HS Code 8306290000 80 Other

Import trade restrictions for 8306290000 80

This table contains information on trade restrictions for the import of goods into the EU and the EU into third countries. The table contains information on trade restrictions which are imposed due to customs unions, preferences, tariff quotas, customs unions, veterinary controls, third country duties and non-preferential tariff quotas.

Duties 55
	Origin country	Start	Duty / Tax	Legal base Measure type
1011	ERGA OMNES 1011	01-07-2016	0 %	Regulation2658/87 Suspension - goods for certain categories of ships, boats and other vessels and for drilling or production platforms 117
1011	ERGA OMNES 1011	01-01-2005	0 %	Regulation2658/87 Third country duty 103
FO	Faroe Islands FO	01-01-1997	0 %	Decision0126/97 Tariff preference 142
XL	Melilla XL	01-01-1999	0 %	Accession act0001/85 Tariff preference 142
PS	Occupied palestinian Territory PS	01-01-2001	0 %	Decision0430/97 Tariff preference 142
AD	Andorra AD	01-01-2006	0 %	Decision0680/90 Customs union duty 106
SM	San Marino SM	01-01-2006	0 %	Decision0245/02 Customs union duty 106
TR	Türkiye TR	01-01-2006	0 %	Decision0142/96 Customs union duty 106
1007	EU-Switzerland agreement: re-imported goods 1007	01-01-2007	0 %	Regulation2840/72 Tariff preference 142
2027	GSP+ (incentive arrangement for sustainable development and good governance) 2027	01-01-2014	0 %	Regulation0978/12 Tariff preference 142
2005	GSP-EBA (Special arrangement for the least-developed countries - Everything But Arms) 2005	01-01-2014	0 %	Regulation0978/12 Tariff preference 142
MD	Moldova, Republic of MD	01-01-2016	0 %	Decision0492/14 Tariff preference 142
EC	Ecuador EC	01-01-2017	0 %	Decision2369/16 Tariff preference 142
2020	GSP - General arrangements 2020	01-01-2017	0 %	Regulation0978/12 Tariff preference 142
GB	United Kingdom GB	01-01-2021	0 %	Decision2253/20 Tariff preference 142
2080	OCTs (Overseas Countries and Territories) 2080	01-01-2021	0 %	Decision1764/21 Tariff preference 142
SG	Singapore SG	01-01-2027	0 %	Decision1875/19 Tariff preference 142
GH	Ghana GH	01-01-2027	0 %	Decision1850/16 Tariff preference 142
CL	Chile CL	01-02-2025	0 %	Decision3016/24 Tariff preference 142
TN	Tunisia TN	01-03-1998	0 %	Decision0238/98 Tariff preference 142
MA	Morocco MA	01-03-2000	0 %	Decision0204/00 Tariff preference 142
LB	Lebanon LB	01-04-2006	0 %	Decision0356/06 Tariff preference 142
JO	Jordan JO	01-05-2002	0 %	Decision0357/02 Tariff preference 142
5500	Mercosur 5500	01-05-2026	0 %	Decision0183/26 Tariff preference 142
EG	Egypt EG	01-06-2004	0 %	Decision0635/04 Tariff preference 142
XC	Ceuta XC	01-07-1991	0 %	Accession act0001/85 Tariff preference 142
2012	EEA - European Economic Area 2012	01-07-2007	0 %	Decision0001/94 Tariff preference 142
KR	Korea, Republic of (South Korea) KR	01-07-2011	0 %	Decision0265/11 Tariff preference 142
MX	Mexico MX	01-07-2016	0 %	Decision0415/00 Tariff preference 142
KE	Kenya KE	01-07-2024	0 %	Decision1647/24 Tariff preference 142
US	United States US	01-07-2026	0 %	Regulation1455/26 Tariff preference 142
2200	Central America 2200	01-08-2013	0 %	Decision0734/12 Tariff preference 142
CO	Colombia CO	01-08-2013	0 %	Decision0735/12 Tariff preference 142
VN	Viet Nam VN	01-08-2020	0 %	Decision0753/20 Tariff preference 142
DZ	Algeria DZ	01-09-2005	0 %	Decision0690/05 Tariff preference 142
GE	Georgia GE	01-09-2014	0 %	Decision0494/14 Tariff preference 142
SY	Syria SY	01-11-1978	0 %	Regulation2216/78 Tariff preference 142
1011	ERGA OMNES 1011	01-11-2026	2 EUR	Regulation2108/26 Union handling fee 800
1011	ERGA OMNES 1011	01-11-2026	3 EUR	Regulation0382/26 Low-value consignment customs duty 107
CI	Ivory Coast CI	02-12-2019	0 %	Decision0156/09 Tariff preference 142
2000	Preferential origin in accordance with the Agreement in the form of an Exchange of Letters between the European Union and the Kingdom of Morocco on the amendment of Protocols 1 and 4 to the Euro-Mediterranean Agreement establishing an association between the European Communities and their Member States, of the one part, and the Kingdom of Morocco, of the other part. 2000	03-10-2025	0 %	Decision2022/25 Tariff preference 142
CM	Cameroon CM	04-08-2014	0 %	Decision0152/09 Tariff preference 142
ZA	South Africa ZA	10-10-2016	0 %	Decision1623/16 Tariff preference 142
1035	SADC EPA 1035	10-10-2016	0 %	Decision1623/16 Tariff preference 142
AM	Armenia AM	10-10-2026 – 11-10-2028	0 %	Regulation2269/26 Tariff preference 142
1034	Eastern and Southern Africa States 1034	14-05-2012	0 %	Decision0196/12 Tariff preference 142
GH	Ghana GH	15-12-2016 – 31-12-2026	0 %	Decision1850/16 Tariff preference 142
IL	Israel IL	16-05-2023	0 %	Decision0855/09 Tariff preference 142
SB	Solomon Islands SB	17-05-2020	0 %	Decision0729/09 Tariff preference 142
CH	Switzerland CH	20-12-1972	0 %	Regulation2840/72 Tariff preference 142
PG	Papua New Guinea PG	20-12-2009	0 %	Decision0729/09 Tariff preference 142
SG	Singapore SG	21-11-2019 – 31-12-2026	0 %	Decision1875/19 Tariff preference 142
FJ	Fiji FJ	28-07-2014	0 %	Decision0729/09 Tariff preference 142
1033	CARIFORUM 1033	29-12-2008	0 %	Decision0805/08 Tariff preference 142
WS	Samoa WS	31-12-2018	0 %	Decision0729/09 Tariff preference 142

Controls and documents 3
	Origin country	Start	Duty / Tax	Legal base Measure type
KP	North Korea (Democratic People’s Republic of Korea) KP	01-09-2017	Document required banned without it	Regulation1509/17 Import control 760
UA	Ukraine UA	24-06-2026	Document required banned without it	Regulation0263/22 Import control 762
UA	Ukraine UA	24-06-2026	Document required banned without it	Regulation0692/14 Import control 760

Explanation of trade restrictions

Erga Omnes means "for all".

Third countries are countries that are not part of the EU.

GSP means "Generalised System of Preferences".

GSP Plus means "Generalised System of Preferences Plus".

European Economic Area (EEA) means all EU member states and Iceland, Liechtenstein and Norway.

OCTs stands for "Overseas Countries and Territories". They are countries and territories that are not part of the EU. More information

CARIFORUM is a regional economic integration organisation comprising 15 Caribbean Community (CARICOM) countries and the Dominican Republic.

SADC EPA stands for "Southern African Development Community - Economic Partnership Agreement".

Duty means "customs duties".

Estimate the import cost for 830629

Customs value Currency

Country of origin Imported into Sold online to a buyer in the EU (distance sale)

Customs value €1,000.00
Customs duty 0 % €0.00
Import VAT 19 % €190.00
Total €1,190.00

May be lower under conditions:

Suspension - goods for certain categories of ships, boats and other vessels and for drilling or production platforms: 0 %

An estimate only. The customs value is the price including transport and insurance to the EU border. Excise duties, other fees and producer-specific anti-dumping rates are not included. Preferential rates need valid proof of origin. Country groups and exclusions: TARIC, as of November 2026.

Export measures for 8306290000

What applies when these goods leave the EU: export controls, dual-use and other authorisations, bans per destination and the supplementary unit of the export declaration.

Measures 1
	Destination	Start	Duty / Tax	Legal base Measure type
KP	North Korea (Democratic People’s Republic of Korea) KP	28-02-2018		Regulation0285/18 Export prohibition 278

History

Duty rates and measures for this code over time (yearly snapshots).

Preferential rules of origin for 8306290000

What the goods must meet to count as originating in a partner country and get the preferential duty, per agreement.

Autonomous Trade Preferences (Western Balkans) · Kosovo
EU-Chile Association Agreement · Chile
EU-Algeria Association Agreement · Algeria
EEA/EFTA agreements (Switzerland, Norway, Liechtenstein, Faroe Islands) · Faroe Islands, Liechtenstein, Norway, Switzerland
EU-Egypt Association Agreement · Egypt
EU-Georgia DCFTA · Georgia
Generalised Scheme of Preferences (GSP, GSP+, EBA) · Armenia, India, Kenya, Pakistan, Samoa, Solomon Islands, Syria, Vietnam
EU-Iceland FTA · Iceland
EU-Jordan Association Agreement · Jordan
EU-Jordan Association Agreement (relaxed rules, 2016) · Jordan
EU-Korea FTA · South Korea
EU-Central America Association Agreement
EU-Lebanon Association Agreement · Lebanon
EU-Morocco Association Agreement · Morocco
EU-Moldova DCFTA · Moldova
Pan-Euro-Mediterranean (PEM) Convention · Albania, Andorra, Bosnia & Herzegovina, Egypt, Faroe Islands, Iceland, Kosovo, Liechtenstein, Montenegro, North Macedonia, Norway, Palestine, Switzerland, Türkiye
EU-Singapore FTA · Singapore
EU-Tunisia Association Agreement · Tunisia
EU-Ukraine DCFTA · Ukraine

Statuettes and other ornaments, of base metal / or: Manufacture from materials of any heading, except that of the product. However, other materials of heading 8306 may be used, provided that their total value does not exceed 30 % of the ex-works price of the product
EPA CARIFORUM
EPA Pacific · Fiji, Papua New Guinea, Samoa, Solomon Islands
EU-Israel Association Agreement · Israel

Statuettes and other ornaments, of base metal / or: Manufacture in which all the materials used are classified within a heading other than that of the product. However, the other materials of heading No 8306 may be used provided their value does not exceed 30 % of the ex-works price of the product
EU-Canada CETA · Canada

A change from any other heading; or A change from within this heading, whether or not there is also a change from any other heading, provided that the value of non-originating materials of this heading does not exceed 50 per cent of the transaction value or ex-works price of the product.
EU-Colombia/Peru/Ecuador Trade Agreement · Colombia, Ecuador, Peru

Statuettes and other ornaments, of base metal / or: Manufacture from materials of any heading, except that of the product. However, other materials of heading 8306 may be used, provided that their total value does not exceed 30 per cent of the ex-works price of the product
EPA Eastern and Southern Africa

Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof; except for: / or: Manufacture in which: all the materials used are classified within a heading other than that of the product; the value of all the materials used does not exceed 40 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
EU Market Access Regulation (EPA) · Cameroon, Côte d’Ivoire, Ghana, Kenya

Statuettes and other ornaments, of base metal / or: Manufacture in which all the materials used is classified within a heading other than that of the product. However, the other materials of heading No 8306 may be used provided their value does not exceed 30 % of the ex-works price of the product
EU-Japan EPA · Japan

CTH; MaxNOM 50 % (EXW); or RVC 55 % (FOB).
EU-Mexico Global Agreement · Mexico

Statuettes and other ornaments, of base metal / or: Manufacture in which all the materials used are classified within a heading other than that of the product. However, the other materials of heading No 8306 may be used provided their value does not exceed 30 % of the ex-works price of the product [125] See note 10, Appendix II(a) for heading No ex84 01 (nuclear fuel elements).
EU-Palestine Interim Association Agreement · Palestine

Statuettes and other ornaments, of base metal / or: Manufacture in which all the materials used are classified within a heading other than that of the product. However, the other materials of heading No 8306 may be used provided their value does not exceed 30% of the ex-works price of the product
EPA SADC · South Africa

Statuettes and other ornaments, of base metal / or: Manufacture in which all the materials used are classified within a heading other than that of the product. However, the other materials of heading No 8306 may be used provided their value does not exceed 30 % of the ex–works price of the product
EU-Viet Nam FTA · Vietnam

Miscellaneous articles of base metal. / or: Manufacture from materials of any heading, except that of the product; or manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product.

Source: European Commission, Access2Markets (CC BY 4.0, shortened). The text of the agreement prevails. Access2Markets

Legal and explanatory notes for 8306290000

Notes to chapter 83

Notes 1. For the purposes of this chapter, parts of base metal are to be classified with their parent articles. However, articles of iron or steel of heading 7312, 7315, 7317, 7318 or 7320, or similar articles of other base metal (Chapters 74 to 76 and 78 to 81) are not to be taken as parts of articles of this chapter. 2. For the purposes of heading 8302, the word ‘castors’ means those having a diameter (including, where appropriate, tyres) not exceeding 75 mm, or those having a diameter (including, where appropriate, tyres) exceeding 75 mm provided that the width of the wheel or tyre fitted thereto is less than 30 mm.

Notes to section XV

BASE METALS AND ARTICLES OF BASE METAL Notes 1. This section does not cover: (a) prepared paints, inks or other products with a basis of metallic flakes or powder (headings 3207 to 3210, 3212, 3213 or 3215); (b) ferro-cerium or other pyrophoric alloys (heading 3606); (c) headgear or parts thereof of heading 6506 or 6507; (d) umbrella frames or other articles of heading 6603; (e) goods of Chapter 71 (for example, precious-metal alloys, base metal clad with precious metal, imitation jewellery); (f) articles of Section XVI (machinery, mechanical appliances and electrical goods); (g) assembled railway or tramway track (heading 8608) or other articles of Section XVII (vehicles, ships and boats, aircraft); (h) instruments or apparatus of Section XVIII, including clock or watch springs; (ij) lead shot prepared for ammunition (heading 9306) or other articles of Section XIX (arms and ammunition); (k) articles of Chapter 94 (for example, furniture, mattress supports, luminaires and lighting fittings, illuminated signs, prefabricated buildings); (l) articles of Chapter 95 (for example, toys, games, sports requisites); (m) hand sieves, buttons, pens, pencil-holders, pen nibs, monopods, bipods, tripods and similar articles or other articles of Chapter 96 (miscellaneous manufactured articles); or (n) articles of Chapter 97 (for example, works of art). 2. Throughout the nomenclature, the expression ‘parts of general use’ means: (a) articles of heading 7307, 7312, 7315, 7317 or 7318 and similar articles of other base metal, other than articles specially designed for use exclusively in implants in medical, surgical, dental or veterinary sciences (heading 9021); (b) springs and leaves for springs, of base metal, other than clock or watch springs (heading 9114); and (c) articles of headings 8301, 8302, 8308, 8310 and frames and mirrors, of base metal, of heading 8306. In Chapters 73 to 76 and 78 to 82 (but not in heading 7315), references to parts of goods do not include references to parts of general use as defined above. Subject to the preceding paragraph and to note 1 to Chapter 83, the articles of Chapter 82 or 83 are excluded from Chapters 72 to 76 and 78 to 81. 3. Throughout the nomenclature, the expression ‘base metals’ means: iron and steel, copper, nickel, aluminium, lead, zinc, tin, tungsten (wolfram), molybdenum, tantalum, magnesium, cobalt, bismuth, cadmium, titanium, zirconium, antimony, manganese, beryllium, chromium, germanium, vanadium, gallium, hafnium, indium, niobium (columbium), rhenium and thallium. 4. Throughout the nomenclature, the term ‘cermets’ means products containing a microscopic heterogeneous combination of a metallic component and a ceramic component. The term ‘cermets’ includes sintered metal carbides (metal carbides sintered with a metal). 5. Classification of alloys (other than ferro-alloys and master alloys as defined in Chapters 72 and 74): (a) An alloy of base metals is to be classified as an alloy of the metal which predominates by weight over each of the other metals. (b) An alloy composed of base metals of this section and of elements not falling within this section is to be treated as an alloy of base metals of this section if the total weight of such metals equals or exceeds the total weight of the other elements present. (c) In this section, the term ‘alloys’ includes sintered mixtures of metal powders, heterogeneous intimate mixtures obtained by melting (other than cermets) and intermetallic compounds. 6. Unless the context otherwise requires, any reference in the nomenclature to a base metal includes a reference to alloys which, by virtue of note 5 above, are to be classified as alloys of that metal. 7. Classification of composite articles: Except where the headings otherwise require, articles of base metal (including articles of mixed materials treated as articles of base metal under the general interpretative rules) containing two or more base metals are to be treated as articles of the base metal predominating by weight over each of the other metals. For this purpose: (a) Iron and steel, or different kinds of iron or steel, are regarded as one and the same metal. (b) An alloy is regarded as being entirely composed of that metal as an alloy of which, by virtue of note 5, it is classified. (c) A cermet of heading 8113 is regarded as a single base metal. 8. In this section, the following expressions have the meanings hereby assigned to them: (a) Waste and scrap (1) all metal waste and scrap; (2) metal goods definitely not usable as such because of breakage, cutting-up, wear or other reasons. (b) Powders Products of which 90 % or more by weight passes through a sieve having a mesh aperture of 1 mm. 9. For the purposes of Chapters 74 to 76 and 78 to 81, the following expressions have the meanings hereby assigned to them: (a) Bars and rods Rolled, extruded, drawn or forged products, not in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including ‘flattened circles’ and ‘modified rectangles’, of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross-section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including ‘modified rectangular’) cross-section exceeds one-tenth of the width. The expression also covers cast or sintered products, of the same forms and dimensions, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings. Wire-bars and billets of Chapter 74 with their ends tapered or otherwise worked simply to facilitate their entry into machines for converting them into, for example, drawing stock (wire-rod) or tubes, are however to be taken to be unwrought copper of heading 7403. This provision applies mutatis mutandis to the products of Chapter 81. (b) Profiles Rolled, extruded, drawn, forged or formed products, coiled or not, of a uniform cross-section along their whole length, which do not conform to any of the definitions of bars, rods, wire, plates, sheets, strip, foil, tubes or pipes. The expression also covers cast or sintered products, of the same forms, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings. (c) Wire Rolled, extruded or drawn products, in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including ‘flattened circles’ and ‘modified rectangles’, of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross-section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including ‘modified rectangular’) cross-section exceeds one-tenth of the width. (d) Plates, sheets, strip and foil Flat-surfaced products (other than the unwrought products), coiled or not, of solid rectangular (other than square) cross-section with or without rounded corners (including ‘modified rectangles’ of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel) of a uniform thickness, which are: - of rectangular (including square) shape with a thickness not exceeding one-tenth of the width - of a shape other than rectangular or square, of any size, provided that they do not assume the character of articles or products of other headings. Headings for plates, sheets, strip, and foil apply, inter alia, to plates, sheets, strip, and foil with patterns (for example, grooves, ribs, chequers, tears, buttons, lozenges) and to such products which have been perforated, corrugated, polished or coated, provided that they do not thereby assume the character of articles or products of other headings. (e) Tubes and pipes Hollow products, coiled or not, which have a uniform cross-section with only one enclosed void along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons, and which have a uniform wall thickness. Products with a rectangular (including square), equilateral triangular or regular convex polygonal cross-section, which may have corners rounded along their whole length, are also to be considered as tubes and pipes provided the inner and outer cross-sections are concentric and have the same form and orientation. Tubes and pipes of the foregoing cross-sections may be polished, coated, bent, threaded, drilled, waisted, expanded, cone-shaped or fitted with flanges, collars or rings.

Other explanatory notes for the chapter

Note 4 Unless otherwise indicated, transmission can also be made by means of devices (whether or not built into the individual components) which use infra-red rays, radio waves or laser beams etc. over short distances.

Additional note 1 A. Tools for the assembly or maintenance of machines To be classified with the appropriate machines, assembly or maintenance tools must satisfy the following three conditions concerning their nature, intended use and presentation: 1. they must be tools, i.e., hand tools of heading 4417 00 00 or 8205 or, for example, tools falling in subheading 8203 20 00, 8203 30 00, 8203 40 00, 8204 11 00, 8204 12 00, 9603 29 80, 9603 30 90, 9603 40 10, 9603 40 90, 9603 90 91 or 9603 90 99. Measuring and checking instruments of Chapter 90 are excluded in all cases; 2. they must be intended for the assembly or maintenance of the appropriate machine. Where the tools are identical, only those which must be used simultaneously are to be classified with their machines. Where they are different, only one of each kind of tool is allowed; 3. they must be presented for customs clearance at the same time as the appropriate machines. B. Interchangeable tools To be classified with the appropriate machines, interchangeable tools must fulfil three conditions: 1. they must be tools, i.e., tools falling in heading 8207 or, for example, tools falling in headings 4016, 5911 and 6909 or in subheading 4205 00 11, 4205 00 19, 6804 10 00, 6804 21 00, 6804 22 12, 6804 22 18, 6804 22 30, 6804 22 50, 6804 22 90, 6804 23 00 or 9603 50 00. Moulds (heading 8480) and accessories, including accessory apparatus (of, for example, heading 8466), are not considered as tools and consequently do not qualify under this additional note; 2. they must form part of the normal equipment of the appropriate machines. The following are considered part of the normal equipment of a machine: (a) any number of identical tools which can be accommodated on the machine simultaneously; (b) one of each kind of tool if the tools are different; 3. they must normally be sold with the appropriate machine and be presented for customs clearance with it.

Additional note 3 A machine in a disassembled or unassembled state may be imported in several consignments over a period of time, if this is necessary for convenience of trade or transport. In order to be able to declare the different constituent parts under the same tariff heading or subheading as the assembled machine, the declarant must make a request in writing to the customs post not later than the first consignment and attach: (a) a diagram or, if necessary several diagrams, of the machine showing the serial numbers of the most important constituent parts; (b) a general inventory containing an indication of the characteristics and approximate weights of the different parts and the serial numbers of the principal parts referred to above. The application may be accepted only in fulfilment of a contract for the supply or a machine which can be regarded as complete for the purposes of the Combined Nomenclature. All the constituent parts must be imported through the same entry point within the allowed time. However, in special cases, the competent authorities may authorise importation through several points of entry. This time limit may not be exceeded unless a reasoned and justified request for an extension is made to the competent authorities. Upon each partial importation, a list of the parts making up the consignment with references to the aforementioned general inventory must be provided. The customs declaration for each consignment must contain descriptions of both the part or parts making up the consignment and the complete machine.

Sources: Combined Nomenclature 2026, Annex I to Regulation (EEC) No 2658/87 (CELEX 32025R1926), and the Explanatory Notes to the Combined Nomenclature (CELEX 02019XC0329(02)-20260213). The section and chapter notes are legally binding; the explanatory notes are guidance. EUR-Lex

UK advance tariff rulings for 8306290000

Rulings of HM Revenue & Customs for goods with UK commodity codes that start like this EU code. The UK tariff differs from the EU tariff, so these rulings are guidance for the EU.

UK 8306290000 Valid Feb 26, 2024 to Feb 25, 2027 · Ruling 600009867 on GOV.UK

A conical gold decorative/ornamental plant pot container of base metal (mild steel with a EPL gold finish - (not of precious metal/gold plated)) with a dimple affect and a decorative embossing situated on the front of the pot. The product serves as a decorative container in the form of a planter for decorating apartments. The planter is designed to only hold artificial flowers/fake plastic plants (no drainage holes.) For indoor use only. This is packaged individually for retail sale. Dimensions Diameter 21 x Height 22cm

Justification

Classification has been determined in accordance with the following: - General Interpretative Rules (GIR)s: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - Has been used to classify this product by the terms of heading 8306 - Bells, gongs and the like, non-electric, of base metal; statuettes and other ornaments, of base metal; photograph, picture or similar frames, of base metal; mirrors of base metal. GIR 5(B) - Has been used to identify the type of packaging used - Packaged individually for retail sale. GIR 6 - Has been used to classify the goods to subheading level 8306 29 - Statuettes and other ornaments, Other than plated with precious metal. Also Classified in Accordance with: Harmonized System Explanatory Notes (HSENs) (B) (3) to Heading 8306
UK 8306290000 Valid Mar 8, 2024 to Mar 7, 2027 · Ruling 600009969 on GOV.UK

The product is a decorative item made of copper finished with a coloured glaze in the style of a miniature vase. Its main function is to serve as a decorative item for the home. The glaze is applied using the minakari process. Colour is mainly various shades of blue Dimensions are 10cm (h) and 6cm at its widest. Weight is 350grams

Justification

Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 8306 - Bells, gongs and the like, non-electric, of base metal; statuettes and other ornaments, of base metal; photograph, picture or similar frames, of base metal; mirrors of base metal GIR 5 (b) has been used to identify normal packaging for transport GIR 6 has been used to classify the goods to sub-heading 830629 - Statuettes and other ornaments; other than plated with precious metal Also classified in accordance with :- Note 3 to section XV Harmonised Standard Explanatory Notes (HSENs) (exclusion) to heading – 7418 note D refers Harmonised Standard …
UK 8306290000 Valid Apr 4, 2024 to Apr 3, 2027 · Ruling 600010085 on GOV.UK

A hand made, scale model of a 1938 Alfa Romeo. This model is a 1:15 scale of the 2.9 Le Mans Coupe and engine crafted by Gerald Wingrove. This is a finely detailed scratch-built static model with hinged opening doors, constructed from mainly brass, copper and aluminium parts, finished in red livery, with wire-spoked wheels shod with rubber tyres. The model is 30.5cm long, with display base; offered together with 1:15 scale model engine, constructed in metal similar to the car, on a polished metal stand. Both contained together within green baize padded two-tiered plywood storage case with sliding lid. The hand made scale model was based on the original vehicle from 1938 where the Mille Miglia Roadstar were produced by the Alfa Corse racing team specifically for racing at the 1938 Le Mans 24-Hour endurance race.

Justification

Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading 8306 - Bells, gongs and the like, non-electric, of base metal; statuettes and other ornaments, of base metal; photograph, picture or similar frames, of base metal; mirrors of base metal. GIR 3B - has been used as the base metal is considered to be the essential character. GIR 6 - has been used to classify the goods to subheading level 830629 - Statuettes and other ornaments, Other than plated with precious metal. Also classified in accordance with: Note 3 to Section XV Harmonised system explanatory notes (HSENs) Note (B) to Heading 8306 …

+ 16 more

UK 8306290000 Valid Apr 4, 2024 to Apr 3, 2027 · Ruling 600010086 on GOV.UK

A hand made, scale model of a 1933 Alfa Romeo. This model is a 1:15 scale of the 8c 2300 Monza crafted by Gerald Wingrove. This is a finely detailed scratch-built static model with hinged bonnet revealing engine, constructed from mainly brass, copper and aluminium parts, finished in red livery, with wire-spoked wheels shod with rubber tyres. The model is 27cm long, with display base, contained in green baize padded plywood storage case with sliding lid. The hand made scale model was based on the original 1931 Alfa Romeo 8c 2300 Touring Spider race cars.

Justification

Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading 8306 - Bells, gongs and the like, non-electric, of base metal; statuettes and other ornaments, of base metal; photograph, picture or similar frames, of base metal; mirrors of base metal. GIR 3B - has been used as the base metal is considered to be the essential character. GIR 6 - has been used to classify the goods to subheading level 830629 - Statuettes and other ornaments, Other than plated with precious metal. Also classified in accordance with: Note 3 to Section XV Harmonised system explanatory notes (HSENs) Note (B) to Heading 8306 …
UK 8306290000 Valid Apr 4, 2024 to Apr 3, 2027 · Ruling 600010087 on GOV.UK

A hand made, scale model of a 1932 Alfa Romeo. This model is a 1:15 scale of the P3 Monoposto crafted by Gerald Wingrove. This is a finely detailed scratch-built static model with hinged bonnet revealing engine, constructed from mainly brass, copper and aluminium parts, finished in maroon livery, with wire-spoked wheels shod with rubber tyres. The model is 25cm long; with display base, model contained in green baize padded plywood storage case with sliding lid. The hand made scale model was based on the original 1932 Alfa Romeo P3 Monoposto.

Justification

Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading 8306 - Bells, gongs and the like, non-electric, of base metal; statuettes and other ornaments, of base metal; photograph, picture or similar frames, of base metal; mirrors of base metal. GIR 3B - has been used as the base metal is considered to be the essential character. GIR 6 - has been used to classify the goods to subheading level 830629 - Statuettes and other ornaments, Other than plated with precious metal. Also classified in accordance with: Note 3 to Section XV Harmonised system explanatory notes (HSENs) Note (B) to Heading 8306 …
UK 8306290000 Valid Apr 4, 2024 to Apr 3, 2027 · Ruling 600010088 on GOV.UK

A hand-made scale model of a 1938 Alfa Romeo. This model is a 1:15 scale of the 2.9 8c Mille Miglia and crafted by Gerald Wingrove. This is a finely detailed scratch-built static model with hinged bonnet revealing engine, constructed from mainly brass, copper and aluminium parts and finished in red livery with wire-spoked wheels shod with rubber tyres. The model measures approx. 28.5cm long and it is displayed in green baize padded plywood storage case with sliding lid, with display base and case. The hand made scale model was based on the original vehicle from 1938 where the Mille Miglia were produced by Alfa Corse racing team for the 1938 Mille Miglia open road event using the Carrozzeria Touring Superleggera open bodywork.

Justification

Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading 8306 - Bells, gongs and the like, non-electric, of base metal; statuettes and other ornaments, of base metal; photograph, picture or similar frames, of base metal; mirrors of base metal. GIR 3B - has been used as the (The base metal) is considered to be the essential character. GIR 6 - has been used to classify the goods to subheading level 830629 - Statuettes and other ornaments, Other than plated with precious metal. Also classified in accordance with: Note 3 to Section XV Harmonised system explanatory notes (HSENs) Note (B) to 8306 Harmonised …
UK 8306290000 Valid Apr 4, 2024 to Apr 3, 2027 · Ruling 600010089 on GOV.UK

A hand-made scale model of a 1924 Grand Prix de Lyon Bugatti type 35. This model is a 1:8 scale of the model was crafted by Jean-Paul Fontanelle of Art Collection Auto of France. This is a finely detailed model constructed from in excess of 700 steel, brass and aluminium parts, finished in 'Bugatti Blue' livery, with opening bonnet revealing detailed engine, cockpit with leather seat, aluminium fascia with instrument panel, functioning steering, 'artillery' style wheels with rubber tyres, measuring approximately 47cm long, on a mirrored wooden display base.

Justification

Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading 8306 - Bells, gongs and the like, non-electric, of base metal; statuettes and other ornaments, of base metal; photograph, picture or similar frames, of base metal; mirrors of base metal. GIR 3B - has been used as the (The base metal) is considered to be the essential character. GIR 6 - has been used to classify the goods to subheading level 830629 - Statuettes and other ornaments, Other than plated with precious metal. Also classified in accordance with: Note 3 to Section XV Harmonised system explanatory notes (HSENs) Note (B) to 8306 Harmonised …
UK 8306290000 Valid Apr 4, 2024 to Apr 3, 2027 · Ruling 600010090 on GOV.UK

A hand made 1:8 scale limited edition model of a 1937 Bugatti Type 57 “Tank”, by Sean McKenna a Scottish model maker based in France probably produced from the mid 1990's. Finely detailed scratch-built static model constructed from mainly metal parts. Finished in two-tone blue finish, wire-spoked wheels with rubber tyres, with opening bonnet revealing engine detail, approx. 40cm long, contained in display case. This model was based on the road-going Type 57 Grand Touring car, designed by Ettore Bugatti’s son, Jean Bugatti.

Justification

Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading 8306 - Bells, gongs and the like, non-electric, of base metal; statuettes and other ornaments, of base metal; photograph, picture or similar frames, of base metal; mirrors of base metal. GIR 3B - has been used as the (The base metal) is considered to be the essential character. GIR 6 - has been used to classify the goods to subheading level 830629 - Statuettes and other ornaments, Other than plated with precious metal. Also classified in accordance with: Note 3 to Section XV Harmonised system explanatory notes (HSENs) Note (B) to 8306 Harmonised …
UK 8306290000 Valid Apr 16, 2024 to Apr 15, 2027 · Ruling 600010104 on GOV.UK

This product is a mirrored surfaced vase that is made by blow-moulding a single sheet of aluminium, followed by a cutting and welding process.

Justification

Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 – has been used to classify this product by the terms of heading 8306 - Bells, gongs and the like, non-electric, of base metal; statuettes and other ornaments, of base metal; photograph, picture or similar frames, of base metal; mirrors of base metal GIR 6 – has been used to classify the goods to subheading level 830629 - Statuettes and other ornaments - Other than plated with precious metal Also classified in accordance with: Harmonised System Explanatory Notes (HSENs) Note B(3) to heading 8306
UK 8306290000 Valid May 9, 2024 to May 8, 2027 · Ruling 600010413 on GOV.UK

Set of 3 Pimlico Lantern Candle Holders in a stainless steel casing. Stainless Steel, Glass H38 x W17 x D17 cm

Justification

Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: Gir 1 has been used to classify this product by the terms of heading 8306 statuettes and other ornaments, of base metal. Gir 3c has been used as it is considered there is no essential character and therefore has been classified to last in numerical order within the tariff. Gir 6 has been used to classify the goods to subheading level 830629 other than plated with precious metal. Also classified in accordance with : Harmonised System Explanatory Notes (HSENs) heading 8306
UK 8306290000 Valid Sep 3, 2024 to Sep 2, 2027 · Ruling 600011025 on GOV.UK

Round Presentation coin made from zinc alloy with embossed images on one side in various sizes. NOT OF LEGAL TENDER, ORNAMENTAL WITH NO NUMISMATIC INTEREST.

Justification

Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect- a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIRs): GIR 1 has been used to classify this product by the terms of the heading 8306 bells, gongs and the like, non-electric, of base metal; statuettes and other ornaments, of base metal; photograph, picture or similar frames, of base metal; mirrors of base metal GIR 6 has been used to classify the goods to subheading level 830629 statuettes and other ornaments, other than plated with precious metal Also classified in accordance with: Note (b) to Heading 8306 Note 3 to section XV Harmonized System Explanatory Notes (HSEN’s) to heading 8306 note (B)
UK 8306290000 Valid Sep 23, 2024 to Sep 22, 2027 · Ruling 600011132 on GOV.UK

The product is a decorative ornament of a human torso, from the neck down to thigh. The material is made from aluminium and finished with a gold colour through a process called electroplating which gives its desired look. Product is for indoor use around the home only and height is 23 cm and weight 1.4kg. Packaged into a brown carton.

Justification

Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 8306 - Bells, gongs and the like, non-electric, of base metal; statuettes and other ornaments, of base metal; photograph, picture or similar frames, of base metal; mirrors of base metal. GIR 5 (b) has been used to identify packaging as brown carton. GIR 6 has been used to classify the goods to sub-heading 830629 - Statuettes and other ornaments; other than plated with precious metal. Also classified in accordance with :- Note 3 to section XV Harmonised Standard Explanatory Notes (HSENs) heading 8306 Part (B)(1)
UK 8306290000 Valid Sep 30, 2024 to Sep 29, 2027 · Ruling 600011135 on GOV.UK

The product is a decorative ornamental lantern for the use around the home. These are made from iron and have a flat inside without screws or recess. Lanterns have a different finish applied for gold effect, powder coat and lacquer for colours like white or grey. Lanterns are hollow inside. There is no provision/recess to hold a candle. The big one is 37cm x 33cm x 28cm (H x W x D), while the small one is 30cm x 28cm x 25cm (H x W X D). Packaged in a plain brown carton. Lanterns only

Justification

Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 8306 - Bells, gongs and the like, non-electric, of base metal; statuettes and other ornaments, of base metal; photograph, picture, or similar frames, of base metal; mirrors of base metal. GIR 5(b) has been used to identify packaging as brown carton. GIR 6 has been used to classify the goods to subheading level 830629 other than plated with precious metal. Also classified in accordance with : Note 3 to section XV Harmonised System Explanatory Notes (HSENs) heading 8306
UK 8306290000 Valid Sep 30, 2024 to Sep 29, 2027 · Ruling 600011318 on GOV.UK

The product is a decorative ornamental vase, that is handmade. The material is aluminium casting as the base metal. The vases have different finishes which is applied by powder coat and lacquer to form colours of terracotta, white and grey. There is an opening at the top to hold flowers, with a handle on the side. Packaged in a plain brown carton.

Justification

Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 8306 - Bells, gongs and the like, non-electric, of base metal; statuettes and other ornaments, of base metal; photograph, picture or similar frames, of base metal; mirrors of base metal. GIR 5 (b) has been used to identify packaging as brown carton. GIR 6 has been used to classify the goods to sub-heading 830629 - Statuettes and other ornaments; other than plated with precious metal. Also classified in accordance with :- Note 3 to section XV Harmonised Standard Explanatory Notes (HSENs) heading 8306 Part (B)(1)
UK 8306290000 Valid Oct 9, 2024 to Oct 8, 2027 · Ruling 600011319 on GOV.UK

The product is a decorative ornamental bowl, made from aluminium casting as the base metal. It goes through a process of electroplating to give a finish look of gold, but not plated with gold. The design of the bowl is with a wavy edge. Used around the home on table tops or shelves. Product is then packaged in a plain brown carton.

Justification

Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 8306 - Bells, gongs and the like, non-electric, of base metal; statuettes and other ornaments, of base metal; photograph, picture or similar frames, of base metal; mirrors of base metal. GIR 5 (b) has been used to identify packaging as brown carton. GIR 6 has been used to classify the goods to sub-heading 830629 - Statuettes and other ornaments; other than plated with precious metal. Also classified in accordance with :- Note 3 to section XV Harmonised Standard Explanatory Notes (HSENs) heading 8306 Part (B)(1)
UK 8306290000 Valid Jan 8, 2025 to Jan 7, 2028 · Ruling 600011320 on GOV.UK

The product is a set of 3 decorative metal trays for use around the home. The three tray sizes are small (6cm x 30cm x 13cm), medium (8cm x 51cm x 18cm) and large (8cm x 70cm x 25cm). These are made from aluminium casting as the base metal and then provided a gold finish on top through electroplating but not plated in gold. These products are usually placed on table tops or on shelving. Packaged and shipped out to consumers in a plain brown carton.

Justification

Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 8306 - Bells, gongs and the like, non-electric, of base metal; statuettes and other ornaments, of base metal; photograph, picture, or similar frames, of base metal; mirrors of base metal. GIR 5(b) has been used to identify packaging as brown carton. GIR 6 has been used to classify the goods to subheading level 830629 Statuettes and other ornaments: other than plated with precious metal. Also classified in accordance with : Note 3 to section XV Harmonised System Explanatory Notes (HSENs) to heading 8306 (B) (1) refers.
UK 8306290000 Valid Nov 7, 2024 to Nov 6, 2027 · Ruling 600011321 on GOV.UK

The product is a decorative animal, with a dog standing. Made from aluminium casting as a base metal, it then goes through a process of electroplating to give a finish look of gold, but not plated with gold. Purely used for decorative or ornamental purposes around the home, on table tops or on shelves. Packaged in a brown carton.

Justification

Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 8306 - Bells, gongs and the like, non-electric, of base metal; statuettes and other ornaments, of base metal; photograph, picture, or similar frames, of base metal; mirrors of base metal. GIR 5(b) has been used to identify packaging as brown carton. GIR 6 has been used to classify the goods to subheading level 830629 -Statuettes and other ornaments; other than plated with precious metal. Also classified in accordance with : Note 3 to section XV Harmonised System Explanatory Notes (HSENs) heading 8306
UK 8306290000 Valid Nov 11, 2024 to Nov 10, 2027 · Ruling 600011322 on GOV.UK

The product is a decorative ornament of a person in a sitting position to be used around the home. Material is made from aluminium casting as the base metal. It then goes through a process of electroplating to give a finish look of gold, but not plated with gold. The ornament is to be placed on shelving or table tops. Packaged in a brown carton.

Justification

Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 8306 - Bells, gongs and the like, non-electric, of base metal; statuettes and other ornaments, of base metal; photograph, picture, or similar frames, of base metal; mirrors of base metal. GIR 5(b) has been used to identify packaging as brown carton. GIR 6 has been used to classify the goods to subheading level 830629 - Statuettes and other ornaments; other than plated with precious metal. Also classified in accordance with : Note 3 to section XV Harmonised System Explanatory Notes (HSENs) heading 8306
UK 8306290000 Valid Sep 24, 2026 to Sep 23, 2029 · Ruling 600016880 on GOV.UK

Decorative bookends made from iron with blue painted coating. They have been laser cut and bent to shape into an ornamental silhouette figure of a male folklore character leaning against a house wall with FABRICATI DIEM, PVNC etched underneath. Stands on either end to hold up books on a book shelf. Packaged in a coloured cardboard box.

Justification

Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 8306: Bells, gongs and the like, non-electric, of base metal; statuettes and other ornaments, of base metal; photograph, picture or similar frames, of base metal; mirrors of base metal. GIR 3B has been used as the decorative value is considered to be the essential character. GIR 5(b) has been used to identify the type of packaging: Packaged in coloured cardboard box GIR 6 has been used to classify the goods to subheading 830629: Statuettes and other ornaments; Other than plated with precious metal Also classified in accordance with: General Section …

Source: HM Revenue & Customs, Advance Tariff Rulings. Contains public sector information licensed under the Open Government Licence v3.0.

EU trade in 2025 for 830629

Extra-EU imports: €402M; 59,876 t
Extra-EU exports: €141.7M

Top origin countries by import value

China €314M
India €50.8M
United Kingdom €6.3M
United States €6M
Thailand €4.7M

CN8 codes below this code: 1. Source: Eurostat, Comext, CC BY 4.0, processed by hscode.info. Confidential trade is not allocated to codes.

UK import duty for 830629

Third-country duties of all UK commodity codes under this HS subheading. Source: UK Department for Business and Trade, as of Nov 2, 2026. The UK tariff differs from the EU tariff.

Import VAT in the EU

Austria 20 %
Belgium 21 %
Bulgaria 20 %
Croatia 25 %
Cyprus 19 %
Czechia 21 %
Denmark 25 %
Estonia 24 % maybe 9 %
Finland 25.5 %
France 20 %
Germany 19 %
Greece 24 %
Hungary 27 %
Ireland 23 %
Italy 22 %
Latvia 21 %
Lithuania 21 %
Luxembourg 17 %
Malta 18 %
Netherlands 21 %
Poland 23 %
Portugal 23 %
Romania 21 %
Slovakia 23 %
Slovenia 22 %
Spain 21 %
Sweden 25 %

Standard rate per member state, on the customs value, the duty and transport to the destination. Reduced rates often depend on the use or the buyer and apply only where the country provides them for these goods. Source: European Commission, Taxes in Europe Database, as of Nov 2, 2026.

Rules of origin

Preferential rules of origin for subheading 830629 depend on the trade agreement. The Commission publishes them in Access2Markets.

Rules of origin on Access2Markets

Information

When importing or exporting "Other", it is crucial to have the correct HS code or TARIC code. The HS code 8306290000 80 serves as the standard code for this product, ensuring that the appropriate duties and taxes are applied when crossing international borders.

To ensure your business transactions run smoothly when importing or exporting "Other", consider the following points:

Inform yourself about the specific import and export regulations in the countries involved. This includes possible restrictions, taxes, and duties applicable to "Other".
Check if any additional licenses, permits, or certificates are required to import "Other" into the destination country or export it from the country of origin.
Make sure your trading partners have valid identification numbers, such as EORI numbers (Economic Operators Registration and Identification) in the EU, to streamline trade and minimize delays.
Ensure that all trade- and customs-related documents (such as commercial invoices, packing lists, certificates of origin, and insurance policies) are accurately completed and adhere to the respective national regulations.
Keep an eye on the current exchange rates, as well as packaging, shipping, and insurance costs, to accurately calculate trade costs.

In summary, the HS code or TARIC code for "Other" is 8306290000 80. Make sure you accurately use this code in all your trade and customs documents to guarantee smooth and hassle-free transactions. With these tips, you'll be better prepared for the challenges of international trade and can successfully import and export "Other".

HS Code structure

1. Chapter

There are 21 different sections, which are divided into 96 chapters. Exceptional chapters include chapter 77, which is reserved for future use, chapters 98 and 99, which are limited at national level, and chapter 99, which is a specific code for temporary changes. In the example above, chapter 83 was selected for miscellaneous articles of base metal

2. Heading

The heading determines the specific category within a certain chapter. In the example above, the 06 refers to Bells, gongs and the like, non-electric, of base metal; statuettes and other ornaments, of base metal; photograph, picture or similar frames, of base metal; mirrors of base metal.

3. Subheading

The last two digits of the international harmonized code are more specific and define subcategories of products. In the example above, the 29 refers to Other.

HS Code tree structure

8300000000 80

Chapter MISCELLANEOUS ARTICLES OF BASE METAL

8306000000 80

Bells, gongs and the like, non-electric, of base metal; statuettes and other ornaments, of base metal; photograph, picture or similar frames, of base metal; mirrors of base metal

8306100000 80

- Bells, gongs and the like

8306210000 10

- Statuettes and other ornaments

8306210000 80

- - Plated with precious metal

8306290000 80

- - Other

8306300000 80

- Photograph, picture or similar frames; mirrors

Tariff number 8306290000 80 - Other