Jump to content

Tariff number 8504408490 80 - Other

Import trade restrictions for 8504408490 80

This table contains information on trade restrictions for the import of goods into the EU and the EU into third countries. The table contains information on trade restrictions which are imposed due to customs unions, preferences, tariff quotas, customs unions, veterinary controls, third country duties and non-preferential tariff quotas. Our products
Origin StartDuty / TaxLegal
1011
ERGA OMNES 1011
01-07-2016
0.000 %
Regulation 2658/87
Suspension - goods for certain categories of ships, boats and other vessels and for drilling or production platforms 117

Explanation of trade restrictions

Erga Omnes means "for all".

Third countries are countries that are not part of the EU.

GSP means "Generalised System of Preferences".

GSP Plus means "Generalised System of Preferences Plus".

European Economic Area (EEA) means all EU member states and Iceland, Liechtenstein and Norway.

OCTs stands for "Overseas Countries and Territories". They are countries and territories that are not part of the EU. More information

CARIFORUM is a regional economic integration organisation comprising 15 Caribbean Community (CARICOM) countries and the Dominican Republic.

SADC EPA stands for "Southern African Development Community - Economic Partnership Agreement".

Duty means "customs duties".

History

Duty rates and measures for this code over time (yearly snapshots).

Information

When importing or exporting "Other", it is crucial to have the correct HS code or TARIC code. The HS code 8504408490 80 serves as the standard code for this product, ensuring that the appropriate duties and taxes are applied when crossing international borders.

To ensure your business transactions run smoothly when importing or exporting "Other", consider the following points:

  1. Inform yourself about the specific import and export regulations in the countries involved. This includes possible restrictions, taxes, and duties applicable to "Other".
  2. Check if any additional licenses, permits, or certificates are required to import "Other" into the destination country or export it from the country of origin.
  3. Make sure your trading partners have valid identification numbers, such as EORI numbers (Economic Operators Registration and Identification) in the EU, to streamline trade and minimize delays.
  4. Ensure that all trade- and customs-related documents (such as commercial invoices, packing lists, certificates of origin, and insurance policies) are accurately completed and adhere to the respective national regulations.
  5. Keep an eye on the current exchange rates, as well as packaging, shipping, and insurance costs, to accurately calculate trade costs.

In summary, the HS code or TARIC code for "Other" is 8504408490 80. Make sure you accurately use this code in all your trade and customs documents to guarantee smooth and hassle-free transactions. With these tips, you'll be better prepared for the challenges of international trade and can successfully import and export "Other".

HS Code structure

85
Chapter
04
Heading
40
Subheading
84
CN Subheading
90
TARIC Subheading
80
Additional TARIC codes

1. Chapter

There are 21 different sections, which are divided into 96 chapters. Exceptional chapters include chapter 77, which is reserved for future use, chapters 98 and 99, which are limited at national level, and chapter 99, which is a specific code for temporary changes. In the example above, chapter 85 was selected for electrical machinery and equipment and parts thereof; sound recorders and reproducers, television image and sound recorders and reproducers, and parts and accessories of such articles

2. Heading

The heading determines the specific category within a certain chapter. In the example above, the 04 refers to Electrical transformers, static converters (for example, rectifiers) and inductors.

3. Subheading

The last two digits of the international harmonized code are more specific and define subcategories of products. In the example above, the 40 refers to Other.

HS Code tree structure

8500000000 80

Chapter ELECTRICAL MACHINERY AND EQUIPMENT AND PARTS THEREOF; SOUND RECORDERS AND REPRODUCERS, TELEVISION IMAGE AND SOUND RECORDERS AND REPRODUCERS, AND PARTS AND ACCESSORIES OF SUCH ARTICLES

8504000000 80

Electrical transformers, static converters (for example, rectifiers) and inductors

8504100000 80

- Ballasts for discharge lamps or tubes

8504102000 80

- - Inductors, whether or not connected with a capacitor

8504102010 80

- - - For use in civil aircraft

8504102090 80

- - - Other

8504108000 80

- - Other

8504108010 80

- - - For use in civil aircraft

8504108090 80

- - - Other

8504210000 10

- Liquid dielectric transformers

8504210000 80

- - Having a power handling capacity not exceeding 650 kVA

8504220000 80

- - Having a power handling capacity exceeding 650 kVA but not exceeding 10 000 kVA

8504221000 80

- - - Exceeding 650 kVA but not exceeding 1 600 kVA

8504229000 80

- - - Exceeding 1 600 kVA but not exceeding 10 000 kVA

8504230000 80

- - Having a power handling capacity exceeding 10 000 kVA

8504310000 10

- Other transformers

8504310000 80

- - Having a power handling capacity not exceeding 1 kVA

8504312100 10

- - - Measuring transformers

8504312100 80

- - - - For voltage measurement

8504312110 80

- - - - - For use in civil aircraft

8504312190 80

- - - - - Other

8504312900 80

- - - - Other

8504312910 80

- - - - - For use in civil aircraft

8504312990 80

- - - - - Other

8504318000 80

- - - Other

8504318010 80

- - - - For use in civil aircraft

8504318020 80

- - - - Transformer for use in the manufacture of inverters in LCD modules

8504318030 80

- - - - Switching transformers, having a power handling capacity of not more than 1 kVA for use in the manufacture of static converters

8504318040 80

- - - - Electrical transformers: - with a capacity of 1 kVA or less - without plugs or cables, for internal use in the manufacture of set top boxes and TVs

8504318090 80

- - - - Other

8504320000 80

- - Having a power handling capacity exceeding 1 kVA but not exceeding 16 kVA

8504320010 80

- - - For use in civil aircraft

8504320090 80

- - - Other

8504330000 80

- - Having a power handling capacity exceeding 16 kVA but not exceeding 500 kVA

8504330010 80

- - - For use in civil aircraft

8504330090 80

- - - Other

8504340000 80

- - Having a power handling capacity exceeding 500 kVA

8504400000 80

- Static converters

8504403000 80

- - Of a kind used with telecommunication apparatus, automatic data-processing machines and units thereof

8504403010 80

- - - For use in civil aircraft

8504403090 80

- - - Other

8504405500 10

- - Other

8504405500 80

- - - Accumulator chargers

8504405510 80

- - - - For use in civil aircraft

8504405590 80

- - - - Other

8504408200 10

- - - Other

8504408200 80

- - - - Rectifiers

8504408210 80

- - - - - For use in civil aircraft

8504408220 80

- - - - - Electric rectifier, with a capacity of not more than 1 kVA, for use in the manufacture of appliances falling within subheading 8509 80 and heading 8510

8504408230 80

- - - - - Power supply boards for use in the manufacture of goods falling under heading 8521 and 8528

8504408240 80

- - - - - Printed circuit board equipped with a bridge rectifier circuit and other active and passive components - with two output connectors - with two input connectors which are available and useable in parallel - able to switch between bright and dimmed operation mode - with an input voltage of 40 V (+ 25 % -15 %) or 42 V (+ 25 % -15 %) in bright operation mode, with an input voltage of 30 V (± 4 V) in dimmed operation mode, or - with an input voltage of 230 V (+20 % -15 %) in bright operation mode, with an input voltage of 160 V (± 15 %) in dimmed operation mode, or - with an input voltage of 120 V (15 % -35 %) in bright operation mode, with an input voltage of 60 V (± 20 %) in dimmed operation mode - with an input current reaching 80 % of its nominal value within 20 ms - with an input frequency of 45 Hz or more, but not more than 65 Hz for 42 V and 230 V, and 45-70 Hz for 120 V versions - with an maximum inrush current overshoot of not more than 250 % of the input current - with a period of the inrush current overshoot of not more than 100 ms - with an input current undershoot of not less than 50 % of the input current - with a period of the inrush current undershoot of not more than 20 ms - with a presettable output current - with an output current reaching 90 % of its nominal pre-set value within 50 ms - with an output current reaching zero within 30 ms after removal of the input voltage - with an defined failure status in case of no-load or too-high load (end-of-life function)

8504408290 80

- - - - - Other

8504408400 10

- - - - Inverters

8504408400 80

- - - - - Having a power handling capacity not exceeding 7,5 kVA

8504408410 80

- - - - - - For use in civil aircraft

8504408490 80

- - - - - - Other

8504408800 80

- - - - - Having a power handling capacity exceeding 7,5 kVA

8504408810 80

- - - - - - For use in civil aircraft

8504408830 10

- - - - - - Other

8504408830 80

- - - - - - - DC to AC inverter for use in traction motor control for use in the manufacture of electric vehicles

8504408899 80

- - - - - - - Other

8504409000 80

- - - - Other

8504409010 80

- - - - - For use in civil aircraft

8504409020 80

- - - - - Direct current to direct current converter

8504409030 80

- - - - - Static converter comprising a power switch with insulated-gate bipolar transistors (IGBTs), contained in a housing, for use in the manufacture of microwave ovens of subheading 8516 50 00

8504409040 80

- - - - - Semiconductor power modules comprising: - power transistors, - integrated circuits, - whether or not containing diodes and with or without thermistors, - an operating voltage of not more than 600 V, - not more than three electrical outputs each containing two power switches (whether MOSFET (Metal Oxide Semiconductor Field-Effect Transistor) or IGBT (Insulated Gate Bi-polar Transistors)) and internal drives, and - a rms (root mean square) current rating of not more than 15,7 A

8504409050 80

- - - - - Drive unit for industrial robot with: - one or six 3-phase motor outputs with maximum 3 x 32 A, - a main power input of 220 V AC or more, but not more than 480 V AC, or 280 V DC or more, but not more than 800 V DC - a logic power input of 24 V DC, - an EtherCat communication interface, - and a dimension of 150 x 140 x 120 mm or more, but not more than 335 x 430 x 179 mm

8504409060 80

- - - - - Transfer moulded semiconductor power module comprising: - power transistors, - integrated circuits, - whether or not containing diodes and with or without thermistors, - a circuit configuration, - either containing a direct drive stage with an operating voltage of more than 600 V, - or containing a direct drive stage with an operating voltage of not more than 600 V and a rms current of more than 15,7 A, - or including one or more power factor correction modules

8504409070 80

- - - - - Module for converting alternating current into direct current and direct current into direct current with - a rated power of not more than 100 W - an input voltage of 80 V or more, but not more than 305 V - an certified input frequency of 47 Hz or more, but not more than 440 Hz - one or more constant voltage output(s) - an operating temperature range of - 40 °C or more, but not more than + 85 °C, - pins for mounting to a printed circuit

8504409080 80

- - - - - Power converter containing: - a DC to DC converter - a charger of a capacity of not not more than 7 kw - switching functions for use in the manufacture of electric vehicles

8504409090 80

- - - - - Other

8504500000 80

- Other inductors

8504502000 80

- - Of a kind used with telecommunication apparatus and for power supplies for automatic data-processing machines and units thereof

8504502010 80

- - - For use in civil aircraft

8504502090 80

- - - other

8504509500 80

- - Other

8504509510 80

- - - For use in civil aircraft

8504509520 80

- - - Inductor with an inductance of not more than 62 mH

8504509540 80

- - - Coil choke with: - an inductance of 4,7 μH (± 20 %), - a DC resistance of not more than 0,1 Ohms, - an insulation resistance of 100 MOhms or more at 500 V (DC) for use in the manufacture of LCD and LED module power boards

8504509550 80

- - - Solenoid coil with - a power consumption of not more than 6 W, - an insulation resistance of more than 100 M ohms, and - an insert hole of 11,4 mm or more, but not more than 11,8 mm

8504509590 80

- - - other

8504900000 80

- Parts

8504900500 10

- - Of transformers and inductors

8504900500 80

- - - Electronic assemblies of machines of subheading 8504 50 20

8504901100 20

- - - Other

8504901100 80

- - - - Ferrite cores

8504901110 80

- - - - - Ferrite cores, other than for deflection yokes

8504901120 80

- - - - - Reactor cores for use in a High Voltage Direct Current thyristor converter

8504901190 80

- - - - - Other

8504901800 80

- - - - Other

8504901810 80

- - - - - For use in certain types of aircraft

8504901899 80

- - - - - Other

8504909100 10

- - Of static converters

8504909100 80

- - - Electronic assemblies of machines of subheading 8504 40 30

8504909900 80

- - - Other

8504909910 80

- - - - For use in certain types of aircraft

8504909920 80

- - - - Thyristor SGCT (Symmetric Gate-Commutated Thyristor) with integrated gate driver: - being a power electronic circuit mounted on the PCB, equipped with SGCT thyristor and electric and electronic components, - having an ability to block the voltage - 6 500 V - in both directions (conducting and the reverse direction) of a kind used in medium voltagestatic converters (rectifiers and inverters)

8504909990 80

- - - - Other