 04-08-2014 | 0 % | Tarifpräferenz 142 | |
| Belarus BY | 05-06-2022 | Importverbot 277 | ||
XL | Melilla XL | 07-12-2003 | 0 % | Zugangsakt0001/85 Tarifpräferenz 142 |
XC | Ceuta XC | 07-12-2003 | 0 % | Zugangsakt0001/85 Tarifpräferenz 142 |
| Occupied palestinian Territory PS | 07-12-2003 | 0 % | Tarifpräferenz 142 | |
1035 | SADC EPA 1035 | 10-10-2016 | 0 % | Tarifpräferenz 142 |
1034 | Eastern and Southern Africa States 1034 | 14-05-2012 | 0 % | Tarifpräferenz 142 |
| Ghana GH | 15-12-2016 – 31-12-2026 | 0 % | Tarifpräferenz 142 | |
| Israel IL | 16-05-2023 | 0 % | Tarifpräferenz 142 | |
| Solomon Islands SB | 17-05-2020 | 0 % | Tarifpräferenz 142 | |
| Papua New Guinea PG | 20-12-2009 | 0 % | Tarifpräferenz 142 | |
| Singapore SG | 21-11-2019 – 31-12-2026 | 0 % | Tarifpräferenz 142 | |
| Fiji FJ | 28-07-2014 | 0 % | Tarifpräferenz 142 | |
1033 | CARIFORUM 1033 | 29-12-2008 | 0 % | Tarifpräferenz 142 |
| Samoa WS | 31-12-2018 | 0 % | Tarifpräferenz 142 |
| Ursprungsland | Start | Zoll / Steuer | Rechtsgrundlage Maßnahmetyp | |
|---|---|---|---|---|
1008 | All third countries 1008 | 01-01-2026 – 31-12-2026 | Dokument nötig ohne Dokument verboten | Carbon Border Adjustment Mechanism - CBAM 775 |
| Russian Federation RU | 19-12-2023 – 31-12-2027 | Dokument nötig ohne Dokument verboten | Importkontrolle 763 | |
1008 | All third countries 1008 | 19-12-2023 – 31-12-2027 | Dokument nötig ohne Dokument verboten | Importkontrolle 763 |
| Ukraine UA | 24-06-2026 | Dokument nötig ohne Dokument verboten | Importkontrolle 762 | |
| Ukraine UA | 24-06-2026 | Dokument nötig ohne Dokument verboten | Importkontrolle 760 |
Erklärung der Handelsbeschränkungen
Erga Omnes bedeutet "für alle".
Drittländer sind Länder, die nicht der EU angehören.
GSP bedeutet "Generalised System of Preferences".
GSP Plus bedeutet "Generalised System of Preferences Plus".
European Economic Area (EEA) bedeutet alle EU-Mitgliedstaaten und Island, Liechtenstein und Norwegen.
OCTs steht für "Overseas Countries and Territories". Es sind Länder und Gebiete, die nicht der EU angehören. Mehr Informationen
CARIFORUM ist eine regionale Wirtschaftsintegrationsorganisation, die 15 Mitgliedstaaten der Karibischen Gemeinschaft (CARICOM) und die Dominikanische Republik umfasst.
SADC EPA steht für "Southern African Development Community - Economic Partnership Agreement".
Zoll bedeutet "Zollabgaben".
Einfuhrkosten für 7318000000 schätzen
- Zollwert 1.000,00 €
- Zoll 3,7 % 37,00 €
- Einfuhrumsatzsteuer 19 % 197,03 €
- Summe 1.234,03 €
Kann unter Bedingungen niedriger sein:
- Airworthiness tariff suspension: 0 %
Dokumente und Kontrollen für China
Nur eine Schätzung. Der Zollwert ist der Preis einschließlich Transport und Versicherung bis zur EU-Grenze. Verbrauchsteuern, andere Gebühren und herstellerbezogene Antidumpingzölle sind nicht berücksichtigt. Präferenzsätze gelten nur mit gültigem Ursprungsnachweis. Länderzugehörigkeit und Ausnahmen: TARIC, Stand November 2026.
Ausfuhrmaßnahmen für 7318000000
Was gilt, wenn diese Waren die EU verlassen: Ausfuhrkontrollen, Dual-Use- und andere Genehmigungen, Verbote je Bestimmungsland und die besondere Maßeinheit der Ausfuhranmeldung.
| Bestimmungsland | Start | Zoll / Steuer | Rechtsgrundlage Maßnahmetyp | |
|---|---|---|---|---|
| North Korea (Democratic People’s Republic of Korea) KP | 28-02-2018 | Export prohibition 278 |
| Bestimmungsland | Start | Zoll / Steuer | Rechtsgrundlage Maßnahmetyp | |
|---|---|---|---|---|
| Belarus BY | 24-04-2026 | Dokument nötig ohne Dokument verboten | Export control 766 | |
| Russian Federation RU | 26-07-2026 | Dokument nötig ohne Dokument verboten | Export control 709 | |
| Ukraine UA | 25-02-2025 | Dokument nötig ohne Dokument verboten | Export control 709 | |
| Ukraine UA | 25-08-2022 | Dokument nötig ohne Dokument verboten | Export control 767 |
Geschichte
Zollsätze und Maßnahmen für diesen Code im Zeitverlauf (Jahresstände).
Präferenzursprungsregeln für 7318000000
Was eine Ware erfüllen muss, um als Ursprungsware eines Partnerlandes zu gelten und den Präferenzzoll zu erhalten, je Abkommen. Wortlaut der Abkommen auf Englisch.
Autonomous Trade Preferences (Western Balkans) · Kosovo
EU-Chile Association Agreement · Chile
EU-Algeria Association Agreement · Algerien
EEA/EFTA agreements (Switzerland, Norway, Liechtenstein, Faroe Islands) · Färöer, Liechtenstein, Norwegen, Schweiz
EU-Egypt Association Agreement · Ägypten
EU-Georgia DCFTA · Georgien
Generalised Scheme of Preferences (GSP, GSP+, EBA) · Armenien, Indien, Kenia, Pakistan, Salomonen, Samoa, Syrien, Vietnam
EU-Iceland FTA · Island
EU-Jordan Association Agreement · Jordanien
EU-Jordan Association Agreement (relaxed rules, 2016) · Jordanien
EU-Korea FTA · Südkorea
EU-Central America Association Agreement
EU-Lebanon Association Agreement · Libanon
EU-Morocco Association Agreement · Marokko
EU-Moldova DCFTA · Republik Moldau
Pan-Euro-Mediterranean (PEM) Convention · Ägypten, Albanien, Andorra, Bosnien und Herzegowina, Färöer, Island, Kosovo, Liechtenstein, Montenegro, Nordmazedonien, Norwegen, Palästina, Schweiz, Türkei
EU-Singapore FTA · Singapur
EU-Tunisia Association Agreement · Tunesien
EU-Ukraine DCFTA · Ukraine
Articles of iron or steel; except for: / or: Manufacture from materials of any heading, except that of the product
EPA CARIFORUM
EU Market Access Regulation (EPA) · Côte d’Ivoire, Ghana, Kamerun, Kenia
EPA Pacific · Fidschi, Papua-Neuguinea, Salomonen, Samoa
EU-Mexico Global Agreement · Mexiko
EU-Palestine Interim Association Agreement · Palästina
EPA SADC · Südafrika
Articles of iron or steel; except for: / or: Manufacture in which all the materials used are classified within a heading other than that of the product
EU-Canada CETA · Kanada
A change from any other heading.
EU-Colombia/Peru/Ecuador Trade Agreement · Ecuador, Kolumbien, Peru
Articles of iron or steel; except for: / or: Manufacture from materials of any heading, except that of the product [95]
EPA Eastern and Southern Africa
Sheet piling / or: Manufacture from materials of heading No 7206
EU-Japan EPA · Japan
CTH
EU-Viet Nam FTA · Vietnam
Articles of iron or steel; except for: / or: Manufacture from materials of any heading, except that of the product.
Quelle: Europäische Kommission, Access2Markets (CC BY 4.0, gekürzt). Maßgeblich ist der Text des Abkommens. Access2Markets
Anmerkungen und Erläuterungen zu 7318000000
7318 11 00 Erläuterungen zur Kombinierten Nomenklatur: Schwellenschrauben
Schwellenschrauben sind eine besondere Art von ungeschlitzten Holzschrauben, die einen sechs- oder vierkantigen Kopf mit ggf. einem Teller haben. Man unterscheidet zwei Typen von Schwellenschrauben: — Schrauben zum Befestigen von Eisenbahnschienen an Holzschwellen; das sind dem Grunde nach große Holzschrauben (siehe Beispiel A); — Schrauben zum Verbinden von Gebälk und anderen dicken Holzteilen, die im Hinblick auf ihren Verwendungszweck einen Schaftdurchmesser von mehr als 5 mm aufweisen (siehe Beispiel B). Beispiel A Beispiel B
7318 14 91 Erläuterungen zur Kombinierten Nomenklatur: Blechschrauben
Hierher gehören gehärtete Schrauben mit Kopf und Befestigungsgewinde (Spitzgewinde) zum Eindrehen (Einziehen) in Blech. Ihr Gewinde ist nicht metrisch und verläuft vom Schaftende bis zum Kopf. Das Schaftende ist zu einer Spitze oder einem Zapfen ausgebildet. Sie haben beispielhaft folgendes Aussehen:
7318 15 20 Erläuterungen zur Kombinierten Nomenklatur: zum Befestigen von Oberbaumaterial für Bahnen
Hierher gehören insbesondere: 1. Klemmschrauben, die im Allgemeinen einen viereckigen oder trapezförmigen Kopf mit oder ohne Vierkantansatz haben. Diese Schrauben werden für Metallträger verwendet; 2. Laschenschrauben, die im Allgemeinen einen viereckigen oder halbrunden Kopf und einen ovalen Ansatz haben. Die Schrauben dienen zur Verbindung der Schienen untereinander; 3. andere Schrauben zum Befestigen von Schienenelementen, die im Allgemeinen mit aufgedrehter Mutter geliefert werden. Ihre Stiftdicke beträgt 18 mm oder mehr.
7318 15 95 Erläuterungen zur Kombinierten Nomenklatur: andere
Hierher gehören z. B. Schrauben mit Kopf mit Innen- oder Außenvierkant, Außenachtkant oder Außendreikant, Rundkopfschrauben in verschiedenen Ausführungen, z. B.:
7318 16 92 Erläuterungen zur Kombinierten Nomenklatur: und 7318 16 99
andere, mit einer Lochweite von Die Lochweite ist an den Innengängen des Gewindes zu messen. Bei Schrauben ist der Durchmesser dagegen auf der Außenseite des Gewindes zu messen.
7318 16 99 Erläuterungen zur Kombinierten Nomenklatur: und 7318 16 99
andere, mit einer Lochweite von Die Lochweite ist an den Innengängen des Gewindes zu messen. Bei Schrauben ist der Durchmesser dagegen auf der Außenseite des Gewindes zu messen.
7318 15 35 - 7318 15 48 Erläuterungen zur Kombinierten Nomenklatur: bis 7318 15 48
ohne Kopf Hierher gehören Waren mit Innen- oder Außenschraubenantrieb, z. B. mit einem sternförmigen Innen- oder Außensechsrund, jedoch ohne über den Gewindeschaft hinausragenden Kopf. Hierher gehören Waren, die beispielhaft folgende Form haben:
7318 15 52 - 7318 15 95 Erläuterungen zur Kombinierten Nomenklatur: bis 7318 15 95
mit Kopf Hierher gehören Schrauben, deren Kopf über den Gewindeschaft hinausragt.
Anmerkungen zu Kapitel 73
Anmerkungen 1. Als „Gusseisen“ im Sinne des Kapitels 73 gelten durch Gießen hergestellte Erzeugnisse, deren chemische Zusammensetzung nicht der für Stahl nach Anmerkung 1 d) zu Kapitel 72 entspricht und in denen Eisen gegenüber jedem anderen Element gewichtsmäßig vorherrscht. 2. Als „Draht“ im Sinne des Kapitels 73 gelten warm- oder kalthergestellte Erzeugnisse mit beliebiger Form des Querschnitts, dessen größte Abmessung 16 mm oder weniger beträgt.
Quellen: Kombinierte Nomenklatur 2026, Anhang I der Verordnung (EWG) Nr. 2658/87 (CELEX 32025R1926), und die Erläuterungen zur Kombinierten Nomenklatur (CELEX 02019XC0329(02)-20260213). Die Abschnitts- und Kapitelanmerkungen sind rechtsverbindlich, die Erläuterungen sind Auslegungshilfen. EUR-Lex
EU-Einreihungsverordnungen zu 7318000000
Verordnungen der Kommission, die bestimmte Waren in diesen Code eingereiht haben. Sie binden den Zoll in allen Mitgliedstaaten für gleiche Waren.
- 7318 12 10 11.06.2013 · Verordnung auf EUR-Lex
Eine Schraube aus nicht rostendem Stahl mit einer Länge von etwa 2 cm.
Der Schraubenkopf ist mit einem Innenantrieb versehen. Der Schaft weist ein reguläres Teilgewinde auf. Das spitz zulaufende Ende hat eine Schneidkerbe und ist nicht gegabelt. Die Ware ist zur Verwendung in Holz und Holzplatten bestimmt. (*1) Siehe Abbildung.
Begründung
Einreihung gemäß den Allgemeinen Vorschriften 1 und 6 für die Auslegung der Kombinierten Nomenklatur sowie nach dem Wortlaut der KN-Codes 7318 , 7318 12 und 7318 12 10 . Angesichts ihrer Eigenschaften (Schaft mit Teilgewinde, Schneidkerbe am spitz zulaufenden Ende, nicht gegabelt) ist die Ware speziell dafür bestimmt, in Holz einzudringen. Die Ware wird somit als Holzschraube der Unterposition 7318 12 angesehen. Die Ware ist daher als Holzschraube aus nicht rostendem Stahl in den KN-Code 7318 12 10 einzureihen.
- 7318 15 42 23.07.2026 · Verordnung auf EUR-Lex
Verzinkte Gewindestangen aus anderem als nicht rostendem Stahl, in ganzer Länge mit einem metrischen Gewinde versehen, ohne Kopf oder Vertiefung, mit einer Zugfestigkeit von weniger als 800 MPa, in unterschiedlichen Längen (zwischen 1 000 mm und 3 000 mm) und Durchmessern (zwischen 4 und 36 mm).
Sie werden ohne Muttern, Unterlegscheiben oder ähnliche Elemente gestellt. Die Waren werden zum Verbinden, Aufhängen oder Befestigen einer Vielfalt von Vorrichtungen und Komponenten verwendet. Siehe Abbildungen. (*1)
Begründung
Einreihung gemäß den Allgemeinen Vorschriften 1 und 6 für die Auslegung der Kombinierten Nomenklatur, Anmerkung 1 d) zu Kapitel 72 sowie nach dem Wortlaut der KN-Codes 7318 , 7318 15 und 7318 15 42 . Da die Ware ein Gewinde hat und zum Zusammenbauen oder Befestigen von Waren so verwendet wird, dass diese ohne Beschädigung leicht wieder auseinandergenommen werden können (siehe auch die Erläuterung zum Harmonisierten System (HSEN) zu Position 7318 Abschnitt A Absatz 1), weist sie die objektiven Merkmale einer Ware der Unterposition 7318 15 (Gewindestifte; siehe auch die HSEN zu Position 7318 Abschnitt A Absatz 3) auf. Folglich ist eine Einreihung in den KN-Code 7318 19 00 als andere Waren, mit Gewinde, ausgeschlossen. Die Waren sind daher in den KN-Code 7318 15 42 als andere Schrauben und Bolzen ohne Kopf, aus anderem als nichtrostendem Stahl, mit einer Zugfestigkeit von weniger als 800 MPa einzureihen.
- 7318 15 95 20.06.2019 · Verordnung auf EUR-Lex
Einpressbolzen aus Stahl. Er besteht aus einem Gewindeschaft und einem runden, flachen, glatten Kopf mit einer darunter befindlichen Rändelung. Die Dimensionierung kann unterschiedlich sein.
Die Ware wird mithilfe einer hydraulischen oder pneumatischen Presse an Metallblechen geringer Dicke befestigt. Der Kopf verbleibt exakt auf der Höhe des Blechs, während sich der Gewindeteil in senkrechter Position zum Blech befindet. Dadurch entsteht ein Außengewinde, das es ermöglicht, das Blech mittels einer zusätzlichen Mutter mit einem anderen Element zu verbinden, das reversibel abgeschraubt werden kann. (*1) Siehe Abbildung.
Begründung
Einreihung gemäß den Allgemeinen Vorschriften 1 und 6 für die Auslegung der Kombinierten Nomenklatur sowie nach dem Wortlaut der KN-Codes 7318 , 7318 15 und 7318 15 95 . Die Ware hat ein Gewinde und wird dazu verwendet, Waren so zusammenzumontieren oder zu befestigen, dass sie leicht und ohne Beschädigung wieder demontiert werden können. Sie weist die objektiven Merkmale einer Schraube der Position 7318 auf. Daher ist die Einreihung in den KN-Code 7318 19 00 als andere Waren mit Gewinde ausgeschlossen (siehe auch die HS-Erläuterungen zu Position 7318 Buchstabe A). Die Ware ist somit in den KN-Code 7318 15 95 als andere Schrauben aus Stahl einzureihen.
+ 3 weitere
- 7318 16 39 09.04.2019 · Verordnung auf EUR-Lex
Eine Ware mit Gewinde, aus nicht rostendem Stahl gefertigt, mit Innengewinde. Die Ware hat die Form einer Mutter mit einem Flansch an einem Ende.
Sie ist zur Verbindung von Leitungen in hydraulischen Bremssystemen von Kraftfahrzeugen bestimmt. Wird sie angezogen, werden die Komponenten des Verbindungsstücks in die richtige Position gepresst und stellen so die hydraulische Dichtheit her. Siehe Abbildungen (*1).
Begründung
Einreihung gemäß den Allgemeinen Vorschriften (AV) 1 und 6 für die Auslegung der Kombinierten Nomenklatur sowie nach dem Wortlaut der KN-Codes 7318 , 7318 16 und 7318 16 39 . Die Ware weist die objektiven Merkmale von „Waren mit Gewinde“ der Position 7318 auf. Eine Einreihung in die Position 7307 als Rohrformstücke, Rohrverschlussstücke und Rohrverbindungsstücke ist ausgeschlossen, da die Ware die Komponenten, die die Verbindung bilden, lediglich aufeinanderpresst, und sie nicht mit der durch die Leitung übertragenen Flüssigkeit in Kontakt kommt. Das Innengewinde der Ware ist nicht dazu bestimmt, die hydraulische Dichtheit herzustellen oder zu bewahren. Die Ware kann gemäß der Allgemeinen Vorschrift 2 a) für die Auslegung der Kombinierten Nomenklatur nicht als unfertige Verbindungsstücke eingereiht werden, da sie nicht die wesentlichen Beschaffenheitsmerkmale des fertigen Verbindungsstücks hat. Bolzen, Muttern, Schrauben usw. zur Verwendung beim Montieren und Zusammenfügen von Rohrform-, Rohrverschluss- und Rohrverbindungsstücken sind von der Position 7307 ausgeschlossen (siehe auch die HS-Erläuterungen zu Position 7307 , Ausnahmen, Buchstabe b)). Daher ist die Ware in den KN-Code 7318 16 39 als „andere Muttern aus nicht rostendem Stahl“ einzureihen.
- 7318 19 00 12.06.2014 · Verordnung auf EUR-Lex
Eine Ware aus Stahl, deren Schaft teilweise mit einem Gewinde versehen und teilweise mit Kunststoff beschichtet ist. Der Schraubenkopf verfügt über einen Kreuzschlitz. Die Ware ist am unteren Ende weder konisch noch spitz zulaufend. Sie hat eine Länge von etwa 45 mm und einen Außendurchmesser von etwa 7 mm.
Die Ware ist dazu bestimmt, als Teil eines Beschlags für Möbel zu dienen. Das mit Gewinde versehene Ende der Ware wird in ein vorgebohrtes Loch in ein Teil des Möbelstücks geschraubt. Der Schraubenkopf wird in ein vorgebohrtes Loch in ein anderes Teil des Möbelstücks eingeführt. Die beiden Teile des Möbelstücks werden miteinander verbunden, indem der Schraubenkopf im Schlitz des Gegenstücks des Beschlags (bei der Gestellung nicht enthalten) verriegelt wird. (*1) Siehe Abbildung.
Begründung
Einreihung gemäß den Allgemeinen Vorschriften 1, 3 b und 6 für die Auslegung der Kombinierten Nomenklatur, Anmerkung 1 zu Kapitel 83 sowie dem Wortlaut der KN-Codes 7318 und 7318 19 00 . Bei dem Erzeugnis handelt es sich um eine aus zwei Stoffen bestehende Ware. Die Einreihung erfolgt nach dem Material, das der Ware ihren wesentlichen Charakter verleiht (Metall). Eine Einreihung in die Position 8302 als Beschläge aus unedlen Metallen für Möbel ist ausgeschlossen, da die Ware lediglich ein Teil des gesamten Beschlags ist und die Merkmale einer Ware mit Gewinde der Position 7318 (siehe Anmerkung 1 zu Kapitel 83) aufweist. Die Ware wird nicht als Schraube der Position 7318 angesehen, da sie allein nicht in der Lage ist, Waren zu befestigen oder zusammenzufügen. Nur das mit Gewinde versehene Ende der Schraube wird geschraubt, während das andere Ende im Schlitz des Gegenstücks des Beschlags verriegelt wird. Daher ist eine Einreihung in die KN-Codes 7318 12 , 7318 14 oder 7318 15 ausgeschlossen. Die Ware ist daher als andere Waren mit Gewinde aus Stahl in den KN-Code 7318 19 00 einzureihen.
- 7318 19 00 20.06.2011 · Verordnung auf EUR-Lex
Eine Ware, bestehend aus einer Schraube mit einer Unterlegscheibe, einer Spreizankerhülse und einer Mutter, alle Teile aus rostfreiem Stahl.
Die Schraube hat einen sechseckigen Kopf, ist 55 mm lang, hat ein Gewinde über die gesamte Länge und verfügt über eine Zugfestigkeit von 490 MPa. Die Ankerhülse ist 42 mm lang und hat ohne Spreizung einen äußeren Durchmesser von 10 mm. Sie verfügt nicht über ein Gewinde. Die Ware wird zum Befestigen von Gegenständen auf hartem Untergrund, wie z. B. einer Betonmauer, verwen-det, indem zuerst die Ankerhülse mit der Mutter in ein Bohrloch eingeführt und anschließend die Schraube einge-fügt und festgeschraubt wird. Beim Festschrauben der Schraube wird die Mutter in Richtung Schraubenkopf geschraubt, was zur Spreizung der Ankerhülse führt, so dass der Gegen-stand fest auf dem harten Untergrund befestigt wird.
Begründung
Einreihung gemäß den Allgemeinen Vorschriften 1 und 6 für die Aus-legung der Kombinierten Nomenklatur sowie nach dem Wortlaut der KN-Codes 7318 und 7318 19 00 . Die Ware ist keine aus verschiedenen Bestandteilen zusammengesetzte Ware im Sinne der Allgemeinen Vor-schrift 3 b, weil die einzelnen Bestand-teile zusammen ein Einzelerzeugnis bilden, eine Ankerschraube. Daher ist die Einreihung nach dem Bestandteil, der den Charakter der Ware bestimmt, ausgeschlossen. Die Einreihung in die Unterposition 7318 15 als Schraube, auch mit dazu-gehörenden Muttern und Unterleg-scheiben, ist ausgeschlossen, weil die Ankerhülse sich von anderen Waren wie Muttern oder Unterlegscheiben unterscheidet. Aufgrund ihrer Merkmale ist die Ware in den KN-Code 7318 19 00 unter andere Waren mit Gewinde einzureihen.
Britische verbindliche Zolltarifauskünfte zu 7318000000
Auskünfte von HM Revenue & Customs für Waren, deren britischer Warencode so beginnt wie dieser EU-Code. Der britische Zolltarif weicht vom EU-Tarif ab, für die EU sind sie daher nur eine Orientierung.
- UK 7318121090 Gültig vom 22.03.2024 bis 21.03.2027 · Auskunft 600010150 auf GOV.UK
The coloured cladding screws are made from stainless steel. They are designed to be used with wood,plastic composite cladding. They are threaded with a torx head. The screw dimensions are 4mm x 35mm. Packaged in a box – each box contains 100 screws
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading 7318 - Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel GIR 5 (b) - has been used to identify the type of packaging - packaged in a cardboard box. GIR 6 - has been used to classify the goods to subheading level 731812 - Other Wood screws 8 Digit Code - 73181210 - Other wood screws - Of Stainless Steel 10 Digit Code - 7318121090 - Other than for use in certain types of aircraft. Also classified in accordance with: Note 3 to Section XV …
- UK 7318121090 Gültig vom 22.03.2024 bis 21.03.2027 · Auskunft 600010151 auf GOV.UK
Stainless steel screws that offer a secure solution to fixing wood, plastic composite decking boards. Ideal for fixing risers in steps and fixing the final board of your project. The decking screws come in 5 different colours to match your decking boards and guarantee a discreet fixing. Screw dimensions: 5mm x 50mm Each pack contains 100 screws and come packaged in a cardboard box.
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading 7318 - Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel GIR 5 (b) - has been used to identify the type of packaging - packaged in a cardboard box. GIR 6 - has been used to classify the goods to subheading level 731812 - Other Wood screws 8 Digit Code - 73181210 - Other wood screws - Of Stainless Steel 10 Digit Code - 7318121090 - Other than for use in certain types of aircraft. Also classified in accordance with: Note 3 to Section XV …
- UK 7318121090 Gültig vom 22.03.2024 bis 21.03.2027 · Auskunft 600010152 auf GOV.UK
Stainless steel trim screws for fixing corner and skirting trims to decking. The screw is threaded and with a Torx head design. The Trim screws come in 5 different colours to match the decking and gives a secure and clean look when in place. Screw dimensions: 4mm x 35mm. Each pack contains 100 screws and come packaged in a cardboard box.
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading 7318 - Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel GIR 5 (b) - has been used to identify the type of packaging - packaged in a cardboard box. GIR 6 - has been used to classify the goods to subheading level 731812 - Other Wood screws 8 Digit Code - 73181210 - Other wood screws - Of Stainless Steel 10 Digit Code - 7318121090 - Other than for use in certain types of aircraft. Also classified in accordance with: Note 3 to Section XV …
+ 18 weitere
- UK 7318149990 Gültig vom 17.02.2025 bis 16.02.2028 · Auskunft 600012141 auf GOV.UK
The product is a self-tapping threaded screw, material is steel cast zinc alloy finish with a self-drilling plug. The plug is to anchor to the plasterboard.
Begründung
Classification has been determined in accordance with the following: - For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General Interpretative Rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading 7318 - Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel. GIR 3C - Has been used as it is considered there is no essential character and therefore it has been classified to last in numerical order within the tariff- namely the Steel screw. GIR 6 - has been used to classify the goods to subheading level 731814 - Threaded articles; Self-tapping screws. 8 digit code 73181499 - Other than of stainless steel; Other than spaced-thread screws. 10 digit …
- UK 7318149990 Gültig vom 17.02.2025 bis 16.02.2028 · Auskunft 600012142 auf GOV.UK
The product is a steel threaded self-tapping screw, with an additional plastic plug for plasterboard. The head of the screw is flat with cross-recess. The length of the screw is 35mm with a thickness of 4.5mm. Packaged for retail sale.
Begründung
Classification has been determined in accordance with the following: - For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General Interpretative Rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading 7318 - Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel. GIR 3C - Has been used as it is considered there is no essential character and therefore has been classified to last in numerical order within the tariff- namely the Steel screw. GIR 6 - has been used to classify the goods to subheading level 731814 - Threaded articles; Self-tapping screws. 8 digit code 73181499 - Other than of stainless steel; Other than spaced-thread screws. 10 digit …
- UK 7318153590 Gültig vom 08.01.2026 bis 07.01.2029 · Auskunft 600014337 auf GOV.UK
A stainless-steel stud and pin used in construction. A central peg is inserted into a central longitudinal channel of a headless, threaded shank and when struck into the channel with a hammer, it forces stainless-steel quadrants cut into the end of an anchor to splay out. A stainless- steel nut is then tightened on to the top of the shank to secure the stud in place. The studs, together with the pin and bolt are packaged in cardboard boxes.
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 7318 - Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel GIR 5 (b) - Has been used to identify the type of packaging. Carboard boxing GIR 6 - Has been used to classify the goods to subheading level 731815 - Other screws and bolts, whether or not with their nuts or washers 8 Digit Code 73181535 – other than elsewhere specified in this heading; without heads, of stainless steel 10 Digit Code 7318153590 – other than for use in certain types of …
- UK 7318154890 Gültig vom 17.05.2024 bis 16.05.2027 · Auskunft 600010475 auf GOV.UK
Flange Jointing – Stud Bolts and Nuts Studding Material Alloy steel to ASTM A 193 Grade B7 with nuts to ASTM A 194 Grade 2H Standard Supply Stud Bolt coating PTFE over a metallic substrate to provide both good corrosion resistance and low friction characteristics. Packaged- Cardboard Box ; Wooden Crate
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading – 7318 - Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel GIR 5 (b) - has been used to identify the type of packaging. GIR 6 - has been used to classify the goods to subheading level - 731815 – Threaded articles – other screws and bolts, whether or not with their nuts or washers 8 Digit code – 73181548 – Other, without heads - of 800 MPa or more 10 Digit code – 7318154890 – Other than for use in certain types of aircraft Also classified in …
- UK 7318154890 Gültig vom 27.01.2026 bis 26.01.2029 · Auskunft 600014339 auf GOV.UK
A carbon-steel stud and pin used in construction. A central peg is inserted into a central longitudinal channel of a headless, threaded shank and when struck into the channel with a hammer, it forces carbon-steel quadrants cut into the end of an anchor to splay out. A carbon-steel nut is then tightened on to the top of the shank to secure the stud in place. The studs, together with the pin and bolt are packaged in cardboard boxes.
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 7318 - Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel GIR 5 (b) - Has been used to identify the type of packaging. Packaged in cardboard boxes GIR 6 - Has been used to classify the goods to subheading level 731815 - Other screws and bolts, whether or not with their nuts or washers 8 Digit Code 73181548 – other than elsewhere specified in this heading; without heads, other, with tensile strength of 800 mpa or more 10 Digit Code 7318154890 – other …
- UK 7318157590 Gültig vom 18.06.2026 bis 17.06.2029 · Auskunft 600015618 auf GOV.UK
Super Duplex Stainless Steel Fasteners Bolts Various size bolts that are high strength stainless steel fasteners manufactured at material grade S32760 and designed for use in harsh, corrosive environments They are hot forged and head formed under high pressure followed by machining. Commonly used in offshore energy applications, such as securing parts for offshore wind projects. Supplied in boxes
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIRs): GIR 1- Has been used to classify this product by the terms of heading – 7318 Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and other similar articles, of iron and steel. GIR 6 - has been used to classify the goods to subheading level 731815 Threaded articles : Other screws and bolts, whether or not with their nuts or washers. 8 Digit Code – 73181575 Other than for fixing railway track construction material; With heads; Hexagonal heads; of Stainless Steel. 10 Digit Code – 7318157590 Other than for use in civil aircraft. Also classified in accordance with: …
- UK 7318159589 Gültig vom 02.01.2025 bis 01.01.2028 · Auskunft 600012053 auf GOV.UK
Steel Lockbolt Pin and Collar The two part system comprises a pin with defined breakneck groove and a collar. Pin is inserted in the prepared hole and collar is placed over the locking grooves. Used as an secure vibration free locking fastener These can be used in securing car seats Manufactured from Steel using cold forging presses The pin goes through two pieces of material (metal) the collar is then slid over the pin and swaged into place making it fully secure and un moveable. It is packed in cardboard boxes for shipment.
Begründung
For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading – 7318 Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and other similar articles, of iron and steel GIR 5 (b) has been used to identify the type of packaging. GIR 6 - has been used to classify the goods to subheading level 731815 – Other screws and bolts, whether or not with their nuts or washers Eight digit code – 73181595 Other than elsewhere specified in this heading Ten digit code – 7318159589 Other than for use in civil aircraft; Other than of stainless steel Also classified in accordance with: Chapter 83 Note 1 Section XV Note 2(a) Harmonised …
- UK 7318159589 Gültig vom 03.06.2025 bis 02.06.2028 · Auskunft 600013112 auf GOV.UK
A Seat button/knob. Made from 90% plastic (acrylonitrile butadiene styrene) and 10% metal (steel). The button has plastic top for turning and pulling up/pushing down, the metal part making the connection. Pulling up and turning the knob allows the seat to be adjusted and pushing down locks the seat in place. Used as a replacement part for stationary bike (exercise bike).
Begründung
For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 7318 - Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and other similar articles, of iron and steel. GIR 6 has been used to classify the goods to subheading level 731815 - Threaded articles; other screws and bolts, whether or not with their nuts or washers. Eight digit code 73181595 - Other than for fixing railway track construction material specified in this heading; with heads; other than elsewhere specified. Ten digit code – 7318159589 Other than for use in civil aircraft; Other than of stainless steel. Also classified in accordance with: Section …
- UK 7318159589 Gültig vom 20.07.2026 bis 19.07.2029 · Auskunft 600015864 auf GOV.UK
This product is a threaded bolt that is made from steel, is 10mm in diameter and has a 20mm flat head but no screw fixing. This bolt is used to hold two parts of a pulley unit together.
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect –a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIRs): GIR 1 - Has been used to classify this product by the terms of heading – 7318 Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and other similar articles, of iron and steel. GIR 6 - Has been used to classify the goods to subheading level 731815 – Other screws and bolts, whether or not with their nuts or washers. 8 Digit Code – 73181595 Other than elsewhere specified in this heading. 10 Digit Code – 7318159589 Other than for use in civil aircraft; Other than of stainless steel. Also classified in accordance with: Section notes 3 to section XV. Harmonised …
- UK 7318163990 Gültig vom 17.02.2026 bis 16.02.2029 · Auskunft 600014972 auf GOV.UK
A metal threaded nut. It is made from stainless steel castings 304/304L/316/316L, it is round in shape with grooves and is engraved. It is used to screw a connection union together in either a pipeline or into a machine. Normally packaged in boxes of 10.
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 7318: Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel GIR 5 (b) has been used to identify the type of packaging: Normally packaged in boxes of 10 GIR 6 has been used to classify the goods to subheading 731816: Threaded articles; Nuts 8 Digit Code: 73181639 - Of stainless steel; Other than blind rivet nuts 10 Digit Code: 7318163990 - Other than for use in certain types of aircraft Also classified in accordance with: Harmonized System Explanatory …
- UK 7318163990 Gültig vom 18.06.2026 bis 17.06.2029 · Auskunft 600015617 auf GOV.UK
Super Duplex Stainless Steel Fasteners Nuts Various size nuts that are manufactured from S32760 high-strength stainless steel, these fasteners are designed for harsh, corrosive environments. They are formed hot or cold, with internal threads produced by tapping. Commonly used in offshore energy applications, such as securing parts for offshore wind projects. Supplied in boxes
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIRs): GIR 1 - Has been used to classify this product by the terms of heading 7318: Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel. GIR 5 (b) - Has been used to identify the type of packaging – Boxes. GIR 6 - Has been used to classify the goods to subheading 731816: Threaded articles; Nuts. 8 Digit Code 73181639 - Of stainless steel; Other than blind rivet nuts. 10 Digit Code 7318163990 - Other than for use in certain types of aircraft. Also classified in accordance with: Section Note XV Note 3. Harmonised System …
- UK 7318169290 Gültig vom 20.07.2026 bis 19.07.2029 · Auskunft 600015860 auf GOV.UK
A threaded nut made from steel. It is used on a tensioner pulley bearing. It is a fastener that keeps the pulley on the bracket with its mating bolt.
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect –a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIRs): GIR 1 - Has been used to classify this product by the terms of heading 7318 - Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel. GIR 6 - Has been used to classify the goods to sub-heading 7318 16 – Nuts. 8 Digit Code - 73181692 Other than elsewhere specified in this subheading; with an inside diameter not exceeding 12mm. 10 Digit Code - 7318169290 Other than for use in certain types of aircraft. Also classified in accordance with: Section notes 3 to section XV. Harmonised System Explanatory Notes (HSEN) note (A) to Heading …
- UK 7318169990 Gültig vom 27.10.2026 bis 26.10.2029 · Auskunft 600016097 auf GOV.UK
A tapered, internally threaded fastening nut made from non-stainless steel, designed for use within a locomotive flexible drive coupling assembly during wheelset changes. The article is supplied separately as a replacement fastener and is identified within the complete coupling assembly as the green taper sleeve. It has a cylindrical upper section, a wider tapered base and an M18 internal screw thread running throughout the entire bore. The article has no self-locking mechanism, bearing surface, sensor or other functional feature beyond fastening.
Begründung
Classification has been determined in accordance with the following: - For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 7318 - Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel. GIR 6 - Has been used to classify the goods to subheading level. 731816 - threaded articles; nuts. 8-digit code 73181699 - other than of stainless steel; other, with an inside diameter exceeding 12mm. 10-digit code 7318169990 - other than for use in certain types of aircraft. Also classified in accordance with: Section XV Note 2 (a). Section XV Note 3. Section XVII Note 2(b). Harmonized …
- UK 7318190090 Gültig vom 02.02.2026 bis 01.02.2029 · Auskunft 600014681 auf GOV.UK
Replacement M8 toggle for quick fit frames. Ideal for refurbishing frames where toggles have been damaged or lost. Attach metal sign faces quickly and easily with these toggle fittings. Made of Mild Steel and are used for Road Frame Signs Thread Size - M8 - 38mm thread length
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 Has been used to classify this product by the terms of heading 7318 - screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel GIR 6 - has been used to classify the goods to subheading level - 731819 - threaded articles; other than elsewhere specified within this subheading 10 Digit code - 7318190090 - other than for use in certain types of aircraft Also classified in accordance with: Section Note 3 to Section XV Harmonised System Explanatory Notes (HSENs) to heading 7318
- UK 7318220091 Gültig vom 27.11.2025 bis 26.11.2028 · Auskunft 600013847 auf GOV.UK
This product is pressed from Stainless Steel, and is used for packing to adjust the tail length of a clamp to meet differing beam flange thicknesses. The trader has confirmed it can be described as a clipped washer. It is not a spring washer or locked washer and is not for use with aircraft. Packaged into branded boxes in either 25 or 50 pieces per box depending on the size.
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General Interpretative Rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 7318 - Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel GIR 5 (b) has been used to identify normal packaging for transport GIR 6 has been used to classify the goods to subheading level 731822 - Other washers 10 Digit Code 7318220091 - other than for use in certain types of aircraft - of stainless steel Also classified in accordance with : Harmonised System Explanatory Notes (HSENs) to heading 7318 Note (E)
- UK 7318220091 Gültig vom 18.06.2026 bis 17.06.2029 · Auskunft 600015619 auf GOV.UK
Super Duplex Stainless Steel Fasteners Washers These high-strength fasteners, made from S32760 stainless steel, are designed for harsh, corrosive environments. Stamped from plate or sheet metal, threads are cut, and components undergo heat treatment to restore corrosion resistance and duplex microstructure. Finishing steps include pickling and passivation. Each part is inspected for tensile strength, yield, and hardness. Used in the offshore energy industry to secure components. Supplied in boxes.
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General Interpretative Rules (GIRs): GIR 1 Has been used to classify this product by the terms of heading 7318 - Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel. GIR 5 (b) Has been used to identify normal packaging for transport -Boxes. GIR 6 Has been used to classify the goods to subheading level 731822 - Other washers. 10 Digit Code 7318220091 - other than for use in certain types of aircraft - of stainless steel. Also classified in accordance with: Section Note XV Note 3. Harmonised System Explanatory Notes (HSENs) note (E) to heading 7318.
- UK 7318220098 Gültig vom 11.10.2024 bis 10.10.2027 · Auskunft 600011259 auf GOV.UK
Maintenance kit consisting of nylon D-Ring clip x 2, nylon insert lock nut that is made from nylon (polyamide, no metal is included) x 2, mild steel pozi drive pan head screw x 2, nylon insulation sleeve x 2, and mild steel flat washer x 4 which are not made in Malaysia. All placed in a clear plastic labelled bag. The kit is a field maintenance kit for this company's smoke sensitivity tester. This kit is just the parts in a plastic bag and then placed in a shipping carton. This ‘spares’ kit is merely a bunch of spare components that are commonly used on the main body/unit. The D clips are generic and all the components in the kit are not assembled together to form a new part.
Begründung
Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 7318: Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel GIR 3C has been used as it is considered there is no essential character and therefore has been classified to last in numerical order within the Tariff GIR 5B - Has been used to identify the type of packaging; clear plastic labelled bag GIR 6 - Has been used to classify the goods to subheading level 731822: Non-threaded articles; Other washers 10 Digit code 7318220098: Other than for use in …
- UK 7318220098 Gültig vom 20.07.2026 bis 19.07.2029 · Auskunft 600015863 auf GOV.UK
This product is a washer that is made from a mild steel plate and is used in a pulley unit between the nut and the surface.
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect –a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIRs): GIR 1 - Has been used to classify this product by the terms of heading 7318 - Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel. GIR 6 - Has been used to classify the goods to sub-heading – 731822 Other washers; Other than spring washers and other lock washers. 10 Digit Code – 7318220098 Other than consigned from Malaysia. Also classified in accordance with: Section notes 3 to section XV. Harmonised System Explanatory Notes (HSEN) note (E) to Heading 7318.
Quelle: HM Revenue & Customs, Advance Tariff Rulings. Enthält Informationen des öffentlichen Sektors unter der Open Government Licence v3.0.
Beschränkungen und Hinweise für 7318000000
- CBAM: CO2-Grenzausgleich Verordnung (EU) 2023/956, Anhang I 7318
Sektor: Eisen und Stahl
Rechtsakt auf EUR-Lex lesen - Russland-Sanktionen: Einfuhrverbot Verordnung (EU) Nr. 833/2014, Anhang XVII 7318
Art. 3g, Eisen- und Stahlerzeugnisse
Rechtsakt auf EUR-Lex lesen - Russland-Sanktionen: Ausfuhrverbot Verordnung (EU) Nr. 833/2014, Anhang XXIII 7318
Art. 3k, Güter, die zur Stärkung der industriellen Kapazitäten Russlands beitragen könnten
Rechtsakt auf EUR-Lex lesen - Russland-Sanktionen: Ausfuhrverbot Verordnung (EU) Nr. 833/2014, Anhang XXIII 7318
Art. 3k, Güter, die zur Stärkung der industriellen Kapazitäten Russlands beitragen könnten. nur ein Teil des Codes: Schrauben, Bolzen, Muttern, Schwellenschrauben, Schraubhaken, Niete, Splinte, Keile, Unterlegscheib...
Rechtsakt auf EUR-Lex lesen
Nur zur Orientierung. Prüfen Sie den Rechtsakt, bevor Sie sich auf einen Hinweis verlassen; Schwellenwerte, Ausnahmen und Genehmigungen sind nicht vollständig abgebildet.
Einfuhrumsatzsteuer in der EU
- Belgien 21 % ggf. 6 %
- Bulgarien 20 %
- Dänemark 25 %
- Deutschland 19 %
- Estland 24 %
- Finnland 25,5 %
- Frankreich 20 %
- Griechenland 24 %
- Irland 23 %
- Italien 22 %
- Kroatien 25 %
- Lettland 21 %
- Litauen 21 %
- Luxemburg 17 %
- Malta 18 %
- Niederlande 21 %
- Österreich 20 %
- Polen 23 %
- Portugal 23 %
- Rumänien 21 %
- Schweden 25 %
- Slowakei 23 %
- Slowenien 22 %
- Spanien 21 %
- Tschechien 21 %
- Ungarn 27 %
- Zypern 19 %
Normalsatz je Mitgliedstaat auf Zollwert, Zoll und Transportkosten bis zum Bestimmungsort. Ermäßigte Sätze hängen oft von Verwendung oder Abnehmer ab und gelten nur, wenn das Land sie für die Ware vorsieht. Quelle: Europäische Kommission, Taxes in Europe Database, Stand 02.11.2026.
Ursprungsregeln
Die Präferenzursprungsregeln für die Unterposition 731800 hängen vom Handelsabkommen ab. Die Kommission veröffentlicht sie in Access2Markets.
Ursprungsregeln bei Access2MarketsInformationen
Wenn Sie "Schrauben, Bolzen, Muttern, Schwellenschrauben, Schraubhaken, Niete, Splinte, Keile, Unterlegscheiben (einschließlich Federringe und -scheiben) und ähnliche Waren, aus Eisen oder Stahl" importieren oder exportieren, ist es wichtig, den richtigen HS-Code oder TARIC-Code zu haben. Der HS-Code 7318000000 80 ist der Standardcode für dieses Produkt und stellt sicher, dass die richtigen Zölle und Abgaben bei einer Überquerung internationaler Grenzen angewendet werden.
Um sicherzustellen, dass Ihre Geschäftsabwicklung bei der Einfuhr oder Ausfuhr von "Schrauben, Bolzen, Muttern, Schwellenschrauben, Schraubhaken, Niete, Splinte, Keile, Unterlegscheiben (einschließlich Federringe und -scheiben) und ähnliche Waren, aus Eisen oder Stahl" reibungslos verläuft, sollten Sie folgende Punkte beachten:
- Informieren Sie sich über die spezifischen Einfuhr- und Ausfuhrbestimmungen in den beteiligten Ländern. Dazu gehören mögliche Beschränkungen, Steuern und Zölle, die auf "Schrauben, Bolzen, Muttern, Schwellenschrauben, Schraubhaken, Niete, Splinte, Keile, Unterlegscheiben (einschließlich Federringe und -scheiben) und ähnliche Waren, aus Eisen oder Stahl" anwendbar sind.
- Prüfen Sie, ob zusätzliche Lizenzen, Genehmigungen oder Zertifikate erforderlich sind, um "Schrauben, Bolzen, Muttern, Schwellenschrauben, Schraubhaken, Niete, Splinte, Keile, Unterlegscheiben (einschließlich Federringe und -scheiben) und ähnliche Waren, aus Eisen oder Stahl" in das Zielland zu importieren oder aus dem Herkunftsland zu exportieren.
- Achten Sie darauf, dass Ihre Handelspartner über gültige Identifikationsnummern verfügen, wie zum Beispiel die EORI-Nummer (Economic Operators Registration and Identification) in der EU, um den Handel effizienter zu gestalten und Verzögerungen zu minimieren.
- Stellen Sie sicher, dass alle handels- und zollrelevanten Dokumente (wie Handelsrechnungen, Packlisten, Ursprungszertifikate und Versicherungspolicen) korrekt ausgefüllt sind und den jeweiligen nationalen Vorschriften entsprechen.
- Behalten Sie die aktuellen Wechselkurse sowie die Kosten für Verpackung, Versand und Versicherung im Blick, um eine genaue Kalkulation der Handelskosten durchzuführen.
Zusammenfassend lautet der HS-Code oder TARIC-Code für "Schrauben, Bolzen, Muttern, Schwellenschrauben, Schraubhaken, Niete, Splinte, Keile, Unterlegscheiben (einschließlich Federringe und -scheiben) und ähnliche Waren, aus Eisen oder Stahl" 7318000000 80. Stellen Sie sicher, dass Sie diesen Code in all Ihren Handels- und Zolldokumenten korrekt verwenden, um eine reibungslose und problemlose Transaktion zu gewährleisten. Mit diesen Tipps sind Sie besser auf die Herausforderungen im internationalen Handel vorbereitet und können erfolgreich "Schrauben, Bolzen, Muttern, Schwellenschrauben, Schraubhaken, Niete, Splinte, Keile, Unterlegscheiben (einschließlich Federringe und -scheiben) und ähnliche Waren, aus Eisen oder Stahl" importieren und exportieren.
HS-Code Struktur
1. HS Kapitel
Es gibt 21 unterschiedliche Abschnitte, die in 96 Kapitel unterteilt sind. Ausnahmekapitel beinhalten Kapitel 77, welches für zukünftige Nutzung reserviert ist, Kapitel 98 und 99, die auf nationaler Ebene begrenzt sind, und Kapitel 99, welches ein spezifischer Code für temporäre Änderungen ist. Im obigen Beispiel wurde Kapitel 73 ausgewählt, für waren aus eisen oder stahl
2. HS Position
Die Überschrift bestimmt die spezifische Kategorie innerhalb eines bestimmten Kapitels. Im obigen Beispiel bezieht sich die 18 auf Schrauben, Bolzen, Muttern, Schwellenschrauben, Schraubhaken, Niete, Splinte, Keile, Unterlegscheiben (einschließlich Federringe und -scheiben) und ähnliche Waren, aus Eisen oder Stahl.
HS-Code Baumstruktur
7300000000 80
HS Kapitel WAREN AUS EISEN ODER STAHL
7318000000 80
Schrauben, Bolzen, Muttern, Schwellenschrauben, Schraubhaken, Niete, Splinte, Keile, Unterlegscheiben (einschließlich Federringe und -scheiben) und ähnliche Waren, aus Eisen oder Stahl
7318110000 10
- Waren mit Gewinde
7318110000 80
- - Schwellenschrauben
7318120000 80
- - andere Holzschrauben
7318121000 80
- - - aus nicht rostendem Stahl
7318121010 80
- - - - für bestimmte Luftfahrzeuge
7318121090 80
- - - - andere
7318129000 80
- - - andere
7318129010 80
- - - - für bestimmte Luftfahrzeuge
7318129090 80
- - - - andere
7318130000 80
- - Schraubhaken, Ring- und Ösenschrauben
7318130010 80
- - - für bestimmte Luftfahrzeuge
7318130090 80
- - - andere
7318140000 80
- - gewindeformende Schrauben
7318141000 80
- - - aus nicht rostendem Stahl
7318141010 80
- - - - für bestimmte Luftfahrzeuge
7318141090 80
- - - - andere
7318149100 10
- - - andere
7318149100 80
- - - - Blechschrauben
7318149110 80
- - - - - für bestimmte Luftfahrzeuge
7318149190 80
- - - - - andere
7318149900 80
- - - - andere
7318149910 80
- - - - - für bestimmte Luftfahrzeuge
7318149990 80
- - - - - andere
7318150000 80
- - andere Schrauben und Bolzen, auch mit dazugehörenden Muttern oder Unterlegscheiben
7318152000 80
- - - zum Befestigen von Oberbaumaterial für Bahnen
7318153500 10
- - - andere
7318153500 20
- - - - ohne Kopf
7318153500 80
- - - - - aus nicht rostendem Stahl
7318153510 80
- - - - - - für bestimmte Luftfahrzeuge
7318153590 80
- - - - - - andere
7318154200 10
- - - - - andere, mit einer Zugfestigkeit von
7318154200 80
- - - - - - weniger als 800 MPa
7318154210 80
- - - - - - - für bestimmte Luftfahrzeuge
7318154290 80
- - - - - - - andere
7318154800 80
- - - - - - 800 MPa oder mehr
7318154810 80
- - - - - - - für bestimmte Luftfahrzeuge
7318154890 80
- - - - - - - andere
7318155200 10
- - - - mit Kopf
7318155200 20
- - - - - mit Schlitz oder Kreuzschlitz
7318155200 80
- - - - - - aus nicht rostendem Stahl
7318155210 80
- - - - - - - für bestimmte Luftfahrzeuge
7318155290 80
- - - - - - - andere
7318155800 80
- - - - - - andere
7318155810 80
- - - - - - - Hi-Loks (Bolzen, auch mit dazugehörenden, nach dem Festschrauben unlösbar verbundenen Muttern)
7318155860 10
- - - - - - - andere
7318155860 80
- - - - - - - - für bestimmte Luftfahrzeuge
7318155890 80
- - - - - - - - andere
7318156200 10
- - - - - mit Innensechskant
7318156200 80
- - - - - - aus nicht rostendem Stahl
7318156210 80
- - - - - - - für bestimmte Luftfahrzeuge
7318156290 80
- - - - - - - andere
7318156800 80
- - - - - - andere
7318156810 80
- - - - - - - Hi-Loks (Bolzen, auch mit dazugehörenden, nach dem Festschrauben unlösbar verbundenen Muttern)
7318156860 10
- - - - - - - andere
7318156860 80
- - - - - - - - für bestimmte Luftfahrzeuge
7318156890 80
- - - - - - - - andere
7318157500 10
- - - - - mit Außensechskant
7318157500 80
- - - - - - aus nicht rostendem Stahl
7318157510 80
- - - - - - - für bestimmte Luftfahrzeuge
7318157590 80
- - - - - - - andere
7318158200 10
- - - - - - andere, mit einer Zugfestigkeit von
7318158200 80
- - - - - - - weniger als 800 MPa
7318158210 80
- - - - - - - - Hi-Loks (Bolzen für dazugehörige, nach dem Verschrauben unlösbar verbundene Muttern)
7318158260 10
- - - - - - - - andere
7318158260 80
- - - - - - - - - für bestimmte Luftfahrzeuge
7318158290 80
- - - - - - - - - andere
7318158800 80
- - - - - - - 800 MPa oder mehr
7318158860 80
- - - - - - - - für bestimmte Luftfahrzeuge
7318158880 80
- - - - - - - - andere
7318159500 80
- - - - - andere
7318159511 10
- - - - - - für bestimmte Luftfahrzeuge
7318159511 80
- - - - - - - aus nicht rostendem Stahl
7318159519 80
- - - - - - - andere
7318159585 10
- - - - - - andere
7318159585 80
- - - - - - - aus nicht rostendem Stahl
7318159589 80
- - - - - - - andere
7318160000 80
- - Muttern
7318163100 10
- - - aus nicht rostendem Stahl
7318163100 80
- - - - Blindnietmuttern
7318163110 80
- - - - - für bestimmte Luftfahrzeuge
7318163190 80
- - - - - andere
7318163900 80
- - - - andere
7318163910 80
- - - - - für bestimmte Luftfahrzeuge
7318163990 80
- - - - - andere
7318164000 10
- - - andere
7318164000 80
- - - - Blindnietmuttern
7318164010 80
- - - - - für bestimmte Luftfahrzeuge
7318164090 80
- - - - - andere
7318166000 80
- - - - Sicherungsmuttern
7318166010 80
- - - - - für bestimmte Luftfahrzeuge
7318166090 80
- - - - - andere
7318169200 10
- - - - andere, mit einer Lochweite von
7318169200 80
- - - - - 12 mm oder weniger
7318169210 80
- - - - - - für bestimmte Luftfahrzeuge
7318169290 80
- - - - - - andere
7318169900 80
- - - - - mehr als 12 mm
7318169920 80
- - - - - - für bestimmte Luftfahrzeuge
7318169990 80
- - - - - - andere
7318190000 80
- - andere
7318190020 80
- - - für bestimmte Luftfahrzeuge
7318190090 80
- - - andere
7318210000 10
- Waren ohne Gewinde
7318210000 80
- - Federringe und -scheiben und andere Sicherungsringe und -scheiben
7318210021 10
- - - für bestimmte Luftfahrzeuge
7318210021 80
- - - - aus nicht rostendem Stahl
7318210031 10
- - - - andere
7318210031 80
- - - - - versandt aus Malaysia
7318210039 80
- - - - - andere
7318210091 10
- - - andere
7318210091 80
- - - - aus nicht rostendem Stahl
7318210095 10
- - - - andere
7318210095 80
- - - - - versandt aus Malaysia
7318210098 80
- - - - - andere
7318220000 80
- - andere Unterlegscheiben
7318220021 10
- - - für bestimmte Luftfahrzeuge
7318220021 80
- - - - aus nicht rostendem Stahl
7318220039 80
- - - - andere
7318220091 10
- - - andere
7318220091 80
- - - - aus nicht rostendem Stahl
7318220098 80
- - - - andere
7318230000 80
- - Niete
7318230020 80
- - - für bestimmte Luftfahrzeuge
7318230090 80
- - - andere
7318240000 80
- - Splinte und Keile
7318240020 80
- - - für bestimmte Luftfahrzeuge
7318240040 80
- - - Rohrleitungszugsicherungselemente -aus rostfreiem Stahl der Spezifikation 17-4PH oder aus Stahl der Spezifikation Toolsteel S7, -per Metallpulverspritzgussverfahren (Metal Injection Moulding) hergestellt, -mit einer Rockwell-Härte von 38 HRC (± 1) oder 53 HRC (+2/ - 1), -mit Abmessungen von 7 mm x 4 mm x 5 mm oder mehr, jedoch nicht mehr als 40 mm x 20 mm x 10 mm
7318240090 80
- - - andere
7318290000 80
- - andere
7318290020 80
- - - für bestimmte Luftfahrzeuge
7318290090 80
- - - andere