Tariff number 3824990000 80 - Other

Estimate the import cost for 382499

An estimate only. The customs value is the price including transport and insurance to the EU border. Excise duties, other fees and producer-specific anti-dumping rates are not included. Preferential rates need valid proof of origin. Country groups and exclusions: TARIC, as of November 2026.

Export measures for 3824990000

What applies when these goods leave the EU: export controls, dual-use and other authorisations, bans per destination and the supplementary unit of the export declaration.

Controls and documents 5

	Destination	Start	Duty / Tax	Legal base Measure type
BY	Belarus BY	25-02-2025	Document required banned without it Details	Regulation0765/06 Export control 766
UA	Ukraine UA	25-02-2025	Document required banned without it Details	Regulation0692/14 Export control 709
UA	Ukraine UA	25-08-2022	Document required banned without it Details	Regulation0263/22 Export control 767
RU	Russian Federation RU	26-06-2024	Document required banned without it Details	Regulation0833/14 Export control 709
IR	Iran, Islamic Republic of IR	30-09-2025	Document required banned without it Details	Regulation0267/12 Export control 768

History

Preferential rules of origin for 3824990000

What the goods must meet to count as originating in a partner country and get the preferential duty, per agreement.

• EU-Algeria Association Agreement · Algeria

  EU-Lebanon Association Agreement · Lebanon

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included:

  – The following of this heading: – – Prepared binders for foundry moulds or cores based on natural resinous products – – Naphthenic acids, their water-insoluble salts and their esters – – Sorbitol other than that of heading 2905 – – Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts – – Ion exchangers – – Getters for vacuum tubes – – Alkaline iron oxide for the purification of gas – – Ammoniacal gas liquors and spent oxide produced in coal gas purification – – Sulphonaphthenic acids, their water-insoluble salts and their esters – – Fusel oil and Dippel's oil – – Mixtures of salts having different anions – – Copying pastes with a basis of gelatin, whether or not on a paper or textile backing / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

  – Other / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

• EU-Egypt Association Agreement · Egypt

  EU-Morocco Association Agreement · Morocco

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included:

  – The following of this heading:

  – – Prepared binders for foundry moulds or cores based on natural resinous products – – Naphthenic acids, their water-insoluble salts and their esters – – Sorbitol other than that of heading 2905 – – Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts – – Ion exchangers – – Getters for vacuum tubes – – Alkaline iron oxide for the purification of gas – – Ammoniacal gas liquors and spent oxide produced in coal gas purification – – Sulphonaphthenic acids, their water-insoluble salts and their esters – – Fusel oil and Dippel's oil – – Mixtures of salts having different anions – – Copying pastes with a basis of gelatin, whether or not on a paper or textile backing / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

• EU-Georgia DCFTA · Georgia

  EU-Moldova DCFTA · Moldova

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included: The following of this heading: Prepared binders for foundry moulds or cores based on natural resinous products Naphthenic acids, their water-insoluble salts and their esters Sorbitol other than that of heading 2905 / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts Ion exchangers Getters for vacuum tubes Alkaline iron oxide for the purification of gas Ammoniacal gas liquors and spent oxide produced in coal gas purification Sulphonaphthenic acids, their water-insoluble salts and their esters Fusel oil and Dippel's oil Mixtures of salts having different anions Copying pastes with a basis of gelatin, whether or not on a paper or textile backing

• Autonomous Trade Preferences (Western Balkans) · Kosovo

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included:

  The following of this heading:

  - - / or: Prepared binders for foundry moulds or cores based on natural resinous products - - / or: Naphthenic acids, their water-insoluble salts and their esters - - / or: Sorbitol other than that of heading 2905 - - / or: Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts - - / or: Ion exchangers - - / or: Getters for vacuum tubes - - / or: Alkaline iron oxide for the purification of gas - - / or: Ammoniacal gas liquors and spent oxide produced in coal gas purification - - / or: Sulphonaphthenic acids, their water-insoluble salts and their esters - - / or: Fusel oil and Dippel's oil - - / or: Mixtures of salts having different anions - - / or: Copying pastes with a basis of gelatin, whether or not on a paper or textile backing / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

• EU-Chile Association Agreement · Chile

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included: — The following of this heading: — — Prepared binders for foundry moulds or cores based on natural resinous products — — Naphthenic acids, their water-insoluble salts and their esters — — Sorbitol other than that of heading 2905 — — Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts — — Ion exchangers — — Getters for vacuum tubes — — Alkaline iron oxide for the purification of gas — — Ammoniacal gas liquors and spent oxide produced in coal gas purification — — Sulphonaphthenic acids, their water-insoluble salts and their esters — — Fusel oil and Dippel's oil — — Mixtures of salts having different anions — — Copying pastes with a basis of gelatin, whether or not on a paper or textile backing / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product — Other / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

• EU-Colombia/Peru/Ecuador Trade Agreement · Colombia, Ecuador, Peru

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included:

  – The following of this heading: – – Prepared binders for foundry moulds or cores based on natural resinous products – – Naphthenic acids, their water-insoluble salts and their esters – – Sorbitol other than that of heading 2905 / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 per cent of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

  – – Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts – – Ion exchangers – – Getters for vacuum tubes

  – – Alkaline iron oxide for the purification of gas – – Ammoniacal gas liquors and spent oxide produced in coal gas purification – – Sulphonaphthenic acids, their water-insoluble salts and their esters – – Fusel oil and Dippel's oil – – Mixtures of salts having different anions

  – – Copying pastes with a basis of gelatin, whether or not on a paper or textile backing

  Biodiesel: mixtures of mono alkyl esters of the fatty acids of the long chain of sub products of vegetable and animal oils. For greater certainty, the mono alkyl ester makes reference to methyl ester or ethyl ester of fatty acids / or: Manufacture from materials of any heading, except that of the product, and in which all the materials of Chapter 15 used are wholly obtained [20]

  Other / or: Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product [20] See Note 4 of Appendix 2 A.

• EEA/EFTA agreements (Switzerland, Norway, Liechtenstein, Faroe Islands) · Faroe Islands, Liechtenstein, Norway, Switzerland

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included:

  The following of this heading: – – Prepared binders for foundry moulds or cores based on natural resinous products – – Naphthenic acids, their water-insoluble salts and their esters – – Sorbitol other than that of heading 2905 / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

  – – Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts – – Ion exchangers – – Getters for vacuum tubes

  – – Alkaline iron oxide for the purification of gas – – Ammoniacal gas liquors and spent oxide produced in coal gas purification – – Sulphonaphthenic acids, their water-insoluble salts and their esters – – Fusel oil and Dippel’s oil – – Mixtures of salts having different anions – – Copying pastes with a basis of gelatin, whether or not on a paper or textile backing

• EPA CARIFORUM

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included; residual products of the chemical or allied industries, not elsewhere specified or included: – The following of this heading Prepared binders for foundry moulds or cores based on natural resinous products Naphthenic acids, their water insoluble salts and their esters Sorbitol other than that of heading No 2905 / or: Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts Ion exchangers Getters for vacuum tubes Alkaline iron oxide for the purification of gas Ammoniacal gas liquors and spent oxide produced in coal gas purification Sulphonaphthenic acids, their water insoluble salts and their esters Fusel oil and Dippel's oil Mixtures of salts having different anions Copying pastes with a basis of gelatin, whether or not on a paper or textile backing – Other / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

• EPA Eastern and Southern Africa

  – The following of this heading: Prepared binders for foundry moulds or cores based on natural resinous products Naphthenic acids, their water insoluble salts and their esters Sorbitol other than that of heading No 2905 / or: Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

  Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts Ion exchangers Getters for vacuum tubes

  Alkaline iron oxide for the purification of gas Ammoniacal gas liquors and spent oxide produced in coal gas purification Sulphonaphthenic acids, their water insoluble salts and their esters Fusel oil and Dippel’s oil Mixtures of salts having different anions Copying pastes with a basis of gelatin, whether or not on a paper or textile backing

• EU Market Access Regulation (EPA) · Cameroon, Côte d’Ivoire, Ghana, Kenya

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included; residual products of the chemical or allied industries, not elsewhere specified or included:

  – The following of this heading: – – Prepared binders for foundry moulds or cores based on natural resinous products – – Naphthenic acids, their water insoluble salts and their esters – – Sorbitol other than that of heading No 2905 – – Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamine's; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts – – Ion exchangers – – Getters for vacuum tubes – – Alkaline iron oxide for the purification of gas – – Ammoniacal gas liquors and spent oxide produced in coal gas purification – – Sulphonaphthenic acids, their water insoluble salts and their esters – – Fusel oil and Dippel's oil – – Mixtures of salts having different anions – – Copying pastes with a basis of gelatine, whether or not on a paper or textile backing / or: Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

  – Other / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

• EPA Pacific · Fiji, Papua New Guinea, Samoa, Solomon Islands

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included; residual products of the chemical or allied industries, not elsewhere specified or included: – The following of this heading: Prepared binders for foundry moulds or cores based on natural resinous products Naphthenic acids, their water insoluble salts and their esters Sorbitol other than that of heading No 2905 / or: Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts Ion exchangers Getters for vacuum tubes Alkaline iron oxide for the purification of gas Ammoniacal gas liquors and spent oxide produced in coal gas purification Sulphonaphthenic acids, their water insoluble salts and their esters Fusel oil and Dippel's oil Mixtures of salts having different anions Copying pastes with a basis of gelatin, whether or not on a paper or textile backing

• Generalised Scheme of Preferences (GSP, GSP+, EBA) · Armenia, India, Kenya, Pakistan, Samoa, Solomon Islands, Syria, Vietnam

  Miscellaneous chemical products; except for: / or: (a) LDCs Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product / or: (b) Other beneficiary countries Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

• EU-Iceland FTA · Iceland

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included:

  – The following of this heading: – – Prepared binders for foundry moulds or cores based on natural resinous products – – Naphthenic acids, their water-insoluble salts and their esters – – Sorbitol other than that of heading 2905 – – Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts – – Ion exchangers – – Getters for vacuum tubes – – Alkaline iron oxide for the purification of gas – – Ammoniacal gas liquors and spent oxide produced in coal gas purification – – Sulphonaphthenic acids, their water-insoluble salts and their esters – – Fusel oil and Dippel's oil – – Mixtures of salts having different anions – – Copying pastes with a basis of gelatin, whether or not on a paper or textile backing / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

• EU-Jordan Association Agreement · Jordan

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included: - The following of this heading: - - Prepared binders for foundry moulds or cores based on natural resinous products - - Naphthenic acids, their water-insoluble salts and their esters - - Sorbitol other than that of heading 2905 / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product - - Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts - - Ion exchangers - - Getters for vacuum tubes - - Alkaline iron oxide for the purification of gas - - Ammoniacal gas liquors and spent oxide produced in coal gas purification - - Sulphonaphthenic acids, their water-insoluble salts and their esters - - Fusel oil and Dippel's oil - - Mixtures of salts having different anions - - Copying pastes with a basis of gelatin, whether or not on a paper or textile backing - Other / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

• EU-Jordan Association Agreement (relaxed rules, 2016) · Jordan

  Miscellaneous chemical products; except for: / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product

• EU-Korea FTA · South Korea

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the products

• EU-Central America Association Agreement

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included:

  — The following of this heading: – – Prepared binders for foundry moulds or cores based on natural resinous products – – Naphthenic acids, their water-insoluble salts and their esters – – Sorbitol other than that of heading 2905 – – Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts – – Ion exchangers – – Getters for vacuum tubes – – Alkaline iron oxide for the purification of gas – – Ammoniacal gas liquors and spent oxide produced in coal gas purification – – Sulphonaphthenic acids, their water-insoluble salts and their esters – – Fusel oil and Dippel's oil – – Mixtures of salts having different anions – – Copying pastes with a basis of gelatin, whether or not on a paper or textile backing / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

• EU-Mexico Global Agreement · Mexico

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included; residual products of the chemical or allied industries; not elsewhere specified or included: The following of this heading: Prepared binders for foundry moulds or cores based on natural resinous products Naphthenic acids, their water insoluble salts and their esters Sorbitol other than that of heading No 2905 Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts Ion exchangers Getters for vacuum tubes Alkaline iron oxide for the purifcation of gas Ammoniacal gas liquors and spent oxide produced in coal gas purification Sulphonaphthenic acids, their water insoluble salts and their esters Fusel oil and Dippel's oil Mixtures of salts having different anions Copying pastes with a basis of gelatin, whether or not on a paper or textile backing / or: Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product — Other / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

• Pan-Euro-Mediterranean (PEM) Convention · Albania, Andorra, Bosnia & Herzegovina, Egypt, Faroe Islands, Iceland, Kosovo, Liechtenstein, Montenegro, North Macedonia, Norway, Palestine, Switzerland, Türkiye

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included:

  – The following of this heading: / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

  – – Prepared binders for foundry moulds or cores based on natural resinous products

  – – Naphthenic acids, their water-insoluble salts and their esters

  – – Sorbitol other than that of heading 2905

  – – Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts

  – – Ion exchangers

  – – Getters for vacuum tubes

  – – Alkaline iron oxide for the purification of gas

• EU-Palestine Interim Association Agreement · Palestine

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included; residual products of the chemical or allied industries, not elsewhere specified or included: - The following of this heading: Prepared binders for foundry moulds or cores based on natural resinous products Naphthenic acids, their water insoluble salts and their esters Sorbitol other than that of heading No 2905 / or: Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20% of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts Ion exchangers Getters for vacuum tubes Alkaline iron oxide for the purification of gas Ammoniacal gas liquors and spent oxide produced in coal gas purification Sulphonaphthenic acids, their water insoluble salts and their esters Fusel oil and Dippel's oil Mixtures of salts having different anions Copying pastes with a basis of gelatin, whether or not on a paper or textile backing - Other / or: Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product

• EU-Singapore FTA · Singapore

  Miscellaneous chemical products; except for: / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

• EU-Tunisia Association Agreement · Tunisia

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included: The following of this heading: Prepared binders for foundry moulds or cores based on natural resinous products Naphthenic acids, their water-insoluble salts and their esters Sorbitol other than that of heading 2905 Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts Ion exchangers Getters for vacuum tubes Alkaline iron oxide for the purification of gas Ammoniacal gas liquors and spent oxide produced in coal gas purification Sulphonaphthenic acids, their water-insoluble salts and their esters Fusel oil and Dippel's oil Mixtures of salts having different anions Copying pastes with a basis of gelatin, whether or not on a paper or textile backing / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

• EU-Ukraine DCFTA · Ukraine

  Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included:

  – The following of this heading: – – Prepared binders for foundry moulds or cores based on natural resinous products – – Naphthenic acids, their water-insoluble salts and their esters – – Sorbitol other than that of heading 2905 / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

  – – Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts – – Ion exchangers – – Getters for vacuum tubes

  – – Alkaline iron oxide for the purification of gas – – Ammoniacal gas liquors and spent oxide produced in coal gas purification – – Sulphonaphthenic acids, their water-insoluble salts and their esters – – Fusel oil and Dippel's oil – – Mixtures of salts having different anions – – Copying pastes with a basis of gelatin, whether or not on a paper or textile backing

Source: European Commission, Access2Markets (CC BY 4.0, shortened). The text of the agreement prevails. Access2Markets

Legal and explanatory notes for 3824990000

Sources: Combined Nomenclature 2026, Annex I to Regulation (EEC) No 2658/87 (CELEX 32025R1926), and the Explanatory Notes to the Combined Nomenclature (CELEX 02019XC0329(02)-20260213). The section and chapter notes are legally binding; the explanatory notes are guidance. EUR-Lex

EU classification regulations for 3824990000

Commission regulations that classified specific goods under this code. They bind customs in every member state for identical goods.

• 3824 99 92 Jul 31, 2024 · Regulation on EUR-Lex
  The product is a liquid mixture of chemicals consisting by weight of the following:

  — 63 % of tetrahydro-1,1,2,3,3-pentamethylindane (THPMI; CAS RN 33704-59-5); and — 34 % of hexahydro-1,1,2,3,3-pentamethylindane (HHPMI; CAS RN 33704-60-8); and — 3 % of 1,1,2,3,3-pentamethylindane (PMI; CAS RN 1203-17-4). The mixture is obtained by catalytic hydrogenation of PMI (starting material). The products formed during the chemical reaction are THPMI (main product) and HHPMI (by-product). The mixture is intended for direct use, without any purification, in the production of (rac)-6,7-Dihydro-1,1,2,3,3-pentamethyl-4(5H)-indanone (DPMI; CAS RN 33704-61-9) through allylic oxidation of THPMI.

  Reasons

  Classification is determined by general rules 1 and 6 for the interpretation of the Combined Nomenclature, Note 1(a) to Chapter 29 and the wording of CN codes 3824 , 3824 99 and 3824 99 92 . Due to the significant concentration of HHPMI, the product is a mixture that cannot be considered as a separate chemically defined organic compound consisting of one molecular species within the meaning of Note 1(a) to Chapter 29 (see the Harmonized System Explanatory Notes to Chapter 29, General, point (A), first paragraph). The mixture is therefore excluded from classification in Chapter 29. Consequently, the mixture is to be classified under CN code 3824 99 92 as other preparations of the chemical or allied industries, not elsewhere specified or included.

• 3824 99 96 Jan 15, 2024 · Regulation on EUR-Lex
  Preparation consisting of 17 % by weight of the polycyclic peptide nisin mixed with 83 % by weight of sodium chloride.

  Sodium chloride is first added during a purification step in the production of nisin. In a subsequent step, further sodium chloride is added solely to standardise the preparation to a defined antibiotic activity. The preparation is used as a food additive to prevent bacterial growth.

  Reasons

  Classification is determined by general rules 1 and 6 for the interpretation of the Combined Nomenclature, Note 1 to Chapter 29 and the wording of CN codes 3824 , 3824 99 and 3824 99 96 . The sodium chloride contained in the preparation is added for standardisation and not nutritional purposes. The preparation is used as a technical food additive and is not considered as a mixture of chemicals with foodstuffs or other substances with nutritive value within the meaning of Note 1(b) to Chapter 38. Therefore, classification as a food preparation of heading 2106 is excluded (see the Harmonised System Explanatory Note (HSEN) to Chapter 38, General, fifth paragraph). Classification in Chapter 29 is excluded as sodium chloride has been deliberately added to render the preparation particularly suitable for specific use as a food additive with defined antibiotic activity. Moreover, sodium chloride is not an impurity resulting from the manufacturing process (see Note 1(a) to Chapter 29 and the HSEN to Chapter 29, General, point (A), second and fifth paragraphs). Consequently, the preparation is to be classified under CN code 3824 99 96 as other preparations of the chemical or allied industries, not elsewhere specified or included (see also by analogy the Harmonized System classification opinion 3824.99/3).

UK advance tariff rulings for 3824990000

Rulings of HM Revenue & Customs for goods with UK commodity codes that start like this EU code. The UK tariff differs from the EU tariff, so these rulings are guidance for the EU.

• UK 3824996400 Valid Feb 5, 2025 to Feb 4, 2028 · Ruling 600012290 on GOV.UK

  A powder blend consisting of maltodextrin, gum acacia and guar gum, used as an excipient in the formulation and manufacture of solid oral dose tablets. Supplied in bulk packaging. Packaging consists of polyethylene resin bag placed inside a protective outer container, typically a cardboard box.

  Justification

  Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) Classification has been determined in accordance with the following: General Interpretative Rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 3824: Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included GIR 6 has been used to classify this product by the terms of heading 382499: Other than elsewhere specified within this heading. 8 Digit code 38249964: Products and preparations for pharmaceutical or surgical uses not elsewhere specified or included Also …

• UK 3824996400 Valid Jun 2, 2025 to Jun 1, 2028 · Ruling 600013269 on GOV.UK

  Excipient blend. The product is a blend of excipients used by pharmaceutical and dietary supplement companies in the formation and manufacture of oral dose tablet cores. There is also an identical product (Placebo DT1) which has the exact composition and is used internally within the company to make placebo tablets for coating trials on medicaments and supplement tablets. The composition of both products are :- Emcocel 90m nf/ep/jp, Lactose monohyd. nf/ep/jp/cp, Starch 1500 partially pregelatinized maize starch, Purified stearic acid (veg.) pwdr, Cabosil m-5p (col.silicon diox.) nf/ep/jp/cp. The materials are blended together in a main manufacturing facility under Good Manufacturing Practice (GMP) conditions in accordance with the prescribed work instructions. The finished product is bulk packaging in a free-flowing powder form. Packaging consists of a polyethylene resin bag placed inside a protective outer container, typically a cardboard box. This product is not considered a medicament of heading 3003 or 3004

  Justification

  Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules GIR’s: GIR 1 has been used to classify this product by the terms of heading 3824: Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included. GIR 5b has been used to identify the type of packaging – Packaging consists of polyethylene resin bag placed inside a protective outer container, typically a cardboard box. GIR 6 has been used to classify this product by the terms of heading 382499: Other than elsewhere specified within this heading. 8-Digit code 38249964: Products and …

• UK 3824996500 Valid Jul 3, 2024 to Jul 2, 2027 · Ruling 600010485 on GOV.UK

  A reddish coloured, powdered sand additive used in the cold box core process to eliminate veining defects in metal castings. The product is added to dry sand prior to the addition of resin. The material is supplied in 25kg bags, 500kg bags, 750kg bags and 1000kg bags.

  Justification

  Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3(1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect - a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 3824 - prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included. GIR 5(b) has been used to identify the type of packaging: supplied in 25kg bags, 500kg bags, 750kg bags and 1000kg bags. GIR 6 has been used to classify the goods to subheading level - 382499 - other than elsewhere specified. 8 Digit Code: 38249965 – other than elsewhere specified or included. Also classified in accordance with HSENS to …

Source: HM Revenue & Customs, Advance Tariff Rulings. Contains public sector information licensed under the Open Government Licence v3.0.

Restrictions and flags for 382499

• Russia sanctions: import ban Regulation (EU) No 833/2014, Annex XXI 3824

  Art. 3i, goods generating significant revenue for Russia

  Read the act on EUR-Lex
• Russia sanctions: export ban Regulation (EU) No 833/2014, Annex XXIII 3824

  Art. 3k, goods contributing to Russian industrial capacity

  Read the act on EUR-Lex
• EUDR: deforestation-free products Regulation (EU) 2023/1115, Annex I 382499

  Commodity: oil palm. only oil palm of Elaeis spp.. only part of the code: Other chemical products and preparations of the chemical or allied industries (including those consisting of.... applies from 30 December 2027

  Read the act on EUR-Lex
• Dual-use goods Regulation (EU) 2021/821, Annex I 38249915

  Covers only part of the goods under this code (act names 38249915).

  May be dual-use; check the Annex I entry 0B001f, 1C450 b1 (correlation table is non-binding)

  Read the act on EUR-Lex
• Dual-use goods Regulation (EU) 2021/821, Annex I 38249950

  Covers only part of the goods under this code (act names 38249950).

  May be dual-use; check the Annex I entry 1C350 14, 1C350 24, 1C350 40, 1C350 41, 1C450 b1 (correlation table is non-binding)

  Read the act on EUR-Lex
• Dual-use goods Regulation (EU) 2021/821, Annex I 38249955

  Covers only part of the goods under this code (act names 38249955).

  May be dual-use; check the Annex I entry 1C450 b1 (correlation table is non-binding)

  Read the act on EUR-Lex
• Dual-use goods Regulation (EU) 2021/821, Annex I 38249986

  Covers only part of the goods under this code (act names 38249986).

  May be dual-use; check the Annex I entry 1C350 3, 1C450 b1 (correlation table is non-binding)

  Read the act on EUR-Lex
• Dual-use goods Regulation (EU) 2021/821, Annex I 38249992

  Covers only part of the goods under this code (act names 38249992).

  May be dual-use; check the Annex I entry 1C111, 1C233, 8C001, 1C350 1, 1C350 2, 1C350 3, 1C350 4, 1C350 5, 1C350 6, 1C350 7, 1C350 8, 1C350 9, 1C350 10, 1C350 11, 1C350 12, 1C350 13, 1C350 14, 1C350 15, 1C350 16, 1C350 17, 1C350 18, 1C350 19, 1C350 20, 1C350 21, 1C350 22, 1C350 23, 1C350 24, 1C350 25, 1C350 26, 1C350 27, 1C350 28, 1C350 29, 1C350 30, 1C350 31, 1C350 32, 1C350 33, 1C350 34, 1C350 35, 1C350 36, 1C350 37, 1C350 38, 1C350 39, 1C350 40, 1C350 41, 1C350 42, 1C350 43, 1C350 44, 1C350 45, 1C350 46, 1C350 47, 1C350 48, 1C350 49, 1C350 50, 1C350 51, 1C350 52, 1C350 53, 1C350 54, 1C450 b1, 1C350 55, 1C350 56, 1C350 57, 1C350 58, 1C350 59, 1C350 60, 1C350 61, 1C350 62, 1C350 63 (correlation table is non-binding)

  Read the act on EUR-Lex
• Dual-use goods Regulation (EU) 2021/821, Annex I 38249993

  Covers only part of the goods under this code (act names 38249993).

  May be dual-use; check the Annex I entry 1C107, 1C111, 1C233, 8C001, 1C350 1, 1C350 2, 1C350 3, 1C350 4, 1C350 5, 1C350 6, 1C350 7, 1C350 8, 1C350 9, 1C350 10, 1C350 11, 1C350 12, 1C350 13, 1C350 14, 1C350 15, 1C350 16, 1C350 17, 1C350 18, 1C350 19, 1C350 20, 1C350 21, 1C350 22, 1C350 23, 1C350 24, 1C350 25, 1C350 26, 1C350 27, 1C350 28, 1C350 29, 1C350 30, 1C350 31, 1C350 32, 1C350 33, 1C350 34, 1C350 35, 1C350 36, 1C350 37, 1C350 38, 1C350 39, 1C350 40, 1C350 41, 1C350 42, 1C350 43, 1C350 44, 1C350 45, 1C350 46, 1C350 47, 1C350 48, 1C350 49, 1C350 50, 1C350 51, 1C350 52, 1C350 53, 1C350 54, 1C450 b1, 1C350 55, 1C350 56, 1C350 57, 1C350 58, 1C350 59, 1C350 60, 1C350 61, 1C350 62, 1C350 63 (correlation table is non-binding)

  Read the act on EUR-Lex
• Dual-use goods Regulation (EU) 2021/821, Annex I 38249996

  Covers only part of the goods under this code (act names 38249996).

  May be dual-use; check the Annex I entry 1C107, 1C111, 1C233, 8C001, 1C350 1, 1C350 2, 1C350 3, 1C350 4, 1C350 5, 1C350 6, 1C350 7, 1C350 8, 1C350 9, 1C350 10, 1C350 11, 1C350 12, 1C350 13, 1C350 14, 1C350 15, 1C350 16, 1C350 17, 1C350 18, 1C350 19, 1C350 20, 1C350 21, 1C350 22, 1C350 23, 1C350 24, 1C350 25, 1C350 26, 1C350 27, 1C350 28, 1C350 29, 1C350 30, 1C350 31, 1C350 32, 1C350 33, 1C350 34, 1C350 35, 1C350 36, 1C350 37, 1C350 38, 1C350 39, 1C350 40, 1C350 41, 1C350 42, 1C350 43, 1C350 44, 1C350 45, 1C350 46, 1C350 47, 1C350 48, 1C350 49, 1C350 50, 1C350 51, 1C350 52, 1C350 53, 1C350 54, 1C450 b1, 1C350 55, 1C350 56, 1C350 57, 1C350 58, 1C350 59, 1C350 60, 1C350 61, 1C350 62, 1C350 63 (correlation table is non-binding)

  Read the act on EUR-Lex

For orientation only. Check the act before you rely on a flag; thresholds, derogations and exceptions are not shown in full. The dual-use table links codes to control list entries and is non-binding.

Tariff quotas for 382499

• Exhausted 09.2542 Origin: all countries (erga omnes)

  Mixture containing bis[3-(triethoxysilyl)propyl]polysulfides (CAS RN 211519-85-6) with a purity by weight of 84 % or more

  Jan 1, 2026 – Dec 31, 2026

  0 Kilograms

  Balance left (0%)

  Volume 2,000,000
• Open 09.2568 Origin: all countries (erga omnes)

  Mixture, in pellet form, containing by weight: – 49 % or more but not more than 50 % of bis[3-(triethoxysilyl)propyl] polysulphides (CAS RN 211519-85-6), and – 50 % or more but not more than 51 % of carbon black (CAS RN 1333-86-4), of which 75 % by weight or more pass through a sieve with an aperture of 0,60 mm, but not more than 10 % pass through a sieve with an aperture of 0,25 mm (as determined by the ASTM D1511 method)

  Jan 1, 2026 – Dec 31, 2026

  287,300 Kilograms

  Balance left (13.7%)

  Volume 2,100,000
• Critical 09.2907 Origin: all countries (erga omnes)

  Mixture of phytosterols, in the form of powder, containing by weight: – 75 % or more of sterols, – not more than 25 % of stanols, for use in the manufacture of stanols/sterols or stanol/sterol esters

  Jan 1, 2026 – Dec 31, 2026

  2,090,400 Kilograms

  Balance left (83.6%)

  Volume 2,500,000

Source: European Commission, tariff quota reports, as of Oct 30, 2026. Balances change daily.

EU trade in 2025 for 382499

Extra-EU imports

€4.1B

1,331,268 t

Extra-EU exports

€7.3B

Top origin countries by import value

1. United States €982.5M
2. South Korea €858.9M
3. China €648.3M
4. United Kingdom €438.3M
5. Türkiye €167.2M

CN8 codes below this code: 20. Source: Eurostat, Comext, CC BY 4.0, processed by hscode.info. Confidential trade is not allocated to codes.

HS 2028 change

From the WCO HS 2022 to HS 2028 correlation tables, a guide only. The EU sets its own CN codes for 2028.

Tariff changes for 382499 since 2016

• Jul 2026 3824999638 Code added
• Jan 2026 5 codes Code removed
• Jan 2026 5 codes Code added
• Jul 2025 3824999232 Code removed
• Jul 2025 5 codes Code added
• Apr 2025 5 codes Code removed
• Apr 2025 3824999217 Code added
• Jan 2025 19 codes Code removed
• Jan 2025 3 codes Code added
• Aug 2024 2 codes Code added
• Jul 2024 3824999372 Code removed
• Jul 2024 3824999271 Code added

31 earlier changes. Month-by-month comparison of the European Commission’s TARIC extractions. Seasonal entry prices left out.

UK import duty for 382499

• 0%
• 2%
• 4%
• 6%
• and more

Third-country duties of all UK commodity codes under this HS subheading. Source: UK Department for Business and Trade, as of Nov 2, 2026. The UK tariff differs from the EU tariff.

Import VAT in the EU

• Austria 20 % maybe 10 %
• Belgium 21 %
• Bulgaria 20 %
• Croatia 25 % maybe 5 %
• Cyprus 19 %
• Czechia 21 %
• Denmark 25 %
• Estonia 24 %
• Finland 25.5 %
• France 20 %
• Germany 19 %
• Greece 24 % maybe 6 %
• Hungary 27 %
• Ireland 23 %
• Italy 22 %
• Latvia 21 %
• Lithuania 21 %
• Luxembourg 17 %
• Malta 18 %
• Netherlands 21 %
• Poland 23 %
• Portugal 23 %
• Romania 21 %
• Slovakia 23 %
• Slovenia 22 % maybe 9.5 %
• Spain 21 %
• Sweden 25 %

Standard rate per member state, on the customs value, the duty and transport to the destination. Reduced rates often depend on the use or the buyer and apply only where the country provides them for these goods. Source: European Commission, Taxes in Europe Database, as of Nov 2, 2026.

Rules of origin

Information

HS Code structure

HS Code tree structure