Tariff number 3824995800 80 - Nicotine patches (transdermal systems), intended to assist smokers to stop smoking

3824000000 80

Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included

3824100000 80

- Prepared binders for foundry moulds or cores

3824100010 80

- - Based on synthetic resins

3824100090 80

- - Other

3824300000 80

- Non-agglomerated metal carbides mixed together or with metallic binders

3824300010 80

- - Tungsten carbide simply mixed with metallic powder

3824300090 80

- - Other

3824400000 80

- Prepared additives for cements, mortars or concretes

3824500000 80

- Non-refractory mortars and concretes

3824501000 80

- - Concrete ready to pour

3824509000 80

- - Other

3824600000 80

- Sorbitol other than that of subheading 2905 44

3824601100 10

- - In aqueous solution

3824601100 80

- - - Containing 2 % or less by weight of D-mannitol, calculated on the D-glucitol content

3824601900 80

- - - Other

3824609100 10

- - Other

3824609100 80

- - - Containing 2 % or less by weight of D-mannitol, calculated on the D-glucitol content

3824609900 80

- - - Other

3824710000 10

- Mixtures containing halogenated derivatives of methane, ethane or propane

3824710000 80

- - Containing chlorofluorocarbons (CFCs), whether or not containing hydrochlorofluorocarbons (HCFCs), perfluorocarbons (PFCs) or hydrofluorocarbons (HFCs)

3824720000 80

- - Containing bromochlorodifluoromethane, bromotrifluoromethane or dibromotetrafluoroethanes

3824730000 80

- - Containing hydrobromofluorocarbons (HBFCs)

3824740000 80

- - Containing hydrochlorofluorocarbons (HCFCs), whether or not containing perfluorocarbons (PFCs) or hydrofluorocarbons (HFCs), but not containing chlorofluorocarbons (CFCs)

3824750000 80

- - Containing carbon tetrachloride

3824760000 80

- - Containing 1,1,1-trichloroethane (methyl chloroform)

3824770000 80

- - Containing bromomethane (methyl bromide) or bromochloromethane

3824780000 80

- - Containing perfluorocarbons (PFCs) or hydrofluorocarbons (HFCs), but not containing chlorofluorocarbons (CFCs) or hydrochlorofluorocarbons (HCFCs)

3824781000 80

- - - Containing only 1,1,1-trifluoroethane and pentafluoroethane

3824782000 80

- - - Containing only 1,1,1-trifluoroethane, pentafluoroethane and 1,1,1,2-tetrafluoroethane

3824783000 80

- - - Containing only difluoromethane and pentafluoroethane

3824784000 80

- - - Containing only difluoromethane, pentafluoroethane and 1,1,1,2-tetrafluoroethane

3824788000 80

- - - Containing unsaturated hydrofluorocarbons

3824789000 80

- - - Other

3824790000 80

- - Other

3824810000 10

- Goods specified in subheading note 3 to this chapter

3824810000 80

- - Containing oxirane (ethylene oxide)

3824820000 80

- - Containing polychlorinated biphenyls (PCBs), polychlorinated terphenyls (PCTs) or polybrominated biphenyls (PBBs)

3824830000 80

- - Containing tris(2,3-dibromopropyl) phosphate

3824840000 80

- - Containing aldrin (ISO), camphechlor (ISO) (toxaphene), chlordane (ISO), chlordecone (ISO), DDT (ISO) (clofenotane (INN), 1,1,1-trichloro-2,2-bis(p-chlorophenyl)ethane), dieldrin (ISO, INN), endosulfan (ISO), endrin (ISO), heptachlor (ISO) or mirex (ISO)

3824850000 80

- - Containing 1,2,3,4,5,6-hexachlorocyclohexane (HCH (ISO)), including lindane (ISO, INN)

3824860000 80

- - Containing pentachlorobenzene (ISO) or hexachlorobenzene (ISO)

3824870000 80

- - Containing perfluorooctane sulphonic acid, its salts, perfluorooctane sulphonamides, or perfluorooctane sulphonyl fluoride

3824880000 80

- - Containing tetra-, penta-, hexa-, hepta- or octabromodiphenyl ethers

3824910000 10

- Other

3824910000 80

- - Mixtures and preparations consisting mainly of (5-ethyl-2-methyl-2-oxido-1,3,2-dioxaphosphinan-5-yl)methyl methyl methylphosphonate and bis[(5-ethyl-2-methyl-2-oxido-1,3,2-dioxaphosphinan-5-yl)methyl] methylphosphonate

3824990000 80

- - Other

3824991000 80

- - - Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts

3824991500 80

- - - Ion-exchangers

3824991510 80

- - - - Acid aluminosilicate (artificial zeolite of the Y type) in the sodium form, containing by weight not more than 11 % of sodium evaluated as sodium oxide, in the form of rodlets

3824991590 80

- - - - Other

3824992000 80

- - - Getters for vacuum tubes

3824992500 80

- - - Pyrolignites (for example, of calcium); crude calcium tartrate; crude calcium citrate

3824993000 80

- - - Naphthenic acids, their water-insoluble salts and their esters

3824994500 10

- - - Other

3824994500 80

- - - - Anti-scaling and similar compounds

3824995000 80

- - - - Preparations for electroplating

3824995500 80

- - - - Mixtures of mono-, di- and tri-, fatty acid esters of glycerol (emulsifiers for fats)

3824996100 10

- - - - Products and preparations for pharmaceutical or surgical uses

3824996100 80

- - - - - Intermediate products of the antibiotics manufacturing process obtained from the fermentation of Streptomyces tenebrarius, whether or not dried, for use in the manufacture of human medicaments of heading 3004

3824996200 80

- - - - - Intermediate products from the manufacture of monensin salts

3824996400 80

- - - - - Other

3824996500 80

- - - - Auxiliary products for foundries (other than those of subheading 3824 10 00)

3824997000 80

- - - - Fireproofing, waterproofing and similar protective preparations used in the building industry

3824997500 10

- - - - Other

3824997500 80

- - - - - Lithium niobate wafer, undoped

3824998000 80

- - - - - Mixture of amines derived from dimerised fatty acids, of an average molecular weight of 520 or more but not exceeding 550

3824998500 80

- - - - - 3-(1-Ethyl-1-methylpropyl)isoxazol-5-ylamine, in the form of a solution in toluene

3824998600 80

- - - - - Mixtures consisting mainly of dimethyl methylphosphonate, oxirane and diphosphorus pentaoxide

3824999200 10

- - - - - Chemical products or preparations, predominantly composed of organic compounds, not elsewhere specified or included

3824999200 80

- - - - - - In the form of a liquid at 20 °C

3824999210 10

- - - - - - - Blends containing by weight more than 20 % of paraffinic gasoil obtained from synthesis and/or hydro-treatment, of non-fossil origin

3824999210 80

- - - - - - - - Consigned from Canada

3824999212 80

- - - - - - - - Other

3824999220 80

- - - - - - - Blends containing by weight 20 % or less of paraffinic gasoil obtained from synthesis and/or hydro-treatment, of non-fossil origin

3824999222 80

- - - - - - - Aqueous solution containing by weight - 38 % or more but not more than 42 % of 2-(3-chloro-5-(trifluoromethyl)pyridin-2-yl)ethanamine (CAS RN 658066-44-5), - 21 % or more but not more than 25 % of sulphuric acid (CAS RN 7664-93-9) and - 1 % or more but not more than 2,9 % of methanol (CAS RN 67-56-1)

3824999223 80

- - - - - - - Butylphosphato complexes of titanium(IV) (CAS RN 109037-78-7), dissolved in ethanol and propan-2-ol

3824999225 80

- - - - - - - Preparation containing by weight: - 25 % or more but not more than 50 % of diethyl carbonate (CAS RN 105-58-8) - 25 % or more but not more than 50 % of ethylene carbonate (CAS RN 96-49-1) - 10 % or more but not more than 20 % of lithium hexafluorophosphate (CAS RN 21324-40-3) - 5 % or more but not more than 10 % of ethyl methyl carbonate (CAS RN 623-53-0) - 1 % or more but not more than 2 % of vinylene carbonate (CAS RN 872-36-6) - 1 % or more but not more than 2 % of 4-fluoro-1,3-dioxolane-2-one (CAS RN 114435-02-8) - Not more than 1 % of 1,5,2,4-Dioxadithiane 2,2,4,4-tetraoxide (CAS RN 99591-74-9)

3824999227 80

- - - - - - - 4-Methoxy-3-(3-morpholin-4-yl-propoxy)-benzonitrile (CAS RN 675126-28-0) in an organic solvent

3824999230 80

- - - - - - - Aqueous solution of caesium formate and potassium formate containing by weight: - 1 % or more but not more than 84 % of caesium formate (CAS RN 3495-36-1), - 1 % or more but not more than 76 % of potassium formate (CAS RN 590-24-1), and - whether or not containing not more than 9 % of additives

3824999232 80

- - - - - - - Mixture of divinylbenzene-isomers and ethylvinylbenzene-isomers, containing by weight 56 % or more but not more than 85 % of divinylbenzene (CAS RN 1321-74-0)

3824999233 80

- - - - - - - Anti-corrosion preparations consisting of salts of dinonylnaphthalenesulphonic acid, either: - on a support of mineral wax, whether or not modified chemically, or - in the form of a solution in an organic solvent

3824999234 80

- - - - - - - Oligomer of tetrafluoroethylene, having one iodoethyl end-group

3824999235 80

- - - - - - - Preparations containing not less than 92 % but not more than 96,5 % by weight of 1,3:2,4-bis-O-(4-methylbenzylidene)-D-glucitol and also containing carboxylic acid derivatives and an alkyl sulphate

3824999236 80

- - - - - - - Calcium phosphonate phenate, dissolved in mineral oil

3824999237 80

- - - - - - - Mixture of acetates of 3-butylene-1,2-diol with a content by weight of 65 % or more but not more than 90 %

3824999239 80

- - - - - - - Preparations containing not less than 47 % by weight of 1,3:2,4-bis-O-benzylidene-D-glucitol

3824999240 80

- - - - - - - Solution of 2-chloro-5-(chloromethyl)-pyridine (CAS RN 70258-18-3) in organic diluent

3824999242 80

- - - - - - - Preparation of tetrahydro-α-(1-naphthylmethyl)furan-2-propionic acid (CAS RN 25379-26-4) in toluene

3824999244 80

- - - - - - - Preparation containing by weight: - 85 % or more but not more than 95 % of α-4-(2-cyano-2-butoxycarbonyl)vinyl-2-methoxy-phenyl-ω-hydroxyhexa(oxyethylene), and - 5 % or more but not more than 15 % of polyoxyethylene (20) sorbitan monopalmitate

3824999245 80

- - - - - - - Preparation consisting predominantly of γ-butyrolactone and quaternary ammonium salts, for the manufacture of electrolytic capacitors

3824999246 80

- - - - - - - Diethylmethoxyborane (CAS RN 7397-46-8) in the form of a solution in tetrahydrofuran

3824999247 80

- - - - - - - Preparation, containing: - trioctylphosphine oxide (CAS RN 78-50-2), - dioctylhexylphosphine oxide (CAS RN 31160-66-4), - octyldihexylphosphine oxide (CAS RN 31160-64-2) and - trihexylphosphine oxide (CAS RN 3084-48-8)

3824999248 80

- - - - - - - Mixture of: - 3,3-bis(2-methyl-1-octyl-1H-indol-3-yl)phthalide (CAS RN 50292-95-0) and - ethyl-6'-(diethylamino)-3-oxo-spiro-[isobenzofuran-1(3H),9'-[9H]xanthene]-2'-carboxylate (CAS RN 154306-60-2)

3824999249 80

- - - - - - - Preparation based on 2,5,8,11-tetramethyl-6-dodecyn-5,8-diol ethoxylate (CAS RN 169117-72-0)

3824999250 80

- - - - - - - Alkyl carbonate-based preparation, also containing a UV absorber, for use in the manufacture of spectacle lenses

3824999251 80

- - - - - - - Mixture containing by weight 40 % or more but not more than 50 % of 2-hydroxyethyl methacrylate and 40 % or more but not more than 50 % of glycerol ester of boric acid

3824999253 80

- - - - - - - Preparations consisting predominantly of ethylene glycol and: - either diethylene glycol, dodecandioic acid and ammonia water, - or N,N-dimethylformamide, - or γ-butyrolactone, - or silicon oxide, - or ammonium hydrogen azelate, - or ammonium hydrogen azelate and silicon oxide, - or dodecandioic acid, ammonia water and silicon oxide, for the manufacture of electrolytic capacitors

3824999254 80

- - - - - - - Poly(tetramethylene glycol) bis[(9-oxo-9H-thioxanthen-1-yloxy)acetate] with an average polymer chain length of less than 5 monomer units (CAS RN 813452-37-8)

3824999255 80

- - - - - - - Additives for paints and coatings, containing: - a mixture of esters of phosphoric acid obtained from the reaction of phosphoric anhydride with 4-(1,1-dimethylpropyl) phenol and copolymers of styrene-allyl alcohol (CAS RN 84605-27-6), and - 30 % or more but not more than 35 % by weight of isobutyl alcohol

3824999256 80

- - - - - - - Poly(tetramethylene glycol) bis[(2-benzoyl-phenoxy)acetate] with an average polymer chain length of less than 5 monomer units

3824999257 80

- - - - - - - Poly(ethylene glycol) bis(p-dimethyl)aminobenzoate with an average polymer chain length of less than 5 monomer units

3824999258 80

- - - - - - - 2-Hydroxybenzonitrile, in the form of a solution in N,N-dimethylformamide, containing by weight 45 % or more but not more than 55 % of 2-hydroxybenzonitrile

3824999259 80

- - - - - - - Potassium tert-butanolate (CAS RN 865-47-4) in the form of a solution in tetrahydrofuran

3824999260 80

- - - - - - - N2-[1-(S)-Ethoxycarbonyl-3-phenylpropyl]-N6-trifluoroacetyl-L-lysyl-N2-carboxy anhydride in a solution of dichloromethane at 37 %

3824999261 80

- - - - - - - 3',4',5'-Trifluorobiphenyl-2-amine, in the form of a solution in toluene containing by weight 80 % or more but not more than 90 % of 3',4',5'-trifluorobiphenyl-2-amine

3824999263 80

- - - - - - - Polymer consisting of a polycondensate of formaldehyde and naphthalenediol, chemically modified by reaction with an alkyne halide, dissolved in propylene glycol methyl ether acetate

3824999264 80

- - - - - - - Preparation containing by weight: - 89 % or more but not more than 98,9 % of 1,2,3-trideoxy-4,6:5,7-bis-O-[(4-propylphenyl)methylene]-nonitol - 0,1 % or more but not more than 1 % of colourants - 1 % or more but not more than 10 % of fluoropolymers

3824999265 80

- - - - - - - Mixture of primary tert-alkylamines

3824999266 10

- - - - - - - Ethyl alcohol produced from agricultural products (as listed in Annex I to the Treaty on the Functioning of the European Union), denatured or undenatured, excluding products with a water content of more than 0,3 % (m/m) measured according to the standard EN 15376, but including ethyl alcohol produced from agricultural products (as listed in Annex I to the Treaty on the Functioning of the European Union) contained in blends with gasoline with an ethyl alcohol content of more than 10 % (v/v)

3824999266 80

- - - - - - - - For use as fuel

3824999267 80

- - - - - - - - For other uses

3824999268 80

- - - - - - - Preparation containing by weight: - 20 % (±1 %) ((3-(sec-butyl)-4-(decyloxy)phenyl)methanetriyl) Tribenzene (CAS RN 1404190-37-9), Dissolved in: - 10 % (± 5 %) 2-sec-Butylphenol (CAS RN 89-72-5) - 64 %( ±7 %) Solvent naphtha (petroleum), heavy aromatic (CAS RN 64742-94-5) and - 6 % (± 1.0 %) Naphthalene (CAS RN 91-20-3)

3824999269 80

- - - - - - - Preparation containing by weight: - 80 % or more but not more than 92 % of Bisphenol-A bis(diphenyl phosphate) (CAS RN 5945-33-5) - 7 % or more but not more than 20 % oligomers of Bisphenol-A bis(diphenyl phosphate) and - not more than 1 % triphenyl phosphate (CAS RN 115-86-6)

3824999270 80

- - - - - - - Mixture of 80 % (± 10 %) of 1-[2-(2-aminobutoxy)ethoxy]but-2-ylamine and 20 % (± 10 %) of 1-({[2-(2-aminobutoxy)ethoxy]methyl} propoxy)but-2-ylamine

3824999271 80

- - - - - - - Mixtures containing by weight: - 60 % or more but not more than 90 % of 2-chloropropene (CAS RN 557-98-2), - 8 % or more but not more than 14 % of (Z)-1-chloropropene (CAS RN 16136-84-8), - 5 % or more but not more than 23 % of 2-chloropropane (CAS RN 75-29-6), - not more than 6 % of 3-chloropropene (CAS RN 107-05-1), and - not more than 1 % of ethyl chloride (CAS RN 75-00-3)

3824999272 80

- - - - - - - N-(2-phenylethyl)-1,3-benzenedimethanamine derivatives (CAS RN 404362-22-7)

3824999273 80

- - - - - - - α-(2,4,6-Tribromophenyl)-ω-(2,4,6-tribromophenoxy)poly[oxy(2,6-dibromo-1,4-phenylene)isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl]

3824999274 80

- - - - - - - C6-24 and C16-18-unsaturated fatty acid esters with sucrose (sucrose polysoyate) (CAS RN 93571-82-5)

3824999275 80

- - - - - - - Aqueous solution of polymers and ammonia consisting of: - 0,1 % or more but not more than 0,5 % by weight of ammonia (CAS RN 1336-21-6) and - 0,3 % or more but not more than 10 % by weight of polycarboxylate (linear polymers of acrylic acid)

3824999276 80

- - - - - - - Preparation containing: - 74 % or more but not more than 90 % by weight of (S)-α-hydroxy-3-phenoxy-benzeneacetonitrile (CAS RN 61826-76-4) and - 10 % or more but not more than 26 % by weight of toluene (CAS RN 108-88-3)

3824999277 80

- - - - - - - Preparation containing by weight: - 55% or more but not more than 78% of dimethyl gluterate - 10% or more but not more than 30% of dimethyl adipate and - not more than 35% of dimethyl succinate

3824999278 80

- - - - - - - Preparation containing by weight either 10 % or more but not more than 20 % of lithiumfluorophosphate or 5 % or more but not more than 10 % of lithium perchlorate in mixtures of organic solvents

3824999280 80

- - - - - - - Diethylene glycol propylene glycol triethanolamine titanate complexes (CAS RN 68784-48-5) dissolved in diethylene glycol (CAS RN 111-46-6)

3824999281 80

- - - - - - - Preparation consisting of: - 50 % (±2 %) by weight of bis-alkoxylated ethyl acetoacetate aluminium chelates, - in an ink oil (white mineral) solvent with a boiling point of 160 °C or more but not more than 180 °C

3824999282 80

- - - - - - - T-butylchloride dimethylsilane (CAS RN 18162-48-6) solution in toluene

3824999283 80

- - - - - - - Preparation, consisting of two or more of the following glycols: - dipropylene glycol - tripropylene glycol - tetrapropylene glycol or - pentapropylene glycol

3824999284 80

- - - - - - - Preparation consisting by weight of 83 % or more of 3a,4,7,7a-tetrahydro-4,7-methanoindene (dicyclopentadiene), a synthetic rubber, whether or not containing by weight 7 % or more of tricyclopentadiene, and: - either an aluminium-alkyl compound, - or an organic complex of tungsten - or an organic complex of molybdenum

3824999285 80

- - - - - - - Mixture of bis [3-(triethoxysilyl)propyl]sulphides (CAS RN 211519-85-6)

3824999286 80

- - - - - - - Liquid crystal mixture for use in the manufacture of displays

3824999287 80

- - - - - - - Acetophenone (CAS RN 98-86-2), with a purity by weight of 60 % or more but not more than 90 %

3824999288 80

- - - - - - - 2,4,7,9-Tetramethyldec-5-yne-4,7-diol, hydroxyethylated

3824999299 80

- - - - - - - Other

3824999300 80

- - - - - - Other

3824999335 80

- - - - - - - Paraffin with a level of chlorination of 70 % or more

3824999340 80

- - - - - - - Anti-corrosion preparations consisting of salts of dinonylnaphthalenesulphonic acid, either: - on a support of mineral wax, whether or not modified chemically, or - in the form of a solution in an organic solvent

3824999342 80

- - - - - - - Mixture of bis{4-(3-(3-phenoxycarbonylamino)tolyl)ureido}phenylsulphone, diphenyltoluene-2,4-dicarbamate and 1-[4-(4-aminobenzenesulphonyl)-phenyl]-3-(3-phenoxycarbonylamino-tolyl)-urea

3824999343 80

- - - - - - - Solid extract of the residual, insoluble in aliphatic solvents, obtained during the extraction of rosin from wood, having the following characteristics: - a resin acid content not exceeding 30 % by weight, - an acid number not exceeding 110 and - a melting point of 100!o! C or more

3824999345 80

- - - - - - - Sodium hydrogen 3-aminonaphthalene-1,5-disulphonate (CAS RN 4681-22-5) containing by weight: - not more than 20 % of disodium sulphate, and - not more than 10 % of sodium chloride

3824999350 80

- - - - - - - Preparation, consisting of acesulfame potassium (CAS RN 55589-62-3) and potassium hydroxide (CAS RN 1310-58-3)

3824999353 80

- - - - - - - Zinc dimethacrylate (CAS RN 13189-00-9), containing not more than 2,5 % by weight of 2,6-di-tert-butyl-alpha-dimethyl amino-p-cresol (CAS RN 88-27-7), in the form of powder

3824999355 80

- - - - - - - Mixture containing by weight - 70 % or more, but not more than 90 % of (S)-indoline-2-carboxylic acid (CAS RN 79815-20-6) and - 10 % or more, but not more than 30 % of o-chlorocinnamic acid (CAS RN 3752-25-8)

3824999357 80

- - - - - - - Liquid crystal mixture for use in the manufacture of displays

3824999363 80

- - - - - - - Mixture of phytosterols, not in the form of powder, containing by weight: - 75 % or more of sterols, - not more than 25 % of stanols, for use in the manufacture of stanols/sterols or stanol/sterol esters

3824999367 80

- - - - - - - Mixture of phytosterols, in the form of powder, containing by weight: - 75% or more of sterols, - not more than 25% of stanols for use in the manufacture of stanols/sterols or stanol/sterol esters

3824999370 80

- - - - - - - Oligomeric reaction product, consisting of bis(4-hydroxyphenyl) sulfone and 1,1'-oxybis(2-chloroethane)

3824999373 80

- - - - - - - Oligomer of tetrafluoroethylene, having tetrafluoroiodoethyl end-groups

3824999375 80

- - - - - - - Mixture of phytosterols, in the form of flakes and balls, containing by weight 80 % or more of sterols and not more than 4 % of stanols

3824999377 80

- - - - - - - Powder mixture containing by weight: - 85 % or more of zinc diacrylate (CAS RN 14643-87-9) - and not more than 5 % of 2,6-di-tert-butyl-alpha-dimethylamino-p-cresol (CAS RN 88-27-7)

3824999380 80

- - - - - - - Film containing oxides of barium or calcium combined with either oxides of titanium or zirconium, in an acrylic binding material

3824999383 80

- - - - - - - Preparation containing: - C,C'-azodi(formamide) (CAS RN 123-77-3), - magnesium oxide (CAS RN 1309-48-4) and - zinc bis(p-toluene sulphinate) (CAS RN 24345-02-6) in which the gas formation from C,C'-azodi(formamide) occurs at 135 °C

3824999385 80

- - - - - - - Particles of silicon dioxide on which are covalently bonded organic compounds, for use in the manufacture of high performance liquid chromatography columns (HPLC) and sample preparation cartridges

3824999388 80

- - - - - - - Mixture of phytosterols derived from wood and wood based oils (tall oil), in the form of powder, containing by weight: - 60 % or more, but not more than 80 % of sitosterols, - not more than 15 % of campesterols, - not more than 5 % of stigmasterols and - not more than 15 % of betasitostanols

3824999390 80

- - - - - - - Other

3824999600 80

- - - - - Other

3824999635 80

- - - - - - Calcined bauxite (refractory grade)

3824999637 80

- - - - - - Structured silica alumina phosphate

3824999640 80

- - - - - - Anti-corrosion preparations consisting of salts of dinonylnaphthalenesulphonic acid, either: - on a support of mineral wax, whether or not modified chemically, or - in the form of a solution in an organic solvent

3824999646 80

- - - - - - Manganese zinc ferrite granulate, containing by weight: - 52 % or more but not more than 76 % of iron(III)oxide, - 13 % or more but not more than 42 % of manganese oxide, and - 2 % or more but not more than 22 % of zinc oxide

3824999647 80

- - - - - - Mixed metals oxides, in the form of powder, containing by weight: - either 5 % or more of barium, neodymium or magnesium and 15 % or more of titanium, - or 30 % or more of lead and 5 % or more of niobium, for use in the manufacture of dielectric films or for use as dielectric materials in the manufacture of multilayer ceramic capacitors

3824999648 80

- - - - - - Zirconium oxide (ZrO@2), calcium oxide stabilised (CAS RN 68937-53-1) with a zirconium oxide content by weight of 92 % or more but not more than 97 %

3824999650 80

- - - - - - Nickel hydroxide, doped with 12 % or more but not more than 18 % by weight of zinc hydroxide and cobalt hydroxide, of a kind used to produce positive electrodes for accumulators

3824999653 80

- - - - - - Rare-earth concentrate containing by weight 60 % or more but not more than 95 % of rare-earth oxides and not more than 1 % each of zirconium oxide, aluminium oxide or iron oxide, and having a loss on ignition of 5 % or more by weight

3824999655 80

- - - - - - Carrier in powder form, consisting of: - ferrite (Iron oxide) (CAS RN 1309-37-1) - manganese oxide (CAS RN 1344-43-0) - magnesium oxide (CAS RN 1309-48-4) - styrene acrylate copolymer to be mixed with the toner powder, in the manufacturing of ink/toner filled bottles or cartridges for facsimile machines, computer printers and copiers

3824999657 80

- - - - - - Particles of silicon dioxide on which are covalently bonded organic compounds, for use in the manufacture of high performance liquid chromatography columns (HPLC) and sample preparation cartridges

3824999660 80

- - - - - - Fused magnesia containing by weight 15 % or more of dichromium trioxide

3824999663 80

- - - - - - Catalyst containing by weight of - 52 % (± 10 %) of cuprous oxide (CAS RN 1317-39-1), - 38 % (± 10 %) of cupric oxide (CAS RN 1317-38-0) and - 10 % (± 5 %) of metallic copper (CAS RN 7440-50-8)

3824999665 80

- - - - - - Aluminium sodium silicate, in the form of spheres of a diameter of: - either 1,6mm or more but not more than 3,4mm, - or 4mm or more but not more than 6mm

3824999667 80

- - - - - - Film containing oxides of barium or calcium combined with either oxides of titanium or zirconium, in an acrylic binding material

3824999670 80

- - - - - - Powder containing by weight: - 28 % or more but not more than 51 % of talc (CAS RN 14807-96-6) - 30,5 % or more but not more than 48 % of silicon dioxide (quartz) (CAS RN 14808-60-7) - 17 % or more but not more than 26 % of aluminium oxide (CAS RN 1344-28-1)

3824999673 80

- - - - - - Reaction product, containing by weight: - 1 % or more but not more than 40 % of molybdenum oxide, - 10 % or more but not more than 50 % of nickel oxide, - 30 % or more but not more than 70 % of tungsten oxide

3824999674 80

- - - - - - Mixture with a non-stoichiometric composition: - with a crystalline structure, - with a content of fused magnesia-alumina spinel and with admixtures of silicate phases and aluminates, at least 75 % by weight of which consists of fractions with a grain size of 1-3 mm and at most 25 % consists of fractions with a grain size of 0-1 mm

3824999675 80

- - - - - - Hollow spheres of fused aluminosilicate containing 65-80 % amorphous aluminosilicate, with the following characteristics: - a melting point of between 1 600 °C and 1 800 °C, - a density of 0,6 - 0,8 g/cm$3, for use in the manufacture of particle filters in motor vehicles

3824999677 80

- - - - - - Preparation, consisting of 2,4,7,9-tetramethyldec-5-yne-4,7-diol and silicon dioxide

3824999679 80

- - - - - - Paste containing by weight: - 75 % or more, but not more than 85 % of copper, - inorganic oxides, - ethyl cellulose, and - a solvent

3824999680 80

- - - - - - Mixture consisting of: - 64 % or more, but not more than 74 % by weight of amorphous silica (CAS RN 7631-86-9) - 25 % or more, but not more than 35 % by weight of butanone (CAS RN 78-93-3) and - not more than 1 % by weight of 3-(2,3-epoxypropoxy)propyltrimethoxysilane (CAS RN 2530-83-8)

3824999685 80

- - - - - - Preparation containing: - C,C'-azodi(formamide) (CAS RN 123-77-3), - magnesium oxide (CAS RN 1309-48-4) and - zinc bis(p-toluene sulphinate) (CAS RN 24345-02-6) in which the gas formation from C,C'-azodi(formamide) occurs at 135 °C

3824999687 80

- - - - - - Platinum oxide (CAS RN 12035-82-4) fixed on a porous support of aluminium oxide (CAS RN 1344-28-1), containing by weight: - 0,1 % or more but not more than 1 % of platinum, and - 0,5 % or more but not more than 5 % of ethylaluminium dichloride (CAS RN 563-43-9)

3824999699 80

- - - - - - Other