New Describe a product, get the CN code. Also as API and MCP for AI agents. Try it free
Jump to content

Tariff number 3926400000 80 - Statuettes and other ornamental articles

Import trade restrictions for 3926400000 80

This table contains information on trade restrictions for the import of goods into the EU and the EU into third countries. The table contains information on trade restrictions which are imposed due to customs unions, preferences, tariff quotas, customs unions, veterinary controls, third country duties and non-preferential tariff quotas.

Duties 68
1007
EU-Switzerland agreement: re-imported goods 1007
01-01-2007
0 %
Tariff preference 142
MK
North Macedonia MK
01-01-2009
0 %
Tariff preference 142
BA
Bosnia and Herzegovina BA
01-01-2009
0 %
Tariff preference 142
2020
GSP - General arrangements 2020
01-01-2023
0 %
Tariff preference 142
SG
Singapore SG
01-01-2027
0 %
Tariff preference 142
XS
Serbia XS
01-02-2010
0 %
Tariff preference 142
AL
Albania AL
01-04-2009
0 %
Tariff preference 142
XK
Kosovo XK
01-04-2016
0 %
Tariff preference 142
ME
Montenegro ME
01-05-2010
0 %
Tariff preference 142
NZ
New Zealand NZ
01-05-2024
0 %
Tariff preference 142
1011
ERGA OMNES 1011
01-11-2018
0 %
Airworthiness tariff suspension 119
AM
Armenia AM
10-10-2026
– 11-10-2028
0 %
Tariff preference 142
CH
Switzerland CH
20-12-1972
0 %
Tariff preference 142
SG
Singapore SG
21-11-2019
– 31-12-2026
0 %
Tariff preference 142
1011
ERGA OMNES 1011
01-01-1999
6.5 %
Third country duty 103
UA
Ukraine UA
01-01-2016
0 %
Tariff preference 142
JP
Japan JP
01-02-2020
0 %
Tariff preference 142
PE
Peru PE
01-03-2013
0 %
Tariff preference 142
5500
Mercosur 5500
01-05-2026
– 31-12-2026
5.2 %
Tariff preference 142
1011
ERGA OMNES 1011
01-07-2016
0 %
Suspension - goods for certain categories of ships, boats and other vessels and for drilling or production platforms 117
CA
Canada CA
21-09-2017
0 %
Tariff preference 142
1006
EU-Canada agreement: re-imported goods 1006
21-09-2017
0 %
Tariff preference 142
FO
Faroe Islands FO
01-01-1997
0 %
Tariff preference 142
XL
Melilla XL
01-01-1999
0 %
Accession act0001/85
Tariff preference 142
PS
Occupied palestinian Territory PS
01-01-2001
0 %
Tariff preference 142
AD
Andorra AD
01-01-2006
0 %
Customs union duty 106
SM
San Marino SM
01-01-2006
0 %
Customs union duty 106
TR
Türkiye TR
01-01-2006
0 %
Customs union duty 106
2027
GSP+ (incentive arrangement for sustainable development and good governance) 2027
01-01-2014
0 %
Tariff preference 142
2005
GSP-EBA (Special arrangement for the least-developed countries - Everything But Arms) 2005
01-01-2014
0 %
Tariff preference 142
MD
Moldova, Republic of MD
01-01-2016
0 %
Tariff preference 142
EC
Ecuador EC
01-01-2017
0 %
Tariff preference 142
GB
United Kingdom GB
01-01-2021
0 %
Tariff preference 142
2080
OCTs (Overseas Countries and Territories) 2080
01-01-2021
0 %
Tariff preference 142
GH
Ghana GH
01-01-2027
0 %
Tariff preference 142
CL
Chile CL
01-02-2025
0 %
Tariff preference 142
TN
Tunisia TN
01-03-1998
0 %
Tariff preference 142
MA
Morocco MA
01-03-2000
0 %
Tariff preference 142
LB
Lebanon LB
01-04-2006
0 %
Tariff preference 142
JO
Jordan JO
01-05-2002
0 %
Tariff preference 142
EG
Egypt EG
01-06-2004
0 %
Tariff preference 142
XC
Ceuta XC
01-07-1991
0 %
Accession act0001/85
Tariff preference 142
2012
EEA - European Economic Area 2012
01-07-2007
0 %
Tariff preference 142
KR
Korea, Republic of (South Korea) KR
01-07-2014
0 %
Tariff preference 142
MX
Mexico MX
01-07-2016
0 %
Tariff preference 142
KE
Kenya KE
01-07-2024
0 %
Tariff preference 142
US
United States US
01-07-2026
0 %
Tariff preference 142
SY
Syria SY
01-08-1994
0 %
Tariff preference 142
CO
Colombia CO
01-08-2013
0 %
Tariff preference 142
2200
Central America 2200
01-08-2013
0 %
Tariff preference 142
VN
Viet Nam VN
01-08-2020
0 %
Tariff preference 142
DZ
Algeria DZ
01-09-2005
0 %
Tariff preference 142
GE
Georgia GE
01-09-2014
0 %
Tariff preference 142
1011
ERGA OMNES 1011
01-11-2026
2 EUR
Union handling fee 800
1011
ERGA OMNES 1011
01-11-2026
3 EUR
Low-value consignment customs duty 107
CI
Ivory Coast CI
02-12-2019
0 %
Tariff preference 142
2000
Preferential origin in accordance with the Agreement in the form of an Exchange of Letters between the European Union and the Kingdom of Morocco on the amendment of Protocols 1 and 4 to the Euro-Mediterranean Agreement establishing an association between the European Communities and their Member States, of the one part, and the Kingdom of Morocco, of the other part. 2000
03-10-2025
0 %
Tariff preference 142
CM
Cameroon CM
04-08-2014
0 %
Tariff preference 142
1035
SADC EPA 1035
10-10-2016
0 %
Tariff preference 142
ZA
South Africa ZA
10-10-2016
0 %
Tariff preference 142
1034
Eastern and Southern Africa States 1034
14-05-2012
0 %
Tariff preference 142
GH
Ghana GH
15-12-2016
– 31-12-2026
0 %
Tariff preference 142
IL
Israel IL
16-05-2023
0 %
Tariff preference 142
SB
Solomon Islands SB
17-05-2020
0 %
Tariff preference 142
PG
Papua New Guinea PG
20-12-2009
0 %
Tariff preference 142
FJ
Fiji FJ
28-07-2014
0 %
Tariff preference 142
1033
CARIFORUM 1033
29-12-2008
0 %
Tariff preference 142
WS
Samoa WS
31-12-2018
0 %
Tariff preference 142
Controls and documents 4
RU
Russian Federation RU
19-12-2023
– 31-12-2027
Document required
banned without it
Import control 762
BY
Belarus BY
25-02-2025
Document required
banned without it
Import control 760
UA
Ukraine UA
24-06-2026
Document required
banned without it
Import control 762
UA
Ukraine UA
24-06-2026
Document required
banned without it
Import control 760

Explanation of trade restrictions

Erga Omnes means "for all".

Third countries are countries that are not part of the EU.

GSP means "Generalised System of Preferences".

GSP Plus means "Generalised System of Preferences Plus".

European Economic Area (EEA) means all EU member states and Iceland, Liechtenstein and Norway.

OCTs stands for "Overseas Countries and Territories". They are countries and territories that are not part of the EU. More information

CARIFORUM is a regional economic integration organisation comprising 15 Caribbean Community (CARICOM) countries and the Dominican Republic.

SADC EPA stands for "Southern African Development Community - Economic Partnership Agreement".

Duty means "customs duties".

Estimate the import cost for 39264000

  • Customs value €1,000.00
  • Customs duty 6.5 % €65.00
  • Import VAT 19 % €202.35
  • Total €1,267.35

May be lower under conditions:

  • Airworthiness tariff suspension: 0 %
  • Suspension - goods for certain categories of ships, boats and other vessels and for drilling or production platforms: 0 %

An estimate only. The customs value is the price including transport and insurance to the EU border. Excise duties, other fees and producer-specific anti-dumping rates are not included. Preferential rates need valid proof of origin. Country groups and exclusions: TARIC, as of November 2026.

History

Duty rates and measures for this code over time (yearly snapshots).

Preferential rules of origin for 3926400000

What the goods must meet to count as originating in a partner country and get the preferential duty, per agreement.

  • Autonomous Trade Preferences (Western Balkans) · Kosovo

    EU-Algeria Association Agreement · Algeria

    EU-Egypt Association Agreement · Egypt

    EU-Jordan Association Agreement · Jordan

    EU-Lebanon Association Agreement · Lebanon

    EU-Morocco Association Agreement · Morocco

    EU-Tunisia Association Agreement · Tunisia

    Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product [13] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [14] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [15] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [16] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [17] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [18] The following foils shall be considered as highly transparent: foils, the optical dimming of which, measured according to ASTM-D 1003-16 by Gardner Hazemeter (i.e. Hazefactor), is less than 2 %.

  • EEA/EFTA agreements (Switzerland, Norway, Liechtenstein, Faroe Islands) · Faroe Islands, Liechtenstein, Norway, Switzerland

    EU-Iceland FTA · Iceland

    EU-Ukraine DCFTA · Ukraine

    Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product [13] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [18] The following foils shall be considered as highly transparent: foils, the optical dimming of which, measured according to ASTM-D 1003-16 by Gardner Hazemeter (i.e. Hazefactor), is less than 2 %.

  • EPA CARIFORUM

    EU-Korea FTA · South Korea

    Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

  • EU-Canada CETA · Canada

    A change from any other heading.

  • EU-Chile Association Agreement · Chile

    Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product [13] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [14] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [15] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [16] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [17] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [18] The following foils shall be considered as highly transparent: foils, the optical dimming of which, measured according to ASTM-D 1003—16 by Gardner Hazemeter (i.e. Hazefactor), is less than 2 %.

  • EU-Colombia/Peru/Ecuador Trade Agreement · Colombia, Ecuador, Peru

    Plastics and articles thereof / or: Manufacture from materials of any heading, except that of the product / or: Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

  • EPA Eastern and Southern Africa

    Rubber and articles thereof; except for: / or: Manufacture in which all the materials used are classified within a heading other than that of the product [13] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [18] The following foils shall be considered as highly transparent: foils, the optical dimming of which – measured according to ASTM-D 1003-16 by Gardner Hazemeter (i.e. Hazefactor) – is less than 2 per cent.

  • EU Market Access Regulation (EPA) · Cameroon, Côte d’Ivoire, Ghana, Kenya

    Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product [16] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [17] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [18] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [19] The following foils shall be considered as highly transparent: foils, the optical dimming of which - measured according to ASTM-D 1003-16 by Gardner Hazemeter (i.e. Hazefactor) - is less than 2 percent.

  • EPA Pacific · Fiji, Papua New Guinea, Samoa, Solomon Islands

    Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product [13] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [18] The following foils shall be considered as highly transparent: foils, the optical dimming of which - measured according to ASTM-D 1003-16 by Gardner Hazemeter (i.e. Hazefactor) - is less than 2 %.

  • EU-Georgia DCFTA · Georgia

    Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product [15] Note 3 to Chapter 32 says that these preparations are those of a kind used for colouring any material or used as ingredients in the manufacture of colouring preparations, provided that they are not classified in another heading in Chapter 32. / or: [20] A ‘group’ is regarded as any part of the heading separated from the rest by a semicolon.

  • Generalised Scheme of Preferences (GSP, GSP+, EBA) · Armenia, India, Kenya, Pakistan, Samoa, Solomon Islands, Syria, Vietnam

    Plastics and articles thereof; except for: / or: (a) LDCs Manufacture from materials of any heading, except that of the product. or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product / or: (b) Other beneficiary countries Manufacture from materials of any heading, except that of the product. or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

  • EU-Israel Association Agreement · Israel

    Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product [22] In the case of the products composed of materials classified both within heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [24] In the case of the products composed of materials classified both within heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [25] In the case of the products composed of materials classified both within heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [28] The following foils shall be considered as highly transparent: foils, the optical dimming of which, measured according to ASTM-D 1003-16 by Gardner Hazemeter (Hazefactor), is less than 2 %.

  • EU-Japan EPA · Japan

    CTH; MaxNOM 50 % (EXW); or RVC 55 % (FOB).

  • EU-Central America Association Agreement

    Articles of plastics / or: Manufacture from materials of any heading, except that of the product / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

  • EU-Moldova DCFTA · Moldova

    Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product [20] The following foils shall be considered as highly transparent: foils, the optical dimming of which, measured according to ASTM-D 1003-16 by Gardner Hazemeter (i.e. Hazefactor), is less than 2 %.

  • EU-Mexico Global Agreement · Mexico

    Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product [15] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [16] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [17] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [18] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [19] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [20] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [21] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [22] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [23] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [24] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [25] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [26] The following foils shall be considered as highly transparent: foils, the optical dimming of which - measured according to ASTM-D 1003-16 by Gardner Hazemeter (i.e. Hazefactor) - is less than 2 %.

  • Pan-Euro-Mediterranean (PEM) Convention · Albania, Andorra, Bosnia & Herzegovina, Egypt, Faroe Islands, Iceland, Kosovo, Liechtenstein, Montenegro, North Macedonia, Norway, Palestine, Switzerland, Türkiye

    Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product [15] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within heading 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [20] The following foils shall be considered as highly transparent: foils, the optical dimming of which, measured according to ASTM-D 1003-16 by Gardner Hazemeter (i.e. Hazefactor), is less than 2%.

  • EU-Palestine Interim Association Agreement · Palestine

    Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product [1] In the case of the products composed of materials classified within both heading Nos. 3901 to 3906, on the one hand, and within heading Nos. 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [1] The following foils shall be considered as highly transparent: foils, the optical dimming of which - measured according to ASTM-D 1003-16 by Gardner Hazemeter (i.e. Hazefactor) - is less than 2 percent.

  • EPA SADC · South Africa

    Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex–works price of the product [18] In the case of the products composed of materials classified both within heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to the group of materials which predominates by weight in the product. / or: [19] In the case of the products composed of materials classified both within heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to the group of materials which predominates by weight in the product. / or: [21] In the case of the products composed of materials classified both within heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to the group of materials which predominates by weight in the product. / or: [23] The following foils shall be considered as highly transparent: foils, the optical dimming of which — measured according to ASTM-D 1003-16 by Gardener Hazemeter (i.e. Hazefactor) — is less than 2 percent.

  • EU-Singapore FTA · Singapore

    Manufacture from materials of any heading, except that of the product. However materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-work price of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product [21] In the case of the products composed of materials classified within both headings 3901 to 3906, and in the case of the products within headings 3907 to 3911, this restriction only applies to that group of materials which predominates by weight in the product.

Source: European Commission, Access2Markets (CC BY 4.0, shortened). The text of the agreement prevails. Access2Markets

Legal and explanatory notes for 3926400000

3926 40 00 CN Explanatory Notes: Statuettes and other ornamental articles

This subheading includes ornamental articles for the home and garden consisting of rock powder (approx. 59 % by weight of calcium carbonate), plastic (approx. 39 % by weight of unsaturated polyester) and a small amount of other additives where the plastic gives the articles their essential character. The rock powder is in this case a filler material.

Notes to chapter 39

Notes 1. Throughout the nomenclature, the expression ‘plastics’ means those materials of headings 3901 to 3914 which are or have been capable, either at the moment of polymerisation or at some subsequent stage, of being formed under external influence (usually heat and pressure, if necessary with a solvent or plasticiser) by moulding, casting, extruding, rolling or other process into shapes which are retained on the removal of the external influence. Throughout the nomenclature, any reference to ‘plastics’ also includes vulcanised fibre. The expression, however, does not apply to materials regarded as textile materials of Section XI. 2. This chapter does not cover: (a) lubricating preparations of heading 2710 or 3403; (b) waxes of heading 2712 or 3404; (c) separate chemically defined organic compounds (Chapter 29); (d) heparin or its salts (heading 3001); (e) solutions (other than collodions) consisting of any of the products specified in headings 3901 to 3913 in volatile organic solvents when the weight of the solvent exceeds 50 % of the weight of the solution (heading 3208); stamping foils of heading 3212; (f) organic surface-active agents or preparations of heading 3402; (g) run gums or ester gums (heading 3806); (h) prepared additives for mineral oils (including gasoline) or for other liquids used for the same purposes as mineral oils (heading 3811); (ij) prepared hydraulic fluids based on polyglycols, silicones or other polymers of Chapter 39 (heading 3819); (k) diagnostic or laboratory reagents on a backing of plastics (heading 3822); (l) synthetic rubber, as defined for the purposes of Chapter 40, or articles thereof; (m) saddlery or harness (heading 4201) or trunks, suitcases, handbags or other containers of heading 4202; (n) plaits, wickerwork or other articles of Chapter 46; (o) wallcoverings of heading 4814; (p) goods of Section XI (textiles and textile articles); (q) articles of Section XII (for example, footwear, headgear, umbrellas, sun umbrellas, walking sticks, whips, riding-crops or parts thereof); (r) imitation jewellery of heading 7117; (s) articles of Section XVI (machines and mechanical or electrical appliances); (t) parts of aircraft or vehicles of Section XVII; (u) articles of Chapter 90 (for example, optical elements, spectacle frames, drawing instruments); (v) articles of Chapter 91 (for example, clock or watch cases); (w) articles of Chapter 92 (for example, musical instruments or parts thereof); (x) articles of Chapter 94 (for example, furniture, luminaires and lighting fittings, illuminated signs, prefabricated buildings); (y) articles of Chapter 95 (for example, toys, games, sports requisites); or (z) articles of Chapter 96 (for example, brushes, buttons, slide fasteners, combs, mouthpieces or stems for smoking pipes, cigarette-holders or the like, parts of vacuum flasks or the like, pens, propelling pencils, and monopods, bipods, tripods and similar articles). 3. Headings 3901 to 3911 apply only to goods of a kind produced by chemical synthesis, falling in the following categories: (a) liquid synthetic polyolefins of which less than 60 % by volume distils at 300 °C, after conversion to 1 013 mbar when a reduced-pressure distillation method is used (headings 3901 and 3902); (b) resins, not highly polymerised, of the coumarone-indene type (heading 3911); (c) other synthetic polymers with an average of at least five monomer units; (d) silicones (heading 3910); (e) resols (heading 3909) and other prepolymers. 4. The expression ‘copolymers’ covers all polymers in which no single monomer unit contributes 95 % or more by weight to the total polymer content. For the purposes of this chapter, except where the context otherwise requires, copolymers (including co-polycondensates, co-polyaddition products, block copolymers and graft copolymers) and polymer blends are to be classified in the heading covering polymers of that comonomer unit which predominates by weight over every other single comonomer unit. For the purposes of this note, constituent comonomer units of polymers falling in the same heading shall be taken together. If no single comonomer unit predominates, copolymers or polymer blends, as the case may be, are to be classified in the heading which occurs last in numerical order among those which equally merit consideration. 5. Chemically modified polymers, that is those in which only appendages to the main polymer chain have been changed by chemical reaction, are to be classified in the heading appropriate to the unmodified polymer. This provision does not apply to graft copolymers. 6. In headings 3901 to 3914, the expression ‘primary forms’ applies only to the following forms: (a) liquids and pastes, including dispersions (emulsions and suspensions) and solutions; (b) blocks of irregular shape, lumps, powders (including moulding powders), granules, flakes and similar bulk forms. 7. Heading 3915 does not apply to waste, parings and scrap of a single thermoplastic material, transformed into primary forms (headings 3901 to 3914). 8. For the purposes of heading 3917, the expression ‘tubes, pipes and hoses’ means hollow products, whether semi-manufactured or finished products, of a kind generally used for conveying, conducting or distributing gases or liquids (for example, ribbed garden hose, perforated tubes). This expression also includes sausage casings and other lay-flat tubing. However, except for the last mentioned, those having an internal cross-section other than round, oval, rectangular (in which the length does not exceed one-and-a-half times the width) or in the shape of a regular polygon are not to be regarded as tubes, pipes and hoses but as profile shapes. 9. For the purposes of heading 3918, the expression ‘wall or ceiling coverings of plastics’ applies to products in rolls, of a width not less than 45 cm, suitable for wall or ceiling decoration, consisting of plastics fixed permanently on a backing of any material other than paper, the layer of plastics (on the face side) being grained, embossed, coloured, design-printed or otherwise decorated. 10. In headings 3920 and 3921, the expression ‘plates, sheets, film, foil and strip’ applies only to plates, sheets, film, foil and strip (other than those of Chapter 54) and to blocks of regular geometric shape, whether or not printed or otherwise surface-worked, uncut or cut into rectangles (including squares) but not further worked (even if when so cut they become articles ready for use). 11. Heading 3925 applies only to the following articles, not being products covered by any of the earlier headings of sub-chapter II: (a) reservoirs, tanks (including septic tanks), vats and similar containers, of a capacity exceeding 300 litres; (b) structural elements used, for example, in floors, walls or partitions, ceilings or roofs; (c) gutters and fittings therefor; (d) doors, windows and their frames and thresholds for doors; (e) balconies, balustrades, fencing, gates and similar barriers; (f) shutters, blinds (including venetian blinds) and similar articles and parts and fittings thereof; (g) large-scale shelving for assembly and permanent installation, for example, in shops, workshops, warehouses; (h) ornamental architectural features, for example, flutings, cupolas, dovecotes; and (ij) fittings and mountings intended for permanent installation in or on doors, windows, staircases, walls or other parts of buildings, for example, knobs, handles, hooks, brackets, towel rails, switch-plates and other protective plates. Subheading notes 1. Within any one heading of this chapter, polymers (including copolymers) and chemically modified polymers are to be classified according to the following provisions: (a) where there is a subheading named ‘Other’ in the same series: (1) the designation in a subheading of a polymer by the prefix ‘poly’ (for example, polyethylene and polyamide-6,6) means that the constituent monomer unit or monomer units of the named polymer taken together must contribute 95 % or more by weight of the total polymer content; (2) the copolymers named in subheadings 3901 30, 3901 40, 3903 20, 3903 30 and 3904 30 are to be classified in those subheadings, provided that the comonomer units of the named copolymers contribute 95 % or more by weight of the total polymer content; (3) chemically modified polymers are to be classified in the subheading named ‘Other’, provided that the chemically modified polymers are not more specifically covered by another subheading; (4) polymers not meeting (1), (2) or (3) above, are to be classified in the subheading, among the remaining subheadings in the series, covering polymers of that monomer unit which predominates by weight over every other single comonomer unit. For this purpose, constituent monomer units of polymers falling in the same subheading shall be taken together. Only the constituent comonomer units of the polymers in the series of subheadings under consideration are to be compared; (b) where there is no subheading named ‘Other’ in the same series: (1) polymers are to be classified in the subheading covering polymers of that monomer unit which predominates by weight over every other single comonomer unit. For this purpose, constituent monomer units of polymers falling in the same subheading shall be taken together. Only the constituent comonomer units of the polymers in the series under consideration are to be compared; (2) chemically modified polymers are to be classified in the subheading appropriate to the unmodified polymer. Polymer blends are to be classified in the same subheading as polymers of the same monomer units in the same proportions. 2. For the purposes of subheading 3920 43, the term ‘plasticisers’ includes secondary plasticisers. Additional note 1. Where the woven, knitted or crocheted fabrics, felt or nonwovens are present merely for reinforcing purposes, gloves, mittens or mitts impregnated, coated or covered with cellular plastics belong to Chapter 39, even if they are: — made up from woven, knitted or crocheted fabrics (other than those of heading 5903), felt or nonwovens impregnated, coated or covered with cellular plastics, or — made up from unimpregnated, uncoated or uncovered woven, knitted or crocheted fabrics, felt or nonwovens and subsequently impregnated, coated or covered with cellular plastics. (Note 3(c) to Chapter 56 and note 2(a)(5) to Chapter 59).

Notes to section VII

PLASTICS AND ARTICLES THEREOF; RUBBER AND ARTICLES THEREOF Notes 1. Goods put up in sets consisting of two or more separate constituents, some or all of which fall in this section and are intended to be mixed together to obtain a product of Section VI or VII, are to be classified in the heading appropriate to that product, provided that the constituents are: (a) having regard to the manner in which they are put up, clearly identifiable as being intended to be used together without first being repacked; (b) presented together; and (c) identifiable, whether by their nature or by the relative proportions in which they are present, as being complementary one to another. 2. Except for the goods of heading 3918 or 3919, plastics, rubber, and articles thereof, printed with motifs, characters or pictorial representations, which are not merely subsidiary to the primary use of the goods, fall in Chapter 49.

Other explanatory notes for the chapter

General The HS Explanatory Note to Chapter 39, General, ‘Combinations of plastics and materials other than textiles’, point (d), applies, mutatis mutandis, to combinations of carbon fibres and plastics.

Note 4 Calculation of mass ratios of monomer units in copolymers: The mass ratios of the respective monomer units in copolymer chains are calculated based on the molecular structure of the copolymer (not the starting materials), taking into account the formation reaction of the polymer. When applicable, the atom linking two adjacent monomer units is attributed to the monomer unit from which the atom originates. The following examples illustrate the calculation of the monomer unit content in copolymers: — In poly(ethylene terephthalate), which is a polyester comprised of terephthalic acid and ethylene glycol moieties, both alcoholic oxygens are attributed to the glycol monomer unit. Hence, ethylene glycol is calculated as C2H4O2, and terephthalate is calculated as C8H4O2. — In polyamide-6,6, which is a polyamide comprised of hexamethylenediamine and adipic acid, both nitrogen atoms are attributed to the diamine monomer unit. Hence, hexamethylenediamine is calculated as C6H14N2 and adipic acid is calculated as C6H8O2.

Note 6 The term ‘solutions’, used both in this note and in note 4 to Chapter 32, does not apply to colloidal solutions.

Sources: Combined Nomenclature 2026, Annex I to Regulation (EEC) No 2658/87 (CELEX 32025R1926), and the Explanatory Notes to the Combined Nomenclature (CELEX 02019XC0329(02)-20260213). The section and chapter notes are legally binding; the explanatory notes are guidance. EUR-Lex

EU classification regulations for 3926400000

Commission regulations that classified specific goods under this code. They bind customs in every member state for identical goods.

  • 3926 40 00 Feb 24, 2016 · Regulation on EUR-Lex
    An article predominantly made of plastics, having the shape of a pointed cylinder (so-called ‘LED glitter lamp’), approximately 17 cm high. The article tapers to a point at the top, with a broader base, and has a transparent plastic middle section. The middle section is decorated inside with a stylised figure of a girl and is filled with a transparent fluid which has glitter particles suspended in it.

    The base contains several battery-powered light-emitting diodes (LEDs). When the article is shaken, the middle section glows gently in different colours. The light is only emitted briefly, for about one minute, after shaking. See image (*1).

    Reasons

    Classification is determined by general rules 1 and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 3926 and 3926 40 00 . The article cannot be classified as a lamp under heading 9405 , because it is not primarily designed to illuminate, for example, a room, nor is it a specialised lamp (see also the Harmonised System Explanatory Notes (HSEN) to heading 9405 , (I), (1) and (3)). According to its objective characteristics, the article is not essentially intended for the amusement of persons (children or adults) (see also the HSEN to heading 9503 , (D)). Classification under heading 9503 as a toy is therefore also excluded. Due to its objective characteristics, the article is mainly designed for decorative purposes. The illumination is only enhancing the ornamental effect. Consequently, the article is to be classified under CN code 3926 40 00 as other ornamental articles of plastics.

  • 3926 40 00 May 19, 2015 · Regulation on EUR-Lex
    An article in the shape of a human skull made of plastics, measuring approximately 9 × 11 × 7 cm. It contains flashing light emitting diodes (LEDs) that are powered by a battery and are embedded in the eye sockets of the skull and can be turned on and off using a switch at the base of the article.

    (See photograph) (*1)

    Reasons

    Classification is determined by general rules 1, 3(b) and 6 for the interpretation of the Combined Nomenclature (GIR) and by the wording of CN codes 3926 and 3926 40 00 . The article cannot be classified as a lamp under heading 9405 , because it is not primarily designed to illuminate a room, nor is it a specialised lamp (see also the Harmonised System Explanatory Notes (HSEN) to heading 9405 , (I), (1) and (3)). According to its objective characteristics, the article is not exclusively designed as a festive article (see also the Explanatory notes to the Combined Nomenclature to heading 9505 ). It can be used as decoration throughout the year. Classification under heading 9505 as a festive article is therefore also excluded. The article is made up of different components within the meaning of GIR 3(b). It consists of a component in the shape of a human skull made of plastics and battery powered LED lights, which together form a whole (see also the HSEN to GIR 3(b), (IX)). Due to its objective characteristics, the article is mainly designed for ornamental use. The illumination is only an additional effect enhancing the ornamental use. Consequently, the component in the shape of a human skull made of plastics is the component that gives the article its essential character within the meaning of GIR 3(b). The article is therefore to be classified under CN code 3926 40 00 as other ornamental articles of plastics.

  • 3926 40 00 May 23, 1995 · Regulation on EUR-Lex

    An ornamental article (luminous fountain or ‘running tap’), put up unassembled in a packing for retail sale. Assembled, the various plastic components (a base about 15 cm diameter, incorporating a lighting system and an electric motor with a power-supply cable, and equipped with a switch, three basins, various pipe connections, a tap, a small figure of a dancer, artificial flowers and foliage, etc.) form one or other of the articles depicted (1) (height between 30 cm and 40 cm)

    Reasons

    Classification is determined by the provisions of General Rules 1 and 6 for the interpretation of the combined nomenclature and by the wording of CN codes 3926 and 3926 40 00

+ 1 more
  • 3926 40 00 Jul 22, 1992 · Regulation on EUR-Lex

    Articles in the form of animals (horses and deer) made of plastics covered with a layer of flock applied by glueing.

    Reasons

    Classification is determined by general rules 1, 3 (b) and 6 for the interpretation of the combined nomenclature and by the wording of CN codes 3926 and 3926 40 00.

UK advance tariff rulings for 3926400000

Rulings of HM Revenue & Customs for goods with UK commodity codes that start like this EU code. The UK tariff differs from the EU tariff, so these rulings are guidance for the EU.

  • UK 3926400000 Valid Dec 5, 2023 to Dec 4, 2026 · Ruling 600009324 on GOV.UK

    A set of ornamental figurines, made from artificial stone. The composite materials comprise of ground stone of calcium carbonate and unsaturated polyester resin. Designed for indoor use.

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect : a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading 3926 Other articles of plastics and articles of other materials of headings 3901 to 3914 GIR 3b - has been used as the ornamental use of the product and the polyresin material are considered to be the essential character. GIR 6 - has been used to classify the goods to subheading level 392640 Statuettes and other ornamental articles Also classified in accordance with: Chapter note 1 to chapter 39 Harmonised System Explanatory Notes to subheading 3926

  • UK 3926400000 Valid Jan 8, 2024 to Jan 7, 2027 · Ruling 600009455 on GOV.UK

    A set of 3 different coloured egg shaped volcano hourglass. Intended to be used for sensory and viewing stimulation. You can flip the egg and watch it erupt inside as coloured snow falls to the bottom. Used as a calming accessory and ideal as a fidget toy. They come in colours black, red and blue. For ages 5 years and upwards. Made from plastic. Packed in a CDU (Card display unit).

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect - a. Part Two (Goods Classification Table Rules of Interpreation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIRs): GIR 1 has been used to classify this product by the terms of heading 3926 - Other articles of plastics and articles of other materials of headings 3901 to 3914. GIR 5 (b) Used to identify the type of packaging. Packed in a (CDU) card display unit. GIR 6 has been used to identify this product by the terms of heading 392640 - Statuettes and other ornamental articles. Also classified in accordance with The Harmonised System Explanatory Notes (HSENs) to heading 3926.

  • UK 3926400000 Valid Jan 8, 2024 to Jan 7, 2027 · Ruling 600009456 on GOV.UK

    An hourglass intended for viewing or sensory stimulation purposes. They come in 6 different colours and designs which include - beads, a skull, panda, slime and a snake tornado. They are filled with water and made from plastic, with the theme travelling up and down the tube to create a sensory viewing. The tube can be hand held or placed or a flat surface. Packed in a card display unit (CDU).

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect- a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIRs): GIR 1 has been used to classify this product by the terms of heading 3926 - Other articles of plastics and articles of other materials of heading 3901 to 3914. GIR 5 (b) Used to identify the type of packaging. Packed in a (CDU) card display unit. GIR 6 has been used to identify this product by the terms of heading 392640 - Statuettes and other ornamental articles. Also classified in accordance with The Harmonised System Explanatory Notes (HSENs) to heading 3926.

+ 12 more
  • UK 3926400000 Valid Mar 15, 2024 to Mar 14, 2027 · Ruling 600009976 on GOV.UK

    The application is for decorative wall art, made from 100% rigid sheet acrylic & laser cut. The wall art are scaled outlines of motor racing circuits. They are normally produced in matt white or matt black, however they can be made in any colour of choice. The Acrylic sheet is laser cut to the desired circuit collection/set. Each set can come in different sizes and can have the circuit name etched on each piece, with the large sizes there is also the option to have the name cut alongside each circuit. To enable them to be fixed to the wall, they are supplied with either putty for the smaller pieces & glue dots or double-sided tape for the larger pieces. The circuits are packaged in card gift boxes.

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 3926: Other articles of plastics and articles of other materials of headings 3901 to 3914. GIR 5 (b) - Has been used to identify the type of packaging: Card boxes. GIR 6 - Has been used to classify the goods to subheading level 392640: Statuettes and other ornamental articles. Also classified in accordance with: Chapter 39 note 1 Harmonised System Explanatory Notes (HSEN) to heading 3926

  • UK 3926400000 Valid Jul 3, 2024 to Jul 2, 2027 · Ruling 600010358 on GOV.UK

    A stone powder and resin ornamental statue depicting a mother and daughter holding hands, with the mother swinging the child around. Both their heads and the child’s feet are painted a darker colour to their bodies. The statues dimensions are 30cm length x 18.8cm width x 41.3cm height. The constituent materials are Polyresin 49%, stone powder 49%, paint 2%. It is packed within a box and put up for retail sale.

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 3926: Other articles of plastics and articles of other materials of headings 3901 to 3914. GIR 3B - Has been used as the polyresin is considered to be the essential character. GIR 5(b) - Has been used to identify the type of packaging: a box. GIR 6 - Has been used to classify the goods to subheading level 392640: Statuettes and other ornamental articles. Also classified in accordance with: General section Chapter 39 note 1 Chapter 39 additional note 2. Harmonised System Explanatory Notes (HSEN) to heading 3926 note (3)

  • UK 3926400000 Valid Nov 20, 2024 to Nov 19, 2027 · Ruling 600010480 on GOV.UK

    A 3D printed themed animal character. The character is a Racoon presented on a barrel holding a bottle. The figurine is made with a steel frame and steel base plate. The frames for the base, barrel, and character are encased in a shell of plastic and filled with expanding foam. The plastic character is completed with a textured coating and a water based topcoat. The life size character (1890mm/6.2ft in high and 750mm/2.4ft in depth) will be used as a promotional prop located at the external queue area at the entrance of the theme park rides but will not be part of the actual ride. This is a static statue with no moving or mechanical parts. The Racoon will be shipped fully assembled for placement at the external queue line area as part of the retheming for a new story at the park.

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect:– a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 Has been used to classify this product by the terms of Heading 3926 - Other articles of plastics and articles of other materials of headings 3901 to 3914. GIR 3 (b) Has been used as the essential character is given by the plastic which provides the details and shape of the character. GIR 6 Has been used to classify the goods to subheading level 392640 - Statuettes and other ornamental articles. Also classified in accordance with: Chapter Note 1 to Chapter 39 Harmonised System Explanatory Notes (HSEN) Notes (3) to Heading 3926

  • UK 3926400000 Valid Sep 30, 2024 to Sep 29, 2027 · Ruling 600011474 on GOV.UK

    A decorations for Halloween. A pack of 40 spiders measuring 4.5 x 4 x 1cm, made from polypropylene . A spiders web is also included made from cotton measuring 24 x 22 x 5cm. It can be used indoors or outdoors. The cobweb can be stretched and is easy to attach to products for a spooky look for Halloween. Packed in a PE bag.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General Interpretative Rules (GIRs): GIR 1 has been used to classify this product by the terms of heading 3926 - Other articles of plastics and articles of other materials of headings 3901 to 3914. GIR 5(b) has been used to identify the type of packaging. Packed in a PE bag. GIR 6 has been used to classify the goods to subheading level 392640 - Statuettes and other ornamental articles. Also classified in accordance with the Harmonised System Explanatory Notes (HSENs) to heading 3926.

  • UK 3926400000 Valid Jan 2, 2025 to Jan 1, 2028 · Ruling 600012018 on GOV.UK

    Trophy Composition of acrylic; also contains Lead Cadmium Mercury hexavalent chromium polybrominated Chromium Biphenyls (PBBS) Polybrominated Diphenyl Ethers (PBDES) The dimensions are bespoke and can vary between 12cm and 30cm and have a thickness of 2cm Packaged in bubble wrap and individual cardboard boxes

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 3926 - Other articles of plastics and articles of other materials of headings 3901 to 3914 GIR 5b has been used to identify the type of packaging – in bubble wrap and individual cardboard boxes GIR 6 has been used to classify the goods to subheading level 392640 – Statuettes and other ornamental articles Also classified in accordance with: Chapter 39 note 1

  • UK 3926400000 Valid Dec 3, 2025 to Dec 2, 2028 · Ruling 600014186 on GOV.UK

    Plastic plant pots without drainage holes. These are for containing plants. These are packaged in bubble wrap. Available in various sizes and colours.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect - a. Part Two (Goods Classification Table Rules of Interpreation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIRs): GIR 1 has been used to classify this product by the terms of heading 3926 - Other articles of plastics and articles of other materials of headings 3901 to 3914. GIR 5 (b) Used to identify the type of packaging. GIR 6 has been used to identify this product by the terms of heading 392640 - Statuettes and other ornamental articles. Also classified in accordance with The Harmonised System Explanatory Notes (HSENs) to heading 3926.

  • UK 3926400000 Valid Apr 7, 2026 to Apr 6, 2029 · Ruling 600015385 on GOV.UK

    Block Styrene photo frame 4" X 6" 10cm x 15cm (approx) Includes easel and hooks for hanging both landscape and portrait Come in 3 colours of choice

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 3926 - Other articles of plastics and articles of other materials of headings 3901 to 3914 GIR 6 has been used to classify the goods to subheading level 392640 – Statuettes and other ornamental articles Also classified in accordance with: Chapter 39 Note 1 Harmonised System Explanatory Notes (HSENs) to heading 3926

  • UK 3926400000 Valid Apr 7, 2026 to Apr 6, 2029 · Ruling 600015386 on GOV.UK

    Block photo frame 5" X 7" 13cm x 18cm (approx) Includes easel and hooks for hanging both landscape and portrait Come in 3 colours of choice

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 3926 - Other articles of plastics and articles of other materials of headings 3901 to 3914 GIR 6 has been used to classify the goods to subheading level 392640 – Statuettes and other ornamental articles Also classified in accordance with: Chapter 39 Note 1 Harmonised System Explanatory Notes (HSENs) to heading 3926

  • UK 3926400000 Valid Apr 7, 2026 to Apr 6, 2029 · Ruling 600015387 on GOV.UK

    Block photo frame 6" X 8" 15cm x 20cm (approx) Includes easel and hooks for hanging both landscape and portrait Come in 3 colours of choice

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 3926 - Other articles of plastics and articles of other materials of headings 3901 to 3914 GIR 6 has been used to classify the goods to subheading level 392640 – Statuettes and other ornamental articles Also classified in accordance with: Chapter 39 Note 1 Harmonised System Explanatory Notes (HSENs) to heading 3926

  • UK 3926400000 Valid Apr 7, 2026 to Apr 6, 2029 · Ruling 600015388 on GOV.UK

    Block photo frame 8" X 10 20cm x 25cm (approx) Includes easel and hooks for hanging both landscape and portrait Come in 3 colours of choice

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 3926 - Other articles of plastics and articles of other materials of headings 3901 to 3914 GIR 6 has been used to classify the goods to subheading level 392640 – Statuettes and other ornamental articles Also classified in accordance with: Chapter 39 Note 1 Harmonised System Explanatory Notes (HSENs) to heading 3926

  • UK 3926400000 Valid Apr 7, 2026 to Apr 6, 2029 · Ruling 600015389 on GOV.UK

    Block photo frame A4 21cm x 29cm (approx) Includes easel and hooks for hanging both landscape and portrait Come in 3 colours of choice

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 3926 - Other articles of plastics and articles of other materials of headings 3901 to 3914 GIR 6 has been used to classify the goods to subheading level 392640 – Statuettes and other ornamental articles Also classified in accordance with: Chapter 39 Note 1 Harmonised System Explanatory Notes (HSENs) to heading 3926

  • UK 3926400000 Valid Oct 2, 2026 to Oct 1, 2029 · Ruling 600016616 on GOV.UK

    A plastic 1/7th scale statuette depicting a character from an anime series. The statuette stands approximately 23 cm tall. It depicts a male human with brown hair wearing a blue kimono, it is holding a white and red mask within its left hand. The statuette is fixed to a base; the base is made from plastic and designed to resemble a brown wooden bridge with a red fence behind the statuette. It is packaged within a cardboard box with a plastic window and a plastic insert. For ages 15 years+. Put up for retail sale.

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect : a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General Interpretative Rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 3926: Other articles of plastics and articles of other materials of headings 3901 to 3914. GIR 5 B - Has been used to identify the type of packaging; Cardboard box with a clear plastic window and a plastic insert. GIR 6 - Has been used to classify the goods to subheading level 392640: Statuettes and other ornamental articles. Also classified in accordance with: Chapter 39 note 1 Harmonized System Explanatory Notes (HSEN’s) to heading 3926 Tribunals TC/2019/02162 dated 22122023.

Source: HM Revenue & Customs, Advance Tariff Rulings. Contains public sector information licensed under the Open Government Licence v3.0.

Restrictions and flags for 39264000

  • Russia sanctions: import ban Regulation (EU) No 833/2014, Annex XXI 3926

    Art. 3i, goods generating significant revenue for Russia

    Read the act on EUR-Lex

For orientation only. Check the act before you rely on a flag; thresholds, derogations and exceptions are not shown in full.

EU trade in 2025 for 39264000

Extra-EU imports
€622.1M
89,426 t
Extra-EU exports
€97.3M

Top origin countries by import value

  1. China €549.3M
  2. Vietnam €13.6M
  3. Japan €8.9M
  4. United Kingdom €8.7M
  5. United States €8.4M

Figures for CN8 code 39264000. Source: Eurostat, Comext, CC BY 4.0, processed by hscode.info. Confidential trade is not allocated to codes.

UK import duty for 392640

  • 6%

Third-country duties of all UK commodity codes under this HS subheading. Source: UK Department for Business and Trade, as of Nov 2, 2026. The UK tariff differs from the EU tariff.

Import VAT in the EU

  • Austria 20 %
  • Belgium 21 %
  • Bulgaria 20 %
  • Croatia 25 %
  • Cyprus 19 %
  • Czechia 21 %
  • Denmark 25 %
  • Estonia 24 % maybe 9 %
  • Finland 25.5 %
  • France 20 %
  • Germany 19 %
  • Greece 24 % maybe 6 %, 13 %
  • Hungary 27 %
  • Ireland 23 %
  • Italy 22 %
  • Latvia 21 %
  • Lithuania 21 %
  • Luxembourg 17 %
  • Malta 18 %
  • Netherlands 21 %
  • Poland 23 %
  • Portugal 23 %
  • Romania 21 %
  • Slovakia 23 %
  • Slovenia 22 %
  • Spain 21 %
  • Sweden 25 %

Standard rate per member state, on the customs value, the duty and transport to the destination. Reduced rates often depend on the use or the buyer and apply only where the country provides them for these goods. Source: European Commission, Taxes in Europe Database, as of Nov 2, 2026.

Rules of origin

Preferential rules of origin for subheading 392640 depend on the trade agreement. The Commission publishes them in Access2Markets.

Rules of origin on Access2Markets

Information

When importing or exporting "Statuettes and other ornamental articles", it is crucial to have the correct HS code or TARIC code. The HS code 3926400000 80 serves as the standard code for this product, ensuring that the appropriate duties and taxes are applied when crossing international borders.

To ensure your business transactions run smoothly when importing or exporting "Statuettes and other ornamental articles", consider the following points:

  1. Inform yourself about the specific import and export regulations in the countries involved. This includes possible restrictions, taxes, and duties applicable to "Statuettes and other ornamental articles".
  2. Check if any additional licenses, permits, or certificates are required to import "Statuettes and other ornamental articles" into the destination country or export it from the country of origin.
  3. Make sure your trading partners have valid identification numbers, such as EORI numbers (Economic Operators Registration and Identification) in the EU, to streamline trade and minimize delays.
  4. Ensure that all trade- and customs-related documents (such as commercial invoices, packing lists, certificates of origin, and insurance policies) are accurately completed and adhere to the respective national regulations.
  5. Keep an eye on the current exchange rates, as well as packaging, shipping, and insurance costs, to accurately calculate trade costs.

In summary, the HS code or TARIC code for "Statuettes and other ornamental articles" is 3926400000 80. Make sure you accurately use this code in all your trade and customs documents to guarantee smooth and hassle-free transactions. With these tips, you'll be better prepared for the challenges of international trade and can successfully import and export "Statuettes and other ornamental articles".

HS Code structure

39
Chapter
26
Heading
40
Subheading
00
CN Subheading
00
TARIC Subheading
80
Additional TARIC codes

1. Chapter

There are 21 different sections, which are divided into 96 chapters. Exceptional chapters include chapter 77, which is reserved for future use, chapters 98 and 99, which are limited at national level, and chapter 99, which is a specific code for temporary changes. In the example above, chapter 39 was selected for plastics and articles thereof

2. Heading

The heading determines the specific category within a certain chapter. In the example above, the 26 refers to Other articles of plastics and articles of other materials of headings 3901 to 3914.

3. Subheading

The last two digits of the international harmonized code are more specific and define subcategories of products. In the example above, the 40 refers to Statuettes and other ornamental articles.

HS Code tree structure

3900000000 80

Chapter PLASTICS AND ARTICLES THEREOF

3926000000 80

Other articles of plastics and articles of other materials of headings 3901 to 3914

3926100000 80

- Office or school supplies

3926200000 80

- Articles of apparel and clothing accessories (including gloves, mittens and mitts)

3926300000 80

- Fittings for furniture, coachwork or the like

3926300040 80

- - Plastic internal door handle used in the manufacture of motor vehicles

3926300050 80

- - Coated interior or exterior decorative parts consisting of: -a copolymer of acrylonitrile-butadiene-styrene (ABS), whether or not mixed with polycarbonate, and -a PVC foil, -not containing layers of copper, nickel or chromium, for use in the manufacturing of parts for motor vehicles of heading 8701 to 8705

3926300090 80

- - Other

3926400000 80

- Statuettes and other ornamental articles

3926900000 80

- Other

3926905000 80

- - Perforated buckets and similar articles used to filter water at the entrance to drains

3926906000 80

- - Protective face shields/visors

3926909700 80

- - Other

3926909705 80

- - - For technical uses, for use in civil aircraft

3926909710 80

- - - Microspheres of a polymer of divinylbenzene, of a diameter of 4,5 µm or more but not more than 80 µm

3926909722 80

- - - Gaskets for road vehicles mirrors and their components, made of polyethylene foam, produced by a thermoforming process and with: -a density of 20 kg/m³ or more, but not more than 40 kg/m³, -a tensile strength of not less than 170 kPa, -water absorption coefficient of not greater than 1 %, -a length of 5 mm or more but not more than 300 mm, -a height of 10 mm or more but not more than 400 mm, -a depth of 5 mm or more but not more than 250 mm

3926909723 80

- - - Plastic cover with clips for the exterior rear-view mirror of motor vehicles

3926909727 80

- - - Gasket of polyethylene foam, intended to fill-up the space between the body of a motor vehicle and the base of a rear-view mirror

3926909730 80

- - - Parts of car radio and car air-conditioner front panels - of acrylonitrile-butadiene-styrene with or without polycarbonate, - coated with a copper, a nickel and a chrome layers, - with a total thickness of coating of 5,54 μm or more but not more than 49,6 μm

3926909733 80

- - - Housings, housing parts, drums, setting wheels, frames, covers, upper part, design plate and other parts of acrylonitrile-butadiene-styrene, polycarbonate, polymethylmethacrylate or thermoplastic polyurethane, of a kind used for the manufacture of remote controls

3926909740 80

- - - Silicone shell for breast implant 

3926909743 80

- - - Mixture of water and by weight 19 % or more but not more than 35 % of expanded hollow microspheres of a copolymer of acrylonitrile, methacrylonitrile and isobornyl methacrylate or other methacrylate, of a diameter of 3 µm or more but not more than 4,95 μm

3926909748 80

- - - Coated interior or exterior decorative parts consisting of: -a copolymer of acrylonitrile-butadiene-styrene (ABS), whether or not mixed with polycarbonate, and -a PVC foil, -not containing layers of copper, nickel or chromium, for use in the manufacturing of parts for motor vehicles of heading 8701 to 8705

3926909758 80

- - - Plastic ferrules and/or plugs: -supported with or without a stainless steel ring, -suitable for a maximum working pressure rate of 2,7 MPa or more but not more than 114 MPa, for tubings with: -outer diameter of 0,33 mm or more but not more than 3,3 mm, -suitable for a maximum working pressure rate of 2,7 MPa or more but not more than 114 MPa, -suitable for all solutions used in chromatography, for use in the production of chromatographic systems

3926909760 80

- - - Sheath contraceptives of polyurethane

3926909777 80

- - - Silicone decoupling ring with an inner diameter of 13,2 mm or more but no more than 17,2 mm, in immediate packings of 2 500 pieces or more, of a kind used in car parking aid sensor systems

3926909790 80

- - - Other