Import Handelsbeschränkungen für 8431000000 80
Diese Tabelle enthält Informationen zu den Handelsbeschränkungen für den Import von Waren in die EU und die EU in Drittländer. Die Tabelle enthält Informationen zu den Handelsbeschränkungen, die aufgrund von Zollunionen, Präferenzen, Tarifquoten, Zollunionen, Veterinärkontrollen, Drittländerzöllen und Nicht-Präferenz-Tarifquoten erhoben werden.
| Ursprungsland | Start | Zoll / Steuer | Rechtsgrundlage Maßnahmetyp | |
|---|---|---|---|---|
2020 | GSP - General arrangements 2020 | 01-01-2023 | 0 % | Tarifpräferenz 142 |
1011 | ERGA OMNES 1011 | 01-11-2018 | 0 % | Lufttüchtigkeit Tarifsperre 119 |
1011 | ERGA OMNES 1011 | 01-11-2026 | 2 EUR | Union handling fee 800 |
1011 | ERGA OMNES 1011 | 01-11-2026 | 3 EUR | Low-value consignment customs duty 107 |
| Faroe Islands FO | 01-01-1997 | 0 % | Tarifpräferenz 142 | |
XL | Melilla XL | 01-01-1999 | 0 % | Zugangsakt0001/85 Tarifpräferenz 142 |
| Occupied palestinian Territory PS | 01-01-2001 | 0 % | Tarifpräferenz 142 | |
| Andorra AD | 01-01-2006 | 0 % | Zollunion-Zoll 106 | |
| San Marino SM | 01-01-2006 | 0 % | Zollunion-Zoll 106 | |
| Türkiye TR | 01-01-2006 | 0 % | Zollunion-Zoll 106 | |
| EU-Switzerland agreement: re-imported goods 1007 | 01-01-2007 | 0 % | Tarifpräferenz 142 | |
2027 | GSP+ (incentive arrangement for sustainable development and good governance) 2027 | 01-01-2014 | 0 % | Tarifpräferenz 142 |
2005 | GSP-EBA (Special arrangement for the least-developed countries - Everything But Arms) 2005 | 01-01-2014 | 0 % | Tarifpräferenz 142 |
| Moldova, Republic of MD | 01-01-2016 | 0 % | Tarifpräferenz 142 | |
| Ecuador EC | 01-01-2017 | 0 % | Tarifpräferenz 142 | |
| United Kingdom GB | 01-01-2021 | 0 % | Tarifpräferenz 142 | |
2080 | OCTs (Overseas Countries and Territories) 2080 | 01-01-2021 | 0 % | Tarifpräferenz 142 |
| Ghana GH | 01-01-2027 | 0 % | Tarifpräferenz 142 | |
| Chile CL | 01-02-2025 | 0 % | Tarifpräferenz 142 | |
| Tunisia TN | 01-03-1998 | 0 % | Tarifpräferenz 142 | |
| Morocco MA | 01-03-2000 | 0 % | Tarifpräferenz 142 | |
| Lebanon LB | 01-04-2006 | 0 % | Tarifpräferenz 142 | |
| Jordan JO | 01-05-2002 | 0 % | Tarifpräferenz 142 | |
| Egypt EG | 01-06-2004 | 0 % | Tarifpräferenz 142 | |
XC | Ceuta XC | 01-07-1991 | 0 % | Zugangsakt0001/85 Tarifpräferenz 142 |
2012 | EEA - European Economic Area 2012 | 01-07-2007 | 0 % | Tarifpräferenz 142 |
| Mexico MX | 01-07-2016 | 0 % | Tarifpräferenz 142 | |
| Kenya KE | 01-07-2024 | 0 % | Tarifpräferenz 142 | |
| United States US | 01-07-2026 | 0 % | Tarifpräferenz 142 | |
| Syria SY | 01-08-1994 | 0 % | Tarifpräferenz 142 | |
| Colombia CO | 01-08-2013 | 0 % | Tarifpräferenz 142 | |
| Viet Nam VN | 01-08-2020 | 0 % | Tarifpräferenz 142 | |
| Algeria DZ | 01-09-2005 | 0 % | Tarifpräferenz 142 | |
| Georgia GE | 01-09-2014 | 0 % | Tarifpräferenz 142 | |
| Ivory Coast CI | 02-12-2019 | 0 % | Tarifpräferenz 142 | |
2000 | Preferential origin in accordance with the Agreement in the form of an Exchange of Letters between the European Union and the Kingdom of Morocco on the amendment of Protocols 1 and 4 to the Euro-Mediterranean Agreement establishing an association between the European Communities and their Member States, of the one part, and the Kingdom of Morocco, of the other part. 2000 | 03-10-2025 | 0 % | Tarifpräferenz 142 |
| Cameroon CM | 04-08-2014 | 0 % | Tarifpräferenz 142 | |
1035 | SADC EPA 1035 | 10-10-2016 | 0 % | Tarifpräferenz 142 |
| South Africa ZA | 10-10-2016 | 0 % | Tarifpräferenz 142 | |
| Armenia AM | 10-10-2026 – 11-10-2028 | 0 % | Tarifpräferenz 142 | |
1034 | Eastern and Southern Africa States 1034 | 14-05-2012 | 0 % | Tarifpräferenz 142 |
| Ghana GH | 15-12-2016 – 31-12-2026 | 0 % | Tarifpräferenz 142 | |
| Israel IL | 16-05-2023 | 0 % | Tarifpräferenz 142 | |
| Solomon Islands SB | 17-05-2020 | 0 % | Tarifpräferenz 142 | |
| Switzerland CH | 20-12-1972 | 0 % | Tarifpräferenz 142 | |
| Papua New Guinea PG | 20-12-2009 | 0 % | Tarifpräferenz 142 | |
| North Korea (Democratic People’s Republic of Korea) KP | 28-02-2018 | Importverbot 277 | ||
| Fiji FJ | 28-07-2014 | 0 % | Tarifpräferenz 142 | |
1033 | CARIFORUM 1033 | 29-12-2008 | 0 % | Tarifpräferenz 142 |
| Samoa WS | 31-12-2018 | 0 % | Tarifpräferenz 142 |
| Ursprungsland | Start | Zoll / Steuer | Rechtsgrundlage Maßnahmetyp | |
|---|---|---|---|---|
| Russian Federation RU | 19-12-2023 – 31-12-2027 | Dokument nötig ohne Dokument verboten | Importkontrolle 762 | |
| Belarus BY | 25-02-2025 | Dokument nötig ohne Dokument verboten | Importkontrolle 760 | |
1011 | ERGA OMNES 1011 | 25-06-2025 | Dokument nötig ohne Dokument verboten | Import control of fluorinated greenhouse gases 724 |
| Ukraine UA | 24-06-2026 | Dokument nötig ohne Dokument verboten | Importkontrolle 762 | |
| Ukraine UA | 24-06-2026 | Dokument nötig ohne Dokument verboten | Importkontrolle 760 |
Erklärung der Handelsbeschränkungen
Erga Omnes bedeutet "für alle".
Drittländer sind Länder, die nicht der EU angehören.
GSP bedeutet "Generalised System of Preferences".
GSP Plus bedeutet "Generalised System of Preferences Plus".
European Economic Area (EEA) bedeutet alle EU-Mitgliedstaaten und Island, Liechtenstein und Norwegen.
OCTs steht für "Overseas Countries and Territories". Es sind Länder und Gebiete, die nicht der EU angehören. Mehr Informationen
CARIFORUM ist eine regionale Wirtschaftsintegrationsorganisation, die 15 Mitgliedstaaten der Karibischen Gemeinschaft (CARICOM) und die Dominikanische Republik umfasst.
SADC EPA steht für "Southern African Development Community - Economic Partnership Agreement".
Zoll bedeutet "Zollabgaben".
Einfuhrkosten für 8431000000 schätzen
- Zollwert 1.000,00 €
- Für dieses Ursprungsland ist kein Drittlandszoll erfasst.
- Einfuhrumsatzsteuer 19 % 190,00 €
- Summe 1.190,00 €
Kann unter Bedingungen niedriger sein:
- Airworthiness tariff suspension: 0 %
Dokumente und Kontrollen für China
Nur eine Schätzung. Der Zollwert ist der Preis einschließlich Transport und Versicherung bis zur EU-Grenze. Verbrauchsteuern, andere Gebühren und herstellerbezogene Antidumpingzölle sind nicht berücksichtigt. Präferenzsätze gelten nur mit gültigem Ursprungsnachweis. Länderzugehörigkeit und Ausnahmen: TARIC, Stand November 2026.
Ausfuhrmaßnahmen für 8431000000
Was gilt, wenn diese Waren die EU verlassen: Ausfuhrkontrollen, Dual-Use- und andere Genehmigungen, Verbote je Bestimmungsland und die besondere Maßeinheit der Ausfuhranmeldung.
| Bestimmungsland | Start | Zoll / Steuer | Rechtsgrundlage Maßnahmetyp | |
|---|---|---|---|---|
| North Korea (Democratic People’s Republic of Korea) KP | 28-02-2018 | Export prohibition 278 |
| Bestimmungsland | Start | Zoll / Steuer | Rechtsgrundlage Maßnahmetyp | |
|---|---|---|---|---|
| Belarus BY | 01-07-2024 | Dokument nötig ohne Dokument verboten | Export control 709 | |
1008 | All third countries 1008 | 12-03-2025 | Dokument nötig ohne Dokument verboten | Export control of fluorinated greenhouse gases 765 |
| Ukraine UA | 25-02-2025 | Dokument nötig ohne Dokument verboten | Export control 709 | |
| Ukraine UA | 25-08-2022 | Dokument nötig ohne Dokument verboten | Export control 767 | |
| Iran, Islamic Republic of IR | 30-09-2025 | Dokument nötig ohne Dokument verboten | Export control 768 |
Geschichte
Zollsätze und Maßnahmen für diesen Code im Zeitverlauf (Jahresstände).
Präferenzursprungsregeln für 8431000000
Was eine Ware erfüllen muss, um als Ursprungsware eines Partnerlandes zu gelten und den Präferenzzoll zu erhalten, je Abkommen. Wortlaut der Abkommen auf Englisch.
Autonomous Trade Preferences (Western Balkans) · Kosovo
EU-Chile Association Agreement · Chile
EU-Algeria Association Agreement · Algerien
EU-Egypt Association Agreement · Ägypten
EPA CARIFORUM
EU Market Access Regulation (EPA) · Côte d’Ivoire, Ghana, Kamerun, Kenia
EU-Jordan Association Agreement · Jordanien
EU-Lebanon Association Agreement · Libanon
EU-Morocco Association Agreement · Marokko
EU-Mexico Global Agreement · Mexiko
EU-Tunisia Association Agreement · Tunesien
Parts suitable for use solely or principally with road rollers / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
Generalised Scheme of Preferences (GSP, GSP+, EBA) · Armenien, Indien, Kenia, Pakistan, Salomonen, Samoa, Syrien, Vietnam
EU-Jordan Association Agreement (relaxed rules, 2016) · Jordanien
Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof; except for: / or: Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
EU-Canada CETA · Kanada
A change from any other heading; or A change from within this heading, whether or not there is also a change from any other heading, provided that the value of non-originating materials of this heading does not exceed 50 per cent of the transaction value or ex-works price of the product.
EU-Colombia/Peru/Ecuador Trade Agreement · Ecuador, Kolumbien, Peru
Parts suitable for use solely or principally with road rollers / or: Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product
Parts suitable for use solely or principally with the machinery of headings 8427 / or: Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product
EU-Japan EPA · Japan
CTH; MaxNOM 50 % (EXW); or RVC 55 % (FOB).
EU-Korea FTA · Südkorea
Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof; except for: / or: Manufacture from materials of any heading, except that of the product / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
EU-Palestine Interim Association Agreement · Palästina
Parts suitable for use solely or principally with road rollers / or: Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
EU-Singapore FTA · Singapur
Parts suitable for use solely or principally with the machinery of headings 8425 to 8430 / or: Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
EU-Viet Nam FTA · Vietnam
Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof; except for: / or: Manufacture from materials of any heading, except that of the product; or manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product.
Quelle: Europäische Kommission, Access2Markets (CC BY 4.0, gekürzt). Maßgeblich ist der Text des Abkommens. Access2Markets
Anmerkungen und Erläuterungen zu 8431000000
Anmerkungen zu Kapitel 84
Anmerkungen 1. Zu Kapitel 84 gehören nicht: a) Mühlsteine, Schleifsteine und andere Waren des Kapitels 68; b) Maschinen, Apparate und Geräte (z. B. Pumpen), aus keramischen Stoffen, und Teile aus keramischen Stoffen für Maschinen, Apparate und Geräte, aus Stoffen aller Art (Kapitel 69); c) Glaswaren für Laboratorien (Position 7017); Glaswaren zu technischen Zwecken (Position 7019 oder 7020); d) Waren der Position 7321 oder 7322 sowie ähnliche Waren aus anderen unedlen Metallen (Kapitel 74 bis 76 oder 78 bis 81); e) Staubsauger der Position 8508; f) elektromechanische Haushaltsgeräte der Position 8509; digitale Fotoapparate der Position 8525; g) Kühler für Waren des Abschnitts XVII; h) nicht motorbetriebene Handkehrgeräte (Position 9603). 2. Vorbehaltlich der Anmerkung 3 zu Abschnitt XVI und der Anmerkung 11 zu diesem Kapitel sind Maschinen, Apparate und Geräte, die sowohl in die Positionen 8401 bis 8424 oder die Position 8486 als auch in die Positionen 8425 bis 8480 eingereiht werden können, in die Positionen 8401 bis 8424 oder die Position 8486 einzureihen. A) Zu Position 8419 gehören jedoch nicht: a) Brutapparate und Aufzuchtapparate, für die Geflügelzucht, sowie Keimapparate (Position 8436); b) Getreidenetzapparate für die Müllerei (Position 8437); c) Diffuseure für die Zuckerherstellung (Position 8438); d) Maschinen und Apparate zum Warmbehandeln von Garnen, Geweben oder anderen Spinnstoffwaren (Position 8451); e) Apparate, Vorrichtungen oder Laborausstattung, die eine mechanische Arbeit verrichten, bei der eine Temperaturänderung zwar notwendig, aber nur von untergeordneter Bedeutung ist. B) Zu Position 8422 gehören jedoch nicht: a) Nähmaschinen zum Verschließen von Verpackungen (Position 8452); b) Büromaschinen und -apparate der Position 8472. C) Zu Position 8424 gehören jedoch nicht: a) Tintenstrahldruckmaschinen (Position 8443); b) Wasserstrahlschneidemaschinen (Position 8456). 3. Werkzeugmaschinen zum Abtragen von Stoffen aller Art, die sowohl in die Position 8456 als auch in die Position 8457, 8458, 8459, 8460, 8461, 8464 oder 8465 eingereiht werden können, sind der Position 8456 zuzuweisen. 4. Zu Position 8457 gehören nur metallbearbeitende Werkzeugmaschinen, ausgenommen Drehmaschinen (einschließlich Drehzentren), die mehrere verschiedenartige Bearbeitungsvorgänge ausführen können, und zwar entweder a) durch automatischen Werkzeugwechsel aus einem Werkzeugmagazin oder dergleichen entsprechend einem Bearbeitungsprogramm (Bearbeitungszentren) oder b) durch automatischen Einsatz verschiedener Bearbeitungseinheiten, die gleichzeitig oder nacheinander ein feststehendes Werkstück bearbeiten (Mehrwegemaschinen) oder c) durch automatisches Zuführen des Werkstücks zu verschiedenen Bearbeitungseinheiten (Transfermaschinen). 5. Im Sinne der Position 8462 ist eine „Längsteilanlage“ für Flacherzeugnisse eine Verarbeitungsanlage, die aus einem Abwickelgerät, einer Richtmaschine, einer Längsteilmaschine und einem Aufwickelgerät besteht. Eine „Ablänganlage“ für Flacherzeugnisse ist eine Verarbeitungsanlage, die aus einem Abwickelgerät, einer Richtmaschine und einer Trennschere besteht. 6. A) Als „automatische Datenverarbeitungsmaschinen“ im Sinne der Position 8471 gelten Maschinen, die 1) das Datenverarbeitungsprogramm oder die Datenverarbeitungsprogramme und mindestens die Daten speichern können, die zur Durchführung dieses Programms oder dieser Programme unmittelbar benötigt werden; 2) frei programmiert werden können entsprechend den Benutzeranforderungen; 3) Rechenoperationen entsprechend den Anweisungen des Benutzers durchzuführen vermögen, und 4) in der Lage sind, ohne menschliche Mitwirkung ein Datenerarbeitungsprogramm durchzuführen, dessen Ausführung sie während des Programmablaufs aufgrund logischer Entscheidung selbst ändern können. B) Automatische Datenverarbeitungsmaschinen können in Form von Systemen vorkommen, die aus einer unterschiedlichen Anzahl gesonderter Einheiten bestehen. C) Vorbehaltlich der Bestimmungen der nachstehenden Absätze D und E wird eine Einheit dann als Teil eines automatischen Datenverarbeitungssystems angesehen, wenn sie alle folgenden Bedingungen erfüllt: 1) sie ist von der ausschließlich oder hauptsächlich in einem automatischen Datenverarbeitungssystem verwendeten Art; 2) sie ist an die Zentraleinheit unmittelbar oder über eine oder mehrere andere Einheiten anschließbar, und 3) sie ist in der Lage, Daten in einer Form (Codes oder Signale) zu empfangen oder zu liefern, die vom System verwendbar sind. Gesondert gestellte Einheiten einer automatischen Datenverarbeitungsmaschine sind in die Position 8471 einzureihen. Tastaturen, X/Y-Koordinateneingabegeräte und Plattenspeichereinheiten, die die Bedingungen der vorstehenden Absätze C 2 und C 3 erfüllen, sind jedoch stets als Einheiten in die Position 8471 einzureihen. D) Die Position 8471 erfasst nicht die nachstehenden, gesondert gestellten Apparate, selbst wenn sie alle Bedingungen der Anmerkung 6 C erfüllen: 1) Drucker, Kopierer, Fernkopierer, auch kombiniert; 2) Sende- oder Empfangsgeräte für Töne, Bilder oder andere Daten, einschließlich Geräte für die Kommunikation in einem drahtgebundenen oder drahtlosen Netzwerk (wie ein lokales Netzwerk oder ein Weitverkehrsnetzwerk); 3) Lautsprecher und Mikrofone; 4) Fernsehkameras, digitale Fotoapparate und Videokameraaufnahmegeräte; 5) Monitore und Projektoren, ohne eingebautes Fernsehempfangsgerät. E) Maschinen, in die eine automatische Datenverarbeitungsmaschine eingebaut ist oder die mit einer automatischen Datenverarbeitungsmaschine zusammenarbeiten und die eine eigene Funktion (andere als die Datenverarbeitung) ausführen, sind in die ihrer Funktion entsprechende Position oder, falls keine solche vorhanden ist, in eine Sammelposition einzureihen. 7. Zu Position 8482 gehören nur solche polierten Stahlkugeln, deren Grenzabmaß nicht mehr als ± 1 v. H. vom angegebenen Durchmesser (Nennmaß), höchstens jedoch ± 0,05 mm beträgt. Stahlkugeln, die dieser Begriffsbestimmung nicht entsprechen, gehören zu Position 7326. 8. Maschinen mit vielseitiger Verwendungsmöglichkeit gehören, wenn nichts anderes bestimmt ist und vorbehaltlich der Anmerkung 2 zu Kapitel 84 und der Anmerkung 3 zu Abschnitt XVI, zu der Position, die ihrem Hauptverwendungszweck entspricht. Besteht eine derartige Position nicht oder ist der Hauptverwendungszweck nicht feststellbar, sind sie der Position 8479 zuzuweisen. Zu Position 8479 gehören jedoch stets Maschinen, die aus beliebigen Stoffen Bindfäden, Seile, Taue oder Kabel herstellen (z. B. Litzenschlagmaschinen, Seilschlagmaschinen und Kabelmaschinen). 9. Im Sinne der Position 8470 gilt der Begriff „im Taschenformat“ nur für Geräte, deren Abmessungen 170 mm × 100 mm × 45 mm nicht übersteigen. 10. Im Sinne der Position 8485 bezeichnet der Begriff „additive Fertigung“ (auch als 3D-Druck bezeichnet) den Aufbau physischer Gegenstände anhand eines digitalen Modells durch schichtweises Auftragen sowie Härtung und Verfestigung eines Werkstoffs (z. B. von Metall, Kunststoffen oder Keramik). Vorbehaltlich der Bestimmungen der Anmerkung 1 zu Abschnitt XVI und der Anmerkung 1 zu Kapitel 84 sind Maschinen, Apparate und Geräte, die dem Wortlaut der Position 8485 entsprechen, in Position 8485 und nicht in eine andere Position der Nomenklatur einzureihen. 11. A) Die Anmerkungen 12 a) und 12 b) zu Kapitel 85 gelten auch für die in dieser Anmerkung oder in der Position 8486 verwendeten Begriffe „Halbleiterbauelemente“ und „elektronische integrierte Schaltungen“. Im Sinne dieser Anmerkung und der Position 8486 umfasst der Begriff „Halbleiterbauelemente“ jedoch auch lichtempfindliche Halbleiterbauelemente und Leuchtdioden (LED). B) Im Sinne dieser Anmerkung und der Position 8486 umfasst der Begriff „Herstellen von Flachbildschirmen“ die Herstellung der Trägermaterialien, die in solchen Flachbildschirmen verwendet werden. Er umfasst nicht die Herstellung von Glas oder die Montage von gedruckten Schaltungen oder anderen elektronischen Komponenten auf einen Flachbildschirm. Der Begriff „Flachbildschirm“ umfasst nicht die Kathodenstrahlröhrentechnologie. C) Zur Position 8486 gehören auch Maschinen, Apparate und Geräte, von der Art, wie sie ausschließlich oder hautsächlich verwendet werden zum: 1) Herstellen oder zur Reparatur von Masken und Reticles; 2) Zusammenbauen von Halbleiterbauelementen oder elektronischen integrierten Schaltungen; 3) Heben, Fördern, Laden und Entladen von Halbleiterbarren (boules), Halbleiterscheiben (wafers) oder Halbleiterbauelementen, elektronischen integrierten Schaltungen und Flachbildschirmen. D) Vorbehaltlich der Bestimmungen der Anmerkung 1 zu Abschnitt XVI und der Anmerkung 1 zu Kapitel 84 sind Maschinen, Apparate und Geräte, die dem Wortlaut der Position 8486 entsprechen, in Position 8486 und nicht in eine andere Position der Nomenklatur einzureihen. Unterpositions-Anmerkungen 1. Im Sinne der Unterposition 8465 20 bezieht sich der Begriff „Bearbeitungszentren“ nur auf Werkzeugmaschinen für die Bearbeitung von Holz, Kork, Knochen, Hartkautschuk, Hartkunststoff oder ähnlichen harten Stoffen, welche verschiedenartige Bearbeitungen durch automatischen Werkzeugwechsel aus einem Werkzeugmagazin oder dergleichen entsprechend einem Bearbeitungsprogramm ermöglichen. 2. Im Sinne der Unterposition 8471 49 umfasst der Begriff „System“ automatische Datenverarbeitungsmaschinen, deren Einheiten die Bedingungen der Anmerkung 6 C zu Kapitel 84 erfüllen und die mindestens aus einer Zentraleinheit, einer Eingabeeinheit (z. B. einer Tastatur oder einem Scanner) und einer Ausgabeeinheit (z. B. einem Bildschirm oder einem Drucker) bestehen. 3. Im Sinne der Unterposition 8481 20 bezieht sich der Begriff „Ventile für ölhydraulische oder pneumatische Energieübertragung“ auf Ventile, die speziell in der „Fluidtechnik“ bei der Übertragung in einem hydraulischen oder pneumatischen System verwendet werden, bei dem Energie in Form von unter Druck stehenden Medien (Flüssigkeit oder Gas) übertragen wird. Diese Ventile können von jeder Bauart sein (zum Beispiel Druckminderventile, Rückschlagventile). Unterposition 8481 20 hat gegenüber allen anderen Unterpositionen der Position 8481 Vorrang. 4. Zu Unterposition 8482 40 gehören nur Wälzlager mit zylindrischen Rollen, deren gleichbleibender Durchmesser 5 mm oder weniger und deren Länge mindestens das Dreifache des Durchmessers beträgt. Die Rollen können an den Enden abgerundet sein. Zusätzliche Anmerkungen 1. Als „Motoren für Luftfahrzeuge“ der Unterpositionen 8407 10 und 8409 10 gelten nur Motoren, die ihrer Beschaffenheit nach zum Anbringen einer Luftschraube oder eines Rotors bestimmt sind. 2. Zu Unterposition 8471 70 30 gehören auch CD-ROM-Leser, die Speichereinheiten von automatischen Datenverarbeitungsmaschinen sind und aus Laufwerken bestehen, die ihrer Beschaffenheit nach zum Lesen von CD-ROM-, CD-Audio- und CD-Foto-Signalen bestimmt und mit einem Kopfhöreranschluss, einem Lautstärkeregler oder einem Ein-Aus-Schalter ausgestattet sind.
Anmerkungen zu Abschnitt XVI
MASCHINEN, APPARATE, MECHANISCHE GERÄTE UND ELEKTROTECHNISCHE WAREN, TEILE DAVON; TONAUFNAHME- ODER TONWIEDERGABEGERÄTE, FERNSEH-BILD- UND -TONAUFZEICHNUNGSGERÄTE ODER FERNSEH-BILD- UND -TONWIEDERGABEGERÄTE, TEILE UND ZUBEHÖR FÜR DIESE GERÄTE Anmerkungen 1. Zu Abschnitt XVI gehören nicht: a) Förderbänder oder Treibriemen, aus Kunststoffen des Kapitels 39 oder aus vulkanisiertem Kautschuk (Position 4010) oder andere Waren von der Art wie sie in Maschinen, Apparaten, mechanischen Geräten oder elektrotechnischen Waren verwendet werden oder zu anderen technischen Zwecken aus Weichkautschuk (Position 4016); b) Waren zu technischen Zwecken aus Leder oder rekonstituiertem Leder (Position 4205) oder aus Pelzfellen (Position 4303); c) Spulen, Hülsen, Röhrchen und ähnliche Träger, aus Stoffen aller Art (z. B. Kapitel 39, 40, 44, 48 oder Abschnitt XV); d) Lochkarten für Jacquard- oder ähnliche Maschinen (z. B. Kapitel 39 oder 48 bzw. Abschnitt XV); e) Förderbänder und Treibriemen, aus Spinnstoffen (Position 5910), sowie Gegenstände des technischen Bedarfs aus Spinnstoffen (Position 5911); f) Edelsteine oder Schmucksteine (natürliche, synthetische oder rekonstituierte) der Positionen 7102 bis 7104 sowie Waren ganz aus diesen Steinen der Position 7116, ausgenommen bearbeitete, nicht montierte Saphire und Diamanten für Tonabnehmer-Abtastnadeln (Position 8522); g) Teile mit allgemeiner Verwendungsmöglichkeit im Sinne der Anmerkung 2 zu Abschnitt XV, aus unedlen Metallen (Abschnitt XV), und gleichartige Waren aus Kunststoffen (Kapitel 39); h) Bohrgestänge (Position 7304); ij) endlose Gewebe und Bänder, aus Metalldraht oder -streifen (Abschnitt XV); k) Waren des Kapitels 82 oder 83; l) Waren des Abschnitts XVII; m) Waren des Kapitels 90; n) Uhrmacherwaren (Kapitel 91); o) auswechselbare Werkzeuge der Position 8207 und Bürsten von der als Maschinenteile verwendeten Art (Position 9603) sowie ähnliche, nach Stoffbeschaffenheit ihres arbeitenden Teils einzureihende auswechselbare Werkzeuge (z. B. Kapitel 40, 42, 43, 45 oder 59 bzw. Position 6804 oder 6909); p) Waren des Kapitels 95; q) Bänder für Schreibmaschinen oder ähnliche Bänder, auch auf Spulen oder in Kassetten (Einreihung nach stofflicher Beschaffenheit oder in die Position 9612, wenn sie mit Tinte oder anders für Abdrucke präpariert sind), oder Ein-, Zwei-, Dreibeinstative und ähnliche Waren der Position 9620. 2. Teile von Maschinen (ausgenommen Teile von Waren der Position 8484, 8544, 8545, 8546 oder 8547), die nicht durch Anmerkung 1 zu Abschnitt XVI, Anmerkung 1 zu Kapitel 84 oder Anmerkung 1 zu Kapitel 85 von Abschnitt XVI ausgenommen werden, sind nach folgenden Regeln einzureihen: a) Teile, die sich als Waren einer Position des Kapitels 84 oder 85 (ausgenommen die Positionen 8409, 8431, 8448, 8466, 8473, 8487, 8503, 8522, 8529, 8538 und 8548) darstellen, sind dieser Position zuzuweisen, ohne Rücksicht darauf, für welche Maschine sie bestimmt sind; b) andere Teile sind, wenn sie erkennbar ausschließlich oder hauptsächlich für eine bestimmte Maschine oder für mehrere in der gleichen Position (auch in Position 8479 oder Position 8543) erfasste Maschinen bestimmt sind, der Position für diese Maschine oder Maschinen oder, soweit zutreffend, der Position 8409, 8431, 8448, 8466, 8473, 8503, 8522, 8529 oder 8538 zuzuweisen. Teile, die hauptsächlich sowohl für Waren der Position 8517 als auch für Waren der Positionen 8525 bis 8528 bestimmt sind, gehören jedoch zu Position8517, und Teile, die ausschließlich oder hauptsächlich für Waren der Position 8524 bestimmt sind, gehören zu Position 8529; c) alle übrigen Teile sind der Position 8409, 8431, 8448, 8466, 8473, 8503, 8522, 8529 oder 8538 oder, soweit diese nicht zutreffen, der Position 8487 oder 8548 zuzuweisen. 3. Soweit nichts anderes bestimmt ist, sind kombinierte Maschinen aus zwei oder mehr Maschinen verschiedener Art, die zusammen arbeiten sollen und ein Ganzes bilden, sowie Maschinen, die ihrer Beschaffenheit nach dazu bestimmt sind, zwei oder mehrere verschiedene, sich abwechselnde oder ergänzende Tätigkeiten (Funktionen) auszuführen, nach der das Ganze kennzeichnenden Haupttätigkeit (Hauptfunktion) einzureihen. 4. Besteht eine Maschine oder eine Kombination aus Maschinen aus entweder voneinander getrennten oder durch Leitungen, Übertragungsvorrichtungen, elektrischen Kabeln oder anderen Vorrichtungen miteinander verbundenen Einzelkomponenten, die gemeinsam eine genau bestimmte, in einer der Positionen des Kapitels 84 oder 85 erfasste Funktion ausüben, so ist das Ganze in die Position einzureihen, die diese Funktion erfasst. 5. Bei der Anwendung der Anmerkungen des Abschnitts XVI umfasst der Begriff „Maschinen“ alle Maschinen, Apparate, Geräte und Vorrichtungen der in den Positionen des Kapitels 84 oder 85 genannten Art. 6. A) Als „Abfälle oder Schrott von elektrischen und elektronischen Geräten“ gelten in der Nomenklatur elektrische und elektronische Baugruppen, Leiterplatten und elektrische oder elektronische Waren, die: a) durch Bruch, Zerstörung oder andere Verfahren für ihren ursprünglichen Zweck unbrauchbar gemacht wurden oder aus wirtschaftlichen Gründen nicht mehr für eine Reparatur, Wiederaufarbeitung oder Wiederinstandsetzung, um sie wieder ihrem ursprünglichen Zweck zuzuführen, geeignet sind; und b) auf eine Weise verpackt oder versandt werden, die nicht dazu bestimmt ist, einzelne Waren vor einer Beschädigung beim Transport oder beim Be- oder Entladen zu schützen. B) Gemischte Sendungen von „Abfällen oder Schrott von elektrischen und elektronischen Geräten“ und anderen Abfällen und Schrott sind in die Position 8549 einzureihen. C) Dieser Abschnitt gilt nicht für Siedlungsabfälle im Sinne der Anmerkung 4 zu Kapitel 38. Zusätzliche Anmerkungen 1. Zur Montage oder zur Instandhaltung der Maschinen benötigte Werkzeuge sind wie die Maschinen einzureihen, zu denen sie gehören, wenn sie mit ihnen gestellt werden. Dies gilt auch für auswechselbare Werkzeuge, wenn sie mit den Maschinen, deren übliche Ausrüstung sie darstellen, gestellt und üblicherweise zusammen mit ihnen verkauft werden. 2. Auf Verlangen der Anmeldestelle/Zollstelle hat der Anmelder zur Ergänzung der Anmeldung/Zollanmeldung erläuternde Unterlagen (z. B. eine Warenbeschreibung, Prospekte, Katalogauszüge, Fotografien) beizufügen, aus denen die geläufige Bezeichnung der Maschine, ihre Verwendung und ihre wesentlichen Merkmale hervorgehen. Bei zerlegten oder nicht zusammengesetzten Maschinen hat der Anmelder auf Verlangen der Anmeldestelle/Zollstelle ferner einen Montageplan und ein Verzeichnis des Inhalts der einzelnen Packstücke als Beleg zur Anmeldung/Zollanmeldung vorzulegen. 3. Auf Antrag des Anmelders und bei Beachtung der von den zuständigen Behörden festzusetzenden Voraussetzungen werden die Bestimmungen der Allgemeinen Vorschrift 2 Buchstabe a) auch auf Maschinen angewendet, die in Teilsendungen ein- oder ausgehen.
Quellen: Kombinierte Nomenklatur 2026, Anhang I der Verordnung (EWG) Nr. 2658/87 (CELEX 32025R1926), und die Erläuterungen zur Kombinierten Nomenklatur (CELEX 02019XC0329(02)-20260213). Die Abschnitts- und Kapitelanmerkungen sind rechtsverbindlich, die Erläuterungen sind Auslegungshilfen. EUR-Lex
EU-Einreihungsverordnungen zu 8431000000
Verordnungen der Kommission, die bestimmte Waren in diesen Code eingereiht haben. Sie binden den Zoll in allen Mitgliedstaaten für gleiche Waren.
- 8431 49 20 15.04.2019 · Verordnung auf EUR-Lex
Kettengliedbaugruppe (sogenannte Gleiskette) aus Stahl, gegossen, bestehend aus Kettengliedern, die durch Verbinder miteinander verbunden sind. Die Glieder verfügen über gebohrte Löcher, mit deren Hilfe rechteckige Platten (sogenannte Kettenschuhe) befestigt werden, die bei der Gestellung nicht enthalten sind.
Die Ware ist aufgrund ihrer Konstruktion und insbesondere aufgrund des Vorhandenseins der gebohrten Löcher, an denen die Kettenschuhe befestigt werden, als Raupenkette erkennbar (die sowohl dem Antrieb als auch als Träger der Maschine dient, die sich auf ihr fortbewegt), die erkennbar ausschließlich oder hauptsächlich für die Verwendung mit Erdbewegungsmaschinen der Position 8429 bestimmt ist. Siehe Abbildung (*1).
Begründung
Einreihung gemäß den Allgemeinen Vorschriften 1 und 6 zur Auslegung der Kombinierten Nomenklatur, Anmerkung 1 f) zu Abschnitt XV, Anmerkung 2 b) zu Abschnitt XVI sowie nach dem Wortlaut der KN-Codes 8431 , 8431 49 und 8431 49 20 . Aufgrund ihrer objektiven Merkmale ist die Ware als ein Teil erkennbar, das ausschließlich oder hauptsächlich für die Verwendung mit Maschinen der Position 8429 bestimmt ist (siehe auch HS-Einreihungsavis zu Unterposition 8431.49 Nr. 1). Die Ware hat die objektiven Merkmale (Größe und Form) einer Raupenkette zur Verwendung mit Maschinen der Position 8429 . Eine Einreihung in die Position 7315 als Ketten aus Eisen oder Stahl ist daher ausgeschlossen. Die Ware ist somit in den KN-Code 8431 49 20 als „andere Teile, erkennbar ausschließlich oder hauptsächlich für Maschinen der Positionen 8425 bis 8430 bestimmt, aus Eisen oder Stahl, gegossen“ einzureihen.
- 8431 49 80 05.12.2016 · Verordnung auf EUR-Lex
Eine zylinderförmige Ware überwiegend aus Stahl (ausgenommen Gussstahl) mit einer Länge von etwa 35 cm und einem Durchmesser an der breitesten Stelle von etwa 19 cm (sogenannte „Laufrolle“). Sie setzt sich aus folgenden Hauptbestandteilen zusammen: einem zylindrischen Rollenkörper mit skaliertem Rollenkäfig für die Kettenführung; einer hochglanzpolierten Radialwelle mit Buchsenlager und beidseitigen Befestigungsstiften.
Die Ware ist zur Montage auf der Gleiskette eines Gleiskettenfahrzeuges bestimmt und wird dort in Verbindung mit ähnlichen Laufrollen für die Führung der Gleiskette in Längs- und Querrichtung verwendet. Siehe Abbildung (*1).
Begründung
Einreihung gemäß den Allgemeinen Vorschriften 1 und 6 für die Auslegung der Kombinierten Nomenklatur (KN), Anmerkung 2 b) zu Abschnitt XVI sowie nach dem Wortlaut der KN-Codes 8431 , 8431 49 und 8431 49 80 . Eine Einreihung in die Position 8708 als Teile oder Zubehör für Kraftfahrzeuge der Positionen 8701 bis 8705 ist ausgeschlossen, da die Ware nicht für die Verwendung in Kraftfahrzeugen dieser Positionen bestimmt ist. Die objektiven Merkmale der Ware (Größe und Form) entsprechen jenen einer Laufrolle, die für die Verwendung mit der Führungskette eines Gleiskettenfahrzeuges der Position 8429 bestimmt ist. Daher ist die Ware in den KN-Code 8431 49 80 als Teile, erkennbar ausschließlich oder hauptsächlich für Maschinen, Apparate und Geräte der Positionen 8425 bis 8430 bestimmt, ausgenommen Teile aus Gussstahl, einzureihen.
Britische verbindliche Zolltarifauskünfte zu 8431000000
Auskünfte von HM Revenue & Customs für Waren, deren britischer Warencode so beginnt wie dieser EU-Code. Der britische Zolltarif weicht vom EU-Tarif ab, für die EU sind sie daher nur eine Orientierung.
- UK 8431100000 Gültig vom 25.11.2024 bis 24.11.2027 · Auskunft 600011855 auf GOV.UK
A slip ring which is contained within a stainless-steel enclosure for open deck use, it is an electromechanical device that allows the transmission of power and electrical signals from a stationary to a rotating structure. It can improve mechanical performance, simplify system operation, and eliminate damage-prone wires dangling from movable joints. The Slip ring is specifically used with ROV systems (remotely operated vehicles) and are comprised of electrical power and signal passes, they are specifically fabricated for winches, and the winch cannot function without the slipring. They provide superior performance and reliability in demanding operational environments. It may be used for high voltage and high current applications, customized to meet customer specific needs. Integration with fibre optic rotary joints and fluid rotary unions to provide a complete rotating interface solution. The slip ring is waterproof rated to IP66, with the option for greater ingress protection. The slipring may be constructed for subsea use where underwater operation is required. The slip ring may be fluid-filled, and pressure compensated.
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 8431 - Parts suitable for use solely or principally with the machinery of headings 8425 to 8430 GIR 6 - Has been used to classify the goods to subheading level 8431 10 - Of machinery of 8425 Also classified in Accordance with :- Note 2 (b) to Section XVI Note (II) - Parts to Section XVI Harmonized System Explanatory Notes (HSENs) to Heading 8431
- UK 8431310000 Gültig vom 11.04.2024 bis 10.04.2027 · Auskunft 600010005 auf GOV.UK
This product is an aluminium rail for a stairlift. A chair or lifting platform is attached to the rail which allows the chair or lifting platform to move up and down the stairs.
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading 8431 Parts suitable for use solely or principally with the machinery of headings 8425 to 8430 GIR 6 - has been used to classify the goods to subheading level 843131 Of lifts, skip hoists or escalators Also classified in accordance with: Note 2b to Section XVI Harmonised System Explanatory Notes (HSENs) to heading 8431
- UK 8431310000 Gültig vom 19.09.2024 bis 18.09.2027 · Auskunft 600011434 auf GOV.UK
Tube-Top-Long Version LH is utilised in the manufacture of a retracting hinge section of a curved stairlift rail and made from 36.0 x 4mm BS6323/4 mild steel tubing that has been drilled, machined and welded to 100 x 30 x 6mm mild steel plate. The plate is used to ensure straightness/squareness of the tube. It prevents any distortion or misalignment, especially during transit. It is sacrificial and is discarded during the fabrication process. The drilled holes are the location holes for the hinge plate. The cut/incision allows for the hinge to retract when in use. Tube-Top-Long Version LH is part of the finished stairlift rail. Specifically, the hinge section of the rail. This section retracts when the Stairlift is not in use, ensuring minimal footprint of the rail product reducing any potential obstruction at the foot of the staircase. Crated in Cardboard Boxes.
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: Gir 1 - has been used to classify this product by the terms of heading 8431 Parts suitable for use solely or principally with the machinery of headings 8425 to 8430 Gir 5 (b) has been used to identify the type of packaging. Gir 6 - has been used to classify the goods to subheading level 843131 Of lifts, skip hoists or escalators Also classified in accordance with: Note 2b to Section XVI Harmonised System Explanatory Notes (HSENs) to heading 8428 (III) (M) and Parts Harmonised System Explanatory Notes (HSENs) to heading 8431
+ 21 weitere
- UK 8431310000 Gültig vom 07.04.2025 bis 06.04.2028 · Auskunft 600012754 auf GOV.UK
The product is a welded collar assembly for attaching a stairlift leg to the model 260 stairlift rail. It is made from cold finished seamless stainless steel. Metal is welded together to a mild steel bar to form a collar. The collar is fitted to the rail leg during fabrication of the stairlift rail. This component ensures the stairlift rail is secure upon the customers staircase and can be mounted appropriately. It subsequently goes onto be fabricated onto the stairlift rail and painted in an appropriate finish. Dimensions: 44.45 x 36.33
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 8431 Parts suitable for use solely or principally with the machinery of headings 8425 to 8430 GIR 6 has been used to classify the goods to sub-heading 8431.31 – Of lifts, skip hoists or escalators Also classified in accordance with :- Harmonised Standard Explanatory Notes (HSENs) to heading – 8131
- UK 8431310000 Gültig vom 07.05.2025 bis 06.05.2028 · Auskunft 600012910 auf GOV.UK
Sub assembly component which is utilised in the production of a hinge section of a stairlift curved rail. The component consists of a fabricated metal backplate and fittings and fixtures to accommodate further assembly of the backplate, including welded fabrications of strengthening plates and blocks. A number of holes are lasered into the backplate to facilitate further processing and assembly onto the Stairlift rail. It is manufactured in varying configurations and shaping to facilitate different rail angles depending on the configuration of staircase in the customer’s home.
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading 8431 - Parts suitable for use solely or principally with the machinery of headings 8425 to 8430 GIR 6 has been used to classify this product to subheading level 843131 - Of machinery of heading 8428; Of lifts, skip hoists or escalators Also classified in accordance with: Harmonized System Explanatory Notes (HSENs) to Heading 8431 and Note 2(b) to section XVI
- UK 8431310000 Gültig vom 09.05.2025 bis 08.05.2028 · Auskunft 600012912 auf GOV.UK
A Pivot Roller Wide This component is nylon hardened rubber roller, with a concave around its circumference to allow smooth movement of the Stairlift across the rail as it travel the staircase. The roller is affixed to the Stairlift Roller Assembly, and subsequently the carriage upon assembly.
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIRs): GIR 1 - has been used to classify this product by the terms of heading 8431 Parts suitable for use solely or principally with the machinery of headings 8425 to 8430 GIR 6 - has been used to classify the goods to subheading level 843131 Of lifts, skip hoists or escalators Also classified in accordance with: Note 2b to Section XVI Harmonised System Explanatory Notes (HSENs) to heading 8428 (III) (M) and Parts Harmonised System Explanatory Notes (HSENs) to heading 8431
- UK 8431310000 Gültig vom 09.05.2025 bis 08.05.2028 · Auskunft 600012913 auf GOV.UK
A pivot roller narrow This component is nylon hardened rubber roller, with a concave around its circumference to allow smooth movement of the Stairlift across the rail as it travel the staircase. The roller is affixed to the Stairlift Roller Assembly, and subsequently the carriage upon assembly.
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIRs): GIR 1 - has been used to classify this product by the terms of heading 8431 Parts suitable for use solely or principally with the machinery of headings 8425 to 8430 GIR 6 - has been used to classify the goods to subheading level 843131 Of lifts, skip hoists or escalators Also classified in accordance with: Note 2b to Section XVI Harmonised System Explanatory Notes (HSENs) to heading 8428 (III) (M) and Parts Harmonised System Explanatory Notes (HSENs) to heading 8431
- UK 8431310000 Gültig vom 09.05.2025 bis 08.05.2028 · Auskunft 600012914 auf GOV.UK
A Roller Assembly. The roller assembly is manufactured and machined from Mild steel metal. The component is machined, with two threads either side to allow assembly onto the Stairlift Carriage and the two hardened rubber rollers are screwed onto the assembly. The purpose of this component is to serve as the contact point between the stairlift carriage and the rail as it travels the staircase and protects the ride quality and ensures the stairlift remains steady and affixed to the rail it is mounted upon.
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIRs): GIR 1 - has been used to classify this product by the terms of heading 8431 Parts suitable for use solely or principally with the machinery of headings 8425 to 8430 GIR 6 - has been used to classify the goods to subheading level 843131 Of lifts, skip hoists or escalators Also classified in accordance with: Note 2b to Section XVI Harmonised System Explanatory Notes (HSENs) to heading 8428 (III) (M) and Parts Harmonised System Explanatory Notes (HSENs) to heading 8431
- UK 8431390090 Gültig vom 24.09.2025 bis 23.09.2028 · Auskunft 600013591 auf GOV.UK
The Carrier (formerly called Master Runner) is a cornerstone component in a curtains system. It has a steel body with 4 wheels and is used on UniTrack and UniBeam systems for the leading edge of curtains and it clamps the operating cord for corded and motorised systems. There is also a non-corded manual pull-along/walk-along option. For motorised systems, there is the option of including a limit striker; as the runner travels along the track, the limit striker makes contact with the limit switch which sends a command to the motor to stop. The Carrier has a safe working load of 50 kg. Two welded metal loops are placed 55 mm apart for attaching the leading edge of curtains. There are two variations of the Carrier for straight and curved track systems. These systems can be utilised in various spaces: theatres, media studios, schools, crematoriums or anywhere curtains are required. The Carrier is wrapped in recyclable plastic within a cardboard box with paper void fill; it is either sent individually or as part of the tracking system depending on customer needs. The greater system packaging is cardboard boxes, paper void fill, cardboard edging for the track and black wrap. Should the system be sent internationally, it will be sent in a wooden crate or on a pallet.
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIRs): GIR 1 has been used to classify this product by the terms of heading 8431 parts suitable for use solely or principally with the machinery of headings 8425 to 8430 GIR 5b has been used to identify the type of packaging GIR 6 has been used to classify the goods to subheading level 843139 of machinery of heading 8428 10-digit code 8431390090 other than elsewhere specified within the heading Also classified in accordance with: Harmonised System Explanatory Notes (HSENs) note 2 (c) to section XVI of chapter 84 Harmonised System Explanatory Notes (HSENs) note (II) parts (section note 2) (b) to section XVI of chapter 84 …
- UK 8431390090 Gültig vom 24.09.2025 bis 23.09.2028 · Auskunft 600013592 auf GOV.UK
The Scenery Carrier is a key component in a scenery system. It has a steel body with 4 wheels and is used on UniTrack and UniBeam systems to which you can directly attach scenic pieces or use our Scenery Attachment Clamp via a 13mm hole allowing a M12 fitting. It also clamps the operating cord for corded and motorised systems. For motorised systems, there is the option of including a limit striker; as the runner travels along the track, the limit striker makes contact with the limit switch which sends a command to the motor to stop. There is also a non-corded manual pull-along/walk-along option. In addition, there is an option to include the two welded loops 55mm apart as featured on the Carrier. The Scenery Carrier is wrapped in recyclable plastic within a cardboard box with paper void fill; it is either sent individually or as part of the tracking system depending on customer needs. Should the system be sent internationally, it will be sent in a wooden crate or on a pallet.
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIRs): GIR 1 has been used to classify this product by the terms of heading 8431 parts suitable for use solely or principally with the machinery of headings 8425 to 8430 GIR 5b has been used to identify the type of packaging GIR 6 has been used to classify the goods to subheading level 843139 of machinery of heading 8428 10-digit code 8431390090 other than elsewhere specified within the heading Also classified in accordance with: Harmonised System Explanatory Notes (HSENs) note 2 (c) to section XVI of chapter 84 Harmonised System Explanatory Notes (HSENs) note (II) parts (section note 2) (b) to section XVI of chapter 84 …
- UK 8431390090 Gültig vom 19.09.2025 bis 18.09.2028 · Auskunft 600013594 auf GOV.UK
Heavy duty scenery carrier -UniTrack & UniBeam The Heavy Duty Scenery Carrier has 12 ball raced unflanged wheels in a robust body. The carrier is designed to carry heavy items on both straight and curved track UniTrack and UniBeam systems and can be used in with another scenery carrier bottom. There is a 12.5 mm hole in the centre of the underside of the carrier that provides a connection point The scenery carriers are used to transport scenery, generally wooden- or metal- framed, or other scenic items such as LED walls from any position on a track to any other position on the track and this movement can happen to any number of positions any number of times. This movement is generally automated as part of a machine. The scenery carrier is attached to the machine by means of a chain drive or a rope drive. The positions are decided by the director and programmed ad-hoc on site. The weight is 2.267kg and is made from mild steel and polyurethane with a finish of black powder coated. The Scenery Carrier is wrapped in recyclable plastic within a cardboard box with paper void fill; it is either sent individually or as part of the tracking system depending on customer needs. Should the system be sent internationally, it will be sent in a wooden crate or on a pallet.
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIRs): GIR 1 has been used to classify this product by the terms of heading 8431 parts suitable for use solely or principally with the machinery of headings 8425 to 8430 GIR 5b has been used to identify the type of packaging GIR 6 has been used to classify the goods to subheading level 843139 of machinery of heading 8428 10-digit code 8431390090 other than elsewhere specified within the heading Also classified in accordance with: Harmonised System Explanatory Notes (HSENs) note 2 (c) to section XVI of chapter 84 Harmonised System Explanatory Notes (HSENs) note (II) parts (section note 2) (b) to section XVI of chapter 84 …
- UK 8431390090 Gültig vom 19.09.2025 bis 18.09.2028 · Auskunft 600013595 auf GOV.UK
Super heavy duty scenery carrier - Unibeam The scenery carriers are used to transport scenery, generally wooden- or metal- framed, or other scenic items such as LED walls from any position on a track to any other position on the track and this movement can happen to any number of positions any number of times. This movement is generally automated as part of a machine. The scenery carrier is attached to the machine by means of a chain drive or a rope drive. The positions are decided by the director and programmed ad-hoc on site. The Scenery Carrier has a robust steel 'U' shaped body with stiffening webs at each end. There are 8 ball raced unflanged wheels fitted to the carrier, the four main wheels which are polyurethane tyred, run between the top and bottom webs of the UniBeam track and the 4 side wheels keep the carrier lined up with the track centre. The carrier is designed to carry items on both straight and curved track systems in silence. The carrier can be used in conjunction with another scenery carrier bottom. The weight is 3.671 kg and is made from mild steel & polyurethane with a finish of black powder coated (metal work) The Scenery Carrier is wrapped in recyclable plastic within a cardboard box with paper void fill; it is either sent individually or as part of the tracking system depending on customer needs. Should the system be sent internationally, it will be sent in a wooden crate or on a pallet.
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIRs): GIR 1 has been used to classify this product by the terms of heading 8431 parts suitable for use solely or principally with the machinery of headings 8425 to 8430 GIR 5b has been used to identify the type of packaging GIR 6 has been used to classify the goods to subheading level 843139 of machinery of heading 8428 10-digit code 8431390090 other than elsewhere specified within the heading Also classified in accordance with: Harmonised System Explanatory Notes (HSENs) note 2 (c) to section XVI of chapter 84 Harmonised System Explanatory Notes (HSENs) note (II) parts (section note 2) (b) to section XVI of chapter 84 …
- UK 8431390090 Gültig vom 30.09.2025 bis 29.09.2028 · Auskunft 600013596 auf GOV.UK
A scenery attachment clamp The Scenery Attachment Clamp component is attached to the Scenery Carrier to accommodate set pieces of varying thickness from 6 mm to 44 mm to be rigged to UniBeam and UniTrack systems. The central pickup allows the carrier to pivot and there is movement to allow the COG to be adjusted. Scenery can lie flat on stage and be raised into the vertical position for ease of rigging. This component is part of the theatrical systems that can be utilised in various spaces: theatres, media studios, schools, etc. The scenery attachment clamp is wrapped in recyclable plastic within a cardboard box with paper void fill; it is either sent individually or as part of the tracking system depending on customer needs. Should the system be sent internationally, it will be sent in a wooden crate or on a pallet.
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIRs): GIR 1 has been used to classify this product by the terms of heading 8431 parts suitable for use solely or principally with the machinery of headings 8425 to 8430 GIR 5b has been used to identify the type of packaging GIR 6 has been used to classify the goods to subheading level 843139 of machinery of heading 8428 10-digit code 8431390090 other than elsewhere specified within the heading Also classified in accordance with: Harmonised System Explanatory Notes (HSENs) note 2 (c) to section XVI of chapter 84 Harmonised System Explanatory Notes (HSENs) note (II) parts (section note 2) (b) to section XVI of chapter 84 …
- UK 8431390090 Gültig vom 30.09.2025 bis 29.09.2028 · Auskunft 600013597 auf GOV.UK
The Erail carrier - curve cording is a U-shaped steel body with 12 ball raced wheels and is used on our Erail track for the leading edge of curtains and it clamps the operating cord for corded and motorised system. There is also a non-corded manual pull-along/walk-along option. For motorised systems, there is the option of including a limit striker; as the runner travels along the track, the limit striker makes contact with the limit switch which sends a command to the motor to stop. The Erail Carrier has a safe working load of 30 kg. Two welded metal loops are placed 64.7 mm apart for attaching the leading edge of curtains. This system can be utilised in various spaces: theatres, media studios, schools, crematoriums or anywhere curtains are required. The Erail carrier - curve cording is wrapped in recyclable plastic within a cardboard box with paper void fill; it is either sent individually or as part of the tracking system depending on customer needs. Should the system be sent internationally, it will be sent in a wooden crate or on a pallet.
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIRs): GIR 1 has been used to classify this product by the terms of heading 8431 parts suitable for use solely or principally with the machinery of headings 8425 to 8430 GIR 5b has been used to identify the type of packaging GIR 6 has been used to classify the goods to subheading level 843139 of machinery of heading 8428 10-digit code 8431390090 other than elsewhere specified within the heading Also classified in accordance with: Harmonised System Explanatory Notes (HSENs) note 2 (c) to section XVI of chapter 84 Harmonised System Explanatory Notes (HSENs) note (II) parts (section note 2) (b) to section XVI of chapter 84 …
- UK 8431390090 Gültig vom 30.09.2025 bis 29.09.2028 · Auskunft 600013598 auf GOV.UK
Erail 4 wheel carrier The Erail 4-Wheel Carrier (formerly called Erail 4-Wheel Master Runner) is a component in an Erail curtains system. It has a U-shaped steel body with 4 ball raced wheels and is used on our Erail track for manual/walkalong systems. It has a safe working load of 30 kg (15kg per loop.) Two swivel loops are placed 45 mm apart for attaching the leading edge of curtains. These systems can be utilised in various spaces: theatres, media studios, schools, crematoriums or anywhere curtains are required. The Erail 4-Wheel Carrier is wrapped in recyclable plastic within a cardboard box with paper void fill; it is either sent individually or as part of the tracking system depending on customer needs. Should the system be sent internationally, it will be sent in a wooden crate or on a pallet.
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIRs): GIR 1 has been used to classify this product by the terms of heading 8431 parts suitable for use solely or principally with the machinery of headings 8425 to 8430 GIR 5b has been used to identify the type of packaging GIR 6 has been used to classify the goods to subheading level 843139 of machinery of heading 8428 10-digit code 8431390090 other than elsewhere specified within the heading Also classified in accordance with: Harmonised System Explanatory Notes (HSENs) note 2 (c) to section XVI of chapter 84 Harmonised System Explanatory Notes (HSENs) note (II) parts (section note 2) (b) to section XVI of chapter 84 …
- UK 8431390090 Gültig vom 24.03.2026 bis 23.03.2029 · Auskunft 600014844 auf GOV.UK
UniTrack Joint Set The set includes an M8 bolt and four-square steel spigots. The spigots fit into the main track’s square tubes, and the bolt secures the sections through the vertical leg. These custom fittings are made in the UK. These are bespoke fittings for the theatrical system. Packaging options include cardboard boxes or recyclable plastic bags, shipped individually or as part of the tracking system. Larger shipments use cardboard, paper fill, edging, and black wrap; international deliveries may be sent in a wooden crate or on a pallet.
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIRs): GIR 1 has been used to classify this product by the terms of heading 8431 parts suitable for use solely or principally with the machinery of headings 8425 to 8430 GIR 5b has been used to identify the type of packaging GIR 6 has been used to classify the goods to subheading level 843139 of machinery of heading 8428 10-digit code 8431390090 other than elsewhere specified within the heading Also classified in accordance with: Harmonised System Explanatory Notes (HSENs) note 2 (c) to section XVI of chapter 84 Harmonised System Explanatory Notes (HSENs) note (II) parts (section note 2) (b) to section XVI of chapter 84 …
- UK 8431390090 Gültig vom 24.03.2026 bis 23.03.2029 · Auskunft 600014845 auf GOV.UK
UniBeam Joint Set The joint set consists of two zinc-plated steel clamp plates and is used to connect to sections of UniBeam to make the track longer The plates are inserted into the upper and lower channels of the UniBeam track. The four 10mm set crews (per plate) have a close fit into each channel of the track which secures the two sections together. These are bespoke fittings for the theatrical system. The UniBeam Joint Set is packaged within a cardboard box or recyclable plastic bag; it is either sent individually or as part of the tracking system depending on customer needs. The greater system packaging is cardboard boxes, paper void fill, cardboard edging for the track and black wrap. Should the system be sent internationally, it will be sent in a wooden crate or on a pallet
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIRs): GIR 1 has been used to classify this product by the terms of heading 8431 parts suitable for use solely or principally with the machinery of headings 8425 to 8430 GIR 5b has been used to identify the type of packaging GIR 6 has been used to classify the goods to subheading level 843139 of machinery of heading 8428 10-digit code 8431390090 other than elsewhere specified within the heading Also classified in accordance with: Harmonised System Explanatory Notes (HSENs) note 2 (c) to section XVI of chapter 84 Harmonised System Explanatory Notes (HSENs) note (II) parts (section note 2) (b) to section XVI of chapter 84 …
- UK 8431390090 Gültig vom 24.03.2026 bis 23.03.2029 · Auskunft 600014846 auf GOV.UK
The Erail Joint Set The joint set consists of two plates, four M6 csk screws and a pin is used to connect to sections of Erail to make the track longer. One of the plates fits inside the channel of the initial track and the other sits on top and they are secured together with four M6 csk screws; two screws in the initial track, two screws in the adjoining track. A pin is inserted into a keyhole slot at the bottom of the initial track which aligns the two tracks together. These are bespoke fittings for the theatrical system. This component part is manufactured in the UK. The Erail Joint Set is packaged within a cardboard box or recyclable plastic back; it is either sent individually or as part of the tracking system depending on customer needs. The greater system packaging is cardboard boxes, paper void fill, cardboard edging for the track and black wrap. Should the system be sent internationally, it will be sent in a wooden crate or on a pallet.
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIRs): GIR 1 has been used to classify this product by the terms of heading 8431 parts suitable for use solely or principally with the machinery of headings 8425 to 8430 GIR 5b has been used to identify the type of packaging GIR 6 has been used to classify the goods to subheading level 843139 of machinery of heading 8428 10-digit code 8431390090 other than elsewhere specified within the heading Also classified in accordance with: Harmonised System Explanatory Notes (HSENs) note 2 (c) to section XVI of chapter 84 Harmonised System Explanatory Notes (HSENs) note (II) parts (section note 2) (b) to section XVI of chapter 84 …
- UK 8431390090 Gültig vom 24.03.2026 bis 23.03.2029 · Auskunft 600014847 auf GOV.UK
The 2Way Joint Set is used to connect to sections of 2Way to make the track longer. The joint set consists of a 5mm thick plate, four grub screws and two roll pins. The plate slides into the top channel of the aluminium track and is secured into place with four M6 grub screws; two screws in the initial track, two screws in the adjoining track. The roll pins are inserted into two keyhole slots in the bottom left and right corners of the initial track to align it with the adjoining track. These are bespoke fittings for the theatrical system. This component part is manufactured in the UK. The 2Way Joint Set is packaged within a cardboard box or recyclable plastic bag; it is either sent individually or as part of the tracking system depending on customer needs. The greater system packaging is cardboard boxes, paper void fill, cardboard edging for the track and black wrap. Should the system be sent internationally, it will be sent in a wooden crate or on a pallet.
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIRs): GIR 1 has been used to classify this product by the terms of heading 8431 parts suitable for use solely or principally with the machinery of headings 8425 to 8430 GIR 5b has been used to identify the type of packaging GIR 6 has been used to classify the goods to subheading level 843139 of machinery of heading 8428 10-digit code 8431390090 other than elsewhere specified within the heading Also classified in accordance with: Harmonised System Explanatory Notes (HSENs) note 2 (c) to section XVI of chapter 84 Harmonised System Explanatory Notes (HSENs) note (II) parts (section note 2) (b) to section XVI of chapter 84 …
- UK 8431498090 Gültig vom 28.11.2024 bis 27.11.2027 · Auskunft 600011837 auf GOV.UK
The item is a guard railing which forms part of the external walkways of a cranes super structure. The item is a fabricated structure made from steel. It is not made of Cast Iron or Cast Steel. The item is welded to a larger walkway structure and is intended to provide safety for personnel accessing different areas of the crane externally. Item is received via trailer, packaged on pallets.
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) GIR 1 - has been used to classify this product by the terms of heading 8431 - Parts suitable for use solely or principally with the machinery of headings 8425 to 8430 GIR 6 - has been used to classify the goods to subheading level 843149 - Other than elsewhere specified in the heading 8 Digit Code 84314980 - other than of Cast Iron or Cast Steel 10 Digit Code 8431498090 - Other than certain types of steel shoes, with or without rubber pads attached thereto, whether or not assembled in a track chain, with a maximum length of 3000 mm, used on machines currently falling under headings 8426, 8429 or 8430, or conveyor belts currently falling under heading 8428 Also …
- UK 8431498090 Gültig vom 28.11.2024 bis 27.11.2027 · Auskunft 600011838 auf GOV.UK
A Spiral Staircase used to access the crane operators cab from the main control room. It is made from LH355-40 Steel, and is fabricated. It is shipped loose.
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) GIR 1 - has been used to classify this product by the terms of heading 8431 - Parts suitable for use solely or principally with the machinery of headings 8425 to 8430 GIR 6 - has been used to classify the goods to subheading level 843149 - Other than elsewhere specified in the heading 8 Digit Code 84314980 - other than of Cast Iron or Cast Steel 10 Digit Code 8431498090 - Other than certain types of steel shoes, with or without rubber pads attached thereto, whether or not assembled in a track chain, with a maximum length of 3000 mm, used on machines currently falling under headings 8426, 8429 or 8430, or conveyor belts currently falling under heading 8428 Also …
- UK 8431498090 Gültig vom 28.11.2024 bis 27.11.2027 · Auskunft 600011840 auf GOV.UK
Heavy Duty Axle specifically designed for vehicles that moves loads. The Axle is used in the manufacture of a harbour crane as part of the wheel set driven. It is made out of Steel and has moving parts.
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) GIR 1 - has been used to classify this product by the terms of heading 8431 - Parts suitable for use solely or principally with the machinery of headings 8425 to 8430 GIR 6 - has been used to classify the goods to subheading level 843149 - Other than elsewhere specified in the heading 8 Digit Code 84314980 - other than of Cast Iron or Cast Steel 10 Digit Code 8431498090 - Other than certain types of steel shoes, with or without rubber pads attached thereto, whether or not assembled in a track chain, with a maximum length of 3000 mm, used on machines currently falling under headings 8426, 8429 or 8430, or conveyor belts currently falling under heading 8428 Also …
- UK 8431498090 Gültig vom 28.11.2024 bis 27.11.2027 · Auskunft 600011925 auf GOV.UK
A pull rod used to provide balance and stability, providing a connection between the tower and the counterweight. Item is made of flat steel plate, steel bar and steel tube, welded together to form the structure.
Begründung
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIRs): GIR 1 has been used to classify this product by the terms of heading 8431 - Parts suitable for use solely or principally with the machinery of headings 8425 to 8430 GIR 6 has been used to classify the goods to subheading level 843149- Of machinery of heading 8426, 8429 or 8430; other than elsewhere specified 8-digit code 84314980 other than of cast iron or cast steel 10-digit code 8431498090 other than elsewhere specified within the heading Also classified in Accordance with: Note 2 (b) to Section XVI Harmonized System Explanatory Notes (HSENs) to Heading 8431
- UK 8431498090 Gültig vom 31.07.2026 bis 30.07.2029 · Auskunft 600015638 auf GOV.UK
The piston rod is a hard chrome-plated steel bar, precision cut to length, that attaches to the piston and extends from the cylinder through the rod-end head. The piston rod is used within various pieces of construction equipment such as bulldozer, excavators, etc.
Begründung
Classification has been determined in accordance with the following:- General Interpretative Rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 8431 - Parts suitable for use solely or principally with the machinery of headings 8425 to 8430 GIR 6 has been used to classify the goods to subheading level 843149 - Of machinery of heading 8426, 8429 or 8430; Other than elsewhere specified 8 Digit code 84314980 - Other than of cast iron or cast steel 10 Digit code 8431498090 - For other than elsewhere specified in this subheading Also classified in accordance with: Note 2 (b) to Section XVI. Harmonized System Explanatory Notes (HSEN’s) to 8431
Quelle: HM Revenue & Customs, Advance Tariff Rulings. Enthält Informationen des öffentlichen Sektors unter der Open Government Licence v3.0.
Beschränkungen und Hinweise für 8431000000
- Russland-Sanktionen: Einfuhrverbot Verordnung (EU) Nr. 833/2014, Anhang XXI 8431
Art. 3i, Güter, die Russland erhebliche Einnahmen verschaffen
Rechtsakt auf EUR-Lex lesen - Russland-Sanktionen: Ausfuhrverbot Verordnung (EU) Nr. 833/2014, Anhang XXIII 8431
Art. 3k, Güter, die zur Stärkung der industriellen Kapazitäten Russlands beitragen könnten
Rechtsakt auf EUR-Lex lesen
Nur zur Orientierung. Prüfen Sie den Rechtsakt, bevor Sie sich auf einen Hinweis verlassen; Schwellenwerte, Ausnahmen und Genehmigungen sind nicht vollständig abgebildet.
Einfuhrumsatzsteuer in der EU
- Belgien 21 %
- Bulgarien 20 %
- Dänemark 25 %
- Deutschland 19 %
- Estland 24 %
- Finnland 25,5 %
- Frankreich 20 %
- Griechenland 24 %
- Irland 23 %
- Italien 22 %
- Kroatien 25 %
- Lettland 21 %
- Litauen 21 %
- Luxemburg 17 %
- Malta 18 %
- Niederlande 21 %
- Österreich 20 %
- Polen 23 %
- Portugal 23 %
- Rumänien 21 %
- Schweden 25 %
- Slowakei 23 %
- Slowenien 22 %
- Spanien 21 %
- Tschechien 21 %
- Ungarn 27 %
- Zypern 19 % ggf. 3 %, 5 %
Normalsatz je Mitgliedstaat auf Zollwert, Zoll und Transportkosten bis zum Bestimmungsort. Ermäßigte Sätze hängen oft von Verwendung oder Abnehmer ab und gelten nur, wenn das Land sie für die Ware vorsieht. Quelle: Europäische Kommission, Taxes in Europe Database, Stand 02.11.2026.
Ursprungsregeln
Die Präferenzursprungsregeln für die Unterposition 843100 hängen vom Handelsabkommen ab. Die Kommission veröffentlicht sie in Access2Markets.
Ursprungsregeln bei Access2MarketsInformationen
Wenn Sie "Teile, erkennbar ausschließlich oder hauptsächlich für Maschinen, Apparate und Geräte der Positionen 8425 bis 8430 bestimmt" importieren oder exportieren, ist es wichtig, den richtigen HS-Code oder TARIC-Code zu haben. Der HS-Code 8431000000 80 ist der Standardcode für dieses Produkt und stellt sicher, dass die richtigen Zölle und Abgaben bei einer Überquerung internationaler Grenzen angewendet werden.
Um sicherzustellen, dass Ihre Geschäftsabwicklung bei der Einfuhr oder Ausfuhr von "Teile, erkennbar ausschließlich oder hauptsächlich für Maschinen, Apparate und Geräte der Positionen 8425 bis 8430 bestimmt" reibungslos verläuft, sollten Sie folgende Punkte beachten:
- Informieren Sie sich über die spezifischen Einfuhr- und Ausfuhrbestimmungen in den beteiligten Ländern. Dazu gehören mögliche Beschränkungen, Steuern und Zölle, die auf "Teile, erkennbar ausschließlich oder hauptsächlich für Maschinen, Apparate und Geräte der Positionen 8425 bis 8430 bestimmt" anwendbar sind.
- Prüfen Sie, ob zusätzliche Lizenzen, Genehmigungen oder Zertifikate erforderlich sind, um "Teile, erkennbar ausschließlich oder hauptsächlich für Maschinen, Apparate und Geräte der Positionen 8425 bis 8430 bestimmt" in das Zielland zu importieren oder aus dem Herkunftsland zu exportieren.
- Achten Sie darauf, dass Ihre Handelspartner über gültige Identifikationsnummern verfügen, wie zum Beispiel die EORI-Nummer (Economic Operators Registration and Identification) in der EU, um den Handel effizienter zu gestalten und Verzögerungen zu minimieren.
- Stellen Sie sicher, dass alle handels- und zollrelevanten Dokumente (wie Handelsrechnungen, Packlisten, Ursprungszertifikate und Versicherungspolicen) korrekt ausgefüllt sind und den jeweiligen nationalen Vorschriften entsprechen.
- Behalten Sie die aktuellen Wechselkurse sowie die Kosten für Verpackung, Versand und Versicherung im Blick, um eine genaue Kalkulation der Handelskosten durchzuführen.
Zusammenfassend lautet der HS-Code oder TARIC-Code für "Teile, erkennbar ausschließlich oder hauptsächlich für Maschinen, Apparate und Geräte der Positionen 8425 bis 8430 bestimmt" 8431000000 80. Stellen Sie sicher, dass Sie diesen Code in all Ihren Handels- und Zolldokumenten korrekt verwenden, um eine reibungslose und problemlose Transaktion zu gewährleisten. Mit diesen Tipps sind Sie besser auf die Herausforderungen im internationalen Handel vorbereitet und können erfolgreich "Teile, erkennbar ausschließlich oder hauptsächlich für Maschinen, Apparate und Geräte der Positionen 8425 bis 8430 bestimmt" importieren und exportieren.
HS-Code Struktur
1. HS Kapitel
Es gibt 21 unterschiedliche Abschnitte, die in 96 Kapitel unterteilt sind. Ausnahmekapitel beinhalten Kapitel 77, welches für zukünftige Nutzung reserviert ist, Kapitel 98 und 99, die auf nationaler Ebene begrenzt sind, und Kapitel 99, welches ein spezifischer Code für temporäre Änderungen ist. Im obigen Beispiel wurde Kapitel 84 ausgewählt, für kernreaktoren, kessel, maschinen, apparate und mechanische geräte; teile davon
2. HS Position
Die Überschrift bestimmt die spezifische Kategorie innerhalb eines bestimmten Kapitels. Im obigen Beispiel bezieht sich die 31 auf Teile, erkennbar ausschließlich oder hauptsächlich für Maschinen, Apparate und Geräte der Positionen 8425 bis 8430 bestimmt.
HS-Code Baumstruktur
8400000000 80
HS Kapitel KERNREAKTOREN, KESSEL, MASCHINEN, APPARATE UND MECHANISCHE GERÄTE; TEILE DAVON
8431000000 80
Teile, erkennbar ausschließlich oder hauptsächlich für Maschinen, Apparate und Geräte der Positionen 8425 bis 8430 bestimmt
8431100000 80
- von Maschinen, Apparaten und Geräten der Position 8425
8431200000 80
- von Maschinen, Apparaten und Geräten der Position 8427
8431200011 10
- - Chassis und Hydrauliken für manuelle Palettenhubwagen
8431200011 80
- - - versandt aus Thailand
8431200019 80
- - - andere
8431200040 80
- - Kühler mit Aluminiumkern und Kunststofftank sowie einer integrierten Trägerstruktur aus Stahl in offener Ausführung mit Rechteckwellendesign von neun Rippen pro 2,54 cm, zur Verwendung bei der Herstellung von Fahrzeugen der Position 8427
8431200050 80
- - Chassis und Hydraulik für manuelle Palettenhubwagen, mit einem sogenannten Gewichtsanzeigesystem, das aus einem nicht im Chassis, also nicht in den Gabeln eingebauten Wiegemechanismus besteht
8431200060 80
- - vormontierte oder montagefertige Bauteile von selbstfahrender Zugangstechnik, konstruiert zum Heben von Personen, ausgenommen einzelne, gesondert gestellte Komponenten
8431200070 80
- - Containerspreader zum Heben leerer 20- und 40-Fuß-Frachtcontainer -ohne integrierten Schlitten, -geeignet für Maschinen mit einer Tragfähigkeit von nicht mehr als 11 000 kg, -ausgelegt für das Heben von einem oder zwei Containern gleichzeitig, -mit Befestigung zur Aufnahme von Oben oder von der Seite , -mit Anti-Korrosionsbeschichtung, -mit einem Gewicht von 3 200 kg oder mehr, jedoch nicht mehr als 4 000 kg zur Verwendung bei der Herstellung von selbstfahrenden Containerumschlaggeräten
8431200080 80
- - andere
8431310000 10
- von Maschinen, Apparaten und Geräten der Position 8428
8431310000 80
- - von Personenaufzügen, Lastenaufzügen oder Rolltreppen
8431390000 80
- - andere
8431390010 80
- - - vormontierte oder montagefertige Bauteile von selbstfahrender Zugangstechnik, konstruiert zum Heben von Personen, ausgenommen einzelne, gesondert gestellte Komponenten
8431390015 10
- - - bestimmte Arten von Stahlplatten, auch mit daran befestigten Gummiauflagen, auch zu einer Laufkette zusammengesetzt, mit einer Länge von höchstens 3 000 mm für Förderbänder.
8431390015 20
- - - - Nicht zusammengesetzt
8431390015 80
- - - - - Kettenplatten aus Stahl mit einer Länge von mehr als 380 mm, einer Höhe von mehr als 140 mm und einem Gewicht von mehr als 118kg, ohne Kettenstege jeglicher Form mit einer Abmessung von 1 mm oder mehr
8431390022 80
- - - - - andere
8431390027 10
- - - - zusammengebaut
8431390027 80
- - - - - Kettenplatten aus Stahl mit einer Länge von mehr als 380 mm, einer Höhe von mehr als 140 mm und einem Gewicht von mehr als 118kg, ohne Kettenstege jeglicher Form mit einer Abmessung von 1 mm oder mehr
8431390039 80
- - - - - andere
8431390090 80
- - - andere
8431410000 10
- von Maschinen, Apparaten und Geräten der Position 8426, 8429 oder 8430
8431410000 80
- - Eimer, Kübel, Schaufeln, Löffel, Greifer und Zangen
8431410011 80
- - - Für neue Mobilkrane
8431410090 80
- - - andere
8431420000 80
- - Planierschilde für Planiermaschinen (Bulldozer oder Angledozer)
8431430000 80
- - Teile von Bohrmaschinen oder Tiefbohrgeräten der Unterposition 8430 41 oder 8430 49
8431430011 80
- - - Bestimmte vormontierte oder montagefertige Bauteile für neue Mobilkrane
8431430090 80
- - - andere
8431490000 80
- - andere
8431492000 80
- - - aus Eisen oder Stahl, gegossen
8431492005 10
- - - - bestimmte Arten von Stahlplatten, auch mit daran befestigten Gummiauflagen, auch zu einer Laufkette zusammengesetzt, mit einer Länge von höchstens 3 000 mm
8431492005 20
- - - - - nicht zusammengesetzt
8431492005 80
- - - - - - Kettenplatten aus Stahl mit einer Länge von mehr als 380 mm, einer Höhe von mehr als 140 mm und einem Gewicht von mehr als 118kg, ohne Kettenstege jeglicher Form mit einer Abmessung von 1 mm oder mehr
8431492010 80
- - - - - - andere
8431492020 10
- - - - - zusammengebaut
8431492020 80
- - - - - - Kettenplatten aus Stahl mit einer Länge von mehr als 380 mm, einer Höhe von mehr als 140 mm und einem Gewicht von mehr als 118kg, ohne Kettenstege jeglicher Form mit einer Abmessung von 1 mm oder mehr
8431492029 80
- - - - - - andere
8431492050 80
- - - - Bestimmte vormontierte oder montagefertige Bauteile für neue Mobilkrane
8431492090 80
- - - - andere
8431498000 80
- - - andere
8431498005 10
- - - - bestimmte Arten von Stahlplatten, auch mit daran befestigten Gummiauflagen, auch zu einer Laufkette zusammengesetzt, mit einer Länge von höchstens 3 000 mm
8431498005 20
- - - - - Nicht zusammengesetzt
8431498005 80
- - - - - - Kettenplatten aus Stahl mit einer Länge von mehr als 380 mm, einer Höhe von mehr als 140 mm und einem Gewicht von mehr als 118kg, ohne Kettenstege jeglicher Form mit einer Abmessung von 1 mm oder mehr
8431498010 80
- - - - - - andere
8431498020 10
- - - - - zusammengebaut
8431498020 80
- - - - - - Kettenplatten aus Stahl mit einer Länge von mehr als 380 mm, einer Höhe von mehr als 140 mm und einem Gewicht von mehr als 118kg, ohne Kettenstege jeglicher Form mit einer Abmessung von 1 mm oder mehr
8431498029 80
- - - - - - andere
8431498050 80
- - - - Bestimmte vormontierte oder montagefertige Bauteile für neue Mobilkrane
8431498090 80
- - - - andere