Import trade restrictions for 8302000000 80
Duties for more codes with a free account
You have looked at the duties of 10 codes today. Sign up free to see duties, measures and history for every code.
Preferential rules of origin for 8302000000
What the goods must meet to count as originating in a partner country and get the preferential duty, per agreement.
Autonomous Trade Preferences (Western Balkans) · Kosovo
EU-Chile Association Agreement · Chile
EU-Algeria Association Agreement · Algeria
EEA/EFTA agreements (Switzerland, Norway, Liechtenstein, Faroe Islands) · Faroe Islands, Liechtenstein, Norway, Switzerland
EU-Egypt Association Agreement · Egypt
EU-Georgia DCFTA · Georgia
Generalised Scheme of Preferences (GSP, GSP+, EBA) · Armenia, India, Kenya, Pakistan, Samoa, Solomon Islands, Syria, Vietnam
EU-Iceland FTA · Iceland
EU-Jordan Association Agreement · Jordan
EU-Jordan Association Agreement (relaxed rules, 2016) · Jordan
EU-Central America Association Agreement
EU-Lebanon Association Agreement · Lebanon
EU-Morocco Association Agreement · Morocco
EU-Moldova DCFTA · Moldova
Pan-Euro-Mediterranean (PEM) Convention · Albania, Andorra, Bosnia & Herzegovina, Egypt, Faroe Islands, Iceland, Kosovo, Liechtenstein, Montenegro, North Macedonia, Norway, Palestine, Switzerland, Türkiye
EU-Singapore FTA · Singapore
EU-Tunisia Association Agreement · Tunisia
EU-Ukraine DCFTA · Ukraine
Other mountings, fittings and similar articles suitable for buildings, and automatic door closers / or: Manufacture from materials of any heading, except that of the product. However, other materials of heading 8302 may be used, provided that their total value does not exceed 20 % of the ex-works price of the product
EPA CARIFORUM
EPA Pacific · Fiji, Papua New Guinea, Samoa, Solomon Islands
EU-Mexico Global Agreement · Mexico
Other mountings, fittings and similar articles suitable for buildings, and automatic door closers / or: Manufacture in which all the materials used are classified within a heading other than that of the product. However, the other materials of heading No 8302 may be used provided their value does not exceed 20 % of the ex-works price of the product
EU-Colombia/Peru/Ecuador Trade Agreement · Colombia, Ecuador, Peru
Other mountings, fittings and similar articles suitable for buildings, and automatic door closers / or: Manufacture from materials of any heading, except that of the product. However, other materials of heading 8302 may be used, provided that their total value does not exceed 20 per cent of the ex-works price of the product
other mountings, fittings and similar articles suitable for motor vehicles / or: Manufacture from materials of any heading, except that of the product / or: Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product
hinges and parts thereof designed for motor vehicles / or: Manufacture from materials of any heading, except that of the product / or: Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product
EPA Eastern and Southern Africa
Statuettes and other ornaments, of base metal / or: Manufacture in which all the materials used are classified within a heading other than that of the product. However, the other materials of heading No 8306 may be used provided their value does not exceed 30 % of the ex-works price of the product
EU Market Access Regulation (EPA) · Cameroon, Côte d’Ivoire, Ghana, Kenya
Other mountings, fittings and similar articles suitable for buildings, and automatic door closers / or: Manufacture in which all the materials used is classified within a heading other than that of the product. However, the other materials of heading No 8302 may be used provided their value does not exceed 20 % of the ex-works price of the product
EU-Japan EPA · Japan
CTH; MaxNOM 50 % (EXW); or RVC 55 % (FOB).
EU-Korea FTA · South Korea
Miscellaneous articles of base metal; except for: / or: Manufacture from materials of any heading, except that of the product
EU-Palestine Interim Association Agreement · Palestine
Other mountings, fittings and similar articles suitable for buildings, and automatic door closers / or: Manufacture in which all the materials used are classified within a heading other than that of the product. However, the other materials of heading No 8302 may be used provided their value does not exceed 20% of the ex-works price of the product
EPA SADC · South Africa
Other mountings, fittings and similar articles suitable for buildings, and automatic door closers / or: Manufacture in which all the materials used are classified within a heading other than that of the product. However, the other materials of heading No 8302 may be used provided their value does not exceed 20 % of the ex–works price of the product
EU-Viet Nam FTA · Vietnam
Miscellaneous articles of base metal. / or: Manufacture from materials of any heading, except that of the product; or manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product.
Source: European Commission, Access2Markets (CC BY 4.0, shortened). The text of the agreement prevails. Access2Markets
Legal and explanatory notes for 8302000000
8302 20 00 CN Explanatory Notes: Castors
For the purposes of this subheading, ‘castors’ are wheels with mountings of base metal. The mountings serve to fix the wheel to the product concerned, without further processing and without the addition of other components. Parts of base metal which are parts of the wheel itself (for example, the rim or the ball bearing) are not considered ‘mountings of base metal’ of heading 8302. The castors of this subheading may swivel or be fixed. They typically have the following appearance: Castors which do not have mountings of base metal or which do not satisfy the conditions of note 2 to Chapter 83 may be classified as parts or accessories or according to their constituent material.
Notes to chapter 83
Notes 1. For the purposes of this chapter, parts of base metal are to be classified with their parent articles. However, articles of iron or steel of heading 7312, 7315, 7317, 7318 or 7320, or similar articles of other base metal (Chapters 74 to 76 and 78 to 81) are not to be taken as parts of articles of this chapter. 2. For the purposes of heading 8302, the word ‘castors’ means those having a diameter (including, where appropriate, tyres) not exceeding 75 mm, or those having a diameter (including, where appropriate, tyres) exceeding 75 mm provided that the width of the wheel or tyre fitted thereto is less than 30 mm.
Notes to section XV
BASE METALS AND ARTICLES OF BASE METAL Notes 1. This section does not cover: (a) prepared paints, inks or other products with a basis of metallic flakes or powder (headings 3207 to 3210, 3212, 3213 or 3215); (b) ferro-cerium or other pyrophoric alloys (heading 3606); (c) headgear or parts thereof of heading 6506 or 6507; (d) umbrella frames or other articles of heading 6603; (e) goods of Chapter 71 (for example, precious-metal alloys, base metal clad with precious metal, imitation jewellery); (f) articles of Section XVI (machinery, mechanical appliances and electrical goods); (g) assembled railway or tramway track (heading 8608) or other articles of Section XVII (vehicles, ships and boats, aircraft); (h) instruments or apparatus of Section XVIII, including clock or watch springs; (ij) lead shot prepared for ammunition (heading 9306) or other articles of Section XIX (arms and ammunition); (k) articles of Chapter 94 (for example, furniture, mattress supports, luminaires and lighting fittings, illuminated signs, prefabricated buildings); (l) articles of Chapter 95 (for example, toys, games, sports requisites); (m) hand sieves, buttons, pens, pencil-holders, pen nibs, monopods, bipods, tripods and similar articles or other articles of Chapter 96 (miscellaneous manufactured articles); or (n) articles of Chapter 97 (for example, works of art). 2. Throughout the nomenclature, the expression ‘parts of general use’ means: (a) articles of heading 7307, 7312, 7315, 7317 or 7318 and similar articles of other base metal, other than articles specially designed for use exclusively in implants in medical, surgical, dental or veterinary sciences (heading 9021); (b) springs and leaves for springs, of base metal, other than clock or watch springs (heading 9114); and (c) articles of headings 8301, 8302, 8308, 8310 and frames and mirrors, of base metal, of heading 8306. In Chapters 73 to 76 and 78 to 82 (but not in heading 7315), references to parts of goods do not include references to parts of general use as defined above. Subject to the preceding paragraph and to note 1 to Chapter 83, the articles of Chapter 82 or 83 are excluded from Chapters 72 to 76 and 78 to 81. 3. Throughout the nomenclature, the expression ‘base metals’ means: iron and steel, copper, nickel, aluminium, lead, zinc, tin, tungsten (wolfram), molybdenum, tantalum, magnesium, cobalt, bismuth, cadmium, titanium, zirconium, antimony, manganese, beryllium, chromium, germanium, vanadium, gallium, hafnium, indium, niobium (columbium), rhenium and thallium. 4. Throughout the nomenclature, the term ‘cermets’ means products containing a microscopic heterogeneous combination of a metallic component and a ceramic component. The term ‘cermets’ includes sintered metal carbides (metal carbides sintered with a metal). 5. Classification of alloys (other than ferro-alloys and master alloys as defined in Chapters 72 and 74): (a) An alloy of base metals is to be classified as an alloy of the metal which predominates by weight over each of the other metals. (b) An alloy composed of base metals of this section and of elements not falling within this section is to be treated as an alloy of base metals of this section if the total weight of such metals equals or exceeds the total weight of the other elements present. (c) In this section, the term ‘alloys’ includes sintered mixtures of metal powders, heterogeneous intimate mixtures obtained by melting (other than cermets) and intermetallic compounds. 6. Unless the context otherwise requires, any reference in the nomenclature to a base metal includes a reference to alloys which, by virtue of note 5 above, are to be classified as alloys of that metal. 7. Classification of composite articles: Except where the headings otherwise require, articles of base metal (including articles of mixed materials treated as articles of base metal under the general interpretative rules) containing two or more base metals are to be treated as articles of the base metal predominating by weight over each of the other metals. For this purpose: (a) Iron and steel, or different kinds of iron or steel, are regarded as one and the same metal. (b) An alloy is regarded as being entirely composed of that metal as an alloy of which, by virtue of note 5, it is classified. (c) A cermet of heading 8113 is regarded as a single base metal. 8. In this section, the following expressions have the meanings hereby assigned to them: (a) Waste and scrap (1) all metal waste and scrap; (2) metal goods definitely not usable as such because of breakage, cutting-up, wear or other reasons. (b) Powders Products of which 90 % or more by weight passes through a sieve having a mesh aperture of 1 mm. 9. For the purposes of Chapters 74 to 76 and 78 to 81, the following expressions have the meanings hereby assigned to them: (a) Bars and rods Rolled, extruded, drawn or forged products, not in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including ‘flattened circles’ and ‘modified rectangles’, of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross-section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including ‘modified rectangular’) cross-section exceeds one-tenth of the width. The expression also covers cast or sintered products, of the same forms and dimensions, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings. Wire-bars and billets of Chapter 74 with their ends tapered or otherwise worked simply to facilitate their entry into machines for converting them into, for example, drawing stock (wire-rod) or tubes, are however to be taken to be unwrought copper of heading 7403. This provision applies mutatis mutandis to the products of Chapter 81. (b) Profiles Rolled, extruded, drawn, forged or formed products, coiled or not, of a uniform cross-section along their whole length, which do not conform to any of the definitions of bars, rods, wire, plates, sheets, strip, foil, tubes or pipes. The expression also covers cast or sintered products, of the same forms, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings. (c) Wire Rolled, extruded or drawn products, in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including ‘flattened circles’ and ‘modified rectangles’, of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross-section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including ‘modified rectangular’) cross-section exceeds one-tenth of the width. (d) Plates, sheets, strip and foil Flat-surfaced products (other than the unwrought products), coiled or not, of solid rectangular (other than square) cross-section with or without rounded corners (including ‘modified rectangles’ of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel) of a uniform thickness, which are: - of rectangular (including square) shape with a thickness not exceeding one-tenth of the width - of a shape other than rectangular or square, of any size, provided that they do not assume the character of articles or products of other headings. Headings for plates, sheets, strip, and foil apply, inter alia, to plates, sheets, strip, and foil with patterns (for example, grooves, ribs, chequers, tears, buttons, lozenges) and to such products which have been perforated, corrugated, polished or coated, provided that they do not thereby assume the character of articles or products of other headings. (e) Tubes and pipes Hollow products, coiled or not, which have a uniform cross-section with only one enclosed void along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons, and which have a uniform wall thickness. Products with a rectangular (including square), equilateral triangular or regular convex polygonal cross-section, which may have corners rounded along their whole length, are also to be considered as tubes and pipes provided the inner and outer cross-sections are concentric and have the same form and orientation. Tubes and pipes of the foregoing cross-sections may be polished, coated, bent, threaded, drilled, waisted, expanded, cone-shaped or fitted with flanges, collars or rings.
Other explanatory notes for the chapter
Note 4 Unless otherwise indicated, transmission can also be made by means of devices (whether or not built into the individual components) which use infra-red rays, radio waves or laser beams etc. over short distances.
Additional note 1 A. Tools for the assembly or maintenance of machines To be classified with the appropriate machines, assembly or maintenance tools must satisfy the following three conditions concerning their nature, intended use and presentation: 1. they must be tools, i.e., hand tools of heading 4417 00 00 or 8205 or, for example, tools falling in subheading 8203 20 00, 8203 30 00, 8203 40 00, 8204 11 00, 8204 12 00, 9603 29 80, 9603 30 90, 9603 40 10, 9603 40 90, 9603 90 91 or 9603 90 99. Measuring and checking instruments of Chapter 90 are excluded in all cases; 2. they must be intended for the assembly or maintenance of the appropriate machine. Where the tools are identical, only those which must be used simultaneously are to be classified with their machines. Where they are different, only one of each kind of tool is allowed; 3. they must be presented for customs clearance at the same time as the appropriate machines. B. Interchangeable tools To be classified with the appropriate machines, interchangeable tools must fulfil three conditions: 1. they must be tools, i.e., tools falling in heading 8207 or, for example, tools falling in headings 4016, 5911 and 6909 or in subheading 4205 00 11, 4205 00 19, 6804 10 00, 6804 21 00, 6804 22 12, 6804 22 18, 6804 22 30, 6804 22 50, 6804 22 90, 6804 23 00 or 9603 50 00. Moulds (heading 8480) and accessories, including accessory apparatus (of, for example, heading 8466), are not considered as tools and consequently do not qualify under this additional note; 2. they must form part of the normal equipment of the appropriate machines. The following are considered part of the normal equipment of a machine: (a) any number of identical tools which can be accommodated on the machine simultaneously; (b) one of each kind of tool if the tools are different; 3. they must normally be sold with the appropriate machine and be presented for customs clearance with it.
Additional note 3 A machine in a disassembled or unassembled state may be imported in several consignments over a period of time, if this is necessary for convenience of trade or transport. In order to be able to declare the different constituent parts under the same tariff heading or subheading as the assembled machine, the declarant must make a request in writing to the customs post not later than the first consignment and attach: (a) a diagram or, if necessary several diagrams, of the machine showing the serial numbers of the most important constituent parts; (b) a general inventory containing an indication of the characteristics and approximate weights of the different parts and the serial numbers of the principal parts referred to above. The application may be accepted only in fulfilment of a contract for the supply or a machine which can be regarded as complete for the purposes of the Combined Nomenclature. All the constituent parts must be imported through the same entry point within the allowed time. However, in special cases, the competent authorities may authorise importation through several points of entry. This time limit may not be exceeded unless a reasoned and justified request for an extension is made to the competent authorities. Upon each partial importation, a list of the parts making up the consignment with references to the aforementioned general inventory must be provided. The customs declaration for each consignment must contain descriptions of both the part or parts making up the consignment and the complete machine.
Sources: Combined Nomenclature 2026, Annex I to Regulation (EEC) No 2658/87 (CELEX 32025R1926), and the Explanatory Notes to the Combined Nomenclature (CELEX 02019XC0329(02)-20260213). The section and chapter notes are legally binding; the explanatory notes are guidance. EUR-Lex
EU classification regulations for 8302000000
Commission regulations that classified specific goods under this code. They bind customs in every member state for identical goods.
- 8302 41 90 Aug 11, 2017 · Regulation on EUR-Lex
A rod of aluminium (so-called ‘shower curtain rod’) which is used for hanging a curtain. It consists of two hollow aluminium tubes. The smaller tube fits into the broader tube. The rod is extendable and contains a spring mechanism of steel inside the broader tube that is designed to press the two tubes towards a wall.
The article is presented without a curtain or curtain-rings. See image (*1)
Reasons
Classification is determined by general rules 1 and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 8302 , 8302 41 and 8302 41 90 . Classification under subheading 7615 20 as ‘sanitary ware’ is excluded because the article does not have objective characteristics of an article designed for a bathroom. It is suitable for use anywhere in the building, for example, to hang a curtain in front of a window or door. Due to its objective characteristics (the spring mechanisms together with the extensibility; the construction that can only sustain light weights e.g. of a curtain) the article is designed as a curtain rod and not a plain aluminium rod of heading 7604 . Curtain rods are classified in heading 8302 (see also the Harmonised System Explanatory Notes to heading 8302 , second paragraph, (D), (5)). Classification under CN code 8302 41 10 as ‘base-metal fittings for doors’ or under CN code 8302 41 50 as ‘base-metal fittings for windows and French windows’ is excluded because the article does not have objective characteristics that indicate that it is designed for use with one or the other. Consequently, the article is to be classified under CN code 8302 41 90 as ‘other base-metal mountings, fittings and similar articles suitable for buildings’.
- 8302 42 00 Apr 15, 2019 · Regulation on EUR-Lex
An article consisting of a rectangular plate made of steel with a length of 48,26 cm (19 inches) and rectangular shaped brackets of plastics.
The brackets are attached perpendicularly to the plate, and have an opening in their short sides opposite to the plate. The article has perforations at both ends of the plate to enable it to be fixed by screwing to steel cabinets of a length matching that of the article (19 inch cabinets), which can be used in telecommunication, data processing systems, etc. The article is designed to be used to organise cables in the cabinets. See image (*1)
Reasons
Classification is determined by general rules 1, 3(b) and 6 for the interpretation of the Combined Nomenclature, notes 2(c) and 3 to Section XV, note 1(d) to Chapter 94 and by the wording of CN codes 8302 and 8302 42 00 . The steel plate gives the article its essential character because it is the plate which is fixed to the cabinets and supports and holds the brackets in place. Heading 8302 covers general purpose classes of base metal accessory fittings and mountings, such as are used largely on furniture, doors, windows, coachwork etc. even if they are designed for particular uses (see also the Harmonized System Explanatory Notes to heading 8302 , first paragraph). Steel cabinets are classified as furniture within the meaning of note 2 to Chapter 94 (see also the HS classification opinions 940320/3 and 940320/4). The article has the objective characteristics of a fitting of base metal suitable for furniture classified under heading 8302 . In accordance with note 2(c) to Section XV, articles of heading 8302 are parts of general use. Classification as parts of furniture under heading 9403 is therefore excluded by virtue of note 1(d) to Chapter 94. Consequently, the article is to be classified under CN code 8302 42 00 as other base-metal mountings, fittings and similar articles suitable for furniture.
UK advance tariff rulings for 8302000000
Rulings of HM Revenue & Customs for goods with UK commodity codes that start like this EU code. The UK tariff differs from the EU tariff, so these rulings are guidance for the EU.
- UK 8302100090 Valid Jun 17, 2024 to Jun 16, 2027 · Ruling 600010579 on GOV.UK
A hinge to be used in a Chest Freezer. Made of Galvanised Steel. Dimensions 150mm (H) 45mm (W) 35mm (D) Weight 650g
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) GIR 1 has been used to classify this product by the terms of heading 8302 - Base-metal mountings, fittings and similar articles suitable for furniture, doors, staircases, windows, blinds, coachwork, saddlery, trunks, chests, caskets or the like; base-metal hat-racks, hat-pegs, brackets and similar fixtures; castors with mountings of base metal; automatic door closers of base metal GIR 6 - has been used to classify the goods to subheading level 830210 - Hinges 10 Digit Code 8302100090 - Other than elsewhere specified within this heading Also classified in accordance with : Harmonised System Explanatory Notes (HSENs) Note (A) to heading 8302
- UK 8302100090 Valid Jun 17, 2024 to Jun 16, 2027 · Ruling 600010602 on GOV.UK
A Replacement left upper door hinge for Buffalo 6 burner gas oven range. Dimensions 33mm (H) 37mm (W) 22mm (D) Weight 26g Colour Silver
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) GIR 1 has been used to classify this product by the terms of heading 8302 - Base-metal mountings, fittings and similar articles suitable for furniture, doors, staircases, windows, blinds, coachwork, saddlery, trunks, chests, caskets or the like; base-metal hat-racks, hat-pegs, brackets and similar fixtures; castors with mountings of base metal; automatic door closers of base metal GIR 6 - has been used to classify the goods to subheading level 830210 - Hinges 10 Digit Code 8302100090 - Other than elsewhere specified within this heading Also classified in accordance with : Harmonised System Explanatory Notes (HSENs) Note (A) to heading 8302
- UK 8302300090 Valid Oct 16, 2026 to Oct 15, 2029 · Ruling 600016245 on GOV.UK
The product is a metal illuminated tread plate. The plate is made from stainless steel with plastic casing to contain the LED lighting. The plate has specific text engraved on it. It is a long metal plate which is attached to the side of the door of a vehicle and lights up when opening the door. It is used for passengers to step on to facilitate entering or exiting the vehicle. The plate is packaged in corrugated cardboard.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 8302: Base-metal mountings, fittings and similar articles suitable for furniture, doors, staircases, windows, blinds, coachwork, saddlery, trunks, chests, caskets or the like; base-metal hat-racks, hat-pegs, brackets and similar fixtures; castors with mountings of base metal; automatic door closers of base metal GIR 2a - Has been used as the goods are unassembled. GIR 5 (b) - Has been used to identify the type of packaging: packaged in corrugated cardboard. GIR 6 - Has been used to classify the goods to subheading 830230: Other mountings, fittings …
+ 17 more
- UK 8302419000 Valid May 2, 2025 to May 1, 2028 · Ruling 600012884 on GOV.UK
Erail is a tracking system for curtains and scenery. The track is an aluminium extrusion and utilises steel components fitted with ball raced capstans and pulleys and features ball raced carriers. 12-wheel master runner is used on straight and curved tracks, taking curves as tight as a 500 mm radius and curtains as tall as 8 m. Each joint set comprises two flat plates with four countersunk socket screws that fit into and over the tee slot and one roll pin. External dimensions are 25 mm wide x 37 mm high. The extrusion is comprised of an I beam lower section with tee slot above. The tee slot accepts an M8 channel nut to suspend the track from the various mounting brackets, hook clamps and studding options. The track system is packaged with cardboard boxes, paper void fill, cardboard edging for the track and black wrap.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 8302- Base-metal mountings, fittings and similar articles suitable for furniture, doors, staircases, windows, blinds, coachwork, saddlery, trunks, chests, caskets or the like; base-metal hat-racks, hat-pegs, brackets and similar fixtures; castors with mountings of base metal; automatic door closers of base metal GIR 5 (b) has been used to identify the type of packaging. GIR 6 has been used to classify the goods to subheading level 830241-Other mountings, fittings and similar articles; Suitable for buildings 8 Digit Code 83024190 - Other. Also …
- UK 8302419000 Valid Jun 18, 2025 to Jun 17, 2028 · Ruling 600013237 on GOV.UK
UNIBEAM is a tracking system for curtains/drapes and scenery in theatres and film studios worldwide however it can be used anywhere curtains are required, such as a domestic property. The track is an aluminium extrusion and utilises steel components fitted with ball raced capstans and pulleys and features ball raced carriers. All components are the design of Triple E Ltd and are wholly owned. It is available in 2m (6'6") - 6.1 m (20') lengths. Steel plates and grub screws are used to join and align track sections. It can be either straight or curved. The track can be operated either by someone walking the item along the track, manually rope operated or motorised. This is the heaviest-duty track in the Triple E range, ideal for large scenic items, arena drapes, camera tracks, etc. The track system is packaged with cardboard boxes, paper void fill, cardboard edging for the track and black wrap. Should the system be sent internationally, it will be sent in a wooden crate or on a pallet.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 8302- Base-metal mountings, fittings and similar articles suitable for furniture, doors, staircases, windows, blinds, coachwork, saddlery, trunks, chests, caskets or the like; base-metal hat-racks, hat-pegs, brackets and similar fixtures; castors with mountings of base metal; automatic door closers of base metal GIR 5 (b) has been used to identify the type of packaging. GIR 6 has been used to classify the goods to subheading level 830241-Other mountings, fittings and similar articles; Suitable for buildings 8 Digit Code 83024190 - Other. Also …
- UK 8302419000 Valid Jun 18, 2025 to Jun 17, 2028 · Ruling 600013238 on GOV.UK
UNITRACK is a tracking system for curtains/drapes and scenery in theatres and film studios, used for touring shows as well as domestic property. The track is an I-beam style, welded steel construction and utilises steel components fitted with ball raced capstans and pulleys, and features ball raced carriers can be either straight or curved. The track can be operated either by someone walking the item along the track, manually rope operated or motorised. The track system is packaged with cardboard boxes, paper void fill, cardboard edging for the track and black wrap.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 8302- Base-metal mountings, fittings and similar articles suitable for furniture, doors, staircases, windows, blinds, coachwork, saddlery, trunks, chests, caskets or the like; base-metal hat-racks, hat-pegs, brackets and similar fixtures; castors with mountings of base metal; automatic door closers of base metal GIR 5 (b) has been used to identify the type of packaging. GIR 6 has been used to classify the goods to subheading level 830241-Other mountings, fittings and similar articles; Suitable for buildings 8 Digit Code 83024190 - Other. Also …
- UK 8302419000 Valid Jun 18, 2025 to Jun 17, 2028 · Ruling 600013239 on GOV.UK
2Way is a hand drawn curtain and scenery track system. For use on stage, backstage, studios, auditoriums; it can be used anywhere curtains are required, in commercial or domestic properties. The track is an aluminium extrusion and utilises steel components fitted with wheeled carriers that have either plain or ball raced bearings. The track is available in 20 foot lengths (with custom cut lengths available; to meet design and/or shipping requirements) and can be extended length-wise with a joint set or side-by-side with overlap clips; curved 2Way track lengths can be rolled to any required radius. The track is operated by someone walking the curtain along the track or by hanging statically. The track system is packaged with cardboard boxes, paper void fill, cardboard edging for the track and black wrap.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 8302- Base-metal mountings, fittings and similar articles suitable for furniture, doors, staircases, windows, blinds, coachwork, saddlery, trunks, chests, caskets or the like; base-metal hat-racks, hat-pegs, brackets and similar fixtures; castors with mountings of base metal; automatic door closers of base metal GIR 5 (b) has been used to identify the type of packaging. GIR 6 has been used to classify the goods to subheading level 830241-Other mountings, fittings and similar articles; Suitable for buildings 8 Digit Code 83024190 - Other. Also …
- UK 8302419000 Valid Jun 23, 2025 to Jun 22, 2028 · Ruling 600013342 on GOV.UK
ChainBeam is a variant of our UniBeam tracking system for curtains/drapes and scenery in theatres and film studios worldwide; however, it can be used anywhere curtains are required, such as a domestic property. It is a similar aluminium extrusion to UniBeam I-beam shape and utilises steel components fitted with ball raced runners and carriers; these are inserted into the lower channel of the track to provide a route for either a single or double run of duplex chain. The track is operated by a chain drive motor. It can be either straight or curved; due to the high load capacity it's ideal for moving heavy or specialist loads such as LED screens, lighting or flying performers. This is the heaviest-duty track in the range, ideal for large scenic items, arena drapes, camera tracks, etc. The track system is packaged with cardboard boxes, paper void fill, cardboard edging for the track and black wrap.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 8302- Base-metal mountings, fittings and similar articles suitable for furniture, doors, staircases, windows, blinds, coachwork, saddlery, trunks, chests, caskets or the like; base-metal hat-racks, hat-pegs, brackets and similar fixtures; castors with mountings of base metal; automatic door closers of base metal GIR 5 (b) has been used to identify the type of packaging. GIR 6 has been used to classify the goods to subheading level 830241-Other mountings, fittings and similar articles; Suitable for buildings 8 Digit Code 83024190 - Other. Also …
- UK 8302419000 Valid Jun 23, 2025 to Jun 22, 2028 · Ruling 600013344 on GOV.UK
ChainTrack is a tracking system for curtains/drapes in theatres, film studios and event spaces worldwide; however, it can be used anywhere curtains are required, such as a domestic property. Available in either double or single track, it is a straight bespoke aluminium extrusion; a 3/8" duplex chain runs within the lower section. The track is operated by a chain drive motor; the motors transmit power through a chain sprocket driving the upper section of the duplex chain. The lower section of chain is used to carry the curtains which attach to the chain every 95mm by means of a purpose designed stainless steel hook and metal wire strop, which attach to the eyelets in the curtain webbing. The track system is packaged with cardboard boxes, paper void fill, cardboard edging for the track and black wrap.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 8302- Base-metal mountings, fittings and similar articles suitable for furniture, doors, staircases, windows, blinds, coachwork, saddlery, trunks, chests, caskets or the like; base-metal hat-racks, hat-pegs, brackets and similar fixtures; castors with mountings of base metal; automatic door closers of base metal GIR 5 (b) has been used to identify the type of packaging. GIR 6 has been used to classify the goods to subheading level 830241-Other mountings, fittings and similar articles; Suitable for buildings 8 Digit Code 83024190 - Other. Also …
- UK 8302420090 Valid Apr 22, 2026 to Apr 21, 2029 · Ruling 600015072 on GOV.UK
Black powder coated rack rails, typically manufactured from carbon steel, with standardised rack unit (U) hole spacing in accordance with the 19 inch rack format. Holes may be square for cage nuts or pre tapped threaded holes for screw fixing. They are mounting racking components, designed for permanent installation in standard 19 inch server and equipment racks. They provide vertical and horizontal fixing points to support and position rack mounted equipment. Used to secure rack mountable equipment such as servers, network switches, patch panels, and shelves within a rack cabinet. Non electrical, non mechanical components that do not perform an independent mechanical or electrical function. Supplied in pairs of two, they do not make complete racks or cabinets in their own right and are designed to be installed post-delivery.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 8302 - Base-metal mountings, fittings and similar articles suitable for furniture, doors, staircases, windows, blinds, coachwork, saddlery, trunks, chests, caskets or the like; base-metal hat-racks, hat-pegs, brackets and similar fixtures; castors with mountings of base metal; automatic door closers of base metal GIR 6 - Has been used to classify the goods to subheading level 8302 42 – Other mountings, fittings and similar articles; other, suitable for furniture 10 Digit Code 8302420090 – other than for use in civil aircraft Also classified in …
- UK 8302490099 Valid Jul 8, 2024 to Jul 7, 2027 · Ruling 600010727 on GOV.UK
Base-metal mounting- bracket comes unassembled in kit form Parts designed specifically to attach control touchscreen to a variety of Domino manufactured printers. Although this item is similar to a TV mount this item has been designed to fit Domino products only. "kit" is made up of purchased components individually packed inside plastic bags, which are then packaged inside an outer cardboard carton, ready for assembly at end user site.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: Gir 1 - has been used to classify this product by the terms of heading 8302 - Base-metal mountings, fittings and similar articles suitable for furniture, doors, staircases, windows, blinds, coachwork, saddlery, trunks, chests, caskets or the like; base-metal hat-racks, hat-pegs, brackets and similar fixtures; castors with mountings of base metal; automatic door closers of base metal GIR 2 (a) has been used as the goods are unassembled Gir 5 (b) - has been used to identify the type of packaging Gir 6 - has been used to classify the goods to subheading level - 830249 - Other mountings, fittings and similar articles …
- UK 8302500000 Valid Dec 11, 2024 to Dec 10, 2027 · Ruling 600011915 on GOV.UK
This application is for ‘Brackets’ only Powder coated welded mild steel brackets made for connecting wooden poles in climbing frames and swings sets. Shipped in sets of 8-12 brackets. All metal brackets are solely for the swing and climbing frames, they serve the same purpose Packaged in a cardboard box with cardboard or foam dividers.
Justification
Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General interpretative rules (Gir)s Gir 1 has been used to classify the product by the terms of heading 8302 base metal mountings, fittings and similar articles suitable for furniture, doors, staircases, windows, blinds, coachwork, saddlery, trunks, chests, caskets or the like; base metal hat-racks, hat-pegs, brackets and similar fixtures; castors with mountings of base metal; automatic door closers of base metal Gir 6 has been used to classify the goods to subheading level 830250 hat-racks, hat-pegs, brackets and similar fixtures Also classified in accordance with: Section XV Note 3 Harmonised System Explanatory Notes (HSENs) to heading 8302 - Note (G).
- UK 8302500000 Valid Dec 20, 2024 to Dec 19, 2027 · Ruling 600011991 on GOV.UK
Self Adhesive Metal Hooks Made of stainless steel. The hook has an adhesive backing which sticks to a wall or furniture. Used for lightweight clothing, lightweight towel and other lightweight household articles (Weight capacity 250 grams per hook). 3 Pack Small size Removable Damage free
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 has been used to classify this product by the terms of heading 8302: Base-metal mountings, fittings and similar articles suitable for furniture, doors, staircases, windows, blinds, coachwork, saddlery, trunks, chests, caskets or the like; base-metal hat-racks, hat-pegs, brackets and similar fixtures; castors with mountings of base metal; automatic door closers of base metal GIR 3b has been used as the metal part of the hook is considered to be the essential character GIR 6 has been used to classify the goods to subheading level 830250: Hat-racks, hat-pegs, brackets and similar fixtures Also classified in accordance with: Section Note 2 (c) to Section XV …
- UK 8302500000 Valid Jun 23, 2025 to Jun 22, 2028 · Ruling 600012982 on GOV.UK
A steel wall bracket with wrought iron style scrolling. The wall bracket has a socket diameter of 4 inches and comes with three fixing bolts to hold a tree in place. It is suitable for both domestic use and for use in shop fronts/restaurants. The wall bracket can also be used with hanging baskets.
Justification
Classification has been determined in accordance with the following: - General Interpretative Rules (GIR)s: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - has been used to classify this product by the terms of heading 8302 - Base-metal mountings, fittings and similar articles suitable for furniture, doors, staircases, windows, blinds, coachwork, saddlery, trunks, chests, caskets or the like; base-metal hat-racks, hat-pegs, brackets and similar fixtures; castors with mountings of base metal; automatic door closers of base metal. GIR 6 - has been used to classify the goods to subheading level 830250 - Hat-racks, hat-pegs, brackets and similar fixtures. Also classified in accordance with: Harmonized System Explanatory Notes (HSEN) to Section XV - Note 2(c) and 3. …
- UK 8302500000 Valid Jun 25, 2025 to Jun 24, 2028 · Ruling 600012986 on GOV.UK
Steel metal over-door hangers. The metal hanger is powder coated and available in red, green, black or antique gold. A screw hole is provided at the top for additional fixing if required.
Justification
Classification has been determined in accordance with the following: - General Interpretative Rules (GIR)s: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - has been used to classify this product by the terms of heading 8302 - Base-metal mountings, fittings and similar articles suitable for furniture, doors, staircases, windows, blinds, coachwork, saddlery, trunks, chests, caskets or the like; base-metal hat-racks, hat-pegs, brackets and similar fixtures; castors with mountings of base metal; automatic door closers of base metal. GIR 6 - has been used to classify the goods to subheading level 830250 - Hat-racks, hat-pegs, brackets and similar fixtures. Also classified in accordance with: Harmonized System Explanatory Notes (HSEN) to Section XV - Note 3. Harmonized …
- UK 8302500000 Valid Dec 4, 2025 to Dec 3, 2028 · Ruling 600014039 on GOV.UK
Pack of 20 suction hooks available in wholesale quantities. Their size is approximately 2.2cm. The product is suitable for use on glass, enamel, and tile surfaces. The suction hooks can be removed and replaced elsewhere without damage. The hooks are made of 50% pvc and 50% iron. The product is packaged in retail packs of 20 hooks and is designed for transport and display purposes in blister packaging with an opening for hanging display. There is a clear plastic cover over the items.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 8302 - Base-metal mountings, fittings and similar articles suitable for furniture, doors, staircases, windows, blinds, coachwork, saddlery, trunks, chests, caskets or the like; base-metal hat-racks, hat-pegs, brackets and similar fixtures; castors with mountings of base metal; automatic door closers of base metal. GIR 3(b) - Has been used as the metal hook is considered to be the essential character. GIR 5(b) - Has been used to identify the type of packaging. Packaged in retail packs containing 8 hooks and presented on a card with a slot for …
- UK 8302500000 Valid Dec 4, 2025 to Dec 3, 2028 · Ruling 600014040 on GOV.UK
Pack of 8 suction hooks available in wholesale quantities. Their size is approximately 3.8cm. The product is suitable for use on glass, enamel, and tile surfaces. The suction hooks can be removed and replaced elsewhere without damage. The hooks are made of 60% pvc and 40% iron. The product is packaged in retail packs of 8 hooks and is designed for transport and display purposes in blister packaging with an opening for hanging display. There is a clear plastic cover over the items.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 8302 - Base-metal mountings, fittings and similar articles suitable for furniture, doors, staircases, windows, blinds, coachwork, saddlery, trunks, chests, caskets or the like; base-metal hat-racks, hat-pegs, brackets and similar fixtures; castors with mountings of base metal; automatic door closers of base metal. GIR 3(b) - Has been used as the metal hook is considered to be the essential character. GIR 5(b) - Has been used to identify the type of packaging. Packaged in retail packs containing 8 hooks and presented on a card with a slot for …
- UK 8302500000 Valid Dec 4, 2025 to Dec 3, 2028 · Ruling 600014041 on GOV.UK
Pack of 3 suction hooks available in wholesale quantities. Their size is approximately 6cm. The product is suitable for use on glass, enamel, and tile surfaces. The suction hooks can be removed and replaced elsewhere with no mess or damage. It is made of 70% pvc and 30% iron. The product is packaged in retail packs of 3 hooks and is designed for transport and display purposes in blister packaging with an opening for hanging display. There is a clear plastic cover over the items.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 8302 - Base-metal mountings, fittings and similar articles suitable for furniture, doors, staircases, windows, blinds, coachwork, saddlery, trunks, chests, caskets or the like; base-metal hat-racks, hat-pegs, brackets and similar fixtures; castors with mountings of base metal; automatic door closers of base metal. GIR 3(b) - Has been used as the metal hook is considered to be the essential character. GIR 5(b) - Has been used to identify the type of packaging. Packaged in retail packs containing 8 hooks and presented on a card with a slot for …
- UK 8302500000 Valid Oct 8, 2025 to Oct 7, 2028 · Ruling 600014048 on GOV.UK
Clear hook intended for multipurpose use on an interior wall. Individual hooks are comprised of steel wire and polypropylene, with the hook, the main part of the product being made of steel. Each hook measures 25mm x 25mm and holds approximately 500g in weight. Packaged in retail packs containing 3 hooks and presented on a card with a slot for hanging on a display and with a clear plastic cover over the items
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: Classification has been determined in accordance with the following: GIR 1 has been used to classify this product by the terms of heading 8302 - Base-metal mountings, fittings and similar articles suitable for furniture, doors, staircases, windows, blinds, coachwork, saddlery, trunks, chests, caskets or the like; base-metal hat-racks, hat-pegs, brackets and similar fixtures; castors with mountings of base metal; automatic door closers of base metal. GIR 5 (b) has been used to identify the type of packaging. Packaged in retail packs containing 3 hooks and presented on a card with a slot for hanging on a display and with a …
- UK 8302500000 Valid Oct 15, 2026 to Oct 14, 2029 · Ruling 600016412 on GOV.UK
A steel four-prong wall-mounted tool rack/tool holder. It is fitted with four prongs for hanging cleaning tools and it is intended for attachment to walls or cupboards. The tool rack is finished in a black colour. The dimensions of the rack are 256 mm (L) x 76 mm (W) x 83 mm (H) and the weight is 264g. It is manufactured in China and is packaged in a plastic box.
Justification
Classification has been determined in accordance with the following: - For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect: a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General Interpretative Rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 8302 - Base-metal mountings, fittings and similar articles suitable for furniture, doors, staircases, windows, blinds, coachwork, saddlery, trunks, chests, caskets or the like; base-metal hat-racks, hat-pegs, brackets and similar fixtures; castors with mountings of base metal; automatic door closers of base metal. GIR 5B - Has been used to identify the type of packaging. GIR 6 - Has been used to classify the goods to subheading level 830250 - Hat-racks, hat-pegs, brackets and similar fixtures. Also classified in accordance with: Section XV - Note 3. …
Source: HM Revenue & Customs, Advance Tariff Rulings. Contains public sector information licensed under the Open Government Licence v3.0.
Restrictions and flags for 83020000
- Russia sanctions: import ban Regulation (EU) No 833/2014, Annex XXI 8302
Art. 3i, goods generating significant revenue for Russia
Read the act on EUR-Lex - Russia sanctions: export ban Regulation (EU) No 833/2014, Annex XXIII 8302
Art. 3k, goods contributing to Russian industrial capacity
Read the act on EUR-Lex
For orientation only. Check the act before you rely on a flag; thresholds, derogations and exceptions are not shown in full.
Import VAT in the EU
- Austria 20 %
- Belgium 21 %
- Bulgaria 20 %
- Croatia 25 %
- Cyprus 19 %
- Czechia 21 %
- Denmark 25 %
- Estonia 24 %
- Finland 25.5 %
- France 20 %
- Germany 19 %
- Greece 24 %
- Hungary 27 %
- Ireland 23 %
- Italy 22 %
- Latvia 21 %
- Lithuania 21 %
- Luxembourg 17 %
- Malta 18 %
- Netherlands 21 %
- Poland 23 %
- Portugal 23 %
- Romania 21 %
- Slovakia 23 %
- Slovenia 22 %
- Spain 21 %
- Sweden 25 %
Standard rate per member state, on the customs value, the duty and transport to the destination. Reduced rates often depend on the use or the buyer and apply only where the country provides them for these goods. Source: European Commission, Taxes in Europe Database, as of Nov 2, 2026.
Rules of origin
Preferential rules of origin for subheading 830200 depend on the trade agreement. The Commission publishes them in Access2Markets.
Rules of origin on Access2MarketsInformation
When importing or exporting "Base-metal mountings, fittings and similar articles suitable for furniture, doors, staircases, windows, blinds, coachwork, saddlery, trunks, chests, caskets or the like; base-metal hat-racks, hat-pegs, brackets and similar fixtures; castors with mountings of base metal; automatic door closers of base metal", it is crucial to have the correct HS code or TARIC code. The HS code 8302000000 80 serves as the standard code for this product, ensuring that the appropriate duties and taxes are applied when crossing international borders.
To ensure your business transactions run smoothly when importing or exporting "Base-metal mountings, fittings and similar articles suitable for furniture, doors, staircases, windows, blinds, coachwork, saddlery, trunks, chests, caskets or the like; base-metal hat-racks, hat-pegs, brackets and similar fixtures; castors with mountings of base metal; automatic door closers of base metal", consider the following points:
- Inform yourself about the specific import and export regulations in the countries involved. This includes possible restrictions, taxes, and duties applicable to "Base-metal mountings, fittings and similar articles suitable for furniture, doors, staircases, windows, blinds, coachwork, saddlery, trunks, chests, caskets or the like; base-metal hat-racks, hat-pegs, brackets and similar fixtures; castors with mountings of base metal; automatic door closers of base metal".
- Check if any additional licenses, permits, or certificates are required to import "Base-metal mountings, fittings and similar articles suitable for furniture, doors, staircases, windows, blinds, coachwork, saddlery, trunks, chests, caskets or the like; base-metal hat-racks, hat-pegs, brackets and similar fixtures; castors with mountings of base metal; automatic door closers of base metal" into the destination country or export it from the country of origin.
- Make sure your trading partners have valid identification numbers, such as EORI numbers (Economic Operators Registration and Identification) in the EU, to streamline trade and minimize delays.
- Ensure that all trade- and customs-related documents (such as commercial invoices, packing lists, certificates of origin, and insurance policies) are accurately completed and adhere to the respective national regulations.
- Keep an eye on the current exchange rates, as well as packaging, shipping, and insurance costs, to accurately calculate trade costs.
In summary, the HS code or TARIC code for "Base-metal mountings, fittings and similar articles suitable for furniture, doors, staircases, windows, blinds, coachwork, saddlery, trunks, chests, caskets or the like; base-metal hat-racks, hat-pegs, brackets and similar fixtures; castors with mountings of base metal; automatic door closers of base metal" is 8302000000 80. Make sure you accurately use this code in all your trade and customs documents to guarantee smooth and hassle-free transactions. With these tips, you'll be better prepared for the challenges of international trade and can successfully import and export "Base-metal mountings, fittings and similar articles suitable for furniture, doors, staircases, windows, blinds, coachwork, saddlery, trunks, chests, caskets or the like; base-metal hat-racks, hat-pegs, brackets and similar fixtures; castors with mountings of base metal; automatic door closers of base metal".
HS Code structure
1. Chapter
There are 21 different sections, which are divided into 96 chapters. Exceptional chapters include chapter 77, which is reserved for future use, chapters 98 and 99, which are limited at national level, and chapter 99, which is a specific code for temporary changes. In the example above, chapter 83 was selected for miscellaneous articles of base metal
2. Heading
The heading determines the specific category within a certain chapter. In the example above, the 02 refers to Base-metal mountings, fittings and similar articles suitable for furniture, doors, staircases, windows, blinds, coachwork, saddlery, trunks, chests, caskets or the like; base-metal hat-racks, hat-pegs, brackets and similar fixtures; castors with mountings of base metal; automatic door closers of base metal.
HS Code tree structure
8300000000 80
Chapter MISCELLANEOUS ARTICLES OF BASE METAL
8302000000 80
Base-metal mountings, fittings and similar articles suitable for furniture, doors, staircases, windows, blinds, coachwork, saddlery, trunks, chests, caskets or the like; base-metal hat-racks, hat-pegs, brackets and similar fixtures; castors with mountings of base metal; automatic door closers of base metal
8302100000 80
- Hinges
8302100010 80
- - For use in civil aircraft
8302100020 80
- - Armrest hinge made of magnesium with: - a length of 239mm or more but not more than 270mm, - a width of 150mm or more but not more than 175mm, - a height of 110mm or more but not more than 135mm, - mounting holes for a lock mechanism
8302100090 80
- - Other
8302200000 80
- Castors
8302200010 80
- - For use in civil aircraft
8302200090 80
- - Other
8302300000 80
- Other mountings, fittings and similar articles suitable for motor vehicles
8302300020 80
- - Two cold-formed steel supports: - with a length of 120mm or more but not more than 180mm, - with a width of 50mm or more but not more than 80mm, - with a height of 35mm or more but not more than 80mm, - with a movable riveted connection, - with or without elastomeric bumper, - forming a mechanism for indirect movement of the mechanism of the longitudinal positioner of car seats, interacting with the safety latch, - attached to the mechanism of the longitudinal positioner by means of a detachable screw connection, riveting, welding or spot welding
8302300090 80
- - Other
8302410000 10
- Other mountings, fittings and similar articles
8302410000 80
- - Suitable for buildings
8302411000 80
- - - For doors
8302415000 80
- - - For windows and French windows
8302419000 80
- - - Other
8302420000 80
- - Other, suitable for furniture
8302420010 80
- - - For use in civil aircraft
8302420090 80
- - - Other
8302490000 80
- - Other
8302490010 80
- - - For use in civil aircraft
8302490091 10
- - - Other
8302490091 80
- - - - Aluminium telescopic handle for use in the manufacture of luggage
8302490099 80
- - - - Other
8302500000 80
- Hat-racks, hat-pegs, brackets and similar fixtures
8302600000 80
- Automatic door closers
8302600010 80
- - For use in civil aircraft
8302600090 80
- - Other