HS Code 3921120000 80 Of polymers of vinyl chloride

Import trade restrictions for 3921120000 80

This table contains information on trade restrictions for the import of goods into the EU and the EU into third countries. The table contains information on trade restrictions which are imposed due to customs unions, preferences, tariff quotas, customs unions, veterinary controls, third country duties and non-preferential tariff quotas.

Duties 67
	Origin country	Start	Duty / Tax	Legal base Measure type
1011	ERGA OMNES 1011	01-01-2004	6.5 %	Regulation1789/03 Third country duty 103
1007	EU-Switzerland agreement: re-imported goods 1007	01-01-2007	0 %	Regulation2840/72 Tariff preference 142
BA	Bosnia and Herzegovina BA	01-01-2009	0 %	Decision0474/08 Tariff preference 142
MK	North Macedonia MK	01-01-2009	0 %	Decision0239/04 Tariff preference 142
SG	Singapore SG	01-01-2027	0 %	Decision1875/19 Tariff preference 142
XS	Serbia XS	01-02-2010	0 %	Decision0036/10 Tariff preference 142
JP	Japan JP	01-02-2020	0 %	Decision1907/18 Tariff preference 142
PE	Peru PE	01-03-2013	0 %	Decision0735/12 Tariff preference 142
AL	Albania AL	01-04-2009	0 %	Decision0332/09 Tariff preference 142
XK	Kosovo XK	01-04-2016	0 %	Decision0342/16 Tariff preference 142
ME	Montenegro ME	01-05-2010	0 %	Decision0224/10 Tariff preference 142
NZ	New Zealand NZ	01-05-2024	0 %	Decision0244/24 Tariff preference 142
1011	ERGA OMNES 1011	01-11-2018	0 %	Regulation1517/18 Airworthiness tariff suspension 119
AM	Armenia AM	10-10-2026 – 11-10-2028	0 %	Regulation2269/26 Tariff preference 142
CH	Switzerland CH	20-12-1972	0 %	Regulation2840/72 Tariff preference 142
1006	EU-Canada agreement: re-imported goods 1006	21-09-2017	0 %	Decision0037/17 Tariff preference 142
CA	Canada CA	21-09-2017	0 %	Decision0037/17 Tariff preference 142
SG	Singapore SG	21-11-2019 – 31-12-2026	0 %	Decision1875/19 Tariff preference 142
UA	Ukraine UA	01-01-2016	0 %	Decision0295/14 Tariff preference 142
2020	GSP - General arrangements 2020	01-01-2023	0 %	Regulation0978/12 Tariff preference 142
5500	Mercosur 5500	01-05-2026 – 31-12-2026	5.2 %	Decision0183/26 Tariff preference 142
FO	Faroe Islands FO	01-01-1997	0 %	Decision0126/97 Tariff preference 142
XL	Melilla XL	01-01-1999	0 %	Accession act0001/85 Tariff preference 142
PS	Occupied palestinian Territory PS	01-01-2001	0 %	Decision0430/97 Tariff preference 142
AD	Andorra AD	01-01-2006	0 %	Decision0680/90 Customs union duty 106
SM	San Marino SM	01-01-2006	0 %	Decision0245/02 Customs union duty 106
TR	Türkiye TR	01-01-2006	0 %	Decision0142/96 Customs union duty 106
2027	GSP+ (incentive arrangement for sustainable development and good governance) 2027	01-01-2014	0 %	Regulation0978/12 Tariff preference 142
2005	GSP-EBA (Special arrangement for the least-developed countries - Everything But Arms) 2005	01-01-2014	0 %	Regulation0978/12 Tariff preference 142
MD	Moldova, Republic of MD	01-01-2016	0 %	Decision0492/14 Tariff preference 142
EC	Ecuador EC	01-01-2017	0 %	Decision2369/16 Tariff preference 142
GB	United Kingdom GB	01-01-2021	0 %	Decision2253/20 Tariff preference 142
2080	OCTs (Overseas Countries and Territories) 2080	01-01-2021	0 %	Decision1764/21 Tariff preference 142
GH	Ghana GH	01-01-2027	0 %	Decision1850/16 Tariff preference 142
CL	Chile CL	01-02-2025	0 %	Decision3016/24 Tariff preference 142
TN	Tunisia TN	01-03-1998	0 %	Decision0238/98 Tariff preference 142
MA	Morocco MA	01-03-2000	0 %	Decision0204/00 Tariff preference 142
LB	Lebanon LB	01-04-2006	0 %	Decision0356/06 Tariff preference 142
JO	Jordan JO	01-05-2002	0 %	Decision0357/02 Tariff preference 142
EG	Egypt EG	01-06-2004	0 %	Decision0635/04 Tariff preference 142
XC	Ceuta XC	01-07-1991	0 %	Accession act0001/85 Tariff preference 142
2012	EEA - European Economic Area 2012	01-07-2007	0 %	Decision0001/94 Tariff preference 142
KR	Korea, Republic of (South Korea) KR	01-07-2014	0 %	Decision0265/11 Tariff preference 142
MX	Mexico MX	01-07-2016	0 %	Decision0415/00 Tariff preference 142
KE	Kenya KE	01-07-2024	0 %	Decision1647/24 Tariff preference 142
US	United States US	01-07-2026	0 %	Regulation1455/26 Tariff preference 142
SY	Syria SY	01-08-1994	0 %	Regulation2216/78 Tariff preference 142
CO	Colombia CO	01-08-2013	0 %	Decision0735/12 Tariff preference 142
2200	Central America 2200	01-08-2013	0 %	Decision0734/12 Tariff preference 142
VN	Viet Nam VN	01-08-2020	0 %	Decision0753/20 Tariff preference 142
DZ	Algeria DZ	01-09-2005	0 %	Decision0690/05 Tariff preference 142
GE	Georgia GE	01-09-2014	0 %	Decision0494/14 Tariff preference 142
1011	ERGA OMNES 1011	01-11-2026	2 EUR	Regulation2108/26 Union handling fee 800
1011	ERGA OMNES 1011	01-11-2026	3 EUR	Regulation0382/26 Low-value consignment customs duty 107
CI	Ivory Coast CI	02-12-2019	0 %	Decision0156/09 Tariff preference 142
2000	Preferential origin in accordance with the Agreement in the form of an Exchange of Letters between the European Union and the Kingdom of Morocco on the amendment of Protocols 1 and 4 to the Euro-Mediterranean Agreement establishing an association between the European Communities and their Member States, of the one part, and the Kingdom of Morocco, of the other part. 2000	03-10-2025	0 %	Decision2022/25 Tariff preference 142
CM	Cameroon CM	04-08-2014	0 %	Decision0152/09 Tariff preference 142
1035	SADC EPA 1035	10-10-2016	0 %	Decision1623/16 Tariff preference 142
ZA	South Africa ZA	10-10-2016	0 %	Decision1623/16 Tariff preference 142
1034	Eastern and Southern Africa States 1034	14-05-2012	0 %	Decision0196/12 Tariff preference 142
GH	Ghana GH	15-12-2016 – 31-12-2026	0 %	Decision1850/16 Tariff preference 142
IL	Israel IL	16-05-2023	0 %	Decision0855/09 Tariff preference 142
SB	Solomon Islands SB	17-05-2020	0 %	Decision0729/09 Tariff preference 142
PG	Papua New Guinea PG	20-12-2009	0 %	Decision0729/09 Tariff preference 142
FJ	Fiji FJ	28-07-2014	0 %	Decision0729/09 Tariff preference 142
1033	CARIFORUM 1033	29-12-2008	0 %	Decision0805/08 Tariff preference 142
WS	Samoa WS	31-12-2018	0 %	Decision0729/09 Tariff preference 142

Controls and documents 5
	Origin country	Start	Duty / Tax	Legal base Measure type
RU	Russian Federation RU	19-12-2023 – 31-12-2027	Document required banned without it	Regulation0833/14 Import control 762
BY	Belarus BY	25-02-2025	Document required banned without it	Regulation0765/06 Import control 760
1011	ERGA OMNES 1011	11-03-2024	Document required banned without it	Regulation0590/24 Import control on ozone-depleting substances 726
UA	Ukraine UA	24-06-2026	Document required banned without it	Regulation0263/22 Import control 762
UA	Ukraine UA	24-06-2026	Document required banned without it	Regulation0692/14 Import control 760

Explanation of trade restrictions

Erga Omnes means "for all".

Third countries are countries that are not part of the EU.

GSP means "Generalised System of Preferences".

GSP Plus means "Generalised System of Preferences Plus".

European Economic Area (EEA) means all EU member states and Iceland, Liechtenstein and Norway.

OCTs stands for "Overseas Countries and Territories". They are countries and territories that are not part of the EU. More information

CARIFORUM is a regional economic integration organisation comprising 15 Caribbean Community (CARICOM) countries and the Dominican Republic.

SADC EPA stands for "Southern African Development Community - Economic Partnership Agreement".

Duty means "customs duties".

Estimate the import cost for 392112

Customs value Currency

Country of origin Imported into Sold online to a buyer in the EU (distance sale)

Customs value €1,000.00
Customs duty 6.5 % €65.00
Import VAT 19 % €202.35
Total €1,267.35

May be lower under conditions:

Airworthiness tariff suspension: 0 %

Documents and checks for China

Import control on ozone-depleting substances: Document required, banned without it L100 Y793 Y792 Y791 Y789 Y790 Y797 Y798 Y799

An estimate only. The customs value is the price including transport and insurance to the EU border. Excise duties, other fees and producer-specific anti-dumping rates are not included. Preferential rates need valid proof of origin. Country groups and exclusions: TARIC, as of November 2026.

Export measures for 3921120000

What applies when these goods leave the EU: export controls, dual-use and other authorisations, bans per destination and the supplementary unit of the export declaration.

Controls and documents 3
	Destination	Start	Duty / Tax	Legal base Measure type
BY	Belarus BY	25-02-2025	Document required banned without it	Regulation0765/06 Export control 766
RU	Russian Federation RU	27-09-2024	Document required banned without it	Regulation0833/14 Export control 709
1008	All third countries 1008	11-03-2024	Document required banned without it	Regulation0590/24 Export control on ozone-depleting substances 725

History

Duty rates and measures for this code over time (yearly snapshots).

Preferential rules of origin for 3921120000

What the goods must meet to count as originating in a partner country and get the preferential duty, per agreement.

EEA/EFTA agreements (Switzerland, Norway, Liechtenstein, Faroe Islands) · Faroe Islands, Liechtenstein, Norway, Switzerland
EU-Iceland FTA · Iceland
EU-Ukraine DCFTA · Ukraine

Foils of plastic, metallised / or: Manufacture from highly-transparent polyester-foils with a thickness of less than 23 micron [18] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
EU-Georgia DCFTA · Georgia
EU-Moldova DCFTA · Moldova
Pan-Euro-Mediterranean (PEM) Convention · Albania, Andorra, Bosnia & Herzegovina, Egypt, Faroe Islands, Iceland, Kosovo, Liechtenstein, Montenegro, North Macedonia, Norway, Palestine, Switzerland, Türkiye

Foils of plastic, metallised / or: Manufacture from highly-transparent polyester-foils with a thickness of less than 23 micron [20] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
EU-Egypt Association Agreement · Egypt
EU-Morocco Association Agreement · Morocco

Semi-manufactures and articles of plastics; except for headings ex3916, ex3917, ex3920 and ex3921, for which the rules are set out below:
– Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
– Other:
– – Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [16] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
– – Other / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
Foils of plastic, metallised / or: Manufacture from highly-transparent polyester-foils with a thickness of less than 23 micron [18] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
Autonomous Trade Preferences (Western Balkans) · Kosovo

Semi-manufactures and articles of plastics; except for headings ex39 16, ex39 17, ex39 20 and ex39 21, for which the rules are set out below:
- Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
- Other:
- - Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [16] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
- - Other / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
Foils of plastic, metallised / or: Manufacture from highly-transparent polyester-foils with a thickness of less than 23 micron [18] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
EU-Canada CETA · Canada

A change from any other heading.
EU-Chile Association Agreement · Chile

Semi-manufactures and articles of plastics; except for headings ex39 16, ex39 17, ex39 20 and ex39 21, for which the rules are set out below: — Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product — Other: — — Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [16] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product — — Other / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
Foils of plastic, metallised / or: Manufacture from highly-transparent polyester-foils with a thickness of less than 23 micron [18] / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
EU-Colombia/Peru/Ecuador Trade Agreement · Colombia, Ecuador, Peru

Plastics and articles thereof / or: Manufacture from materials of any heading, except that of the product / or: Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product
EU-Algeria Association Agreement · Algeria

Semi-manufactures and articles of plastics; except for headings ex3916, ex3917, ex3920 and ex3921, for which the rules are set out below:
– Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
– Other:
– – Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product,
and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [16] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
Foils of plastic, metallised / or: Manufacture from highly-transparent polyester-foils with a thickness of less than 23 micron [18] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
EPA CARIFORUM

Semi-manufactures and articles of plastics; except for headings Nos ex 3916, ex 3917, ex 3920 and ex 3921, for which the rules are set out below: – Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of any materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product – Other: – – Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: – the value of all the materials used does not exceed 50 % of the ex-works price of the product; – the value of any materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product (e) / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product – – Other / or: Manufacture in which the value of any materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product (e) / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
Foils of plastic, metallised / or: Manufacture from highly transparent polyester foils with a thickness of less than 23 micron (f) / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
EPA Eastern and Southern Africa

Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
EU Market Access Regulation (EPA) · Cameroon, Côte d’Ivoire, Ghana, Kenya

Semi-manufactures and articles of plastics; except for headings Nos ex3916, ex3917, ex3920 and ex3921, for which the rules are set out below:
– Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of any materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
– Other:
– – Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product; the value of any materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
– – Other / or: Manufacture in which the value of any materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [18] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
Foils of plastic, metallised / or: Manufacture from highly transparent polyester foils with a thickness of less than 23 micron [19] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
EPA Pacific · Fiji, Papua New Guinea, Samoa, Solomon Islands

Foils of plastic, metallized / or: Manufacture from highly transparent polyester foils with a thickness of less than 23 micron [18] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
Generalised Scheme of Preferences (GSP, GSP+, EBA) · Armenia, India, Kenya, Pakistan, Samoa, Solomon Islands, Syria, Vietnam

Foils of plastic, metallised / or: (a) LDCs Manufacture from highly-transparent polyester-foils with a thickness of less than 23 micron [24] or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product / or: (b) Other beneficiary countries Manufacture from highly-transparent polyester-foils with a thickness of less than 23 micron [25] or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product [22] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [23] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [24] The following foils shall be considered as highly transparent: foils, the optical dimming of which, measured according to ASTM-D 1003-16 by Gardner Hazemeter (i.e. Hazefactor), is less than 2 %. / or: [25] The following foils shall be considered as highly transparent: foils, the optical dimming of which, measured according to ASTM-D 1003-16 by Gardner Hazemeter (i.e. Hazefactor), is less than 2 %.
EU-Israel Association Agreement · Israel

Foils of plastic, metallised / or: Manufacture from highly transparent polyester foils with a thickness of less than 23 micron [28] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
EU-Jordan Association Agreement · Jordan

Semi-manufactures and articles of plastics; except for headings ex 3916, ex 3917, ex 3920 and ex 3921, for which the rules are set out below: - Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product - Other: - - Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [16] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product - - Other / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
Foils of plastic, metallised / or: Manufacture from highly-transparent polyester-foils with a thickness of less than 23 micron [18] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
EU-Jordan Association Agreement (relaxed rules, 2016) · Jordan

Foils of plastic, metallised / or: Manufacture from highly-transparent polyester-foils with a thickness of less than 23 micron [7] or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product [7] The following foils shall be considered as highly transparent: foils, the optical dimming of which, measured according to ASTM-D 1003-16 by Gardner Hazemeter (i.e. Hazefactor), is less than 2 %.
EU-Japan EPA · Japan

CTH; MaxNOM 50 % (EXW); or RVC 55 % (FOB).
EU-Korea FTA · South Korea

Plastics in primary forms, waste, parings and scrap, of plastic; semi-manufactures and articles of plastics / or: Manufacture from materials of any heading, except that of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
EU-Central America Association Agreement

Articles of plastics / or: Manufacture from materials of any heading, except that of the product / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
EU-Lebanon Association Agreement · Lebanon

Semi-manufactures and articles of plastics; except for headings ex3916, ex3917, ex3920 and ex3921, for which the rules are set out below:
– Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
– Other:
– – Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [16] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
– – Other / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
Foils of plastic, metallised / or: Manufacture from highly-transparent polyester-foils with a thickness of less than 23 micron [18] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
EU-Mexico Global Agreement · Mexico

Semi-manufactures and articles of plastics; except for headings Nos ex39 16, ex39 17, ex39 20 and ex39 21, for which the rules are set out below: — Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which all the materials used are classified within a Chapter other than Chapter 39. However, materials classified within Chapter 39 may be used, provided their value does not exceed 50 % of the ex-works price of the product [23] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product — Other: — — Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, the value of any materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [24] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product — — Other / or: Manufacture in which all the materials used are classified within a Chapter other than Chapter 39. However, materials classified within Chapter 39 may be used, provided their value does not exceed 20 % of the ex-works price of the product [25] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
Foils of plastic, metallised / or: Manufacture from highly transparent polyester foils with a thickness of less than 23 micron [26] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
EU-Palestine Interim Association Agreement · Palestine

Semi-manufactures and articles of plastics; except for headings Nos ex 3916, ex 3917, ex 3920 and ex 3921, for which the rules are set out below: - Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked - Other: / or: Manufacture in which the value of any materials of Chapter 39 used does not exceed 50% of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product -- Addition homopolymerization products in which a single monomer contributes more than 99% by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50% of the ex-works price of the product; the value of any materials of Chapter 39 used does not exceed 20% of the ex-works price of the product [1] / or: Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product -- Other / or: Manufacture in which the value of any materials of Chapter 39 used does not exceed 20% of the ex-works price of the product 1 / or: Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product
Foils of plastic, metallized / or: Manufacture from highly transparent polyester foils with a thickness of less than 23 micron [1] / or: Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product
EPA SADC · South Africa

Foils of plastic, metallised / or: Manufacture from highly transparent polyester foils with a thickness of less than 23 micron [23] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex–works price of the product
EU-Singapore FTA · Singapore

Manufacture from materials of any heading, except that of the product. However materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-work price of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product [21] In the case of the products composed of materials classified within both headings 3901 to 3906, and in the case of the products within headings 3907 to 3911, this restriction only applies to that group of materials which predominates by weight in the product.
EU-Tunisia Association Agreement · Tunisia

Semi-manufactures and articles of plastics; except for headings ex 3916, ex 3917, ex 3920 and ex 3921, for which the rules are set out below: Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [16] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [17] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
Foils of plastic, metallised / or: Manufacture from highly-transparent polyester-foils with a thickness of less than 23 micron [18] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

Source: European Commission, Access2Markets (CC BY 4.0, shortened). The text of the agreement prevails. Access2Markets

Legal and explanatory notes for 3921120000

3921 CN Explanatory Notes: Other plates, sheets, film, foil and strip, of plastics

See the explanatory note to heading 3920. See the explanatory note to subheading 8507 90 31.

Notes to chapter 39

Notes 1. Throughout the nomenclature, the expression ‘plastics’ means those materials of headings 3901 to 3914 which are or have been capable, either at the moment of polymerisation or at some subsequent stage, of being formed under external influence (usually heat and pressure, if necessary with a solvent or plasticiser) by moulding, casting, extruding, rolling or other process into shapes which are retained on the removal of the external influence. Throughout the nomenclature, any reference to ‘plastics’ also includes vulcanised fibre. The expression, however, does not apply to materials regarded as textile materials of Section XI. 2. This chapter does not cover: (a) lubricating preparations of heading 2710 or 3403; (b) waxes of heading 2712 or 3404; (c) separate chemically defined organic compounds (Chapter 29); (d) heparin or its salts (heading 3001); (e) solutions (other than collodions) consisting of any of the products specified in headings 3901 to 3913 in volatile organic solvents when the weight of the solvent exceeds 50 % of the weight of the solution (heading 3208); stamping foils of heading 3212; (f) organic surface-active agents or preparations of heading 3402; (g) run gums or ester gums (heading 3806); (h) prepared additives for mineral oils (including gasoline) or for other liquids used for the same purposes as mineral oils (heading 3811); (ij) prepared hydraulic fluids based on polyglycols, silicones or other polymers of Chapter 39 (heading 3819); (k) diagnostic or laboratory reagents on a backing of plastics (heading 3822); (l) synthetic rubber, as defined for the purposes of Chapter 40, or articles thereof; (m) saddlery or harness (heading 4201) or trunks, suitcases, handbags or other containers of heading 4202; (n) plaits, wickerwork or other articles of Chapter 46; (o) wallcoverings of heading 4814; (p) goods of Section XI (textiles and textile articles); (q) articles of Section XII (for example, footwear, headgear, umbrellas, sun umbrellas, walking sticks, whips, riding-crops or parts thereof); (r) imitation jewellery of heading 7117; (s) articles of Section XVI (machines and mechanical or electrical appliances); (t) parts of aircraft or vehicles of Section XVII; (u) articles of Chapter 90 (for example, optical elements, spectacle frames, drawing instruments); (v) articles of Chapter 91 (for example, clock or watch cases); (w) articles of Chapter 92 (for example, musical instruments or parts thereof); (x) articles of Chapter 94 (for example, furniture, luminaires and lighting fittings, illuminated signs, prefabricated buildings); (y) articles of Chapter 95 (for example, toys, games, sports requisites); or (z) articles of Chapter 96 (for example, brushes, buttons, slide fasteners, combs, mouthpieces or stems for smoking pipes, cigarette-holders or the like, parts of vacuum flasks or the like, pens, propelling pencils, and monopods, bipods, tripods and similar articles). 3. Headings 3901 to 3911 apply only to goods of a kind produced by chemical synthesis, falling in the following categories: (a) liquid synthetic polyolefins of which less than 60 % by volume distils at 300 °C, after conversion to 1 013 mbar when a reduced-pressure distillation method is used (headings 3901 and 3902); (b) resins, not highly polymerised, of the coumarone-indene type (heading 3911); (c) other synthetic polymers with an average of at least five monomer units; (d) silicones (heading 3910); (e) resols (heading 3909) and other prepolymers. 4. The expression ‘copolymers’ covers all polymers in which no single monomer unit contributes 95 % or more by weight to the total polymer content. For the purposes of this chapter, except where the context otherwise requires, copolymers (including co-polycondensates, co-polyaddition products, block copolymers and graft copolymers) and polymer blends are to be classified in the heading covering polymers of that comonomer unit which predominates by weight over every other single comonomer unit. For the purposes of this note, constituent comonomer units of polymers falling in the same heading shall be taken together. If no single comonomer unit predominates, copolymers or polymer blends, as the case may be, are to be classified in the heading which occurs last in numerical order among those which equally merit consideration. 5. Chemically modified polymers, that is those in which only appendages to the main polymer chain have been changed by chemical reaction, are to be classified in the heading appropriate to the unmodified polymer. This provision does not apply to graft copolymers. 6. In headings 3901 to 3914, the expression ‘primary forms’ applies only to the following forms: (a) liquids and pastes, including dispersions (emulsions and suspensions) and solutions; (b) blocks of irregular shape, lumps, powders (including moulding powders), granules, flakes and similar bulk forms. 7. Heading 3915 does not apply to waste, parings and scrap of a single thermoplastic material, transformed into primary forms (headings 3901 to 3914). 8. For the purposes of heading 3917, the expression ‘tubes, pipes and hoses’ means hollow products, whether semi-manufactured or finished products, of a kind generally used for conveying, conducting or distributing gases or liquids (for example, ribbed garden hose, perforated tubes). This expression also includes sausage casings and other lay-flat tubing. However, except for the last mentioned, those having an internal cross-section other than round, oval, rectangular (in which the length does not exceed one-and-a-half times the width) or in the shape of a regular polygon are not to be regarded as tubes, pipes and hoses but as profile shapes. 9. For the purposes of heading 3918, the expression ‘wall or ceiling coverings of plastics’ applies to products in rolls, of a width not less than 45 cm, suitable for wall or ceiling decoration, consisting of plastics fixed permanently on a backing of any material other than paper, the layer of plastics (on the face side) being grained, embossed, coloured, design-printed or otherwise decorated. 10. In headings 3920 and 3921, the expression ‘plates, sheets, film, foil and strip’ applies only to plates, sheets, film, foil and strip (other than those of Chapter 54) and to blocks of regular geometric shape, whether or not printed or otherwise surface-worked, uncut or cut into rectangles (including squares) but not further worked (even if when so cut they become articles ready for use). 11. Heading 3925 applies only to the following articles, not being products covered by any of the earlier headings of sub-chapter II: (a) reservoirs, tanks (including septic tanks), vats and similar containers, of a capacity exceeding 300 litres; (b) structural elements used, for example, in floors, walls or partitions, ceilings or roofs; (c) gutters and fittings therefor; (d) doors, windows and their frames and thresholds for doors; (e) balconies, balustrades, fencing, gates and similar barriers; (f) shutters, blinds (including venetian blinds) and similar articles and parts and fittings thereof; (g) large-scale shelving for assembly and permanent installation, for example, in shops, workshops, warehouses; (h) ornamental architectural features, for example, flutings, cupolas, dovecotes; and (ij) fittings and mountings intended for permanent installation in or on doors, windows, staircases, walls or other parts of buildings, for example, knobs, handles, hooks, brackets, towel rails, switch-plates and other protective plates. Subheading notes 1. Within any one heading of this chapter, polymers (including copolymers) and chemically modified polymers are to be classified according to the following provisions: (a) where there is a subheading named ‘Other’ in the same series: (1) the designation in a subheading of a polymer by the prefix ‘poly’ (for example, polyethylene and polyamide-6,6) means that the constituent monomer unit or monomer units of the named polymer taken together must contribute 95 % or more by weight of the total polymer content; (2) the copolymers named in subheadings 3901 30, 3901 40, 3903 20, 3903 30 and 3904 30 are to be classified in those subheadings, provided that the comonomer units of the named copolymers contribute 95 % or more by weight of the total polymer content; (3) chemically modified polymers are to be classified in the subheading named ‘Other’, provided that the chemically modified polymers are not more specifically covered by another subheading; (4) polymers not meeting (1), (2) or (3) above, are to be classified in the subheading, among the remaining subheadings in the series, covering polymers of that monomer unit which predominates by weight over every other single comonomer unit. For this purpose, constituent monomer units of polymers falling in the same subheading shall be taken together. Only the constituent comonomer units of the polymers in the series of subheadings under consideration are to be compared; (b) where there is no subheading named ‘Other’ in the same series: (1) polymers are to be classified in the subheading covering polymers of that monomer unit which predominates by weight over every other single comonomer unit. For this purpose, constituent monomer units of polymers falling in the same subheading shall be taken together. Only the constituent comonomer units of the polymers in the series under consideration are to be compared; (2) chemically modified polymers are to be classified in the subheading appropriate to the unmodified polymer. Polymer blends are to be classified in the same subheading as polymers of the same monomer units in the same proportions. 2. For the purposes of subheading 3920 43, the term ‘plasticisers’ includes secondary plasticisers. Additional note 1. Where the woven, knitted or crocheted fabrics, felt or nonwovens are present merely for reinforcing purposes, gloves, mittens or mitts impregnated, coated or covered with cellular plastics belong to Chapter 39, even if they are: — made up from woven, knitted or crocheted fabrics (other than those of heading 5903), felt or nonwovens impregnated, coated or covered with cellular plastics, or — made up from unimpregnated, uncoated or uncovered woven, knitted or crocheted fabrics, felt or nonwovens and subsequently impregnated, coated or covered with cellular plastics. (Note 3(c) to Chapter 56 and note 2(a)(5) to Chapter 59).

Notes to section VII

PLASTICS AND ARTICLES THEREOF; RUBBER AND ARTICLES THEREOF Notes 1. Goods put up in sets consisting of two or more separate constituents, some or all of which fall in this section and are intended to be mixed together to obtain a product of Section VI or VII, are to be classified in the heading appropriate to that product, provided that the constituents are: (a) having regard to the manner in which they are put up, clearly identifiable as being intended to be used together without first being repacked; (b) presented together; and (c) identifiable, whether by their nature or by the relative proportions in which they are present, as being complementary one to another. 2. Except for the goods of heading 3918 or 3919, plastics, rubber, and articles thereof, printed with motifs, characters or pictorial representations, which are not merely subsidiary to the primary use of the goods, fall in Chapter 49.

Other explanatory notes for the chapter

General The HS Explanatory Note to Chapter 39, General, ‘Combinations of plastics and materials other than textiles’, point (d), applies, mutatis mutandis, to combinations of carbon fibres and plastics.

Note 4 Calculation of mass ratios of monomer units in copolymers: The mass ratios of the respective monomer units in copolymer chains are calculated based on the molecular structure of the copolymer (not the starting materials), taking into account the formation reaction of the polymer. When applicable, the atom linking two adjacent monomer units is attributed to the monomer unit from which the atom originates. The following examples illustrate the calculation of the monomer unit content in copolymers: — In poly(ethylene terephthalate), which is a polyester comprised of terephthalic acid and ethylene glycol moieties, both alcoholic oxygens are attributed to the glycol monomer unit. Hence, ethylene glycol is calculated as C2H4O2, and terephthalate is calculated as C8H4O2. — In polyamide-6,6, which is a polyamide comprised of hexamethylenediamine and adipic acid, both nitrogen atoms are attributed to the diamine monomer unit. Hence, hexamethylenediamine is calculated as C6H14N2 and adipic acid is calculated as C6H8O2.

Note 6 The term ‘solutions’, used both in this note and in note 4 to Chapter 32, does not apply to colloidal solutions.

Sources: Combined Nomenclature 2026, Annex I to Regulation (EEC) No 2658/87 (CELEX 32025R1926), and the Explanatory Notes to the Combined Nomenclature (CELEX 02019XC0329(02)-20260213). The section and chapter notes are legally binding; the explanatory notes are guidance. EUR-Lex

Restrictions and flags for 392112

Russia sanctions: import ban Regulation (EU) No 833/2014, Annex XXI 3921

Art. 3i, goods generating significant revenue for Russia
Read the act on EUR-Lex
Russia sanctions: export ban Regulation (EU) No 833/2014, Annex XXIII 3921

Art. 3k, goods contributing to Russian industrial capacity
Read the act on EUR-Lex

For orientation only. Check the act before you rely on a flag; thresholds, derogations and exceptions are not shown in full.

EU trade in 2025 for 392112

Extra-EU imports: €162.7M; 57,554 t
Extra-EU exports: €199.9M

Top origin countries by import value

China €48.3M
Türkiye €24M
Switzerland €19.8M
United Kingdom €17.9M
Costa Rica €14.9M

CN8 codes below this code: 1. Source: Eurostat, Comext, CC BY 4.0, processed by hscode.info. Confidential trade is not allocated to codes.

UK import duty for 392112

Third-country duties of all UK commodity codes under this HS subheading. Source: UK Department for Business and Trade, as of Nov 2, 2026. The UK tariff differs from the EU tariff.

Import VAT in the EU

Austria 20 %
Belgium 21 %
Bulgaria 20 %
Croatia 25 %
Cyprus 19 %
Czechia 21 %
Denmark 25 %
Estonia 24 % maybe 9 %
Finland 25.5 %
France 20 %
Germany 19 %
Greece 24 %
Hungary 27 %
Ireland 23 %
Italy 22 %
Latvia 21 %
Lithuania 21 %
Luxembourg 17 %
Malta 18 %
Netherlands 21 %
Poland 23 %
Portugal 23 %
Romania 21 %
Slovakia 23 %
Slovenia 22 %
Spain 21 %
Sweden 25 %

Standard rate per member state, on the customs value, the duty and transport to the destination. Reduced rates often depend on the use or the buyer and apply only where the country provides them for these goods. Source: European Commission, Taxes in Europe Database, as of Nov 2, 2026.

Rules of origin

Preferential rules of origin for subheading 392112 depend on the trade agreement. The Commission publishes them in Access2Markets.

Rules of origin on Access2Markets

Information

When importing or exporting "Of polymers of vinyl chloride", it is crucial to have the correct HS code or TARIC code. The HS code 3921120000 80 serves as the standard code for this product, ensuring that the appropriate duties and taxes are applied when crossing international borders.

To ensure your business transactions run smoothly when importing or exporting "Of polymers of vinyl chloride", consider the following points:

Inform yourself about the specific import and export regulations in the countries involved. This includes possible restrictions, taxes, and duties applicable to "Of polymers of vinyl chloride".
Check if any additional licenses, permits, or certificates are required to import "Of polymers of vinyl chloride" into the destination country or export it from the country of origin.
Make sure your trading partners have valid identification numbers, such as EORI numbers (Economic Operators Registration and Identification) in the EU, to streamline trade and minimize delays.
Ensure that all trade- and customs-related documents (such as commercial invoices, packing lists, certificates of origin, and insurance policies) are accurately completed and adhere to the respective national regulations.
Keep an eye on the current exchange rates, as well as packaging, shipping, and insurance costs, to accurately calculate trade costs.

In summary, the HS code or TARIC code for "Of polymers of vinyl chloride" is 3921120000 80. Make sure you accurately use this code in all your trade and customs documents to guarantee smooth and hassle-free transactions. With these tips, you'll be better prepared for the challenges of international trade and can successfully import and export "Of polymers of vinyl chloride".

HS Code structure

1. Chapter

There are 21 different sections, which are divided into 96 chapters. Exceptional chapters include chapter 77, which is reserved for future use, chapters 98 and 99, which are limited at national level, and chapter 99, which is a specific code for temporary changes. In the example above, chapter 39 was selected for plastics and articles thereof

2. Heading

The heading determines the specific category within a certain chapter. In the example above, the 21 refers to Other plates, sheets, film, foil and strip, of plastics.

3. Subheading

The last two digits of the international harmonized code are more specific and define subcategories of products. In the example above, the 12 refers to Of polymers of vinyl chloride.

HS Code tree structure

3900000000 80

Chapter PLASTICS AND ARTICLES THEREOF

3921000000 80

Other plates, sheets, film, foil and strip, of plastics

3921110000 10

- Cellular

3921110000 80

- - Of polymers of styrene

3921110010 80

- - - Acrylonitrile butadiene styrene, for use in certain types of aircraft

3921110090 80

- - - Other

3921120000 80

- - Of polymers of vinyl chloride

3921120020 80

- - - For use in certain types of aircraft

3921120090 80

- - - Other

3921130000 80

- - Of polyurethanes

3921131000 80

- - - Flexible

3921139000 80

- - - Other

3921140000 80

- - Of regenerated cellulose

3921140020 80

- - - Cellular block of regenerated cellulose, impregnated with water containing magnesium chloride and quaternary ammonium compounds, measuring 100 cm (± 10 cm) × 100 cm (± 10 cm) × 40 cm (± 5 cm)

3921140080 80

- - - Other

3921190000 80

- - Of other plastics

3921190010 80

- - - For use in certain types of aircraft

3921190030 10

- - - Other

3921190030 80

- - - - Blocks with cellular structure, containing by weight: - polyamide-6 or poly(epoxy anhydride) - 7 % or more but not more than 9 % of polytetrafluorethylene if present - 10 % or more but not more than 25 % of inorganic fillers

3921190050 80

- - - - Porous membrane of polytetrafluorethylene (PTFE) laminated to a polyester spunbonded non-woven cloth with - a total thickness of more than 0,05 mm but not more than 0,20 mm, - a water entry pressure between 5 and 200 kPa according to ISO 811, and - an air permeability of 0,08 cm$3/cm$2/s or more according to ISO 5636-5

3921190053 80

- - - - Sheets of closed-cell silicone foam with: -a thickness of 2,0 mm or more but not more than 4,8 mm, -a thermal insulation of more than 0,25 Km²/W but not more than 0,4 Km²/W (according to ASTM-C518) -a dielectric strength of more than 3,0 Kv/mm but not more than 3,8 Kv/mm (according to ASTM- D149)

3921190055 80

- - - - Strip of microporous polytetrafluoroethylene on a support of a non-woven -wound on a roll on a core of 3 inches, -with a width of 69.5mm, 40.8mm, 36.5mm, 20mm, 13.5mm or 10mm for use in the manufacture of filters for kidney dialysis equipment and intravenous application

3921190065 80

- - - - Transparent, microporous, acrylic acid grafted polyethylene film, in the form of rolls, for the manufacture of alkaline battery separators with: -a width of 98 mm or more but not more than 170 mm, -a thickness of 15 μm or more but not more than 36 μm,

3921190075 80

- - - - Microporous monolayer film of polypropylene or a microporous trilayer film of polypropylene, polyethylene and polypropylene, each film with: -zero transversal production direction (TD) shrinkage, -a total thickness of 8 μm or more, but not more than 40 μm, -a width of 15 mm or more, but not more than 900 mm, -a length of more than 200 m, but not more than 8 000 m, -an average pore size between 0,02 μm and 0,1 μm, -whether or not laminated with a Polypropylene non-woven mat of 50 to 200 µm thickness, -whether or not coated with surfactant, -whether or not coated on 1 or 2 sides with a ceramic layer of min 1 μm thickness or more, but not more than 5 μm, -whether or not coated on 1 or 2 sides with a sticky binder, PVdF type or similar of min 0,5 μm thickness or more, but not more than 5 μm

3921190095 80

- - - - Film of polyethersulfone, of a thickness of not more than 200 µm

3921190099 80

- - - - Other

3921900000 80

- Other

3921901000 10

- - Of condensation or rearrangement polymerisation products, whether or not chemically modified

3921901000 80

- - - Of polyesters

3921901005 80

- - - - Corrugated sheet and plates

3921901010 80

- - - - Composite plate of poly(ethylene terephthalate) or of poly(butylene terephthalate), reinforced with glass fibres

3921901030 80

- - - - Multilayer film consisting of: - a poly(ethylene terephthalate) film with a thickness of more than 100 µm but not more than 150 µm, - a primer of phenolic material with a thickness of more than 8 µm but not more than 15 µm, - an adhesive layer of a synthetic rubber with a thickness of more than 20 µm but not more than 30 µm, - and a transparent poly(ethylene terephthalate) liner with a thickness of more than 35 µm but not more than 40 µm

3921901090 80

- - - - Other

3921903000 80

- - - Of phenolic resins

3921904100 10

- - - Of amino-resins

3921904100 20

- - - - Laminated

3921904100 80

- - - - - High-pressure laminates with a decorative surface on one or both sides

3921904300 80

- - - - - Other

3921904900 80

- - - - Other

3921905500 80

- - - Other

3921905525 80

- - - - Prepreg sheets or rolls containing polyimide resin

3921905535 80

- - - - Glass fibre impregnated with epoxy resin for use in the manufacture of smart cards

3921905540 80

- - - - Three layered fabric sheet, in rolls, - comprising a core layer of 100 % Nylon Taffeta or Nylon/Polyester blended Taffeta, - coated on both sides with polyamide , - of a total thickness not more than 135 μm, - of a total weight not more than 80 g/m$2

3921905570 80

- - - - Membrane composed of a polyamide layer and a polysulfone layer on a polyethylene terephthalate support layer with: -a total thickness of 0,25 mm or more but not more than 0,40 mm, -a total weight of 109 g/m² or more but not more than 114 g/m²

3921905590 80

- - - - Other

3921906000 80

- - Of addition polymerisation products

3921906010 80

- - - For use in certain types of aircraft

3921906090 80

- - - Other

3921909000 80

- - Other

Tariff number 3921120000 80 - Of polymers of vinyl chloride

Import trade restrictions for 3921120000 80

Explanation of trade restrictions

Estimate the import cost for 392112

Export measures for 3921120000

History

Preferential rules of origin for 3921120000

Legal and explanatory notes for 3921120000

Restrictions and flags for 392112

EU trade in 2025 for 392112

Top origin countries by import value

UK import duty for 392112

Import VAT in the EU

Rules of origin

Information

HS Code structure

1. Chapter

2. Heading

3. Subheading

HS Code tree structure