Numéro tarifaire 3811210037 80 - Additives containing: - a styrene-maleic anhydride copolymer esterified with C4-C20 alcohols, modified by aminopropylmorpholine, and - more than 50 % but not more than 75 % by weight of mineral oils, for use in the manufacture of lubricating oils

3811000000 80

Anti-knock preparations, oxidation inhibitors, gum inhibitors, viscosity improvers, anti-corrosive preparations and other prepared additives, for mineral oils (including gasoline) or for other liquids used for the same purposes as mineral oils

3811110000 10

- Anti-knock preparations

3811110000 80

- - Based on lead compounds

3811111000 80

- - - Based on tetraethyl-lead

3811119000 80

- - - Other

3811190000 80

- - Other

3811190010 80

- - - Solution of more than 61 % but not more than 63 % by weight of methylcyclopentadienyl manganese tricarbonyl in an aromatic hydrocarbon solvent, containing by weight not more than: - 4,9 % of 1,2,4-trimethyl-benzene, - 4,9 % of naphthalene, and - 0,5 % of 1,3,5-trimethyl-benzene

3811210000 80

- - Containing petroleum oils or oils obtained from bituminous minerals

3811210010 80

- - - Salts of dinonylnaphthalenesulphonic acid, in the form of a solution in mineral oils

3811210011 80

- - - Dispersing agent and oxidation inhibitor containing : - o-amino polyisobutylenephenol (CAS RN 78330-13-9), - more than 30 % by weight but not more than 50 % by weight of mineral oils, used in the manufacture of blends of additives for lubricating oils

3811210012 80

- - - Dispersing agent containing : - esters of polyisobutenyl succinic acid and pentaerythritol (CAS RN 103650-95-9), - 35 % or more but not more than 55 % by weight of mineral oils and - with a chlorine content of not more than 0,05 % by weight, used in the manufacture of blends of additives for lubricating oils

3811210013 80

- - - Additives containing : - borated magnesium (C16-C24) alkylbenzene sulphonates and - mineral oils, having a total base number (TBN) of more than 250, but not more than 350, for use in the manufacture of lubricating oils

3811210014 80

- - - Dispersing agent : - containing polyisobutene succinimide derived from reaction products of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 147880-09-9), - containing 35 % or more but not more than 55 % by weight of mineral oils, - with a chlorine content by weight of not more than 0,05 %, - having a total base number of less than 15, used in the manufacture of blends of additives for lubricating oils

3811210016 80

- - - Detergent containing : - Calcium salt of beta-aminocarbonyl alkylphenol (reaction product Mannich base of alkylphenol) - 40 % or more but not more than 60 % by weight of mineral oils and - having a total base number more than 120 used in the manufacture of blends of additives for lubricating oils

3811210018 80

- - - Detergent containing : - long chain alkyltoluene calcium sulphonates, - more than 30 % but not more than 50 % by weight of mineral oils, and - having a total base number of more than 310 but not more than 340, used in the manufacture of blends of additives for lubricating oils

3811210019 80

- - - Additives containing: - a polyisobutylene succinimide based mixture, and - more than 30 % but not more than 50 % by weight of mineral oils, having a total base number of more than 40, for use in the manufacture of lubricating oils

3811210020 80

- - - Additives for lubricating oils, based on complex organic molybdenum compounds, in the form of a solution in mineral oil

3811210022 80

- - - Additive consisting essentially of: -Polyisobutenyl succinic anhydride (CAS RN 192662-34-3) reaction product with N,N-diethylaminoethanol (CAS RN 100-37-8), -25 % or more by weight, but not more than 40 % by weight of mineral oil, used in the manufacture of blends of additives for lubricating oils

3811210024 80

- - - Additive consisting essentially of: -Polyisobutenyl succinic anhydride reaction product with polyethylenepolyamines, borated (CAS RN 134758-95-5), with a chlorine content by weight of 0,05 % or more but not more than 0,25 % and a total base number (TBN) of more than 20, -45 % and more by weight and no more than 55 % by weight of mineral oil, used in the manufacture of blends of additives for lubricating oils

3811210025 80

- - - Additives containing: - a (C8-18) alkyl polymethacrylate copolymer with N-[3-(dimethylamino)propyl]methacrylamide, of an average molecular weight (Mw) of more than 10,000 but not more than 20,000, and - more than 15 % , but not more than 30 % by weight of mineral oils, for use in the manufacture of lubricating oils

3811210026 80

- - - Additive consisting essentially of: -Phosphorodithioic acid, mixed O,O-bis (1,3-dimethylbutyl and isopropyl) esters, zinc salts (CAS RN 84605-29-8), -7 % or more by weight but not more than 12 % by weight of mineral oil, used in the manufacture of blends of additives for lubricating oils

3811210027 80

- - - Additives containing: -10 % or more by weight of an ethylene-propylene copolymer chemically modified by succinic anhydride groups reacted with 3-nitroaniline, and -mineral oils, for use in the manufacture of lubricating oils

3811210028 80

- - - Additive consisting essentially of: -Zinc bis(O,O-bis(2-ethylhexyl)) bis (dithiophosphate) (CAS RN 4259-15-8); -triphenyl phosphite (CAS RN 101-02-0) more than 0,5 % by weight but not more than 6 % by weight, -O,O,O-triphenyl phosphorothioate (CAS RN 597-82-0) more than 0,5 % by weight but not more than 6 % by weight, and not more than 7,5 % by weight of the combination of triphenylphosphorus compounds -10 % or more by weight but not more than 20 % by weight of mineral oils, used in the manufacture of blends of additives for lubricating oils

3811210030 80

- - - Additives for lubricating oils, containing mineral oils, consisting of calcium salts of reaction products of polyisobutylene substituted phenol with salicylic acid and formaldehyde, used as a concentrated additive for the manufacture of engine oils through a blending process

3811210031 80

- - - Additive consisting essentially of: -Phosphorodithioic acid, mixed O,O-bis (isobutyl and pentyl) esters, zinc salts (CAS RN 68457-79-4), -8 % or more by weight but not more than 15 % by weight of mineral oil, used in the manufacture of blends of additives for lubricating oils

3811210032 80

- - - Additive consisting essentially of: -Zinc O,O,O',O'-tetrakis (1,3-dimethylbutyl) bis(phosphorodithioate) (CAS RN 2215-35-2), -4 % or more by weight but not more than 12 % by weight of mineral oil, used in the manufacture of blends of additives for lubricating oils

3811210033 80

- - - Additives containing: - calcium salts of heptylphenol reaction products with formaldehyde (CAS RN 84605-23-2), and - mineral oils, having a total base number (TBN) of more than 40 but not more than 100, for use in the manufacture of lubricating oils or overbased detergents for use in lubricating oils

3811210048 80

- - - Additives containing - overbased magnesium (C20-C24) alkylbenzenesulphonates (CAS RN 231297-75-9) and - by weight more than 25 % but not more than 50 % of mineral oils, having a total base number of more than 350, but not more than 450, for use in the manufacture of lubricating oils

3811210050 80

- - - Additives for lubricating oils, - based on calcium C16-24 alkylbenzenesulphonates (CAS RN 70024-69-0), - containing mineral oils, used as a concentrated additive for the manufacture of engine oils through a blending process

3811210053 80

- - - Additives containing: - overbased calcium petroleum sulphonates (CAS 68783-96-0) with a sulphonate content by weight of 15 % or more, but not more than 30 % and - by weight more than 40 % but not more than 60 % of mineral oil, having a total base number of 280 or more but not more than 420,for use in the manufacture of lubricating oils

3811210055 80

- - - Additives containing: - low base number calcium polypropylbenzenesulphonate (CAS RN 75975-85-8) and - by weight more than 40 % but not more than 60 % mineral oils, having a total base number of more than 10 but not more than 25, for use in the manufacture of lubricating oils

3811210060 80

- - - Additives for lubricating oils, containing mineral oils, - based on calcium polypropylenyl substituted benzenesulphonate (CAS RN 75975-85-8) with a content by weight of 25 % or more but not more than 35 %, - with a total base number (TBN) of 280 or more but not more than 320, used as a concentrated additive for the manufacture of engine oils through a blending process

3811210063 80

- - - Additives containing: - an overbased mixture of calcium petroleum sulphonates (CAS RN 61789-86-4) and synthetic calcium alkylbenzenesulphonates (CAS RN 68584-23-6 and CAS RN 70024-69-0) with a total sulphonate content by weight of 15 % or more, but not more than 25 % and - by weight more than 40 % but not more than 60 % of mineral oils, having a total base number of 280 or more but not more than 320, for use in the manufacture of lubricating oils

3811210065 80

- - - Additives containing: - a polyisobutylene succinimide based mixture (CAS RN 160610-76-4), and - more than 35 % but not more than 50 % by weight of mineral oils, having a sulphur content of more than 0,7 % but not more than 1,3 % by weight, having a total base number of more than 8, for use in the manufacture of lubricating oils

3811210070 80

- - - Additives for lubricating oils, - containing polyisobutylene succinimide derived from reaction products of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 84605-20-9), - containing mineral oils, - with a chlorine content by weight of 0,05 % or more but not more than 0,25 %, - with a total base number (TBN) of more than 20, used as a concentrated additive for the manufacture of engine oils through a blending process

3811210073 80

- - - Additives containing: - borated succinimide compounds (CAS RN 134758-95-5), - mineral oils, and - having a total base number (TBN) greater than 40, for use in the manufacture of additive mixtures for lubricating oils

3811210075 80

- - - Additives containing: - Calcium (C10-C14) dialkylbenzenesulfonates, - more than 40 %, but not more than 60 % by weight of mineral oils, with a total base number of not more than 10, for use in the manufacture of blends of additives for lubricating oils

3811210077 80

- - - Antifoam additives consisting of: - a copolymer of 2-ethylhexyl acrylate and ethyl acrylate, and - more than 50 % but not more than 80 % by weight of mineral oils for use in the manufacture of additive blends for lubricating oils

3811210080 80

- - - Additives containing : - polyisobutylene aromatic polyamine succinimide, - more than 40 % but not more than 60 % by weight of mineral oils, with a nitrogen content of more than 0,6 % but not more than 0,9 % by weight, for use in the manufacture of additive blends for lubricating oils

3811210083 80

- - - Additives containing: - polyisobutene succinimide derived from reaction of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 84605-20-9), - containing more than 31,9 % but not more than 43,3 % by weight of mineral oils, - not more than 0,05 % by weight chlorine, and - having a total base number (TBN) greater than 20, for use in the manufacture of additives blends for lubricating oils

3811210085 80

- - - Additives, - containing more than 20 % but not more than 45 % by weight of mineral oils, - based on a mixture of branched dodecylphenol sulfide calcium salts, whether or not carbonated, for use in the manufacture of blends of additives

3811210090 80

- - - Other

3811290000 80

- - Other

3811290015 80

- - - Additive containing : - products from the reaction of branched heptyl phenol with formaldehyde, carbon disulphide and hydrazine (CAS RN 93925-00-9) and - by weight more than 15 % but not more than 28 % of light aromatic petroleum naphtha solvent, for use in the manufacture of lubricating oils

3811290018 80

- - - Additive consisting of dihydroxy butanedioic acid - (mixed C12-16-alkyl and C13-rich C11-14-isoalkyl) diester, for use in the manufacture of engine oils

3811290020 80

- - - Additives for lubricating oils, consisting of reaction products of bis(2-methylpentan-2-yl)dithiophosphoric acid with propylene oxide, phosphorus oxide, and amines with C12-14 alkyl chains, used as a concentrated additive for the manufacture of lubricating oils

3811290025 80

- - - Additives containing at least salts of primary amines and mono- and di-alkylphosphoric acids, for use in the manufacture of lubricating oils or greases

3811290030 80

- - - Additives for lubricating oils, consisting of reaction products of butyl-cyclohex-3-enecarboxylate, sulphur and triphenyl phosphite (CAS RN 93925-37-2), used as a concentrated additive for the manufacture of engine oils through a blending process

3811290035 80

- - - Additives consisting of an imidazoline based mixture (CAS RN 68784-17-8), for use in the manufacture of lubricating oils

3811290040 80

- - - Additives for lubricating oils, consisting of reaction products of 2-methyl-prop-1-ene with sulphur monochloride and sodium sulphide (CAS RN 68511-50-2), with a chlorine content by weight of 0,01 % or more but not more than 0,5 %, used as a concentrated additive for the manufacture of lubricating oils

3811290045 80

- - - Additives consisting of a mixture of (C7-C9) dialkyl adipates, in which diisooctyl adipate (CAS RN 1330-86-5) is more than 85 % by weight of the mixture, for use in the manufacture of lubricating oils

3811290050 80

- - - Additives for lubricating oils, consisting of a mixture of N,N-dialkyl -2-hydroxyacetamides with alkyl chain lengths between 12 and 18 carbon atoms (CAS RN 866259-61-2), used as a concentrated additive for the manufacture of engine oils through a blending process

3811290057 80

- - - Additives consisting of reaction products of diphenylamine and branched nonenes with: - more than 20 % but not more than 50 % by weight 4-monononyldiphenylamine, and - more than 50 % but not more than 80 % by weight 4,4'-dinonyldiphenylamine, - a total percentage of 2,4-dinonyldiphenylamine and 2,4'-dinonyldiphenylamine of not more than 15 % by weight, used for the manufacture of lubricating oils

3811290070 80

- - - Additives consisting of dialkylphosphites (in which the alkyl groups contain more than 80 % by weight of oleyl, palmityl and stearyl groups), for use in the manufacture of lubricating oils

3811290075 80

- - - Oxidation inhibitor mainly containing a mixture of isomers of 1-(tert-dodecylthio)propan-2-ol (CAS RN 67124-09-8), used in the manufacture of blends of additives for lubricating oils

3811290080 80

- - - Additives containing : - more than 70 % by weight of 2,5-bis(tert-nonyldithio)-[1,3,4]-thiadiazole (CAS RN 89347-09-1), and - more than 15 % by weight of 5-(tert-nonyldithio)- 1,3,4-thiadiazole-2(3H)-thione (CAS RN 97503-12-3), for use in the manufacture of lubricating oils

3811290085 80

- - - Additives consisting of a mixture of 3-((C9-11)-isoalkyloxy)tetrahydrothiophene 1,1-dioxide, C10-rich (CAS RN 398141-87-2), for use in the manufacture of lubricating oils 

3811290090 80

- - - Other

3811900000 80

- Other

3811900010 80

- - Dinonylnaphthylsulphonic acid salt, in a mineral oil solution

3811900040 80

- - Solution of a quaternary ammonium salt based on polyisobutenyl succinimide, containing by weight 10% or more but not more than 29,9% of 2-ethylhexanol

3811900050 80

- - Corrosion inhibitor containing : - polyisobutenyl succinic acid and - more than 5 % and not more than 20 % by weight of mineral oils for use in the manufacture of blends of additives for fuels

3811900090 80

- - Other

3811190090 80

- - - Other

3811210000 10

- Additives for lubricating oils