New Describe a product, get the CN code. Also as API and MCP for AI agents. Try it free
Jump to content

Tariff number 3907000000 80 - Polyacetals, other polyethers and epoxide resins, in primary forms; polycarbonates, alkyd resins, polyallyl esters and other polyesters, in primary forms

Email me changes

Import trade restrictions for 3907000000 80

This table contains information on trade restrictions for the import of goods into the EU and the EU into third countries. The table contains information on trade restrictions which are imposed due to customs unions, preferences, tariff quotas, customs unions, veterinary controls, third country duties and non-preferential tariff quotas.

Duties 48
1007
EU-Switzerland agreement: re-imported goods 1007
01-01-2007
0 %
Tariff preference 142
CH
Switzerland CH
20-12-1972
0 %
Tariff preference 142
FO
Faroe Islands FO
01-01-1997
0 %
Tariff preference 142
XL
Melilla XL
01-01-1999
0 %
Accession act0001/85
Tariff preference 142
PS
Occupied palestinian Territory PS
01-01-2001
0 %
Tariff preference 142
AD
Andorra AD
01-01-2006
0 %
Customs union duty 106
SM
San Marino SM
01-01-2006
0 %
Customs union duty 106
TR
Türkiye TR
01-01-2006
0 %
Customs union duty 106
2027
GSP+ (incentive arrangement for sustainable development and good governance) 2027
01-01-2014
0 %
Tariff preference 142
2005
GSP-EBA (Special arrangement for the least-developed countries - Everything But Arms) 2005
01-01-2014
0 %
Tariff preference 142
MD
Moldova, Republic of MD
01-01-2016
0 %
Tariff preference 142
EC
Ecuador EC
01-01-2017
0 %
Tariff preference 142
GB
United Kingdom GB
01-01-2021
0 %
Tariff preference 142
2080
OCTs (Overseas Countries and Territories) 2080
01-01-2021
0 %
Tariff preference 142
GH
Ghana GH
01-01-2027
0 %
Tariff preference 142
CL
Chile CL
01-02-2025
0 %
Tariff preference 142
TN
Tunisia TN
01-03-1998
0 %
Tariff preference 142
MA
Morocco MA
01-03-2000
0 %
Tariff preference 142
LB
Lebanon LB
01-04-2006
0 %
Tariff preference 142
JO
Jordan JO
01-05-2002
0 %
Tariff preference 142
EG
Egypt EG
01-06-2004
0 %
Tariff preference 142
XC
Ceuta XC
01-07-1991
0 %
Accession act0001/85
Tariff preference 142
2012
EEA - European Economic Area 2012
01-07-2007
0 %
Tariff preference 142
KR
Korea, Republic of (South Korea) KR
01-07-2014
0 %
Tariff preference 142
MX
Mexico MX
01-07-2016
0 %
Tariff preference 142
KE
Kenya KE
01-07-2024
0 %
Tariff preference 142
US
United States US
01-07-2026
0 %
Tariff preference 142
SY
Syria SY
01-08-1994
0 %
Tariff preference 142
CO
Colombia CO
01-08-2013
0 %
Tariff preference 142
2200
Central America 2200
01-08-2013
0 %
Tariff preference 142
VN
Viet Nam VN
01-08-2020
0 %
Tariff preference 142
DZ
Algeria DZ
01-09-2005
0 %
Tariff preference 142
GE
Georgia GE
01-09-2014
0 %
Tariff preference 142
1011
ERGA OMNES 1011
01-11-2026
2 EUR
Union handling fee 800
1011
ERGA OMNES 1011
01-11-2026
3 EUR
Low-value consignment customs duty 107
CI
Ivory Coast CI
02-12-2019
0 %
Tariff preference 142
2000
Preferential origin in accordance with the Agreement in the form of an Exchange of Letters between the European Union and the Kingdom of Morocco on the amendment of Protocols 1 and 4 to the Euro-Mediterranean Agreement establishing an association between the European Communities and their Member States, of the one part, and the Kingdom of Morocco, of the other part. 2000
03-10-2025
0 %
Tariff preference 142
CM
Cameroon CM
04-08-2014
0 %
Tariff preference 142
1035
SADC EPA 1035
10-10-2016
0 %
Tariff preference 142
ZA
South Africa ZA
10-10-2016
0 %
Tariff preference 142
1034
Eastern and Southern Africa States 1034
14-05-2012
0 %
Tariff preference 142
GH
Ghana GH
15-12-2016
– 31-12-2026
0 %
Tariff preference 142
IL
Israel IL
16-05-2023
0 %
Tariff preference 142
SB
Solomon Islands SB
17-05-2020
0 %
Tariff preference 142
PG
Papua New Guinea PG
20-12-2009
0 %
Tariff preference 142
FJ
Fiji FJ
28-07-2014
0 %
Tariff preference 142
1033
CARIFORUM 1033
29-12-2008
0 %
Tariff preference 142
WS
Samoa WS
31-12-2018
0 %
Tariff preference 142
Controls and documents 5
RU
Russian Federation RU
19-12-2023
– 31-12-2027
Document required
banned without it
Import control 762
BY
Belarus BY
25-02-2025
Document required
banned without it
Import control 760
1011
ERGA OMNES 1011
25-06-2025
Document required
banned without it
Import control of fluorinated greenhouse gases 724
UA
Ukraine UA
24-06-2026
Document required
banned without it
Import control 762
UA
Ukraine UA
24-06-2026
Document required
banned without it
Import control 760

Explanation of trade restrictions

Erga Omnes means "for all".

Third countries are countries that are not part of the EU.

GSP means "Generalised System of Preferences".

GSP Plus means "Generalised System of Preferences Plus".

European Economic Area (EEA) means all EU member states and Iceland, Liechtenstein and Norway.

OCTs stands for "Overseas Countries and Territories". They are countries and territories that are not part of the EU. More information

CARIFORUM is a regional economic integration organisation comprising 15 Caribbean Community (CARICOM) countries and the Dominican Republic.

SADC EPA stands for "Southern African Development Community - Economic Partnership Agreement".

Duty means "customs duties".

Estimate the import cost for 3907000000

  • Customs value €1,000.00
  • No third-country duty is recorded for this origin.
  • Import VAT 19 % €190.00
  • Total €1,190.00

Documents and checks for China

An estimate only. The customs value is the price including transport and insurance to the EU border. Excise duties, other fees and producer-specific anti-dumping rates are not included. Preferential rates need valid proof of origin. Country groups and exclusions: TARIC, as of November 2026.

Export measures for 3907000000

What applies when these goods leave the EU: export controls, dual-use and other authorisations, bans per destination and the supplementary unit of the export declaration.

Controls and documents 1
1008
All third countries 1008
12-03-2025
Document required
banned without it
Export control of fluorinated greenhouse gases 765

History

Duty rates and measures for this code over time (yearly snapshots).

Preferential rules of origin for 3907000000

What the goods must meet to count as originating in a partner country and get the preferential duty, per agreement.

  • EU-Egypt Association Agreement · Egypt

    EU-Morocco Association Agreement · Morocco

    Plastics in primary forms, waste, parings and scrap, of plastic; except for headings ex3907 and 3912 for which the rules are set out below:

    – Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [13] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

    – Other / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [14] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

    – Copolymer, made from polycarbonate and acrylonitrile-butadiene-styrene copolymer (ABS) / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product [15]

    – Polyester / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product and/or manufacture from polycarbonate of tetrabromo-(bisphenol A)

  • Autonomous Trade Preferences (Western Balkans) · Kosovo

    Plastics in primary forms, waste, parings and scrap, of plastic; except for headings ex39 07 and 3912 for which the rules are set out below:

    - Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [13] / or: Manufacture in which the value of al the materials used does not exceed 25 % of the ex-works price of the product

    - Other / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [14] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

    - Copolymer, made from polycarbonate and acrylonitrile-butadiene-styrene copolymer (ABS) / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product [15]

    - Polyester / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex works price of the product and/or manufacture from polycarbonate of tetrabromo-(bisphenol A)

  • EU-Canada CETA · Canada

    A change from any other heading; or A change from within any one of these headings, whether or not there is also a change from any other heading, provided that the value of non-originating materials classified in the same heading as the final product does not exceed 50 per cent of the transaction value or ex-works price of the product; or A change from within any one of these headings, whether or not there is also a change from any other heading, provided that the net weight of non-originating material classified in the same heading as the final product does not exceed 50 per cent of the net weight of the product.

  • EU-Chile Association Agreement · Chile

    Plastics in primary forms, waste, parings and scrap, of plastic; except for headings ex39 07 and 3912 for which the rules are set out below: — Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [13] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product — Other / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [14] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

    — Copolymer, made from polycarbonate and acrylonitrile-butadiene-styrene copolymer (ABS) / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product [15]

    — Polyester / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product and/or manufacture from polycarbonate of tetrabromo-(bisphenol A)

  • EU-Colombia/Peru/Ecuador Trade Agreement · Colombia, Ecuador, Peru

    Copolymer, made from polycarbonate and acrylonitrile-butadiene-styrene copolymer (ABS); polyethers of subheading 3907.20 except polyacetals; epoxide resins of subheading 3907.30; polycarbonates of subheading 3907.40; unsaturated polyesters of subheading 3907.91 / or: Manufacture from materials of any heading / or: Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

    Other / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 per cent of the ex-works price of the product, or Manufacture from polycarbonate of tetrabromo (bisphenol A) of subheading 3907.40 / or: Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

  • EU-Algeria Association Agreement · Algeria

    Plastics in primary forms, waste, parings and scrap, of plastic; except for headings ex3907 and 3912 for which the rules are set out below:

    – Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product,

    and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [13] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [14] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

    – Copolymer, made from polycarbonate and acrylonitrile-butadiene-styrene copolymer (ABS) / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product [15]

    – Polyester / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product and/or manufacture from polycarbonate of tetrabromo-(bisphenol A)

  • EPA CARIFORUM

    – Copolymer, made from polycarbonate and acrylonitrile-butadiene-styrene copolymer (ABS) / or: Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 50 % of the ex-works price of the product (e) – Polyester / or: Manufacture in which the value of any materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product and/or manufacture from polycarbonate of tetrabromo-(bisphenol A)

  • EU Market Access Regulation (EPA) · Cameroon, Côte d’Ivoire, Ghana, Kenya

    – Copolymer, made from polycarbonate and acrylonitrile-butadiene-styrene copolymer (ABS) / or: Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 50 % of the ex-works price of the product [16]

    – Polyester / or: Manufacture in which the value of any materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product and/or manufacture from polycarbonate of tetrabromo-(bisphenol A)

  • Generalised Scheme of Preferences (GSP, GSP+, EBA) · Armenia, India, Kenya, Pakistan, Samoa, Solomon Islands, Syria, Vietnam

    – Copolymer, made from polycarbonate and acrylonitrile-butadiene-styrene copolymer (ABS) / or: (a) LDCs Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product [22] or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product / or: (b) Other beneficiary countries Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product [23] or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

    – Polyester / or: (a) LDCs Manufacture from materials of any heading, except that of the product or Manufacture from polycarbonate of tetrabromo-(bisphenol A) or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product / or: (b) Other beneficiary countries Manufacture from materials of any heading, except that of the product or Manufacture from polycarbonate of tetrabromo-(bisphenol A) or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

  • EU-Jordan Association Agreement · Jordan

    Plastics in primary forms, waste, parings and scrap, of plastic; except for headings ex 3907 and 3912 for which the rules are set out below: - Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [13] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product - Other / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [14] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product - Copolymer, made from polycarbonate and acrylonitrile-butadiene-styrene copolymer (ABS) / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product [15] - Polyester / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product and/or manufacture from polycarbonate of tetrabromo-(bisphenol A)

  • EU-Japan EPA · Japan

    CTH; MaxNOM 50 % (EXW); or RVC 55 % (FOB).

  • EU-Korea FTA · South Korea

    Plastics in primary forms, waste, parings and scrap, of plastic; semi-manufactures and articles of plastics / or: Manufacture from materials of any heading, except that of the product / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  • EU-Lebanon Association Agreement · Lebanon

    Plastics in primary forms, waste, parings and scrap, of plastic; except for headings ex3907 and 3912 for which the rules are set out below:

    – Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [13] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

    – Other / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [14] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

    – Copolymer, made from polycarbonate and acrylonitrile-butadiene-styrene copolymer (ABS) / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product [15]

    – Polyester / or: Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product and/or manufacture from polycarbonate of tetrabromo-(bisphenol A)

  • EU-Mexico Global Agreement · Mexico

    Polyacetals, other polyethers and epoxide resins, in primary forms, polycarbonates, alkyd resins, polyallyl esters and other polyesters, in primary forms — Copolymer, made from polycarbonate and acrylonitrile-butadiene-styrene copolymer (ABS) / or: Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 50 % of the ex-works price of the product [18] — Polyester / or: Manufacture in which all the materials used are classified within a Chapter other than Chapter 39. However, materials of Chapter 39 may be used, provided their value does not exceed 20 % of the ex-works price of the product and/or manufacture from polycarbonate of tetrabromo-(bisphenol A) — Other / or: Manufacture in which all the materials used are classified within a Chapter other than Chapter 39. However, materials classified within Chapter 39 may be used, provided their value does not exceed 20 % of the ex-works price of the product [19] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

  • EU-Palestine Interim Association Agreement · Palestine

    Plastics in primary forms, waste, parings and scrap, of plastic; except for heading Nos ex 3907 and 3912 for which the rules are set out below: - Addition homopolymerization products in which a single monomer contributes more than 99% by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50% of the ex-works price of the product; the value of any materials of Chapter 39 used does not exceed 20% of the ex-works price of the product [1] / or: Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product - Other / or: Manufacture in which the value of the materials of Chapter 39 used does not exceed 20% of the ex-works price of the product 1 / or: Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product

    - Copolymer, made from polycarbonate and acrylonitrile-butadiene-styrene copolymer (ABS) / or: Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 50% of the ex-works price of the product 1 - Polyester / or: Manufacture in which the value of any materials of Chapter 39 used does not exceed 20% of the ex-works price of the product and/or manufacture from polycarbonate of tetrabromo-(bisphenol A)

  • EU-Singapore FTA · Singapore

    Copolymer, made from polycarbonate and acrylonitrile-butadiene-styrene copolymer (ABS) / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product [21] or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

    Polyester / or: Manufacture from materials of any heading, except that of the product or Manufacture from polycarbonate of tetrabromo-(bisphenol A) or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

  • EU-Tunisia Association Agreement · Tunisia

    Plastics in primary forms, waste, parings and scrap, of plastic; except for headings ex 3907 and 3912 for which the rules are set out below: Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content / or: Manufacture in which: the value of all the materials used does not exceed 50 % of the ex-works price of the product, and within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [13] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product [14] / or: Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

    Copolymer, made from polycarbonate and acrylonitrile-butadiene-styrene copolymer (ABS) / or: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product [15] Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product and/or manufacture from polycarbonate of tetrabromo-(bisphenol A)

Source: European Commission, Access2Markets (CC BY 4.0, shortened). The text of the agreement prevails. Access2Markets

Legal and explanatory notes for 3907000000

3907 CN Explanatory Notes: Polyacetals, other polyethers and epoxide resins, in primary forms; polycarbonates, alkyd resins, polyallyl esters and other polyesters, in primary forms

For the definition of the prefix ‘poly’, in the sense of this heading, see subheading note 1(a)(1) to this chapter.

3907 40 00 CN Explanatory Notes: Polycarbonates

This subheading includes copolymers containing a component formed by a polycarbonate and a component formed by poly(ethylene terephthalate) if the polycarbonate predominates (see the HS General Explanatory Note to the subheadings of this chapter, (B), (1), sixth paragraph).

3907 61 00 CN Explanatory Notes: Having a viscosity number of 78 ml/g or higher

Poly(ethylene terephthalate) having a viscosity number of 78 ml/g or higher is generally used for the production of bottles. The viscosity number is calculated in accordance with ISO Standard 1628-5, using dichloroacetic acid as solvent.

3907 69 00 CN Explanatory Notes: and 3907 69 00

Poly(ethylene terephthalate) The explanatory note to subheadings 3901 10 10 and 3901 10 90 applies, mutatis mutandis. These subheadings include copolymers containing a component formed by a polycarbonate and a component formed by poly(ethylene terephthalate) if the poly(ethylene terephthalate) predominates (see the HS General Explanatory Note to the subheadings of this chapter, (B), (1), sixth paragraph). These subheadings also include copolymers of terephthalic acid, ethylene glycol and one or more other diols, such as cyclohexane dimethanol or neopentyl glycol, provided that monomer units of polyethylene terephthalate predominate by weight in the copolymer. Polyester products in which monomer units of polyethylene terephthalate do not predominate by weight in the copolymer shall be classified as other polyesters (subheading 3907 99)

3907 20 11 - 3907 20 99 CN Explanatory Notes: to 3907 20 99

Other polyethers These subheadings also include chemically modified polyethers (other than polyacetals) (see the HS Explanatory Note to heading 3907, (2)).

Notes to chapter 39

Notes 1. Throughout the nomenclature, the expression ‘plastics’ means those materials of headings 3901 to 3914 which are or have been capable, either at the moment of polymerisation or at some subsequent stage, of being formed under external influence (usually heat and pressure, if necessary with a solvent or plasticiser) by moulding, casting, extruding, rolling or other process into shapes which are retained on the removal of the external influence. Throughout the nomenclature, any reference to ‘plastics’ also includes vulcanised fibre. The expression, however, does not apply to materials regarded as textile materials of Section XI. 2. This chapter does not cover: (a) lubricating preparations of heading 2710 or 3403; (b) waxes of heading 2712 or 3404; (c) separate chemically defined organic compounds (Chapter 29); (d) heparin or its salts (heading 3001); (e) solutions (other than collodions) consisting of any of the products specified in headings 3901 to 3913 in volatile organic solvents when the weight of the solvent exceeds 50 % of the weight of the solution (heading 3208); stamping foils of heading 3212; (f) organic surface-active agents or preparations of heading 3402; (g) run gums or ester gums (heading 3806); (h) prepared additives for mineral oils (including gasoline) or for other liquids used for the same purposes as mineral oils (heading 3811); (ij) prepared hydraulic fluids based on polyglycols, silicones or other polymers of Chapter 39 (heading 3819); (k) diagnostic or laboratory reagents on a backing of plastics (heading 3822); (l) synthetic rubber, as defined for the purposes of Chapter 40, or articles thereof; (m) saddlery or harness (heading 4201) or trunks, suitcases, handbags or other containers of heading 4202; (n) plaits, wickerwork or other articles of Chapter 46; (o) wallcoverings of heading 4814; (p) goods of Section XI (textiles and textile articles); (q) articles of Section XII (for example, footwear, headgear, umbrellas, sun umbrellas, walking sticks, whips, riding-crops or parts thereof); (r) imitation jewellery of heading 7117; (s) articles of Section XVI (machines and mechanical or electrical appliances); (t) parts of aircraft or vehicles of Section XVII; (u) articles of Chapter 90 (for example, optical elements, spectacle frames, drawing instruments); (v) articles of Chapter 91 (for example, clock or watch cases); (w) articles of Chapter 92 (for example, musical instruments or parts thereof); (x) articles of Chapter 94 (for example, furniture, luminaires and lighting fittings, illuminated signs, prefabricated buildings); (y) articles of Chapter 95 (for example, toys, games, sports requisites); or (z) articles of Chapter 96 (for example, brushes, buttons, slide fasteners, combs, mouthpieces or stems for smoking pipes, cigarette-holders or the like, parts of vacuum flasks or the like, pens, propelling pencils, and monopods, bipods, tripods and similar articles). 3. Headings 3901 to 3911 apply only to goods of a kind produced by chemical synthesis, falling in the following categories: (a) liquid synthetic polyolefins of which less than 60 % by volume distils at 300 °C, after conversion to 1 013 mbar when a reduced-pressure distillation method is used (headings 3901 and 3902); (b) resins, not highly polymerised, of the coumarone-indene type (heading 3911); (c) other synthetic polymers with an average of at least five monomer units; (d) silicones (heading 3910); (e) resols (heading 3909) and other prepolymers. 4. The expression ‘copolymers’ covers all polymers in which no single monomer unit contributes 95 % or more by weight to the total polymer content. For the purposes of this chapter, except where the context otherwise requires, copolymers (including co-polycondensates, co-polyaddition products, block copolymers and graft copolymers) and polymer blends are to be classified in the heading covering polymers of that comonomer unit which predominates by weight over every other single comonomer unit. For the purposes of this note, constituent comonomer units of polymers falling in the same heading shall be taken together. If no single comonomer unit predominates, copolymers or polymer blends, as the case may be, are to be classified in the heading which occurs last in numerical order among those which equally merit consideration. 5. Chemically modified polymers, that is those in which only appendages to the main polymer chain have been changed by chemical reaction, are to be classified in the heading appropriate to the unmodified polymer. This provision does not apply to graft copolymers. 6. In headings 3901 to 3914, the expression ‘primary forms’ applies only to the following forms: (a) liquids and pastes, including dispersions (emulsions and suspensions) and solutions; (b) blocks of irregular shape, lumps, powders (including moulding powders), granules, flakes and similar bulk forms. 7. Heading 3915 does not apply to waste, parings and scrap of a single thermoplastic material, transformed into primary forms (headings 3901 to 3914). 8. For the purposes of heading 3917, the expression ‘tubes, pipes and hoses’ means hollow products, whether semi-manufactured or finished products, of a kind generally used for conveying, conducting or distributing gases or liquids (for example, ribbed garden hose, perforated tubes). This expression also includes sausage casings and other lay-flat tubing. However, except for the last mentioned, those having an internal cross-section other than round, oval, rectangular (in which the length does not exceed one-and-a-half times the width) or in the shape of a regular polygon are not to be regarded as tubes, pipes and hoses but as profile shapes. 9. For the purposes of heading 3918, the expression ‘wall or ceiling coverings of plastics’ applies to products in rolls, of a width not less than 45 cm, suitable for wall or ceiling decoration, consisting of plastics fixed permanently on a backing of any material other than paper, the layer of plastics (on the face side) being grained, embossed, coloured, design-printed or otherwise decorated. 10. In headings 3920 and 3921, the expression ‘plates, sheets, film, foil and strip’ applies only to plates, sheets, film, foil and strip (other than those of Chapter 54) and to blocks of regular geometric shape, whether or not printed or otherwise surface-worked, uncut or cut into rectangles (including squares) but not further worked (even if when so cut they become articles ready for use). 11. Heading 3925 applies only to the following articles, not being products covered by any of the earlier headings of sub-chapter II: (a) reservoirs, tanks (including septic tanks), vats and similar containers, of a capacity exceeding 300 litres; (b) structural elements used, for example, in floors, walls or partitions, ceilings or roofs; (c) gutters and fittings therefor; (d) doors, windows and their frames and thresholds for doors; (e) balconies, balustrades, fencing, gates and similar barriers; (f) shutters, blinds (including venetian blinds) and similar articles and parts and fittings thereof; (g) large-scale shelving for assembly and permanent installation, for example, in shops, workshops, warehouses; (h) ornamental architectural features, for example, flutings, cupolas, dovecotes; and (ij) fittings and mountings intended for permanent installation in or on doors, windows, staircases, walls or other parts of buildings, for example, knobs, handles, hooks, brackets, towel rails, switch-plates and other protective plates. Subheading notes 1. Within any one heading of this chapter, polymers (including copolymers) and chemically modified polymers are to be classified according to the following provisions: (a) where there is a subheading named ‘Other’ in the same series: (1) the designation in a subheading of a polymer by the prefix ‘poly’ (for example, polyethylene and polyamide-6,6) means that the constituent monomer unit or monomer units of the named polymer taken together must contribute 95 % or more by weight of the total polymer content; (2) the copolymers named in subheadings 3901 30, 3901 40, 3903 20, 3903 30 and 3904 30 are to be classified in those subheadings, provided that the comonomer units of the named copolymers contribute 95 % or more by weight of the total polymer content; (3) chemically modified polymers are to be classified in the subheading named ‘Other’, provided that the chemically modified polymers are not more specifically covered by another subheading; (4) polymers not meeting (1), (2) or (3) above, are to be classified in the subheading, among the remaining subheadings in the series, covering polymers of that monomer unit which predominates by weight over every other single comonomer unit. For this purpose, constituent monomer units of polymers falling in the same subheading shall be taken together. Only the constituent comonomer units of the polymers in the series of subheadings under consideration are to be compared; (b) where there is no subheading named ‘Other’ in the same series: (1) polymers are to be classified in the subheading covering polymers of that monomer unit which predominates by weight over every other single comonomer unit. For this purpose, constituent monomer units of polymers falling in the same subheading shall be taken together. Only the constituent comonomer units of the polymers in the series under consideration are to be compared; (2) chemically modified polymers are to be classified in the subheading appropriate to the unmodified polymer. Polymer blends are to be classified in the same subheading as polymers of the same monomer units in the same proportions. 2. For the purposes of subheading 3920 43, the term ‘plasticisers’ includes secondary plasticisers. Additional note 1. Where the woven, knitted or crocheted fabrics, felt or nonwovens are present merely for reinforcing purposes, gloves, mittens or mitts impregnated, coated or covered with cellular plastics belong to Chapter 39, even if they are: — made up from woven, knitted or crocheted fabrics (other than those of heading 5903), felt or nonwovens impregnated, coated or covered with cellular plastics, or — made up from unimpregnated, uncoated or uncovered woven, knitted or crocheted fabrics, felt or nonwovens and subsequently impregnated, coated or covered with cellular plastics. (Note 3(c) to Chapter 56 and note 2(a)(5) to Chapter 59).

Notes to section VII

PLASTICS AND ARTICLES THEREOF; RUBBER AND ARTICLES THEREOF Notes 1. Goods put up in sets consisting of two or more separate constituents, some or all of which fall in this section and are intended to be mixed together to obtain a product of Section VI or VII, are to be classified in the heading appropriate to that product, provided that the constituents are: (a) having regard to the manner in which they are put up, clearly identifiable as being intended to be used together without first being repacked; (b) presented together; and (c) identifiable, whether by their nature or by the relative proportions in which they are present, as being complementary one to another. 2. Except for the goods of heading 3918 or 3919, plastics, rubber, and articles thereof, printed with motifs, characters or pictorial representations, which are not merely subsidiary to the primary use of the goods, fall in Chapter 49.

Other explanatory notes for the chapter

General The HS Explanatory Note to Chapter 39, General, ‘Combinations of plastics and materials other than textiles’, point (d), applies, mutatis mutandis, to combinations of carbon fibres and plastics.

Note 4 Calculation of mass ratios of monomer units in copolymers: The mass ratios of the respective monomer units in copolymer chains are calculated based on the molecular structure of the copolymer (not the starting materials), taking into account the formation reaction of the polymer. When applicable, the atom linking two adjacent monomer units is attributed to the monomer unit from which the atom originates. The following examples illustrate the calculation of the monomer unit content in copolymers: — In poly(ethylene terephthalate), which is a polyester comprised of terephthalic acid and ethylene glycol moieties, both alcoholic oxygens are attributed to the glycol monomer unit. Hence, ethylene glycol is calculated as C2H4O2, and terephthalate is calculated as C8H4O2. — In polyamide-6,6, which is a polyamide comprised of hexamethylenediamine and adipic acid, both nitrogen atoms are attributed to the diamine monomer unit. Hence, hexamethylenediamine is calculated as C6H14N2 and adipic acid is calculated as C6H8O2.

Note 6 The term ‘solutions’, used both in this note and in note 4 to Chapter 32, does not apply to colloidal solutions.

Sources: Combined Nomenclature 2026, Annex I to Regulation (EEC) No 2658/87 (CELEX 32025R1926), and the Explanatory Notes to the Combined Nomenclature (CELEX 02019XC0329(02)-20260213). The section and chapter notes are legally binding; the explanatory notes are guidance. EUR-Lex

EU classification regulations for 3907000000

Commission regulations that classified specific goods under this code. They bind customs in every member state for identical goods.

  • 3907 40 00 Dec 20, 1988 · Regulation on EUR-Lex

    Polycarbonate of tetrabromo-(bisphenol A) having an average molecular weight of 3 000

    Reasons

    Classification is determined by the provisions of general rules 1 and 6, note 3 (c) to Chapter 39 and the texts of CN codes 3907 and 3907 40 00

UK advance tariff rulings for 3907000000

Rulings of HM Revenue & Customs for goods with UK commodity codes that start like this EU code. The UK tariff differs from the EU tariff, so these rulings are guidance for the EU.

  • UK 3907100000 Valid Jun 18, 2026 to Jun 17, 2029 · Ruling 600015622 on GOV.UK

    Polydextrose, used in food industry as a thickener, sweetener, and also as a form dietary fibre as it is not digested or effectively by the body. It is a synthesised, non-naturally occurring polymer composed of glucose (dextrose) monomers, connected by glycosidic bonds. It is produced from glucose, citric acid, and sorbitol. It is in the form of a white or off-white powder, and is packed in 25kg Paper/plastic bags with polythene inners for transport and storage.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product to Heading 3907 - Polyacetals, other polyethers and epoxide resins, in primary forms; polycarbonates, alkyd resins, polyallyl esters and other polyesters, in primary forms GIR 5B has been used to determine the packaging - 25kg bag of paper-polymer blend with a polythene plastic inner, for transport and storage. GIR 6 has been used to classify this product to sub-heading level 390710 - Polyacetals Also classified in accordance with: Harmonised System Explanatory Note (HSEN) to heading 3907 Chapter Note 6 to Chapter 39

  • UK 3907299990 Valid May 8, 2025 to May 7, 2028 · Ruling 600012464 on GOV.UK

    The product is used as a processing aid for carbonated beverages. It is made from Polysorbate 65 (Polyoxyethylene (20) Sorbitan Tristearate) and water. Polysorbate 65 primarily acts as a surfactant, emulsifier, solubilizer, and dispersing agent in various applications, including food, cosmetics, and pharmaceuticals. It helps mix oil and water, solubilize ingredients, and distribute substances evenly, making it a versatile ingredient for a range of products. It is used to controls foam during the filling process of carbonated beverages. This ingredient coats the bubbles as a drink is opened, making them smaller and denser, stopping them from merging and creating bigger. This ingredient helps keep the bubbles in the liquid and reduces the amount of foam and CO2 lost in drinks. The product is packaged in 1 ltr PET bottle and boxed or shrink wrapped, in units of 6.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3(1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 3907 - Polyacetals, other polyethers and epoxide resins, in primary forms; polycarbonates, alkyd resins, polyallyl esters and other polyesters, in primary forms. GIR 5b has been used to identify the type of packaging – packaged poly bottles. GIR 6 has been used to classify the goods to subheading level 390729 – Other polyethers; Other than bis(Polyoxyethylene) methylphosphonate. 8-digit code 39072999 - Other than polyether alcohols; Other than copolymer of 1-chloro-2.3-epoxypropane with ethylene oxide. 10-digit code 3907299990 – Other than …

  • UK 3907300080 Valid Mar 21, 2025 to Mar 20, 2028 · Ruling 600011952 on GOV.UK

    Bisphenol F epoxy resin Physical state: liquid It primarily used in high-end fields such as wind turbine blade prepreg, electronic encapsulation materials, vinyl resins, coatings, carbon fibre composites, inks, etc Material can be packed in drums, IBC`s or delivered in ISO tanks.

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 3907 - Polyacetals, other polyethers and epoxide resins, in primary forms; polycarbonates, alkyd resins, polyallyl esters and other polyesters, in primary forms GIR 5b has been used to identify the type of packaging – in drums, IBC`s or delivered in ISO tanks. GIR 6 has been used to classify the goods to subheading level 390730 – Epoxide resins 10 digit code 3907300080 – Products containing more than 35% by weight of epoxy resins, also known as epoxide resins or polyepoxides, which are polymers or prepolymers containing reactive epoxy groups, based on …

+ 9 more
  • UK 3907300080 Valid Apr 22, 2025 to Apr 21, 2028 · Ruling 600011953 on GOV.UK

    Bisphenol F epoxy resin It primarily used in high-end fields such as wind turbine blade prepreg, electronic encapsulation materials, vinyl resins, coatings, carbon fibre composites, inks, etc Material can be packed in drums, IBC`s or delivered in ISO tanks.

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 3907 - Polyacetals, other polyethers and epoxide resins, in primary forms; polycarbonates, alkyd resins, polyallyl esters and other polyesters, in primary forms GIR 5b has been used to identify the type of packaging – in drums, IBC`s or delivered in ISO tanks. GIR 6 has been used to classify the goods to subheading level 390730 – Epoxide resins 10 digit code 3907300080 – Products containing more than 35% by weight of epoxy resins, also known as epoxide resins or polyepoxides, which are polymers or prepolymers containing reactive epoxy groups, based on …

  • UK 3907300080 Valid Mar 21, 2025 to Mar 20, 2028 · Ruling 600011954 on GOV.UK

    Bisphenol F Epoxy Resin Physical state: a liquid Primarily used in high-end fields such as wind turbine blade prepreg, electronic encapsulation materials, vinyl resins, coatings, carbon fibre composites, inks, etc Material can be packed in drums, IBC`s or delivered in ISO tanks

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 3907 - Polyacetals, other polyethers and epoxide resins, in primary forms; polycarbonates, alkyd resins, polyallyl esters and other polyesters, in primary forms GIR 5b has been used to identify the type of packaging – in drums, IBC`s or delivered in ISO tanks. GIR 6 has been used to classify the goods to subheading level 390730 – Epoxide resins 10 digit code 3907300080 – Products containing more than 35% by weight of epoxy resins, also known as epoxide resins or polyepoxides, which are polymers or prepolymers containing reactive epoxy groups, based on …

  • UK 3907300080 Valid Mar 3, 2025 to Mar 2, 2028 · Ruling 600012188 on GOV.UK

    2 component solvent free epoxy coating Blend of epoxy resins and fillers, combined with a small combination of polyamide curatives Over 65% of the formulation is based on epoxy resins The base component of the product is packed in a 20ltr tinplate pail with lid. The activator component is packed in 1ltr plastic jerry cans.

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 3907 - Polyacetals, other polyethers and epoxide resins, in primary forms; polycarbonates, alkyd resins, polyallyl esters and other polyesters, in primary forms GIR 5b has been used to identify the type of packaging – 20 ltr tinplate pail with lid. The activator component is packed in 1 ltr plastic jerry cans. GIR 6 has been used to classify the goods to subheading level 390730 – Epoxide resins 10 digit code 3907300080 – Other; Products containing more than 35% by weight of epoxy resins, also known as epoxide resins or polyepoxides, which are polymers …

  • UK 3907300080 Valid Mar 3, 2025 to Mar 2, 2028 · Ruling 600012191 on GOV.UK

    2 component solvent free epoxy based metal filled repair paste The product is based on epoxy resin filled with fine metal powders and polyamide curatives The product is packed in white plastic containers ranging from 150gm to 30kg

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 3907 - Polyacetals, other polyethers and epoxide resins, in primary forms; polycarbonates, alkyd resins, polyallyl esters and other polyesters, in primary forms GIR 5b has been used to identify the type of packaging – white plastic containers ranging from 150gm to 30kg GIR 6 has been used to classify the goods to subheading level 390730 – Epoxide resins 10 digit code 3907300080 – Other; Products containing more than 35% by weight of epoxy resins, also known as epoxide resins or polyepoxides, which are polymers or prepolymers containing reactive epoxy …

  • UK 3907300080 Valid Apr 14, 2026 to Apr 13, 2029 · Ruling 600014526 on GOV.UK

    Epoxy Resin derived from Epichlorohydrin & Bisphenol-A. The resin has applications in the manufacture of composites, specialist coatings, adhesives, electronics, and abrasives. It is not put up for retail sale. Packaged in 25kg plastic bags, 500kg plastic bags, and 220kg drums for transport and storage.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product to Heading 3907 - Polyacetals, other polyethers and epoxide resins, in primary forms; polycarbonates, alkyd resins, polyallyl esters and other polyesters, in primary forms GIR 5B has been used to determine the packaging - 25kg plastic bags, 500kg plastic bags, and 220kg drums for transport and storage GIR 6 has been used to classify this product to sub-heading level 390730 - Epoxide resins 10 Digit Code 3907300080 - Other than elsewhere specified in this sub-heading; Products containing more than 35% by weight of epoxy resins, also known as epoxide resins or polyepoxides, …

  • UK 3907690090 Valid Jan 2, 2025 to Jan 1, 2028 · Ruling 600012052 on GOV.UK

    polyethylene terephthalate (PET) used to make new products such as water bottles, food packaging, fabric and reusable bags packaged in a variety of ways that includes grounding into flakes

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 3907 - Polyacetals, other polyethers and epoxide resins, in primary forms; polycarbonates, alkyd resins, polyallyl esters and other polyesters, in primary forms GIR 5b has been used to identify the type of packaging – in a variety of ways that includes grounding into flakes GIR 6 has been used to classify the goods to subheading level 390769 – Poly(ethylene terephthalate); Other than having a viscosity number of 78 ml/g or higher 10 digit code 3907690090 – Other than copolymer of terephthalic acid and isophthalic acid with ethylene glycol, …

  • UK 3907690090 Valid Dec 4, 2025 to Dec 3, 2028 · Ruling 600014146 on GOV.UK

    Glitter this is made from Poly(ethylene terephthalate).This is packed in pots weighing 500g. Available in gold and silver.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg. 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect: a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg. 3(1)(b)). General Interpretative Rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 3907 Polyacetals, other polyethers and epoxide resins, in primary forms; polycarbonates, alkyd resins, polyallyl esters and other polyesters, in primary forms GIR 5 (b) - Has been used to identify the type of packaging – plastic pots GIR 6 - Has been used to classify the goods to subheading level 390769 Poly(ethylene terephthalate); Other than Having a viscosity number of 78 ml/g or higher 10 Digit Code 3907690090 Other than Copolymer of terephthalic acid and isophthalic acid with ethylene glycol, butane-1.4-diol and hexane-1.6-diol Also …

  • UK 3907911000 Valid Jun 26, 2024 to Jun 25, 2027 · Ruling 600010228 on GOV.UK

    Castor Polyol Chemically modified castor oil use: production of polyurethane The product is packaged in 1000kg IBC's or 200kg drums

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 3907 - Polyacetals, other polyethers and epoxide resins, in primary forms; polycarbonates, alkyd resins, polyallyl esters and other polyesters, in primary forms GIR 5b has been used to identify the type of packaging – The product is packaged in 1000kg IBC's or 200kg drums GIR 6 has been used to classify the goods to subheading level 390791 – Other polyesters: unsaturated 8 digit code 39079110 - liquid Also classified in accordance with: Chapter 39 notes 1,4 and 6

  • UK 3907911000 Valid Jun 26, 2024 to Jun 25, 2027 · Ruling 600010353 on GOV.UK

    Castor polyol D-1145 Chemically modified castor oil use: production of polyurethane The product is packaged in 1000kg IBCs or 200kg drums

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1 has been used to classify this product by the terms of heading 3907 - Polyacetals, other polyethers and epoxide resins, in primary forms; polycarbonates, alkyd resins, polyallyl esters and other polyesters, in primary forms GIR 5b has been used to identify the type of packaging – The product is packaged in 1000kg IBC's or 200kg drums GIR 6 has been used to classify the goods to subheading level 390791 – Other polyesters: unsaturated 8 digit code 39079110 - liquid Also classified in accordance with: Chapter 39 notes 1,4 and 6

Source: HM Revenue & Customs, Advance Tariff Rulings. Contains public sector information licensed under the Open Government Licence v3.0.

Restrictions and flags for 3907000000

  • Russia sanctions: import ban Regulation (EU) No 833/2014, Annex XXI 3907

    Art. 3i, goods generating significant revenue for Russia

    Read the act on EUR-Lex
  • Russia sanctions: export ban Regulation (EU) No 833/2014, Annex XXIII 3907

    Art. 3k, goods contributing to Russian industrial capacity

    Read the act on EUR-Lex

For orientation only. Check the act before you rely on a flag; thresholds, derogations and exceptions are not shown in full.

Import VAT in the EU

  • Austria 20 %
  • Belgium 21 %
  • Bulgaria 20 %
  • Croatia 25 %
  • Cyprus 19 %
  • Czechia 21 %
  • Denmark 25 %
  • Estonia 24 % maybe 9 %
  • Finland 25.5 %
  • France 20 %
  • Germany 19 %
  • Greece 24 %
  • Hungary 27 %
  • Ireland 23 %
  • Italy 22 %
  • Latvia 21 %
  • Lithuania 21 %
  • Luxembourg 17 %
  • Malta 18 %
  • Netherlands 21 %
  • Poland 23 %
  • Portugal 23 %
  • Romania 21 %
  • Slovakia 23 %
  • Slovenia 22 %
  • Spain 21 %
  • Sweden 25 %

Standard rate per member state, on the customs value, the duty and transport to the destination. Reduced rates often depend on the use or the buyer and apply only where the country provides them for these goods. Source: European Commission, Taxes in Europe Database, as of Nov 2, 2026.

Rules of origin

Preferential rules of origin for subheading 390700 depend on the trade agreement. The Commission publishes them in Access2Markets.

Rules of origin on Access2Markets

Information

When importing or exporting "Polyacetals, other polyethers and epoxide resins, in primary forms; polycarbonates, alkyd resins, polyallyl esters and other polyesters, in primary forms", it is crucial to have the correct HS code or TARIC code. The HS code 3907000000 80 serves as the standard code for this product, ensuring that the appropriate duties and taxes are applied when crossing international borders.

To ensure your business transactions run smoothly when importing or exporting "Polyacetals, other polyethers and epoxide resins, in primary forms; polycarbonates, alkyd resins, polyallyl esters and other polyesters, in primary forms", consider the following points:

  1. Inform yourself about the specific import and export regulations in the countries involved. This includes possible restrictions, taxes, and duties applicable to "Polyacetals, other polyethers and epoxide resins, in primary forms; polycarbonates, alkyd resins, polyallyl esters and other polyesters, in primary forms".
  2. Check if any additional licenses, permits, or certificates are required to import "Polyacetals, other polyethers and epoxide resins, in primary forms; polycarbonates, alkyd resins, polyallyl esters and other polyesters, in primary forms" into the destination country or export it from the country of origin.
  3. Make sure your trading partners have valid identification numbers, such as EORI numbers (Economic Operators Registration and Identification) in the EU, to streamline trade and minimize delays.
  4. Ensure that all trade- and customs-related documents (such as commercial invoices, packing lists, certificates of origin, and insurance policies) are accurately completed and adhere to the respective national regulations.
  5. Keep an eye on the current exchange rates, as well as packaging, shipping, and insurance costs, to accurately calculate trade costs.

In summary, the HS code or TARIC code for "Polyacetals, other polyethers and epoxide resins, in primary forms; polycarbonates, alkyd resins, polyallyl esters and other polyesters, in primary forms" is 3907000000 80. Make sure you accurately use this code in all your trade and customs documents to guarantee smooth and hassle-free transactions. With these tips, you'll be better prepared for the challenges of international trade and can successfully import and export "Polyacetals, other polyethers and epoxide resins, in primary forms; polycarbonates, alkyd resins, polyallyl esters and other polyesters, in primary forms".

HS Code structure

39
Chapter
07
Heading
00
Subheading
00
CN Subheading
00
TARIC Subheading
80
Additional TARIC codes

1. Chapter

There are 21 different sections, which are divided into 96 chapters. Exceptional chapters include chapter 77, which is reserved for future use, chapters 98 and 99, which are limited at national level, and chapter 99, which is a specific code for temporary changes. In the example above, chapter 39 was selected for plastics and articles thereof

2. Heading

The heading determines the specific category within a certain chapter. In the example above, the 07 refers to Polyacetals, other polyethers and epoxide resins, in primary forms; polycarbonates, alkyd resins, polyallyl esters and other polyesters, in primary forms.

HS Code tree structure

3900000000 80

Chapter PLASTICS AND ARTICLES THEREOF

3907000000 80

Polyacetals, other polyethers and epoxide resins, in primary forms; polycarbonates, alkyd resins, polyallyl esters and other polyesters, in primary forms

3907100000 80

- Polyacetals

3907210000 10

- Other polyethers

3907210000 80

- - Bis(polyoxyethylene) methylphosphonate

3907290000 80

- - Other

3907291100 10

- - - Polyether alcohols

3907291100 80

- - - - Polyethylene glycols

3907291110 80

- - - - - Poly(ethylene oxide) of a number average molecular weight (M@n) of 100 000 or more

3907291120 80

- - - - - Bis[Methoxypoly[ethyleneglycol)]-maleimidopropionamide, chemically modified with lysine, of a number average molecular weight (M@n) of 40 000

3907291130 80

- - - - - Mixture containing by weight: -75 % or more of polyethyleneglycol modified butyl-2-cyano-3-(4-hydroxy-3-methoxyphenyl) acrylate, with an ethylene oxide chain length of not more than 30 (CAS RN 780763-40-8) -not more than 25 % of ethoxylated sorbitan trioleate (CAS RN 9005-70-3)

3907291140 80

- - - - - Ethoxylated glycerol (CAS RN 31694-55-0) with a hydroxyl number of 541 or more but not more than 587 (ASTM 4274)

3907291190 80

- - - - - Other

3907292000 80

- - - - Other

3907292035 80

- - - - - Mixture containing by weight: - 5 % or more but not more than 15 % of a copolymer of glycerol, propylene oxide and ethylene oxide (CAS RN 9082-00-2), and - 85 % or more but not more than 95 % of a copolymer of sucrose, propylene oxide and ethylene oxide (CAS RN 26301-10-0)

3907292040 80

- - - - - Copolymer of tetrahydrofuran and tetrahydro-3-methylfuran (CAS RN 38640-26-5) with a number average molecular weight (Mn) of 900 or more but not more than 3 600

3907292045 80

- - - - - 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated

3907292050 80

- - - - - Poly(p-phenylene oxide) in the form of powder - with a glasstransitiontemperature of 210 °C or more, - with a weight average molecular weight (Mw) of 35 000 or ore but not more than 80 000 - with an inherent viscosity of 0,2 or more but not more than 0,6 dl/gram

3907292055 80

- - - - - 4-Nonylphenol, branched and linear, ethoxylated

3907292063 80

- - - - - Preparation containing by weight -5 % or more but not more than 15 % of polyethylene-polypropylene glycol (CAS RN 9003-11-6) and -85 % or more but not more than 95 % of oxirane, 2-methyl-,polymer with oxirane, ether with 5-(2-(4-(bis(2-hydroxyethyl)amino)-2-methylphenyl)diazenyl)-3-methyl-2,4-thiophenedicarbonitrile (2:1) (CAS RN 515857-23-5)

3907292065 80

- - - - - Preparation containing by weight -40 % or more but not more than 60 % of oxirane, 2-methyl-, polymer with oxirane, ether with 2,2-[[3-methyl-4-[(4-methyl-2-benzothiazolyl)azo]phenyl]imino]bis[ethanol] (2:1) (CAS RN 229306-55-2) and -40 % or more but not more than 60 % of polyethylene-polypropylene glycol (CAS RN 9003-11-6)

3907292068 80

- - - - - Preparation containing by weight -90 % or more but not more than 99 % of oxirane, 2-methyl-,polymer with oxirane, ether with ethyl 3-(4-(bis(2-hydroxyethyl)amino)phenyl)-2-cyano-2-propenoate (2:1) (CAS RN 152286-82-3) and -1 % or more but not more than 10 % of polyethylene-polypropylene glycol (CAS RN 9003-11-6)

3907292070 80

- - - - - Preparation containing by weight -50 % or more but not more than 70 % of oxirane, methyl-polymer with oxirane, ether with bis(4-[bis(2-hydroxyethyl)amino)phenyl] (2-sulfophenyl)methyl (4:1), monosodium salt block (CAS RN 126042-89-5) and -30 % or more but not more than 50 % of polyethylene-polypropylene glycol (CAS RN 9003-11-6)

3907292073 80

- - - - - Preparation containing by weight of  -23 % or more but not more than 36 % of oxirane, 2-methyl-,polymer with oxirane, ether with bis(4-(bis(2-hydroxyethyl)amino)phenyl)(2-sulfophenyl)methyl (4:1), monosodium salt, block (CAS RN 126042-89-5), -4 % or more but not more than 20 % of polyethylene-polypropylene glycol (CAS RN 9003-11-6), -25 % or more but not more than 30 % of oxirane, 2-methyl-,polymer with oxirane, ether with 2,2'-((3-methyl-4-((4-methyl-2-benzothiazolyl)azo)phenyl)imino)bis(ethanol)(2:1) (CAS RN 229306-55-2), -5 % or more but not more than 10 % of oxirane, 2-methyl-,polymer with oxirane, ether with 5-(2-(4-(bis(2-hydroxyethyl)amino)-2-methylphenyl)diazenyl)-3-methyl-2,4-thiophenedicarbonitrile (2:1) (CAS RN 515857-23-5) and -15 % or more but not more than 25 % of oxirane, 2-methyl-,polymer with oxirane, ether with ethyl 3-(4-bis(2-hydroxyethyl)amino)phenyl)-2-cyano-2-propenoate (2:1) (CAS RN 152286-82-3)

3907292075 80

- - - - - Preparation containing by weight -60 % or more but not more than 80 % of Oxirane, 2-methyl-,polymer with oxirane, ether with 2,2',2,2'-(sulfonylbis(4,1-phenylene)-2,1-diazenediyl(3-methyl-4,1-phenylene)nitrilo))tetrakis(ethanol) (4:1) (CAS RN 927432-39-1) and -20 % or more but not more than 40 % of polyethylene-polypropylene glycol (CAS RN 9003-11-6)

3907292090 80

- - - - - Other

3907299100 10

- - - Other

3907299100 80

- - - - Copolymer of 1-chloro-2,3-epoxypropane with ethylene oxide

3907299900 80

- - - - Other

3907299920 80

- - - - - 2,3-Bis(methylpolyoxyethylene-oxy)-1-[(3-maleimido-1-oxopropyl)amino]propyloxy propane (CAS RN 697278-30-1) with a number average molecular weight (Mn) of at least 20 kDa whether or not modified with a chemical entity enabling a linkage between the PEG and a protein or a peptide

3907299930 80

- - - - - Homopolymer of 1-chloro-2,3-epoxypropane (epichlorohydrin)

3907299945 80

- - - - - Copolymer of ethylene oxide and propylene oxide, having aminopropyl and methoxy end-groups

3907299950 80

- - - - - Vinyl-silyl terminated perfluoropolyether polymer or an assortment of two components consisting of the same type of vinyl-silyl terminated perfluoropolyether polymer as the main ingredient

3907299955 80

- - - - - Succinimidyl ester of methoxy poly(ethylene glycol)propionic acid, of a number average molecular weight (Mn) of 5 000

3907299960 80

- - - - - Polytetramethylene oxide di-p-aminobenzoate

3907299970 80

- - - - - Poly(oxy-1,4-phenyleneoxy-1,4-phenylenecarbonyl-1,4-phenylene) (CAS RN 29658-26-2) containing by weight not more than 35 % of additives

3907299990 80

- - - - - Other

3907300000 80

- Epoxide resins

3907300005 10

- - Epoxide resin, halogen-free, - containing by weight more than 2 % phosphoros calculated on the solid content, chemically bound in the epoxide resin, - not containing any hydrolysable chloride or containing less than 300 ppm hydrolysable chloride, and - containing solvents for use in the manufacture of prepreg sheets or rolls of a kind used for the production of printed circuits

3907300005 80

- - - Products containing more than 35 % by weight of epoxy resins, also known as epoxide resins or polyepoxides, which are polymers or prepolymers containing reactive epoxy groups, based on epichlorohydrin (‘ECH’) and an aliphatic or aromatic alcoholic component (such as BPA), in solid, semi-solid or liquid forms, having all types of grade, purity, molecule weight or molecular structure, whether or not containing modifiers, curing agents, or additives, so long as the curing agents have not chemically reacted so as to cure the epoxy resin or convert it into a different product no longer containing epoxy groups

3907300008 80

- - - Other

3907300020 10

- - Epoxide resin - containing by weight 21% or more of brome, - not containing any hydrolysable chloride or containing less than 500 ppm hydrolysable chloride, and - containing solvents

3907300020 80

- - - Products containing more than 35 % by weight of epoxy resins, also known as epoxide resins or polyepoxides, which are polymers or prepolymers containing reactive epoxy groups, based on epichlorohydrin (‘ECH’) and an aliphatic or aromatic alcoholic component (such as BPA), in solid, semi-solid or liquid forms, having all types of grade, purity, molecule weight or molecular structure, whether or not containing modifiers, curing agents, or additives, so long as the curing agents have not chemically reacted so as to cure the epoxy resin or convert it into a different product no longer containing epoxy groups

3907300023 80

- - - Other

3907300040 80

- - Epoxide resin, containing by weight 70 % or more of silicon dioxide, for the encapsulation of goods of headings 8504, 8533, 8535, 8536, 8541, 8542 or 8548

3907300070 80

- - Preparation of epoxy resin (CAS RN 29690-82-2) and phenolic resin (CAS RN 9003-35-4) containing by weight: - 65 % or more but not more than 75 % of silicon dioxide (CAS RN 60676-86-0), and - none or not more than 0,5 % of carbon black (CAS RN 1333-86-4)

3907300080 10

- - Other

3907300080 80

- - - Products containing more than 35 % by weight of epoxy resins, also known as epoxide resins or polyepoxides, which are polymers or prepolymers containing reactive epoxy groups, based on epichlorohydrin (‘ECH’) and an aliphatic or aromatic alcoholic component (such as BPA), in solid, semi-solid or liquid forms, having all types of grade, purity, molecule weight or molecular structure, whether or not containing modifiers, curing agents, or additives, so long as the curing agents have not chemically reacted so as to cure the epoxy resin or convert it into a different product no longer containing epoxy groups

3907300085 80

- - - Other

3907400000 80

- Polycarbonates

3907400025 80

- - Polymer blend of polycarbonate and poly(methyl methacrylate) with a polycarbonate content of 98.5 % or more, in the form of pellets or granules, with a luminous transmittance of 88.5% or more, measured using a test sample with a thickness of 4 mm at a wavelength of λ = 400 nm (according to ISO 13468-2)

3907400035 80

- - α-Phenoxycarbonyl-ω-phenoxypoly[oxy(2,6-dibromo-1,4-phenylene) isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl] (CAS RN 94334-64-2)

3907400045 80

- - α-(2,4,6-Tribromophenyl)-ω-(2,4,6-tribromophenoxy)poly[oxy(2,6-dibromo-1,4-phenylene)isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl] (CAS RN 71342-77-3)

3907400090 80

- - Other

3907500000 80

- Alkyd resins

3907610000 10

- Poly(ethylene terephthalate)

3907610000 80

- - Having a viscosity number of 78 ml/g or higher

3907610020 80

- - - Copolymer of poly(ethylene terephthalate) and cyclohexane dimethanol, containing more than 10 % by weight of cyclohexane dimethanol

3907610080 80

- - - Other

3907690000 80

- - Other

3907690010 80

- - - Copolymer of terephthalic acid and isophthalic acid with ethylene glycol, butane-1,4-diol and hexane-1,6-diol

3907690020 80

- - - Copolymer of poly(ethylene terephthalate) and cyclohexane dimethanol, containing more than 10 % by weight of cyclohexane dimethanol

3907690090 80

- - - Other

3907700000 80

- Poly(lactic acid)

3907910000 10

- Other polyesters

3907910000 80

- - Unsaturated

3907911000 80

- - - Liquid

3907919000 80

- - - Other

3907919010 80

- - - - Diallyl phthalate prepolymer, in powder form

3907919090 80

- - - - Other

3907990000 80

- - Other

3907990500 80

- - - Thermoplastic liquid crystal aromatic polyester copolymers

3907991000 80

- - - Poly(ethylene naphthalene-2,6-dicarboxylate)

3907998000 80

- - - Other

3907998025 80

- - - - Copolymer, containing 72 % by weight or more of terephthalic acid and/or isomers thereof and cyclohexanedimethanol

3907998030 80

- - - - Poly(hydroxyalkanoate), predominantly consisting of poly(3-hydroxybutyrate)

3907998035 80

- - - - Copolymer in form of a clear, pale yellow liquid, consisting of - phthalic acid isomers and/or aliphatic dicarboxylic acids, - aliphatic diols, and - fatty acid end-caps with: - a hydroxyl number of 120 mg KOH or more but not more than 350 mg KOH, - a viscosity at 25 °C of 2000 cPs or more but not more than 8000 cPs, and - an acid value less than 10 mg KOH/g

3907998050 80

- - - - Aliphatic-aromatic copolyesters, namely polybutylene adipate-co-terephthalate (PBAT) and polybutylene sebacate-co-terephthalate (PBSeT), synthesised from petrochemical or biological feedstock, in their pure form or contained in compounds containing no less than 50 % of PBAT or PBSeT polymer by weight

3907998070 80

- - - - Copolymer of poly(ethylene terephthalate) and cyclohexane dimethanol, containing more than 10 % by weight of cyclohexane dimethanol

3907998080 80

- - - - Copolymer, consisting of 72 % by weight or more of terephthalic acid and/ or derivatives thereof and cyclohexanedimethanol, completed with linear and/ or cyclic dioles

3907998090 80

- - - - Other