Tariff number Chapter 72, Section 29
7201
I. PRIMARY MATERIALS; PRODUCTS IN GRANULAR OR POWDER FORM
7201
Non-alloy pig iron containing by weight 0,5 % or less of phosphorus
7201100000 80
- Non-alloy pig iron containing by weight 0,5 % or less of phosphorus
7201101100 10
- - Containing by weight not less than 0,4 % of manganese
7201101100 80
- - - Containing by weight 1 % or less of silicon
7201101900 80
- - - Containing by weight more than 1 % of silicon
7201103000 80
- - Containing by weight not less than 0,1 % but less than 0,4 % of manganese
7201109000 80
- - Containing by weight less than 0,1 % of manganese
7201
Alloy pig iron; spiegeleisen
7202
Ferro-manganese
7202
Ferro-silicon
7202
Other
7202
Ferro-chromium
7202
Other
7202
Other
7202
Other
7204
Waste and scrap of alloy steel
7204
Other waste and scrap
7204410000 10
- Other waste and scrap
7204410000 80
- - Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles
7204411000 80
- - - Turnings, shavings, chips, milling waste, sawdust and filings
7204419100 10
- - - Trimmings and stampings
7204419100 80
- - - - In bundles
7204419900 80
- - - - Other
7204
Other
7205
Powders
7206
II. IRON AND NON-ALLOY STEEL
7207
Containing by weight less than 0,25 % of carbon
7207110000 10
- Containing by weight less than 0,25 % of carbon
7207110000 80
- - Of rectangular (including square) cross-section, the width measuring less than twice the thickness
7207111100 10
- - - Rolled or obtained by continuous casting
7207111100 80
- - - - Of free-cutting steel
7207111400 10
- - - - Other
7207111400 80
- - - - - Of a thickness not exceeding 130 mm
7207111600 80
- - - - - Of a thickness exceeding 130 mm
7207119000 80
- - - Forged
7207
Other, of rectangular (other than square) cross-section
7207
Other
7207
Containing by weight 0,25 % or more of carbon
7207200000 80
- Containing by weight 0,25 % or more of carbon
7207201100 10
- - Of rectangular (including square) cross-section, the width measuring less than twice the thickness
7207201100 20
- - - Rolled or obtained by continuous casting
7207201100 80
- - - - Of free-cutting steel
7207201500 10
- - - - Other, containing by weight
7207201500 80
- - - - - 0,25 % or more but less than 0,6 % of carbon
7207201700 80
- - - - - 0,6 % or more of carbon
7207201900 80
- - - Forged
7207203200 10
- - Other, of rectangular (other than square) cross-section
7207203200 80
- - - Rolled or obtained by continuous casting
7207203900 80
- - - Forged
7207205200 10
- - Of circular or polygonal cross-section
7207205200 80
- - - Rolled or obtained by continuous casting
7207205900 80
- - - Forged
7207208000 80
- - Other
7208
Other, in coils, not further worked than hot-rolled, pickled
7208
Other, in coils, not further worked than hot-rolled
7208
Other, not in coils, not further worked than hot-rolled
7208510000 10
- Other, not in coils, not further worked than hot-rolled
7208510000 80
- - Of a thickness exceeding 10 mm
7208512000 80
- - - Of a thickness exceeding 15 mm
7208519100 10
- - - Of a thickness exceeding 10 mm but not exceeding 15 mm, of a width of
7208519100 80
- - - - 2 050 mm or more
7208519800 80
- - - - Less than 2 050 mm
7208
Of a thickness of 4,75 mm or more but not exceeding 10 mm
7208
Of a thickness of 3 mm or more but less than 4,75 mm
7208
Other
7209
In coils, not further worked than cold-rolled (cold-reduced)
7209
Of a thickness exceeding 1 mm but less than 3 mm
7209
Of a thickness of 0,5 mm or more but not exceeding 1 mm
7209
Of a thickness of less than 0,5 mm
7209
Not in coils, not further worked than cold-rolled (cold-reduced)
7209
Of a thickness exceeding 1 mm but less than 3 mm
7209
Of a thickness of 0,5 mm or more but not exceeding 1 mm
7209
Of a thickness of less than 0,5 mm
7209
Other
7210
Plated or coated with tin
7210
Of a thickness of less than 0,5 mm
7210
Otherwise plated or coated with zinc
7210
Plated or coated with aluminium
7210
Painted, varnished or coated with plastics
7210
Other
7211
Not further worked than hot-rolled
7211
Not further worked than cold-rolled (cold-reduced)
7211230000 10
- Not further worked than cold-rolled (cold-reduced)
7211230000 80
- - Containing by weight less than 0,25 % of carbon
7211232000 80
- - - 'Electrical'
7211233000 10
- - - Other
7211233000 80
- - - - Of a thickness of 0,35 mm or more
7211238000 80
- - - - Of a thickness of less than 0,35 mm
7211
Other
7212
Plated or coated with tin
7212
Painted, varnished or coated with plastics
7212
Otherwise plated or coated
7212500000 80
- Otherwise plated or coated
7212502000 80
- - Plated or coated with chromium oxides or with chromium and chromium oxides
7212503000 80
- - Plated or coated with chromium or nickel
7212504000 80
- - Plated or coated with copper
7212506100 10
- - Plated or coated with aluminium
7212506100 80
- - - Plated or coated with aluminium-zinc alloys
7212506900 80
- - - Other
7212509000 80
- - Other
7213
Other
7213910000 10
- Other
7213910000 80
- - Of circular cross-section measuring less than 14 mm in diameter
7213911000 80
- - - Of a type used for concrete reinforcement
7213912000 80
- - - Of a type used for tyre cord
7213914100 10
- - - Other
7213914100 80
- - - - Containing by weight 0,06 % or less of carbon
7213914900 80
- - - - Containing by weight more than 0,06 % but less than 0,25 % of carbon
7213917000 80
- - - - Containing by weight 0,25 % or more but not more than 0,75 % of carbon
7213919000 80
- - - - Containing by weight more than 0,75 % of carbon
7213
Other
7214
Other
7214
Other
7214990000 80
- - Other
7214991000 10
- - - Containing by weight less than 0,25 % of carbon
7214991000 80
- - - - Of a type used for concrete reinforcement
7214993100 10
- - - - Other, of circular cross-section measuring in diameter
7214993100 80
- - - - - 80 mm or more
7214993900 80
- - - - - Less than 80 mm
7214995000 80
- - - - Other
7214997100 10
- - - Containing by weight 0,25 % or more of carbon
7214997100 20
- - - - Of a circular cross-section measuring in diameter
7214997100 80
- - - - - 80 mm or more
7214997900 80
- - - - - Less than 80 mm
7214999500 80
- - - - Other
7215
Other, not further worked than cold-formed or cold-finished
7216
L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm
7216
U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more
7216
I sections
7216
H sections
7216
L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more
7216
Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded
7216
Angles, shapes and sections, not further worked than cold-formed or cold-finished
7216
Other
7217
Not plated or coated, whether or not polished
7217100000 80
- Not plated or coated, whether or not polished
7217101000 10
- - Containing by weight less than 0,25 % of carbon
7217101000 80
- - - With a maximum cross-sectional dimension of less than 0,8 mm
7217103100 10
- - - With a maximum cross-sectional dimension of 0,8 mm or more
7217103100 80
- - - - Containing indentations, ribs, grooves or other deformations produced during the rolling process
7217103900 80
- - - - Other
7217105000 80
- - Containing by weight 0,25 % or more but less than 0,6 % of carbon
7217109000 80
- - Containing by weight 0,6 % or more of carbon
7217
Plated or coated with zinc
7217200000 80
- Plated or coated with zinc
7217201000 10
- - Containing by weight less than 0,25 % of carbon
7217201000 80
- - - With a maximum cross-sectional dimension of less than 0,8 mm
7217203000 80
- - - With a maximum cross-sectional dimension of 0,8 mm or more
7217205000 80
- - Containing by weight 0,25 % or more but less than 0,6 % of carbon
7217209000 80
- - Containing by weight 0,6 % or more of carbon
7217
Plated or coated with other base metals
7217300000 80
- Plated or coated with other base metals
7217304100 10
- - Containing by weight less than 0,25 % of carbon
7217304100 80
- - - Copper-coated
7217304900 80
- - - Other
7217305000 80
- - Containing by weight 0,25 % or more but less than 0,6 % of carbon
7217309000 80
- - Containing by weight 0,6 % or more of carbon
7217
Other
7218
III. STAINLESS STEEL
7218
Other
7218
Other
7219
Not further worked than hot-rolled, in coils
7219
Of a thickness of 4,75 mm or more but not exceeding 10 mm
7219
Of a thickness of 3 mm or more but less than 4,75 mm
7219
Of a thickness of less than 3 mm
7219
Not further worked than hot-rolled, not in coils
7219
Of a thickness of 4,75 mm or more but not exceeding 10 mm
7219
Not further worked than cold-rolled (cold-reduced)
7219
Of a thickness of 3 mm or more but less than 4,75 mm
7219
Of a thickness exceeding 1 mm but less than 3 mm
7219
Of a thickness of 0,5 mm or more but not exceeding 1 mm
7219
Of a thickness of less than 0,5 mm
7219
Other
7220
Not further worked than hot-rolled
7220
Not further worked than cold-rolled (cold-reduced)
7220200000 80
- Not further worked than cold-rolled (cold-reduced)
7220202100 10
- - Of a thickness of 3 mm or more, containing by weight
7220202100 80
- - - 2,5 % or more of nickel
7220202900 80
- - - Less than 2,5 % of nickel
7220204100 10
- - Of a thickness exceeding 0,35 mm but of less than 3 mm, containing by weight
7220204100 80
- - - 2,5 % or more of nickel
7220204900 80
- - - Less than 2,5 % of nickel
7220208100 10
- - Of a thickness not exceeding 0,35 mm, containing by weight
7220208100 80
- - - 2,5 % or more of nickel
7220208900 80
- - - Less than 2,5 % of nickel
7220
Other
7221
Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel
7222
Bars and rods, not further worked than hot-rolled, hot-drawn or extruded
7222110000 10
- Bars and rods, not further worked than hot-rolled, hot-drawn or extruded
7222110000 80
- - Of circular cross-section
7222111100 10
- - - Of a diameter of 80 mm or more, containing by weight
7222111100 80
- - - - 2,5 % or more of nickel
7222111900 80
- - - - Less than 2,5 % of nickel
7222118100 10
- - - Of a diameter of less than 80 mm, containing by weight
7222118100 80
- - - - 2,5 % or more of nickel
7222118900 80
- - - - Less than 2,5 % of nickel
7222
Other
7222
Bars and rods, not further worked than cold-formed or cold-finished
7222200000 80
- Bars and rods, not further worked than cold-formed or cold-finished
7222201100 10
- - Of circular cross-section
7222201100 20
- - - Of a diameter of 80 mm or more, containing by weight
7222201100 80
- - - - 2,5 % or more of nickel
7222201900 80
- - - - Less than 2,5 % of nickel
7222202100 10
- - - Of a diameter of 25 mm or more, but less than 80 mm, containing by weight
7222202100 80
- - - - 2,5 % or more of nickel
7222202900 80
- - - - Less than 2,5 % of nickel
7222203100 10
- - - Of a diameter of less than 25 mm, containing by weight
7222203100 80
- - - - 2,5 % or more of nickel
7222203900 80
- - - - Less than 2,5 % of nickel
7222208100 10
- - Other, containing by weight
7222208100 80
- - - 2,5 % or more of nickel
7222208900 80
- - - Less than 2,5 % of nickel
7222
Other bars and rods
7222
Angles, shapes and sections
7223
Wire of stainless steel
7223000000 80
Wire of stainless steel
7223001100 10
- Containing by weight 2,5 % or more of nickel
7223001100 80
- - Containing by weight 28 % or more but not more than 31 % of nickel and 20 % or more but not more than 22 % of chromium
7223001900 80
- - Other
7223009100 10
- Containing by weight less than 2,5 % of nickel
7223009100 80
- - Containing by weight 13 % or more but not more than 25 % of chromium and 3,5 % or more but not more than 6 % of aluminium
7223009900 80
- - Other
7224
IV. OTHER ALLOY STEEL; HOLLOW DRILL BARS AND RODS, OF ALLOY OR NON-ALLOY STEEL
7224
Ingots and other primary forms
7224
Other
7224900000 80
- Other
7224900200 80
- - Of tool steel
7224900300 10
- - Other
7224900300 20
- - - Of rectangular (including square) cross-section
7224900300 30
- - - - Hot-rolled or obtained by continuous casting
7224900300 40
- - - - - The width measuring less than twice the thickness
7224900300 80
- - - - - - Of high-speed steel
7224900500 80
- - - - - - Containing by weight not more than 0,7 % of carbon, 0,5 % or more but not more than 1,2 % of manganese and 0,6 % or more but not more than 2,3 % of silicon; containing by weight 0,0008 % or more of boron with any other element less than the minimum content referred to in note 1(f) to this chapter
7224900700 80
- - - - - - Other
7224901400 80
- - - - - Other
7224901800 80
- - - - Forged
7224903100 10
- - - Other
7224903100 20
- - - - Hot-rolled or obtained by continuous casting
7224903100 80
- - - - - Containing by weight not less than 0,9 % but not more than 1,15 % of carbon, not less than 0,5 % but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum
7224903800 80
- - - - - Other
7224909000 80
- - - - Forged
7225
Of silicon-electrical steel
7225
Other
7225
Other, not further worked than hot-rolled, in coils
7225
Other, not further worked than hot-rolled, not in coils
7225400000 80
- Other, not further worked than hot-rolled, not in coils
7225401200 80
- - Of tool steel
7225401500 80
- - Of high-speed steel
7225404000 10
- - Other
7225404000 80
- - - Of a thickness exceeding 10 mm
7225406000 80
- - - Of a thickness of 4,75 mm or more but not exceeding 10 mm
7225409000 80
- - - Of a thickness of less than 4,75 mm
7225
Other, not further worked than cold-rolled (cold-reduced)
7225
Other
7226
Of silicon-electrical steel
7226
Other
7226
Other
7226
Other
7227
Other
7227900000 80
- Other
7227901000 80
- - Containing by weight 0,0008 % or more of boron with any other element less than the minimum content referred to in note 1(f) to this chapter
7227905000 80
- - Containing by weight 0,9 % or more but not more than 1,15 % of carbon, 0,5 % or more but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum
7227909500 80
- - Other
7228
Bars and rods, of high-speed steel
7228
Bars and rods, of silico-manganese steel
7228200000 80
- Bars and rods, of silico-manganese steel
7228201000 80
- - Of rectangular (other than square) cross-section, hot-rolled on four faces
7228209100 10
- - Other
7228209100 80
- - - Not further worked than hot-rolled, hot-drawn or extruded; hot-rolled, hot-drawn or extruded, not further worked than clad
7228209900 80
- - - Other
7228
Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded
7228300000 80
- Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded
7228302000 80
- - Of tool steel
7228304100 10
- - Containing by weight 0,9 % or more but not more than 1,15 % of carbon, 0,5 % or more but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum
7228304100 80
- - - Of circular cross-section of a diameter of 80 mm or more
7228304900 80
- - - Other
7228306100 10
- - Other
7228306100 20
- - - Of circular cross-section, of a diameter of
7228306100 80
- - - - 80 mm or more
7228306900 80
- - - - Less than 80 mm
7228307000 80
- - - Of rectangular (other than square) cross-section, hot-rolled on four faces
7228308900 80
- - - Other
7228
Other bars and rods, not further worked than forged
7228
Other bars and rods, not further worked than cold-formed or cold-finished
7228500000 80
- Other bars and rods, not further worked than cold-formed or cold-finished
7228502000 80
- - Of tool steel
7228504000 80
- - Containing by weight 0,9 % or more but not more than 1,15 % of carbon, 0,5 % or more but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum
7228506100 10
- - Other
7228506100 20
- - - Of circular cross-section, of a diameter of
7228506100 80
- - - - 80 mm or more
7228506900 80
- - - - Less than 80 mm
7228508000 80
- - - Other