Import Handelsbeschränkungen für 7412200000 80
Zölle für weitere Codes mit kostenlosem Konto
Sie haben heute 10 Codes mit Zollsätzen angesehen. Melden Sie sich kostenlos an, um Zölle, Maßnahmen und den Verlauf aller Codes zu sehen.
Präferenzursprungsregeln für 7412200000
Was eine Ware erfüllen muss, um als Ursprungsware eines Partnerlandes zu gelten und den Präferenzzoll zu erhalten, je Abkommen. Wortlaut der Abkommen auf Englisch.
Autonomous Trade Preferences (Western Balkans) · Kosovo
EU-Chile Association Agreement · Chile
EU-Algeria Association Agreement · Algerien
EU-Egypt Association Agreement · Ägypten
EU-Jordan Association Agreement · Jordanien
EU-Morocco Association Agreement · Marokko
EU-Tunisia Association Agreement · Tunesien
Copper and articles thereof; except for: / or: Manufacture: from materials of any heading, except that of the product, and in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
EU-Colombia/Peru/Ecuador Trade Agreement · Ecuador, Kolumbien, Peru
Generalised Scheme of Preferences (GSP, GSP+, EBA) · Armenien, Indien, Kenia, Pakistan, Salomonen, Samoa, Syrien, Vietnam
EU-Jordan Association Agreement (relaxed rules, 2016) · Jordanien
EU-Singapore FTA · Singapur
Copper and articles thereof; except for: / or: Manufacture from materials of any heading, except that of the product
EU-Korea FTA · Südkorea
EU-Viet Nam FTA · Vietnam
Copper and articles thereof; except for: / or: Manufacture from materials of any heading, except that of the product.
EU-Canada CETA · Kanada
A change from any other heading.
EPA CARIFORUM
Copper and articles thereof; except for: / or: Manufacture in which: – all the materials used are classified within a heading other than that of the product; – the value of all the materials used does not exceed 50 % of the ex-works price of the product
EU Market Access Regulation (EPA) · Côte d’Ivoire, Ghana, Kamerun, Kenia
Copper and articles thereof; except for: / or: Manufacture in which: all the materials used are classified within a heading other than that of the product; the value of all the materials used does not exceed 50 % of the ex-works price of the product
EU-Japan EPA · Japan
CTH
EU-Lebanon Association Agreement · Libanon
Copper and articles thereof; except for: / or: Manufacture: from materials of any heading, except that of the product, in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
EU-Mexico Global Agreement · Mexiko
Copper and articles thereof; except for: / or: Manufacture in which: all the materials used are classified within a heading other than that of the product, the value of all the materials used does not exceed 50 % of the ex-works price of the product
EU-Palestine Interim Association Agreement · Palästina
Copper and articles thereof; except for: / or: Manufacture in which: all the materials used are classified within a heading other than that of the product; the value of all the materials used does not exceed 50% of the ex-works price of the product
Quelle: Europäische Kommission, Access2Markets (CC BY 4.0, gekürzt). Maßgeblich ist der Text des Abkommens. Access2Markets
Anmerkungen und Erläuterungen zu 7412200000
Anmerkungen zu Kapitel 74
Anmerkung Unterpositions-Anmerkung 1. Im Sinne des Kapitels 74 gelten als: a) Kupfer-Zink-Legierungen (Messing): Legierungen aus Kupfer und Zink, auch mit anderen Elementen. Sind andere Elemente vorhanden, — muss Zink gegenüber jedem dieser anderen Elemente gewichtsmäßig vorherrschen; — muss ein etwaiger Nickelgehalt weniger als 5 GHT betragen (siehe Kupfer-Nickel-Zink-Legierungen (Neusilber)); — muss ein etwaiger Zinngehalt weniger als 3 GHT betragen (siehe Kupfer-Zinn-Legierungen (Bronze)). b) Kupfer-Zinn-Legierungen (Bronze): Legierungen aus Kupfer und Zinn, auch mit anderen Elementen. Sind andere Elemente vorhanden, muss Zinn gegenüber jedem dieser anderen Elemente gewichtsmäßig vorherrschen. Beträgt der Zinngehalt jedoch 3 GHT oder mehr, darf der Zinkgehalt gegenüber dem Zinngehalt vorherrschen, sofern er weniger als 10 GHT beträgt. c) Kupfer-Nickel-Zink-Legierungen (Neusilber): Legierungen aus Kupfer, Nickel und Zink, auch mit anderen Elementen. Der Nickelgehalt muss 5 GHT oder mehr betragen (siehe Kupfer-Zink-Legierungen (Messing)). d) Kupfer-Nickel-Legierungen (Kupfernickel): Legierungen aus Kupfer und Nickel, auch mit anderen Elementen, jedoch nur 1 GHT oder weniger Zink enthaltend. Sind andere Elemente vorhanden, muss Nickel gegenüber jedem dieser anderen Elemente gewichtsmäßig vorherrschen.
Quellen: Kombinierte Nomenklatur 2026, Anhang I der Verordnung (EWG) Nr. 2658/87 (CELEX 32025R1926), und die Erläuterungen zur Kombinierten Nomenklatur (CELEX 02019XC0329(02)-20260213). Die Abschnitts- und Kapitelanmerkungen sind rechtsverbindlich, die Erläuterungen sind Auslegungshilfen. EUR-Lex
Britische verbindliche Zolltarifauskünfte zu 7412200000
Auskünfte von HM Revenue & Customs für Waren, deren britischer Warencode so beginnt wie dieser EU-Code. Der britische Zolltarif weicht vom EU-Tarif ab, für die EU sind sie daher nur eine Orientierung.
- UK 7412200000 Gültig vom 06.02.2024 bis 05.02.2027 · Auskunft 600009637 auf GOV.UK
A PushFit 10mm and 12mm Euro Conus. The PushFit system is a quick, professional way to connect the supply and return pipes of the SpeeTube heating pipe to the manifold with the benefit being it encloses the heating pipe instead of squeezing it the way a compression connector does. Because the heating pipe is not constricted, there is less resistance allowing a higher rate of flow and preventing blockages. The connector is made of nickel-plated brass, the push fit (red part) is plastic and there is a black rubber ring on the opposite end. The dimensions of the Conus 10 box are 5x15x15cm with a weight of 10.92kg and the Conus12 box 15x15x15cm weighing 10.25kg
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 7412 - Copper tube or pipe fittings (for example, couplings, elbows, sleeves) GIR 5 (b) has been used to identify the type of packaging used - Box GIR 6 has been used to classify the goods to subheading level 741220 - Of copper alloys Also classified in accordance with: Harmonised System Explanatory Note (HSENs) to heading 7412 and Note 3 to Section XV
- UK 7412200000 Gültig vom 06.02.2024 bis 05.02.2027 · Auskunft 600009638 auf GOV.UK
The product is a push-fit connector. It is made from brass and is nickel plated. Comprising the pipe-fitting itself, the push-fit rings which are made from plastic and an 0-ring made from rubber. It functions by serving as part of an under-floor heating system supplying hot water to the necessary parts. It takes a single feed and splits it into two individual feeds. Weight per item is 204 grams
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 7412 - Copper tube or pipe fittings (for example, couplings, elbows, sleeves) GIR 5 (b) has been used to identify normal packaging for transport GIR 6 has been used to classify the goods to sub-heading 7412 20 – of copper alloys Also classified in accordance with :- Harmonised Standard Explanatory Notes (HSENs) to heading – 7412
- UK 7412200000 Gültig vom 05.02.2024 bis 04.02.2027 · Auskunft 600009639 auf GOV.UK
A 10mm & 12mm Reparation coupling. The system is a quick, professional way to connect the supply and return pipes of the heating pipe to the manifold. The connector encloses the heating pipe instead of squeezing it the way a compression connector does. Due to the heating pipe not being constricted, there is less resistance. The lower resistance allows a higher rate of flow and prevents blockages. The system can be connected and disconnected quickly. It can be easily removed by pressing the red plastic ring and simultaneously pulling the heating pipe out of the coupling. The system consists of a single coupling, a double (splitter) coupling and a repair coupling with plastic packaging. Product Specifications 10mm cone 1 group 3/4" 10 x 1.3 and 12mm cone 1 group 3/4" 12 x 1.5. Weight -25 and 36Gram(g) Country -NL Material - Brass with chrome finish 59-62% Copper 35.5-39% Zinc Lead 1.5-3.7%
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) GIR 1 has been used to classify this product by the terms of heading 7412 - Copper tube or pipe fittings (for example, couplings, elbows, sleeves) GIR 5 (b) Has been used to identify the type of packaging. GIR 6 has been used to classify the goods to subheading level 741220 - of copper alloys Also classified in accordance with:- Note 1 (b) to Chapter 74 Harmonised System Explanatory Notes (HSENs) to heading 7412
+ 1 weitere
- UK 7412200000 Gültig vom 06.02.2024 bis 05.02.2027 · Auskunft 600009643 auf GOV.UK
This particular item is a 3/4" inside thread Endcap made of brass, designed for heating purposes and is resistance against corrosion. Capable of withstanding ductility at high temperatures and has low magnetic permeability, along with the ability to withstand pressure. It is highly durable and offers a prolonged lifespan. The material used is brass with a chrome finish, and it weighs 36 grams. Packaged - Box 10 x 10x12cm
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 7412 - Copper tube or pipe fittings (for example, couplings, elbows, sleeves) GIR 5 (b) has been used to identify the type of packaging used - Box GIR 6 has been used to classify the goods to subheading level 741220 - Of copper alloys Also classified in accordance with: Note 3 to Section XV Harmonised System Explanatory Note (HSENs) to heading 7412
Quelle: HM Revenue & Customs, Advance Tariff Rulings. Enthält Informationen des öffentlichen Sektors unter der Open Government Licence v3.0.
Beschränkungen und Hinweise für 7412200000
- Russland-Sanktionen: Ausfuhrverbot Verordnung (EU) Nr. 833/2014, Anhang XXIII 7412
Art. 3k, Güter, die zur Stärkung der industriellen Kapazitäten Russlands beitragen könnten. nur ein Teil des Codes: Kupfer und Waren daraus, ausgenommen KN-Code 7401 00 00 (im Anhang als Kapitel 74)
Rechtsakt auf EUR-Lex lesen
Nur zur Orientierung. Prüfen Sie den Rechtsakt, bevor Sie sich auf einen Hinweis verlassen; Schwellenwerte, Ausnahmen und Genehmigungen sind nicht vollständig abgebildet.
EU-Handel 2025 für 7412200000
- Einfuhren aus Drittländern
- 698,7 Mio. €
- 50.188 t
- Ausfuhren in Drittländer
- 688,3 Mio. €
Wichtigste Ursprungsländer nach Einfuhrwert
China 426,6 Mio. €
Türkei 74,6 Mio. €
Schweiz 53,5 Mio. €
Norwegen 42,6 Mio. €
Vereinigtes Königreich 27,9 Mio. €
Werte für den KN8-Code 74122000. Quelle: Eurostat, Comext, CC BY 4.0, aufbereitet von hscode.info. Vertraulicher Handel ist keinen Codes zugeordnet.
Einfuhrzoll im Vereinigten Königreich für 741220
- 0%
Drittlandszollsätze aller britischen Warencodes unter dieser HS-Unterposition. Quelle: UK Department for Business and Trade, Stand 02.11.2026. Der britische Tarif weicht vom EU-Tarif ab.
Einfuhrumsatzsteuer in der EU
- Belgien 21 %
- Bulgarien 20 %
- Dänemark 25 %
- Deutschland 19 %
- Estland 24 %
- Finnland 25,5 %
- Frankreich 20 %
- Griechenland 24 %
- Irland 23 %
- Italien 22 %
- Kroatien 25 %
- Lettland 21 %
- Litauen 21 %
- Luxemburg 17 %
- Malta 18 %
- Niederlande 21 %
- Österreich 20 %
- Polen 23 %
- Portugal 23 %
- Rumänien 21 %
- Schweden 25 %
- Slowakei 23 %
- Slowenien 22 %
- Spanien 21 %
- Tschechien 21 %
- Ungarn 27 %
- Zypern 19 %
Normalsatz je Mitgliedstaat auf Zollwert, Zoll und Transportkosten bis zum Bestimmungsort. Ermäßigte Sätze hängen oft von Verwendung oder Abnehmer ab und gelten nur, wenn das Land sie für die Ware vorsieht. Quelle: Europäische Kommission, Taxes in Europe Database, Stand 02.11.2026.
Ursprungsregeln
Die Präferenzursprungsregeln für die Unterposition 741220 hängen vom Handelsabkommen ab. Die Kommission veröffentlicht sie in Access2Markets.
Ursprungsregeln bei Access2MarketsInformationen
Wenn Sie "aus Kupferlegierungen" importieren oder exportieren, ist es wichtig, den richtigen HS-Code oder TARIC-Code zu haben. Der HS-Code 7412200000 80 ist der Standardcode für dieses Produkt und stellt sicher, dass die richtigen Zölle und Abgaben bei einer Überquerung internationaler Grenzen angewendet werden.
Um sicherzustellen, dass Ihre Geschäftsabwicklung bei der Einfuhr oder Ausfuhr von "aus Kupferlegierungen" reibungslos verläuft, sollten Sie folgende Punkte beachten:
- Informieren Sie sich über die spezifischen Einfuhr- und Ausfuhrbestimmungen in den beteiligten Ländern. Dazu gehören mögliche Beschränkungen, Steuern und Zölle, die auf "aus Kupferlegierungen" anwendbar sind.
- Prüfen Sie, ob zusätzliche Lizenzen, Genehmigungen oder Zertifikate erforderlich sind, um "aus Kupferlegierungen" in das Zielland zu importieren oder aus dem Herkunftsland zu exportieren.
- Achten Sie darauf, dass Ihre Handelspartner über gültige Identifikationsnummern verfügen, wie zum Beispiel die EORI-Nummer (Economic Operators Registration and Identification) in der EU, um den Handel effizienter zu gestalten und Verzögerungen zu minimieren.
- Stellen Sie sicher, dass alle handels- und zollrelevanten Dokumente (wie Handelsrechnungen, Packlisten, Ursprungszertifikate und Versicherungspolicen) korrekt ausgefüllt sind und den jeweiligen nationalen Vorschriften entsprechen.
- Behalten Sie die aktuellen Wechselkurse sowie die Kosten für Verpackung, Versand und Versicherung im Blick, um eine genaue Kalkulation der Handelskosten durchzuführen.
Zusammenfassend lautet der HS-Code oder TARIC-Code für "aus Kupferlegierungen" 7412200000 80. Stellen Sie sicher, dass Sie diesen Code in all Ihren Handels- und Zolldokumenten korrekt verwenden, um eine reibungslose und problemlose Transaktion zu gewährleisten. Mit diesen Tipps sind Sie besser auf die Herausforderungen im internationalen Handel vorbereitet und können erfolgreich "aus Kupferlegierungen" importieren und exportieren.
HS-Code Struktur
1. HS Kapitel
Es gibt 21 unterschiedliche Abschnitte, die in 96 Kapitel unterteilt sind. Ausnahmekapitel beinhalten Kapitel 77, welches für zukünftige Nutzung reserviert ist, Kapitel 98 und 99, die auf nationaler Ebene begrenzt sind, und Kapitel 99, welches ein spezifischer Code für temporäre Änderungen ist. Im obigen Beispiel wurde Kapitel 74 ausgewählt, für kupfer und waren daraus
2. HS Position
Die Überschrift bestimmt die spezifische Kategorie innerhalb eines bestimmten Kapitels. Im obigen Beispiel bezieht sich die 12 auf Rohrformstücke, Rohrverschlussstücke und Rohrverbindungsstücke (z. B. Bogen, Muffen), aus Kupfer.
3. HS Unterposition
Die letzten beiden Ziffern des internationalen Harmonisierten Codes sind spezifischer und definieren Unterkategorien von Produkten. Im obigen Beispiel bezieht sich die 20 auf aus Kupferlegierungen.
HS-Code Baumstruktur
7400000000 80
HS Kapitel KUPFER UND WAREN DARAUS
7412000000 80
Rohrformstücke, Rohrverschlussstücke und Rohrverbindungsstücke (z. B. Bogen, Muffen), aus Kupfer
7412100000 80
- aus raffiniertem Kupfer
7412200000 80
- aus Kupferlegierungen