Restrictions commerciales pour l'importation de marchandises pour 7226200000 80
Origine Pays d'origine | Début | Droit / Impôt | Légal
Base légale
Type de mesure | |
---|---|---|---|---|
5005
|
Countries subject to safeguard measures 5005 | 01/07/2022
30/06/2023
|
0.000 % | Regulation 0159/19
Quota tarifaire non préférentiel
122
|
IN
|
India IN | 01/07/2022
30/06/2023
|
0.000 % | Regulation 0159/19
Quota tarifaire non préférentiel
122
|
KR
|
Korea, Republic of (South Korea) KR | 01/07/2022
30/06/2023
|
0.000 % | Regulation 0159/19
Quota tarifaire non préférentiel
122
|
XS
|
Serbia XS | 01/07/2022
30/06/2023
|
0.000 % | Regulation 0159/19
Quota tarifaire non préférentiel
122
|
GB
|
United Kingdom GB | 01/07/2022
30/06/2023
|
0.000 % | Regulation 0159/19
Quota tarifaire non préférentiel
122
|
5005
|
Countries subject to safeguard measures 5005 | 01/07/2022
|
25.000 % | Regulation 0159/19
Additional duties (safeguard)
696
|
RU
|
Russian Federation RU | 17/12/2022
30/09/2023
|
Cond: Y cert: L-139 (29):; Y cert: L-143 (29):; Y (09): | Regulation 2474/22
Contrôle à l'importation
763
|
Explication des restrictions commerciales
Erga Omnes signifie "pour tous".
Les pays tiers sont des pays qui n'appartiennent pas à l'UE.
Le SPG signifie 'Système de préférences généralisées'.
Le SPG+ signifie 'Système de préférences généralisées Plus'.
European Economic Area (EEA) signifie tous les États membres de l'UE et l'Islande, le Liechtenstein et la Norvège.
Les PTOM sont des "Pays et territoires d'outre-mer". Ils ne sont pas membres de l'UE. Plus d'informations
'CARIFORUM est une organisation régionale d'intégration économique comprenant 15 États membres de la Communauté des Caraïbes (CARICOM) et la République dominicaine.'
'L'APE SADC signifie "Southern African Development Community - Economic Partnership Agreement" (Accord de partenariat économique).'
Droit signifie "droit de douane".
Informations
Lorsque vous importez ou exportez "Of high-speed steel", il est important d'avoir le bon code SH ou code TARIC. Le code HS 7226200000 80 est le code standard pour ce produit et garantit l'application des droits et taxes appropriés lorsqu'il franchit les frontières internationales.
Pour assurer un déroulement fluide de vos activités d'importation ou d'exportation de "Of high-speed steel", veuillez noter les points suivants :
- Informez-vous sur les régulations spécifiques à l'importation et à l'exportation dans les pays concernés. Cela comprend les restrictions, taxes et droits éventuels applicables sur "Of high-speed steel".
- Vérifiez si des licences, autorisations ou certificats supplémentaires sont nécessaires pour importer "Of high-speed steel" dans le pays de destination ou l'exporter depuis le pays d'origine.
- Assurez-vous que vos partenaires commerciaux disposent de numéros d'identification valides, tels que le numéro EORI (Economic Operators Registration and Identification) au sein de l'UE, afin de fluidifier les échanges et minimiser les retards.
- Vérifiez que tous les documents relatifs au commerce et aux douanes (facture commerciale, liste de colisage, certificats d'origine et polices d'assurance) sont correctement remplis et conformes aux régulations nationales respectives.
- Suivez les taux de change actuels ainsi que les coûts d'emballage, de transport et d'assurance afin de calculer avec précision le coût commercial.
En résumé, le code HS-Code ou le code TARIC pour "Of high-speed steel" est 7226200000 80. Assurez-vous d'utiliser correctement ce code dans tous vos documents commerciaux et douaniers pour garantir des transactions fluides et sans problème. Avec ces conseils, vous serez mieux préparé pour relever les défis du commerce international et réussir à importer et exporter "Of high-speed steel".
Structure du HS-Code
1. Chapitre
Il y a 21 sections différentes qui sont divisées en 96 chapitres. Les chapitres d'exception comprennent le chapitre 77, qui est réservé à une utilisation future, les chapitres 98 et 99, qui sont limités au niveau national, et le chapitre 99, qui est un code spécifique pour les modifications temporaires. Dans l'exemple ci-dessus, le chapitre 72 a été sélectionné pour iron and steel
2. Titre
3. Sous-titre
Les deux derniers chiffres du code harmonisé international sont plus spécifiques et définissent des sous-catégories de produits. Dans l'exemple ci-dessus, la 20 se réfère à Of high-speed steel.
Arborescence HS-Code
7200000000 80
Chapitre IRON AND STEEL
7226000000 80
Flat-rolled products of other alloy steel, of a width of less than 600 mm
7226110000 10
- Of silicon-electrical steel
7226110000 80
- - Grain-oriented
7226110012 10
- - - Of a width exceeding 500 mm
7226110012 20
- - - - Of a thickness exceeding 0,16 mm
7226110012 80
- - - - - With a maximum core loss not higher than 0.9 W/kg
7226110014 80
- - - - - With a maximum core loss higher than 0.9 W/kg but not higher than 1,05 W/kg
7226110016 80
- - - - - With a maximum core loss higher than 1,05 W/kg
7226110019 80
- - - - Other
7226110092 10
- - - Of a width not exceeding 500 mm
7226110092 20
- - - - Of a thickness exceeding 0,16 mm
7226110092 80
- - - - - With a maximum core loss not higher than 0.9 W/kg
7226110094 80
- - - - - With a maximum core loss higher than 0.9 W/kg but not higher than 1,05 W/kg
7226110096 80
- - - - - With a maximum core loss higher than 1,05 W/kg
7226110099 80
- - - - Other
7226190000 80
- - Other
7226191000 80
- - - Not further worked than hot-rolled
7226191010 80
- - - - Products clad, plated or coated
7226191091 10
- - - - Other
7226191091 80
- - - - - Of a width not exceeding 350 mm and of a thickness of 50 mm or more
7226191095 80
- - - - - Other
7226198000 80
- - - Other
7226198010 80
- - - - Of a width exceeding 500 mm
7226198090 80
- - - - Of a width not exceeding 500 mm
7226200000 80
- Of high-speed steel
7226200020 80
- - Products further worked than hot rolled, or clad, plated or coated
7226200095 80
- - Other
7226910000 10
- Other
7226910000 80
- - Not further worked than hot-rolled
7226912000 80
- - - Of tool steel
7226919100 10
- - - Other
7226919100 80
- - - - Of a thickness of 4,75 mm or more
7226919111 80
- - - - - Of a width not exceeding 350 mm and of a thickness of 50 mm or more
7226919119 80
- - - - - Other
7226919900 80
- - - - Of a thickness of less than 4,75 mm
7226920000 80
- - Not further worked than cold-rolled (cold-reduced)
7226920010 80
- - - Of a width exceeding 500 mm
7226920090 80
- - - Of a width not exceeding 500 mm
7226990000 80
- - Other
7226991000 80
- - - Electrolytically plated or coated with zinc
7226993000 80
- - - Otherwise plated or coated with zinc
7226993010 80
- - - - Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips
7226993030 80
- - - - Plated or coated by hot dip galvanisation, whether or not alloyed with silicon; chemically passivated; with or without any additional surface treatment such as oiling or sealing; containing by weight: not more than 0,5% of carbon, not more than 1,1% of aluminium, not more than 0,12% of niobium, not more than 0,17% of titanium and not more than 0,15% of vanadium; presented in coils, cut-to-length sheets and narrow strips
7226993090 80
- - - - Other
7226997000 80
- - - Other
7226997011 10
- - - - Of a width not exceeding 500 mm, hot-rolled, not further worked than clad; of a width exceeding 500 mm, not further worked than surface-treated, including cladding
7226997011 80
- - - - - Painted, varnished or coated with plastics on at least one side, excluding products with a final coating of zinc-dust (a zinc-rich paint, containing by weight 70% or more of zinc) and excluding products with a substrate with a metallic coating of chromium or tin
7226997013 80
- - - - - Plated or coated by hot dip galvanisation with magnesium and/or aluminium, whether or not alloyed with zinc, whether or not alloyed with silicon; chemically passivated; with or without additional surface treatment such as oiling or sealing; containing by weight: not more than 0,5% of carbon, not more than 1,1% of aluminium, not more than 0,12% of niobium, not more than 0,17% of titanium and not more than 0,15% of vanadium; presented in coils, cut-to-length sheets and narrow strips
7226997019 80
- - - - - Other
7226997091 10
- - - - Other
7226997091 80
- - - - - Painted, varnished or coated with plastics on at least one side, excluding so-called sandwich panels of a kind used for building applications and consisting of two outer metal sheets with a stabilising core of insulation material sandwiched between them, excluding those products with a final coating of zinc-dust (a zinc-rich paint, containing by weight 70% or more of zinc) and excluding products with a substrate with a metallic coating of chromium or tin
7226997093 80
- - - - - Plated or coated by hot dip galvanisation with magnesium and/or aluminium, whether or not alloyed with zinc, whether or not alloyed with silicon; chemically passivated; with or without additional surface treatment such as oiling or sealing; containing by weight: not more than 0,5% of carbon, not more than 1,1% of aluminium, not more than 0,12% of niobium, not more than 0,17% of titanium and not more than 0,15% of vanadium; presented in coils, cut-to-length sheets and narrow strips
7226997094 80
- - - - - Other, aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips
7226997096 80
- - - - - Other