New Describe a product, get the CN code. Also as API and MCP for AI agents. Try it free
Jump to content

Tariff number 3917330000 80 - Other, not reinforced or otherwise combined with other materials, with fittings

Import trade restrictions for 3917330000 80

Duties for more codes with a free account

You have looked at the duties of 10 codes today. Sign up free to see duties, measures and history for every code.

Free account Many codes at once? Use the API

Preferential rules of origin for 3917330000

What the goods must meet to count as originating in a partner country and get the preferential duty, per agreement.

  • EU-Egypt Association Agreement · Egypt

    EU-Morocco Association Agreement · Morocco

    Semi-manufactures and articles of plastics; except for headings ex3916, ex3917, ex3920 and ex3921, for which the rules are set out below:

    – Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

    – Other:

    – – Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [16] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

    – – Other / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

    Profile shapes and tubes / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of the same heading as the product used does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  • Autonomous Trade Preferences (Western Balkans) · Kosovo

    Semi-manufactures and articles of plastics; except for headings ex39 16, ex39 17, ex39 20 and ex39 21, for which the rules are set out below:

    - Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

    - Other:

    - - Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [16] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

    - - Other / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

    Profile shapes and tubes / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of the same heading as the product used does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  • EU-Canada CETA · Canada

    A change from any other heading.

  • EU-Chile Association Agreement · Chile

    Semi-manufactures and articles of plastics; except for headings ex39 16, ex39 17, ex39 20 and ex39 21, for which the rules are set out below: — Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product — Other: — — Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [16] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product — — Other / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

    Profile shapes and tubes / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of the same heading as the product used does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  • EU-Colombia/Peru/Ecuador Trade Agreement · Colombia, Ecuador, Peru

    Plastics and articles thereof / or: Manufacture from materials of any heading, except that of the product / or: Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

  • EU-Algeria Association Agreement · Algeria

    Semi-manufactures and articles of plastics; except for headings ex3916, ex3917, ex3920 and ex3921, for which the rules are set out below:

    – Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

    – Other:

    – – Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product,

    and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [16] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

    Profile shapes and tubes / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of the same heading as the product used does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  • EPA CARIFORUM

    Semi-manufactures and articles of plastics; except for headings Nos ex 3916, ex 3917, ex 3920 and ex 3921, for which the rules are set out below: – Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of any materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product – Other: – – Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: – the value of all the materials used does not exceed 50 % of the ex-works price of the product; – the value of any materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product (e) / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product – – Other / or: Manufacture in which the value of any materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product (e) / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

    Profile shapes and tubes / or: Manufacture in which: – the value of all the materials used does not exceed 50 % of the ex-works price of the product; – the value of any materials classified within the same heading as the product does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  • EU Market Access Regulation (EPA) · Cameroon, Côte d’Ivoire, Ghana, Kenya

    Semi-manufactures and articles of plastics; except for headings Nos ex3916, ex3917, ex3920 and ex3921, for which the rules are set out below:

    – Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of any materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

    – Other:

    – – Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product; the value of any materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

    – – Other / or: Manufacture in which the value of any materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [18] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

    Profile shapes and tubes / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product; the value of any materials classified within the same heading as the product does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  • Generalised Scheme of Preferences (GSP, GSP+, EBA) · Armenia, India, Kenya, Pakistan, Samoa, Solomon Islands, Syria, Vietnam

    Plastics and articles thereof; except for: / or: (a) LDCs Manufacture from materials of any heading, except that of the product. or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product / or: (b) Other beneficiary countries Manufacture from materials of any heading, except that of the product. or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

  • EU-Israel Association Agreement · Israel

    Profile shapes and tubes / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and the value of any materials classified within the same heading as the product does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  • EU-Jordan Association Agreement · Jordan

    Semi-manufactures and articles of plastics; except for headings ex 3916, ex 3917, ex 3920 and ex 3921, for which the rules are set out below: - Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product - Other: - - Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [16] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product - - Other / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

    Profile shapes and tubes / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of the same heading as the product used does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product - Ionomer sheet or film / or: Manufacture from a thermoplastic partial salt which is a copolymer of ethylene and metacrylic acid partly neutralised with metal ions, mainly zinc and sodium / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product - Sheets of regenerated cellulose, polyamides or polyethylene / or: Manufacture in which the value of all the materials of the same heading as the product used does not exceed 20 % of the ex-works price of the product

  • EU-Japan EPA · Japan

    CTH; MaxNOM 50 % (EXW); or RVC 55 % (FOB).

  • EU-Korea FTA · South Korea

    Plastics in primary forms, waste, parings and scrap, of plastic; semi-manufactures and articles of plastics / or: Manufacture from materials of any heading, except that of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  • EU-Central America Association Agreement

    Semi-manufactures and articles of plastics / or: Manufacture from materials of any heading, except that of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  • EU-Lebanon Association Agreement · Lebanon

    Semi-manufactures and articles of plastics; except for headings ex3916, ex3917, ex3920 and ex3921, for which the rules are set out below:

    – Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

    – Other:

    – – Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [16] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

    – – Other / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

    Profile shapes and tubes / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, within the above limit, the value of all the materials of the same heading as the product used does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  • EU-Mexico Global Agreement · Mexico

    Semi-manufactures and articles of plastics; except for headings Nos ex39 16, ex39 17, ex39 20 and ex39 21, for which the rules are set out below: — Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which all the materials used are classified within a Chapter other than Chapter 39. However, materials classified within Chapter 39 may be used, provided their value does not exceed 50 % of the ex-works price of the product [23] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product — Other: — — Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, the value of any materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [24] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product — — Other / or: Manufacture in which all the materials used are classified within a Chapter other than Chapter 39. However, materials classified within Chapter 39 may be used, provided their value does not exceed 20 % of the ex-works price of the product [25] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

    Profile shapes and tubes / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, the value of any materials classified within the same heading as the product does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  • EU-Palestine Interim Association Agreement · Palestine

    Semi-manufactures and articles of plastics; except for headings Nos ex 3916, ex 3917, ex 3920 and ex 3921, for which the rules are set out below: - Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked - Other: / or: Manufacture in which the value of any materials of Chapter 39 used does not exceed 50% of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product -- Addition homopolymerization products in which a single monomer contributes more than 99% by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50% of the ex-works price of the product; the value of any materials of Chapter 39 used does not exceed 20% of the ex-works price of the product [1] / or: Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product -- Other / or: Manufacture in which the value of any materials of Chapter 39 used does not exceed 20% of the ex-works price of the product 1 / or: Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product

    Profile shapes and tubes / or: Manufacture in which: the value of all the materials used does not exceed 50% of the ex-works price of the product; the value of any materials classified within the same heading as the product does not exceed 20% of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product

  • EU-Singapore FTA · Singapore

    Manufacture from materials of any heading, except that of the product. However materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-work price of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product [21] In the case of the products composed of materials classified within both headings 3901 to 3906, and in the case of the products within headings 3907 to 3911, this restriction only applies to that group of materials which predominates by weight in the product.

  • EU-Tunisia Association Agreement · Tunisia

    Semi-manufactures and articles of plastics; except for headings ex 3916, ex 3917, ex 3920 and ex 3921, for which the rules are set out below: Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [16] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

    Profile shapes and tubes / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of the same heading as the product used does not exceed 20 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

Source: European Commission, Access2Markets (CC BY 4.0, shortened). The text of the agreement prevails. Access2Markets

Legal and explanatory notes for 3917330000

3917 CN Explanatory Notes: Tubes, pipes and hoses, and fittings therefor (for example, joints, elbows, flanges), of plastics

For the definition of the term ‘tubes, pipes and hoses’, see note 8 to this chapter.

Notes to chapter 39

Notes 1. Throughout the nomenclature, the expression ‘plastics’ means those materials of headings 3901 to 3914 which are or have been capable, either at the moment of polymerisation or at some subsequent stage, of being formed under external influence (usually heat and pressure, if necessary with a solvent or plasticiser) by moulding, casting, extruding, rolling or other process into shapes which are retained on the removal of the external influence. Throughout the nomenclature, any reference to ‘plastics’ also includes vulcanised fibre. The expression, however, does not apply to materials regarded as textile materials of Section XI. 2. This chapter does not cover: (a) lubricating preparations of heading 2710 or 3403; (b) waxes of heading 2712 or 3404; (c) separate chemically defined organic compounds (Chapter 29); (d) heparin or its salts (heading 3001); (e) solutions (other than collodions) consisting of any of the products specified in headings 3901 to 3913 in volatile organic solvents when the weight of the solvent exceeds 50 % of the weight of the solution (heading 3208); stamping foils of heading 3212; (f) organic surface-active agents or preparations of heading 3402; (g) run gums or ester gums (heading 3806); (h) prepared additives for mineral oils (including gasoline) or for other liquids used for the same purposes as mineral oils (heading 3811); (ij) prepared hydraulic fluids based on polyglycols, silicones or other polymers of Chapter 39 (heading 3819); (k) diagnostic or laboratory reagents on a backing of plastics (heading 3822); (l) synthetic rubber, as defined for the purposes of Chapter 40, or articles thereof; (m) saddlery or harness (heading 4201) or trunks, suitcases, handbags or other containers of heading 4202; (n) plaits, wickerwork or other articles of Chapter 46; (o) wallcoverings of heading 4814; (p) goods of Section XI (textiles and textile articles); (q) articles of Section XII (for example, footwear, headgear, umbrellas, sun umbrellas, walking sticks, whips, riding-crops or parts thereof); (r) imitation jewellery of heading 7117; (s) articles of Section XVI (machines and mechanical or electrical appliances); (t) parts of aircraft or vehicles of Section XVII; (u) articles of Chapter 90 (for example, optical elements, spectacle frames, drawing instruments); (v) articles of Chapter 91 (for example, clock or watch cases); (w) articles of Chapter 92 (for example, musical instruments or parts thereof); (x) articles of Chapter 94 (for example, furniture, luminaires and lighting fittings, illuminated signs, prefabricated buildings); (y) articles of Chapter 95 (for example, toys, games, sports requisites); or (z) articles of Chapter 96 (for example, brushes, buttons, slide fasteners, combs, mouthpieces or stems for smoking pipes, cigarette-holders or the like, parts of vacuum flasks or the like, pens, propelling pencils, and monopods, bipods, tripods and similar articles). 3. Headings 3901 to 3911 apply only to goods of a kind produced by chemical synthesis, falling in the following categories: (a) liquid synthetic polyolefins of which less than 60 % by volume distils at 300 °C, after conversion to 1 013 mbar when a reduced-pressure distillation method is used (headings 3901 and 3902); (b) resins, not highly polymerised, of the coumarone-indene type (heading 3911); (c) other synthetic polymers with an average of at least five monomer units; (d) silicones (heading 3910); (e) resols (heading 3909) and other prepolymers. 4. The expression ‘copolymers’ covers all polymers in which no single monomer unit contributes 95 % or more by weight to the total polymer content. For the purposes of this chapter, except where the context otherwise requires, copolymers (including co-polycondensates, co-polyaddition products, block copolymers and graft copolymers) and polymer blends are to be classified in the heading covering polymers of that comonomer unit which predominates by weight over every other single comonomer unit. For the purposes of this note, constituent comonomer units of polymers falling in the same heading shall be taken together. If no single comonomer unit predominates, copolymers or polymer blends, as the case may be, are to be classified in the heading which occurs last in numerical order among those which equally merit consideration. 5. Chemically modified polymers, that is those in which only appendages to the main polymer chain have been changed by chemical reaction, are to be classified in the heading appropriate to the unmodified polymer. This provision does not apply to graft copolymers. 6. In headings 3901 to 3914, the expression ‘primary forms’ applies only to the following forms: (a) liquids and pastes, including dispersions (emulsions and suspensions) and solutions; (b) blocks of irregular shape, lumps, powders (including moulding powders), granules, flakes and similar bulk forms. 7. Heading 3915 does not apply to waste, parings and scrap of a single thermoplastic material, transformed into primary forms (headings 3901 to 3914). 8. For the purposes of heading 3917, the expression ‘tubes, pipes and hoses’ means hollow products, whether semi-manufactured or finished products, of a kind generally used for conveying, conducting or distributing gases or liquids (for example, ribbed garden hose, perforated tubes). This expression also includes sausage casings and other lay-flat tubing. However, except for the last mentioned, those having an internal cross-section other than round, oval, rectangular (in which the length does not exceed one-and-a-half times the width) or in the shape of a regular polygon are not to be regarded as tubes, pipes and hoses but as profile shapes. 9. For the purposes of heading 3918, the expression ‘wall or ceiling coverings of plastics’ applies to products in rolls, of a width not less than 45 cm, suitable for wall or ceiling decoration, consisting of plastics fixed permanently on a backing of any material other than paper, the layer of plastics (on the face side) being grained, embossed, coloured, design-printed or otherwise decorated. 10. In headings 3920 and 3921, the expression ‘plates, sheets, film, foil and strip’ applies only to plates, sheets, film, foil and strip (other than those of Chapter 54) and to blocks of regular geometric shape, whether or not printed or otherwise surface-worked, uncut or cut into rectangles (including squares) but not further worked (even if when so cut they become articles ready for use). 11. Heading 3925 applies only to the following articles, not being products covered by any of the earlier headings of sub-chapter II: (a) reservoirs, tanks (including septic tanks), vats and similar containers, of a capacity exceeding 300 litres; (b) structural elements used, for example, in floors, walls or partitions, ceilings or roofs; (c) gutters and fittings therefor; (d) doors, windows and their frames and thresholds for doors; (e) balconies, balustrades, fencing, gates and similar barriers; (f) shutters, blinds (including venetian blinds) and similar articles and parts and fittings thereof; (g) large-scale shelving for assembly and permanent installation, for example, in shops, workshops, warehouses; (h) ornamental architectural features, for example, flutings, cupolas, dovecotes; and (ij) fittings and mountings intended for permanent installation in or on doors, windows, staircases, walls or other parts of buildings, for example, knobs, handles, hooks, brackets, towel rails, switch-plates and other protective plates. Subheading notes 1. Within any one heading of this chapter, polymers (including copolymers) and chemically modified polymers are to be classified according to the following provisions: (a) where there is a subheading named ‘Other’ in the same series: (1) the designation in a subheading of a polymer by the prefix ‘poly’ (for example, polyethylene and polyamide-6,6) means that the constituent monomer unit or monomer units of the named polymer taken together must contribute 95 % or more by weight of the total polymer content; (2) the copolymers named in subheadings 3901 30, 3901 40, 3903 20, 3903 30 and 3904 30 are to be classified in those subheadings, provided that the comonomer units of the named copolymers contribute 95 % or more by weight of the total polymer content; (3) chemically modified polymers are to be classified in the subheading named ‘Other’, provided that the chemically modified polymers are not more specifically covered by another subheading; (4) polymers not meeting (1), (2) or (3) above, are to be classified in the subheading, among the remaining subheadings in the series, covering polymers of that monomer unit which predominates by weight over every other single comonomer unit. For this purpose, constituent monomer units of polymers falling in the same subheading shall be taken together. Only the constituent comonomer units of the polymers in the series of subheadings under consideration are to be compared; (b) where there is no subheading named ‘Other’ in the same series: (1) polymers are to be classified in the subheading covering polymers of that monomer unit which predominates by weight over every other single comonomer unit. For this purpose, constituent monomer units of polymers falling in the same subheading shall be taken together. Only the constituent comonomer units of the polymers in the series under consideration are to be compared; (2) chemically modified polymers are to be classified in the subheading appropriate to the unmodified polymer. Polymer blends are to be classified in the same subheading as polymers of the same monomer units in the same proportions. 2. For the purposes of subheading 3920 43, the term ‘plasticisers’ includes secondary plasticisers. Additional note 1. Where the woven, knitted or crocheted fabrics, felt or nonwovens are present merely for reinforcing purposes, gloves, mittens or mitts impregnated, coated or covered with cellular plastics belong to Chapter 39, even if they are: — made up from woven, knitted or crocheted fabrics (other than those of heading 5903), felt or nonwovens impregnated, coated or covered with cellular plastics, or — made up from unimpregnated, uncoated or uncovered woven, knitted or crocheted fabrics, felt or nonwovens and subsequently impregnated, coated or covered with cellular plastics. (Note 3(c) to Chapter 56 and note 2(a)(5) to Chapter 59).

Notes to section VII

PLASTICS AND ARTICLES THEREOF; RUBBER AND ARTICLES THEREOF Notes 1. Goods put up in sets consisting of two or more separate constituents, some or all of which fall in this section and are intended to be mixed together to obtain a product of Section VI or VII, are to be classified in the heading appropriate to that product, provided that the constituents are: (a) having regard to the manner in which they are put up, clearly identifiable as being intended to be used together without first being repacked; (b) presented together; and (c) identifiable, whether by their nature or by the relative proportions in which they are present, as being complementary one to another. 2. Except for the goods of heading 3918 or 3919, plastics, rubber, and articles thereof, printed with motifs, characters or pictorial representations, which are not merely subsidiary to the primary use of the goods, fall in Chapter 49.

Other explanatory notes for the chapter

General The HS Explanatory Note to Chapter 39, General, ‘Combinations of plastics and materials other than textiles’, point (d), applies, mutatis mutandis, to combinations of carbon fibres and plastics.

Note 4 Calculation of mass ratios of monomer units in copolymers: The mass ratios of the respective monomer units in copolymer chains are calculated based on the molecular structure of the copolymer (not the starting materials), taking into account the formation reaction of the polymer. When applicable, the atom linking two adjacent monomer units is attributed to the monomer unit from which the atom originates. The following examples illustrate the calculation of the monomer unit content in copolymers: — In poly(ethylene terephthalate), which is a polyester comprised of terephthalic acid and ethylene glycol moieties, both alcoholic oxygens are attributed to the glycol monomer unit. Hence, ethylene glycol is calculated as C2H4O2, and terephthalate is calculated as C8H4O2. — In polyamide-6,6, which is a polyamide comprised of hexamethylenediamine and adipic acid, both nitrogen atoms are attributed to the diamine monomer unit. Hence, hexamethylenediamine is calculated as C6H14N2 and adipic acid is calculated as C6H8O2.

Note 6 The term ‘solutions’, used both in this note and in note 4 to Chapter 32, does not apply to colloidal solutions.

Sources: Combined Nomenclature 2026, Annex I to Regulation (EEC) No 2658/87 (CELEX 32025R1926), and the Explanatory Notes to the Combined Nomenclature (CELEX 02019XC0329(02)-20260213). The section and chapter notes are legally binding; the explanatory notes are guidance. EUR-Lex

EU classification regulations for 3917330000

Commission regulations that classified specific goods under this code. They bind customs in every member state for identical goods.

  • 3917 33 00 Jul 23, 2026 · Regulation on EUR-Lex
    An article to be used in connection with infusion systems consisting of:

    — three interconnected transparent plastic tubes, each approximately 5 cm long and approximately 1,5 mm in outer diameter, — a Y-connector, — a simple Luer Lock connector with a rotating nut and a protective cap, — two Luer Lock connectors with an integrated non-return valve, and — two slide clamps. The three tubes are connected to each other with the Y-connector. The single tube, forming the lower branch of the ‘Y’, is fitted with a Luer Lock connector with a rotating nut and a protective cap, while the two tubes at the upper end of the ‘Y’ are each equipped with a slide clamp and a Luer Lock connector with an integrated non-return valve. The product is approximately 15 cm long in total. The Luer Lock connectors are used to connect the article to other tubes and/or devices (e.g. syringes) in a manner which prevents leakage. The article is designed for single use in healthcare facilities, home care, outpatient care and medical transport (e.g. in ambulances) in connection with infusion systems for administering liquids. For this purpose, the tube at the lower branch of the ‘Y’ is connected to the patient access side of the infusion system by means of a Luer Lock connector. Since there are two tubes, each with a Luer Lock connector at the upper end of the ‘Y’ (inflow), several doses of infusion can be administered simultaneously when the product is used, without having to touch or change the patient access side of the infusion system. The non-return valves form a physical barrier (closed system) and prevent microbial contamination. The inflow through the tubes can be regulated by the slide clamps attached to the tubes at the top of the ‘Y’. The article is presented in a sterile, single packaging. (See image) (*1)

    Reasons

    Classification is determined by general rules 1, 3(b) and 6 for the interpretation of the Combined Nomenclature, Note 8 to Chapter 39 and by the wording of CN codes 3917 and 3917 33 00. Despite the fact that the article is presented in sterile packs and used for infusion systems, based on its objective characteristics, it cannot be identified as used solely or principally with such systems. Consequently, classification under heading 9018 as a part of a medical instrument within the meaning of Note 2 to Chapter 90 is excluded. The article is composite goods consisting of different components, namely (a) interconnected plastic tubes combined with plastic connectors, (b) clamps and (c) valves. The article incorporates more than accessory features to the valves (see also the Harmonized System Explanatory Notes (HSEN) to heading 8481, seventh paragraph). The interconnected plastic tubes with connectors play the essential role in relation to the use of the article, which is to administer liquids. It is therefore this component which gives the whole its essential character and it is to be classified according to that component. Consequently, classification under heading 8481 as a valve or similar appliance is excluded. As the plastic tubes are combined with plastic connectors, they shall be considered as plastic tubes with fittings. Given its objective characteristics and properties, the interconnected plastic tubes with connectors meets the terms of heading 3917 and fulfils the requirements of Note 8 to Chapter 39 (see also the HSEN, General to Chapter 39 and to heading 3917). It is therefore to be classifed under CN code 3917 33 00 as other tubes of plastics, not reinforced or otherwise combined with other materials, with fittings.

  • 3917 33 00 Dec 5, 2016 · Regulation on EUR-Lex
    An article consisting of three flexible tubes joined together with a Y-shaped connection piece. Each of the tubes has a Luer connector at the end. The article has a total length of approximately 16 cm and the diameter of the tubes is approximately 4 mm. The article is made of various plastics such as polyvinyl chloride and acrylic polymer.

    The Luer connector is used to connect the article to other tubes and/or devices (for example syringes) in a manner which prevents leakage. The article is used in various fields such as medical environment, laboratory work, research and other environments where a connection which prevents leaking is required. See image (*1).

    Reasons

    Classification is determined by general rules 1 and 6 for the interpretation of the Combined Nomenclature, Note 8 to Chapter 39 and by the wording of CN codes 3917 and 3917 33 00 . Upon presentation to customs the article is not identifiable as part of a medical instrument within the meaning of note 2 to Chapter 90. Consequently, classification under heading 9018 is excluded. Given its objective characteristics and properties, the article meets the terms of heading 3917 and fulfils the requirements of Note 8 to Chapter 39. It is therefore to be classified under CN code 3917 33 00 as other tubes, not reinforced or otherwise combined with other materials, with fittings.

UK advance tariff rulings for 3917330000

Rulings of HM Revenue & Customs for goods with UK commodity codes that start like this EU code. The UK tariff differs from the EU tariff, so these rulings are guidance for the EU.

  • UK 3917330090 Valid Aug 5, 2026 to Aug 4, 2029 · Ruling 600015516 on GOV.UK

    The irrigation tubing with CO2/Air is designed for up to 24 hours of use. It provides sterile water through the auxiliary channel and CO2 or air insufflation and lens flushing via the dual air-water channel in compatible gastrointestinal or colono endoscopes. Components are made from plastic. The irrigation tubing system is intended to fit a range of branded disposable sterile bottles available on the market. Packaged in Ethylene Oxide sterilised single packs and a 24hr use traceability label within the pack.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General Interpretative Rules (GIR)s: GIR 1 Has been used to classify this product by the terms of heading 3917 - Tubes, pipes and hoses, and fittings therefor (for example, joints, elbows, flanges), of plastics. GIR 5B Has been used identify the type of packaging: sterilised single packs and cardboard box. GIR 6 Has been used to classify this product by the terms of heading 391733 - Other tubes, pipes and hoses; Other, not reinforced or otherwise combined with other materials, with fittings. 10 Digit code 3917330090 - Other than elsewhere specified. Also classified in accordance with: Chapter 39 Note 1 and 8 Chapter 90 Note 2 Harmonised System Explanatory …

  • UK 3917330090 Valid Aug 5, 2026 to Aug 4, 2029 · Ruling 600015540 on GOV.UK

    A single-use, sterile accessory port tube designed to deliver controlled, sterile saline via an irrigation flushing pump. It is made of plastic and is compatible for use with EndoTherapy devices. The tube works in conjunction with electrosurgical knives, flushing pumps, and disposable saline bottles. Packaged in sterile packs and then cardboard box.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General Interpretative Rules (GIR)s: GIR 1 Has been used to classify this product by the terms of heading 3917 - Tubes, pipes and hoses, and fittings therefor (for example, joints, elbows, flanges), of plastics. GIR 5B Has been used identify the type of packaging: single packs and cardboard box. GIR 6 Has been used to classify this product by the terms of heading 391733 - Other tubes, pipes and hoses; Other, not reinforced or otherwise combined with other materials, with fittings. 10 Digit code 3917330090 - Other than elsewhere specified. Also classified in accordance with: Chapter 39 Note 1 and 8 Chapter 90 Note 2 Harmonised System Explanatory Notes …

  • UK 3917330090 Valid Aug 5, 2026 to Aug 4, 2029 · Ruling 600015541 on GOV.UK

    A single-use sterile accessory designed to supply water for irrigation during endoscopic procedures. The tube is made from flexible plastic and rigid PVC for the connector. Compatible with Olympus gastrointestinal, colonoscopy, and ultrasound endoscopes. connects via an irrigation flushing pump and an instrument channel adaptor. This product is used solely in combination with an instrument channel adaptor. The tube is designed to work with the water container, flushing pump, compatible endoscopes and ultrasound endoscopes. Packaged in sterile packs and then cardboard box.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General Interpretative Rules (GIR)s: GIR 1 Has been used to classify this product by the terms of heading 3917 - Tubes, pipes and hoses, and fittings therefor (for example, joints, elbows, flanges), of plastics. GIR 5B Has been used identify the type of packaging: single packs and cardboard box. GIR 6 Has been used to classify this product by the terms of heading 391733 - Other tubes, pipes and hoses; Other, not reinforced or otherwise combined with other materials, with fittings. 10 Digit code 3917330090 - Other than elsewhere specified. Also classified in accordance with: Chapter 39 Note 1 and 8 Chapter 90 Note 2 Harmonised System Explanatory Notes …

+ 1 more
  • UK 3917330090 Valid Aug 5, 2026 to Aug 4, 2029 · Ruling 600015543 on GOV.UK

    A sterile, single-use patient connecting tube used as an accessory to suction pumps. Made from plastic. Its primary function is to transport fluids from the patient through an endoscope or other equipment into a suction jar during suction procedures. Designed for certain types of suction pumps. One end of the tubing connects to the endoscope, the other end connects to the suction jar, when the suction pump creates negative pressure, fluids are drawn through the tubing into the collection system. Packaged in sterile packs and then cardboard box.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General Interpretative Rules (GIR)s: GIR 1 Has been used to classify this product by the terms of heading 3917 - Tubes, pipes and hoses, and fittings therefor (for example, joints, elbows, flanges), of plastics. GIR 5B Has been used identify the type of packaging: sterilised single packs and cardboard box. GIR 6 Has been used to classify this product by the terms of heading 391733 - Other tubes, pipes and hoses; Other, not reinforced or otherwise combined with other materials, with fittings. 10 Digit code 3917330090 - Other than elsewhere specified. Also classified in accordance with: Chapter 39 Note 1 and 8 Chapter 90 Note 2 Harmonised System Explanatory …

Source: HM Revenue & Customs, Advance Tariff Rulings. Contains public sector information licensed under the Open Government Licence v3.0.

Restrictions and flags for 391733

  • Russia sanctions: import ban Regulation (EU) No 833/2014, Annex XXI 3917

    Art. 3i, goods generating significant revenue for Russia

    Read the act on EUR-Lex
  • Russia sanctions: export ban Regulation (EU) No 833/2014, Annex XXIII 3917

    Art. 3k, goods contributing to Russian industrial capacity

    Read the act on EUR-Lex
  • Dual-use goods Regulation (EU) 2021/821, Annex I 39173300

    Covers only part of the goods under this code (act names 39173300).

    May be dual-use; check the Annex I entry 2B350h (correlation table is non-binding)

    Read the act on EUR-Lex

For orientation only. Check the act before you rely on a flag; thresholds, derogations and exceptions are not shown in full. The dual-use table links codes to control list entries and is non-binding.

EU trade in 2025 for 391733

Extra-EU imports
€300.5M
22,154 t
Extra-EU exports
€265.1M

Top origin countries by import value

  1. China €71.5M
  2. United States €64.4M
  3. United Kingdom €53.2M
  4. Switzerland €19.5M
  5. Singapore €14.9M

CN8 codes below this code: 1. Source: Eurostat, Comext, CC BY 4.0, processed by hscode.info. Confidential trade is not allocated to codes.

HS 2028 change

This subheading changes on 1 January 2028.

HS 2022 subheading 391733 is split. New HS 2028 subheadings: 391734, 391736.

From the WCO HS 2022 to HS 2028 correlation tables, a guide only. The EU sets its own CN codes for 2028.

UK import duty for 391733

  • 6%

Third-country duties of all UK commodity codes under this HS subheading. Source: UK Department for Business and Trade, as of Nov 2, 2026. The UK tariff differs from the EU tariff.

Import VAT in the EU

  • Austria 20 %
  • Belgium 21 %
  • Bulgaria 20 %
  • Croatia 25 % maybe 5 %
  • Cyprus 19 %
  • Czechia 21 %
  • Denmark 25 %
  • Estonia 24 % maybe 9 %
  • Finland 25.5 %
  • France 20 %
  • Germany 19 %
  • Greece 24 %
  • Hungary 27 %
  • Ireland 23 %
  • Italy 22 %
  • Latvia 21 %
  • Lithuania 21 %
  • Luxembourg 17 %
  • Malta 18 %
  • Netherlands 21 %
  • Poland 23 %
  • Portugal 23 %
  • Romania 21 %
  • Slovakia 23 %
  • Slovenia 22 %
  • Spain 21 %
  • Sweden 25 %

Standard rate per member state, on the customs value, the duty and transport to the destination. Reduced rates often depend on the use or the buyer and apply only where the country provides them for these goods. Source: European Commission, Taxes in Europe Database, as of Nov 2, 2026.

Rules of origin

Preferential rules of origin for subheading 391733 depend on the trade agreement. The Commission publishes them in Access2Markets.

Rules of origin on Access2Markets

Information

When importing or exporting "Other, not reinforced or otherwise combined with other materials, with fittings", it is crucial to have the correct HS code or TARIC code. The HS code 3917330000 80 serves as the standard code for this product, ensuring that the appropriate duties and taxes are applied when crossing international borders.

To ensure your business transactions run smoothly when importing or exporting "Other, not reinforced or otherwise combined with other materials, with fittings", consider the following points:

  1. Inform yourself about the specific import and export regulations in the countries involved. This includes possible restrictions, taxes, and duties applicable to "Other, not reinforced or otherwise combined with other materials, with fittings".
  2. Check if any additional licenses, permits, or certificates are required to import "Other, not reinforced or otherwise combined with other materials, with fittings" into the destination country or export it from the country of origin.
  3. Make sure your trading partners have valid identification numbers, such as EORI numbers (Economic Operators Registration and Identification) in the EU, to streamline trade and minimize delays.
  4. Ensure that all trade- and customs-related documents (such as commercial invoices, packing lists, certificates of origin, and insurance policies) are accurately completed and adhere to the respective national regulations.
  5. Keep an eye on the current exchange rates, as well as packaging, shipping, and insurance costs, to accurately calculate trade costs.

In summary, the HS code or TARIC code for "Other, not reinforced or otherwise combined with other materials, with fittings" is 3917330000 80. Make sure you accurately use this code in all your trade and customs documents to guarantee smooth and hassle-free transactions. With these tips, you'll be better prepared for the challenges of international trade and can successfully import and export "Other, not reinforced or otherwise combined with other materials, with fittings".

HS Code structure

39
Chapter
17
Heading
33
Subheading
00
CN Subheading
00
TARIC Subheading
80
Additional TARIC codes

1. Chapter

There are 21 different sections, which are divided into 96 chapters. Exceptional chapters include chapter 77, which is reserved for future use, chapters 98 and 99, which are limited at national level, and chapter 99, which is a specific code for temporary changes. In the example above, chapter 39 was selected for plastics and articles thereof

2. Heading

The heading determines the specific category within a certain chapter. In the example above, the 17 refers to Tubes, pipes and hoses, and fittings therefor (for example, joints, elbows, flanges), of plastics.

3. Subheading

The last two digits of the international harmonized code are more specific and define subcategories of products. In the example above, the 33 refers to Other, not reinforced or otherwise combined with other materials, with fittings.

HS Code tree structure

3900000000 80

Chapter PLASTICS AND ARTICLES THEREOF

3917000000 80

Tubes, pipes and hoses, and fittings therefor (for example, joints, elbows, flanges), of plastics

3917100000 80

- Artificial guts (sausage casings) of hardened protein or of cellulosic materials

3917101000 80

- - Of hardened protein

3917109000 80

- - Of cellulosic materials

3917210000 10

- Tubes, pipes and hoses, rigid

3917210000 80

- - Of polymers of ethylene

3917211000 80

- - - Seamless and of a length exceeding the maximum cross-sectional dimension, whether or not surface-worked, but not otherwise worked

3917211010 80

- - - - For use in certain types of aircraft

3917211090 80

- - - - Other

3917219000 80

- - - Other

3917219010 80

- - - - With fittings attached, for use in civil aircraft

3917219020 80

- - - - For use in certain types of aircraft

3917219090 80

- - - - Other

3917220000 80

- - Of polymers of propylene

3917221000 80

- - - Seamless and of a length exceeding the maximum cross-sectional dimension, whether or not surface-worked, but not otherwise worked

3917221010 80

- - - - For use in certain types of aircraft

3917221090 80

- - - - Other

3917229000 80

- - - Other

3917229010 80

- - - - With fittings attached, for use in civil aircraft

3917229020 80

- - - - For use in certain types of aircraft

3917229090 80

- - - - Other

3917230000 80

- - Of polymers of vinyl chloride

3917231000 80

- - - Seamless and of a length exceeding the maximum cross-sectional dimension, whether or not surface-worked, but not otherwise worked

3917231010 80

- - - - For use in certain types of aircraft

3917231090 80

- - - - Other

3917239000 80

- - - Other

3917239010 80

- - - - With fittings attached, for use in civil aircraft

3917239020 80

- - - - For use in certain types of aircraft

3917239090 80

- - - - Other

3917290000 80

- - Of other plastics

3917290011 10

- - - Of addition polymerisation products

3917290011 80

- - - - For use in certain types of aircraft

3917290019 80

- - - - Other

3917290091 10

- - - Other

3917290091 80

- - - - With fittings attached, for use in civil aircraft

3917290099 80

- - - - Other

3917310000 10

- Other tubes, pipes and hoses

3917310000 80

- - Flexible tubes, pipes and hoses, having a minimum burst pressure of 27,6 MPa

3917310010 80

- - - With fittings attached, for use in civil aircraft

3917310020 80

- - - For use in certain types of aircraft

3917310030 80

- - - Tubings: -with an outer diameter of 0,33 mm or more but not more than 3,3 mm, -with an inner diameter of 0,01 mm or more but not more than 2,1 mm, -suitable for a maximum working pressure rate from 2,7 MPa up to 70 MPa, -suitable for all solutions used in chromatography, -whether or not with fused silica, -whether or not covered with PEEK, for use in chromatographic system

3917310090 80

- - - Other

3917320000 80

- - Other, not reinforced or otherwise combined with other materials, without fittings

3917320010 80

- - - For use in certain types of aircraft

3917320020 80

- - - Tubings: -with an outer diameter of 0,33 mm or more but not more than 3,3 mm, -with an inner diameter of 0,01 mm or more but not more than 2,1 mm, -suitable for a maximum working pressure rate from 2,7 MPa up to 70 MPa, -suitable for all solutions used in chromatography, -whether or not with fused silica, -whether or not covered with PEEK, for use in chromatographic system

3917320030 80

- - - Heat shrinkable tube: -containing by weight 80 % or more polymer, -with an insulation resistance of 90 MW or more, -with a dielectric strength of 35 kV / mm or more, -with a wall thickness of 0,04 mm or more, but not more than 0,9 mm, -with a lay-flat width of 18 mm or more, but not more than 156 mm, for use in the manufacture of aluminium electrolytic capacitors

3917320090 80

- - - Other

3917330000 80

- - Other, not reinforced or otherwise combined with other materials, with fittings

3917330010 80

- - - With fittings attached, for use in civil aircraft

3917330090 80

- - - Other

3917390000 80

- - Other

3917390010 80

- - - With fittings attached, for use in civil aircraft

3917390020 10

- - - Other

3917390020 80

- - - - Tubings: -with an outer diameter of 0,33 mm or more but not more than 3,3 mm, -with an inner diameter of 0,01 mm or more but not more than 2,1 mm, -suitable for a maximum working pressure rate from 2,7 MPa up to 70 MPa, -suitable for all solutions used in chromatography, -whether or not with fused silica, -whether or not covered with PEEK, for use in chromatographic system

3917390091 80

- - - - For use in certain types of aircraft

3917390099 80

- - - - Other

3917400000 80

- Fittings

3917400010 80

- - For use in civil aircraft

3917400020 10

- - Other

3917400020 80

- - - Plastic fittings (kit of nuts and ferrules or nuts) and connectors: -threaded, -supported with or without a stainless steel ring, -suitable for a maximum working pressure rate of 2,7 MPa or more but not more than 114 MPa,  for tubings with: -outer diameter of 0,33 mm or more but not more than 3,3 mm, -suitable for a maximum working pressure rate of 2,7 MPa or more but not more than 114 MPa, -suitable for all solutions used in chromatography, for use in the production of chromatographic systems

3917400091 80

- - - Plastic connectors containing O-rings, a retainer clip and a release system for insertion into car fuel hoses

3917400099 80

- - - Other