New Describe a product, get the CN code. Also as API and MCP for AI agents. Try it free
Jump to content

Tariff number 3925000000 80 - Builders' ware of plastics, not elsewhere specified or included

Email me changes

Import trade restrictions for 3925000000 80

This table contains information on trade restrictions for the import of goods into the EU and the EU into third countries. The table contains information on trade restrictions which are imposed due to customs unions, preferences, tariff quotas, customs unions, veterinary controls, third country duties and non-preferential tariff quotas.

Duties 67
1011
ERGA OMNES 1011
01-01-1999
6.5 %
Third country duty 103
1007
EU-Switzerland agreement: re-imported goods 1007
01-01-2007
0 %
Tariff preference 142
BA
Bosnia and Herzegovina BA
01-01-2009
0 %
Tariff preference 142
MK
North Macedonia MK
01-01-2009
0 %
Tariff preference 142
UA
Ukraine UA
01-01-2016
0 %
Tariff preference 142
2020
GSP - General arrangements 2020
01-01-2023
0 %
Tariff preference 142
SG
Singapore SG
01-01-2027
0 %
Tariff preference 142
XS
Serbia XS
01-02-2010
0 %
Tariff preference 142
JP
Japan JP
01-02-2020
0 %
Tariff preference 142
PE
Peru PE
01-03-2013
0 %
Tariff preference 142
AL
Albania AL
01-04-2009
0 %
Tariff preference 142
XK
Kosovo XK
01-04-2016
0 %
Tariff preference 142
ME
Montenegro ME
01-05-2010
0 %
Tariff preference 142
NZ
New Zealand NZ
01-05-2024
0 %
Tariff preference 142
1011
ERGA OMNES 1011
01-07-2016
0 %
Suspension - goods for certain categories of ships, boats and other vessels and for drilling or production platforms 117
1011
ERGA OMNES 1011
01-11-2018
0 %
Airworthiness tariff suspension 119
AM
Armenia AM
10-10-2026
– 11-10-2028
0 %
Tariff preference 142
CH
Switzerland CH
20-12-1972
0 %
Tariff preference 142
1006
EU-Canada agreement: re-imported goods 1006
21-09-2017
0 %
Tariff preference 142
CA
Canada CA
21-09-2017
0 %
Tariff preference 142
SG
Singapore SG
21-11-2019
– 31-12-2026
0 %
Tariff preference 142
FO
Faroe Islands FO
01-01-1997
0 %
Tariff preference 142
XL
Melilla XL
01-01-1999
0 %
Accession act0001/85
Tariff preference 142
PS
Occupied palestinian Territory PS
01-01-2001
0 %
Tariff preference 142
AD
Andorra AD
01-01-2006
0 %
Customs union duty 106
SM
San Marino SM
01-01-2006
0 %
Customs union duty 106
TR
Türkiye TR
01-01-2006
0 %
Customs union duty 106
2027
GSP+ (incentive arrangement for sustainable development and good governance) 2027
01-01-2014
0 %
Tariff preference 142
2005
GSP-EBA (Special arrangement for the least-developed countries - Everything But Arms) 2005
01-01-2014
0 %
Tariff preference 142
MD
Moldova, Republic of MD
01-01-2016
0 %
Tariff preference 142
EC
Ecuador EC
01-01-2017
0 %
Tariff preference 142
GB
United Kingdom GB
01-01-2021
0 %
Tariff preference 142
2080
OCTs (Overseas Countries and Territories) 2080
01-01-2021
0 %
Tariff preference 142
GH
Ghana GH
01-01-2027
0 %
Tariff preference 142
CL
Chile CL
01-02-2025
0 %
Tariff preference 142
TN
Tunisia TN
01-03-1998
0 %
Tariff preference 142
MA
Morocco MA
01-03-2000
0 %
Tariff preference 142
LB
Lebanon LB
01-04-2006
0 %
Tariff preference 142
JO
Jordan JO
01-05-2002
0 %
Tariff preference 142
EG
Egypt EG
01-06-2004
0 %
Tariff preference 142
XC
Ceuta XC
01-07-1991
0 %
Accession act0001/85
Tariff preference 142
2012
EEA - European Economic Area 2012
01-07-2007
0 %
Tariff preference 142
KR
Korea, Republic of (South Korea) KR
01-07-2014
0 %
Tariff preference 142
MX
Mexico MX
01-07-2016
0 %
Tariff preference 142
KE
Kenya KE
01-07-2024
0 %
Tariff preference 142
US
United States US
01-07-2026
0 %
Tariff preference 142
SY
Syria SY
01-08-1994
0 %
Tariff preference 142
CO
Colombia CO
01-08-2013
0 %
Tariff preference 142
2200
Central America 2200
01-08-2013
0 %
Tariff preference 142
VN
Viet Nam VN
01-08-2020
0 %
Tariff preference 142
DZ
Algeria DZ
01-09-2005
0 %
Tariff preference 142
GE
Georgia GE
01-09-2014
0 %
Tariff preference 142
1011
ERGA OMNES 1011
01-11-2026
2 EUR
Union handling fee 800
1011
ERGA OMNES 1011
01-11-2026
3 EUR
Low-value consignment customs duty 107
CI
Ivory Coast CI
02-12-2019
0 %
Tariff preference 142
2000
Preferential origin in accordance with the Agreement in the form of an Exchange of Letters between the European Union and the Kingdom of Morocco on the amendment of Protocols 1 and 4 to the Euro-Mediterranean Agreement establishing an association between the European Communities and their Member States, of the one part, and the Kingdom of Morocco, of the other part. 2000
03-10-2025
0 %
Tariff preference 142
CM
Cameroon CM
04-08-2014
0 %
Tariff preference 142
1035
SADC EPA 1035
10-10-2016
0 %
Tariff preference 142
ZA
South Africa ZA
10-10-2016
0 %
Tariff preference 142
1034
Eastern and Southern Africa States 1034
14-05-2012
0 %
Tariff preference 142
GH
Ghana GH
15-12-2016
– 31-12-2026
0 %
Tariff preference 142
IL
Israel IL
16-05-2023
0 %
Tariff preference 142
SB
Solomon Islands SB
17-05-2020
0 %
Tariff preference 142
PG
Papua New Guinea PG
20-12-2009
0 %
Tariff preference 142
FJ
Fiji FJ
28-07-2014
0 %
Tariff preference 142
1033
CARIFORUM 1033
29-12-2008
0 %
Tariff preference 142
WS
Samoa WS
31-12-2018
0 %
Tariff preference 142
Controls and documents 5
RU
Russian Federation RU
19-12-2023
– 31-12-2027
Document required
banned without it
Import control 762
BY
Belarus BY
25-02-2025
Document required
banned without it
Import control 760
1011
ERGA OMNES 1011
25-06-2025
Document required
banned without it
Import control of fluorinated greenhouse gases 724
UA
Ukraine UA
24-06-2026
Document required
banned without it
Import control 762
UA
Ukraine UA
24-06-2026
Document required
banned without it
Import control 760

Explanation of trade restrictions

Erga Omnes means "for all".

Third countries are countries that are not part of the EU.

GSP means "Generalised System of Preferences".

GSP Plus means "Generalised System of Preferences Plus".

European Economic Area (EEA) means all EU member states and Iceland, Liechtenstein and Norway.

OCTs stands for "Overseas Countries and Territories". They are countries and territories that are not part of the EU. More information

CARIFORUM is a regional economic integration organisation comprising 15 Caribbean Community (CARICOM) countries and the Dominican Republic.

SADC EPA stands for "Southern African Development Community - Economic Partnership Agreement".

Duty means "customs duties".

Estimate the import cost for 3925000000

  • Customs value €1,000.00
  • Customs duty 6.5 % €65.00
  • Import VAT 19 % €202.35
  • Total €1,267.35

May be lower under conditions:

  • Suspension - goods for certain categories of ships, boats and other vessels and for drilling or production platforms: 0 %
  • Airworthiness tariff suspension: 0 %

Documents and checks for China

An estimate only. The customs value is the price including transport and insurance to the EU border. Excise duties, other fees and producer-specific anti-dumping rates are not included. Preferential rates need valid proof of origin. Country groups and exclusions: TARIC, as of November 2026.

Export measures for 3925000000

What applies when these goods leave the EU: export controls, dual-use and other authorisations, bans per destination and the supplementary unit of the export declaration.

Controls and documents 1
BY
Belarus BY
25-02-2025
Document required
banned without it
Export control 766

History

Duty rates and measures for this code over time (yearly snapshots).

Preferential rules of origin for 3925000000

What the goods must meet to count as originating in a partner country and get the preferential duty, per agreement.

  • Autonomous Trade Preferences (Western Balkans) · Kosovo

    EU-Algeria Association Agreement · Algeria

    EU-Egypt Association Agreement · Egypt

    EU-Jordan Association Agreement · Jordan

    EU-Lebanon Association Agreement · Lebanon

    EU-Morocco Association Agreement · Morocco

    EU-Tunisia Association Agreement · Tunisia

    Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product [13] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [14] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [15] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [16] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [17] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [18] The following foils shall be considered as highly transparent: foils, the optical dimming of which, measured according to ASTM-D 1003-16 by Gardner Hazemeter (i.e. Hazefactor), is less than 2 %.

  • EEA/EFTA agreements (Switzerland, Norway, Liechtenstein, Faroe Islands) · Faroe Islands, Liechtenstein, Norway, Switzerland

    EU-Iceland FTA · Iceland

    EU-Ukraine DCFTA · Ukraine

    Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product [13] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [18] The following foils shall be considered as highly transparent: foils, the optical dimming of which, measured according to ASTM-D 1003-16 by Gardner Hazemeter (i.e. Hazefactor), is less than 2 %.

  • EPA CARIFORUM

    EU-Korea FTA · South Korea

    Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

  • EU-Canada CETA · Canada

    A change from any other heading.

  • EU-Chile Association Agreement · Chile

    Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product [13] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [14] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [15] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [16] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [17] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [18] The following foils shall be considered as highly transparent: foils, the optical dimming of which, measured according to ASTM-D 1003—16 by Gardner Hazemeter (i.e. Hazefactor), is less than 2 %.

  • EU-Colombia/Peru/Ecuador Trade Agreement · Colombia, Ecuador, Peru

    Plastics and articles thereof / or: Manufacture from materials of any heading, except that of the product / or: Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

  • EPA Eastern and Southern Africa

    Rubber and articles thereof; except for: / or: Manufacture in which all the materials used are classified within a heading other than that of the product [13] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [18] The following foils shall be considered as highly transparent: foils, the optical dimming of which – measured according to ASTM-D 1003-16 by Gardner Hazemeter (i.e. Hazefactor) – is less than 2 per cent.

  • EU Market Access Regulation (EPA) · Cameroon, Côte d’Ivoire, Ghana, Kenya

    Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product [16] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [17] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [18] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [19] The following foils shall be considered as highly transparent: foils, the optical dimming of which - measured according to ASTM-D 1003-16 by Gardner Hazemeter (i.e. Hazefactor) - is less than 2 percent.

  • EPA Pacific · Fiji, Papua New Guinea, Samoa, Solomon Islands

    Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product [13] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [18] The following foils shall be considered as highly transparent: foils, the optical dimming of which - measured according to ASTM-D 1003-16 by Gardner Hazemeter (i.e. Hazefactor) - is less than 2 %.

  • EU-Georgia DCFTA · Georgia

    Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product [15] Note 3 to Chapter 32 says that these preparations are those of a kind used for colouring any material or used as ingredients in the manufacture of colouring preparations, provided that they are not classified in another heading in Chapter 32. / or: [20] A ‘group’ is regarded as any part of the heading separated from the rest by a semicolon.

  • Generalised Scheme of Preferences (GSP, GSP+, EBA) · Armenia, India, Kenya, Pakistan, Samoa, Solomon Islands, Syria, Vietnam

    Plastics and articles thereof; except for: / or: (a) LDCs Manufacture from materials of any heading, except that of the product. or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product / or: (b) Other beneficiary countries Manufacture from materials of any heading, except that of the product. or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

  • EU-Israel Association Agreement · Israel

    Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product [22] In the case of the products composed of materials classified both within heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [24] In the case of the products composed of materials classified both within heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [25] In the case of the products composed of materials classified both within heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [28] The following foils shall be considered as highly transparent: foils, the optical dimming of which, measured according to ASTM-D 1003-16 by Gardner Hazemeter (Hazefactor), is less than 2 %.

  • EU-Japan EPA · Japan

    CTH; MaxNOM 50 % (EXW); or RVC 55 % (FOB).

  • EU-Central America Association Agreement

    Articles of plastics / or: Manufacture from materials of any heading, except that of the product / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

  • EU-Moldova DCFTA · Moldova

    Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product [20] The following foils shall be considered as highly transparent: foils, the optical dimming of which, measured according to ASTM-D 1003-16 by Gardner Hazemeter (i.e. Hazefactor), is less than 2 %.

  • EU-Mexico Global Agreement · Mexico

    Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product [15] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [16] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [17] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [18] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [19] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [20] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [21] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [22] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [23] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [24] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [25] In the case of the products composed of materials classified within both heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [26] The following foils shall be considered as highly transparent: foils, the optical dimming of which - measured according to ASTM-D 1003-16 by Gardner Hazemeter (i.e. Hazefactor) - is less than 2 %.

  • Pan-Euro-Mediterranean (PEM) Convention · Albania, Andorra, Bosnia & Herzegovina, Egypt, Faroe Islands, Iceland, Kosovo, Liechtenstein, Montenegro, North Macedonia, Norway, Palestine, Switzerland, Türkiye

    Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product [15] In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within heading 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [20] The following foils shall be considered as highly transparent: foils, the optical dimming of which, measured according to ASTM-D 1003-16 by Gardner Hazemeter (i.e. Hazefactor), is less than 2%.

  • EU-Palestine Interim Association Agreement · Palestine

    Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product [1] In the case of the products composed of materials classified within both heading Nos. 3901 to 3906, on the one hand, and within heading Nos. 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. / or: [1] The following foils shall be considered as highly transparent: foils, the optical dimming of which - measured according to ASTM-D 1003-16 by Gardner Hazemeter (i.e. Hazefactor) - is less than 2 percent.

  • EPA SADC · South Africa

    Articles of plastics / or: Manufacture in which the value of all the materials used does not exceed 50 % of the ex–works price of the product [18] In the case of the products composed of materials classified both within heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to the group of materials which predominates by weight in the product. / or: [19] In the case of the products composed of materials classified both within heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to the group of materials which predominates by weight in the product. / or: [21] In the case of the products composed of materials classified both within heading Nos 3901 to 3906, on the one hand, and within heading Nos 3907 to 3911, on the other hand, this restriction only applies to the group of materials which predominates by weight in the product. / or: [23] The following foils shall be considered as highly transparent: foils, the optical dimming of which — measured according to ASTM-D 1003-16 by Gardener Hazemeter (i.e. Hazefactor) — is less than 2 percent.

  • EU-Singapore FTA · Singapore

    Manufacture from materials of any heading, except that of the product. However materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-work price of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product [21] In the case of the products composed of materials classified within both headings 3901 to 3906, and in the case of the products within headings 3907 to 3911, this restriction only applies to that group of materials which predominates by weight in the product.

Source: European Commission, Access2Markets (CC BY 4.0, shortened). The text of the agreement prevails. Access2Markets

Legal and explanatory notes for 3925000000

3925 CN Explanatory Notes: Builders' ware of plastics, not elsewhere specified or included

See note 11 to this chapter.

3925 20 00 CN Explanatory Notes: Doors, windows and their frames and thresholds for doors

See the HS Explanatory Note to subheading 3925 20.

3925 90 10 CN Explanatory Notes: Fittings and mountings intended for permanent installation in or on doors, windows, staircases, walls or other parts of buildings

See note 11(ij) to this chapter.

Notes to chapter 39

Notes 1. Throughout the nomenclature, the expression ‘plastics’ means those materials of headings 3901 to 3914 which are or have been capable, either at the moment of polymerisation or at some subsequent stage, of being formed under external influence (usually heat and pressure, if necessary with a solvent or plasticiser) by moulding, casting, extruding, rolling or other process into shapes which are retained on the removal of the external influence. Throughout the nomenclature, any reference to ‘plastics’ also includes vulcanised fibre. The expression, however, does not apply to materials regarded as textile materials of Section XI. 2. This chapter does not cover: (a) lubricating preparations of heading 2710 or 3403; (b) waxes of heading 2712 or 3404; (c) separate chemically defined organic compounds (Chapter 29); (d) heparin or its salts (heading 3001); (e) solutions (other than collodions) consisting of any of the products specified in headings 3901 to 3913 in volatile organic solvents when the weight of the solvent exceeds 50 % of the weight of the solution (heading 3208); stamping foils of heading 3212; (f) organic surface-active agents or preparations of heading 3402; (g) run gums or ester gums (heading 3806); (h) prepared additives for mineral oils (including gasoline) or for other liquids used for the same purposes as mineral oils (heading 3811); (ij) prepared hydraulic fluids based on polyglycols, silicones or other polymers of Chapter 39 (heading 3819); (k) diagnostic or laboratory reagents on a backing of plastics (heading 3822); (l) synthetic rubber, as defined for the purposes of Chapter 40, or articles thereof; (m) saddlery or harness (heading 4201) or trunks, suitcases, handbags or other containers of heading 4202; (n) plaits, wickerwork or other articles of Chapter 46; (o) wallcoverings of heading 4814; (p) goods of Section XI (textiles and textile articles); (q) articles of Section XII (for example, footwear, headgear, umbrellas, sun umbrellas, walking sticks, whips, riding-crops or parts thereof); (r) imitation jewellery of heading 7117; (s) articles of Section XVI (machines and mechanical or electrical appliances); (t) parts of aircraft or vehicles of Section XVII; (u) articles of Chapter 90 (for example, optical elements, spectacle frames, drawing instruments); (v) articles of Chapter 91 (for example, clock or watch cases); (w) articles of Chapter 92 (for example, musical instruments or parts thereof); (x) articles of Chapter 94 (for example, furniture, luminaires and lighting fittings, illuminated signs, prefabricated buildings); (y) articles of Chapter 95 (for example, toys, games, sports requisites); or (z) articles of Chapter 96 (for example, brushes, buttons, slide fasteners, combs, mouthpieces or stems for smoking pipes, cigarette-holders or the like, parts of vacuum flasks or the like, pens, propelling pencils, and monopods, bipods, tripods and similar articles). 3. Headings 3901 to 3911 apply only to goods of a kind produced by chemical synthesis, falling in the following categories: (a) liquid synthetic polyolefins of which less than 60 % by volume distils at 300 °C, after conversion to 1 013 mbar when a reduced-pressure distillation method is used (headings 3901 and 3902); (b) resins, not highly polymerised, of the coumarone-indene type (heading 3911); (c) other synthetic polymers with an average of at least five monomer units; (d) silicones (heading 3910); (e) resols (heading 3909) and other prepolymers. 4. The expression ‘copolymers’ covers all polymers in which no single monomer unit contributes 95 % or more by weight to the total polymer content. For the purposes of this chapter, except where the context otherwise requires, copolymers (including co-polycondensates, co-polyaddition products, block copolymers and graft copolymers) and polymer blends are to be classified in the heading covering polymers of that comonomer unit which predominates by weight over every other single comonomer unit. For the purposes of this note, constituent comonomer units of polymers falling in the same heading shall be taken together. If no single comonomer unit predominates, copolymers or polymer blends, as the case may be, are to be classified in the heading which occurs last in numerical order among those which equally merit consideration. 5. Chemically modified polymers, that is those in which only appendages to the main polymer chain have been changed by chemical reaction, are to be classified in the heading appropriate to the unmodified polymer. This provision does not apply to graft copolymers. 6. In headings 3901 to 3914, the expression ‘primary forms’ applies only to the following forms: (a) liquids and pastes, including dispersions (emulsions and suspensions) and solutions; (b) blocks of irregular shape, lumps, powders (including moulding powders), granules, flakes and similar bulk forms. 7. Heading 3915 does not apply to waste, parings and scrap of a single thermoplastic material, transformed into primary forms (headings 3901 to 3914). 8. For the purposes of heading 3917, the expression ‘tubes, pipes and hoses’ means hollow products, whether semi-manufactured or finished products, of a kind generally used for conveying, conducting or distributing gases or liquids (for example, ribbed garden hose, perforated tubes). This expression also includes sausage casings and other lay-flat tubing. However, except for the last mentioned, those having an internal cross-section other than round, oval, rectangular (in which the length does not exceed one-and-a-half times the width) or in the shape of a regular polygon are not to be regarded as tubes, pipes and hoses but as profile shapes. 9. For the purposes of heading 3918, the expression ‘wall or ceiling coverings of plastics’ applies to products in rolls, of a width not less than 45 cm, suitable for wall or ceiling decoration, consisting of plastics fixed permanently on a backing of any material other than paper, the layer of plastics (on the face side) being grained, embossed, coloured, design-printed or otherwise decorated. 10. In headings 3920 and 3921, the expression ‘plates, sheets, film, foil and strip’ applies only to plates, sheets, film, foil and strip (other than those of Chapter 54) and to blocks of regular geometric shape, whether or not printed or otherwise surface-worked, uncut or cut into rectangles (including squares) but not further worked (even if when so cut they become articles ready for use). 11. Heading 3925 applies only to the following articles, not being products covered by any of the earlier headings of sub-chapter II: (a) reservoirs, tanks (including septic tanks), vats and similar containers, of a capacity exceeding 300 litres; (b) structural elements used, for example, in floors, walls or partitions, ceilings or roofs; (c) gutters and fittings therefor; (d) doors, windows and their frames and thresholds for doors; (e) balconies, balustrades, fencing, gates and similar barriers; (f) shutters, blinds (including venetian blinds) and similar articles and parts and fittings thereof; (g) large-scale shelving for assembly and permanent installation, for example, in shops, workshops, warehouses; (h) ornamental architectural features, for example, flutings, cupolas, dovecotes; and (ij) fittings and mountings intended for permanent installation in or on doors, windows, staircases, walls or other parts of buildings, for example, knobs, handles, hooks, brackets, towel rails, switch-plates and other protective plates. Subheading notes 1. Within any one heading of this chapter, polymers (including copolymers) and chemically modified polymers are to be classified according to the following provisions: (a) where there is a subheading named ‘Other’ in the same series: (1) the designation in a subheading of a polymer by the prefix ‘poly’ (for example, polyethylene and polyamide-6,6) means that the constituent monomer unit or monomer units of the named polymer taken together must contribute 95 % or more by weight of the total polymer content; (2) the copolymers named in subheadings 3901 30, 3901 40, 3903 20, 3903 30 and 3904 30 are to be classified in those subheadings, provided that the comonomer units of the named copolymers contribute 95 % or more by weight of the total polymer content; (3) chemically modified polymers are to be classified in the subheading named ‘Other’, provided that the chemically modified polymers are not more specifically covered by another subheading; (4) polymers not meeting (1), (2) or (3) above, are to be classified in the subheading, among the remaining subheadings in the series, covering polymers of that monomer unit which predominates by weight over every other single comonomer unit. For this purpose, constituent monomer units of polymers falling in the same subheading shall be taken together. Only the constituent comonomer units of the polymers in the series of subheadings under consideration are to be compared; (b) where there is no subheading named ‘Other’ in the same series: (1) polymers are to be classified in the subheading covering polymers of that monomer unit which predominates by weight over every other single comonomer unit. For this purpose, constituent monomer units of polymers falling in the same subheading shall be taken together. Only the constituent comonomer units of the polymers in the series under consideration are to be compared; (2) chemically modified polymers are to be classified in the subheading appropriate to the unmodified polymer. Polymer blends are to be classified in the same subheading as polymers of the same monomer units in the same proportions. 2. For the purposes of subheading 3920 43, the term ‘plasticisers’ includes secondary plasticisers. Additional note 1. Where the woven, knitted or crocheted fabrics, felt or nonwovens are present merely for reinforcing purposes, gloves, mittens or mitts impregnated, coated or covered with cellular plastics belong to Chapter 39, even if they are: — made up from woven, knitted or crocheted fabrics (other than those of heading 5903), felt or nonwovens impregnated, coated or covered with cellular plastics, or — made up from unimpregnated, uncoated or uncovered woven, knitted or crocheted fabrics, felt or nonwovens and subsequently impregnated, coated or covered with cellular plastics. (Note 3(c) to Chapter 56 and note 2(a)(5) to Chapter 59).

Notes to section VII

PLASTICS AND ARTICLES THEREOF; RUBBER AND ARTICLES THEREOF Notes 1. Goods put up in sets consisting of two or more separate constituents, some or all of which fall in this section and are intended to be mixed together to obtain a product of Section VI or VII, are to be classified in the heading appropriate to that product, provided that the constituents are: (a) having regard to the manner in which they are put up, clearly identifiable as being intended to be used together without first being repacked; (b) presented together; and (c) identifiable, whether by their nature or by the relative proportions in which they are present, as being complementary one to another. 2. Except for the goods of heading 3918 or 3919, plastics, rubber, and articles thereof, printed with motifs, characters or pictorial representations, which are not merely subsidiary to the primary use of the goods, fall in Chapter 49.

Other explanatory notes for the chapter

General The HS Explanatory Note to Chapter 39, General, ‘Combinations of plastics and materials other than textiles’, point (d), applies, mutatis mutandis, to combinations of carbon fibres and plastics.

Note 4 Calculation of mass ratios of monomer units in copolymers: The mass ratios of the respective monomer units in copolymer chains are calculated based on the molecular structure of the copolymer (not the starting materials), taking into account the formation reaction of the polymer. When applicable, the atom linking two adjacent monomer units is attributed to the monomer unit from which the atom originates. The following examples illustrate the calculation of the monomer unit content in copolymers: — In poly(ethylene terephthalate), which is a polyester comprised of terephthalic acid and ethylene glycol moieties, both alcoholic oxygens are attributed to the glycol monomer unit. Hence, ethylene glycol is calculated as C2H4O2, and terephthalate is calculated as C8H4O2. — In polyamide-6,6, which is a polyamide comprised of hexamethylenediamine and adipic acid, both nitrogen atoms are attributed to the diamine monomer unit. Hence, hexamethylenediamine is calculated as C6H14N2 and adipic acid is calculated as C6H8O2.

Note 6 The term ‘solutions’, used both in this note and in note 4 to Chapter 32, does not apply to colloidal solutions.

Sources: Combined Nomenclature 2026, Annex I to Regulation (EEC) No 2658/87 (CELEX 32025R1926), and the Explanatory Notes to the Combined Nomenclature (CELEX 02019XC0329(02)-20260213). The section and chapter notes are legally binding; the explanatory notes are guidance. EUR-Lex

UK advance tariff rulings for 3925000000

Rulings of HM Revenue & Customs for goods with UK commodity codes that start like this EU code. The UK tariff differs from the EU tariff, so these rulings are guidance for the EU.

  • UK 3925901000 Valid Mar 5, 2024 to Mar 4, 2027 · Ruling 600009614 on GOV.UK

    Green coloured moulded plastic plugs designed for use in the installation of underfloor and wall heating systems. Holes for the plugs are drilled in the substrate which they are to be inserted into. The drill size is dependant on the hardness of the substrate.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)S: GIR 1 - Has been used to classify this product by the terms of heading 3925 - Builders' ware of plastics, not elsewhere specified or included. GIR 5B - Has been used to identify the type of packaging: Packaged in a 10g plastic box of 100 pieces. GIR 6 Has been used to classify the goods to subheading level 392590 - other than elsewhere specified in this heading. 8 digit Code: 39259010 - Fittings and mountings intended for permanent installation in or on doors, windows, staircases, walls or other parts of buildings. Also classified in accordance with: HSENS to 39.25

  • UK 3925908000 Valid Apr 17, 2024 to Apr 16, 2027 · Ruling 600010268 on GOV.UK

    Composite fencing panels made from wood powder, plastic resin and additional chemicals. The goods are used to make outdoor fencing. The various components (WPC fence posts, WPC fence panels, WPC fence post caps, post supports and fixings) come packed in a plastic wrapping and cardboard boxes.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) Classification has been determined in accordance with the following: General Interpretative Rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 3925: Builders' ware of plastics, not elsewhere specified or included GIR 5b has been used to identify the packaging GIR 6 has been used to classify this product by the terms of heading 392590: Other than elsewhere specified 8 Digit code 39259080: Other than fittings and mountings intended for perma-nent installation in or on doors, windows, staircases, walls or other parts of buildings, other than Trunking, ducting and cable trays for electrical circuits Also classified in …

  • UK 3925908000 Valid Jul 10, 2024 to Jul 9, 2027 · Ruling 600010674 on GOV.UK

    Upstand trim reinforced plastic moulded roof trims Materials: Polyester resin (65% +/- 5%) and glass fibre reinforcement (35% +/- 5%) Length: 3 metres Range: B230 ( 105 mm high) B260 ( 125 mm high) B300 ( 180 mm high) Colour: Grey Function: Fitted to edge of the roof to prevent water run-off

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 3925 - Builders' ware of plastics, not elsewhere specified or included GIR 6 has been used to classify the goods to subheading level 392590 – Other 8 Digit Code 39259080 – Other than Fittings and mountings intended for permanent installation in or on doors, windows, staircases, walls or other parts of buildings; other than trunking, ducting and cable trays for electrical circuits Also classified in accordance with: Chapter 39 Notes 1 and 11 Harmonised System Explanatory Notes (HSENs) to 3925

+ 1 more
  • UK 3925908000 Valid Sep 16, 2025 to Sep 15, 2028 · Ruling 600013586 on GOV.UK

    The Antenna Hub Floor Assembly is a structural flooring solution designed for use within a satellite communication ground system. It consists of an open-grid panel manufactured from Glass Reinforced Plastic (GRP), a durable composite material made by molding fiberglass rovings with a thermosetting resin. This is a one-piece grating panel that is lightweight, corrosion-resistant, and capable of withstanding heavy foot traffic in demanding environments. The top surface of the GRP grating features an anti-slip finish, providing excellent traction and slip resistance, particularly in areas exposed to moisture or outdoor conditions. This makes it suitable for pedestrian access in technical installations. The floor assembly is supported by fixed bracketry designed to secure the GRP panels in place. It is intended for permanent installation and provides a stable, elevated walking surface that allows access to various satellite communication equipment housed in the hub equipment rack, which is located at the rear of the antenna. This configuration facilitates maintenance and inspection of critical communication components while maintaining safety and accessibility standards. An important functional feature of the assembly is the integration of a fixed brass earth bar, which is mounted directly onto the GRP flooring. This earth bar serves as a common grounding point for all hub equipment, ensuring electrical safety. The use of brass, a conductive copper-zinc alloy, ensures reliable and corrosion-resistant performance in outdoor or semi-enclosed environments. The overall assembly is a non-electrical structural component, but it plays a vital role in supporting and grounding electrical and RF equipment within the satellite ground station infrastructure. The items are assembled and carefully packed in protective wrapping for shipment.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General Interpretative Rules (GIRs) GIR 1 has been used to classify this product by the terms of heading 3925 - builders' ware of plastics, not elsewhere specified or included GIR 5b has been used to identify packaging GIR 6 has been used to classify the goods to subheading level 392590 – other than elsewhere specified in this heading 8 Digit Code 39259080 - other than elsewhere specified or included Also classified in accordance with: Chapter 39 Note 11(b) Harmonised System Explanatory Notes (HSENs) to heading 3925

Source: HM Revenue & Customs, Advance Tariff Rulings. Contains public sector information licensed under the Open Government Licence v3.0.

Restrictions and flags for 3925000000

  • Russia sanctions: import ban Regulation (EU) No 833/2014, Annex XXI 3925

    Art. 3i, goods generating significant revenue for Russia

    Read the act on EUR-Lex
  • Russia sanctions: export ban Regulation (EU) No 833/2014, Annex XXIII 3925

    Art. 3k, goods contributing to Russian industrial capacity

    Read the act on EUR-Lex

For orientation only. Check the act before you rely on a flag; thresholds, derogations and exceptions are not shown in full.

Import VAT in the EU

  • Austria 20 %
  • Belgium 21 %
  • Bulgaria 20 %
  • Croatia 25 %
  • Cyprus 19 %
  • Czechia 21 %
  • Denmark 25 %
  • Estonia 24 % maybe 9 %
  • Finland 25.5 %
  • France 20 %
  • Germany 19 %
  • Greece 24 % maybe 13 %
  • Hungary 27 %
  • Ireland 23 %
  • Italy 22 %
  • Latvia 21 %
  • Lithuania 21 %
  • Luxembourg 17 %
  • Malta 18 %
  • Netherlands 21 %
  • Poland 23 %
  • Portugal 23 %
  • Romania 21 %
  • Slovakia 23 %
  • Slovenia 22 %
  • Spain 21 %
  • Sweden 25 %

Standard rate per member state, on the customs value, the duty and transport to the destination. Reduced rates often depend on the use or the buyer and apply only where the country provides them for these goods. Source: European Commission, Taxes in Europe Database, as of Nov 2, 2026.

Rules of origin

Preferential rules of origin for subheading 392500 depend on the trade agreement. The Commission publishes them in Access2Markets.

Rules of origin on Access2Markets

Information

When importing or exporting "Builders' ware of plastics, not elsewhere specified or included", it is crucial to have the correct HS code or TARIC code. The HS code 3925000000 80 serves as the standard code for this product, ensuring that the appropriate duties and taxes are applied when crossing international borders.

To ensure your business transactions run smoothly when importing or exporting "Builders' ware of plastics, not elsewhere specified or included", consider the following points:

  1. Inform yourself about the specific import and export regulations in the countries involved. This includes possible restrictions, taxes, and duties applicable to "Builders' ware of plastics, not elsewhere specified or included".
  2. Check if any additional licenses, permits, or certificates are required to import "Builders' ware of plastics, not elsewhere specified or included" into the destination country or export it from the country of origin.
  3. Make sure your trading partners have valid identification numbers, such as EORI numbers (Economic Operators Registration and Identification) in the EU, to streamline trade and minimize delays.
  4. Ensure that all trade- and customs-related documents (such as commercial invoices, packing lists, certificates of origin, and insurance policies) are accurately completed and adhere to the respective national regulations.
  5. Keep an eye on the current exchange rates, as well as packaging, shipping, and insurance costs, to accurately calculate trade costs.

In summary, the HS code or TARIC code for "Builders' ware of plastics, not elsewhere specified or included" is 3925000000 80. Make sure you accurately use this code in all your trade and customs documents to guarantee smooth and hassle-free transactions. With these tips, you'll be better prepared for the challenges of international trade and can successfully import and export "Builders' ware of plastics, not elsewhere specified or included".

HS Code structure

39
Chapter
25
Heading
00
Subheading
00
CN Subheading
00
TARIC Subheading
80
Additional TARIC codes

1. Chapter

There are 21 different sections, which are divided into 96 chapters. Exceptional chapters include chapter 77, which is reserved for future use, chapters 98 and 99, which are limited at national level, and chapter 99, which is a specific code for temporary changes. In the example above, chapter 39 was selected for plastics and articles thereof

2. Heading

The heading determines the specific category within a certain chapter. In the example above, the 25 refers to Builders' ware of plastics, not elsewhere specified or included.

HS Code tree structure

3900000000 80

Chapter PLASTICS AND ARTICLES THEREOF

3925000000 80

Builders' ware of plastics, not elsewhere specified or included

3925100000 80

- Reservoirs, tanks, vats and similar containers, of a capacity exceeding 300 litres

3925200000 80

- Doors, windows and their frames and thresholds for doors

3925300000 80

- Shutters, blinds (including venetian blinds) and similar articles and parts thereof

3925900000 80

- Other

3925901000 80

- - Fittings and mountings intended for permanent installation in or on doors, windows, staircases, walls or other parts of buildings

3925902000 80

- - Trunking, ducting and cable trays for electrical circuits

3925908000 80

- - Other