Restrictions commerciales pour l'importation de marchandises pour 3901908093 80
Origine Pays d'origine | Début | Droit / Impôt | Légal
Base légale
Type de mesure | |
---|---|---|---|---|
1011
|
ERGA OMNES 1011 | 01/01/2017
|
6.500 % | Regulation 1821/16
Droit des pays tiers
103
|
1011
|
ERGA OMNES 1011 | 01/01/2023
|
0.000 % | Draft 0022/22
Suspension autonome sous utilisation finale
115
|
Explication des restrictions commerciales
Erga Omnes signifie "pour tous".
Les pays tiers sont des pays qui n'appartiennent pas à l'UE.
Le SPG signifie 'Système de préférences généralisées'.
Le SPG+ signifie 'Système de préférences généralisées Plus'.
European Economic Area (EEA) signifie tous les États membres de l'UE et l'Islande, le Liechtenstein et la Norvège.
Les PTOM sont des "Pays et territoires d'outre-mer". Ils ne sont pas membres de l'UE. Plus d'informations
'CARIFORUM est une organisation régionale d'intégration économique comprenant 15 États membres de la Communauté des Caraïbes (CARICOM) et la République dominicaine.'
'L'APE SADC signifie "Southern African Development Community - Economic Partnership Agreement" (Accord de partenariat économique).'
Droit signifie "droit de douane".
Informations
Lorsque vous importez ou exportez "Copolymer of ethylene, vinyl acetate and carbon monoxide, for use as a plasticizer in the manufacture of roof sheets", il est important d'avoir le bon code SH ou code TARIC. Le code HS 3901908093 80 est le code standard pour ce produit et garantit l'application des droits et taxes appropriés lorsqu'il franchit les frontières internationales.
Pour assurer un déroulement fluide de vos activités d'importation ou d'exportation de "Copolymer of ethylene, vinyl acetate and carbon monoxide, for use as a plasticizer in the manufacture of roof sheets", veuillez noter les points suivants :
- Informez-vous sur les régulations spécifiques à l'importation et à l'exportation dans les pays concernés. Cela comprend les restrictions, taxes et droits éventuels applicables sur "Copolymer of ethylene, vinyl acetate and carbon monoxide, for use as a plasticizer in the manufacture of roof sheets".
- Vérifiez si des licences, autorisations ou certificats supplémentaires sont nécessaires pour importer "Copolymer of ethylene, vinyl acetate and carbon monoxide, for use as a plasticizer in the manufacture of roof sheets" dans le pays de destination ou l'exporter depuis le pays d'origine.
- Assurez-vous que vos partenaires commerciaux disposent de numéros d'identification valides, tels que le numéro EORI (Economic Operators Registration and Identification) au sein de l'UE, afin de fluidifier les échanges et minimiser les retards.
- Vérifiez que tous les documents relatifs au commerce et aux douanes (facture commerciale, liste de colisage, certificats d'origine et polices d'assurance) sont correctement remplis et conformes aux régulations nationales respectives.
- Suivez les taux de change actuels ainsi que les coûts d'emballage, de transport et d'assurance afin de calculer avec précision le coût commercial.
En résumé, le code HS-Code ou le code TARIC pour "Copolymer of ethylene, vinyl acetate and carbon monoxide, for use as a plasticizer in the manufacture of roof sheets" est 3901908093 80. Assurez-vous d'utiliser correctement ce code dans tous vos documents commerciaux et douaniers pour garantir des transactions fluides et sans problème. Avec ces conseils, vous serez mieux préparé pour relever les défis du commerce international et réussir à importer et exporter "Copolymer of ethylene, vinyl acetate and carbon monoxide, for use as a plasticizer in the manufacture of roof sheets".
Structure du HS-Code
1. Chapitre
Il y a 21 sections différentes qui sont divisées en 96 chapitres. Les chapitres d'exception comprennent le chapitre 77, qui est réservé à une utilisation future, les chapitres 98 et 99, qui sont limités au niveau national, et le chapitre 99, qui est un code spécifique pour les modifications temporaires. Dans l'exemple ci-dessus, le chapitre 39 a été sélectionné pour plastics and articles thereof
2. Titre
3. Sous-titre
Les deux derniers chiffres du code harmonisé international sont plus spécifiques et définissent des sous-catégories de produits. Dans l'exemple ci-dessus, la 90 se réfère à Copolymer of ethylene, vinyl acetate and carbon monoxide, for use as a plasticizer in the manufacture of roof sheets.
Arborescence HS-Code
3900000000 80
Chapitre PLASTICS AND ARTICLES THEREOF
3901000000 10
I. PRIMARY FORMS
3901000000 80
Polymers of ethylene, in primary forms
3901100000 80
- Polyethylene having a specific gravity of less than 0,94
3901101000 80
- - Linear polyethylene
3901101020 80
- - - High flow linear low density polyethylene-1-butene / LLDPE (CAS RN 25087-34-7) in form of powder, with -a melt flow rate (MFR 190 °C/2,16 kg) of 16g/10min or more, but not more than 24 g/10 min and -a density (ASTM D 1505) of 0,922 g/cm³ or more, but not more than 0,926 g/cm³ and -a vicat softening temperature of min. 94 °C
3901101050 80
- - - Copolymer of ethylene and 1-butene (CAS RN 25087-34-7) with: -a density (ASTM D 1505) of 0,924 g/cm³ or more but not more than 0,928 g/cm³, -a melt flow rate (190 °C/2,16 kg) of 48 g/10 min or more but not more than 52 g/10 min, and -a peak melting temperature of 120 °C or more but not more than 124 °C
3901101060 80
- - - Copolymer of ethylene and 1-butene (CAS RN 25087-34-7) with: -a density (ASTM D 1505) of 0,922 g/cm³ or more but not more than 0,926 g/cm³ and -a melt flow rate (190 °C/2,16 kg) of 18 g/10 min or more but not more than 22 g/10 min
3901101090 80
- - - Other
3901109000 80
- - Other
3901109030 80
- - - Polyethylene granules, containing by weight 10 % or more but not more than 25 % of copper
3901109090 80
- - - Other
3901200000 80
- Polyethylene having a specific gravity of 0,94 or more
3901201000 80
- - Polyethylene in one of the forms mentioned in note 6(b) to this chapter, of a specific gravity of 0,958 or more at 23 °C, containing: - 50 mg/kg or less of aluminium, - 2 mg/kg or less of calcium, - 2 mg/kg or less of chromium, - 2 mg/kg or less of iron, - 2 mg/kg or less of nickel, - 2 mg/kg or less of titanium and - 8 mg/kg or less of vanadium, for the manufacture of chlorosulphonated polyethylene
3901209000 80
- - Other
3901300000 80
- Ethylene-vinyl acetate copolymers
3901300010 80
- - For cavity filling, for use in certain types of aircraft
3901300099 80
- - Other
3901400000 80
- Ethylene-alpha-olefin copolymers, having a specific gravity of less than 0,94
3901400010 80
- - High flow linear low density polyethylene-1-butene / LLDPE (CAS RN 25087-34-7) in form of powder, with -a melt flow rate (MFR 190 °C/2,16 kg) of 16g/10 min or more, but not more than 24 g/10 min and -a density (ASTM D 1505) of 0,922 g/cm³ or more, but not more than 0,926 g/cm³ and -a vicat softening temperature of min. 94 °C
3901400030 80
- - Octene linear low-density polyethylene (LLDPE) produced by a Ziegler-Natta catalyst method in the form of pellets with: - more than 10 % but not more than 20 % by weight of copolymer, - a melt flow rate (MFR 190°C/2,16 kg) of 0,7 g / 10 min or more but not more than 0,9 g / 10 min, and - a density (ASTM D4703) of 0,911 g/cm³ or more, but not more than 0,913 g/cm³ for use in the co-extrusion processing of films for flexible food packaging
3901400050 80
- - Copolymer of ethylene and 1-butene (CAS RN 25087-34-7) with: -a density (ASTM D 1505) of 0,924 g/cm³ or more but not more than 0,928 g/cm³, -a melt flow rate (190 °C/2,16 kg) of 48 g/10 min or more but not more than 52 g/10 min, and -a peak melting temperature of 120 °C or more but not more than 124 °C
3901400060 80
- - Copolymer of ethylene and 1-butene (CAS RN 25087-34-7) with: -a density (ASTM D 1505) of 0,922 g/cm³ or more but not more than 0,926 g/cm³ and -a melt flow rate (190 °C/2,16 kg) of 18 g/10 min or more but not more than 22 g/10 min
3901400090 80
- - Other
3901900000 80
- Other
3901903000 80
- - Ionomer resin consisting of a salt of a terpolymer of ethylene with isobutyl acrylate and methacrylic acid; A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight 35 % or less of styrene, in one of the forms mentioned in note 6(b) to this chapter
3901908000 80
- - Other
3901908010 80
- - - For cavity filling, for use in certain types of aircraft
3901908053 10
- - - Other
3901908053 80
- - - - Copolymer of ethylene and acrylic acid (CAS RN 9010-77-9) with - an acrylic acid content of 18,5 % or more but not more than 49,5 % by weight (ASTM D4094), and - a melt flow rate of 10g/10 min (MFR 125 °C/2.16 kg, ASTM D1238) or more
3901908055 80
- - - - Zinc or sodium salt of an ethylene and acrylic acid copolymer, with: - an acrylic acid content of 6 % or more but not more than 50 % by weight, and - a melt flow rate of 1g/10 min or more at 190 °C/2.16 kg (measured using ASTM D1238)
3901908067 80
- - - - Copolymer made exclusively from ethylene and methacrylic acid monomers in which the methacrylic acid content is 11 % by weight or more
3901908073 80
- - - - Mixture containing by weight - 80 % or more, but not more than 94 % of chlorinated polyethylene (CAS RN 64754-90-1) and - 6 % or more, but not more than 20 % of styrene-acrylic copolymer (CAS RN 27136-15-8)
3901908091 80
- - - - Ionomer resin consisting of a salt of a copolymer of ethylene with methacrylic acid
3901908092 80
- - - - Chlorosulphonated polyethylene
3901908093 80
- - - - Copolymer of ethylene, vinyl acetate and carbon monoxide, for use as a plasticizer in the manufacture of roof sheets
3901908094 80
- - - - Mixtures of A-B block copolymer of polystyrene and ethylene-butylene copolymer and A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight not more than 35 % of styrene
3901908097 80
- - - - Chlorinated polyethylene, in the form of powder
3901908099 80
- - - - Other