Tariff number 8501109190 80 - Other

Import trade restrictions for 8501109190 80

This table contains information on trade restrictions for the import of goods into the EU and the EU into third countries. The table contains information on trade restrictions which are imposed due to customs unions, preferences, tariff quotas, customs unions, veterinary controls, third country duties and non-preferential tariff quotas. Our products
	Origin Origin country	Start	Duty / Tax	Legal Legal base Measure type
1011	ERGA OMNES 1011	01-07-2016	0.000 %	Regulation 2658/87 Suspension - goods for certain categories of ships, boats and other vessels and for drilling or production platforms 117

Explanation of trade restrictions

Erga Omnes means "for all".

Third countries are countries that are not part of the EU.

GSP means "Generalised System of Preferences".

GSP Plus means "Generalised System of Preferences Plus".

European Economic Area (EEA) means all EU member states and Iceland, Liechtenstein and Norway.

OCTs stands for "Overseas Countries and Territories". They are countries and territories that are not part of the EU. More information

CARIFORUM is a regional economic integration organisation comprising 15 Caribbean Community (CARICOM) countries and the Dominican Republic.

SADC EPA stands for "Southern African Development Community - Economic Partnership Agreement".

Duty means "customs duties".

History

Duty rates and measures for this code over time (yearly snapshots).

Information

When importing or exporting "Other", it is crucial to have the correct HS code or TARIC code. The HS code 8501109190 80 serves as the standard code for this product, ensuring that the appropriate duties and taxes are applied when crossing international borders.

To ensure your business transactions run smoothly when importing or exporting "Other", consider the following points:

Inform yourself about the specific import and export regulations in the countries involved. This includes possible restrictions, taxes, and duties applicable to "Other".
Check if any additional licenses, permits, or certificates are required to import "Other" into the destination country or export it from the country of origin.
Make sure your trading partners have valid identification numbers, such as EORI numbers (Economic Operators Registration and Identification) in the EU, to streamline trade and minimize delays.
Ensure that all trade- and customs-related documents (such as commercial invoices, packing lists, certificates of origin, and insurance policies) are accurately completed and adhere to the respective national regulations.
Keep an eye on the current exchange rates, as well as packaging, shipping, and insurance costs, to accurately calculate trade costs.

In summary, the HS code or TARIC code for "Other" is 8501109190 80. Make sure you accurately use this code in all your trade and customs documents to guarantee smooth and hassle-free transactions. With these tips, you'll be better prepared for the challenges of international trade and can successfully import and export "Other".

HS Code structure

1. Chapter

There are 21 different sections, which are divided into 96 chapters. Exceptional chapters include chapter 77, which is reserved for future use, chapters 98 and 99, which are limited at national level, and chapter 99, which is a specific code for temporary changes. In the example above, chapter 85 was selected for electrical machinery and equipment and parts thereof; sound recorders and reproducers, television image and sound recorders and reproducers, and parts and accessories of such articles

2. Heading

The heading determines the specific category within a certain chapter. In the example above, the 01 refers to Electric motors and generators (excluding generating sets).

3. Subheading

The last two digits of the international harmonized code are more specific and define subcategories of products. In the example above, the 10 refers to Other.

HS Code tree structure

8500000000 80

Chapter ELECTRICAL MACHINERY AND EQUIPMENT AND PARTS THEREOF; SOUND RECORDERS AND REPRODUCERS, TELEVISION IMAGE AND SOUND RECORDERS AND REPRODUCERS, AND PARTS AND ACCESSORIES OF SUCH ARTICLES

8501000000 80

Electric motors and generators (excluding generating sets)

8501100000 80

- Motors of an output not exceeding 37,5 W

8501101000 80

- - Synchronous motors of an output not exceeding 18 W

8501101010 80

- - - For use in certain types of aircraft

8501101020 80

- - - Synchronous motor for a dishwasher with a water flow control mechanism with - a length without axle of 24 mm (+/- 0,3), - a diameter of 49,3 mm (+/- 0,3) - a rated voltage of 220 V AC or more but not more than 240 V AC, - a rated frequency of 50 Hz or more but not more than 60 Hz, - an input power of not more than 4 W, - a rotation speed of 4rpm or more but not more than 4,8rpm, - an output torque of not less than 10kgf/cm

8501101030 80

- - - Motors for air pumps, with: -operating voltage of 9 VDC or more but not more than 24 VDC, -operating temperature range of -40°C or more but not more than 80°C, -an output not exceeding 18 W for use in the manufacture of pneumatic support and ventilation systems for car seats

8501101040 80

- - - Synchronous hybrid stepper motor with: -an output not exceeding 18 W, -two phases, -a rated current of not more than 2,5 A/phase, -a rated voltage of not more than 20 V, -with or without a threaded shaft, for use in the manufacture of 3D printers

8501101090 80

- - - Other

8501109100 10

- - Other

8501109100 80

- - - Universal AC/DC motors

8501109110 80

- - - - For use in certain types of aircraft

8501109190 80

- - - - Other

8501109300 80

- - - AC motors

8501109310 80

- - - - For use in certain types of aircraft

8501109390 80

- - - - Other

8501109900 80

- - - DC motors

8501109910 80

- - - - For use in certain types of aircraft

8501109956 10

- - - - Other

8501109956 80

- - - - - DC Motor : - with a speed rotation of not more than 7000 rpm (without load), - with a nominal voltage of 12 V (± 4 V), - with a maximum power of 13,78 W ( at 3,09 A), - with a specified temperature range from -40°C to 160°C, - with a gear connection, - with a mechanical attachment interface, - with 2 electrical connections, - with a maximum torque of 100 Nm

8501109958 80

- - - - - DC Motor : - with a speed rotation of not more than 6500 rpm (without load), - with a nominal voltage of 12 V (± 4 V), - with a maximal power below than 20 W, - with a specified temperature range from -40°C to 160°C, - with a worm gear drive, - with a mechanical attachment interface, - with 2 electrical connections, - with a maximum torque of 75 Nm

8501109960 80

- - - - - DC motor - with a rotor speed of 3 500 rpm or more but not more than 5 000 rpm loaded and not more than 6 500 rpm when not loaded - with a power supply voltage of 100 V or more but not more than 240 V for use in the manufacture of electric fryers

8501109964 80

- - - - - DC motor to control angular position of the flap to adjust gas flow in the Air Throttle and EGR valve: -with Ingress Protection (IP) standard of IP69, -with a rotor speed of not more than 6 500 rpm when not loaded, -with a rated voltage of 12,0 V (± 0,1), -of a specified temperature range of - 40 °C or more but not more than 165 °C, -with or without a connecting pinion, -with or without an engine connector, -with or without a flange, -with a diameter of not more than 40 mm (not including the flange), -with an overall height of not more than 90 mm (from the base to the pinion)

8501109965 80

- - - - - Electric turbocharger actuator, with: - a DC motor, - an integrated gear mechanism, - a (pulling)force of 200 N or more at a minimum of 140°C elevated ambient temperature, - a (pulling) force of 250 N or more in each position of its stroke, - an effective stroke of 15 mm or more but not more than 25 mm, - with or without an on-board diagnostics interface

8501109970 80

- - - - - DC stepping motor, with - an angle of step of 7,5 ° (± 0,5 °) - a two-phase winding, - a rated voltage of 9 V or more, but not more than 16,0 V - of a specified temperature range covering at least - 40 °C to + 105 °C - with or without connecting pinion - with or without motor drive connector

8501109975 80

- - - - - Permanently excited DC motor with - a multiple-phase winding - an external diameter of 28 mm or more but not more than 35 mm, - a rated speed of not more than 12 000 rpm, - a power supply voltage of 8 V or more but not more than 27 V

8501109979 80

- - - - - DC motor with brushes and an internal rotor with a three-phase winding, whether or not equipped with a worm, of a specified temperature range covering at least - 20°C to + 70°C

8501109980 80

- - - - - DC stepping motor, with: - an angle of step of 7,5° (± 0,5°), - a pull-out torque at 25 °C of 25 mNm or more, - a pull-out pulse rate of 1 500 pps or more, - a two-phase winding, and - a rated voltage of 10,5 V or more, but not more than 16,0 V

8501109990 80

- - - - - Other

8501200000 80

- Universal AC/DC motors of an output exceeding 37,5 W

8501200010 80

- - Of an output exceeding 735 W but not exceeding 150 kW, for use in civil aircraft

8501200020 80

- - Of an output of less than 750 W or exceeding 150 kW, for use in certain types of aircraft

8501200030 80

- - Universal AC/DC motor with - a rated output of 1,2 kW, - a supply voltage of 230 V, and - engine brake, - assembled to a reduction gear with output shaft, which is contained in a plastic housing for use as electric drive of lawnmower blades

8501200090 80

- - Other

8501310000 10

- Other DC motors; DC generators

8501310000 80

- - Of an output not exceeding 750 W

8501310010 80

- - - Motors of an output exceeding 735 W, DC generators, for use in civil aircraft

8501310020 80

- - - for use in certain types of aircraft

8501310030 10

- - - Other

8501310030 80

- - - - DC motor, brushless, with a three-phase winding, an external diameter of 85 mm or more, but not exceeding 115 mm, a nominal torque of 2.23 Nm (± 1.0 Nm), of an output of more than 120 W but not exceeding 520 W, calculated with 1550 RPM (± 350 RPM) at a supply voltage of 12 V equipped with electronic circuit with sensors using the Hall effect, for use with an electric power steering control module (power steering motor)

8501310037 80

- - - - Permanently excited DC motor with - a multiple-phase winding, - an external diameter of 30 mm or more but not more than 90 mm, including mounting flange, - a rated speed of not more than 15 000 rpm, - an output of 45 W or more but not more than 400 W, and - a supply voltage of 9 V or more but not more than 50 V, - whether or not with a drive disc, - whether or not with a crankcase, - whether or not with a fan, - whether or not with a cap assembly, - whether or not with a sun gear, - whether or not with a speed and rotational direction encoder, - whether or not with or without a speed or rotational direction sensor of resolver type or Hall effect type, - whether or not with a mounting flange

8501310043 80

- - - - Automotive-ready, brushless and permanently excited direct current motor with: -a specified speed of not more than 4 100 rpm, -a minimum output of 400 W, but not more than 1,3 kW (at 12V), -a flange diameter of 85 mm or more but not more than 200 mm, -a maximum length of 335 mm, measured from the beginning of the shaft to the outer ending, -a housing length of not more than 265 mm, measured from the flange to the outer ending, -a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an O-ring and grease), -a stator with single T-tooth design and single coil windings in 9/6 or 12/8 topology, and -surface magnets, -whether or not with electronic power steering controller, -whether or not with pulley, -whether or not with rotor position sensor

8501310045 80

- - - - DC motors, brushless, with: - an external diameter of 90 mm or more, but not more than 110 mm, - a rated speed of not more than 3 680 rpm, - an output of 600 W or more but not more than 740 W at 2 300 rpm and at 80 °C, - a supply voltage of 12 V, - a torque of not more than 5,67 Nm, - a rotor position sensor, - an electronic star-point relay, and - for use with an electric power steering control module

8501310050 80

- - - - DC motors, brushless, with: - an external diameter of 80 mm or more, but not more than 200 mm, - a supply voltage of 9 V or more, but not more than 16 V, - an output at 20 °C of 300 W or more, but not more than 750 W, - a torque at 20 °C of 2,00 Nm or more, but not more than 7,00 Nm, - a rated speed at 20 °C of 600 rpm or more, but not more than 3 100 rpm, - with or without a pulley, - with or without an electronic power steering sensor/controller

8501310055 80

- - - - DC motor with or without commutator, with -an external diameter of 24,2 mm or more, but not more than 140 mm, -a rated speed of 3300 rpm or more, but not more than 26200 rpm, -a rated supply voltage of 3,6 V or more, but not more than 230 V, -an output power of more than 37,5 W , but not more than 2400 W, -a free load current of not more than 20,1 A, -a maximum efficiency of 50 % or more, for driving hand-held power tools or lawn mowers

8501310075 80

- - - - Brushless DC motor assembly comprised of a motor and transmission, with: - electronic control operating by Hall Effect position sensors, - voltage input 9V or more but not more than 16V, - external diameter of the motor 70 mm or more but not more than 80 mm, - output motor power 350 W or more but not more than 550W, - maximum output torque 50 Nm or more but not more than 52 Nm, - maximum output rotation speed 280 rpm or more but not more than 300 rpm, - coaxial male spline outputs of outer diameter 20 mm (±1 mm), 17 teeth and minimum length of teeth 25 mm (± 1 mm), and - with distance between root of splines 119 mm (± 1 mm) for use in the manufacture of all-terrain or utility task vehicles

8501310099 80

- - - - Other

8501320000 80

- - Of an output exceeding 750 W but not exceeding 75 kW

8501320010 80

- - - For use in civil aircraft

8501320040 10

- - - Other

8501320040 80

8501320055 80

8501320099 80

- - - - Other

8501330000 80

- - Of an output exceeding 75 kW but not exceeding 375 kW

8501330010 80

- - - Motors of an output not exceeding 150 kW and generators, for use in civil aircraft

8501330020 80

- - - Of an output exceding 150 kW, for use in certain types of aircraft

8501330030 80

- - - Electric drive for motor vehicles, with an output of not more than 315 kW: - with an AC or DC motor with or without transmission, - with or without power electronics

8501330099 80

- - - Other

8501340000 80

- - Of an output exceeding 375 kW

8501340010 80

- - - Generators for use in civil aircraft

8501340099 80

- - - Other

8501400000 80

- Other AC motors, single-phase

8501402000 80

- - Of an output not exceeding 750 W

8501402010 80

- - - Of an output exceeding 735 W, for use in civil aircraft

8501402020 80

- - - For use in certain types of aircraft

8501402040 80

- - - Electric AC commutator motor, single-phase, with an output of 250 W or more, an input power of 700 W or more but not more than 2 700 W, an external diameter of more than 120 mm (± 0,2 mm) but not more than 135 mm (± 0,2 mm), a rated speed of more than 30 000 rpm but not more than 50 000 rpm, equipped with air-inducting ventilator, for use in the manufacture of vacuum cleaners

8501402080 80

- - - Other

8501408000 80

- - Of an output exceeding 750 W

8501408010 80

- - - Of an output not exceeding 150 kW, for use in civil aircraft

8501408020 80

- - - Of an output exceeding 150 kW, for use in certain types of aircraft

8501408030 80

- - - Electric AC commutator motor, single-phase, with an output of more than 750 W, an input power of 700 W or more but not more than 2 700 W, an external diameter of more than 120 mm (± 0,2 mm) but not more than 135 mm (± 0,2 mm), a rated speed of more than 30 000 rpm but not more than 50 000 rpm, equipped with air-inducting ventilator, for use in the manufacture of vacuum cleaners

8501408050 80

- - - Electric drive for motor vehicles, with an output of not more than 315 kW: - with an AC or DC motor with or without transmission, - with or without power electronics

8501408090 80

- - - Other

8501510000 10

- Other AC motors, multi-phase

8501510000 80

- - Of an output not exceeding 750 W

8501510010 80

- - - Of an output exceeding 735 W, for use in civil aircraft

8501510020 80

- - - Of an output of less than 750 W, for use in certain types of aircraft

8501510030 80

- - - AC synchronous servo motor with resolver and brake for a maximum speed of not more than 6 000 rpm, with: - an output of 340 W or more but not more than 7,4 kW, - a flange of dimensions of not more than 180 mm !x! 180 mm, and - a length from flange to extreme end of resolver of not more than 271 mm

8501510090 80

- - - Other

8501520000 80

- - Of an output exceeding 750 W but not exceeding 75 kW

8501522000 80

- - - Of an output exceeding 750 W but not exceeding 7,5 kW

8501522010 80

- - - - For use in civil aircraft

8501522050 10

- - - - Other

8501522050 80

- - - - - AC synchronous servo motor with resolver and brake for a maximum speed of not more than 6 000 rpm, with: - an output of 340 W or more but not more than 7,4 kW, - a flange of dimensions of not more than 180 mm !x! 180 mm, and - a length from flange to extreme end of resolver of not more than 271 mm

8501522089 80

- - - - - Other

8501523000 80

- - - Of an output exceeding 7,5 kW but not exceeding 37 kW

8501523010 80

- - - - For use in civil aircraft

8501523090 80

- - - - Other

8501529000 80

- - - Of an output exceeding 37 kW but not exceeding 75 kW

8501529010 80

- - - - For use in civil aircraft

8501529090 80

- - - - Other

8501530000 80

- - Of an output exceeding 75 kW

8501535000 80

- - - Traction motors

8501535010 80

- - - - Electric drive for motor vehicles, with an output of not more than 315 kW: - with an AC or DC motor with or without transmission, - with or without power electronics

8501535020 80

- - - - AC traction motor of the Interior Permanent Magnet Synchronous Motor (IPMSM) type with: -a torque output of 200 Nm or more, but not more than 400 Nm, -a power output of 50 kW or more, but not more than 200 kW , -a rotation speed of no more than 15 000 rpm, for use in the manufacture of electric vehicles

8501535090 80

- - - - Other

8501538100 10

- - - Other, of an output

8501538100 80

- - - - Exceeding 75 kW but not exceeding 375 kW

8501538110 80

- - - - - Of an output not exceeding 150 kW, for use in civil aircraft

8501538120 80

- - - - - Of an output exceeding 150 kW, for use in certain types of aircraft

8501538190 80

- - - - - Other

8501539400 80

- - - - Exceeding 375 kW but not exceeding 750 kW

8501539410 80

- - - - - For use in certain types of aircraft

8501539490 80

- - - - - Other

8501539900 80

- - - - Exceeding 750 kW

8501539910 80

- - - - - For use in certain types of aircrafts

8501539990 80

- - - - - Other

8501610000 10

- AC generators (alternators)

8501610000 80

- - Of an output not exceeding 75 kVA

8501612000 80

- - - Of an output not exceeding 7,5 kVA

8501612010 80

- - - - For use in civil aircraft

8501612090 80

- - - - Other

8501618000 80

- - - Of an output exceeding 7,5 kVA but not exceeding 75 kVA

8501618010 80

- - - - For use in civil aircraft

8501618099 80

- - - - Other

8501620000 80

- - Of an output exceeding 75 kVA but not exceeding 375 kVA

8501620010 80

- - - For use in civil aircraft

8501620030 10

- - - Other

8501620030 80

- - - - Fuel cell system - consisting of at least phosphoric acid fuel cells, - in a housing with integrated water management and gas treatment, - for permanent, stationary energy supply

8501620040 80

- - - - AC, 3-phase generator, with: -a continuous power of 147 kVA or more but not more than 222 kVA, -a continuous torque of 650 Nm or more but not more than 900 Nm, -a maximum working speed of 2700 revolutions per minute (rpm), -a liquid cooled system, -a length of 100 mm or more but not more than 200 mm, -a width of 550 mm or more but not more than 650 mm, -a height of 550 mm or more but not more than 650 mm, -weighing of not more than 150 kg

8501620098 80

- - - - Other

8501630000 80

- - Of an output exceeding 375 kVA but not exceeding 750 kVA

8501630010 80

- - - For use in civil aircraft

8501630099 80

- - - Other

8501640000 80

- - Of an output exceeding 750 kVA