Import Handelsbeschränkungen für 7606000000 80
Diese Tabelle enthält Informationen zu den Handelsbeschränkungen für den Import von Waren in die EU und die EU in Drittländer. Die Tabelle enthält Informationen zu den Handelsbeschränkungen, die aufgrund von Zollunionen, Präferenzen, Tarifquoten, Zollunionen, Veterinärkontrollen, Drittländerzöllen und Nicht-Präferenz-Tarifquoten erhoben werden.
| Ursprungsland | Start | Zoll / Steuer | Rechtsgrundlage Maßnahmetyp | |
|---|---|---|---|---|
| United Kingdom GB | 01-01-2025 | 0 % | Präferenztarifquote 143 | |
1011 | ERGA OMNES 1011 | 01-01-2005 | 7.5 % | Drittländer-Zoll 103 |
| North Macedonia MK | 01-01-2009 | 0 % | Tarifpräferenz 142 | |
| Bosnia and Herzegovina BA | 01-01-2009 | 0 % | Tarifpräferenz 142 | |
2027 | GSP+ (incentive arrangement for sustainable development and good governance) 2027 | 01-01-2014 | 0 % | Tarifpräferenz 142 |
| Ecuador EC | 01-01-2017 | 0 % | Tarifpräferenz 142 | |
2020 | GSP - General arrangements 2020 | 01-01-2017 | 4 % | Tarifpräferenz 142 |
XS | Serbia XS | 01-02-2010 | 0 % | Tarifpräferenz 142 |
| Japan JP | 01-02-2020 | 0 % | Tarifpräferenz 142 | |
| Peru PE | 01-03-2013 | 0 % | Tarifpräferenz 142 | |
| Albania AL | 01-04-2009 | 0 % | Tarifpräferenz 142 | |
| Kosovo XK | 01-04-2016 | 0 % | Tarifpräferenz 142 | |
| Montenegro ME | 01-05-2010 | 0 % | Tarifpräferenz 142 | |
| New Zealand NZ | 01-05-2024 | 0 % | Tarifpräferenz 142 | |
2200 | Central America 2200 | 01-08-2013 | 0 % | Tarifpräferenz 142 |
| Colombia CO | 01-08-2013 | 0 % | Tarifpräferenz 142 | |
| North Korea (Democratic People’s Republic of Korea) KP | 01-09-2017 | Importverbot 277 | ||
1011 | ERGA OMNES 1011 | 01-11-2018 | 0 % | Lufttüchtigkeit Tarifsperre 119 |
| Ukraine UA | 06-06-2023 | 0 % | Tarifpräferenz 142 | |
| South Africa ZA | 10-10-2016 | 0 % | Tarifpräferenz 142 | |
| Armenia AM | 10-10-2026 – 11-10-2028 | 0 % | Tarifpräferenz 142 | |
| India IN | 20-01-2024 – 31-12-2026 | Einschränkung der Einreise in die freie Zirkulation 475 | ||
| China CN | 20-01-2024 – 31-12-2026 | Einschränkung der Einreise in die freie Zirkulation 475 | ||
| Belarus BY | 20-01-2024 – 31-12-2026 | Einschränkung der Einreise in die freie Zirkulation 475 | ||
| Canada CA | 21-09-2017 | 0 % | Tarifpräferenz 142 | |
| EU-Canada agreement: re-imported goods 1006 | 21-09-2017 | 0 % | Tarifpräferenz 142 | |
| Faroe Islands FO | 01-01-1997 | 0 % | Tarifpräferenz 142 | |
XL | Melilla XL | 01-01-1999 | 0 % | Zugangsakt0001/85 Tarifpräferenz 142 |
| Occupied palestinian Territory PS | 01-01-2001 | 0 % | Tarifpräferenz 142 | |
| San Marino SM | 01-01-2006 | 0 % | Zollunion-Zoll 106 | |
| Türkiye TR | 01-01-2006 | 0 % | Zollunion-Zoll 106 | |
| Andorra AD | 01-01-2006 | 0 % | Zollunion-Zoll 106 | |
| EU-Switzerland agreement: re-imported goods 1007 | 01-01-2007 | 0 % | Tarifpräferenz 142 | |
2005 | GSP-EBA (Special arrangement for the least-developed countries - Everything But Arms) 2005 | 01-01-2014 | 0 % | Tarifpräferenz 142 |
| Moldova, Republic of MD | 01-01-2016 | 0 % | Tarifpräferenz 142 | |
| United Kingdom GB | 01-01-2021 | 0 % | Tarifpräferenz 142 | |
2080 | OCTs (Overseas Countries and Territories) 2080 | 01-01-2021 | 0 % | Tarifpräferenz 142 |
| Singapore SG | 01-01-2027 | 0 % | Tarifpräferenz 142 | |
| Ghana GH | 01-01-2027 | 0 % | Tarifpräferenz 142 | |
| Chile CL | 01-02-2025 | 0 % | Tarifpräferenz 142 | |
| Tunisia TN | 01-03-1998 | 0 % | Tarifpräferenz 142 | |
| Morocco MA | 01-03-2000 | 0 % | Tarifpräferenz 142 | |
| Lebanon LB | 01-04-2006 | 0 % | Tarifpräferenz 142 | |
| Jordan JO | 01-05-2002 | 0 % | Tarifpräferenz 142 | |
| Egypt EG | 01-06-2004 | 0 % | Tarifpräferenz 142 | |
XC | Ceuta XC | 01-07-1991 | 0 % | Zugangsakt0001/85 Tarifpräferenz 142 |
2012 | EEA - European Economic Area 2012 | 01-07-2007 | 0 % | Tarifpräferenz 142 |
| Korea, Republic of (South Korea) KR | 01-07-2011 | 0 % | Tarifpräferenz 142 | |
| Mexico MX | 01-07-2016 | 0 % | Tarifpräferenz 142 | |
| Kenya KE | 01-07-2024 | 0 % | Tarifpräferenz 142 | |
| United States US | 01-07-2026 | 0 % | Tarifpräferenz 142 | |
| Syria SY | 01-08-1994 | 0 % | Tarifpräferenz 142 | |
| Algeria DZ | 01-09-2005 | 0 % | Tarifpräferenz 142 | |
| Georgia GE | 01-09-2014 | 0 % | Tarifpräferenz 142 | |
1011 | ERGA OMNES 1011 | 01-11-2026 | 2 EUR | Union handling fee 800 |
1011 | ERGA OMNES 1011 | 01-11-2026 | 3 EUR | Low-value consignment customs duty 107 |
| Ivory Coast CI | 02-12-2019 | 0 % | Tarifpräferenz 142 | |
2000 | Preferential origin in accordance with the Agreement in the form of an Exchange of Letters between the European Union and the Kingdom of Morocco on the amendment of Protocols 1 and 4 to the Euro-Mediterranean Agreement establishing an association between the European Communities and their Member States, of the one part, and the Kingdom of Morocco, of the other part. 2000 | 03-10-2025 | 0 % | Tarifpräferenz 142 |
| Cameroon CM | 04-08-2014 | 0 % | Tarifpräferenz 142 | |
1035 | SADC EPA 1035 | 10-10-2016 | 0 % | Tarifpräferenz 142 |
1034 | Eastern and Southern Africa States 1034 | 14-05-2012 | 0 % | Tarifpräferenz 142 |
| Ghana GH | 15-12-2016 – 31-12-2026 | 0 % | Tarifpräferenz 142 | |
| Israel IL | 16-05-2023 | 0 % | Tarifpräferenz 142 | |
| Solomon Islands SB | 17-05-2020 | 0 % | Tarifpräferenz 142 | |
| Switzerland CH | 20-12-1972 | 0 % | Tarifpräferenz 142 | |
| Papua New Guinea PG | 20-12-2009 | 0 % | Tarifpräferenz 142 | |
| Singapore SG | 21-11-2019 – 31-12-2026 | 0 % | Tarifpräferenz 142 | |
| Fiji FJ | 28-07-2014 | 0 % | Tarifpräferenz 142 | |
1033 | CARIFORUM 1033 | 29-12-2008 | 0 % | Tarifpräferenz 142 |
| Samoa WS | 31-12-2018 | 0 % | Tarifpräferenz 142 |
| Ursprungsland | Start | Zoll / Steuer | Rechtsgrundlage Maßnahmetyp | |
|---|---|---|---|---|
1008 | All third countries 1008 | 01-01-2026 – 31-12-2026 | Dokument nötig ohne Dokument verboten | Carbon Border Adjustment Mechanism - CBAM 775 |
| North Korea (Democratic People’s Republic of Korea) KP | 01-09-2017 | Dokument nötig ohne Dokument verboten | Importkontrolle 714 | |
| Russian Federation RU | 19-12-2023 – 31-12-2027 | Dokument nötig ohne Dokument verboten | Importkontrolle 762 | |
| Belarus BY | 25-02-2025 | Dokument nötig ohne Dokument verboten | Importkontrolle 760 | |
| Ukraine UA | 24-06-2026 | Dokument nötig ohne Dokument verboten | Importkontrolle 762 | |
| Ukraine UA | 24-06-2026 | Dokument nötig ohne Dokument verboten | Importkontrolle 760 |
Erklärung der Handelsbeschränkungen
Erga Omnes bedeutet "für alle".
Drittländer sind Länder, die nicht der EU angehören.
GSP bedeutet "Generalised System of Preferences".
GSP Plus bedeutet "Generalised System of Preferences Plus".
European Economic Area (EEA) bedeutet alle EU-Mitgliedstaaten und Island, Liechtenstein und Norwegen.
OCTs steht für "Overseas Countries and Territories". Es sind Länder und Gebiete, die nicht der EU angehören. Mehr Informationen
CARIFORUM ist eine regionale Wirtschaftsintegrationsorganisation, die 15 Mitgliedstaaten der Karibischen Gemeinschaft (CARICOM) und die Dominikanische Republik umfasst.
SADC EPA steht für "Southern African Development Community - Economic Partnership Agreement".
Zoll bedeutet "Zollabgaben".
Einfuhrkosten für 7606000000 schätzen
- Zollwert 1.000,00 €
- Zoll 7,5 % 75,00 €
- Einfuhrumsatzsteuer 19 % 204,25 €
- Summe 1.279,25 €
Kann unter Bedingungen niedriger sein:
- Airworthiness tariff suspension: 0 %
Dokumente und Kontrollen für China
Nur eine Schätzung. Der Zollwert ist der Preis einschließlich Transport und Versicherung bis zur EU-Grenze. Verbrauchsteuern, andere Gebühren und herstellerbezogene Antidumpingzölle sind nicht berücksichtigt. Präferenzsätze gelten nur mit gültigem Ursprungsnachweis. Länderzugehörigkeit und Ausnahmen: TARIC, Stand November 2026.
Ausfuhrmaßnahmen für 7606000000
Was gilt, wenn diese Waren die EU verlassen: Ausfuhrkontrollen, Dual-Use- und andere Genehmigungen, Verbote je Bestimmungsland und die besondere Maßeinheit der Ausfuhranmeldung.
| Bestimmungsland | Start | Zoll / Steuer | Rechtsgrundlage Maßnahmetyp | |
|---|---|---|---|---|
| North Korea (Democratic People’s Republic of Korea) KP | 28-02-2018 | Export prohibition 278 |
| Bestimmungsland | Start | Zoll / Steuer | Rechtsgrundlage Maßnahmetyp | |
|---|---|---|---|---|
| North Korea (Democratic People’s Republic of Korea) KP | 01-09-2017 | Dokument nötig ohne Dokument verboten | Export control 709 | |
| Iran, Islamic Republic of IR | 30-09-2025 | Dokument nötig ohne Dokument verboten | Export control 781 | |
| Belarus BY | 20-07-2025 | Dokument nötig ohne Dokument verboten | Export control 766 | |
| Ukraine UA | 25-02-2025 | Dokument nötig ohne Dokument verboten | Export control 709 | |
| Ukraine UA | 25-08-2022 | Dokument nötig ohne Dokument verboten | Export control 767 |
Geschichte
Zollsätze und Maßnahmen für diesen Code im Zeitverlauf (Jahresstände).
Präferenzursprungsregeln für 7606000000
Was eine Ware erfüllen muss, um als Ursprungsware eines Partnerlandes zu gelten und den Präferenzzoll zu erhalten, je Abkommen. Wortlaut der Abkommen auf Englisch.
Autonomous Trade Preferences (Western Balkans) · Kosovo
EU-Chile Association Agreement · Chile
EU-Algeria Association Agreement · Algerien
EEA/EFTA agreements (Switzerland, Norway, Liechtenstein, Faroe Islands) · Färöer, Liechtenstein, Norwegen, Schweiz
EU-Egypt Association Agreement · Ägypten
EU-Georgia DCFTA · Georgien
EU-Jordan Association Agreement · Jordanien
EU-Central America Association Agreement
EU-Morocco Association Agreement · Marokko
EU-Moldova DCFTA · Republik Moldau
Pan-Euro-Mediterranean (PEM) Convention · Ägypten, Albanien, Andorra, Bosnien und Herzegowina, Färöer, Island, Kosovo, Liechtenstein, Montenegro, Nordmazedonien, Norwegen, Palästina, Schweiz, Türkei
EU-Tunisia Association Agreement · Tunesien
EU-Ukraine DCFTA · Ukraine
Aluminium and articles thereof; except for: / or: Manufacture: from materials of any heading, except that of the product, and in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
Generalised Scheme of Preferences (GSP, GSP+, EBA) · Armenien, Indien, Kenia, Pakistan, Salomonen, Samoa, Syrien, Vietnam
EU-Jordan Association Agreement (relaxed rules, 2016) · Jordanien
EU-Singapore FTA · Singapur
Aluminium and articles thereof; except for: / or: Manufacture from materials of any heading, except that of the product
EPA CARIFORUM
EPA Pacific · Fidschi, Papua-Neuguinea, Salomonen, Samoa
Aluminium and articles thereof; except for: / or: Manufacture in which: – all the materials used are classified within a heading other than that of the product; – the value of all the materials used does not exceed 50 % of the ex-works price of the product
EU-Canada CETA · Kanada
A change from any other heading.
EU-Colombia/Peru/Ecuador Trade Agreement · Ecuador, Kolumbien, Peru
Aluminium bars, rods and profiles, wire, plates and sheets / or: Manufacture: from materials of any heading, except that of the product, and in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product
EPA Eastern and Southern Africa
Unwrought aluminium / or: Manufacture in which: all the materials used are classified within a heading other than that of the product; and the value of all the materials used does not exceed 50 % of the ex-works price of the product / or: Manufacture by thermal or electrolytic treatment from unalloyed aluminium or waste and scrap of aluminium
EU Market Access Regulation (EPA) · Côte d’Ivoire, Ghana, Kamerun, Kenia
Aluminium and articles thereof; except for: / or: Manufacture in which: all the materials used are classified within a heading other than that of the product; the value of all the materials used does not exceed 50 % of the ex-works price of the product
EU-Iceland FTA · Island
Aluminium and articles thereof; except for: / or: Manufacture: – from materials of any heading, except that of the product, and – in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
EU-Japan EPA · Japan
CTH and MaxNOM 50 % (EXW); or CTH and RVC 55 % (FOB).
EU-Korea FTA · Südkorea
Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm / or: Manufacture: – from materials of any heading, except that of the product, and – in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
EU-Lebanon Association Agreement · Libanon
Aluminium and articles thereof; except for: / or: Manufacture: from materials of any heading, except that of the product, in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
EU-Mexico Global Agreement · Mexiko
Aluminium and articles thereof; except for: / or: Manufacture in which: all the materials used are classified within a heading other than that of the product, the value of all the materials used does not exceed 50 % of the ex-works price of the product
EU-Palestine Interim Association Agreement · Palästina
Aluminium and articles thereof; except for: / or: Manufacture in which: all the materials used are classified within a heading other than that of the product; the value of all the materials used does not exceed 50% of the ex-works price of the product
EPA SADC · Südafrika
Aluminium and articles thereof; except for: / or: Manufacture in which: all the materials used are classified within a heading other than that of the product; the value of all the materials used does not exceed 50 % of the ex–works price of the product
EU-Viet Nam FTA · Vietnam
Aluminium and articles thereof, except: / or: Manufacture from materials of any heading, except that of the product.
Quelle: Europäische Kommission, Access2Markets (CC BY 4.0, gekürzt). Maßgeblich ist der Text des Abkommens. Access2Markets
Anmerkungen und Erläuterungen zu 7606000000
Anmerkungen zu Kapitel 76
Unterpositions-Anmerkungen Zusätzliche Anmerkungen 1. Im Sinne der Unterpositionen 7601 10 10, 7601 20 30 und 7601 20 40 gelten als: — Barren: Waren in Rohform mit über die gesamte Länge gleich bleibendem Querschnitt in Form eines Rechtecks oder anderen Vielecks, mit einer Breite von mehr als 800 mm und einer Dicke von mehr als 280 mm, wobei die Länge immer die Breite und die Dicke überschreitet. Diese Waren sind zum Walzen bestimmt; — Bolzen: Waren in Rohform mit über die gesamte Länge gleich bleibendem Querschnitt in Form eines Kreises (einschließlich „abgeflachte Kreise“), mit einem Durchmesser von mehr als 125 mm. 2. Im Sinne der Unterpositionen 7606 12 11 und 7606 12 19 gelten als: — Bänder für Getränkedosenkörper: Bleche oder Bänder in Rollen, gewalzt, mit Mangan und Magnesium als Hauptlegierungselementen und mit einer Mindestzugfestigkeit von 262 MPa. Die Bleche oder Bänder haben über die gesamte Länge einen gleichbleibenden Querschnitt, eine Breite von 300 mm oder mehr, jedoch nicht mehr als 2 000 mm und eine Dicke von mehr als 0,2 mm, jedoch nicht mehr als 0,4 mm, wobei die Länge immer die Breite und die Dicke überschreitet. Die Bänder für Getränkedosenkörper sind vorgeschmiert und haben eine glänzende Oberfläche; — Bänder für Getränkedosendeckel und Getränkedosenlaschen: Bleche oder Bänder in Rollen, gewalzt, mit Magnesium als Hauptlegierungselement und mit einer Mindestzugfestigkeit von 345 MPa. Die Bleche oder Bänder haben über die gesamte Länge einen gleichbleibenden Querschnitt, eine Breite von 30 mm oder mehr, jedoch nicht mehr als 2 000 mm und eine Dicke von mehr als 0,2 mm, jedoch nicht mehr als 0,35 mm, wobei die Länge immer die Breite und die Dicke überschreitet. Die Bänder für Getränkedosendeckel sind auf beiden Seiten lackiert. Die Bänder für Getränkedosenlaschen sind entfettet und geölt. Diese Waren werden für die Herstellung von starren Getränkedosen, einschließlich der Getränkedosendeckel und Getränkedosenlaschen, verwendet. 3. Im Sinne der Unterpositionen 7606 11 30, 7606 12 30 und 7607 20 91 gelten als: — Aluminium-Verbundplatte: Laminierte Erzeugnisse aus zwei flachgewalzten Aluminiumblechen oder -folien, auch mit Legierung, jeweils mit einer Dicke von 0,08 mm oder mehr, jedoch nicht mehr als 0,55 mm, und einem durchgehenden Kern aus nichtporösen Polymer- oder Mineralstoffen, zusammengehalten durch einen Klebstoff, mit einer Gesamtdicke von 1,0 mm oder mehr, jedoch nicht mehr als 6,1 mm. Die beiden äußeren Deckbleche oder -folien können unterschiedliche Oberflächenbehandlungen aufweisen. Die Waren dürfen nicht gerollt sein.
Quellen: Kombinierte Nomenklatur 2026, Anhang I der Verordnung (EWG) Nr. 2658/87 (CELEX 32025R1926), und die Erläuterungen zur Kombinierten Nomenklatur (CELEX 02019XC0329(02)-20260213). Die Abschnitts- und Kapitelanmerkungen sind rechtsverbindlich, die Erläuterungen sind Auslegungshilfen. EUR-Lex
Britische verbindliche Zolltarifauskünfte zu 7606000000
Auskünfte von HM Revenue & Customs für Waren, deren britischer Warencode so beginnt wie dieser EU-Code. Der britische Zolltarif weicht vom EU-Tarif ab, für die EU sind sie daher nur eine Orientierung.
- UK 7606115089 Gültig vom 23.04.2024 bis 22.04.2027 · Auskunft 600010255 auf GOV.UK
Aluminium Composite Panels The materials composition is as follows: 3050 x 1500 x 3mm aluminium composite sheet comprising two 0.21 mm thick aluminium cover layers and a polyethylene or mineral core; the aluminium layer is coated in PE paint finish. The goods are used to make signs - flatbed printed direct on to aluminium panel sheets often referred to as 'Sandwich Panel' or 'Signboard'. Sheets come palletised.
Begründung
Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General Interpretative Rules (GIR)s Gir 1 has been used to classify this product by the terms of heading 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0.2 mm Gir 5 (b) has been used to identify the type of packaging. Gir 6 has been used to classify the goods to subheading level 760611 rectangular (including squares) of aluminium not alloyed Eight Digit Code 76061150 Painted varnished or coated with plastics Ten Digit Code 7606115089 other than else where specified Also classified in accordance with : Section XV Note 3 Harmonised System Explanatory Notes (HSENs) to Heading 7606 and subheading 7606.11
- UK 7606129386 Gültig vom 22.02.2024 bis 21.02.2027 · Auskunft 600009304 auf GOV.UK
Aluminium alloy sheets. Hot rolled from molten aluminium and 3mm thick. The sheets are flat, (not folded) not backed, without internal layers of other material and oblong in shape. The product will be used to form panels for balconies and will be later folded and cut to size as required but not exceeding a maximum width of 2000mm and a maximum length of 4000mm due to manufacturing limit. The product is palletised and wrapped for transport purposes.
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of Heading 7606 - Aluminium plates, sheets and strip, of a thickness exceeding 0.2 mm. GIR 5(b) has been used to identify the type of packaging - Packaged palletize and wrapped. GIR 6 has been used to classify this product to subheading level 760612 - Rectangular (including square); of aluminium alloys. 8 Digit Code 76061293 - Other than beverage can body stock, end stock and tab stock; other than aluminium composite panel; other of a thickness of, not less than 3 mm but less than 6 mm. 10 digit code 7606129386 - Other than plates bearing a specific …
- UK 7606129986 Gültig vom 23.02.2024 bis 22.02.2027 · Auskunft 600009305 auf GOV.UK
Aluminium alloy sheets. Hot rolled from molten aluminium and 6mm thick. The sheets are flat, (not folded) not backed, without internal layers of other material and oblong in shape. The product will be used to form panels for balconies and will be later folded and cut to size as required but not exceeding a maximum width of 2000mm and a maximum length of 4000mm due to manufacturing limit. The product is palletised and wrapped for transport purposes.
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of Heading 7606 - Aluminium plates, sheets and strip, of a thickness exceeding 0.2 mm. GIR 5(b) has been used to identify the type of packaging - Packaged palletize and wrapped. GIR 6 has been used to classify this product to subheading level 760612 - Rectangular (including square); of aluminium alloys. 8 Digit Code 76061299 - Other than beverage can body stock, end stock and tab stock; other than aluminium composite panel; other of a thickness of not less than 6 mm. 10 digit code 7606129986 - Other than plates bearing a specific manufacture number, for …
+ 2 weitere
- UK 7606129986 Gültig vom 10.02.2025 bis 09.02.2028 · Auskunft 600012087 auf GOV.UK
This product is a hot rolled, aluminium alloy plate. That is a flat rectangular shape (including square). Standard dimensions: Thicknesses of 6mm to 420mm, lengths up to 25000mm. The manufactured process plates minimum measurement can be 6mm thickness, width 600mm and length of 2000mm. All process plates will be cut to size to meet customer satisfaction requirements at a minimum of 50mm (W) x 50mm (L). The plates are to be used in sectors such as aerospace, defence, general engineering and commercial within the UK as well as outside the UK home market. The product is sometimes cold compressed as part of the stress relieving process. Material is packed down into wooden cases/supports and often wrapped with a hard board top and base in plastic covering for further protection from the elements.
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify the product to heading 7606 - Aluminium plates, sheets and strip, of a thickness exceeding 0.2 mm GIR 5b has been used to identify the type of packaging (Pallet) GIR 6 has been used to classify the goods to subheading level 760612 - Of aluminium alloys Eight digit code 76061299 - Not less than 6mm; Other than elsewhere specified within this heading Ten digit code 7606129986 - Other than; For use as body panels in the car industry and with a thickness of 6 mm or for use in the manufacture of aircraft parts Also classified in accordance with: Note 1b to Chapter 76 Note 3 to Section XV …
- UK 7606129988 Gültig vom 14.08.2024 bis 13.08.2027 · Auskunft 600010824 auf GOV.UK
This product is a hot rolled, aluminium alloy plate. Flat rectangular (including square) shape. Standard dimensions: Thickness of 6mm to 150mm. Width up to 1800mm. Length up to 5000mm. Maximum measures can reach: width 2200mm / length 10000mm. The plates are to be used typically for parts requiring a high level of mechanical properties and good resistance to stress-corrosion cracking, but usage is not limited to such applications. Material comes palletised.
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify the product to heading 7606 - Aluminium plates, sheets and strip, of a thickness exceeding 0.2 mm GIR 5b has been used to identify the type of packaging (Pallet) GIR 6 has been used to classify the goods to subheading level 760612 - Of aluminium alloys Eight digit code 76061299 - Not less than 6mm; Other than elsewhere specified within this heading Ten digit code 7606129988 - Other than elsewhere specified within this subheading Also classified in accordance with: Note 3 to Section XV Note 9(d) to Section XV Harmonised System Explanatory Notes (HSENs) to heading 7606
Quelle: HM Revenue & Customs, Advance Tariff Rulings. Enthält Informationen des öffentlichen Sektors unter der Open Government Licence v3.0.
Beschränkungen und Hinweise für 7606000000
- CBAM: CO2-Grenzausgleich Verordnung (EU) 2023/956, Anhang I 7606
Sektor: Aluminium
Rechtsakt auf EUR-Lex lesen - Russland-Sanktionen: Einfuhrverbot Verordnung (EU) Nr. 833/2014, Anhang XXI 7606
Art. 3i, Güter, die Russland erhebliche Einnahmen verschaffen
Rechtsakt auf EUR-Lex lesen
Nur zur Orientierung. Prüfen Sie den Rechtsakt, bevor Sie sich auf einen Hinweis verlassen; Schwellenwerte, Ausnahmen und Genehmigungen sind nicht vollständig abgebildet.
Einfuhrumsatzsteuer in der EU
- Belgien 21 %
- Bulgarien 20 %
- Dänemark 25 %
- Deutschland 19 %
- Estland 24 %
- Finnland 25,5 %
- Frankreich 20 %
- Griechenland 24 %
- Irland 23 %
- Italien 22 %
- Kroatien 25 %
- Lettland 21 %
- Litauen 21 %
- Luxemburg 17 %
- Malta 18 %
- Niederlande 21 %
- Österreich 20 %
- Polen 23 %
- Portugal 23 %
- Rumänien 21 %
- Schweden 25 %
- Slowakei 23 %
- Slowenien 22 %
- Spanien 21 %
- Tschechien 21 %
- Ungarn 27 %
- Zypern 19 %
Normalsatz je Mitgliedstaat auf Zollwert, Zoll und Transportkosten bis zum Bestimmungsort. Ermäßigte Sätze hängen oft von Verwendung oder Abnehmer ab und gelten nur, wenn das Land sie für die Ware vorsieht. Quelle: Europäische Kommission, Taxes in Europe Database, Stand 02.11.2026.
Ursprungsregeln
Die Präferenzursprungsregeln für die Unterposition 760600 hängen vom Handelsabkommen ab. Die Kommission veröffentlicht sie in Access2Markets.
Ursprungsregeln bei Access2MarketsInformationen
Wenn Sie "Bleche und Bänder, aus Aluminium, mit einer Dicke von mehr als 0,2 mm" importieren oder exportieren, ist es wichtig, den richtigen HS-Code oder TARIC-Code zu haben. Der HS-Code 7606000000 80 ist der Standardcode für dieses Produkt und stellt sicher, dass die richtigen Zölle und Abgaben bei einer Überquerung internationaler Grenzen angewendet werden.
Um sicherzustellen, dass Ihre Geschäftsabwicklung bei der Einfuhr oder Ausfuhr von "Bleche und Bänder, aus Aluminium, mit einer Dicke von mehr als 0,2 mm" reibungslos verläuft, sollten Sie folgende Punkte beachten:
- Informieren Sie sich über die spezifischen Einfuhr- und Ausfuhrbestimmungen in den beteiligten Ländern. Dazu gehören mögliche Beschränkungen, Steuern und Zölle, die auf "Bleche und Bänder, aus Aluminium, mit einer Dicke von mehr als 0,2 mm" anwendbar sind.
- Prüfen Sie, ob zusätzliche Lizenzen, Genehmigungen oder Zertifikate erforderlich sind, um "Bleche und Bänder, aus Aluminium, mit einer Dicke von mehr als 0,2 mm" in das Zielland zu importieren oder aus dem Herkunftsland zu exportieren.
- Achten Sie darauf, dass Ihre Handelspartner über gültige Identifikationsnummern verfügen, wie zum Beispiel die EORI-Nummer (Economic Operators Registration and Identification) in der EU, um den Handel effizienter zu gestalten und Verzögerungen zu minimieren.
- Stellen Sie sicher, dass alle handels- und zollrelevanten Dokumente (wie Handelsrechnungen, Packlisten, Ursprungszertifikate und Versicherungspolicen) korrekt ausgefüllt sind und den jeweiligen nationalen Vorschriften entsprechen.
- Behalten Sie die aktuellen Wechselkurse sowie die Kosten für Verpackung, Versand und Versicherung im Blick, um eine genaue Kalkulation der Handelskosten durchzuführen.
Zusammenfassend lautet der HS-Code oder TARIC-Code für "Bleche und Bänder, aus Aluminium, mit einer Dicke von mehr als 0,2 mm" 7606000000 80. Stellen Sie sicher, dass Sie diesen Code in all Ihren Handels- und Zolldokumenten korrekt verwenden, um eine reibungslose und problemlose Transaktion zu gewährleisten. Mit diesen Tipps sind Sie besser auf die Herausforderungen im internationalen Handel vorbereitet und können erfolgreich "Bleche und Bänder, aus Aluminium, mit einer Dicke von mehr als 0,2 mm" importieren und exportieren.
HS-Code Struktur
1. HS Kapitel
Es gibt 21 unterschiedliche Abschnitte, die in 96 Kapitel unterteilt sind. Ausnahmekapitel beinhalten Kapitel 77, welches für zukünftige Nutzung reserviert ist, Kapitel 98 und 99, die auf nationaler Ebene begrenzt sind, und Kapitel 99, welches ein spezifischer Code für temporäre Änderungen ist. Im obigen Beispiel wurde Kapitel 76 ausgewählt, für aluminium und waren daraus
2. HS Position
Die Überschrift bestimmt die spezifische Kategorie innerhalb eines bestimmten Kapitels. Im obigen Beispiel bezieht sich die 06 auf Bleche und Bänder, aus Aluminium, mit einer Dicke von mehr als 0,2 mm.
HS-Code Baumstruktur
7600000000 80
HS Kapitel ALUMINIUM UND WAREN DARAUS
7606000000 80
Bleche und Bänder, aus Aluminium, mit einer Dicke von mehr als 0,2 mm
7606110000 10
- quadratisch oder rechteckig
7606110000 80
- - aus nicht legiertem Aluminium
7606113000 80
- - - Aluminium-Verbundplatte
7606115000 10
- - - andere
7606115000 80
- - - - mit Farbe versehen, lackiert oder mit Kunststoff beschichtet
7606115025 10
- - - - - Bleche mit besonderer Fabrikationsnummer, für bestimmte Luftfahrzeuge
7606115025 80
- - - - - - ohne Unterlage, ohne innere Lagen aus anderem Material
7606115030 80
- - - - - - andere
7606115086 10
- - - - - andere
7606115086 80
- - - - - - ohne Unterlage, ohne innere Lagen aus anderem Material
7606115089 80
- - - - - - andere
7606119100 10
- - - - andere, mit einer Dicke von
7606119100 80
- - - - - weniger als 3 mm
7606119125 10
- - - - - - Bleche mit besonderer Fabrikationsnummer, für bestimmte Luftfahrzeuge
7606119125 80
- - - - - - - ohne Unterlage, ohne innere Lagen aus anderem Material
7606119130 80
- - - - - - - andere
7606119186 10
- - - - - - andere
7606119186 80
- - - - - - - ohne Unterlage, ohne innere Lagen aus anderem Material
7606119189 80
- - - - - - - andere
7606119300 80
- - - - - 3 mm oder mehr, jedoch weniger als 6 mm
7606119325 10
- - - - - - Bleche mit besonderer Fabrikationsnummer, für bestimmte Luftfahrzeuge
7606119325 80
- - - - - - - ohne Unterlage, ohne innere Lagen aus anderem Material
7606119330 80
- - - - - - - andere
7606119386 10
- - - - - - andere
7606119386 80
- - - - - - - ohne Unterlage, ohne innere Lagen aus anderem Material
7606119389 80
- - - - - - - andere
7606119900 80
- - - - - 6 mm oder mehr
7606119925 10
- - - - - - Bleche mit besonderer Fabrikationsnummer, für bestimmte Luftfahrzeuge
7606119925 80
- - - - - - - ohne Unterlage, ohne innere Lagen aus anderem Material
7606119930 80
- - - - - - - andere
7606119986 10
- - - - - - andere
7606119986 80
- - - - - - - ohne Unterlage, ohne innere Lagen aus anderem Material
7606119989 80
- - - - - - - andere
7606120000 80
- - aus Aluminiumlegierungen
7606121100 10
- - - Bänder für Getränkedosenkörper, Getränkedosendeckel und Getränkedosenlaschen
7606121100 80
- - - - Bänder für Getränkedosenkörper
7606121900 80
- - - - Bänder für Getränkedosendeckel und Getränkedosenlaschen
7606123000 80
- - - Aluminium-Verbundplatte
7606125000 10
- - - andere
7606125000 80
- - - - mit Farbe versehen, lackiert oder mit Kunststoff beschichtet
7606125023 10
- - - - - Bleche mit besonderer Fabrikationsnummer, für bestimmte Luftfahrzeuge
7606125023 20
- - - - - - ohne Unterlage, ohne innere Lagen aus anderem Material
7606125023 80
- - - - - - - mit einer Dicke von 0,8 mm oder mehr
7606125025 80
- - - - - - - andere
7606125030 80
- - - - - - andere
7606125085 10
- - - - - andere
7606125085 20
- - - - - - ohne Unterlage, ohne innere Lagen aus anderem Material
7606125085 80
- - - - - - - zur Verwendung als Karosserieteile in der Automobilindustrie und mit einer Dicke von 6 mm oder weniger oder zur Verwendung bei der Herstellung von Flugzeugteilen und mit einer Dicke von 0,8 mm oder mehr
7606125087 10
- - - - - - - andere
7606125087 80
- - - - - - - - warmgewalzte Rollen (Coils), spannungsfrei geglüht, mit einer Dicke von 1,5 mm oder weniger, mit einer Breite von 800 mm bis 2 050 mm, zur Verwendung beim Herstellen von Aluminiumverbundplatten
7606125088 80
- - - - - - - - andere
7606125089 80
- - - - - - andere
7606129200 10
- - - - andere, mit einer Dicke von
7606129200 80
- - - - - weniger als 3 mm
7606129223 10
- - - - - - Bleche mit besonderer Fabrikationsnummer, für bestimmte Luftfahrzeuge
7606129223 20
- - - - - - - ohne Unterlage, ohne innere Lagen aus anderem Material
7606129223 80
- - - - - - - - mit einer Dicke von 0,8 mm oder mehr
7606129225 80
- - - - - - - - in Rollen (Coils) oder als aufgerollte Bänder, als auf Länge zugeschnittene Bleche oder in runder Form
7606129227 80
- - - - - - - - andere
7606129230 80
- - - - - - - andere
7606129291 10
- - - - - - andere
7606129291 20
- - - - - - - ohne Unterlage, ohne innere Lagen aus anderem Material
7606129291 80
- - - - - - - - Zur Verwendung als Karosserieteile in der Automobilindustrie oder zur Verwendung bei der Herstellung von Flugzeugteilen und mit einer Dicke von 0,8 mm oder mehr
7606129292 10
- - - - - - - - andere
7606129292 80
- - - - - - - - - warmgewalzte Rollen (Coils), spannungsfrei geglüht, mit einer Dicke von 1,5 mm oder weniger, mit einer Breite von 800 mm bis 2 050 mm, zur Verwendung beim Herstellen von Aluminiumverbundplatten
7606129293 80
- - - - - - - - - in Rollen (Coils) oder als aufgerollte Bänder als auf Länge zugeschnittene Bleche oder in runder Form, mit einer Dicke von 0,2 mm oder mehr
7606129294 80
- - - - - - - - - andere
7606129297 80
- - - - - - - andere
7606129300 80
- - - - - 3 mm oder mehr, jedoch weniger als 6 mm
7606129310 80
- - - - - - Bleche mit besonderer Fabrikationsnummer, für bestimmte Luftfahrzeuge
7606129385 10
- - - - - - andere
7606129385 20
- - - - - - - ohne Unterlage, ohne innere Lagen aus anderem Material
7606129385 80
- - - - - - - - zur Verwendung als Karosserieteile in der Automobilindustrie oder zur Verwendung bei der Herstellung von Flugzeugteilen
7606129386 80
- - - - - - - - in Rollen (Coils) oder als aufgerollte Bänder, als auf Länge zugeschnittene Bleche oder in runder Form
7606129387 80
- - - - - - - - andere
7606129388 80
- - - - - - - andere
7606129900 80
- - - - - 6 mm oder mehr
7606129910 80
- - - - - - Bleche mit besonderer Fabrikationsnummer, für bestimmte Luftfahrzeuge
7606129921 10
- - - - - - Bleche aus Aluminium-Lithium-Legierungen
7606129921 20
- - - - - - - ohne Unterlage, ohne innere Lagen aus anderem Material
7606129921 80
- - - - - - - - zur Verwendung als Karosserieteile in der Automobilindustrie und mit einer Dicke von 6 mm oder zur Verwendung bei der Herstellung von Flugzeugteilen
7606129925 80
- - - - - - - - in Platten, mit einer Dicke von mehr als 6 mm
7606129929 80
- - - - - - - - andere
7606129930 80
- - - - - - - andere
7606129985 10
- - - - - - andere
7606129985 20
- - - - - - - ohne Unterlage, ohne innere Lagen aus anderem Material
7606129985 80
- - - - - - - - zur Verwendung als Karosserieteile in der Automobilindustrie und mit einer Dicke von 6 mm oder zur Verwendung bei der Herstellung von Flugzeugteilen
7606129986 80
- - - - - - - - in Platten, mit einer Dicke von mehr als 6 mm
7606129987 80
- - - - - - - - andere
7606129988 80
- - - - - - - andere
7606910000 10
- andere
7606910000 80
- - aus nicht legiertem Aluminium
7606910025 10
- - - Bleche mit besonderer Fabrikationsnummer, für bestimmte Luftfahrzeuge
7606910025 80
- - - - ohne Unterlage, ohne innere Lagen aus anderem Material, - in Rollen (Coils) oder als aufgerollte Bänder, als auf Länge zugeschnittene Bleche oder in runder Form, mit einer Dicke von 6 mm oder weniger; - in Platten, mit einer Dicke von mehr als 6 mm
7606910030 80
- - - - andere
7606910086 10
- - - andere
7606910086 80
- - - - ohne Unterlage, ohne innere Lagen aus anderem Material, - in Rollen (Coils) oder als aufgerollte Bänder, als auf Länge zugeschnittene Bleche oder in runder Form, mit einer Dicke von 6 mm oder weniger; - in Platten, mit einer Dicke von mehr als 6 mm
7606910088 80
- - - - andere
7606920000 80
- - aus Aluminiumlegierungen
7606920023 10
- - - Bleche mit besonderer Fabrikationsnummer, für bestimmte Luftfahrzeuge
7606920023 20
- - - - ohne Unterlage, ohne innere Lagen aus anderem Material, - in Rollen (Coils) oder als aufgerollte Bänder, als auf Länge zugeschnittene Bleche oder in runder Form, mit einer Dicke von 6 mm oder weniger; - in Platten, mit einer Dicke von mehr als 6 mm
7606920023 80
- - - - - mit einer Dicke von 0,8 mm oder mehr, zur Verwendung bei der Herstellung von Flugzeugteilen
7606920025 80
- - - - - andere
7606920030 80
- - - - andere
7606920085 10
- - - andere
7606920085 20
- - - - ohne Unterlage, ohne innere Lagen aus anderem Material, - in Rollen (Coils) oder als aufgerollte Bänder, als auf Länge zugeschnittene Bleche oder in runder Form, mit einer Dicke von 6 mm oder weniger; - in Platten, mit einer Dicke von mehr als 6 mm
7606920085 80
- - - - - zur Verwendung als Karosserieteile in der Automobilindustrie und mit einer Dicke von 6 mm oder weniger oder zur Verwendung bei der Herstellung von Flugzeugteilen und mit einer Dicke von 0,8 mm oder mehr
7606920091 10
- - - - - andere
7606920091 80
- - - - - - warmgewalzte Rollen (Coils), spannungsfrei geglüht, mit einer Dicke von 1,5 mm oder weniger, mit einer Breite von 800 mm bis 2 050 mm, zur Verwendung beim Herstellen von Aluminiumverbundplatten
7606920092 80
- - - - - - andere
7606920095 80
- - - - andere