New Describe a product, get the CN code. Also as API and MCP for AI agents. Try it free
Jump to content

Tariff number 3926906000 80 - Protective face shields/visors

Import trade restrictions for 3926906000 80

This table contains information on trade restrictions for the import of goods into the EU and the EU into third countries. The table contains information on trade restrictions which are imposed due to customs unions, preferences, tariff quotas, customs unions, veterinary controls, third country duties and non-preferential tariff quotas.

Duties 69
1007
EU-Switzerland agreement: re-imported goods 1007
01-01-2007
0 %
Tariff preference 142
MK
North Macedonia MK
01-01-2009
0 %
Tariff preference 142
BA
Bosnia and Herzegovina BA
01-01-2009
0 %
Tariff preference 142
2020
GSP - General arrangements 2020
01-01-2023
0 %
Tariff preference 142
SG
Singapore SG
01-01-2027
0 %
Tariff preference 142
XS
Serbia XS
01-02-2010
0 %
Tariff preference 142
AL
Albania AL
01-04-2009
0 %
Tariff preference 142
XK
Kosovo XK
01-04-2016
0 %
Tariff preference 142
ME
Montenegro ME
01-05-2010
0 %
Tariff preference 142
NZ
New Zealand NZ
01-05-2024
0 %
Tariff preference 142
1011
ERGA OMNES 1011
01-11-2018
0 %
Airworthiness tariff suspension 119
AM
Armenia AM
10-10-2026
– 11-10-2028
0 %
Tariff preference 142
CH
Switzerland CH
20-12-1972
0 %
Tariff preference 142
SG
Singapore SG
21-11-2019
– 31-12-2026
0 %
Tariff preference 142
CA
Canada CA
01-01-2021
0 %
Tariff preference 142
PE
Peru PE
01-01-2021
0 %
Tariff preference 142
JP
Japan JP
01-01-2021
0 %
Tariff preference 142
UA
Ukraine UA
01-01-2021
0 %
Tariff preference 142
1006
EU-Canada agreement: re-imported goods 1006
01-01-2021
0 %
Tariff preference 142
1011
ERGA OMNES 1011
01-01-2021
0 %
Suspension - goods for certain categories of ships, boats and other vessels and for drilling or production platforms 117
1011
ERGA OMNES 1011
01-01-2021
6.5 %
Third country duty 103
1011
ERGA OMNES 1011
01-01-2021
NAR
Supplementary unit 109
5500
Mercosur 5500
01-05-2026
– 31-12-2026
5.2 %
Tariff preference 142
FO
Faroe Islands FO
01-01-1997
0 %
Tariff preference 142
XL
Melilla XL
01-01-1999
0 %
Accession act0001/85
Tariff preference 142
PS
Occupied palestinian Territory PS
01-01-2001
0 %
Tariff preference 142
AD
Andorra AD
01-01-2006
0 %
Customs union duty 106
SM
San Marino SM
01-01-2006
0 %
Customs union duty 106
TR
Türkiye TR
01-01-2006
0 %
Customs union duty 106
2027
GSP+ (incentive arrangement for sustainable development and good governance) 2027
01-01-2014
0 %
Tariff preference 142
2005
GSP-EBA (Special arrangement for the least-developed countries - Everything But Arms) 2005
01-01-2014
0 %
Tariff preference 142
MD
Moldova, Republic of MD
01-01-2016
0 %
Tariff preference 142
EC
Ecuador EC
01-01-2017
0 %
Tariff preference 142
GB
United Kingdom GB
01-01-2021
0 %
Tariff preference 142
2080
OCTs (Overseas Countries and Territories) 2080
01-01-2021
0 %
Tariff preference 142
GH
Ghana GH
01-01-2027
0 %
Tariff preference 142
CL
Chile CL
01-02-2025
0 %
Tariff preference 142
TN
Tunisia TN
01-03-1998
0 %
Tariff preference 142
MA
Morocco MA
01-03-2000
0 %
Tariff preference 142
LB
Lebanon LB
01-04-2006
0 %
Tariff preference 142
JO
Jordan JO
01-05-2002
0 %
Tariff preference 142
EG
Egypt EG
01-06-2004
0 %
Tariff preference 142
XC
Ceuta XC
01-07-1991
0 %
Accession act0001/85
Tariff preference 142
2012
EEA - European Economic Area 2012
01-07-2007
0 %
Tariff preference 142
KR
Korea, Republic of (South Korea) KR
01-07-2014
0 %
Tariff preference 142
MX
Mexico MX
01-07-2016
0 %
Tariff preference 142
KE
Kenya KE
01-07-2024
0 %
Tariff preference 142
US
United States US
01-07-2026
0 %
Tariff preference 142
SY
Syria SY
01-08-1994
0 %
Tariff preference 142
CO
Colombia CO
01-08-2013
0 %
Tariff preference 142
2200
Central America 2200
01-08-2013
0 %
Tariff preference 142
VN
Viet Nam VN
01-08-2020
0 %
Tariff preference 142
DZ
Algeria DZ
01-09-2005
0 %
Tariff preference 142
GE
Georgia GE
01-09-2014
0 %
Tariff preference 142
1011
ERGA OMNES 1011
01-11-2026
2 EUR
Union handling fee 800
1011
ERGA OMNES 1011
01-11-2026
3 EUR
Low-value consignment customs duty 107
CI
Ivory Coast CI
02-12-2019
0 %
Tariff preference 142
2000
Preferential origin in accordance with the Agreement in the form of an Exchange of Letters between the European Union and the Kingdom of Morocco on the amendment of Protocols 1 and 4 to the Euro-Mediterranean Agreement establishing an association between the European Communities and their Member States, of the one part, and the Kingdom of Morocco, of the other part. 2000
03-10-2025
0 %
Tariff preference 142
CM
Cameroon CM
04-08-2014
0 %
Tariff preference 142
1035
SADC EPA 1035
10-10-2016
0 %
Tariff preference 142
ZA
South Africa ZA
10-10-2016
0 %
Tariff preference 142
1034
Eastern and Southern Africa States 1034
14-05-2012
0 %
Tariff preference 142
GH
Ghana GH
15-12-2016
– 31-12-2026
0 %
Tariff preference 142
IL
Israel IL
16-05-2023
0 %
Tariff preference 142
SB
Solomon Islands SB
17-05-2020
0 %
Tariff preference 142
PG
Papua New Guinea PG
20-12-2009
0 %
Tariff preference 142
FJ
Fiji FJ
28-07-2014
0 %
Tariff preference 142
1033
CARIFORUM 1033
29-12-2008
0 %
Tariff preference 142
WS
Samoa WS
31-12-2018
0 %
Tariff preference 142
Controls and documents 6
RU
Russian Federation RU
19-12-2023
– 31-12-2027
Document required
banned without it
Import control 762
BY
Belarus BY
25-02-2025
Document required
banned without it
Import control 760
RU
Russian Federation RU
20-07-2025
Document required
banned without it
Import/export restriction - Common Military List (CML) goods 738
BY
Belarus BY
20-07-2025
Document required
banned without it
Import control 731
UA
Ukraine UA
24-06-2026
Document required
banned without it
Import control 762
UA
Ukraine UA
24-06-2026
Document required
banned without it
Import control 760

Explanation of trade restrictions

Erga Omnes means "for all".

Third countries are countries that are not part of the EU.

GSP means "Generalised System of Preferences".

GSP Plus means "Generalised System of Preferences Plus".

European Economic Area (EEA) means all EU member states and Iceland, Liechtenstein and Norway.

OCTs stands for "Overseas Countries and Territories". They are countries and territories that are not part of the EU. More information

CARIFORUM is a regional economic integration organisation comprising 15 Caribbean Community (CARICOM) countries and the Dominican Republic.

SADC EPA stands for "Southern African Development Community - Economic Partnership Agreement".

Duty means "customs duties".

Estimate the import cost for 39269060

  • Customs value €1,000.00
  • Customs duty 6.5 % €65.00
  • Import VAT 19 % €202.35
  • Total €1,267.35

May be lower under conditions:

  • Airworthiness tariff suspension: 0 %
  • Suspension - goods for certain categories of ships, boats and other vessels and for drilling or production platforms: 0 %

An estimate only. The customs value is the price including transport and insurance to the EU border. Excise duties, other fees and producer-specific anti-dumping rates are not included. Preferential rates need valid proof of origin. Country groups and exclusions: TARIC, as of November 2026.

Export measures for 3926906000

What applies when these goods leave the EU: export controls, dual-use and other authorisations, bans per destination and the supplementary unit of the export declaration.

Measures 1
1011
ERGA OMNES 1011
01-01-2021
NAR
Supplementary unit 109
Controls and documents 6
BY
Belarus BY
20-07-2025
Document required
banned without it
Export control 766
RU
Russian Federation RU
22-01-2026
Document required
banned without it
Export control 709
ZW
Zimbabwe ZW
19-02-2026
Document required
banned without it
Export control 737
BY
Belarus BY
20-07-2025
Document required
banned without it
Export control 737
RU
Russian Federation RU
20-07-2025
Document required
banned without it
Import/export restriction - Common Military List (CML) goods 738
CD
Congo, Democratic Republic of CD
28-10-2026
Document required
banned without it
Export control 737

History

Duty rates and measures for this code over time (yearly snapshots).

Preferential rules of origin for 3926906000

What the goods must meet to count as originating in a partner country and get the preferential duty, per agreement.

  • Autonomous Trade Preferences (Western Balkans) · Kosovo

    EU-Algeria Association Agreement · Algeria

    EU-Egypt Association Agreement · Egypt

    EU-Jordan Association Agreement · Jordan

    EU-Lebanon Association Agreement · Lebanon

    EU-Morocco Association Agreement · Morocco

    EU-Tunisia Association Agreement · Tunisia

    Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product [13] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [14] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [15] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [16] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [17] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [18] The following foils shall be considered as highly transparent: foils, the optical dimming of which, measured according to ASTM-D 1003-16 by Gardner Hazemeter (i.e. Hazefactor), is less than 2 %.

  • EEA/EFTA agreements (Switzerland, Norway, Liechtenstein, Faroe Islands) · Faroe Islands, Liechtenstein, Norway, Switzerland

    EU-Iceland FTA · Iceland

    EU-Ukraine DCFTA · Ukraine

    Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product [13] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [18] The following foils shall be considered as highly transparent: foils, the optical dimming of which, measured according to ASTM-D 1003-16 by Gardner Hazemeter (i.e. Hazefactor), is less than 2 %.

  • EPA CARIFORUM

    EU-Korea FTA · South Korea

    Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

  • EU-Canada CETA · Canada

    A change from any other heading.

  • EU-Chile Association Agreement · Chile

    Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product [13] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [14] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [15] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [16] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [17] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [18] The following foils shall be considered as highly transparent: foils, the optical dimming of which, measured according to ASTM-D 1003—16 by Gardner Hazemeter (i.e. Hazefactor), is less than 2 %.

  • EU-Colombia/Peru/Ecuador Trade Agreement · Colombia, Ecuador, Peru

    Plastics and articles thereof / or: Manufacture from materials of any heading, except that of the product / or: Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

  • EPA Eastern and Southern Africa

    Rubber and articles thereof; except for: / or: Manufacture in which all the materials used are classified within a heading other than that of the product [13] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [18] The following foils shall be considered as highly transparent: foils, the optical dimming of which – measured according to ASTM-D 1003-16 by Gardner Hazemeter (i.e. Hazefactor) – is less than 2 per cent.

  • EU Market Access Regulation (EPA) · Cameroon, Côte d’Ivoire, Ghana, Kenya

    Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product [16] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [17] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [18] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [19] The following foils shall be considered as highly transparent: foils, the optical dimming of which - measured according to ASTM-D 1003-16 by Gardner Hazemeter (i.e. Hazefactor) - is less than 2 percent.

  • EPA Pacific · Fiji, Papua New Guinea, Samoa, Solomon Islands

    Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product [13] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [18] The following foils shall be considered as highly transparent: foils, the optical dimming of which - measured according to ASTM-D 1003-16 by Gardner Hazemeter (i.e. Hazefactor) - is less than 2 %.

  • EU-Georgia DCFTA · Georgia

    Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product [15] Note 3 to Chapter 32 says that these preparations are those of a kind used for colouring any material or used as ingredients in the manufacture of colouring preparations, provided that they are not classified in another heading in Chapter 32. / or: [20] A ‘group’ is regarded as any part of the heading separated from the rest by a semicolon.

  • Generalised Scheme of Preferences (GSP, GSP+, EBA) · Armenia, India, Kenya, Pakistan, Samoa, Solomon Islands, Syria, Vietnam

    Plastics and articles thereof; except for: / or: (a) LDCs Manufacture from materials of any heading, except that of the product. or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product / or: (b) Other beneficiary countries Manufacture from materials of any heading, except that of the product. or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

  • EU-Israel Association Agreement · Israel

    Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product [22] In the case of the products composed of materials classified both within heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [24] In the case of the products composed of materials classified both within heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [25] In the case of the products composed of materials classified both within heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [28] The following foils shall be considered as highly transparent: foils, the optical dimming of which, measured according to ASTM-D 1003-16 by Gardner Hazemeter (Hazefactor), is less than 2 %.

  • EU-Japan EPA · Japan

    CTH; MaxNOM 50 % (EXW); or RVC 55 % (FOB).

  • EU-Central America Association Agreement

    Articles of plastics / or: Manufacture from materials of any heading, except that of the product / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

  • EU-Moldova DCFTA · Moldova

    Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product [20] The following foils shall be considered as highly transparent: foils, the optical dimming of which, measured according to ASTM-D 1003-16 by Gardner Hazemeter (i.e. Hazefactor), is less than 2 %.

  • EU-Mexico Global Agreement · Mexico

    Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product [15] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [16] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [17] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [18] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [19] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [20] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [21] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [22] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [23] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [24] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [25] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [26] The following foils shall be considered as highly transparent: foils, the optical dimming of which - measured according to ASTM-D 1003-16 by Gardner Hazemeter (i.e. Hazefactor) - is less than 2 %.

  • Pan-Euro-Mediterranean (PEM) Convention · Albania, Andorra, Bosnia & Herzegovina, Egypt, Faroe Islands, Iceland, Kosovo, Liechtenstein, Montenegro, North Macedonia, Norway, Palestine, Switzerland, Türkiye

    Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product [15] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within heading 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [20] The following foils shall be considered as highly transparent: foils, the optical dimming of which, measured according to ASTM-D 1003-16 by Gardner Hazemeter (i.e. Hazefactor), is less than 2%.

  • EU-Palestine Interim Association Agreement · Palestine

    Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product [1] In the case of the products composed of materials classified within both heading Nos. 3901 to 3906, on the one hand, and within heading Nos. 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [1] The following foils shall be considered as highly transparent: foils, the optical dimming of which - measured according to ASTM-D 1003-16 by Gardner Hazemeter (i.e. Hazefactor) - is less than 2 percent.

  • EPA SADC · South Africa

    Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex–works price of the product [18] In the case of the products composed of materials classified both within heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to the group of materials which predominates by weight in the product. / or: [19] In the case of the products composed of materials classified both within heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to the group of materials which predominates by weight in the product. / or: [21] In the case of the products composed of materials classified both within heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to the group of materials which predominates by weight in the product. / or: [23] The following foils shall be considered as highly transparent: foils, the optical dimming of which — measured according to ASTM-D 1003-16 by Gardener Hazemeter (i.e. Hazefactor) — is less than 2 percent.

  • EU-Singapore FTA · Singapore

    Manufacture from materials of any heading, except that of the product. However materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-work price of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product [21] In the case of the products composed of materials classified within both headings 3901 to 3906, and in the case of the products within headings 3907 to 3911, this restriction only applies to that group of materials which predominates by weight in the product.

Source: European Commission, Access2Markets (CC BY 4.0, shortened). The text of the agreement prevails. Access2Markets

Legal and explanatory notes for 3926906000

Notes to chapter 39

Notes 1. Throughout the nomenclature, the expression ‘plastics’ means those materials of headings 3901 to 3914 which are or have been capable, either at the moment of polymerisation or at some subsequent stage, of being formed under external influence (usually heat and pressure, if necessary with a solvent or plasticiser) by moulding, casting, extruding, rolling or other process into shapes which are retained on the removal of the external influence. Throughout the nomenclature, any reference to ‘plastics’ also includes vulcanised fibre. The expression, however, does not apply to materials regarded as textile materials of Section XI. 2. This chapter does not cover: (a) lubricating preparations of heading 2710 or 3403; (b) waxes of heading 2712 or 3404; (c) separate chemically defined organic compounds (Chapter 29); (d) heparin or its salts (heading 3001); (e) solutions (other than collodions) consisting of any of the products specified in headings 3901 to 3913 in volatile organic solvents when the weight of the solvent exceeds 50 % of the weight of the solution (heading 3208); stamping foils of heading 3212; (f) organic surface-active agents or preparations of heading 3402; (g) run gums or ester gums (heading 3806); (h) prepared additives for mineral oils (including gasoline) or for other liquids used for the same purposes as mineral oils (heading 3811); (ij) prepared hydraulic fluids based on polyglycols, silicones or other polymers of Chapter 39 (heading 3819); (k) diagnostic or laboratory reagents on a backing of plastics (heading 3822); (l) synthetic rubber, as defined for the purposes of Chapter 40, or articles thereof; (m) saddlery or harness (heading 4201) or trunks, suitcases, handbags or other containers of heading 4202; (n) plaits, wickerwork or other articles of Chapter 46; (o) wallcoverings of heading 4814; (p) goods of Section XI (textiles and textile articles); (q) articles of Section XII (for example, footwear, headgear, umbrellas, sun umbrellas, walking sticks, whips, riding-crops or parts thereof); (r) imitation jewellery of heading 7117; (s) articles of Section XVI (machines and mechanical or electrical appliances); (t) parts of aircraft or vehicles of Section XVII; (u) articles of Chapter 90 (for example, optical elements, spectacle frames, drawing instruments); (v) articles of Chapter 91 (for example, clock or watch cases); (w) articles of Chapter 92 (for example, musical instruments or parts thereof); (x) articles of Chapter 94 (for example, furniture, luminaires and lighting fittings, illuminated signs, prefabricated buildings); (y) articles of Chapter 95 (for example, toys, games, sports requisites); or (z) articles of Chapter 96 (for example, brushes, buttons, slide fasteners, combs, mouthpieces or stems for smoking pipes, cigarette-holders or the like, parts of vacuum flasks or the like, pens, propelling pencils, and monopods, bipods, tripods and similar articles). 3. Headings 3901 to 3911 apply only to goods of a kind produced by chemical synthesis, falling in the following categories: (a) liquid synthetic polyolefins of which less than 60 % by volume distils at 300 °C, after conversion to 1 013 mbar when a reduced-pressure distillation method is used (headings 3901 and 3902); (b) resins, not highly polymerised, of the coumarone-indene type (heading 3911); (c) other synthetic polymers with an average of at least five monomer units; (d) silicones (heading 3910); (e) resols (heading 3909) and other prepolymers. 4. The expression ‘copolymers’ covers all polymers in which no single monomer unit contributes 95 % or more by weight to the total polymer content. For the purposes of this chapter, except where the context otherwise requires, copolymers (including co-polycondensates, co-polyaddition products, block copolymers and graft copolymers) and polymer blends are to be classified in the heading covering polymers of that comonomer unit which predominates by weight over every other single comonomer unit. For the purposes of this note, constituent comonomer units of polymers falling in the same heading shall be taken together. If no single comonomer unit predominates, copolymers or polymer blends, as the case may be, are to be classified in the heading which occurs last in numerical order among those which equally merit consideration. 5. Chemically modified polymers, that is those in which only appendages to the main polymer chain have been changed by chemical reaction, are to be classified in the heading appropriate to the unmodified polymer. This provision does not apply to graft copolymers. 6. In headings 3901 to 3914, the expression ‘primary forms’ applies only to the following forms: (a) liquids and pastes, including dispersions (emulsions and suspensions) and solutions; (b) blocks of irregular shape, lumps, powders (including moulding powders), granules, flakes and similar bulk forms. 7. Heading 3915 does not apply to waste, parings and scrap of a single thermoplastic material, transformed into primary forms (headings 3901 to 3914). 8. For the purposes of heading 3917, the expression ‘tubes, pipes and hoses’ means hollow products, whether semi-manufactured or finished products, of a kind generally used for conveying, conducting or distributing gases or liquids (for example, ribbed garden hose, perforated tubes). This expression also includes sausage casings and other lay-flat tubing. However, except for the last mentioned, those having an internal cross-section other than round, oval, rectangular (in which the length does not exceed one-and-a-half times the width) or in the shape of a regular polygon are not to be regarded as tubes, pipes and hoses but as profile shapes. 9. For the purposes of heading 3918, the expression ‘wall or ceiling coverings of plastics’ applies to products in rolls, of a width not less than 45 cm, suitable for wall or ceiling decoration, consisting of plastics fixed permanently on a backing of any material other than paper, the layer of plastics (on the face side) being grained, embossed, coloured, design-printed or otherwise decorated. 10. In headings 3920 and 3921, the expression ‘plates, sheets, film, foil and strip’ applies only to plates, sheets, film, foil and strip (other than those of Chapter 54) and to blocks of regular geometric shape, whether or not printed or otherwise surface-worked, uncut or cut into rectangles (including squares) but not further worked (even if when so cut they become articles ready for use). 11. Heading 3925 applies only to the following articles, not being products covered by any of the earlier headings of sub-chapter II: (a) reservoirs, tanks (including septic tanks), vats and similar containers, of a capacity exceeding 300 litres; (b) structural elements used, for example, in floors, walls or partitions, ceilings or roofs; (c) gutters and fittings therefor; (d) doors, windows and their frames and thresholds for doors; (e) balconies, balustrades, fencing, gates and similar barriers; (f) shutters, blinds (including venetian blinds) and similar articles and parts and fittings thereof; (g) large-scale shelving for assembly and permanent installation, for example, in shops, workshops, warehouses; (h) ornamental architectural features, for example, flutings, cupolas, dovecotes; and (ij) fittings and mountings intended for permanent installation in or on doors, windows, staircases, walls or other parts of buildings, for example, knobs, handles, hooks, brackets, towel rails, switch-plates and other protective plates. Subheading notes 1. Within any one heading of this chapter, polymers (including copolymers) and chemically modified polymers are to be classified according to the following provisions: (a) where there is a subheading named ‘Other’ in the same series: (1) the designation in a subheading of a polymer by the prefix ‘poly’ (for example, polyethylene and polyamide-6,6) means that the constituent monomer unit or monomer units of the named polymer taken together must contribute 95 % or more by weight of the total polymer content; (2) the copolymers named in subheadings 3901 30, 3901 40, 3903 20, 3903 30 and 3904 30 are to be classified in those subheadings, provided that the comonomer units of the named copolymers contribute 95 % or more by weight of the total polymer content; (3) chemically modified polymers are to be classified in the subheading named ‘Other’, provided that the chemically modified polymers are not more specifically covered by another subheading; (4) polymers not meeting (1), (2) or (3) above, are to be classified in the subheading, among the remaining subheadings in the series, covering polymers of that monomer unit which predominates by weight over every other single comonomer unit. For this purpose, constituent monomer units of polymers falling in the same subheading shall be taken together. Only the constituent comonomer units of the polymers in the series of subheadings under consideration are to be compared; (b) where there is no subheading named ‘Other’ in the same series: (1) polymers are to be classified in the subheading covering polymers of that monomer unit which predominates by weight over every other single comonomer unit. For this purpose, constituent monomer units of polymers falling in the same subheading shall be taken together. Only the constituent comonomer units of the polymers in the series under consideration are to be compared; (2) chemically modified polymers are to be classified in the subheading appropriate to the unmodified polymer. Polymer blends are to be classified in the same subheading as polymers of the same monomer units in the same proportions. 2. For the purposes of subheading 3920 43, the term ‘plasticisers’ includes secondary plasticisers. Additional note 1. Where the woven, knitted or crocheted fabrics, felt or nonwovens are present merely for reinforcing purposes, gloves, mittens or mitts impregnated, coated or covered with cellular plastics belong to Chapter 39, even if they are: — made up from woven, knitted or crocheted fabrics (other than those of heading 5903), felt or nonwovens impregnated, coated or covered with cellular plastics, or — made up from unimpregnated, uncoated or uncovered woven, knitted or crocheted fabrics, felt or nonwovens and subsequently impregnated, coated or covered with cellular plastics. (Note 3(c) to Chapter 56 and note 2(a)(5) to Chapter 59).

Notes to section VII

PLASTICS AND ARTICLES THEREOF; RUBBER AND ARTICLES THEREOF Notes 1. Goods put up in sets consisting of two or more separate constituents, some or all of which fall in this section and are intended to be mixed together to obtain a product of Section VI or VII, are to be classified in the heading appropriate to that product, provided that the constituents are: (a) having regard to the manner in which they are put up, clearly identifiable as being intended to be used together without first being repacked; (b) presented together; and (c) identifiable, whether by their nature or by the relative proportions in which they are present, as being complementary one to another. 2. Except for the goods of heading 3918 or 3919, plastics, rubber, and articles thereof, printed with motifs, characters or pictorial representations, which are not merely subsidiary to the primary use of the goods, fall in Chapter 49.

Other explanatory notes for the chapter

General The HS Explanatory Note to Chapter 39, General, ‘Combinations of plastics and materials other than textiles’, point (d), applies, mutatis mutandis, to combinations of carbon fibres and plastics.

Note 4 Calculation of mass ratios of monomer units in copolymers: The mass ratios of the respective monomer units in copolymer chains are calculated based on the molecular structure of the copolymer (not the starting materials), taking into account the formation reaction of the polymer. When applicable, the atom linking two adjacent monomer units is attributed to the monomer unit from which the atom originates. The following examples illustrate the calculation of the monomer unit content in copolymers: — In poly(ethylene terephthalate), which is a polyester comprised of terephthalic acid and ethylene glycol moieties, both alcoholic oxygens are attributed to the glycol monomer unit. Hence, ethylene glycol is calculated as C2H4O2, and terephthalate is calculated as C8H4O2. — In polyamide-6,6, which is a polyamide comprised of hexamethylenediamine and adipic acid, both nitrogen atoms are attributed to the diamine monomer unit. Hence, hexamethylenediamine is calculated as C6H14N2 and adipic acid is calculated as C6H8O2.

Note 6 The term ‘solutions’, used both in this note and in note 4 to Chapter 32, does not apply to colloidal solutions.

Sources: Combined Nomenclature 2026, Annex I to Regulation (EEC) No 2658/87 (CELEX 32025R1926), and the Explanatory Notes to the Combined Nomenclature (CELEX 02019XC0329(02)-20260213). The section and chapter notes are legally binding; the explanatory notes are guidance. EUR-Lex

EU classification regulations for 3926906000

Commission regulations that classified specific goods under this code. They bind customs in every member state for identical goods.

  • 3926 90 60 Dec 16, 2020 · Regulation on EUR-Lex
    A rectangular bag consisting of a moulded silicone elastomer body. It measures approximately 16,5 cm in length, 10 cm in height and 2,5 cm in width. It has an attached loop-handle of the same material and a closing system (zip-fastener).

    The article is produced in a single step, with integrated parts (loop-handle and zip-fastener), and has no internal fittings. The article is designed to carry and protect various small objects. See images (*1).

    Reasons

    Classification is determined by general rules 1 and 6 for the interpretation of the Combined Nomenclature and the wording of CN codes 3926 , 3926 90 and 3926 90 97 . Classification under heading 4202 is excluded because that heading covers only the articles specifically named therein and similar containers (see also the Harmonised System Explanatory Notes (HSEN) to heading 4202 , first paragraph). Given its objective characteristics (in particular, the plain interior and the small size), the article is not considered to be a suitcase, vanity case, executive-case, briefcase, school satchel or similar container of the first part of heading 4202 . The article is not considered to be a similar container of the first part of heading 4202 as it is not specially shaped or internally fitted to contain particular tools with or without their accessories (see also the HSEN to heading 4202 , third paragraph, and ninth paragraph, point (f)). The article is therefore not covered by the wording of the first part of heading 4202 . The articles covered by the second part of heading 4202 must be only of the materials specified therein or must be wholly or mainly covered with such materials or with paper (see also the HSEN to heading 4202 , fourth paragraph). Taking into account that the article consists of moulded silicone elastomer, it cannot be considered as a handbag with an outer surface of sheeting of plastics. Therefore, the article is not covered by the wording of the second part of heading 4202 . The article is not of the kind normally carried in the pocket or in the handbag, such as spectacle cases, note-cases (bill-folds), wallets, purses, key-cases, cigarette-cases, cigar-cases, pipe-cases and tobacco-pouches (see also the Harmonised System subheading explanatory note to subheadings 4202.31, 4202.32 and 4202.39). Therefore, the article cannot be classified under subheadings 4202.31, 4202.32 and 4202.39. Consequently, the article is to be classified under CN code 3926 90 97 as other articles of plastics.

    Classified under 3926 90 97 at the time

  • 3926 90 60 Sep 9, 2020 · Regulation on EUR-Lex
    An article (so-called ‘connector enclosure’) in the shape of a rectangular hollow box, made of plastics, measuring approximately 60 × 190 × 170 mm.

    The article is designed to be used as an enslosure with electronic control modules in different kinds of vehicles or machines to physically protect electronic contacts against dirt and damp. See image (*1).

    Reasons

    Classification is determined by general rules 1 and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 3926, 3926 90 and 3926 90 97. Classification under heading 8536 as “electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits” is excluded, as the article in question is just an enclosure and does not comprise connectors, contacts or provisions thereof (see also the Harmonized System Explanatory Notes (HSEN) to heading 8536, part (III), (C)). The article is not considered to be a part of a machine within the meaning of Note 2(b) to Section XVI as its presence is not necessary for the connector, contact or provision thereof to function but only improves its functionality. Classification under heading 8538 as a part suitable for use solely or principally with the apparatus of heading 8536 is therefore excluded. The product is not considered to be an insulating fitting for electrical appliances of heading 8547 as it is not specifically designed for insulating purposes but for protecting the electrical connections (see also the HSEN to heading 8547, part (A)). Consequently, the article is to be classified according to its constituent material (plastics) under CN code 3926 90 97 as other articles of plastics.

    Classified under 3926 90 97 at the time

  • 3926 90 60 Jun 3, 2019 · Regulation on EUR-Lex
    An article (so-called ‘optical fibre box without connectors’) of cylindrical shape measuring approximately 140 mm in diameter and 400 mm in height. The weight of the article is approximately 2,5 kg. The article is made mainly of plastics with some small elements (brackets and screws) made of metal.

    The base of the article is provided with four cable entry points. When the article is fully assembled, the base is fixed to the cylindrical plastic covering of the article by a detachable round clasp. Inside, there is a splice tray made of plastics, attached to the base of the article. This tray contains specific grooves. At the time of presentation the article is not equipped with any connectors. The article as a whole is intended for the preservation of cables. (*1) See images

    Reasons

    Classification is determined by general rules 1 and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 3926 , 3926 90 and 3926 90 97 . Classification under subheading 8536 70 00 as ‘connectors for optical fibres, optical fibre bundles or cables’ or under subheading 8536 90 10 as ‘connections and contact elements for wire and cables’ (which are electrical apparatus for making connections) is excluded, as the article in question is just a box. It is neither equipped with connectors for optical fibres, optical-fibre bundles or optical cables nor does it possess any ‘connections and contact elements for wire and cables’. Classification under heading 8538 as ‘parts suitable for use solely or principally with the apparatus of heading 8535 , 8536 or 8537 ’ is also excluded as due to the absence of connectors, contacts or provisions therefor, the article can be considered neither electrical apparatus of heading 8536 nor an identifiable part thereof. Consequently, the article is to be classified according to its constituent material (plastics) under CN code 3926 90 97 as other articles of plastics.

    Classified under 3926 90 97 at the time

+ 17 more
  • 3926 90 60 May 15, 2019 · Regulation on EUR-Lex
    An article, of a rectangular shape with rounded edges, made of moulded plastics (polycarbonate), in the form of a shell which covers the back and the sides of a mobile phone, measuring approximately 7 × 14 × 0,8 cm.

    The outer surface of the back is covered with a leather layer and the inner surface, which makes contact with the back of the mobile phone, is lined with man-made fibres (microfibres). It is designed to hold and protect the back and sides of a mobile phone. The front of the mobile phone is not to be covered. See image (*1).

    Reasons

    Classification is determined by general rules (GIR) 1, 3(b) and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 3926 , 3926 90 and 3926 90 97 . According to its objective characteristics, the article is designed to hold and protect the back and sides of a mobile phone. The protection is given by the material of the shell (polycarbonate plastic). The leather layer on the outer surface of the back of the article enhances its appearance providing only an additional effect to the main purpose of protection. Consequently, the polycarbonate plastic forming the protective shell constitutes the material that gives the article its essential character within the meaning of GIR 3(b). Classification of the article under heading 4205 as other articles of leather is therefore excluded. Classification of the article under heading 6307 as other made-up articles is also excluded as the man-made fibres constitute merely the lining. Consequently, the article is to be classified under CN code 3926 90 97 as other articles of plastics.

    Classified under 3926 90 97 at the time

  • 3926 90 60 Oct 10, 2018 · Regulation on EUR-Lex
    A rectangular shaped article made of plastics, with dimensions of approximately 18 × 5 × 2 mm. The article is fitted with a plastic cord to attach it to a mobile phone and with a rubber seal.

    The article is designed to cover and protect USB sockets of a specific model of mobile phone. The article protects the mobile phone against water and dust.

    Reasons

    Classification is determined by general rules 1, 3(b) and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 3926 , 3926 90 and 3926 90 97 . The article is not a part of a mobile phone for the purposes of Note 2 to Section XVI as the mechanical or electrical functioning of the mobile phone is not dependent upon the article (see judgments of the Court of Justice of 15 May 2014, Data I/O, C-297/13, ECLI:EU:C:2014:331, paragraph 35, and of 20 November 2014, Rohm Semiconductor, C-666/13, ECLI:EU:C:2014:2388, paragraph 46). The article only serves as a protection of the mobile phone. Classification under heading 8517 as a part suitable for use solely or principally with telephones for cellular networks is therefore excluded. The article is to be classified according to the constituent material which gives the article its essential character. The plastic gives the article its essential character as its presence is predominant in quantity and because of its determinant role in relation to its use. Consequently, the article is to be classified under CN code 3926 90 97 as other articles of plastics.

    Classified under 3926 90 97 at the time

  • 3926 90 60 Oct 10, 2018 · Regulation on EUR-Lex
    Flat flexible article made from an air bubble type sheet of plastics, circular in shape, with a diameter of approximately 305 cm.

    The article is presented as a cover for a swimming pool or paddling pool to keep the water at an optimal temperature and to keep the pool clean. See images (*1).

    Reasons

    Classification is determined by general rules 1 and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 3926 , 3926 90 and 3926 90 92 . Classification of the article under heading 9506 as a part or an accessory of a swimming pool or a paddling pool is excluded, because the article is not identifiable as being suitable for use solely or principally with swimming pools or paddling pools within the meaning of note 3 to Chapter 95. Moreover, the article cannot be considered a part or an accessory to a swimming pool or a paddling pool of heading 9506 , because it is neither indispensable for the functioning of a swimming pool or a paddling pool, nor does it adapt those pools to a particular operation or increase their range of operations or enable them to perform a particular service connected with their main function which is swimming or paddling (see judgment of the Court of Justice of 16 June 2011, Unomedical, C-152/10, ECLI:EU:C:2011:402, paragraphs 29 and 36). The swimming pool or paddling pool cannot be used when covered. Classification as ‘plates, sheets, film, foil and strip’ under headings 3920 or 3921 is excluded by virtue of note 10 to Chapter 39, because the article is cut into a round shape, rather than being uncut or being cut into a rectangle. The article is therefore to be classified according to its constituent material under CN code 3926 90 92 as ‘other articles of plastics, made from sheet’.

    Classified under 3926 90 92 at the time

  • 3926 90 60 Apr 12, 2018 · Regulation on EUR-Lex
    An inflatable cushion of plastics (so-called ‘wheelchair cushion’), measuring approximately 40 × 40 cm, consisting of two rectangular interconnected chambers filled with air. Each chamber contains an air filled bag of plastics covered with a thin layer of silicone.

    The cushion is adjustable according to the degree to which the two chambers are inflated, which causes the position of the bag of plastics in each chamber to shift when the user is sitting on the cushion. The cushion has a removable anti-slip cover of textile materials that has two ‘velcro’-type straps attached to its underside. The article is intended to prevent the user developing pressure sores. It provides a relieving effect on the seat bones and improves the comfort of the user. See images (*1)

    Reasons

    Classification is determined by general rules 1, 3(b) and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 3926 , 3926 90 and 3926 90 97 . Classification of the article under heading 9404 (articles of bedding and similar furnishing) is excluded because pneumatic cushions are excluded from this heading within the meaning of note 1 (a) to Chapter 94 and, consequently, pneumatic cushions of plastics are classified under heading 3926 (see also the Harmonized System Explanatory Notes (HSEN) to heading 9404 , last paragraph, (b)). Classification under CN code 8714 20 00 as parts and accessories of carriages for disabled persons is also excluded, because the article is not identifiable as being suitable for use solely or principally with carriages for disabled persons within the meaning of note 3 to Section XVII. Considering its objective characteristics, the article can be used on many seats and chairs as well as on seats of wheelchairs. For example, the article is not designed for use with a specific seat, because it has no specific means by which it can be attached that would identify it for use with a specific seat. The anti-slip cover and the ‘velcro’-type straps can be attached to many different types of seats. There is therefore nothing to identify the article as being designed for use with a specific type of seat (see also the HSEN to heading 8714 , first paragraph, (i)). Moreover, classification under CN code 8714 20 00 as parts and accessories of carriages for disabled persons is excluded because the article is neither indispensable for the functioning of the wheelchair, nor does it adapt the wheelchair for a particular operation or increase its range of operations or enable it to perform a particular service connected with its main function which is enabling a handicapped person to move (see judgment of the Court of 16 June 2011, Unomedical, C-152/10, ECLI:EU:C:2011:402, paragraphs 29, 30 and 36). A wheelchair operates in the same way as it does without the cushion. The cushion merely makes the wheelchair more comfortable and endurable for the user. Although the article consists of different components (the cushion of plastics and the cover of textile materials), the article is to be classified as if it consisted of the cushion of plastics because the cushion gives the article its essential character within the meaning of general rule 3 (b). The textile component is merely a cover that protects and keeps the essential component in place. The article is therefore to be classified according to its constituent material under CN code 3926 90 97 as ‘other articles of plastics’.

    Classified under 3926 90 97 at the time

  • 3926 90 60 Jun 26, 2017 · Regulation on EUR-Lex
    An article (so-called ‘steering wheel cover’) made of plastics (polyvinyl chloride (PVC)), forming a circle with a diameter of 38 cm.

    The article is designed to cover the steering wheel of a motor vehicle in order to improve its appearance, to protect the steering wheel against the sweat, wear and tear caused by its use and to protect hands from hot and cold extremes. See image (*1).

    Reasons

    Classification is determined by general rules 1 and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 3926 , 3926 90 and 3926 90 97 . Classification under subheading 8708 94 as a part of a steering wheel is excluded as the article is not indispensable for the function of the steering wheel. Classification under subheading 8708 99 as other parts or accessories of motor vehicles of headings 8701 to 8705 is also excluded as the article is not indispensable for the function of the motor vehicle, nor does it adapt the motor vehicle for a particular operation, or increase its range of operations, or enable it to perform a particular service connected with its main function (see Case C-152/10, Unomedical, ECLI:EU:C:2011:402, paragraphs 29 and 36). Consequently, the article is to be classified according to its constituent material (plastics) under CN code 3926 90 97 as other articles of plastics.

    Classified under 3926 90 97 at the time

  • 3926 90 60 Jan 27, 2017 · Regulation on EUR-Lex
    Articles (so-called ‘thumb grips for a game console controller’) measuring approximately 20 mm in diameter and 6 mm in height made of elastic silicone (plastics) with an anti-slip surface. They are equipped with a self-adhesive aluminium profile, cut to the design of the support.

    These grips are used as caps on the joysticks of a game console controller. The thumb grip caps are intended to protect the game controller against the sweat, wear and tear caused by intensive use, as well as to prevent fingers from slipping off the controller, by means of their anti-slip surface. See image (*1)

    Reasons

    Classification is determined by general rules 1 and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 3926 , 3926 90 and 3926 90 97 . The ‘thumb grips’ merely enhance the function of the game controller. Thus, they are neither adapting the game controller for a particular operation, nor increasing its range of operations, nor performing a particular service relative to the main function of the game controller or of the game console (see case C-152/10 Unomedical ECLI:EU:C:2011:402, paragraphs 13, 29 and 38). Consequently, the classification as an accessory of video game consoles and machines of heading 9504 is excluded. The article is therefore to be classified according to its constituent material (plastics) under CN code 3926 90 97 as other articles of plastics.

    Classified under 3926 90 97 at the time

  • 3926 90 60 Dec 2, 2015 · Regulation on EUR-Lex
    An article (so-called ‘draught excluder’ or ‘door bottom seal’) consisting of an aluminium base with dimensions of approximately 100 × 3 cm and plastic bristles of a length of approximately 2 cm and with a cross–sectional dimension of more than 1 mm attached to the base. The base is covered with a self-adhesive film on one side.

    The base is to be affixed to the bottom of a door by the adhesive film. The bristles bridge the gap between the underside of the door and the floor, preventing the entry of a current of air, dirt, etc. (*1) See image.

    Reasons

    Classification is determined by general rules 1, 3 (b) and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 3926 , 3926 90 and 3926 90 97 . Given the objective characteristics of the article, it is intended to bridge the gap between the door and the floor preventing the entry of a current of air, dirt, etc. It is not intended to be used as a brush for cleaning. Classification under heading 9603 as brushes is therefore excluded. The article is composite goods made up of different components, namely the aluminium base, the plastic bristles and the adhesive film. The bristles give the article its essential character because of their role in relation to the use of the product. Classification under heading 7616 as other articles of aluminium is therefore also excluded. The article is therefore to be classified under CN code 3926 90 97 as other articles of plastics.

    Classified under 3926 90 97 at the time

  • 3926 90 60 Jul 10, 2014 · Regulation on EUR-Lex
    A circular product made of silicone with a diameter of approximately 10 to 15 mm and a height of approximately 3 mm. The product has a cross-shaped incision in the centre. It has no mechanical components.

    The product is used together with a screw-on cap with a lid. It is placed inside the screw-on cap and the whole is screwed over a bottle-neck. The product prevents a semi-liquid substance, for example, mayonnaise or ketchup, flowing out of a bottle when the latter is turned upside down. When the lid is open and the bottle is turned upside down, the substance is dispensed via the cross-shaped incision if manual pressure is applied to the bottle. See image (*1)

    Reasons

    Classification is determined by general rules 1 and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 3926 , 3926 90 and 3926 90 97 . As the product cannot perform the function of a stopper on its own, but only when placed inside the screw-on cap, it is considered an accessory to the cap. Therefore, classification under heading 3923 as stoppers, lids, caps and other closures is excluded. The product leads the semi-liquid substance into the screw-on cap, but does not itself control the opening and closing of the aperture, and therefore it does not regulate the flow of a liquid by opening and closing an aperture. Consequently, classification under heading 8481 as taps, cocks, valves and similar appliances is excluded. As the constituent material of the product is plastic, it is therefore to be classified under CN code 3926 90 97 as other articles of plastics.

    Classified under 3926 90 97 at the time

  • 3926 90 60 Jul 25, 2013 · Regulation on EUR-Lex
    A wheel with a diameter of approximately 20 cm and a width of approximately 5 cm, consisting of a plastic rim and a solid plastic tyre.

    The rim has a central hole and a ball bearing made of carbon steel. The wheel can be mounted on various articles such as carriages for disabled persons, walkers/rollators and hospital beds. (*1) see image

    Reasons

    Classification is determined by General Rules 1, 3(b) and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 3926 , 3926 90 and 3926 90 97 . The intended principal use of the wheel is not inherent to its objective characteristics, as it is equally suitable for goods of, for example, heading 8713 (carriages for disabled persons), heading 9021 (walkers/rollators) and heading 9402 (hospital beds). Classification as a part of a specific article is therefore excluded. The wheel is composite goods consisting of different materials (plastics and carbon steel). The component that gives the wheel its essential character is the rim made of plastics, as it contributes the most to the structure of the wheel. The article is therefore to be classified under CN code 3926 90 97 as other articles of plastics.

    Classified under 3926 90 97 at the time

  • 3926 90 60 Jun 7, 2013 · Regulation on EUR-Lex
    Half of a housing made of plastics, with various slots and fixings, specially moulded and shaped to clip on the other half, measuring approximately 7,5 × 5 cm.

    The article is designed to be used as a part of a cover of a locking mechanism of a safety seat belt buckle used, for example, in motor vehicles. (*1) See image.

    Reasons

    Classification is determined by General Rules 1 and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 3926 , 3926 90 and 3926 90 97 . Classification under heading 8708 is excluded, as that heading only covers safety seat belts of vehicles of headings 8701 to 8705 but not parts thereof. The article is therefore to be classified according to its constituent material under CN code 3926 90 97 as other articles of plastics.

    Classified under 3926 90 97 at the time

  • 3926 90 60 Aug 31, 2011 · Regulation on EUR-Lex
    Underwater housing for digital cameras made mainly of plastic within the meaning of Note 1 to Chapter 39.

    The product consists of two transparent halves which are fitted with manually operated push buttons, control or operating knobs made of metal, and frames with clasps made of plastic. It can also be fitted with an anti-glare screen shield, a mount and an extra handgrip. The watertight housing has a hollow at the front to fit the lens, which consists of a glass window and metal surround with an internal thread for ancillary lenses. At the back there is a padded space for the camera viewfinder. The product is intended to hold a complete digital camera and enables the camera to be used in damp or dusty surroundings. (See photos 1 and 2) (*1)

    Reasons

    Classification is determined by General Rules 1, 3 (b) and 6 for the interpretation of the Combined Nomenclature, Note 1 to Chapter 39 and the wording of CN codes 3926 , 3926 90 and 3926 90 97 . Classification under heading 4202 as a camera case is excluded. Camera cases are included in heading 4202 . However, the underwater housing is not just a container for holding digital cameras but a product with a function of its own. Given the presence of push buttons and control or operating knobs, the product is not to be considered a container. Classification under heading 8529 is excluded since, although the article is a camera accessory, it cannot be considered a digital camera part as it is not essential to the functioning of a digital camera. Classification under headings 9006 or 9007 pursuant to Note 2 (b) to Chapter 90 is also excluded as those headings cover traditional photographic and cinematographic cameras, not digital cameras. The product consists of different materials and has therefore to be classified according to the constituent material which gives the product its essential character, in application of General Rule 3 (b). As plastic gives the product its essential character, it is therefore to be classified under heading 3926 as other article of plastics of CN code 3926 90 97 .

    Classified under 3926 90 97 at the time

  • 3926 90 60 Jul 22, 2009 · Regulation on EUR-Lex
    A plastic figurine used as a dispenser with a height of 23 cm, having a round shaped corpus with arms and legs constituting a football player which is fixed on a pedestal.

    The product is destined to be filled with sweets. By moving one arm the sweets come out through a round opening in the corpus.

    Reasons

    Classification is determined by General Rules 1 and 6 on the interpretation of the Combined Nomenclature, Note 1 (v) to Chapter 95 and the wording of CN codes 3926 , 3926 90 and 3926 90 97 . The plastic dispenser of sweets does not have the character of a toy because it simply dispenses sweets and has no real play value of its own. The product does not have the character of kitchenware or other household articles of heading 3924 . This product, used to store sweets, has a utilitarian function within the meaning of Note 1 (v) to Chapter 95 and therefore it has to be classified according to its constituent material under CN code 3926 90 97 .

    Classified under 3926 90 97 at the time

  • 3926 90 60 Jul 8, 2009 · Regulation on EUR-Lex
    Fluoroelastomer O-ring seals (vinylidene fluoride and hexafluoropropylene copolymer).

    The constituent material of this product (vinylidene fluoride and hexafluoropropylene copolymer) displays the stretching and recovery properties of elastomers, but cannot be vulcanised with sulphur. In order to cross-link, it requires basic compounds or certain peroxides.

    Reasons

    Classification is determined by General Rules 1 and 6 for the interpretation of the Combined Nomenclature, Notes 1 and 4 to Chapter 39, Note 4(a) to Chapter 40, Note 2 to Section XVI, Note 2 to Chapter 90 and the wording of CN codes 3926 , 3926 90 and 3926 90 97 . This product is an elastomeric seal for general use. Therefore it is not a recognizable part of a machine in the meaning of Note 2 to Section XVI and Note 2 to Chapter 90 of the CN, and consequently excluded from Section XVI and Chapter 90. The constituent material of this product does not comply with the definition of synthetic rubbers contained in Note 4(a) to Chapter 40, since it cannot be vulcanised with sulphur. Poly (vinylidene fluoride) is a polymer belonging to Chapter 39 (see the Harmonised System Explanatory Notes (HS EN), General Notes to Chapter 39, list of abbreviations of polymers and Notes relating to heading 3904 , last paragraph). Vinylidene fluoride and hexafluoropropylene copolymer is a fluorinated copolymer which should be classified in Chapter 39. Consequently, the product in question is a plastic product belonging to Chapter 39 and not specified or included elsewhere in the combined nomenclature, and should therefore be classified under CN code 3926 90 97 .

    Classified under 3926 90 97 at the time

  • 3926 90 60 Jun 5, 2009 · Regulation on EUR-Lex
    An article made of plastics (a so-called ‘cable seal’) (*1) with overall dimensions of approximately 1 cm (diameter) × 0,8 cm (length).

    The article has a central hole and is fitted with ribs on the outer surface. It is designed for use with electrical connectors in motor vehicles to protect the electrical connection from dust, moisture, oil and other elements ordinarily found in the environment of a car.

    Reasons

    Classification is determined by General Rules 1 and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 3926 , 3926 90 and 3926 90 97 . The article is not considered to be a part of an electrical apparatus within the meaning of Note 2(b) to Section XVI as its presence is not necessary for the connector to function but only improves its functionality. Classification under heading 8538 as a part suitable for use solely or principally with the apparatus of heading 8536 is therefore excluded. The product is not considered to be an insulating fitting for electrical appliances of heading 8547 as it is not specifically designed for insulating purposes but for protecting the electrical connections. The article is therefore to be classified under CN code 3926 90 97 , as other articles of plastics.

    Classified under 3926 90 97 at the time

  • 3926 90 60 Nov 28, 2007 · Regulation on EUR-Lex
    Set for nail decorating consisting of:

    48 false nails a small tube of glue a nail file a manicure stick and decorating stickers for the nails. The false nails are moulded plastic and are present in a variety of sizes. The set is put up for retail sale.

    Reasons

    Classification is determined by General Rules 1, 3(b) and 6 for the interpretation of the Combined Nomenclature, and by the wording of CN codes 3926 , 3926 90 and 3926 90 97 . The articles, as presented, constitute a set in the sense of general interpretative rule 3(b). The set does not consist of manicure products of subheading 3304 30 00 as it includes the addition of false nails stuck over the fingernail and does not include manicure preparations which simply care for and beautify the hand and the natural nails (Harmonised System Explanatory Notes to heading 3304 , (B)). The set consists of different articles and is to be classified in subheading 3926 90 97 according to the plastic false nails, which give the set its essential character.

    Classified under 3926 90 97 at the time

  • 3926 90 60 Nov 28, 2007 · Regulation on EUR-Lex
    Moulded plastic false nails.

    They are designed to be bound to the natural nail using an acrylic bonding solution. They are packaged in quantities of 50, of the same size.

    Reasons

    Classification is determined by General Rules 1 and 6 for the interpretation of the Combined Nomenclature, and by the wording of CN codes 3926 , 3926 90 and 3926 90 97 . The products are not considered to constitute manicure products of subheading 3304 30 00 as they entail the addition of false nails stuck over the fingernail and do not consist of manicure preparations which simply care for and beautify the hand and the natural nails (Harmonised System Explanatory Notes to heading 3304 , (B)). They should therefore be classified as other articles of plastic in subheading 3926 90 97 according to their constituent material.

    Classified under 3926 90 97 at the time

  • 3926 90 60 Jun 8, 2007 · Regulation on EUR-Lex
    A replica of a specific mobile phone (a so-called ‘mock-up’).

    The product is made mainly of plastics. It has no electronic components. Its size, design and weight are identical to the characteristics of the specific model. It is equipped with buttons allowing the feeling of pushing real buttons.

    Reasons

    Classification is determined by General Rules 1 and 6 for the interpretation of the Combined Nomenclature and the wording of CN codes 3926 , 3926 90 and 3926 90 97 . Because of its construction and the fact that it does not possess the functions of a mobile phone, the product is excluded from heading 8517 . Although the product is a replica of a specific mobile phone by looking like one and being equipped with buttons providing the feel of a mobile phone, it does not demonstrate any other feature or property of the model in question. Its main task is to show what a specific mobile phone looks like. Therefore the product is excluded from heading 9023 . The product is to be classified according to the constituent material (plastics).

    Classified under 3926 90 97 at the time

UK advance tariff rulings for 3926906000

Rulings of HM Revenue & Customs for goods with UK commodity codes that start like this EU code. The UK tariff differs from the EU tariff, so these rulings are guidance for the EU.

  • UK 3926906000 Valid Feb 6, 2025 to Feb 5, 2028 · Ruling 600011640 on GOV.UK

    A safety face visor for use industrial environments. The face shield consists of a clear polycarbonate visor that covers the eyes and face, it is attached to a black polycarbonate/nylon headgear and harness. The harness within the headgear comprises of a terry-cloth headband, it is fully adjustable. It is packaged in a recyclable LDPE polybag.

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 3926: Other articles of plastics and articles of other materials of headings 3901 to 3914. GIR 3B - Has been used as the plastic constituent material of the visor is considered to be the essential character. GIR 5 (b) - Has been used to identify the type of packaging: Recyclable LDPE polybag. GIR 6 - Has been used to classify the goods to subheading level 392690: Other than elsewhere specified. 8 DIGIT CODE 39269060: Protective face shields/visors. Also classified in accordance with: General section Chapter 39 note 1 Harmonised System Explanatory …

  • UK 3926906000 Valid Jan 30, 2025 to Jan 29, 2028 · Ruling 600011641 on GOV.UK

    A replacement visor. A clear full-face visor made from polycarbonate. There are holes at the top, which enables it to be attached to the top of the headgear. It is intended to be used in industrial environments providing protected panoramic vision. It is packaged within a box with multiple numbers of visors.

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 3926: Other articles of plastics and articles of other materials of headings 3901 to 3914. GIR 5 (b) - Has been used to identify the type of packaging: A box. GIR 6 - Has been used to classify the goods to subheading level 392690: Other than elsewhere specified. 8 DIGIT CODE 39269060: Protective face shields/visors. Also classified in accordance with: General section Chapter 39 note 1 Harmonised System Explanatory Notes (HSEN) heading 3926

  • UK 3926906000 Valid Jan 30, 2025 to Jan 29, 2028 · Ruling 600011642 on GOV.UK

    A replacement visor. The clear full-face visor made from acetate. There are holes at the top and bottom, which enables it to be attached to the headgear (not included in this ruling). It is intended to be used in industrial environments providing protected panoramic vision. It is packaged within a box with multiple numbers of visors.

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 3926: Other articles of plastics and articles of other materials of headings 3901 to 3914. GIR 5 (b) - Has been used to identify the type of packaging: A box. GIR 6 - Has been used to classify the goods to subheading level 392690: Other than elsewhere specified. 8 DIGIT CODE 39269060: Protective face shields/visors. Also classified in accordance with: General section Chapter 39 note 1 Harmonised System Explanatory Notes (HSEN) heading 3926

Source: HM Revenue & Customs, Advance Tariff Rulings. Contains public sector information licensed under the Open Government Licence v3.0.

Restrictions and flags for 39269060

  • Russia sanctions: import ban Regulation (EU) No 833/2014, Annex XXI 3926

    Art. 3i, goods generating significant revenue for Russia

    Read the act on EUR-Lex
  • Russia sanctions: export ban Regulation (EU) No 833/2014, Annex XXIII 392690

    Art. 3k, goods contributing to Russian industrial capacity

    Read the act on EUR-Lex

For orientation only. Check the act before you rely on a flag; thresholds, derogations and exceptions are not shown in full.

EU trade in 2025 for 39269060

Extra-EU imports
€21.6M
783 t
Extra-EU exports
€17M

Top origin countries by import value

  1. China €5.5M
  2. Taiwan €4.4M
  3. United States €3.7M
  4. Mexico €3.1M
  5. Switzerland €1.1M

Figures for CN8 code 39269060. Source: Eurostat, Comext, CC BY 4.0, processed by hscode.info. Confidential trade is not allocated to codes.

HS 2028 change

This subheading changes on 1 January 2028.

HS 2022 subheading 392690 is split. New HS 2028 subheadings: 392651, 392659, 392661, 392662, 392690.

From the WCO HS 2022 to HS 2028 correlation tables, a guide only. The EU sets its own CN codes for 2028.

Tariff changes for 39269060 since 2016

  • Jan 2021 3926906000 Code added

Month-by-month comparison of the European Commission’s TARIC extractions. Seasonal entry prices left out.

UK import duty for 392690

  • 0%
  • 6%

Third-country duties of all UK commodity codes under this HS subheading. Source: UK Department for Business and Trade, as of Nov 2, 2026. The UK tariff differs from the EU tariff.

Import VAT in the EU

  • Austria 20 %
  • Belgium 21 %
  • Bulgaria 20 %
  • Croatia 25 %
  • Cyprus 19 %
  • Czechia 21 %
  • Denmark 25 %
  • Estonia 24 % maybe 9 %
  • Finland 25.5 %
  • France 20 %
  • Germany 19 %
  • Greece 24 % maybe 6 %, 13 %
  • Hungary 27 % maybe 5 %
  • Ireland 23 %
  • Italy 22 % maybe 5 %
  • Latvia 21 %
  • Lithuania 21 %
  • Luxembourg 17 %
  • Malta 18 % maybe 5 %
  • Netherlands 21 %
  • Poland 23 %
  • Portugal 23 %
  • Romania 21 %
  • Slovakia 23 %
  • Slovenia 22 %
  • Spain 21 %
  • Sweden 25 %

Standard rate per member state, on the customs value, the duty and transport to the destination. Reduced rates often depend on the use or the buyer and apply only where the country provides them for these goods. Source: European Commission, Taxes in Europe Database, as of Nov 2, 2026.

Rules of origin

Preferential rules of origin for subheading 392690 depend on the trade agreement. The Commission publishes them in Access2Markets.

Rules of origin on Access2Markets

Information

When importing or exporting "Protective face shields/visors", it is crucial to have the correct HS code or TARIC code. The HS code 3926906000 80 serves as the standard code for this product, ensuring that the appropriate duties and taxes are applied when crossing international borders.

To ensure your business transactions run smoothly when importing or exporting "Protective face shields/visors", consider the following points:

  1. Inform yourself about the specific import and export regulations in the countries involved. This includes possible restrictions, taxes, and duties applicable to "Protective face shields/visors".
  2. Check if any additional licenses, permits, or certificates are required to import "Protective face shields/visors" into the destination country or export it from the country of origin.
  3. Make sure your trading partners have valid identification numbers, such as EORI numbers (Economic Operators Registration and Identification) in the EU, to streamline trade and minimize delays.
  4. Ensure that all trade- and customs-related documents (such as commercial invoices, packing lists, certificates of origin, and insurance policies) are accurately completed and adhere to the respective national regulations.
  5. Keep an eye on the current exchange rates, as well as packaging, shipping, and insurance costs, to accurately calculate trade costs.

In summary, the HS code or TARIC code for "Protective face shields/visors" is 3926906000 80. Make sure you accurately use this code in all your trade and customs documents to guarantee smooth and hassle-free transactions. With these tips, you'll be better prepared for the challenges of international trade and can successfully import and export "Protective face shields/visors".

HS Code structure

39
Chapter
26
Heading
90
Subheading
60
CN Subheading
00
TARIC Subheading
80
Additional TARIC codes

1. Chapter

There are 21 different sections, which are divided into 96 chapters. Exceptional chapters include chapter 77, which is reserved for future use, chapters 98 and 99, which are limited at national level, and chapter 99, which is a specific code for temporary changes. In the example above, chapter 39 was selected for plastics and articles thereof

2. Heading

The heading determines the specific category within a certain chapter. In the example above, the 26 refers to Other articles of plastics and articles of other materials of headings 3901 to 3914.

3. Subheading

The last two digits of the international harmonized code are more specific and define subcategories of products. In the example above, the 90 refers to Protective face shields/visors.

HS Code tree structure

3900000000 80

Chapter PLASTICS AND ARTICLES THEREOF

3926000000 80

Other articles of plastics and articles of other materials of headings 3901 to 3914

3926100000 80

- Office or school supplies

3926200000 80

- Articles of apparel and clothing accessories (including gloves, mittens and mitts)

3926300000 80

- Fittings for furniture, coachwork or the like

3926300040 80

- - Plastic internal door handle used in the manufacture of motor vehicles

3926300050 80

- - Coated interior or exterior decorative parts consisting of: -a copolymer of acrylonitrile-butadiene-styrene (ABS), whether or not mixed with polycarbonate, and -a PVC foil, -not containing layers of copper, nickel or chromium, for use in the manufacturing of parts for motor vehicles of heading 8701 to 8705

3926300090 80

- - Other

3926400000 80

- Statuettes and other ornamental articles

3926900000 80

- Other

3926905000 80

- - Perforated buckets and similar articles used to filter water at the entrance to drains

3926906000 80

- - Protective face shields/visors

3926909700 80

- - Other

3926909705 80

- - - For technical uses, for use in civil aircraft

3926909710 80

- - - Microspheres of a polymer of divinylbenzene, of a diameter of 4,5 µm or more but not more than 80 µm

3926909722 80

- - - Gaskets for road vehicles mirrors and their components, made of polyethylene foam, produced by a thermoforming process and with: -a density of 20 kg/m³ or more, but not more than 40 kg/m³, -a tensile strength of not less than 170 kPa, -water absorption coefficient of not greater than 1 %, -a length of 5 mm or more but not more than 300 mm, -a height of 10 mm or more but not more than 400 mm, -a depth of 5 mm or more but not more than 250 mm

3926909723 80

- - - Plastic cover with clips for the exterior rear-view mirror of motor vehicles

3926909727 80

- - - Gasket of polyethylene foam, intended to fill-up the space between the body of a motor vehicle and the base of a rear-view mirror

3926909730 80

- - - Parts of car radio and car air-conditioner front panels - of acrylonitrile-butadiene-styrene with or without polycarbonate, - coated with a copper, a nickel and a chrome layers, - with a total thickness of coating of 5,54 μm or more but not more than 49,6 μm

3926909733 80

- - - Housings, housing parts, drums, setting wheels, frames, covers, upper part, design plate and other parts of acrylonitrile-butadiene-styrene, polycarbonate, polymethylmethacrylate or thermoplastic polyurethane, of a kind used for the manufacture of remote controls

3926909740 80

- - - Silicone shell for breast implant 

3926909743 80

- - - Mixture of water and by weight 19 % or more but not more than 35 % of expanded hollow microspheres of a copolymer of acrylonitrile, methacrylonitrile and isobornyl methacrylate or other methacrylate, of a diameter of 3 µm or more but not more than 4,95 μm

3926909748 80

- - - Coated interior or exterior decorative parts consisting of: -a copolymer of acrylonitrile-butadiene-styrene (ABS), whether or not mixed with polycarbonate, and -a PVC foil, -not containing layers of copper, nickel or chromium, for use in the manufacturing of parts for motor vehicles of heading 8701 to 8705

3926909758 80

- - - Plastic ferrules and/or plugs: -supported with or without a stainless steel ring, -suitable for a maximum working pressure rate of 2,7 MPa or more but not more than 114 MPa, for tubings with: -outer diameter of 0,33 mm or more but not more than 3,3 mm, -suitable for a maximum working pressure rate of 2,7 MPa or more but not more than 114 MPa, -suitable for all solutions used in chromatography, for use in the production of chromatographic systems

3926909760 80

- - - Sheath contraceptives of polyurethane

3926909777 80

- - - Silicone decoupling ring with an inner diameter of 13,2 mm or more but no more than 17,2 mm, in immediate packings of 2 500 pieces or more, of a kind used in car parking aid sensor systems

3926909790 80

- - - Other