Import trade restrictions for 3923290000 80
Duties for more codes with a free account
You have looked at the duties of 10 codes today. Sign up free to see duties, measures and history for every code.
Preferential rules of origin for 3923290000
What the goods must meet to count as originating in a partner country and get the preferential duty, per agreement.
Autonomous Trade Preferences (Western Balkans) · Kosovo
EU-Algeria Association Agreement · Algeria
EU-Egypt Association Agreement · Egypt
EU-Jordan Association Agreement · Jordan
EU-Lebanon Association Agreement · Lebanon
EU-Morocco Association Agreement · Morocco
EU-Tunisia Association Agreement · Tunisia
Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product [13] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [14] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [15] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [16] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [17] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [18] The following foils shall be considered as highly transparent: foils, the optical dimming of which, measured according to ASTM-D 1003-16 by Gardner Hazemeter (i.e. Hazefactor), is less than 2 %.
EEA/EFTA agreements (Switzerland, Norway, Liechtenstein, Faroe Islands) · Faroe Islands, Liechtenstein, Norway, Switzerland
EU-Iceland FTA · Iceland
EU-Ukraine DCFTA · Ukraine
Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product [13] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [18] The following foils shall be considered as highly transparent: foils, the optical dimming of which, measured according to ASTM-D 1003-16 by Gardner Hazemeter (i.e. Hazefactor), is less than 2 %.
EPA CARIFORUM
EU-Korea FTA · South Korea
Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
EU-Canada CETA · Canada
A change from any other heading.
EU-Chile Association Agreement · Chile
Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product [13] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [14] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [15] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [16] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [17] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [18] The following foils shall be considered as highly transparent: foils, the optical dimming of which, measured according to ASTM-D 1003—16 by Gardner Hazemeter (i.e. Hazefactor), is less than 2 %.
EU-Colombia/Peru/Ecuador Trade Agreement · Colombia, Ecuador, Peru
Plastics and articles thereof / or: Manufacture from materials of any heading, except that of the product / or: Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product
EPA Eastern and Southern Africa
Rubber and articles thereof; except for: / or: Manufacture in which all the materials used are classified within a heading other than that of the product [13] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [18] The following foils shall be considered as highly transparent: foils, the optical dimming of which – measured according to ASTM-D 1003-16 by Gardner Hazemeter (i.e. Hazefactor) – is less than 2 per cent.
EU Market Access Regulation (EPA) · Cameroon, Côte d’Ivoire, Ghana, Kenya
Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product [16] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [17] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [18] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [19] The following foils shall be considered as highly transparent: foils, the optical dimming of which - measured according to ASTM-D 1003-16 by Gardner Hazemeter (i.e. Hazefactor) - is less than 2 percent.
EPA Pacific · Fiji, Papua New Guinea, Samoa, Solomon Islands
Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product [13] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [18] The following foils shall be considered as highly transparent: foils, the optical dimming of which - measured according to ASTM-D 1003-16 by Gardner Hazemeter (i.e. Hazefactor) - is less than 2 %.
EU-Georgia DCFTA · Georgia
Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product [15] Note 3 to Chapter 32 says that these preparations are those of a kind used for colouring any material or used as ingredients in the manufacture of colouring preparations, provided that they are not classified in another heading in Chapter 32. / or: [20] A ‘group’ is regarded as any part of the heading separated from the rest by a semicolon.
Generalised Scheme of Preferences (GSP, GSP+, EBA) · Armenia, India, Kenya, Pakistan, Samoa, Solomon Islands, Syria, Vietnam
Plastics and articles thereof; except for: / or: (a) LDCs Manufacture from materials of any heading, except that of the product. or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product / or: (b) Other beneficiary countries Manufacture from materials of any heading, except that of the product. or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
EU-Israel Association Agreement · Israel
Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product [22] In the case of the products composed of materials classified both within heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [24] In the case of the products composed of materials classified both within heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [25] In the case of the products composed of materials classified both within heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [28] The following foils shall be considered as highly transparent: foils, the optical dimming of which, measured according to ASTM-D 1003-16 by Gardner Hazemeter (Hazefactor), is less than 2 %.
EU-Japan EPA · Japan
CTH; MaxNOM 50 % (EXW); or RVC 55 % (FOB).
EU-Central America Association Agreement
Articles of plastics / or: Manufacture from materials of any heading, except that of the product / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
EU-Moldova DCFTA · Moldova
Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product [20] The following foils shall be considered as highly transparent: foils, the optical dimming of which, measured according to ASTM-D 1003-16 by Gardner Hazemeter (i.e. Hazefactor), is less than 2 %.
EU-Mexico Global Agreement · Mexico
Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product [15] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [16] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [17] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [18] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [19] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [20] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [21] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [22] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [23] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [24] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [25] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [26] The following foils shall be considered as highly transparent: foils, the optical dimming of which - measured according to ASTM-D 1003-16 by Gardner Hazemeter (i.e. Hazefactor) - is less than 2 %.
Pan-Euro-Mediterranean (PEM) Convention · Albania, Andorra, Bosnia & Herzegovina, Egypt, Faroe Islands, Iceland, Kosovo, Liechtenstein, Montenegro, North Macedonia, Norway, Palestine, Switzerland, Türkiye
Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product [15] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within heading 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [20] The following foils shall be considered as highly transparent: foils, the optical dimming of which, measured according to ASTM-D 1003-16 by Gardner Hazemeter (i.e. Hazefactor), is less than 2%.
EU-Palestine Interim Association Agreement · Palestine
Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product [1] In the case of the products composed of materials classified within both heading Nos. 3901 to 3906, on the one hand, and within heading Nos. 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [1] The following foils shall be considered as highly transparent: foils, the optical dimming of which - measured according to ASTM-D 1003-16 by Gardner Hazemeter (i.e. Hazefactor) - is less than 2 percent.
EPA SADC · South Africa
Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex–works price of the product [18] In the case of the products composed of materials classified both within heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to the group of materials which predominates by weight in the product. / or: [19] In the case of the products composed of materials classified both within heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to the group of materials which predominates by weight in the product. / or: [21] In the case of the products composed of materials classified both within heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to the group of materials which predominates by weight in the product. / or: [23] The following foils shall be considered as highly transparent: foils, the optical dimming of which — measured according to ASTM-D 1003-16 by Gardener Hazemeter (i.e. Hazefactor) — is less than 2 percent.
EU-Singapore FTA · Singapore
Plastics and articles thereof: except for: / or: Manufacture from materials of any heading, except that of the product. However materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-work price of the product or Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
Source: European Commission, Access2Markets (CC BY 4.0, shortened). The text of the agreement prevails. Access2Markets
Legal and explanatory notes for 3923290000
Notes to chapter 39
Notes 1. Throughout the nomenclature, the expression ‘plastics’ means those materials of headings 3901 to 3914 which are or have been capable, either at the moment of polymerisation or at some subsequent stage, of being formed under external influence (usually heat and pressure, if necessary with a solvent or plasticiser) by moulding, casting, extruding, rolling or other process into shapes which are retained on the removal of the external influence. Throughout the nomenclature, any reference to ‘plastics’ also includes vulcanised fibre. The expression, however, does not apply to materials regarded as textile materials of Section XI. 2. This chapter does not cover: (a) lubricating preparations of heading 2710 or 3403; (b) waxes of heading 2712 or 3404; (c) separate chemically defined organic compounds (Chapter 29); (d) heparin or its salts (heading 3001); (e) solutions (other than collodions) consisting of any of the products specified in headings 3901 to 3913 in volatile organic solvents when the weight of the solvent exceeds 50 % of the weight of the solution (heading 3208); stamping foils of heading 3212; (f) organic surface-active agents or preparations of heading 3402; (g) run gums or ester gums (heading 3806); (h) prepared additives for mineral oils (including gasoline) or for other liquids used for the same purposes as mineral oils (heading 3811); (ij) prepared hydraulic fluids based on polyglycols, silicones or other polymers of Chapter 39 (heading 3819); (k) diagnostic or laboratory reagents on a backing of plastics (heading 3822); (l) synthetic rubber, as defined for the purposes of Chapter 40, or articles thereof; (m) saddlery or harness (heading 4201) or trunks, suitcases, handbags or other containers of heading 4202; (n) plaits, wickerwork or other articles of Chapter 46; (o) wallcoverings of heading 4814; (p) goods of Section XI (textiles and textile articles); (q) articles of Section XII (for example, footwear, headgear, umbrellas, sun umbrellas, walking sticks, whips, riding-crops or parts thereof); (r) imitation jewellery of heading 7117; (s) articles of Section XVI (machines and mechanical or electrical appliances); (t) parts of aircraft or vehicles of Section XVII; (u) articles of Chapter 90 (for example, optical elements, spectacle frames, drawing instruments); (v) articles of Chapter 91 (for example, clock or watch cases); (w) articles of Chapter 92 (for example, musical instruments or parts thereof); (x) articles of Chapter 94 (for example, furniture, luminaires and lighting fittings, illuminated signs, prefabricated buildings); (y) articles of Chapter 95 (for example, toys, games, sports requisites); or (z) articles of Chapter 96 (for example, brushes, buttons, slide fasteners, combs, mouthpieces or stems for smoking pipes, cigarette-holders or the like, parts of vacuum flasks or the like, pens, propelling pencils, and monopods, bipods, tripods and similar articles). 3. Headings 3901 to 3911 apply only to goods of a kind produced by chemical synthesis, falling in the following categories: (a) liquid synthetic polyolefins of which less than 60 % by volume distils at 300 °C, after conversion to 1 013 mbar when a reduced-pressure distillation method is used (headings 3901 and 3902); (b) resins, not highly polymerised, of the coumarone-indene type (heading 3911); (c) other synthetic polymers with an average of at least five monomer units; (d) silicones (heading 3910); (e) resols (heading 3909) and other prepolymers. 4. The expression ‘copolymers’ covers all polymers in which no single monomer unit contributes 95 % or more by weight to the total polymer content. For the purposes of this chapter, except where the context otherwise requires, copolymers (including co-polycondensates, co-polyaddition products, block copolymers and graft copolymers) and polymer blends are to be classified in the heading covering polymers of that comonomer unit which predominates by weight over every other single comonomer unit. For the purposes of this note, constituent comonomer units of polymers falling in the same heading shall be taken together. If no single comonomer unit predominates, copolymers or polymer blends, as the case may be, are to be classified in the heading which occurs last in numerical order among those which equally merit consideration. 5. Chemically modified polymers, that is those in which only appendages to the main polymer chain have been changed by chemical reaction, are to be classified in the heading appropriate to the unmodified polymer. This provision does not apply to graft copolymers. 6. In headings 3901 to 3914, the expression ‘primary forms’ applies only to the following forms: (a) liquids and pastes, including dispersions (emulsions and suspensions) and solutions; (b) blocks of irregular shape, lumps, powders (including moulding powders), granules, flakes and similar bulk forms. 7. Heading 3915 does not apply to waste, parings and scrap of a single thermoplastic material, transformed into primary forms (headings 3901 to 3914). 8. For the purposes of heading 3917, the expression ‘tubes, pipes and hoses’ means hollow products, whether semi-manufactured or finished products, of a kind generally used for conveying, conducting or distributing gases or liquids (for example, ribbed garden hose, perforated tubes). This expression also includes sausage casings and other lay-flat tubing. However, except for the last mentioned, those having an internal cross-section other than round, oval, rectangular (in which the length does not exceed one-and-a-half times the width) or in the shape of a regular polygon are not to be regarded as tubes, pipes and hoses but as profile shapes. 9. For the purposes of heading 3918, the expression ‘wall or ceiling coverings of plastics’ applies to products in rolls, of a width not less than 45 cm, suitable for wall or ceiling decoration, consisting of plastics fixed permanently on a backing of any material other than paper, the layer of plastics (on the face side) being grained, embossed, coloured, design-printed or otherwise decorated. 10. In headings 3920 and 3921, the expression ‘plates, sheets, film, foil and strip’ applies only to plates, sheets, film, foil and strip (other than those of Chapter 54) and to blocks of regular geometric shape, whether or not printed or otherwise surface-worked, uncut or cut into rectangles (including squares) but not further worked (even if when so cut they become articles ready for use). 11. Heading 3925 applies only to the following articles, not being products covered by any of the earlier headings of sub-chapter II: (a) reservoirs, tanks (including septic tanks), vats and similar containers, of a capacity exceeding 300 litres; (b) structural elements used, for example, in floors, walls or partitions, ceilings or roofs; (c) gutters and fittings therefor; (d) doors, windows and their frames and thresholds for doors; (e) balconies, balustrades, fencing, gates and similar barriers; (f) shutters, blinds (including venetian blinds) and similar articles and parts and fittings thereof; (g) large-scale shelving for assembly and permanent installation, for example, in shops, workshops, warehouses; (h) ornamental architectural features, for example, flutings, cupolas, dovecotes; and (ij) fittings and mountings intended for permanent installation in or on doors, windows, staircases, walls or other parts of buildings, for example, knobs, handles, hooks, brackets, towel rails, switch-plates and other protective plates. Subheading notes 1. Within any one heading of this chapter, polymers (including copolymers) and chemically modified polymers are to be classified according to the following provisions: (a) where there is a subheading named ‘Other’ in the same series: (1) the designation in a subheading of a polymer by the prefix ‘poly’ (for example, polyethylene and polyamide-6,6) means that the constituent monomer unit or monomer units of the named polymer taken together must contribute 95 % or more by weight of the total polymer content; (2) the copolymers named in subheadings 3901 30, 3901 40, 3903 20, 3903 30 and 3904 30 are to be classified in those subheadings, provided that the comonomer units of the named copolymers contribute 95 % or more by weight of the total polymer content; (3) chemically modified polymers are to be classified in the subheading named ‘Other’, provided that the chemically modified polymers are not more specifically covered by another subheading; (4) polymers not meeting (1), (2) or (3) above, are to be classified in the subheading, among the remaining subheadings in the series, covering polymers of that monomer unit which predominates by weight over every other single comonomer unit. For this purpose, constituent monomer units of polymers falling in the same subheading shall be taken together. Only the constituent comonomer units of the polymers in the series of subheadings under consideration are to be compared; (b) where there is no subheading named ‘Other’ in the same series: (1) polymers are to be classified in the subheading covering polymers of that monomer unit which predominates by weight over every other single comonomer unit. For this purpose, constituent monomer units of polymers falling in the same subheading shall be taken together. Only the constituent comonomer units of the polymers in the series under consideration are to be compared; (2) chemically modified polymers are to be classified in the subheading appropriate to the unmodified polymer. Polymer blends are to be classified in the same subheading as polymers of the same monomer units in the same proportions. 2. For the purposes of subheading 3920 43, the term ‘plasticisers’ includes secondary plasticisers. Additional note 1. Where the woven, knitted or crocheted fabrics, felt or nonwovens are present merely for reinforcing purposes, gloves, mittens or mitts impregnated, coated or covered with cellular plastics belong to Chapter 39, even if they are: — made up from woven, knitted or crocheted fabrics (other than those of heading 5903), felt or nonwovens impregnated, coated or covered with cellular plastics, or — made up from unimpregnated, uncoated or uncovered woven, knitted or crocheted fabrics, felt or nonwovens and subsequently impregnated, coated or covered with cellular plastics. (Note 3(c) to Chapter 56 and note 2(a)(5) to Chapter 59).
Notes to section VII
PLASTICS AND ARTICLES THEREOF; RUBBER AND ARTICLES THEREOF Notes 1. Goods put up in sets consisting of two or more separate constituents, some or all of which fall in this section and are intended to be mixed together to obtain a product of Section VI or VII, are to be classified in the heading appropriate to that product, provided that the constituents are: (a) having regard to the manner in which they are put up, clearly identifiable as being intended to be used together without first being repacked; (b) presented together; and (c) identifiable, whether by their nature or by the relative proportions in which they are present, as being complementary one to another. 2. Except for the goods of heading 3918 or 3919, plastics, rubber, and articles thereof, printed with motifs, characters or pictorial representations, which are not merely subsidiary to the primary use of the goods, fall in Chapter 49.
Other explanatory notes for the chapter
General The HS Explanatory Note to Chapter 39, General, ‘Combinations of plastics and materials other than textiles’, point (d), applies, mutatis mutandis, to combinations of carbon fibres and plastics.
Note 4 Calculation of mass ratios of monomer units in copolymers: The mass ratios of the respective monomer units in copolymer chains are calculated based on the molecular structure of the copolymer (not the starting materials), taking into account the formation reaction of the polymer. When applicable, the atom linking two adjacent monomer units is attributed to the monomer unit from which the atom originates. The following examples illustrate the calculation of the monomer unit content in copolymers: — In poly(ethylene terephthalate), which is a polyester comprised of terephthalic acid and ethylene glycol moieties, both alcoholic oxygens are attributed to the glycol monomer unit. Hence, ethylene glycol is calculated as C2H4O2, and terephthalate is calculated as C8H4O2. — In polyamide-6,6, which is a polyamide comprised of hexamethylenediamine and adipic acid, both nitrogen atoms are attributed to the diamine monomer unit. Hence, hexamethylenediamine is calculated as C6H14N2 and adipic acid is calculated as C6H8O2.
Note 6 The term ‘solutions’, used both in this note and in note 4 to Chapter 32, does not apply to colloidal solutions.
Sources: Combined Nomenclature 2026, Annex I to Regulation (EEC) No 2658/87 (CELEX 32025R1926), and the Explanatory Notes to the Combined Nomenclature (CELEX 02019XC0329(02)-20260213). The section and chapter notes are legally binding; the explanatory notes are guidance. EUR-Lex
UK advance tariff rulings for 3923290000
Rulings of HM Revenue & Customs for goods with UK commodity codes that start like this EU code. The UK tariff differs from the EU tariff, so these rulings are guidance for the EU.
- UK 3923291000 Valid Feb 2, 2026 to Feb 1, 2029 · Ruling 600014862 on GOV.UK
Faecal collection toilet bag materials: polyvinyl alcohol single use device The bags are packed in a containing bag, usually an OPP (Oriented Polypropylene bag)
Justification
Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 3923 - Articles for the conveyance or packing of goods, of plastics; stoppers, lids, caps and other closures, of plastics GIR 5b has been used to identify the type of packaging – containing bag, usually an OPP (Oriented Polypropylene bag) GIR 6 has been used to classify the goods to subheading level 392329 – Sacks and bags (including cones); Of other plastics 8 digit code 39232910 - Of poly(vinyl chloride) Also classified in accordance with: HSEN to 3923 chapter 42 note 3A
- UK 3923299000 Valid Mar 5, 2024 to Mar 4, 2027 · Ruling 600009749 on GOV.UK
Plastic bags, They are primarily used in conjunction with sand art project boards, to protect the child or adults artwork, and to contain the loose sand the finished picture is made of. They will also have other uses. Made from non durable Oriented Polypropylene (OPP) plastics at 40-micron thickness. They are a clear plastic with red printed arch design in each corner, with a self-seal strip made of PE300 acrylic glue, situated at the top opening. The sleeves are available in sizes A4 210 x 297 and A5 148 x 210. Packaged in cardboard boxes of A4 3,000 and A5 2,000 of packs of 1000’s then for export and retail sale.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 has been used to classify this product by the terms of heading 3923 Articles for the conveyance or packing of goods, of plastics, stoppers, lids, caps and other closures, of plastics. GIR 5b has been used to identify the type of packaging – cardboard boxes. GIR 6 has been used to classify the goods to subheading level: 392329 Of other plastics. 8-Digit code: 39232990 Other than Of poly(vinyl chloride) Also classified in accordance with: Chapter 39 note 1 Harmonized system explanatory notes (HSEN) to heading 39.23 (a) Combined Nomenclature Explanatory Note CNEN to heading: 3923
- UK 3923299000 Valid Oct 17, 2024 to Oct 16, 2027 · Ruling 600011449 on GOV.UK
A semi finished plastic bag. The item in its current state is akin to a sack. This is made of polypropylene. The item does not have handles. The item undergoes additional processing to have the handles stitched on. Once completed the bag will be used to transport fertiliser.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) Classification has been determined in accordance with the following: General Interpretative Rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 3923: Articles for the conveyance or packing of goods, of plastics; stoppers, lids, caps and other closures, of plastics GIR 6 has been used to classify this product by the terms of heading 392329: Sacks and bags (including cones),of other plastics 8 Digit code 39232990:Other than of poly(vinyl chloride) Also classified in accordance with: Chapter note 1 to heading 3923 Harmonised System Explanatory Notes to heading 3923
+ 9 more
- UK 3923299000 Valid Nov 28, 2024 to Nov 27, 2027 · Ruling 600011776 on GOV.UK
Plastic storage pouch. A plastic stand up pouch with an internal plastic zipper seal. The pouches begin as a white matte finish stand up pouch with a gusset, it has a tear notch to the top. The pouches will go on to be screen printed in colour with various product details, as required and dependent on the product. The pouches are used to store a range of dry goods such as foods, powders, or supplements, they are not restrictive in their use. They measure approximately 20cm x 30cm +10cm gusset or 21cm x 28cm + 10cm gusset dependent on the need of the customer. Mainly used for commercial packing. Laid flat and packed 500 to a box. Made from: Mono-oriented polypropylene (MOPP) as a matte finish.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3(1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 Has been used to classify this product by the terms of heading 3923: Articles for the conveyance or packing of goods, of plastics; stoppers, lids, caps, and other closures, of plastics. GIR5b has been used for normal transport: Packed within a cardboard box of 500. GIR 6 Has been used to classify this product by the terms of heading 392329: Sacks and bags (including cones), of other plastics 8-digit code 39232990 Other than of poly(vinyl chloride) Also classified in accordance with: Chapter 39 Note 1 Harmonised System Explanatory Notes (HSEN) to heading 39.23 (a) Combined Nomenclature Explanatory note …
- UK 3923299000 Valid Dec 2, 2024 to Dec 1, 2027 · Ruling 600011777 on GOV.UK
Plastic storage pouch. A plastic stand up pouch with an internal shiny aluminium layer. The pouch also has an internal plastic zipper seal. The pouches begin as a white matte finish stand up pouch with a gusset, it has a tear notch to the top. The pouches will go on to be screen printed in colour with various product details, as required and dependent on the product. The pouches are used to store a range of dry goods such as foods, powders, or supplements, they are not restrictive in their use. They measure approximately 20cm x 30cm +10cm gusset or 21cm x 28cm + 10cm gusset dependent on the need of the customer. Mainly used for commercial packing. Laid flat and packed 500 to a box. Made from: MOPP(matte finish)+AL+PE
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3(1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 Has been used to classify this product by the terms of heading 3923: Articles for the conveyance or packing of goods, of plastics; stoppers, lids, caps, and other closures, of plastics. GIR5b has been used for the packing: Packed within a cardboard box for transport. GIR 6 Has been used to classify this product by the terms of heading 392329: Sacks and bags (including cones), of other plastics 8-digit code 39232990 Other than of poly(vinyl chloride) Also classified in accordance with: Chapter 39 Note 1 Harmonised System Explanatory Notes (HSEN) to heading 39.23 (a) Combined Nomenclature Explanatory note …
- UK 3923299000 Valid Jun 4, 2025 to Jun 3, 2028 · Ruling 600012821 on GOV.UK
Bin liners. The bin bags are intended to be used in collection of food waste. They will also have other similar uses. These are a compostable eco-alternative to traditional plastic bags. These are made from PBAT- Polybutylene adipate terephthalate, PLA- Polylactic Acid and corn starch. The main composite material is PBAT, a biodegradable and compostable plastic copolymer which is considered a plastic within the meaning of Note 1 to Chapter 39, has the essential character. They are light green in colour, and they are available in two sizes. 50L - 71*107cm - 20 bags/roll - 10 rolls/carton. 120L - 90*135cm - 10 bags/roll, 20 rolls/carton. The products are packaged in a recyclable cardboard box,
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3(1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 3923 - Articles for the conveyance or packing of goods, of plastics; stoppers, lids, caps and other closures, of plastics. GIR 5b has been used to identify the type of packaging, as plastic liners inside cardboard boxes. GIR 6 has been used to classify the goods to subheading level 392329 as 392329 Sacks and bags (including cones) other than of polymers of ethylene; other plastics. 8-digit code: 39232990 Other than of poly (vinyl Chloride). Also classified in accordance with: Heading 3923 Chapter note 1. Harmonized system explanatory notes …
- UK 3923299000 Valid Dec 11, 2025 to Dec 10, 2028 · Ruling 600013936 on GOV.UK
Bags with ties in packs of twenty. The bags are made of OPP (Oriented Polypropylene). The bags are packaged in sets of twenty in plastic bags with a card header.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product to Heading 3923 - Articles for the conveyance or packing of goods, of plastics; stoppers, lids, caps and other closures, of plastics GIR 3B has been used to determine the essential character - Plastic bags GIR 5B has been used to determine the packaging - Plastic packaging with paperboard heading GIR 6 has been used to classify this product to sub-heading level 392329 - Sacks and bags; of other plastics 8 Digit Code 39232990 - Other than of poly(vinyl chloride) Also classified in accordance with: Chapter Note 1 to Chapter 39
- UK 3923299000 Valid Nov 28, 2025 to Nov 27, 2028 · Ruling 600013973 on GOV.UK
Bags for freezing ice cubes made of a mix of polypropylene and polyethylene. Packaged in card boxes for transport and storage.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product to Heading 3923 - Articles for the conveyance or packing of goods, of plastics; stoppers, lids, caps and other closures, of plastics GIR 5B has been used to determine the packaging - Card boxes of 25 for transport and storage. GIR 6 has been used to classify this product to sub-heading level 392329 - Sacks and Bags, of other plastics 8 Digit Code - 39232990 - Other than of polyvinyl chloride Also classified in accordance with: Harmonised System Explanatory Note (HSEN) (a) to heading 3923
- UK 3923299000 Valid Dec 5, 2025 to Dec 4, 2028 · Ruling 600014177 on GOV.UK
Bags used for packing garments. These are made from a material based on on polyvinyl alcohol . The bags are biodegradable.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect: a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIRs): GIR 1 has been used to classify the product by the terms of heading 3923- Articles for the conveyance or packing of goods, of plastics; stoppers, lids, caps and other closures, of plastics GIR 5 (B) has been used to identify the type of packaging GIR 6 has been used to classify the goods to subheading level 392329 - Sacks and bags (including cones); of other plastics 8 digit 39232990 - Other than of poly(vinyl chloride) Also classified in accordance with: Chapter 39 Note 1 Harmonised System Explanatory Notes (HSENs) to heading 3923
- UK 3923299000 Valid Feb 9, 2026 to Feb 8, 2029 · Ruling 600014836 on GOV.UK
Food pouch made from a laminate of polyester 12um,foil ,9um,nylon (OPA) 15um,polypropylene70um. Used for food packaging Packaging: supplied inside plastic liners which are contained within a cardboard box
Justification
Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 3923 - Articles for the conveyance or packing of goods, of plastics; stoppers, lids, caps and other closures, of plastics GIR 5b has been used to identify the type of packaging – plastic liners which are contained within a cardboard box GIR 6 has been used to classify the goods to subheading level 392329 – Sacks and bags (including cones); Other than polymers of ethylene: Of other plastics 8 digit code 39232990 - Other than of poly(vinyl chloride) Also classified in accordance with: HSEN to 3923 Chapter 42 note 3(A)
- UK 3923299000 Valid Oct 26, 2026 to Oct 25, 2029 · Ruling 600016470 on GOV.UK
Plastic sacks made from a compostable corn starch based biodegradable plastic. The bags are intended for picking up dog poo. The come in rolls of 15 bags, and packed in card boxes of 4 rolls (total 60 bags) or 8 rolls (total 120 bags).
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product to Heading 3923 - Articles for the conveyance or packing of goods, of plastics; stoppers, lids, caps and other closures, of plastics GIR 5B has been used to determine the packaging - card or paper box for transport and storage GIR 6 has been used to classify this product to sub-heading level 392329 - Sacks and bags (including cones); Of other plastics 8 Digit Code 39232990 - Other than of poly(vinyl chloride) Also classified in accordance with: Harmonised System Explanatory Note (HSEN) A to Heading 3923 Chapter Note 1 to Chapter 39
- UK 3923299000 Valid Oct 26, 2026 to Oct 25, 2029 · Ruling 600016518 on GOV.UK
Plastic sacks made from a compostable corn starch based biodegradable plastic. The bags are intended for picking up dog poo. The come in two rolls and with a dispenser. The dispenser is shaped like a bone, and meant to hold on to the bags during walks.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product to Heading 3923 - Articles for the conveyance or packing of goods, of plastics; stoppers, lids, caps and other closures, of plastics GIR 3B has been used to determine the waste bags as the essential character GIR 6 has been used to classify this product to sub-heading level 392329 - Sacks and bags (including cones); Of other plastics 8 Digit Code 39232990 - Other than of poly(vinyl chloride) Also classified in accordance with: Harmonised System Explanatory Note (HSEN) A to Heading 3923 Chapter Note 1 to Chapter 39
Source: HM Revenue & Customs, Advance Tariff Rulings. Contains public sector information licensed under the Open Government Licence v3.0.
Restrictions and flags for 39232900
- Russia sanctions: import ban Regulation (EU) No 833/2014, Annex XXI 3923
Art. 3i, goods generating significant revenue for Russia
Read the act on EUR-Lex
For orientation only. Check the act before you rely on a flag; thresholds, derogations and exceptions are not shown in full.
EU trade in 2025 for 39232900
- Extra-EU imports
- €609.5M
- 112,220 t
- Extra-EU exports
- €540.9M
Top origin countries by import value
China €187.3M
United Kingdom €111.5M
United States €79.9M
Türkiye €54.1M
Switzerland €41.6M
Figures for CN8 code 39232900. Source: Eurostat, Comext, CC BY 4.0, processed by hscode.info. Confidential trade is not allocated to codes.
HS 2028 change
This subheading changes on 1 January 2028.
HS 2022 subheading 392329 is split. New HS 2028 subheadings: 392323, 392329.
From the WCO HS 2022 to HS 2028 correlation tables, a guide only. The EU sets its own CN codes for 2028.
UK import duty for 392329
- 6%
Third-country duties of all UK commodity codes under this HS subheading. Source: UK Department for Business and Trade, as of Nov 2, 2026. The UK tariff differs from the EU tariff.
Import VAT in the EU
- Austria 20 %
- Belgium 21 %
- Bulgaria 20 %
- Croatia 25 %
- Cyprus 19 %
- Czechia 21 %
- Denmark 25 %
- Estonia 24 % maybe 9 %
- Finland 25.5 %
- France 20 %
- Germany 19 %
- Greece 24 %
- Hungary 27 %
- Ireland 23 %
- Italy 22 %
- Latvia 21 %
- Lithuania 21 %
- Luxembourg 17 %
- Malta 18 %
- Netherlands 21 %
- Poland 23 %
- Portugal 23 %
- Romania 21 %
- Slovakia 23 %
- Slovenia 22 % maybe 9.5 %
- Spain 21 %
- Sweden 25 %
Standard rate per member state, on the customs value, the duty and transport to the destination. Reduced rates often depend on the use or the buyer and apply only where the country provides them for these goods. Source: European Commission, Taxes in Europe Database, as of Nov 2, 2026.
Rules of origin
Preferential rules of origin for subheading 392329 depend on the trade agreement. The Commission publishes them in Access2Markets.
Rules of origin on Access2MarketsInformation
When importing or exporting "Of other plastics", it is crucial to have the correct HS code or TARIC code. The HS code 3923290000 80 serves as the standard code for this product, ensuring that the appropriate duties and taxes are applied when crossing international borders.
To ensure your business transactions run smoothly when importing or exporting "Of other plastics", consider the following points:
- Inform yourself about the specific import and export regulations in the countries involved. This includes possible restrictions, taxes, and duties applicable to "Of other plastics".
- Check if any additional licenses, permits, or certificates are required to import "Of other plastics" into the destination country or export it from the country of origin.
- Make sure your trading partners have valid identification numbers, such as EORI numbers (Economic Operators Registration and Identification) in the EU, to streamline trade and minimize delays.
- Ensure that all trade- and customs-related documents (such as commercial invoices, packing lists, certificates of origin, and insurance policies) are accurately completed and adhere to the respective national regulations.
- Keep an eye on the current exchange rates, as well as packaging, shipping, and insurance costs, to accurately calculate trade costs.
In summary, the HS code or TARIC code for "Of other plastics" is 3923290000 80. Make sure you accurately use this code in all your trade and customs documents to guarantee smooth and hassle-free transactions. With these tips, you'll be better prepared for the challenges of international trade and can successfully import and export "Of other plastics".
HS Code structure
1. Chapter
There are 21 different sections, which are divided into 96 chapters. Exceptional chapters include chapter 77, which is reserved for future use, chapters 98 and 99, which are limited at national level, and chapter 99, which is a specific code for temporary changes. In the example above, chapter 39 was selected for plastics and articles thereof
2. Heading
The heading determines the specific category within a certain chapter. In the example above, the 23 refers to Articles for the conveyance or packing of goods, of plastics; stoppers, lids, caps and other closures, of plastics.
3. Subheading
The last two digits of the international harmonized code are more specific and define subcategories of products. In the example above, the 29 refers to Of other plastics.
HS Code tree structure
3900000000 80
Chapter PLASTICS AND ARTICLES THEREOF
3923000000 80
Articles for the conveyance or packing of goods, of plastics; stoppers, lids, caps and other closures, of plastics
3923100000 80
- Boxes, cases, crates and similar articles
3923101000 80
- - Boxes, cases, crates and similar articles, of plastic, specially shaped or fitted for the conveyance or packing of semiconductor wafers, masks, or reticles
3923109000 80
- - Other
3923109010 80
- - - Photomask or wafer compacts: - consisting of antistatic materials or blended thermoplastics proving special electrostatic discharge (ESD) and outgassing properties, - having non porous, abrasion resistant or impact resistant surface properties, - fitted with a specially designed retainer system that protects the photomask or wafers from surface or cosmetic damage and - with or without a gasket seal, of a kind used in the photolithography or other semiconductor production to house photomasks or wafers
3923109090 80
- - - Other
3923210000 10
- Sacks and bags (including cones)
3923210000 80
- - Of polymers of ethylene
3923290000 80
- - Of other plastics
3923291000 80
- - - Of poly(vinyl chloride)
3923299000 80
- - - Other
3923300000 80
- Carboys, bottles, flasks and similar articles
3923301000 80
- - Of a capacity not exceeding two litres
3923309000 80
- - Of a capacity exceeding two litres
3923400000 80
- Spools, cops, bobbins and similar supports
3923401000 80
- - Spools, reels and similar supports for photographic and cinematographic film or for tapes, films and the like of heading 8523
3923409000 80
- - Other
3923500000 80
- Stoppers, lids, caps and other closures
3923501000 80
- - Caps and capsules for bottles
3923509000 80
- - Other
3923900000 80
- Other