Import trade restrictions for 3921120000 80
| Origin Origin country | Start | Duty / Tax | Legal Legal base Measure type | |
|---|---|---|---|---|
1011 | ERGA OMNES 1011 | 01-01-2010 | Regulation 1005/09 Import prohibition 277 | |
1011 | ERGA OMNES 1011 | 01-01-2010 | Regulation 1005/09 Restriction on entry into free circulation 475 | |
2020 | GSP (R 12/978) - General arrangements 2020 | 01-01-2015 | 0.000 % | Regulation 0978/12 Tariff preference 142 |
UA | Ukraine UA | 01-01-2016 | 0.000 % | Decision 0295/14 Tariff preference 142 |
Explanation of trade restrictions
Erga Omnes means "for all".
Third countries are countries that are not part of the EU.
GSP means "Generalised System of Preferences".
GSP Plus means "Generalised System of Preferences Plus".
European Economic Area (EEA) means all EU member states and Iceland, Liechtenstein and Norway.
OCTs stands for "Overseas Countries and Territories". They are countries and territories that are not part of the EU. More information
CARIFORUM is a regional economic integration organisation comprising 15 Caribbean Community (CARICOM) countries and the Dominican Republic.
SADC EPA stands for "Southern African Development Community - Economic Partnership Agreement".
Duty means "customs duties".
History
Duty rates and measures for this code over time (yearly snapshots).
Information
When importing or exporting "Of polymers of vinyl chloride", it is crucial to have the correct HS code or TARIC code. The HS code 3921120000 80 serves as the standard code for this product, ensuring that the appropriate duties and taxes are applied when crossing international borders.
To ensure your business transactions run smoothly when importing or exporting "Of polymers of vinyl chloride", consider the following points:
- Inform yourself about the specific import and export regulations in the countries involved. This includes possible restrictions, taxes, and duties applicable to "Of polymers of vinyl chloride".
- Check if any additional licenses, permits, or certificates are required to import "Of polymers of vinyl chloride" into the destination country or export it from the country of origin.
- Make sure your trading partners have valid identification numbers, such as EORI numbers (Economic Operators Registration and Identification) in the EU, to streamline trade and minimize delays.
- Ensure that all trade- and customs-related documents (such as commercial invoices, packing lists, certificates of origin, and insurance policies) are accurately completed and adhere to the respective national regulations.
- Keep an eye on the current exchange rates, as well as packaging, shipping, and insurance costs, to accurately calculate trade costs.
In summary, the HS code or TARIC code for "Of polymers of vinyl chloride" is 3921120000 80. Make sure you accurately use this code in all your trade and customs documents to guarantee smooth and hassle-free transactions. With these tips, you'll be better prepared for the challenges of international trade and can successfully import and export "Of polymers of vinyl chloride".
HS Code structure
1. Chapter
There are 21 different sections, which are divided into 96 chapters. Exceptional chapters include chapter 77, which is reserved for future use, chapters 98 and 99, which are limited at national level, and chapter 99, which is a specific code for temporary changes. In the example above, chapter 39 was selected for plastics and articles thereof
2. Heading
The heading determines the specific category within a certain chapter. In the example above, the 21 refers to Other plates, sheets, film, foil and strip, of plastics.
3. Subheading
The last two digits of the international harmonized code are more specific and define subcategories of products. In the example above, the 12 refers to Of polymers of vinyl chloride.
HS Code tree structure
3900000000 80
Chapter PLASTICS AND ARTICLES THEREOF
3921000000 80
Other plates, sheets, film, foil and strip, of plastics
3921110000 10
- Cellular
3921110000 80
- - Of polymers of styrene
3921110010 80
- - - Acrylonitrile butadiene styrene, for use in certain types of aircraft
3921110090 80
- - - Other
3921120000 80
- - Of polymers of vinyl chloride
3921120020 80
- - - For use in certain types of aircraft
3921120090 80
- - - Other
3921130000 80
- - Of polyurethanes
3921131000 80
- - - Flexible
3921131010 80
- - - - Sheet of polyurethane foam, of a thickness of 3 mm (± 15 %) and of a specific gravity of 0,09435 or more but not more than 0,10092
3921131020 80
- - - - Rolls of open-cell polyurethane foam: - with a thickness of 2,29 mm (± 0,25 mm), - surface-treated with a foraminous adhesion promoter, and - laminated to a polyester film and a layer of textile material
3921131090 80
- - - - Other
3921139000 80
- - - Other
3921140000 80
- - Of regenerated cellulose
3921140020 80
- - - Cellular block of regenerated cellulose, impregnated with water containing magnesium chloride and quaternary ammonium compounds, measuring 100 cm (± 10 cm) × 100 cm (± 10 cm) × 40 cm (± 5 cm)
3921140080 80
- - - Other
3921190000 80
- - Of other plastics
3921190010 80
- - - For use in certain types of aircraft
3921190030 10
- - - Other
3921190030 80
- - - - Blocks with cellular structure, containing by weight: - polyamide-6 or poly(epoxy anhydride) - 7 % or more but not more than 9 % of polytetrafluorethylene if present - 10 % or more but not more than 25 % of inorganic fillers
3921190040 80
- - - - Transparent, microporous, acrylic acid grafted polyethylene film, in the form of rolls, with: - a width of 98 mm or more but not more than170 mm, - a thickness of 15 µm or more but not more than 36 µm, of a kind used for the manufacture of alkaline battery separators
3921190091 80
- - - - Microporous polypropylene film of a thickness of not more than 100 µm
3921190093 80
- - - - Strip of microporous polytetrafluoroethylene on a support of a non-woven, for use in the manufacture of filters for kidney dialysis equipment
3921190095 80
- - - - Film of polyethersulfone, of a thickness of not more than 200 µm
3921190096 80
- - - - Cellular film, consisting of a layer of polyethylene of a thickness of 90 µm or more but not more than 140 µm and a layer of regenerated cellulose of a thickness of 10 µm or more but not more than 40 µm
3921190099 80
- - - - Other
3921900000 80
- Other
3921901000 10
- - Of condensation or rearrangement polymerisation products, whether or not chemically modified
3921901000 80
- - - Of polyesters
3921901005 80
- - - - Corrugated sheet and plates
3921901010 80
- - - - Composite plate of poly(ethylene terephthalate) or of poly(butylene terephthalate), reinforced with glass fibres
3921901020 80
- - - - Poly(ethylene terephthalate) film, laminated on one side or on both sides with a layer of unidirectional nonwoven poly(ethylene terephthalate) and impregnated with polyurethane or epoxide resin
3921901030 80
- - - - Multilayer film consisting of: - a poly(ethylene terephthalate) film with a thickness of more than 100 µm but not more than 150 µm, - a primer of phenolic material with a thickness of more than 8 µm but not more than 15 µm, - an adhesive layer of a synthetic rubber with a thickness of more than 20 µm but not more than 30 µm, - and a transparent poly(ethylene terephthalate) liner with a thickness of more than 35 µm but not more than 40 µm
3921901090 80
- - - - Other
3921903000 80
- - - Of phenolic resins
3921904100 10
- - - Of amino-resins
3921904100 20
- - - - Laminated
3921904100 80
- - - - - High-pressure laminates with a decorative surface on one or both sides
3921904300 80
- - - - - Other
3921904900 80
- - - - Other
3921905500 80
- - - Other
3921905520 80
- - - - Pre-impregnated reinforced fibreglass containing cyanate ester resin or bismaleimide (B) triazine (T) resin mixed with epoxide resin, measuring: - 469,9 mm (± 2 mm) !x! 622,3 mm (± 2 mm), or - 469,9 mm (± 2 mm) !x! 414,2 mm (± 2 mm), or - 546,1 mm (± 2 mm) !x! 622,3 mm (± 2 mm for use in the manufacture of printed circuit boards
3921905525 80
- - - - Prepreg sheets or rolls containing polyimide resin
3921905540 80
- - - - Three layered fabric sheet, in rolls, - comprising a core layer of 100 % Nylon Taffeta or Nylon/Polyester blended Taffeta, - coated on both sides with polyamide , - of a total thickness not more than 135 μm, - of a total weight not more than 80 g/m$2
3921905550 80
- - - - Glass fiber-reinforced sheets of reactive, halogen-free epoxid resin with hardener, additives and inorganic fillers for use in encapsulating semiconductor systems
3921905590 80
- - - - Other
3921906000 80
- - Of addition polymerisation products
3921906010 80
- - - For use in certain types of aircraft
3921906030 10
- - - Other
3921906030 80
- - - - Heat-, infra- and UV insulating poly(vinyl butyral) film: - laminated with a metal layer with a thickness of 0,05 mm(±0,01 mm), - containing by weight 29,75 % or more but not more than 40,25 % of triethyleneglycol di (2-ethyl hexanoate) as plasticizer, - with a light transmission of 70 % or more (as determined by the ISO 9050 standard); - with an UV transmission of 1 % or less (as determined by the ISO 9050 standard); - with a total thickness of 0,43 mm (± 0,043 mm)
3921906091 80
- - - - Woven polytetrafluoroethylene fabric, coated or covered with a copolymer of tetrafluoroethylene and trifluoroethylene having perfluorinated alkoxy side-chains ending in carboxylic acid or sulphonic acid groups, whether or not in the potassium or sodium salt form
3921906093 80
- - - - Film, of a specular gloss of 30 or more but not more than 60 measured at an angle of 60 ° using a glossmeter (as determined by the ISO 2813:2000 method), consisting of a layer of poly(ethylene terephthalate) and a layer of coloured poly(vinyl chloride), joined by a metallised adhesive coating, for coating panels and doors of a kind used in the manufacture of domestic appliances
3921906095 80
- - - - Printed laminated sheet - with a core layer of glass fabric, coated on each side with a layer of poly(vinyl chloride), - on one side covered with a layer of poly(vinyl fluoride), - whether or not with a pressure sensitive adhesive layer and a release film on the other side, - with a toxicity (as determined by test method ABD 0031) of not more than 50 ppm hydrogen fluoride, not more than 85 ppm hydrogen chloride, not more than 10 ppm hydrogen cyanide, not more than 10 ppm nitrogen oxides, not more than 300 ppm carbon monoxide and not more than 10 ppm dihydrogen sulphide and sulphur dioxide taken together, - with a flammability within 60 seconds of not more than 110 mm (as determined by test method FAR 25 App.F Pt. I Amdt.83), and - with a weight (without release film) of 490 g/m$2 (± 45 g/m$2) without adhesive layer or of 580 g/m$2 (± 50 g/m$2) with pressure sensitive layer
3921906099 80
- - - - Other
3921909000 80
- - Other
3921909010 80
- - - Roll of polymer-metal laminate comprising: - a layer of poly(ethylene terephthalate), - a layer of aluminium, - a layer of polypropylene, - with a width of not more than 275 mm, - a total thickness of not more than 165 μm, and - conforming to ASTM D1701-91 and ASTM D882-95A for use in the manufacture of lithium-ion electric vehicle batteries
3921909090 80
- - - Other