Tariff number Chapter 72
7201
I. PRIMARY MATERIALS; PRODUCTS IN GRANULAR OR POWDER FORM
7201000000 10
I. PRIMARY MATERIALS; PRODUCTS IN GRANULAR OR POWDER FORM
7201000000 80
Pig iron and spiegeleisen in pigs, blocks or other primary forms
7201100000 80
- Non-alloy pig iron containing by weight 0,5 % or less of phosphorus
7201101100 10
- - Containing by weight not less than 0,4 % of manganese
7201101100 80
- - - Containing by weight 1 % or less of silicon
7201101900 80
- - - Containing by weight more than 1 % of silicon
7201103000 80
- - Containing by weight not less than 0,1 % but less than 0,4 % of manganese
7201109000 80
- - Containing by weight less than 0,1 % of manganese
7201200000 80
- Non-alloy pig iron containing by weight more than 0,5 % of phosphorus
7201500000 80
- Alloy pig iron; spiegeleisen
7201501000 80
- - Alloy pig iron containing by weight not less than 0,3 % but not more than 1 % of titanium and not less than 0,5 % but not more than 1 % of vanadium
7201509000 80
- - Other
7202
Ferro-alloys
7202000000 80
Ferro-alloys
7202110000 10
- Ferro-manganese
7202110000 80
- - Containing by weight more than 2 % of carbon
7202112000 80
- - - With a granulometry not exceeding 5 mm and a manganese content by weight exceeding 65 %
7202118000 80
- - - Other
7202190000 80
- - Other
7202210000 10
- Ferro-silicon
7202210000 80
- - Containing by weight more than 55 % of silicon
7202290000 80
- - Other
7202291000 80
- - - Containing by weight 4 % or more but not more than 10 % of magnesium
7202299000 80
- - - Other
7202300000 80
- Ferro-silico-manganese
7202410000 10
- Ferro-chromium
7202410000 80
- - Containing by weight more than 4 % of carbon
7202411000 80
- - - Containing by weight more than 4 % but not more than 6 % of carbon
7202419000 80
- - - Containing by weight more than 6 % of carbon
7202490000 80
- - Other
7202491000 80
- - - Containing by weight not more than 0,05 % of carbon
7202495000 80
- - - Containing by weight more than 0,05 % but not more than 0,5 % of carbon
7202499000 80
- - - Containing by weight more than 0,5 % but not more than 4 % of carbon
7202500000 80
- Ferro-silico-chromium
7202600000 80
- Ferro-nickel
7202700000 80
- Ferro-molybdenum
7202800000 80
- Ferro-tungsten and ferro-silico-tungsten
7202910000 10
- Other
7202910000 80
- - Ferro-titanium and ferro-silico-titanium
7202920000 80
- - Ferro-vanadium
7202930000 80
- - Ferro-niobium
7202990000 80
- - Other
7202991000 80
- - - Ferro-phosphorus
7202993000 80
- - - Ferro-silico-magnesium
7202998000 80
- - - Other
7203
Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94 %, in lumps, pellets or similar forms
7203000000 80
Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94 %, in lumps, pellets or similar forms
7203100000 80
- Ferrous products obtained by direct reduction of iron ore
7203900000 80
- Other
7204
Ferrous waste and scrap; remelting scrap ingots of iron or steel
7204000000 80
Ferrous waste and scrap; remelting scrap ingots of iron or steel
7204100000 80
- Waste and scrap of cast iron
7204210000 10
- Waste and scrap of alloy steel
7204210000 80
- - Of stainless steel
7204211000 80
- - - Containing by weight 8 % or more of nickel
7204219000 80
- - - Other
7204290000 80
- - Other
7204300000 80
- Waste and scrap of tinned iron or steel
7204410000 10
- Other waste and scrap
7204410000 80
- - Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles
7204411000 80
- - - Turnings, shavings, chips, milling waste, sawdust and filings
7204419100 10
- - - Trimmings and stampings
7204419100 80
- - - - In bundles
7204419900 80
- - - - Other
7204490000 80
- - Other
7204491000 80
- - - Fragmentised (shredded)
7204493000 10
- - - Other
7204493000 80
- - - - In bundles
7204499000 80
- - - - Other
7204500000 80
- Remelting scrap ingots
7205
Granules and powders, of pig iron, spiegeleisen, iron or steel
7206
II. IRON AND NON-ALLOY STEEL
7207
Semi-finished products of iron or non-alloy steel
7207000000 80
Semi-finished products of iron or non-alloy steel
7207110000 10
- Containing by weight less than 0,25 % of carbon
7207110000 80
- - Of rectangular (including square) cross-section, the width measuring less than twice the thickness
7207111100 10
- - - Rolled or obtained by continuous casting
7207111100 80
- - - - Of free-cutting steel
7207111400 10
- - - - Other
7207111400 80
- - - - - Of a thickness not exceeding 130 mm
7207111600 80
- - - - - Of a thickness exceeding 130 mm
7207119000 80
- - - Forged
7207120000 80
- - Other, of rectangular (other than square) cross-section
7207121000 80
- - - Rolled or obtained by continuous casting
7207129000 80
- - - Forged
7207190000 80
- - Other
7207191200 10
- - - Of circular or polygonal cross-section
7207191200 80
- - - - Rolled or obtained by continuous casting
7207191900 80
- - - - Forged
7207198000 80
- - - Other
7207200000 80
- Containing by weight 0,25 % or more of carbon
7207201100 10
- - Of rectangular (including square) cross-section, the width measuring less than twice the thickness
7207201100 20
- - - Rolled or obtained by continuous casting
7207201100 80
- - - - Of free-cutting steel
7207201500 10
- - - - Other, containing by weight
7207201500 80
- - - - - 0,25 % or more but less than 0,6 % of carbon
7207201700 80
- - - - - 0,6 % or more of carbon
7207201900 80
- - - Forged
7207203200 10
- - Other, of rectangular (other than square) cross-section
7207203200 80
- - - Rolled or obtained by continuous casting
7207203900 80
- - - Forged
7207205200 10
- - Of circular or polygonal cross-section
7207205200 80
- - - Rolled or obtained by continuous casting
7207205900 80
- - - Forged
7207208000 80
- - Other
7208
Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated
7208000000 80
Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated
7208100000 80
- In coils, not further worked than hot-rolled, with patterns in relief
7208250000 10
- Other, in coils, not further worked than hot-rolled, pickled
7208250000 80
- - Of a thickness of 4,75 mm or more
7208260000 80
- - Of a thickness of 3 mm or more but less than 4,75 mm
7208270000 80
- - Of a thickness of less than 3 mm
7208360000 10
- Other, in coils, not further worked than hot-rolled
7208360000 80
- - Of a thickness exceeding 10 mm
7208370000 80
- - Of a thickness of 4,75 mm or more but not exceeding 10 mm
7208380000 80
- - Of a thickness of 3 mm or more but less than 4,75 mm
7208390000 80
- - Of a thickness of less than 3 mm
7208400000 80
- Not in coils, not further worked than hot-rolled, with patterns in relief
7208510000 10
- Other, not in coils, not further worked than hot-rolled
7208510000 80
- - Of a thickness exceeding 10 mm
7208512000 80
- - - Of a thickness exceeding 15 mm
7208519100 10
- - - Of a thickness exceeding 10 mm but not exceeding 15 mm, of a width of
7208519100 80
- - - - 2 050 mm or more
7208519800 80
- - - - Less than 2 050 mm
7208520000 80
- - Of a thickness of 4,75 mm or more but not exceeding 10 mm
7208521000 80
- - - Rolled on four faces or in a closed box pass, of a width not exceeding 1 250 mm
7208529100 10
- - - Other, of a width of
7208529100 80
- - - - 2 050 mm or more
7208529900 80
- - - - Less than 2 050 mm
7208530000 80
- - Of a thickness of 3 mm or more but less than 4,75 mm
7208531000 80
- - - Rolled on four faces or in a closed box pass, of a width not exceeding 1 250 mm and of a thickness of 4 mm or more
7208539000 80
- - - Other
7208540000 80
- - Of a thickness of less than 3 mm
7208900000 80
- Other
7208902000 80
- - Perforated
7208908000 80
- - Other
7209
Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated
7209000000 80
Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated
7209150000 10
- In coils, not further worked than cold-rolled (cold-reduced)
7209150000 80
- - Of a thickness of 3 mm or more
7209160000 80
- - Of a thickness exceeding 1 mm but less than 3 mm
7209161000 80
- - - 'Electrical'
7209169000 80
- - - Other
7209170000 80
- - Of a thickness of 0,5 mm or more but not exceeding 1 mm
7209171000 80
- - - 'Electrical'
7209179000 80
- - - Other
7209180000 80
- - Of a thickness of less than 0,5 mm
7209181000 80
- - - 'Electrical'
7209189100 10
- - - Other
7209189100 80
- - - - Of a thickness of 0,35 mm or more but less than 0,5 mm
7209189900 80
- - - - Of a thickness of less than 0,35 mm
7209250000 10
- Not in coils, not further worked than cold-rolled (cold-reduced)
7209250000 80
- - Of a thickness of 3 mm or more
7209260000 80
- - Of a thickness exceeding 1 mm but less than 3 mm
7209261000 80
- - - 'Electrical'
7209269000 80
- - - Other
7209270000 80
- - Of a thickness of 0,5 mm or more but not exceeding 1 mm
7209271000 80
- - - 'Electrical'
7209279000 80
- - - Other
7209280000 80
- - Of a thickness of less than 0,5 mm
7209281000 80
- - - 'Electrical'
7209289000 80
- - - Other
7209900000 80
- Other
7209902000 80
- - Perforated
7209908000 80
- - Other
7210
Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated
7210000000 80
Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated
7210110000 10
- Plated or coated with tin
7210110000 80
- - Of a thickness of 0,5 mm or more
7210120000 80
- - Of a thickness of less than 0,5 mm
7210122000 80
- - - Tinplate
7210128000 80
- - - Other
7210200000 80
- Plated or coated with lead, including terne-plate
7210300000 80
- Electrolytically plated or coated with zinc
7210410000 10
- Otherwise plated or coated with zinc
7210410000 80
- - Corrugated
7210490000 80
- - Other
7210500000 80
- Plated or coated with chromium oxides or with chromium and chromium oxides
7210610000 10
- Plated or coated with aluminium
7210610000 80
- - Plated or coated with aluminium-zinc alloys
7210690000 80
- - Other
7210700000 80
- Painted, varnished or coated with plastics
7210701000 80
- - Tinplate, varnished; products, plated or coated with chromium oxides or with chromium and chromium oxides, varnished
7210708000 80
- - Other
7210900000 80
- Other
7210903000 80
- - Clad
7210904000 80
- - Tinned and printed
7210908000 80
- - Other
7211
Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated
7211000000 80
Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated
7211130000 10
- Not further worked than hot-rolled
7211130000 80
- - Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief
7211140000 80
- - Other, of a thickness of 4,75 mm or more
7211190000 80
- - Other
7211230000 10
- Not further worked than cold-rolled (cold-reduced)
7211230000 80
- - Containing by weight less than 0,25 % of carbon
7211232000 80
- - - 'Electrical'
7211233000 10
- - - Other
7211233000 80
- - - - Of a thickness of 0,35 mm or more
7211238000 80
- - - - Of a thickness of less than 0,35 mm
7211290000 80
- - Other
7211900000 80
- Other
7211902000 80
- - Perforated
7211908000 80
- - Other
7212
Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated
7212000000 80
Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated
7212100000 80
- Plated or coated with tin
7212101000 80
- - Tinplate, not further worked than surface-treated
7212109000 80
- - Other
7212200000 80
- Electrolytically plated or coated with zinc
7212300000 80
- Otherwise plated or coated with zinc
7212400000 80
- Painted, varnished or coated with plastics
7212402000 80
- - Tinplate, not further worked than varnished; products, plated or coated with chromium oxides or with chromium and chromium oxides, varnished
7212408000 80
- - Other
7212500000 80
- Otherwise plated or coated
7212502000 80
- - Plated or coated with chromium oxides or with chromium and chromium oxides
7212503000 80
- - Plated or coated with chromium or nickel
7212504000 80
- - Plated or coated with copper
7212506100 10
- - Plated or coated with aluminium
7212506100 80
- - - Plated or coated with aluminium-zinc alloys
7212506900 80
- - - Other
7212509000 80
- - Other
7212600000 80
- Clad
7213
Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel
7213000000 80
Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel
7213100000 80
- Containing indentations, ribs, grooves or other deformations produced during the rolling process
7213200000 80
- Other, of free-cutting steel
7213910000 10
- Other
7213910000 80
- - Of circular cross-section measuring less than 14 mm in diameter
7213911000 80
- - - Of a type used for concrete reinforcement
7213912000 80
- - - Of a type used for tyre cord
7213914100 10
- - - Other
7213914100 80
- - - - Containing by weight 0,06 % or less of carbon
7213914900 80
- - - - Containing by weight more than 0,06 % but less than 0,25 % of carbon
7213917000 80
- - - - Containing by weight 0,25 % or more but not more than 0,75 % of carbon
7213919000 80
- - - - Containing by weight more than 0,75 % of carbon
7213990000 80
- - Other
7213991000 80
- - - Containing by weight less than 0,25 % of carbon
7213999000 80
- - - Containing by weight 0,25 % or more of carbon
7214
Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling
7214000000 80
Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling
7214100000 80
- Forged
7214200000 80
- Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling
7214300000 80
- Other, of free-cutting steel
7214910000 10
- Other
7214910000 80
- - Of rectangular (other than square) cross-section
7214911000 80
- - - Containing by weight less than 0,25 % of carbon
7214919000 80
- - - Containing by weight 0,25 % or more of carbon
7214990000 80
- - Other
7214991000 10
- - - Containing by weight less than 0,25 % of carbon
7214991000 80
- - - - Of a type used for concrete reinforcement
7214993100 10
- - - - Other, of circular cross-section measuring in diameter
7214993100 80
- - - - - 80 mm or more
7214993900 80
- - - - - Less than 80 mm
7214995000 80
- - - - Other
7214997100 10
- - - Containing by weight 0,25 % or more of carbon
7214997100 20
- - - - Of a circular cross-section measuring in diameter
7214997100 80
- - - - - 80 mm or more
7214997900 80
- - - - - Less than 80 mm
7214999500 80
- - - - Other
7215
Other bars and rods of iron or non-alloy steel
7215000000 80
Other bars and rods of iron or non-alloy steel
7215100000 80
- Of free-cutting steel, not further worked than cold-formed or cold-finished
7215500000 80
- Other, not further worked than cold-formed or cold-finished
7215501100 10
- - Containing by weight less than 0,25 % of carbon
7215501100 80
- - - Of rectangular (other than square) cross-section
7215501900 80
- - - Other
7215508000 80
- - Containing by weight 0,25 % or more of carbon
7215900000 80
- Other
7216
Angles, shapes and sections of iron or non-alloy steel
7216000000 80
Angles, shapes and sections of iron or non-alloy steel
7216100000 80
- U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm
7216210000 10
- L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm
7216210000 80
- - L sections
7216220000 80
- - T sections
7216310000 10
- U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more
7216310000 80
- - U sections
7216311000 80
- - - Of a height of 80 mm or more but not exceeding 220 mm
7216319000 80
- - - Of a height exceeding 220 mm
7216320000 80
- - I sections
7216321100 10
- - - Of a height of 80 mm or more but not exceeding 220 mm
7216321100 80
- - - - With parallel flange faces
7216321900 80
- - - - Other
7216329100 10
- - - Of a height exceeding 220 mm
7216329100 80
- - - - With parallel flange faces
7216329900 80
- - - - Other
7216330000 80
- - H sections
7216331000 80
- - - Of a height of 80 mm or more but not exceeding 180 mm
7216339000 80
- - - Of a height exceeding 180 mm
7216400000 80
- L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more
7216401000 80
- - L sections
7216409000 80
- - T sections
7216500000 80
- Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded
7216501000 80
- - With a cross-section which is capable of being enclosed in a square the side of which is 80 mm
7216509100 10
- - Other
7216509100 80
- - - Bulb flats
7216509900 80
- - - Other
7216610000 10
- Angles, shapes and sections, not further worked than cold-formed or cold-finished
7216610000 80
- - Obtained from flat-rolled products
7216611000 80
- - - C, L, U, Z, omega or open-ended sections
7216619000 80
- - - Other
7216690000 80
- - Other
7216910000 10
- Other
7216910000 80
- - Cold-formed or cold-finished from flat-rolled products
7216911000 80
- - - Profiled (ribbed) sheets
7216918000 80
- - - Other
7216990000 80
- - Other
7217
Wire of iron or non-alloy steel
7217000000 80
Wire of iron or non-alloy steel
7217100000 80
- Not plated or coated, whether or not polished
7217101000 10
- - Containing by weight less than 0,25 % of carbon
7217101000 80
- - - With a maximum cross-sectional dimension of less than 0,8 mm
7217103100 10
- - - With a maximum cross-sectional dimension of 0,8 mm or more
7217103100 80
- - - - Containing indentations, ribs, grooves or other deformations produced during the rolling process
7217103900 80
- - - - Other
7217105000 80
- - Containing by weight 0,25 % or more but less than 0,6 % of carbon
7217109000 80
- - Containing by weight 0,6 % or more of carbon
7217200000 80
- Plated or coated with zinc
7217201000 10
- - Containing by weight less than 0,25 % of carbon
7217201000 80
- - - With a maximum cross-sectional dimension of less than 0,8 mm
7217203000 80
- - - With a maximum cross-sectional dimension of 0,8 mm or more
7217205000 80
- - Containing by weight 0,25 % or more but less than 0,6 % of carbon
7217209000 80
- - Containing by weight 0,6 % or more of carbon
7217300000 80
- Plated or coated with other base metals
7217304100 10
- - Containing by weight less than 0,25 % of carbon
7217304100 80
- - - Copper-coated
7217304900 80
- - - Other
7217305000 80
- - Containing by weight 0,25 % or more but less than 0,6 % of carbon
7217309000 80
- - Containing by weight 0,6 % or more of carbon
7217900000 80
- Other
7217902000 80
- - Containing by weight less than 0,25 % of carbon
7217905000 80
- - Containing by weight 0,25 % or more but less than 0,6 % of carbon
7217909000 80
- - Containing by weight 0,6 % or more of carbon
7218
III. STAINLESS STEEL
7218000000 10
III. STAINLESS STEEL
7218000000 80
Stainless steel in ingots or other primary forms; semi-finished products of stainless steel
7218100000 80
- Ingots and other primary forms
7218910000 10
- Other
7218910000 80
- - Of rectangular (other than square) cross-section
7218911000 80
- - - Containing by weight 2,5 % or more of nickel
7218918000 80
- - - Containing by weight less than 2,5 % of nickel
7218990000 80
- - Other
7218991100 10
- - - Of square cross-section
7218991100 80
- - - - Rolled or obtained by continous casting
7218991900 80
- - - - Forged
7218992000 10
- - - Other
7218992000 80
- - - - Rolled or obtained by continuous casting
7218998000 80
- - - - Forged
7219
Flat-rolled products of stainless steel, of a width of 600 mm or more
7219000000 80
Flat-rolled products of stainless steel, of a width of 600 mm or more
7219110000 10
- Not further worked than hot-rolled, in coils
7219110000 80
- - Of a thickness exceeding 10 mm
7219120000 80
- - Of a thickness of 4,75 mm or more but not exceeding 10 mm
7219121000 80
- - - Containing by weight 2,5 % or more of nickel
7219129000 80
- - - Containing by weight less than 2,5 % of nickel
7219130000 80
- - Of a thickness of 3 mm or more but less than 4,75 mm
7219131000 80
- - - Containing by weight 2,5 % or more of nickel
7219139000 80
- - - Containing by weight less than 2,5 % of nickel
7219140000 80
- - Of a thickness of less than 3 mm
7219141000 80
- - - Containing by weight 2,5 % or more of nickel
7219149000 80
- - - Containing by weight less than 2,5 % of nickel
7219210000 10
- Not further worked than hot-rolled, not in coils
7219210000 80
- - Of a thickness exceeding 10 mm
7219211000 80
- - - Containing by weight 2,5 % or more of nickel
7219219000 80
- - - Containing by weight less than 2,5 % of nickel
7219220000 80
- - Of a thickness of 4,75 mm or more but not exceeding 10 mm
7219221000 80
- - - Containing by weight 2,5 % or more of nickel
7219229000 80
- - - Containing by weight less than 2,5 % of nickel
7219230000 80
- - Of a thickness of 3 mm or more but less than 4,75 mm
7219240000 80
- - Of a thickness of less than 3 mm
7219310000 10
- Not further worked than cold-rolled (cold-reduced)
7219310000 80
- - Of a thickness of 4,75 mm or more
7219320000 80
- - Of a thickness of 3 mm or more but less than 4,75 mm
7219321000 80
- - - Containing by weight 2,5 % or more of nickel
7219329000 80
- - - Containing by weight less than 2,5 % of nickel
7219330000 80
- - Of a thickness exceeding 1 mm but less than 3 mm
7219331000 80
- - - Containing by weight 2,5 % or more of nickel
7219339000 80
- - - Containing by weight less than 2,5 % of nickel
7219340000 80
- - Of a thickness of 0,5 mm or more but not exceeding 1 mm
7219341000 80
- - - Containing by weight 2,5 % or more of nickel
7219349000 80
- - - Containing by weight less than 2,5 % of nickel
7219350000 80
- - Of a thickness of less than 0,5 mm
7219351000 80
- - - Containing by weight 2,5 % or more of nickel
7219359000 80
- - - Containing by weight less than 2,5 % of nickel
7219900000 80
- Other
7219902000 80
- - Perforated
7219908000 80
- - Other
7220
Flat-rolled products of stainless steel, of a width of less than 600 mm
7220000000 80
Flat-rolled products of stainless steel, of a width of less than 600 mm
7220110000 10
- Not further worked than hot-rolled
7220110000 80
- - Of a thickness of 4,75 mm or more
7220120000 80
- - Of a thickness of less than 4,75 mm
7220200000 80
- Not further worked than cold-rolled (cold-reduced)
7220202100 10
- - Of a thickness of 3 mm or more, containing by weight
7220202100 80
- - - 2,5 % or more of nickel
7220202900 80
- - - Less than 2,5 % of nickel
7220204100 10
- - Of a thickness exceeding 0,35 mm but of less than 3 mm, containing by weight
7220204100 80
- - - 2,5 % or more of nickel
7220204900 80
- - - Less than 2,5 % of nickel
7220208100 10
- - Of a thickness not exceeding 0,35 mm, containing by weight
7220208100 80
- - - 2,5 % or more of nickel
7220208900 80
- - - Less than 2,5 % of nickel
7220900000 80
- Other
7220902000 80
- - Perforated
7220908000 80
- - Other
7221
Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel
7222
Other bars and rods of stainless steel; angles, shapes and sections of stainless steel
7222000000 80
Other bars and rods of stainless steel; angles, shapes and sections of stainless steel
7222110000 10
- Bars and rods, not further worked than hot-rolled, hot-drawn or extruded
7222110000 80
- - Of circular cross-section
7222111100 10
- - - Of a diameter of 80 mm or more, containing by weight
7222111100 80
- - - - 2,5 % or more of nickel
7222111900 80
- - - - Less than 2,5 % of nickel
7222118100 10
- - - Of a diameter of less than 80 mm, containing by weight
7222118100 80
- - - - 2,5 % or more of nickel
7222118900 80
- - - - Less than 2,5 % of nickel
7222190000 80
- - Other
7222191000 80
- - - Containing by weight 2,5 % or more of nickel
7222199000 80
- - - Containing by weight less than 2,5 % of nickel
7222200000 80
- Bars and rods, not further worked than cold-formed or cold-finished
7222201100 10
- - Of circular cross-section
7222201100 20
- - - Of a diameter of 80 mm or more, containing by weight
7222201100 80
- - - - 2,5 % or more of nickel
7222201900 80
- - - - Less than 2,5 % of nickel
7222202100 10
- - - Of a diameter of 25 mm or more, but less than 80 mm, containing by weight
7222202100 80
- - - - 2,5 % or more of nickel
7222202900 80
- - - - Less than 2,5 % of nickel
7222203100 10
- - - Of a diameter of less than 25 mm, containing by weight
7222203100 80
- - - - 2,5 % or more of nickel
7222203900 80
- - - - Less than 2,5 % of nickel
7222208100 10
- - Other, containing by weight
7222208100 80
- - - 2,5 % or more of nickel
7222208900 80
- - - Less than 2,5 % of nickel
7222300000 80
- Other bars and rods
7222305100 10
- - Forged, containing by weight
7222305100 80
- - - 2,5 % or more of nickel
7222309100 80
- - - Less than 2,5 % of nickel
7222309700 80
- - Other
7222400000 80
- Angles, shapes and sections
7222401000 80
- - Not further worked than hot-rolled, hot-drawn or extruded
7222405000 80
- - Not further worked than cold-formed or cold-finished
7222409000 80
- - Other
7223
Wire of stainless steel
7223000000 80
Wire of stainless steel
7223001100 10
- Containing by weight 2,5 % or more of nickel
7223001100 80
- - Containing by weight 28 % or more but not more than 31 % of nickel and 20 % or more but not more than 22 % of chromium
7223001900 80
- - Other
7223009100 10
- Containing by weight less than 2,5 % of nickel
7223009100 80
- - Containing by weight 13 % or more but not more than 25 % of chromium and 3,5 % or more but not more than 6 % of aluminium
7223009900 80
- - Other
7224
IV. OTHER ALLOY STEEL; HOLLOW DRILL BARS AND RODS, OF ALLOY OR NON-ALLOY STEEL
7224000000 10
IV. OTHER ALLOY STEEL; HOLLOW DRILL BARS AND RODS, OF ALLOY OR NON-ALLOY STEEL
7224000000 80
Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel
7224100000 80
- Ingots and other primary forms
7224101000 80
- - Of tool steel
7224109000 80
- - Other
7224900000 80
- Other
7224900200 80
- - Of tool steel
7224900300 10
- - Other
7224900300 20
- - - Of rectangular (including square) cross-section
7224900300 30
- - - - Hot-rolled or obtained by continuous casting
7224900300 40
- - - - - The width measuring less than twice the thickness
7224900300 80
- - - - - - Of high-speed steel
7224900500 80
- - - - - - Containing by weight not more than 0,7 % of carbon, 0,5 % or more but not more than 1,2 % of manganese and 0,6 % or more but not more than 2,3 % of silicon; containing by weight 0,0008 % or more of boron with any other element less than the minimum content referred to in note 1(f) to this chapter
7224900700 80
- - - - - - Other
7224901400 80
- - - - - Other
7224901800 80
- - - - Forged
7224903100 10
- - - Other
7224903100 20
- - - - Hot-rolled or obtained by continuous casting
7224903100 80
- - - - - Containing by weight not less than 0,9 % but not more than 1,15 % of carbon, not less than 0,5 % but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum
7224903800 80
- - - - - Other
7224909000 80
- - - - Forged
7225
Flat-rolled products of other alloy steel, of a width of 600 mm or more
7225000000 80
Flat-rolled products of other alloy steel, of a width of 600 mm or more
7225110000 10
- Of silicon-electrical steel
7225110000 80
- - Grain-oriented
7225190000 80
- - Other
7225191000 80
- - - Hot-rolled
7225199000 80
- - - Cold-rolled
7225300000 80
- Other, not further worked than hot-rolled, in coils
7225301000 80
- - Of tool steel
7225303000 80
- - Of high-speed steel
7225309000 80
- - Other
7225400000 80
- Other, not further worked than hot-rolled, not in coils
7225401200 80
- - Of tool steel
7225401500 80
- - Of high-speed steel
7225404000 10
- - Other
7225404000 80
- - - Of a thickness exceeding 10 mm
7225406000 80
- - - Of a thickness of 4,75 mm or more but not exceeding 10 mm
7225409000 80
- - - Of a thickness of less than 4,75 mm
7225500000 80
- Other, not further worked than cold-rolled (cold-reduced)
7225502000 80
- - Of high-speed steel
7225508000 80
- - Other
7225910000 10
- Other
7225910000 80
- - Electrolytically plated or coated with zinc
7225920000 80
- - Otherwise plated or coated with zinc
7225990000 80
- - Other
7226
Flat-rolled products of other alloy steel, of a width of less than 600 mm
7226000000 80
Flat-rolled products of other alloy steel, of a width of less than 600 mm
7226110000 10
- Of silicon-electrical steel
7226110000 80
- - Grain-oriented
7226190000 80
- - Other
7226191000 80
- - - Not further worked than hot-rolled
7226198000 80
- - - Other
7226200000 80
- Of high-speed steel
7226910000 10
- Other
7226910000 80
- - Not further worked than hot-rolled
7226912000 80
- - - Of tool steel
7226919100 10
- - - Other
7226919100 80
- - - - Of a thickness of 4,75 mm or more
7226919900 80
- - - - Of a thickness of less than 4,75 mm
7226920000 80
- - Not further worked than cold-rolled (cold-reduced)
7226990000 80
- - Other
7226991000 80
- - - Electrolytically plated or coated with zinc
7226993000 80
- - - Otherwise plated or coated with zinc
7226997000 80
- - - Other
7227
Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel
7227000000 80
Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel
7227100000 80
- Of high-speed steel
7227200000 80
- Of silico-manganese steel
7227900000 80
- Other
7227901000 80
- - Containing by weight 0,0008 % or more of boron with any other element less than the minimum content referred to in note 1(f) to this chapter
7227905000 80
- - Containing by weight 0,9 % or more but not more than 1,15 % of carbon, 0,5 % or more but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum
7227909500 80
- - Other
7228
Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel
7228000000 80
Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel
7228100000 80
- Bars and rods, of high-speed steel
7228102000 80
- - Not further worked than hot-rolled, hot-drawn or extruded; hot-rolled, hot-drawn or extruded, not further worked than clad
7228105000 80
- - Forged
7228109000 80
- - Other
7228200000 80
- Bars and rods, of silico-manganese steel
7228201000 80
- - Of rectangular (other than square) cross-section, hot-rolled on four faces
7228209100 10
- - Other
7228209100 80
- - - Not further worked than hot-rolled, hot-drawn or extruded; hot-rolled, hot-drawn or extruded, not further worked than clad
7228209900 80
- - - Other
7228300000 80
- Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded
7228302000 80
- - Of tool steel
7228304100 10
- - Containing by weight 0,9 % or more but not more than 1,15 % of carbon, 0,5 % or more but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum
7228304100 80
- - - Of circular cross-section of a diameter of 80 mm or more
7228304900 80
- - - Other
7228306100 10
- - Other
7228306100 20
- - - Of circular cross-section, of a diameter of
7228306100 80
- - - - 80 mm or more
7228306900 80
- - - - Less than 80 mm
7228307000 80
- - - Of rectangular (other than square) cross-section, hot-rolled on four faces
7228308900 80
- - - Other
7228400000 80
- Other bars and rods, not further worked than forged
7228401000 80
- - Of tool steel
7228409000 80
- - Other
7228500000 80
- Other bars and rods, not further worked than cold-formed or cold-finished
7228502000 80
- - Of tool steel
7228504000 80
- - Containing by weight 0,9 % or more but not more than 1,15 % of carbon, 0,5 % or more but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum
7228506100 10
- - Other
7228506100 20
- - - Of circular cross-section, of a diameter of
7228506100 80
- - - - 80 mm or more
7228506900 80
- - - - Less than 80 mm
7228508000 80
- - - Other
7228600000 80
- Other bars and rods
7228602000 80
- - Of tool steel
7228608000 80
- - Other
7228700000 80
- Angles, shapes and sections
7228701000 80
- - Not further worked than hot-rolled, hot-drawn or extruded
7228709000 80
- - Other
7228800000 80
- Hollow drill bars and rods
7229
Wire of other alloy steel
7229000000 80
Wire of other alloy steel
7229200000 80
- Of silico-manganese steel
7229900000 80
- Other
7229902000 80
- - Of high-speed steel
7229905000 80
- - Containing by weight 0,9 % or more but not more than 1,15 % of carbon, 0,5 % or more but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum
7229909000 80
- - Other