Import trade restrictions for 8481800000 80
Duties for more codes with a free account
You have looked at the duties of 10 codes today. Sign up free to see duties, measures and history for every code.
Preferential rules of origin for 8481800000
What the goods must meet to count as originating in a partner country and get the preferential duty, per agreement.
Autonomous Trade Preferences (Western Balkans) · Kosovo
EU-Algeria Association Agreement · Algeria
EU-Egypt Association Agreement · Egypt
EU-Jordan Association Agreement · Jordan
EU-Morocco Association Agreement · Morocco
EU-Tunisia Association Agreement · Tunisia
Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof; except for: / or: Manufacture: from materials of any heading, except that of the product, and in which the value of all the materials used does not exceed 40 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
Generalised Scheme of Preferences (GSP, GSP+, EBA) · Armenia, India, Kenya, Pakistan, Samoa, Solomon Islands, Syria, Vietnam
EU-Jordan Association Agreement (relaxed rules, 2016) · Jordan
Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof; except for: / or: Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
EU-Canada CETA · Canada
A change from any other heading; or A change from within any one of these headings, whether or not there is also a change from any other heading, provided that the value of non-originating materials classified in the same heading as the final product does not exceed 50 per cent of the transaction value or ex-works price of the product.
EU-Chile Association Agreement · Chile
Taps, cocks, valves and similars appliances for pipes, boiled hells, tanks, vats or the like, including presure reducing valves and thermostatically controlled valves:
— Other appliances / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
EU-Colombia/Peru/Ecuador Trade Agreement · Colombia, Ecuador, Peru
Taps, cocks, valves and similar appliances for pipes, boiler shells, tanks, vats or the like, including pressure-reducing valves and thermostatically controlled valves / or: Manufacture from materials of any heading, except that of the product / or: Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product
EPA CARIFORUM
Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof; except for: / or: Manufacture in which: – all the materials used are classified within a heading other than that of the product; – the value of all the materials used does not exceed 40 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
EU Market Access Regulation (EPA) · Cameroon, Côte d’Ivoire, Ghana, Kenya
Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof; except for: / or: Manufacture in which: all the materials used are classified within a heading other than that of the product; the value of all the materials used does not exceed 40 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
EU-Japan EPA · Japan
CTH; MaxNOM 50 % (EXW); or RVC 55 % (FOB).
EU-Korea FTA · South Korea
Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof; except for: / or: Manufacture from materials of any heading, except that of the product / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
EU-Lebanon Association Agreement · Lebanon
Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof; except for: / or: Manufacture: from materials of any heading, except that of the product, in which the value of all the materials used does not exceed 40 % of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
EU-Mexico Global Agreement · Mexico
Taps, cocks, valves and similar appliances, for pipes, boiler shells, tanks, vats or the like, including pressure-reducing valves and thermostatically controlled valves; parts thereof / or: Manufacture in which all the materials used are classified within a heading other than that of the product / or: Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
EU-Palestine Interim Association Agreement · Palestine
Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof; except for: / or: Manufacture in which: all the materials used are classified within a heading other than that of the product; the value of all the materials used does not exceed 40% of the ex-works price of the product / or: Manufacture in which the value of all the materials used does not exceed 30% of the ex-works price of the product
EU-Singapore FTA · Singapore
Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof; except for: / or: Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 60 % of the ex-works price of the product
EU-Viet Nam FTA · Vietnam
taps, cocks, valves and similar appliances for pipes, boiler shells, tanks, vats or the like, including pressure-reducing valves and thermostatically controlled valves; and / or: Manufacture from materials of any subheading, except that of the product; or manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product.
Source: European Commission, Access2Markets (CC BY 4.0, shortened). The text of the agreement prevails. Access2Markets
Legal and explanatory notes for 8481800000
Notes to chapter 84
Notes 1. This chapter does not cover: (a) millstones, grindstones or other articles of Chapter 68; (b) machinery or appliances (for example, pumps) of ceramic material and ceramic parts of machinery or appliances of any material (Chapter 69); (c) laboratory glassware (heading 7017); machinery, appliances or other articles for technical uses or parts thereof, of glass (heading 7019 or 7020); (d) articles of heading 7321 or 7322 or similar articles of other base metals (Chapters 74 to 76 or 78 to 81); (e) vacuum cleaners of heading 8508; (f) electromechanical domestic appliances of heading 8509; digital cameras of heading 8525; (g) radiators for the articles of Section XVII; or (h) hand-operated mechanical floor sweepers, not motorised (heading 9603). 2. Subject to the operation of note 3 to Section XVI and subject to note 11 to this chapter, a machine or appliance which answers to a description in one or more of the headings 8401 to 8424, or heading 8486 and at the same time to a description in one or more of the headings 8425 to 8480 is to be classified under the appropriate heading of the former group or under heading 8486, as the case may be, and not the latter group. (A) Heading 8419 does not, however, cover: (a) germination plant, incubators or brooders (heading 8436); (b) grain dampening machines (heading 8437); (c) diffusing apparatus for sugar juice extraction (heading 8438); (d) machinery for the heat-treatment of textile yarns, fabrics or made up textile articles (heading 8451); or (e) machinery, plant or laboratory equipment, designed for a mechanical operation, in which a change of temperature, even if necessary, is subsidiary. (B) Heading 8422 does not cover: (a) sewing machines for closing bags or similar containers (heading 8452); or (b) office machinery of heading 8472. (C) Heading 8424 does not cover: (a) ink-jet printing machines (heading 8443); or (b) water-jet cutting machines (heading 8456). 3. A machine tool for working any material which answers to a description in heading 8456 and at the same time to a description in heading 8457, 8458, 8459, 8460, 8461, 8464 or 8465 is to be classified in heading 8456. 4. Heading 8457 applies only to machine tools for working metal, other than lathes (including turning centres), which can carry out different types of machining operations either: (a) by automatic tool change from a magazine or the like in conformity with a machining programme (machining centres); (b) by the automatic use, simultaneously or sequentially, of different unit heads working on a fixed position workpiece (unit construction machines, single station); or (c) by the automatic transfer of the workpiece to different unit heads (multi-station transfer machines). 5. For the purposes of heading 8462, a ‘slitting line’ for flat products is a processing line composed of an uncoiler, a coil flattener, a slitter and a recoiler. A ‘cut-to-length line’ for flat products is a processing line composed of an uncoiler, a coil flattener, and a shear. 6. (A) For the purposes of heading 8471, the expression ‘automatic data-processing machines’ means machines, capable of (1) storing the processing program or programs and at least the data immediately necessary for the execution of the program; (2) being freely programmed in accordance with the requirements of the user; (3) performing arithmetical computations specified by the user; and (4) executing, without human intervention, a processing program which requires them to modify their execution, by logical decision during the processing run. (B) Automatic data-processing machines may be in the form of systems consisting of a variable number of separate units. (C) Subject to paragraph (D) and (E) below, a unit is to be regarded as being a part of an automatic data-processing system if it meets all of the following conditions: (1) it is of a kind solely or principally used in an automatic data-processing system; (2) it is connectable to the central processing unit either directly or through one or more other units; and (3) it is able to accept or deliver data in a form (codes or signals) which can be used by the system. Separately presented units of an automatic data-processing machine are to be classified in heading 8471. However keyboards, X-Y coordinate input devices and disk storage units which satisfy the conditions of paragraphs (C)(2) and (C)(3) above, are in all cases to be classified as units of heading 8471. (D) Heading 8471 does not cover the following when presented separately, even if they meet all of the conditions set forth in note 6(C) above: (1) printers, copying machines, facsimile machines, whether or not combined; (2) apparatus for the transmission or reception of voice, images or other data, including apparatus for communication in a wired or wireless network (such as a local or wide area network); (3) loudspeakers and microphones; (4) television cameras, digital cameras and video camera recorders; (5) monitors and projectors, not incorporating television reception apparatus. (E) Machines incorporating or working in conjunction with an automatic data-processing machine and performing a specific function other than data processing are to be classified in the headings appropriate to their respective functions or, failing that, in residual headings. 7. Heading 8482 applies, inter alia, to polished steel balls, the maximum and minimum diameters of which do not differ from the nominal diameter by more than 1 % or by more than 0,05 mm, whichever is less. Other steel balls are to be classified in heading 7326. 8. A machine which is used for more than one purpose is, for the purposes of classification, to be treated as if its principal purpose were its sole purpose. Subject to note 2 to this chapter and note 3 to Section XVI, a machine the principal purpose of which is not described in any heading or for which no one purpose is the principal purpose is, unless the context otherwise requires, to be classified in heading 8479. Heading 8479 also covers machines for making rope or cable (for example, stranding, twisting or cabling machines) from metal wire, textile yarn or any other material or from a combination of such materials. 9. For the purposes of heading 8470, the term ‘pocket-size’ applies only to machines the dimensions of which do not exceed 170 mm × 100 mm × 45 mm. 10. For the purposes of heading 8485, the expression ‘additive manufacturing’ (also referred to as 3D printing) means the formation of physical objects, based on a digital model, by the successive addition and layering, and consolidation and solidification, of material (for example, metal, plastics or ceramics). Subject to note 1 to Section XVI and note 1 to Chapter 84, machines answering to the description in heading 8485 are to be classified in that heading and in no other heading of the nomenclature. 11. (A) Notes 12(a) and 12(b) to Chapter 85 also apply with respect to the expressions ‘semiconductor devices’ and ‘electronic integrated circuits’, respectively, as used in this note and in heading 8486. However, for the purposes of this note and of heading 8486, the expression ‘semiconductor devices’ also covers photosensitive semiconductor devices and light-emitting diodes (LED). (B) For the purposes of this note and of heading 8486, the expression ‘manufacture of flat panel displays’ covers the fabrication of substrates into a flat panel. It does not cover the manufacture of glass or the assembly of printed circuit boards or other electronic components onto the flat panel. The expression ‘flat panel display’ does not cover cathode-ray tube technology. (C) Heading 8486 also includes machines and apparatus solely or principally of a kind used for: (1) the manufacture or repair of masks and reticles; (2) assembling semiconductor devices or electronic integrated circuits; (3) lifting, handling, loading or unloading of boules, wafers, semiconductor devices, electronic integrated circuits and flat panel displays. (D) Subject to note 1 to Section XVI and note 1 to Chapter 84, machines and apparatus answering to the description in heading 8486 are to be classified in that heading and in no other heading of the nomenclature. Subheading notes 1. For the purposes of subheading 8465 20, the term ‘machining centres’ applies only to machine-tools for working wood, cork, bone, hard rubber, hard plastics or similar hard materials, which can carry out different types of machining operations by automatic tool change from a magazine or the like in conformity with a machining programme. 2. For the purposes of subheading 8471 49, the term ‘systems’ means automatic data-processing machines whose units satisfy the conditions laid down in note 6(C) to Chapter 84 and which comprise at least a central processing unit, one input unit (for example, a keyboard or a scanner), and one output unit (for example, a visual display unit or a printer). 3. For the purposes of subheading 8481 20, the expression ‘valves for oleohydraulic or pneumatic transmissions’ means valves which are used specifically in the transmission of ‘fluid power’ in a hydraulic or pneumatic system, where the energy source is supplied in the form of pressurized fluids (liquid or gas). These valves may be of any type (for example, pressure-reducing type, check type). Subheading 8481 20 takes precedence over all other subheadings of heading 8481. 4. Subheading 8482 40 applies only to bearings with cylindrical rollers of a uniform diameter not exceeding 5 mm and having a length which is at least three times the diameter. The ends of the rollers may be rounded. Additional notes 1. For the purposes of subheadings 8407 10 and 8409 10, the expression ‘aircraft engines’ shall apply only to engines designed for fitting with an airscrew or rotor. 2. Subheading 8471 70 30 shall also apply to CD-ROM drives, being storage units for automatic data-processing machines, which consist of drive units designed for retrieving the signals from CD-ROMs, audio CDs and photo CDs and equipped with a jack for earphones, a volume-control button or a start/stop button.
Notes to section XVI
MACHINERY AND MECHANICAL APPLIANCES; ELECTRICAL EQUIPMENT; PARTS THEREOF; SOUND RECORDERS AND REPRODUCERS, TELEVISION IMAGE AND SOUND RECORDERS AND REPRODUCERS, AND PARTS AND ACCESSORIES OF SUCH ARTICLES Notes 1. This section does not cover: (a) transmission or conveyor belts or belting, of plastics of Chapter 39, or of vulcanised rubber (heading 4010), or other articles of a kind used in machinery or mechanical or electrical appliances or for other technical uses, of vulcanised rubber other than hard rubber (heading 4016); (b) articles of leather or of composition leather (heading 4205) or of furskin (heading 4303), of a kind used in machinery or mechanical appliances or for other technical uses; (c) bobbins, spools, cops, cones, cores, reels or similar supports, of any material (for example, Chapter 39, 40, 44 or 48 or Section XV); (d) perforated cards for jacquard or similar machines (for example, Chapter 39 or 48 or Section XV); (e) transmission or conveyor belts or belting, of textile material (heading 5910) or other articles of textile material for technical uses (heading 5911); (f) precious or semi-precious stones (natural, synthetic or reconstructed) of headings 7102 to 7104, or articles wholly of such stones of heading 7116, except unmounted worked sapphires and diamonds for styli (heading 8522); (g) parts of general use, as defined in note 2 to Section XV, of base metal (Section XV), or similar goods of plastics (Chapter 39); (h) drill pipe (heading 7304); (ij) endless belts of metal wire or strip (Section XV); (k) articles of Chapter 82 or 83; (l) articles of Section XVII; (m) articles of Chapter 90; (n) clocks, watches or other articles of Chapter 91; (o) interchangeable tools of heading 8207 or brushes of a kind used as parts of machines (heading 9603); similar interchangeable tools are to be classified according to the constituent material of their working part (for example, in Chapter 40, 42, 43, 45 or 59 or heading 6804 or 6909); (p) articles of Chapter 95; or (q) typewriter or similar ribbons, whether or not on spools or in cartridges (classified according to their constituent material, or in heading 9612 if inked or otherwise prepared for giving impressions), or monopods, bipods, tripods and similar articles, of heading 9620. 2. Subject to note 1 to this section, note 1 to Chapter 84 and note 1 to Chapter 85, parts of machines (not being parts of the articles of heading 8484, 8544, 8545, 8546 or 8547) are to be classified according to the following rules: (a) Parts which are goods included in any of the headings of Chapter 84 or 85 (other than headings 8409, 8431, 8448, 8466, 8473, 8487, 8503, 8522, 8529, 8538 and 8548) are in all cases to be classified in their respective headings. (b) Other parts, if suitable for use solely or principally with a particular kind of machine, or with a number of machines of the same heading (including a machine of heading 8479 or 8543) are to be classified with the machines of that kind or in heading 8409, 8431, 8448, 8466, 8473, 8503, 8522, 8529 or 8538 as appropriate. However, parts which are equally suitable for use principally with the goods of headings 8517 and 8525 to 8528 are to be classified in heading 8517, and parts which are suitable for use solely or principally with the goods of heading 8524 are to be classified in heading 8529; (c) All other parts are to be classified in heading 8409, 8431, 8448, 8466, 8473, 8503, 8522, 8529 or 8538 as appropriate or, failing that, in heading 8487 or 8548. 3. Unless the context otherwise requires, composite machines consisting of two or more machines fitted together to form a whole and other machines designed for the purpose of performing two or more complementary or alternative functions are to be classified as if consisting only of that component or as being that machine which performs the principal function. 4. Where a machine (including a combination of machines) consists of individual components (whether separate or interconnected by piping, by transmission devices, by electric cables or by other devices) intended to contribute together to a clearly defined function covered by one of the headings in Chapter 84 or 85, then the whole falls to be classified in the heading appropriate to that function. 5. For the purposes of these notes, the expression ‘machine’ means any machine, machinery, plant, equipment, apparatus or appliance cited in the headings of Chapter 84 or 85. 6. (A) Throughout the nomenclature, the expression ‘electrical and electronic waste and scrap’ means electrical and electronic assemblies, printed circuit boards, and electrical or electronic articles that: (a) have been rendered unusable for their original purposes by breakage, cutting-up or other processes or are economically unsuitable for repair, refurbishment or renovation to render them fit for their original purposes; and (b) are packaged or shipped in a manner not intended to protect individual articles from damage during transportation, loading and unloading operations. (B) Mixed consignments of ‘electrical and electronic waste and scrap’ and other waste and scrap are to be classified in heading 8549. (C) This section does not cover municipal waste, as defined in note 4 to Chapter 38. Additional notes 1. Tools necessary for the assembly or maintenance of machines are to be classified with those machines if imported with them. Interchangeable tools imported with machines are also to be classified therewith if they form part of the normal equipment of the machines and are normally sold with them. 2. Should the customs so require, the declarant shall produce, in support of his declaration, an illustrated document (for example, instructions, prospectus, a page from a catalogue, a photograph) giving the normal description of the machine, its uses and essential characteristics and, in respect of an unassembled or disassembled machine, an assembly plan and a list of the contents of the various packages. 3. The provisions of general rule 2(a) are also applicable, at the request of the declarant and subject to conditions stipulated by the competent authorities, to machines imported in split consignments.
Sources: Combined Nomenclature 2026, Annex I to Regulation (EEC) No 2658/87 (CELEX 32025R1926), and the Explanatory Notes to the Combined Nomenclature (CELEX 02019XC0329(02)-20260213). The section and chapter notes are legally binding; the explanatory notes are guidance. EUR-Lex
EU classification regulations for 8481800000
Commission regulations that classified specific goods under this code. They bind customs in every member state for identical goods.
- 8481 80 99 Oct 3, 2018 · Regulation on EUR-Lex
An article of plastics in the form of a set put up for retail sale consisting of:
— three garden hose couplings, — a spray nozzle with a mechanism for the adjustment of the water jet type as well as for closing or opening the flow, — connectors equipped with rubber seals (so called ‘O-rings’). The article is presented to be used in gardens to sprinkle and water the plants. See images (*1).
Reasons
Classification is determined by general rules 1, 3(b) and 6 for the interpretation of the Combined Nomenclature, and by the wording of CN codes 8481 , 8481 80 and 8481 80 99 . The spray nozzle, which changes the water jet type and regulates the liquid flow, gives the set its essential character. The article is neither an irrigation system (see also the Harmonised System Explanatory Notes (HSEN) to heading 8424 , (E)), nor a mechanical garden sprinkler head. It has the objective characteristics of a hose pipe nozzle fitted with taps, cocks, valves or other appliances for regulating the liquid flow and the jet type, which is excluded from heading 8424 (see also the HSEN to heading 8424 (D)). Hose pipe nozzles and the like, fitted with cocks or with valves for forming a jet or a spray are classified in heading 8481 (see also the HSEN to heading 8481 , point (11). Consequently, classification under heading 8424 is excluded. The article is therefore to be classified in CN code 8481 80 99 as other valves.
UK advance tariff rulings for 8481800000
Rulings of HM Revenue & Customs for goods with UK commodity codes that start like this EU code. The UK tariff differs from the EU tariff, so these rulings are guidance for the EU.
- UK 8481803900 Valid May 23, 2025 to May 22, 2028 · Ruling 600012758 on GOV.UK
A diverter valve has been designed to control the flow of water in small bore domestic central heating systems where both radiator and hot water cylinder circulation are pumped. It is typically suited for systems up to 90,000 Btu/h (26 KW). This diverter valve is a central heating radiator valve, but it is not a thermostatic valve. The specifications of this diverter valve are: voltage 230-240V ~ 50 Hz, a power consumption of 6W, lead supplied of 1 meter, 3 core, an operating temperature range +5 to +88° C, a maximum ambient air temperature +52° C, and pipe fitting sizes 22 mm and 28 mm.
Justification
Classification has been determined in accordance with the following: - General Interpretative Rules (GIR)s: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - Has been used to classify this product by the terms of heading 8481 - Taps, cocks, valves and similar appliances for pipes, boiler shells, tanks, vats or the like, including pressure-reducing valves and thermostatically controlled valves GIR 6 - Has been used to classify the goods to subheading level 848180 - Other appliances 8 Digit code 84818039 - Central heating radiator valves; Other than thermostatic valves Also classified in accordance with: Note 2 (a) to Section XVI Harmonised System Explanatory Notes (HSENs) to Heading 8481
- UK 8481803900 Valid May 23, 2025 to May 22, 2028 · Ruling 600012759 on GOV.UK
The product data states that this a balanced hydronic valve with flat mount body that are used in domestic and small commercial boiler/boiler manifold applications to control the flow of hot and/or cold water. The valve consists of an actuator, valve body (made of Ryton material) and cartridge assembly. The valve itself is a central heating radiator valve. It only directs the flow of water, it does not decide the temperature of the flow, and it is not temperature regulating. The body is brass, the motor housing cover is plastic. The 3-way flange mounting plastic valve is designed for either diverting or mixing valve applications in central heating and/or cooling systems. It can be used as a 2-way valve by blocking either Port A or Port B. Depending on the model selected, they can be controlled by a low or line voltage SPST or SPDT controller, such as a room thermostat, aqua stat or flow switch. This VC series of hydronic valves are designed to provide sinusoidal valve actuator travel, and therefore operate silently and resist water hammer. Through an internal switching mechanism, the actuator takes power only while driving the valve to the commanded position. The actuator head is removable without affecting the integrity of the water system. All actuator models are interchangeable with any VC valve body, offering flexibility for production line assembly and maintenance. The valve piston construction allows for port sealing that is independent of the differential pressure across the valve.
Justification
Classification has been determined in accordance with the following: - General Interpretative Rules (GIR)s: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - Has been used to classify this product by the terms of heading 8481 - Taps, cocks, valves and similar appliances for pipes, boiler shells, tanks, vats or the like, including pressure-reducing valves and thermostatically controlled valves GIR 6 - Has been used to classify the goods to subheading level 848180 - Other appliances 8 Digit code 84818039 - Central heating radiator valves; Other than thermostatic valves Also classified in accordance with: Note 2 (a) to Section XVI Harmonised system explanatory notes (HSENs) to Heading 8481
- UK 8481805100 Valid May 22, 2024 to May 21, 2027 · Ruling 600010506 on GOV.UK
This product is a valve body made of ductile iron, this part will end up in an electric or pneumatic valve. The valves provide a high degree of accuracy and repeatability for accurate temperature control and are equally accurate in mixing or diverting service over a wide flow range. G valves are 3-way control valves consisting of a heavy duty rotary valve and either a quarter turn electric or pneumatic actuator. There are two main types of mode of operation: 90° rotor that allows either ports 1 or 3 to be selected as the common port; and 180° rotor that requires port 2 to be the common port. The valve is lightweight and compact, has a low pressure drop that enables savings on either valve or pump size and high accuracy that provides better temperature control.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify the product to heading 8481 - Taps, cocks, valves and similar appliances for pipes, boiler shells, tanks, vats or the like, including pressure-reducing valves and thermostatically controlled valves GIR 6 has been used to classify the goods to subheading level 848180 – Other appliances Eight digit code 84818051 – Other; Process control valves; Temperature regulators Also classified in accordance with: Harmonised System Explanatory Notes (HSENs) Note 12 to heading 8481
+ 8 more
- UK 8481805990 Valid Mar 4, 2024 to Mar 3, 2027 · Ruling 600009646 on GOV.UK
The product is a manifold with ball valves and an automatic air vent. The plastic modular distributor is made of a glass fibre reinforced polyamide 6.6, which makes the distributor, in combination with a pump unit, suitable for all temperatures. The modules are double-walled to cool with the distributor without insulating the unit. The distributor beam is equipped with adjustable flow meters to regulate the volume flows over the groups. The collection bar is equipped with integrated thermostatic valves M30x 1.5 to control with room thermostats. It is equipped with 2 ball valves, 1 thermo-barometer, 1 thermometer, 2 automatic air vents and 2 filling/draining valves. It is made of brass with chrome finish with plastic components, the weight is 4.3kg - 14.3kg. Packaged in a box: smallest- 50 x 60 x 210cm, weight 5.5kg Packaged in a box: largest- 140 x 60 x 210cm, weight 15.5kg
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 8481: Taps, cocks, valves and similar appliances for pipes, boiler shells, tanks, vats or the like, including pressure-reducing valves and thermostatically controlled valves. GIR 5 (b) has been used to identify the type of packaging: smallest box: 50 x 60 x 210cm / largest box: 140 x 60 x 210cm. GIR 6 has been used to classify the goods to subheading 848180: Other appliances. 8 Digit Code: 84818059: Other than elsewhere specified; Process control valves; Other than temperature regulators. 10 Digit Code 8481805990: Other than elsewhere specified. …
- UK 8481808190 Valid Jul 22, 2024 to Jul 21, 2027 · Ruling 600010607 on GOV.UK
Pressure activated valve, female luer lock inlet , tube filament outlet - HBVAL002A. This is a component used in the assembly for anaesthesia tube sets for the medical industry. When in operation the spring and upstream pressure apply opposing forces on the valve. When the force of the upstream pressure exerts a greater force than the spring force, then the poppet moves away from the valve seat which allows fluid to pass through the outlet port. The valve is made from thermoplastic Polymer Makrolon® Rx1805. It is packaged in bulk using a double polybag and corrugated box carton. The polybag has a minimum thickness of 1.5mil and is closed to prevent contamination. Approximately 1500 valves are packaged per double polybag and approximately 3000 per corrugated box carton. The product is palletised with shrink wrap.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading 8481 - Taps, cocks, valves and similar appliances for pipes, boiler shells, tanks, vats or the like, including pressure-reducing valves and thermostatically controlled valves GIR 5 (b) - has been used to identify the type of packaging. Polybag and corrugated box carton, palletised with shrink wrap GIR 6 has been used to classify this product to subheading level 848180 - Other appliances, other than elsewhere specified 8 Digit Code 84818081 - Ball and plug valves 10 digit code 848190 - Other than for use in certain types of aircraft Also …
- UK 8481809990 Valid Jun 11, 2025 to Jun 10, 2028 · Ruling 600012763 on GOV.UK
A 1/2 inch Gas Valve. The gas valve is a device used to control the flow of gas to the burner. A signal is sent from the printed circuit board which opens the gas valve and allows the gas to flow through the valve and into the burner or pilot assembly depending on the model of appliance being used . Maximum operating pressure 30mbar. These are hydronic zone valves made of brass. Based on the information received this valve is not a pressure reducing or control valve. It is also not a temperature regulator, central heating valve. It does not operate by motor or fluid, and is not a type of gate, globe, ball, plug, butterfly or diaphragm valve.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) GIR 1 has been used to classify this product by the terms of heading 8481 - Taps, cocks, valves and similar appliances for pipes, boiler shells, tanks, vats or the like, including pressure-reducing valves and thermostatically controlled valves GIR 6 - has been used to classify the goods to subheading level 848180 - Other appliances 8 Digit Code 84818099 - Other than elsewhere specified within this subheading 10 Digit Code - 8481809990 - Other than elsewhere specified within this subheading Also classified in accordance with: Note 2(a) to Section XVI Harmonised System Explanatory Notes (HSEN)s to Heading 8481
- UK 8481809990 Valid Jun 11, 2025 to Jun 10, 2028 · Ruling 600012764 on GOV.UK
A Gas Valve used to control the flow of gas to the burner. A signal is sent from the printed circuit board which opens the gas valve and allows the gas to flow through the valve and into the burner or pilot assembly depending on the model of appliance being used . Maximum operating pressure 45mbar. These are hydronic zone valves made of brass. Based on the information received this valve is not a pressure reducing or control valve. It is also not a temperature regulator, central heating valve. It does not operate by motor or fluid, and is not a type of gate, globe, ball, plug, butterfly or diaphragm valve.
Justification
Classification has been determined in accordance with the following: - General Interpretative Rules (GIR)s: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - has been used to classify this product by the terms of heading 8481 - Taps, cocks, valves and similar appliances for pipes, boiler shells, tanks, vats or the like, including pressure-reducing valves and thermostatically controlled valves. GIR 6 - has been used to classify the goods to subheading level 848180 - Other appliances 8 Digit Code 84818099 - Other than elsewhere specified within this subheading 10 Digit Code - 8481809990 - Other than elsewhere specified within this subheading Also classified in accordance with: Note 2(a) to Section XVI Harmonised System Explanatory Notes (HSEN)s to Heading 8481
- UK 8481809990 Valid Jun 11, 2025 to Jun 10, 2028 · Ruling 600012765 on GOV.UK
A Gas Valve used to control the flow of gas to the burner. When the need for gas in the burner increases, a signal is sent from the printed circuit board which opens the gas valve and allows the gas to flow through the valve and into the burner or pilot assembly depending on the model of appliance being used . Maximum operating pressure 60mbar. These are hydronic zone valves made of brass. Based on the information received this valve is not a pressure reducing or control valve. It is also not a temperature regulator, central heating valve. It does not operate by motor or fluid, and is not a type of gate, globe, ball, plug, butterfly or diaphragm valve.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) GIR 1 has been used to classify this product by the terms of heading 8481 - Taps, cocks, valves and similar appliances for pipes, boiler shells, tanks, vats or the like, including pressure-reducing valves and thermostatically controlled valves GIR 6 - has been used to classify the goods to subheading level 848180 - Other appliances 8 Digit Code - 84818099 - Other than elsewhere specified within this subheading 10 Digit Code 8481809990 - Other than elsewhere specified within this subheading Also classified in accordance with: Note 2(a) to Section XVI Harmonised System Explanatory Notes (HSEN)s to Heading 8481
- UK 8481809990 Valid Jul 2, 2025 to Jul 1, 2028 · Ruling 600012766 on GOV.UK
A Compact Auto Gas Control is typically a valve designed for controlling the flow of gas in appliances like boilers, furnaces, and water heaters. These valves are often used to manage the gas supply for lighting and supervising the main burner. They can be automatic, meaning they control gas flow based on pre-set parameters or signals. It is a valve just with additional safety features. It is used in a system context in conjunction with either a direct spark ignition (DSI), intermittent pilot (IP) or Hot Surface Ignition control module and associated devices to provide programmed safe light-up and supervision of the main burner of an appliance. It has an electric on off operator and a second electric on off valve. The combination gas controls perform all the functions required to safely regulate gas flow to the pilot burner and the main burner of domestic central heating equipment, warm air furnaces, back boilers and water heaters. Combination gas controls comprise a standard body to which a range of sub-assemblies are factory fitted to give various system options. This makes boiler system design much easier as technical specifications and unit dimensions are the same for all system options. Options include servo pressure regulation, throttle valve,(switchable) softlite, electrical high-low control and electrical or mechanical modulation for the complete range of control applications. The gas controls are available in line or low voltage versions. The handbook states Compact Automatic combination gas control consist of a first direct electric on/off operator for opening the safety valve of class A or class B according to EN 161 and a second electric on/off servo operator valve for opening the main valve of class B, C or class J according to EN 161.
Justification
Classification has been determined in accordance with the following: - General Interpretative Rules (GIR)s: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - has been used to classify this product by the terms of heading 8481 - Taps, cocks, valves and similar appliances for pipes, boiler shells, tanks, vats or the like, including pressure-reducing valves and thermostatically controlled valves GIR 3 (b) has been used as the second electric on off valve is considered to be the essential character. GIR 6 - has been used to classify the goods to subheading level 848180 - Other appliances 8 Digit Code 84818099 - Other than elsewhere specified within this sub heading 10 Digit Code 8481809990 - Other than elsewhere specified within this sub heading Also classified in …
- UK 8481809990 Valid Jan 23, 2026 to Jan 22, 2029 · Ruling 600014607 on GOV.UK
The product is a cart, hose, reel, and spray gun set which is made plastic (Polyvinyl Chloride (PVC)) and steel. The cart has a height-adjustable handle and is green in colour. The spray gun has five different settings, from light mist to a jet spray for cars or windows. The spray gun allows the flow to be controlled by thumb. The hosepipe is 40m, comes with three hose end connectors, one tap connector 12.5/19/25mm and 1 hose end aqua stop connector. The cart is on wheels. Weight is 9.67kg.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - Has been used to classify this product by the terms of heading 8481 - Taps, cocks, valves and similar appliances for pipes, boiler shells, tanks, vats or the like, including pressure-reducing valves and thermostatically controlled valves. GIR 3B - Has been used as the Hose spray nozzle is considered to be the essential character. GIR 6 - Has been used to classify this product by the terms of heading 8481 80 - Other Appliances. 8 - Digit Code 848180 99 - Other than elsewhere specified; Other than process control valves; Other than Gate Valves, Globe Valves, Ball and Plug Valves, Butterfly Valves and Diaphragm Valves. 10 - Digit Code 84818099 90 - …
- UK 8481809990 Valid Sep 17, 2026 to Sep 16, 2029 · Ruling 600016009 on GOV.UK
A stainless steel marine air pipe head for fitting to ballast or fuel tanks on ships. The product is forged in a foundry and then machined. It incorporates an automatic closure mechanism which allows normal tank venting but closes to prevent seawater from entering the tank. Packaged - it will be sent on a wooden pallet in a box
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General Interpretative Rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 8481 - Taps, cocks, valves and similar appliances for pipes, boiler shells, tanks, vats or the like, including pressure-reducing valves and thermostatically controlled valves GIR 5 (b) has been used to identify the type of packaging. GIR 6 - has been used to classify the goods to subheading level 848180 - Other appliances 8 Digit Code - 84818099 - Other than elsewhere specified within this subheading 10 Digit Code 8481809990 - Other than elsewhere specified within this subheading Also classified in accordance with: Chapter 90 Note 1 (g) Harmonized System …
Source: HM Revenue & Customs, Advance Tariff Rulings. Contains public sector information licensed under the Open Government Licence v3.0.
Restrictions and flags for 848180
- Russia sanctions: import ban Regulation (EU) No 833/2014, Annex XXI 8481
Art. 3i, goods generating significant revenue for Russia
Read the act on EUR-Lex - Russia sanctions: export ban Regulation (EU) No 833/2014, Annex XXIII 8481
Art. 3k, goods contributing to Russian industrial capacity
Read the act on EUR-Lex - Dual-use goods Regulation (EU) 2021/821, Annex I 84818011
Covers only part of the goods under this code (act names 84818011).
May be dual-use; check the Annex I entry 0B001b (correlation table is non-binding)
Read the act on EUR-Lex - Dual-use goods Regulation (EU) 2021/821, Annex I 84818019
Covers only part of the goods under this code (act names 84818019).
May be dual-use; check the Annex I entry 0B001b (correlation table is non-binding)
Read the act on EUR-Lex - Dual-use goods Regulation (EU) 2021/821, Annex I 84818031
Covers only part of the goods under this code (act names 84818031).
May be dual-use; check the Annex I entry 0B001b (correlation table is non-binding)
Read the act on EUR-Lex - Dual-use goods Regulation (EU) 2021/821, Annex I 84818039
Covers only part of the goods under this code (act names 84818039).
May be dual-use; check the Annex I entry 0B001b (correlation table is non-binding)
Read the act on EUR-Lex - Dual-use goods Regulation (EU) 2021/821, Annex I 84818051
Covers only part of the goods under this code (act names 84818051).
May be dual-use; check the Annex I entry 2A226, 0B001b, 2B350g (correlation table is non-binding)
Read the act on EUR-Lex - Dual-use goods Regulation (EU) 2021/821, Annex I 84818059
Covers only part of the goods under this code (act names 84818059).
May be dual-use; check the Annex I entry 0B001c, 0B001d, 2A226, 0B001b, 2B350g (correlation table is non-binding)
Read the act on EUR-Lex - Dual-use goods Regulation (EU) 2021/821, Annex I 84818061
Covers only part of the goods under this code (act names 84818061).
May be dual-use; check the Annex I entry 0B001b, 2B350g (correlation table is non-binding)
Read the act on EUR-Lex - Dual-use goods Regulation (EU) 2021/821, Annex I 84818063
Covers only part of the goods under this code (act names 84818063).
May be dual-use; check the Annex I entry 0B001b, 2B350g (correlation table is non-binding)
Read the act on EUR-Lex - Dual-use goods Regulation (EU) 2021/821, Annex I 84818069
Covers only part of the goods under this code (act names 84818069).
May be dual-use; check the Annex I entry 0B001c, 0B001d, 0B001h, 2A226, 0B001b, 0B001e, 0B001f, 0B001j, 2B350g (correlation table is non-binding)
Read the act on EUR-Lex - Dual-use goods Regulation (EU) 2021/821, Annex I 84818071
Covers only part of the goods under this code (act names 84818071).
May be dual-use; check the Annex I entry 0B001b, 2B350g (correlation table is non-binding)
Read the act on EUR-Lex - Dual-use goods Regulation (EU) 2021/821, Annex I 84818073
Covers only part of the goods under this code (act names 84818073).
May be dual-use; check the Annex I entry 7A116, 0B001b, 2B350g, 9A106d (correlation table is non-binding)
Read the act on EUR-Lex - Dual-use goods Regulation (EU) 2021/821, Annex I 84818079
Covers only part of the goods under this code (act names 84818079).
May be dual-use; check the Annex I entry 2A226, 7A116, 0B001b, 2B350g, 9A106d (correlation table is non-binding)
Read the act on EUR-Lex - Dual-use goods Regulation (EU) 2021/821, Annex I 84818081
Covers only part of the goods under this code (act names 84818081).
May be dual-use; check the Annex I entry 0B001b, 2B350g (correlation table is non-binding)
Read the act on EUR-Lex - Dual-use goods Regulation (EU) 2021/821, Annex I 84818085
Covers only part of the goods under this code (act names 84818085).
May be dual-use; check the Annex I entry 0B001b, 2B350g (correlation table is non-binding)
Read the act on EUR-Lex - Dual-use goods Regulation (EU) 2021/821, Annex I 84818087
Covers only part of the goods under this code (act names 84818087).
May be dual-use; check the Annex I entry 0B001c, 0B001d, 0B001b, 2B350g (correlation table is non-binding)
Read the act on EUR-Lex - Dual-use goods Regulation (EU) 2021/821, Annex I 84818099
Covers only part of the goods under this code (act names 84818099).
May be dual-use; check the Annex I entry 0B001b, 2B350g (correlation table is non-binding)
Read the act on EUR-Lex
For orientation only. Check the act before you rely on a flag; thresholds, derogations and exceptions are not shown in full. The dual-use table links codes to control list entries and is non-binding.
EU trade in 2025 for 848180
- Extra-EU imports
- €6.2B
- 336,620 t
- Extra-EU exports
- €12.6B
Top origin countries by import value
China €2.8B
United States €1.2B
United Kingdom €413.6M
Switzerland €370.1M
Japan €175.7M
CN8 codes below this code: 17. Source: Eurostat, Comext, CC BY 4.0, processed by hscode.info. Confidential trade is not allocated to codes.
Tariff changes for 848180 since 2016
- Jan 2026 8481807940 Code added
- Jul 2025 8481805980 Code added
- Jan 2025 3 codes Code removed
- Jan 2025 8481809980 Code added
- Jan 2021 8481805970 Code added
- Jan 2020 8481808540 Code removed
- Jul 2019 2 codes Code added
- Jan 2019 8481807920 Code removed
- Jan 2019 2 codes Code added
- Jul 2018 4 codes Code added
- Jan 2018 8481808540 Code added
- Jul 2017 8481805920 Code added
1 earlier changes. Month-by-month comparison of the European Commission’s TARIC extractions. Seasonal entry prices left out.
UK import duty for 848180
- 2%
Third-country duties of all UK commodity codes under this HS subheading. Source: UK Department for Business and Trade, as of Nov 2, 2026. The UK tariff differs from the EU tariff.
Import VAT in the EU
- Austria 20 %
- Belgium 21 %
- Bulgaria 20 %
- Croatia 25 %
- Cyprus 19 % maybe 3 %, 5 %
- Czechia 21 %
- Denmark 25 %
- Estonia 24 %
- Finland 25.5 %
- France 20 %
- Germany 19 %
- Greece 24 %
- Hungary 27 %
- Ireland 23 %
- Italy 22 %
- Latvia 21 %
- Lithuania 21 %
- Luxembourg 17 %
- Malta 18 %
- Netherlands 21 %
- Poland 23 %
- Portugal 23 %
- Romania 21 %
- Slovakia 23 %
- Slovenia 22 %
- Spain 21 %
- Sweden 25 %
Standard rate per member state, on the customs value, the duty and transport to the destination. Reduced rates often depend on the use or the buyer and apply only where the country provides them for these goods. Source: European Commission, Taxes in Europe Database, as of Nov 2, 2026.
Rules of origin
Preferential rules of origin for subheading 848180 depend on the trade agreement. The Commission publishes them in Access2Markets.
Rules of origin on Access2MarketsInformation
When importing or exporting "Other appliances", it is crucial to have the correct HS code or TARIC code. The HS code 8481800000 80 serves as the standard code for this product, ensuring that the appropriate duties and taxes are applied when crossing international borders.
To ensure your business transactions run smoothly when importing or exporting "Other appliances", consider the following points:
- Inform yourself about the specific import and export regulations in the countries involved. This includes possible restrictions, taxes, and duties applicable to "Other appliances".
- Check if any additional licenses, permits, or certificates are required to import "Other appliances" into the destination country or export it from the country of origin.
- Make sure your trading partners have valid identification numbers, such as EORI numbers (Economic Operators Registration and Identification) in the EU, to streamline trade and minimize delays.
- Ensure that all trade- and customs-related documents (such as commercial invoices, packing lists, certificates of origin, and insurance policies) are accurately completed and adhere to the respective national regulations.
- Keep an eye on the current exchange rates, as well as packaging, shipping, and insurance costs, to accurately calculate trade costs.
In summary, the HS code or TARIC code for "Other appliances" is 8481800000 80. Make sure you accurately use this code in all your trade and customs documents to guarantee smooth and hassle-free transactions. With these tips, you'll be better prepared for the challenges of international trade and can successfully import and export "Other appliances".
HS Code structure
1. Chapter
There are 21 different sections, which are divided into 96 chapters. Exceptional chapters include chapter 77, which is reserved for future use, chapters 98 and 99, which are limited at national level, and chapter 99, which is a specific code for temporary changes. In the example above, chapter 84 was selected for nuclear reactors, boilers, machinery and mechanical appliances; parts thereof
2. Heading
The heading determines the specific category within a certain chapter. In the example above, the 81 refers to Taps, cocks, valves and similar appliances for pipes, boiler shells, tanks, vats or the like, including pressure-reducing valves and thermostatically controlled valves.
3. Subheading
The last two digits of the international harmonized code are more specific and define subcategories of products. In the example above, the 80 refers to Other appliances.
HS Code tree structure
8400000000 80
Chapter NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF
8481000000 80
Taps, cocks, valves and similar appliances for pipes, boiler shells, tanks, vats or the like, including pressure-reducing valves and thermostatically controlled valves
8481100000 80
- Pressure-reducing valves
8481100500 80
- - Combined with filters or lubricators
8481100510 80
- - - For use in certain types of aircraft
8481100590 80
- - - Other
8481101900 10
- - Other
8481101900 80
- - - Of cast iron or of steel
8481101910 80
- - - - For use in certain types of aircraft
8481101990 80
- - - - Other
8481109900 80
- - - Other
8481109910 80
- - - - For use in certain types of aircraft
8481109940 80
- - - - Pressure reducing valves in a brass case with: -a length of not more than 30 mm (± 1 mm), -a width of not more than 18 mm (± 1 mm), of a kind used for incorporation in fuel delivery modules of motor vehicles
8481109990 80
- - - - Other
8481200000 80
- Valves for oleohydraulic or pneumatic transmissions
8481201000 80
- - Valves for the control of oleohydraulic power transmission
8481201020 80
- - - For use in certain types of aircraft
8481201090 80
- - - Other
8481209000 80
- - Valves for the control of pneumatic power transmission
8481209020 80
- - - For use in certain types of aircraft
8481209090 80
- - - Other
8481300000 80
- Check (non-return) valves
8481309100 80
- - Of cast iron or of steel
8481309120 80
- - - For use in certain types of aircraft
8481309130 10
- - - Other
8481309130 80
- - - - Mechanical check (non-return) valve for opening and closing of the flow of fuel: -with an operating pressure of not more than 250 MPa, -with a flow rate of 45 cm³/minute or more, but not more than 55 cm³/minute, -with 4 input holes, each of them with a diameter of 1,2 mm or more, but not more than 1,6 mm, -made of steel
8481309191 80
- - - - Steel check (non-return) valves with: - an opening pressure of not more than 800 kPa - an external diameter not more than 37 mm
8481309199 80
- - - - Other
8481309900 80
- - Other
8481309920 80
- - - For use in certain types of aircraft
8481309950 80
- - - Mechanical check (non-return) valve for opening and closing of the flow of fuel: -with an operating pressure of not more than 250 MPa, -with a flow rate of 45 cm³/minute or more, but not more than 55 cm³/minute, -with 4 input holes, each of them with a diameter of 1,2 mm or more, but not more than 1,6 mm, -made of steel
8481309990 80
- - - Other
8481400000 80
- Safety or relief valves
8481401000 80
- - Of cast iron or of steel
8481401050 80
- - - For use in certain types of aircraft
8481401090 80
- - - Other
8481409000 80
- - Other
8481409010 80
- - - For use in certain types of aircraft
8481409090 80
- - - Other
8481800000 80
- Other appliances
8481801100 10
- - Taps, cocks and valves for sinks, washbasins, bidets, water cisterns, baths and similar fixtures
8481801100 80
- - - Mixing valves
8481801110 80
- - - - For use in certain types of aircraft
8481801190 80
- - - - Other
8481801900 80
- - - Other
8481801910 80
- - - - For use in certain types of aircraft
8481801990 80
- - - - Other
8481803100 10
- - Central heating radiator valves
8481803100 80
- - - Thermostatic valves
8481803900 80
- - - Other
8481804000 80
- - Valves for pneumatic tyres and inner tubes
8481804010 80
- - - For use in certain types of aircraft
8481804090 80
- - - Other
8481805100 10
- - Other
8481805100 20
- - - Process control valves
8481805100 80
- - - - Temperature regulators
8481805900 80
- - - - Other
8481805920 80
- - - - - Pressure regulating valve for incorporation into compressors of motor vehicle air condition units
8481805930 80
- - - - - Two-way flow control valve with housing, with: - at least 5, but not more than 16 outlet holes with at least 0,05 mm, but not more than 0,5 mm diameter, - at least 330 cm³/minute, but not more than 5 000 cm³/minute flow rate, - at least 19, but not more than 300 MPa operating pressure
8481805940 80
- - - - - Flow-control valve - made of steel, - with an outlet hole with a diameter of at least 0,05mm or more, but not more than 0,5 mm, - with an inlet hole with a diameter of at least 0,1 mm, but not more than 1,3 mm, - with chromium nitride coating, - with a surface roughness of Rp 0,4
8481805950 80
- - - - - Electromagnetic valve for quantity control with - a plunger, - a solenoid with a of coil resistance of at least 1,85 Ohm, but not more than 8,2 Ohm
8481805960 80
- - - - - Electromagnetic valve for quantity control - with a solenoid with a coil resistance of at least 0,19 Ohm, but not more than 0,66 Ohm, and with an inductance of not more than 1 mH
8481805970 80
- - - - - Flow-control valve -made of steel, -with an outlet hole with a diameter of at least 0,05 mm, but not more than 0,5 mm, -with an inlet hole with a diameter of at least 0,1 mm, but not more than 1,3 mm
8481805980 80
- - - - - Solenoid valve for combustion engine oil pump to regulate the quantity of oil in the pump: -with a cable of length of 550 mm or more but not more than 700 mm incorporating an electrical connector, -with an operating pressure of not more than 5.5 bar, -with an operating voltage of 9 VDC or more but not more than 16 VDC, -with a valve's base width of 22 mm or more but not more than 27 mm, -with a valve's length of 55 mm or more but not more than 110 mm, for use in the manufacture of motor vehicle engines
8481805990 80
- - - - - Other
8481806100 10
- - - Other
8481806100 20
- - - - Gate valves
8481806100 80
- - - - - Of cast iron
8481806300 80
- - - - - Of steel
8481806350 80
- - - - - - For use in certain types of aircraft
8481806390 80
- - - - - - Other
8481806900 80
- - - - - Other
8481806950 80
- - - - - - For use in certain types of aircraft
8481806960 10
- - - - - - Other
8481806960 80
- - - - - - - Four-way reversing valve for refrigerants, consisting of: - a solenoid pilot valve - a brass valve body including valve slider and copper connections with a working pressure up to 4,5 MPa
8481806999 80
- - - - - - - Other
8481807100 10
- - - - Globe valves
8481807100 80
- - - - - Of cast iron
8481807300 80
- - - - - Of steel
8481807310 80
- - - - - - For use in certain types of aircraft
8481807320 80
- - - - - - Pressure- and flow-control valve controlled by external electromagnet: - made of steel and/or steel alloy(s), - without integrated circuit, - of not more than 1000 kPa operating pressure, - with a flow quantity of not more than 5 l/min, - without an electromagnet
8481807390 80
- - - - - - Other
8481807900 80
- - - - - Other
8481807910 80
- - - - - - For use in certain types of aircraft
8481807940 80
- - - - - - Service valve which suits for R410A or R32 gas while connecting indoor and outdoor units with: -a withstanding pressure of the valve body of 6,3 MPa, -a leakage ratio of less than 1.6 g/a, -an impurity ratio of less than 1.2 mg/PCS, -an airtight pressure of the valve body of 4.2 Mpa for use in the manufacture of air conditioners
8481807990 80
- - - - - - Other
8481808100 80
- - - - Ball and plug valves
8481808130 80
- - - - - For use in certain types of aircraft
8481808190 80
- - - - - Other
8481808500 80
- - - - Butterfly valves
8481808530 80
- - - - - For use in certain types of aircraft
8481808590 80
- - - - - Other
8481808700 80
- - - - Diaphragm valves
8481808730 80
- - - - - For use in certain types of aircraft
8481808790 80
- - - - - Other
8481809900 80
- - - - Other
8481809940 80
- - - - - For use in certain types of aircraft
8481809970 80
- - - - - Pressure- and flow-control valve controlled by external electromagnet: - made of steel and/or steel alloy(s), - without integrated circuit, - of not more than 1000 kPa operating pressure, - with a flow quantity of not more than 5 l/min, - without an electromagnet
8481809980 80
- - - - - Solenoid valve for combustion engine continuous variable valve timing system to control oil flow as a function of engine speed and load: -in metal cover, -with electrical connector, -with a force of not more than 10 N, -with an operating voltage of 9 VDC or more but not more than 16 VDC, -with a length of 80 mm or more but not more than 110 mm, -with a width of 80 mm or more but not more than 110 mm, -with a height of 20 mm or more but not more than 30 mm, for use in the manufacture of engines of motor vehicles
8481809990 80
- - - - - Other
8481900000 80
- Parts
8481900010 80
- - For use in certain types of aircraft
8481900025 80
- - Die-cast aluminium housing for electronic throttle control or exhaust gas recirculation systems, comprising the following features: -high-pressure die-cast aluminium EN AC-46000, -shot-blasted and machined, -height of 100 mm or more but not exceeding 135 mm, -width of 115 mm or more but not exceeding 150 mm, -weight of 210 g or more but not more than 500 g
8481900040 80
- - Valve armature: - for the opening and closing of the flow of fuel, - consisting of a shaft and a blade, - with at least 3 but not more than 8 holes on the blade, - made of metal and/or metal alloy(s)
8481900050 80
- - Silicone or plastic keyboards, comprising: -parts of common metal, and -whether or not comprising parts of plastic, -epoxy resin reinforced with fiberglass or wood, -whether or not printed or surface-treated, -with or without electrical conductors, -with or without a membrane bonded to the keyboard, -with or without mono or multilayer protective film
8481900060 80
- - Nozzle body for the regulation of angle and distribution of fuel injection: -of a cylindrical shape, -made of stainless steel, -with 4 or more, but not more than 16 holes, -with a flow rate of 100 cm³/minute or more, but not more than 500 cm³/minute
8481900070 80
- - Nozzle needle for opening and closing the flow of fuel in the engine, with: -2 holes, -4 grooves, -a diameter of 3 mm or more, but not more than 6 mm, -a length of 25 mm or more, but not more than 35 mm, -made of stainless steel with hard-chrome plating
8481900080 80
- - Flow-control valve -made of steel, -with an outlet hole with a diameter of at least 0,05 mm, but not more than 0,5 mm, -with an inlet hole with a diameter of at least 0,1 mm, but not more than 1,3 mm
8481900090 80
- - Other