Import trade restrictions for 4016000000 80
This table contains information on trade restrictions for the import of goods into the EU and the EU into third countries. The table contains information on trade restrictions which are imposed due to customs unions, preferences, tariff quotas, customs unions, veterinary controls, third country duties and non-preferential tariff quotas.
| Origin country | Start | Duty / Tax | Legal base Measure type | |
|---|---|---|---|---|
| North Macedonia MK | 01-01-2009 | 0 % | Tariff preference 142 | |
| Bosnia and Herzegovina BA | 01-01-2009 | 0 % | Tariff preference 142 | |
| Ukraine UA | 01-01-2016 | 0 % | Tariff preference 142 | |
2020 | GSP - General arrangements 2020 | 01-01-2026 | 0 % | Tariff preference 142 |
| Singapore SG | 01-01-2027 | 0 % | Tariff preference 142 | |
XS | Serbia XS | 01-02-2010 | 0 % | Tariff preference 142 |
| Japan JP | 01-02-2020 | 0 % | Tariff preference 142 | |
| Peru PE | 01-03-2013 | 0 % | Tariff preference 142 | |
| Albania AL | 01-04-2009 | 0 % | Tariff preference 142 | |
| Kosovo XK | 01-04-2016 | 0 % | Tariff preference 142 | |
| Montenegro ME | 01-05-2010 | 0 % | Tariff preference 142 | |
| New Zealand NZ | 01-05-2024 | 0 % | Tariff preference 142 | |
| Korea, Republic of (South Korea) KR | 01-07-2011 | 0 % | Tariff preference 142 | |
| Colombia CO | 01-08-2013 | 0 % | Tariff preference 142 | |
| Viet Nam VN | 01-08-2020 | 0 % | Tariff preference 142 | |
1011 | ERGA OMNES 1011 | 01-11-2018 | 0 % | Airworthiness tariff suspension 119 |
| South Africa ZA | 10-10-2016 | 0 % | Tariff preference 142 | |
| Armenia AM | 10-10-2026 – 11-10-2028 | 0 % | Tariff preference 142 | |
| EU-Canada agreement: re-imported goods 1006 | 21-09-2017 | 0 % | Tariff preference 142 | |
| Canada CA | 21-09-2017 | 0 % | Tariff preference 142 | |
| Singapore SG | 21-11-2019 – 31-12-2026 | 0 % | Tariff preference 142 | |
| Faroe Islands FO | 01-01-1997 | 0 % | Tariff preference 142 | |
XL | Melilla XL | 01-01-1999 | 0 % | Accession act0001/85 Tariff preference 142 |
| Occupied palestinian Territory PS | 01-01-2001 | 0 % | Tariff preference 142 | |
| Türkiye TR | 01-01-2006 | 0 % | Customs union duty 106 | |
| San Marino SM | 01-01-2006 | 0 % | Customs union duty 106 | |
| Andorra AD | 01-01-2006 | 0 % | Customs union duty 106 | |
| EU-Switzerland agreement: re-imported goods 1007 | 01-01-2007 | 0 % | Tariff preference 142 | |
2027 | GSP+ (incentive arrangement for sustainable development and good governance) 2027 | 01-01-2014 | 0 % | Tariff preference 142 |
2005 | GSP-EBA (Special arrangement for the least-developed countries - Everything But Arms) 2005 | 01-01-2014 | 0 % | Tariff preference 142 |
| Moldova, Republic of MD | 01-01-2016 | 0 % | Tariff preference 142 | |
| Ecuador EC | 01-01-2017 | 0 % | Tariff preference 142 | |
2080 | OCTs (Overseas Countries and Territories) 2080 | 01-01-2021 | 0 % | Tariff preference 142 |
| United Kingdom GB | 01-01-2021 | 0 % | Tariff preference 142 | |
| Ghana GH | 01-01-2027 | 0 % | Tariff preference 142 | |
| Chile CL | 01-02-2025 | 0 % | Tariff preference 142 | |
| Tunisia TN | 01-03-1998 | 0 % | Tariff preference 142 | |
| Morocco MA | 01-03-2000 | 0 % | Tariff preference 142 | |
| Lebanon LB | 01-04-2006 | 0 % | Tariff preference 142 | |
| Jordan JO | 01-05-2002 | 0 % | Tariff preference 142 | |
| Egypt EG | 01-06-2004 | 0 % | Tariff preference 142 | |
XC | Ceuta XC | 01-07-1991 | 0 % | Accession act0001/85 Tariff preference 142 |
2012 | EEA - European Economic Area 2012 | 01-07-2007 | 0 % | Tariff preference 142 |
| Mexico MX | 01-07-2016 | 0 % | Tariff preference 142 | |
| Kenya KE | 01-07-2024 | 0 % | Tariff preference 142 | |
| United States US | 01-07-2026 | 0 % | Tariff preference 142 | |
| Syria SY | 01-08-1994 | 0 % | Tariff preference 142 | |
2200 | Central America 2200 | 01-08-2013 | 0 % | Tariff preference 142 |
| Algeria DZ | 01-09-2005 | 0 % | Tariff preference 142 | |
| Georgia GE | 01-09-2014 | 0 % | Tariff preference 142 | |
1011 | ERGA OMNES 1011 | 01-11-2026 | 2 EUR | Union handling fee 800 |
1011 | ERGA OMNES 1011 | 01-11-2026 | 3 EUR | Low-value consignment customs duty 107 |
| Ivory Coast CI | 02-12-2019 | 0 % | Tariff preference 142 | |
2000 | Preferential origin in accordance with the Agreement in the form of an Exchange of Letters between the European Union and the Kingdom of Morocco on the amendment of Protocols 1 and 4 to the Euro-Mediterranean Agreement establishing an association between the European Communities and their Member States, of the one part, and the Kingdom of Morocco, of the other part. 2000 | 03-10-2025 | 0 % | Tariff preference 142 |
| Cameroon CM | 04-08-2014 | 0 % | Tariff preference 142 | |
1035 | SADC EPA 1035 | 10-10-2016 | 0 % | Tariff preference 142 |
1034 | Eastern and Southern Africa States 1034 | 14-05-2012 | 0 % | Tariff preference 142 |
| Ghana GH | 15-12-2016 – 31-12-2026 | 0 % | Tariff preference 142 | |
| Israel IL | 16-05-2023 | 0 % | Tariff preference 142 | |
| Solomon Islands SB | 17-05-2020 | 0 % | Tariff preference 142 | |
| Switzerland CH | 20-12-1972 | 0 % | Tariff preference 142 | |
| Papua New Guinea PG | 20-12-2009 | 0 % | Tariff preference 142 | |
| Fiji FJ | 28-07-2014 | 0 % | Tariff preference 142 | |
1033 | CARIFORUM 1033 | 29-12-2008 | 0 % | Tariff preference 142 |
| Samoa WS | 31-12-2018 | 0 % | Tariff preference 142 |
| Origin country | Start | Duty / Tax | Legal base Measure type | |
|---|---|---|---|---|
| Belarus BY | 24-04-2026 | Document required banned without it | Import control 760 | |
| Russian Federation RU | 26-07-2026 – 31-12-2027 | Document required banned without it | Import control 762 | |
| Ukraine UA | 24-06-2026 | Document required banned without it | Import control 762 | |
| Ukraine UA | 24-06-2026 | Document required banned without it | Import control 760 |
Explanation of trade restrictions
Erga Omnes means "for all".
Third countries are countries that are not part of the EU.
GSP means "Generalised System of Preferences".
GSP Plus means "Generalised System of Preferences Plus".
European Economic Area (EEA) means all EU member states and Iceland, Liechtenstein and Norway.
OCTs stands for "Overseas Countries and Territories". They are countries and territories that are not part of the EU. More information
CARIFORUM is a regional economic integration organisation comprising 15 Caribbean Community (CARICOM) countries and the Dominican Republic.
SADC EPA stands for "Southern African Development Community - Economic Partnership Agreement".
Duty means "customs duties".
Estimate the import cost for 4016000000
- Customs value €1,000.00
- No third-country duty is recorded for this origin.
- Import VAT 19 % €190.00
- Total €1,190.00
May be lower under conditions:
- Airworthiness tariff suspension: 0 %
An estimate only. The customs value is the price including transport and insurance to the EU border. Excise duties, other fees and producer-specific anti-dumping rates are not included. Preferential rates need valid proof of origin. Country groups and exclusions: TARIC, as of November 2026.
Export measures for 4016000000
What applies when these goods leave the EU: export controls, dual-use and other authorisations, bans per destination and the supplementary unit of the export declaration.
| Destination | Start | Duty / Tax | Legal base Measure type | |
|---|---|---|---|---|
| Belarus BY | 24-04-2026 | Document required banned without it | Export control 766 | |
| Russian Federation RU | 26-07-2026 | Document required banned without it | Export control 709 |
History
Duty rates and measures for this code over time (yearly snapshots).
Preferential rules of origin for 4016000000
What the goods must meet to count as originating in a partner country and get the preferential duty, per agreement.
Autonomous Trade Preferences (Western Balkans) · Kosovo
EU-Chile Association Agreement · Chile
EU-Algeria Association Agreement · Algeria
EU-Egypt Association Agreement · Egypt
EU-Jordan Association Agreement · Jordan
EU-Lebanon Association Agreement · Lebanon
EU-Morocco Association Agreement · Morocco
EU-Tunisia Association Agreement · Tunisia
Rubber and articles thereof; except for: / or: Manufacture from materials of any heading, except that of the product
EPA CARIFORUM
EU Market Access Regulation (EPA) · Cameroon, Côte d’Ivoire, Ghana, Kenya
EU-Mexico Global Agreement · Mexico
EU-Palestine Interim Association Agreement · Palestine
EPA SADC · South Africa
Rubber and articles thereof; except for: / or: Manufacture in which all the materials used are classified within a heading other than that of the product
Generalised Scheme of Preferences (GSP, GSP+, EBA) · Armenia, India, Kenya, Pakistan, Samoa, Solomon Islands, Syria, Vietnam
EU-Jordan Association Agreement (relaxed rules, 2016) · Jordan
Rubber and articles thereof; except for: / or: Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
EU-Canada CETA · Canada
A change from any other heading.
EU-Colombia/Peru/Ecuador Trade Agreement · Colombia, Ecuador, Peru
Rubber and articles thereof; except for: / or: Manufacture from materials of any heading, except that of the product / or: Manufacture in which the value of all the materials used does not exceed 60 per cent of the ex works price of the product
EU-Japan EPA · Japan
CTH; MaxNOM 50 % (EXW); or RVC 55 % (FOB).
EU-Singapore FTA · Singapore
Rubber and articles thereof; except for: / or: Manufacture from materials of any heading, except that of the product or Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
Source: European Commission, Access2Markets (CC BY 4.0, shortened). The text of the agreement prevails. Access2Markets
Legal and explanatory notes for 4016000000
4016 91 00 CN Explanatory Notes: Floor coverings and mats
See the HS Explanatory Note to heading 4016, second paragraph, (2).
4016 99 52 - 4016 99 97 CN Explanatory Notes: to 4016 99 97
Other In addition to the products referred to in the HS Explanatory Note to heading 4016, second paragraph, (7) to (14), these subheadings also include pumicing blocks which, when covered with (replaceable) emery paper, are used to hand-polish certain articles.
Notes to chapter 40
Notes 1. Except where the context otherwise requires, throughout the nomenclature the expression ‘rubber’ means the following products, whether or not vulcanised or hard: natural rubber, balata, gutta-percha, guayule, chicle and similar natural gums, synthetic rubber, factice derived from oils, and such substances reclaimed. 2. This chapter does not cover: (a) goods of Section XI (textiles and textile articles); (b) footwear or parts thereof of Chapter 64; (c) headgear or parts thereof (including bathing caps) of Chapter 65; (d) mechanical or electrical appliances or parts thereof of Section XVI (including electrical goods of all kinds), of hard rubber; (e) articles of Chapter 90, 92, 94 or 96; or (f) articles of Chapter 95 (other than sports gloves, mittens and mitts and articles of headings 4011 to 4013). 3. In headings 4001 to 4003 and 4005, the expression ‘primary forms’ applies only to the following forms: (a) liquids and pastes (including latex, whether or not pre-vulcanised, and other dispersions and solutions); (b) blocks of irregular shape, lumps, bales, powders, granules, crumbs and similar bulk forms. 4. In note 1 to this chapter and in heading 4002, the expression ‘synthetic rubber’ applies to: (a) unsaturated synthetic substances which can be irreversibly transformed by vulcanisation with sulphur into non-thermoplastic substances which, at a temperature between 18 and 29 °C, will not break on being extended to three times their original length and will return, after being extended to twice their original length, within a period of five minutes, to a length not greater than one-and-a-half times their original length. For the purposes of this test, substances necessary for the cross-linking, such as vulcanising activators or accelerators, may be added; the presence of substances as provided for by note 5(B)(2) and (3) is also permitted. However, the presence of any substances not necessary for the cross-linking, such as extenders, plasticisers and fillers, is not permitted; (b) thioplasts (TM); and (c) natural rubber modified by grafting or mixing with plastics, depolymerised natural rubber, mixtures of unsaturated synthetic substances with saturated synthetic high polymers provided that all the abovementioned products comply with the requirements concerning vulcanisation, elongation and recovery in (a) above. 5. (A) Headings 4001 and 4002 do not apply to any rubber or mixture of rubbers which has been compounded, before or after coagulation, with: (1) vulcanising agents, accelerators, retarders or activators (other than those added for the preparation of pre-vulcanised rubber latex); (2) pigments or other colouring matter, other than those added solely for the purpose of identification; (3) plasticisers or extenders (except mineral oil in the case of oil-extended rubber), fillers, reinforcing agents, organic solvents or any other substances, except those permitted under (B). (B) The presence of the following substances in any rubber or mixture of rubbers shall not affect its classification in heading 4001 or 4002, as the case may be, provided that such rubber or mixture of rubbers retains its essential character as a raw material: (1) emulsifiers or anti-tack agents; (2) small amounts of breakdown products of emulsifiers; (3) very small amounts of the following: heat-sensitive agents (generally, for obtaining thermosensitive rubber latexes), cationic surface-active agents (generally, for obtaining electropositive rubber latexes), antioxidants, coagulants, crumbling agents, freeze-resisting agents, peptisers, preservatives, stabilisers, viscosity-control agents, or similar special-purpose additives. 6. For the purposes of heading 4004, the expression ‘waste, parings and scrap’ means rubber waste, parings and scrap from the manufacture or working of rubber and rubber goods definitely not usable as such because of cutting-up, wear or other reasons. 7. Thread wholly of vulcanised rubber, of which any cross-sectional dimension exceeds 5 mm, is to be classified as strip, rods or profile shapes, of heading 4008. 8. Heading 4010 includes conveyor or transmission belts or belting of textile fabric impregnated, coated, covered or laminated with rubber or made from textile yarn or cord impregnated, coated, covered or sheathed with rubber. 9. In headings 4001, 4002, 4003, 4005 and 4008, the expressions ‘plates’, ‘sheets’ and ‘strip’ apply only to plates, sheets and strip and to blocks of regular geometric shape, uncut or simply cut to rectangular (including square) shape, whether or not having the character of articles and whether or not printed or otherwise surface-worked, but not otherwise cut to shape or further worked. In heading 4008, the expressions ‘rods’ and ‘profile shapes’ apply only to such products, whether or not cut to length or surface-worked but not otherwise worked. Additional note 1. Where the woven, knitted or crocheted fabrics, felt or nonwovens are present merely for reinforcing purposes, gloves, mittens or mitts impregnated, coated or covered with cellular rubber belong to Chapter 40, even if they are: — made up from woven, knitted or crocheted fabrics (other than those of heading 5906), felt or nonwovens impregnated, coated or covered with cellular rubber, or — made up from unimpregnated, uncoated or uncovered woven, knitted or crocheted fabrics, felt or nonwovens and subsequently impregnated, coated or covered with cellular rubber. (Note 3(c) to Chapter 56 and note 5, last paragraph, to Chapter 59).
Notes to section VII
PLASTICS AND ARTICLES THEREOF; RUBBER AND ARTICLES THEREOF Notes 1. Goods put up in sets consisting of two or more separate constituents, some or all of which fall in this section and are intended to be mixed together to obtain a product of Section VI or VII, are to be classified in the heading appropriate to that product, provided that the constituents are: (a) having regard to the manner in which they are put up, clearly identifiable as being intended to be used together without first being repacked; (b) presented together; and (c) identifiable, whether by their nature or by the relative proportions in which they are present, as being complementary one to another. 2. Except for the goods of heading 3918 or 3919, plastics, rubber, and articles thereof, printed with motifs, characters or pictorial representations, which are not merely subsidiary to the primary use of the goods, fall in Chapter 49.
Sources: Combined Nomenclature 2026, Annex I to Regulation (EEC) No 2658/87 (CELEX 32025R1926), and the Explanatory Notes to the Combined Nomenclature (CELEX 02019XC0329(02)-20260213). The section and chapter notes are legally binding; the explanatory notes are guidance. EUR-Lex
UK advance tariff rulings for 4016000000
Rulings of HM Revenue & Customs for goods with UK commodity codes that start like this EU code. The UK tariff differs from the EU tariff, so these rulings are guidance for the EU.
- UK 4016910000 Valid Jun 19, 2024 to Jun 18, 2027 · Ruling 600010537 on GOV.UK
A rubber door mat made from vulcanised rubber. This is for indoor and outdoor use. The item is black in colour. The dimensions are 600mm x 400mm.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) Classification has been determined in accordance with the following: General Interpretative Rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 4016: Other articles of vulcanised rubber other than hard rubber GIR 6 has been used to classify this product by the terms of heading 401691: Other, floor coverings and mats Also classified in accordance with: Chapter note 1 to heading 4106 Harmonised System Explanatory Note (2) to heading 4106
- UK 4016910000 Valid May 30, 2025 to May 29, 2028 · Ruling 600012897 on GOV.UK
A four piece rubber mat set to be placed in the footwells of motor vehicles. The set includes two front and two rear mats that have anti slip backing, the two front mats have a metallic red heel pad. Will fit most vehicles. Easy to fit and wipe clean, made of hard wearing heavy duty rubber.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3(1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect- a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIRS): GIR 1 has been used to classify this product by the terms of heading 4016 - other article of vulcanised rubber other than hard rubber. GIR 6 has been used to classify the goods to subheading level 4016 91 - other; floor coverings and mats. Also classified in accordance with: Chapter note 1 to chapter 40 Harmonised Systems Explanatory Notes (HSEN)s to 4016 (2)
- UK 4016910000 Valid Jun 5, 2025 to Jun 4, 2028 · Ruling 600012898 on GOV.UK
A single all terrain rubber car mat, which can be placed in either the driver or front passengers footwell of a motor vehicle. It is a tray style mat which can collect debris. Made of vulcanised rubber of Nitrile Butadiene Rubber (NBR) and Polyvinyl Chloride (PVC) mix. Can be trimmed to fit most vehicles.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) Classification has been determined in accordance with the following: General Interpretative Rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 4016: Other articles of vulcanised rubber other than hard rubber GIR 6 has been used to classify this product by the terms of heading 401691: Other, floor coverings and mats Also classified in accordance with: Chapter note 1 to heading 4016 Harmonised System Explanatory Note (2) to heading 4016
+ 28 more
- UK 4016910000 Valid Apr 29, 2025 to Apr 28, 2028 · Ruling 600012899 on GOV.UK
Vehicles mats to put in the footwells of vehicles, for protection and to keep clean. The 2 front mats measures 69 x 45cm and the 2 rear mats measures 40 x 45cm. They are a heavy duty metallic check plate style with an anti-slip backing and easy to keep clean. Made from aluminium and Nitrile Butadiene Rubber (NBR).
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3(1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect- a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIRS): GIR 1 has been used to classify this product by the terms of heading 4016 - Other articles of vulcanised rubber other than hard rubber. GIR 6 has been used to classify the goods to subheading level 401691 - Floor coverings and mats. Also classified in accordance with The Harmonised System Explanatory Notes (HSENs) to heading 4016 note 2.
- UK 4016910000 Valid May 14, 2025 to May 13, 2028 · Ruling 600012901 on GOV.UK
A four-piece combination carpet and NBR rubber mat set in black. For use in motor vehicles, the set includes 2 front mats and 2 back mats with hard wearing heel pad. Anti-slip backing to prevent the mats from moving.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) Classification has been determined in accordance with the following: General Interpretative Rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 4016: Other articles of vulcanised rubber other than hard rubber GIR 6 has been used to classify this product by the terms of heading 401691: Other, floor coverings and mats Also classified in accordance with: Chapter note 1 to heading 4016 Harmonised System Explanatory Notes (HSEN)s to heading 4016 note (2)
- UK 4016930090 Valid Feb 12, 2025 to Feb 11, 2028 · Ruling 600012214 on GOV.UK
The product is a Below that is fitted to Jackscrews on Antennas. They are accordion-like structures designed to cover and protect two connected mechanical parts. Used to accommodate mechanical movement or vibration while maintaining a protective or sealing function and helping the reflector to move. This ensures that no moisture or environmental contaminants can enter through those moving connections The product is made from neoprene coated nylon and is custom made with a zipper. Dimensions: 240 mm OD x 148 mm ID x 2600mm long
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) Classification has been determined in accordance with the following: General Interpretative Rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 4016: Other articles of vulcanised rubber other than hard rubber GIR 6 has been used to classify this product by the terms of heading 401693: Gaskets, washers and other seals 10 Digit code 4016930090: Other than elsewhere specified Also classified in accordance with: Chapter note 1 to chapter 40 Harmonised System Explanatory Notes to heading 4016
- UK 4016930090 Valid Oct 1, 2026 to Sep 30, 2029 · Ruling 600015865 on GOV.UK
Seal Steel ring, covered on the inside with rubber. Materials: nitrile rubber NBR N-5 and 0.6mm JIS SPC steel used to prevent water and dirt ingress getting to the moving parts and to keep the grease in the bearing
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect- a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (reg 3 (1)(a)); and b. Notes to a section of chapter of the Goods Classification Table (reg 3(1)(b)). General Interpretative rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading 4016: Other articles of vulcanised rubber other than hard rubber. GIR 3 B - Has been used as the rubber is considered to be the essential character. GIR 6 - has been used to classify the goods to subheading level 401693: Other than of cellular rubber; Gaskets, washers and other seals 10 Digit Code 4016930090: Other than elsewhere specified Also classified in accordance with: The Harmonized System Explanatory Notes (HSENs) to heading 4016
- UK 4016930090 Valid Jun 25, 2026 to Jun 24, 2029 · Ruling 600015943 on GOV.UK
Pylon seal that sits between the aircraft pylon and the adjacent structure. The part in this condition can be installed on any aircraft. It is a finished part which is in the correct shape and has the installation holes cut out. The material for the seal is a type of rubber. The product is packed for commercial reasons as per aerospace standard packing specifications. The boxes the parts are put in are normally packed out with brown paper packing filler.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 4016 - Other articles of vulcanised rubber other than hard rubber. GIR 5 (b) - Has been used to identify the type of packaging. GIR 6 - Has been used to classify the goods to subheading level 4016.93 - Gaskets, washers and other seals. 10 Digit Code 4016.93.00.90 - Other than elsewhere specified in this heading. Also classified in accordance with: Chapter note 1 to chapter 40. Harmonised System Explanatory Notes (HSEN) to heading 4016.
- UK 4016999190 Valid Apr 21, 2024 to Apr 20, 2027 · Ruling 600010207 on GOV.UK
The product is rubber tracks that are used for military personnel carrier halftrack vehicles which are collectors vehicles, particularly M3 Whites Halftrack model. The tracks are made of steel wire that are covered in vulcanised in rubber. They are packaged on pallets that are strapped and shrink wrapped.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules GIR’s: GIR1 has been used to classify this product by the terms of heading 4016 - for other articles of vulcanised rubber other than hard rubber GIR 3 b - Has been used as the vulcanised rubber is considered to be the essential character. GIR 5 (b) has been used to identify the type of packaging – palletised GIR 6 has been used to classify this product by the terms of heading 401699 – Other than or cellular rubber; other than elsewhere specified 8-digit code: 40169991 - other than for motor vehicles of heading 8701 to 8705; rubber-to-metal bonded parts 10-digit code: 4016999190 - other than for technical uses, for use in civil …
- UK 4016999790 Valid Dec 4, 2023 to Dec 3, 2026 · Ruling 600007884 on GOV.UK
Pack of two brightly coloured balls for dogs, designed to look like tennis balls. Each has a two colour design, in yellow and orange, and in yellow and blue. They are constructed with a rubber core, covered with a felt type material and have a seam running around the centre. The balls are for sale to trade and come packaged in a polybag with a cardboard header illustrating that they are intended for dogs. Weight: 63g
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg. 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect: a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg. 3(1)(b)). General Interpretative Rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 4016 Other articles of vulcanised rubber other than hard rubber GIR 5 (b) - Has been used to identify the type of packaging – a polybag with a cardboard header GIR 6 - Has been used to classify the goods to subheading level 401699 Other than of cellular rubber; Other than previously specified in the Heading 8 Digit Code 40169997 Other than For motor vehicles of headings 8701 to 8705; Other than Rubber-to-metal bonded parts 10 Digit Code 4016999790 Other than For technical uses, for use in civil aircraft or Tyre moulding bladder Also classified in …
- UK 4016999790 Valid Feb 6, 2024 to Feb 5, 2027 · Ruling 600009513 on GOV.UK
Pack of three brightly coloured lime green balls produced to imitate a tennis ball. The balls are intended as a toy for dogs to play with. They are constructed with an 80% rubber core, covered with a 20% glue & polyester felt type material. The balls have a central seam running around the circumference created by the processing method. A thin band of white rubber is decorating the ball. The balls are for retail sale and come packaged in a plastic net with a cardboard header illustrating the product, that they are intended for the entertainment of dogs. Weight: 60g
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg. 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect: a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg. 3(1)(b)). General Interpretative Rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 4016 Other articles of vulcanised rubber other than hard rubber. GIR 5 (b) - Has been used to identify the type of packaging – a plastic net with a cardboard header and euro hook. GIR 6 - Has been used to classify the goods to subheading level 401699 Other than of cellular rubber; Other than previously specified in the heading. 8 Digit Code 40169997 Other than for motor vehicles of headings 8701 to 8705; Other than Rubber-to-metal bonded parts. 10 Digit Code 4016999790 Other than for technical uses, for use in civil aircraft or Tyre moulding …
- UK 4016999790 Valid Jul 17, 2024 to Jul 16, 2027 · Ruling 600010636 on GOV.UK
Foldable magnetic pick up tool 81cms in length Grips of the tool are made of thermoplastic rubber Put 2 parts of pick-up tool together and press the handle to grab small objects or pick metal objects with magnet. Packing Style: HANG TAG
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: Gir 1 - has been used to classify this product by the terms of heading 4016 - Other articles of vulcanised rubber other than hard rubber Gir 3(b) – has been used as the rubber grips on the pick up claws are considered the essential character. Gir 5(b) - has been used to identify the type of packaging (cardboard box) Gir 6 - has been used to classify the goods to subheading level 401699 – Other than elsewhere specified within this subheading Eight digit code – 40169997 Other than rubber-to-metal bonded parts Ten Digit Code – 4016999790 Other than elsewhere specified Also classified in accordance with: Harmonised …
- UK 4016999790 Valid Dec 17, 2024 to Dec 16, 2027 · Ruling 600010762 on GOV.UK
Optical Lens Occluder A silicone lens cover made from Vinyl Methyl Silicone. This is used to aid blurred or double vision. The consumer will mount them onto spectacle frames. The product is manufactured using HCR silicone rubber. The silicone is made from Vinyl Methyl Silicone. Packed into cardboard pouch and then into a plastic zip-lock bag. Then bulk packed into a cardboard box ready for despatch.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General Interpretative Rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 4016 - Other articles of vulcanised rubber other than hard rubber GIR 6 has been used to classify this product by the terms of heading 401699 - Other than elsewhere specified 8- digit code 40169997 - Other than rubber-to-metal bonded parts 10- digit code 4016999790 - Other than elsewhere specified Also classified in accordance with: Chapter 40 Note 1 Harmonised System Explanatory Notes to heading 4016
- UK 4016999790 Valid Dec 16, 2024 to Dec 15, 2027 · Ruling 600011443 on GOV.UK
An external cable protector designed to protect the cables from small vehicles and pedestrian traffic. Product is made from 90% vulcanised, non-cellular rubber and 10% plastic with 2 channels, suitable for outdoor and indoor use. Product measures 990mm x 240mm x 50mm and is packaged in a carton.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading 4016 - Other articles of vulcanised rubber other than hard rubber GIR 5(b) - has been used to identify the type of packaging as a carton Gir 6 - has been used to classify the goods to subheading level 401699 – Other than elsewhere specified within this subheading Eight digit code – 40169997 Other than rubber-to-metal bonded parts Ten Digit Code – 4016999790 Other than elsewhere specified Also classified in accordance with: Harmonised System Explanatory Notes (HSENs) to heading 4016
- UK 4016999790 Valid Dec 16, 2024 to Dec 15, 2027 · Ruling 600011444 on GOV.UK
An external cable protector designed to protect the cables from small vehicles and pedestrian traffic. Product is made from 90% vulcanised, non-cellular rubber and 10% plastic with 3 channels, suitable for outdoor and indoor use. Product measures 900mm x 500mm x 70mm and is packaged in a carton.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading 4016 - Other articles of vulcanised rubber other than hard rubber GIR 5(b) - has been used to identify the type of packaging as a carton Gir 6 - has been used to classify the goods to subheading level 401699 – Other than elsewhere specified within this subheading Eight digit code – 40169997 Other than rubber-to-metal bonded parts Ten Digit Code – 4016999790 Other than elsewhere specified Also classified in accordance with: Harmonised System Explanatory Notes (HSENs) to heading 4016
- UK 4016999790 Valid Dec 16, 2024 to Dec 15, 2027 · Ruling 600011445 on GOV.UK
An external cable protector ramp designed to protect the cables from vehicles and pedestrian traffic. Product is made from 90% vulcanised, non-cellular rubber and 10% plastic with 5 channels, suitable for outdoor and indoor use. Product measures 900mm x 600mm x 80mm and is packaged in a carton.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading 4016 - Other articles of vulcanised rubber other than hard rubber GIR 5(b) - has been used to identify the type of packaging as a carton Gir 6 - has been used to classify the goods to subheading level 401699 – Other than elsewhere specified within this subheading Eight digit code – 40169997 Other than rubber-to-metal bonded parts Ten Digit Code – 4016999790 Other than elsewhere specified Also classified in accordance with: Harmonised System Explanatory Notes (HSENs) to heading 4016
- UK 4016999790 Valid Dec 16, 2024 to Dec 15, 2027 · Ruling 600011446 on GOV.UK
An internal cable protector designed to protect the cables from pedestrian traffic. Product is made from 90% vulcanised, non-cellular rubber and 10% plastic with 1 channel, suitable for outdoor and indoor use. Product measures 1010mm x 138mm x 20mm and is packaged in a carton.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading 4016 - Other articles of vulcanised rubber other than hard rubber GIR 5(b) - has been used to identify the type of packaging as a carton Gir 6 - has been used to classify the goods to subheading level 401699 – Other than elsewhere specified within this subheading Eight digit code – 40169997 Other than rubber-to-metal bonded parts Ten Digit Code – 4016999790 Other than elsewhere specified Also classified in accordance with: Harmonised System Explanatory Notes (HSENs) to heading 4016
- UK 4016999790 Valid Apr 10, 2025 to Apr 9, 2028 · Ruling 600012661 on GOV.UK
These are rubber bands made from 100% pure stretch latex to be used for fishing pellet baits between 6mm - 14mm. They can be used on a hair rig set-up pulled into hard pellets when fishing for carp on fisheries. They are an off white, cream colour. They are packed in a plastic bag in a pack of 50.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect- a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (reg 3 (1)(a)); and b. Notes to a section of chapter of the Goods Classification Table (reg 3(1)(b)). General Interpretative Rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 4016 - Other articles of vulcanised rubber other than hard rubber. GIR 5(b) has been used to identify the type of packaging. The product is packed 50 to a plastic bag. GIR 6 has been used to classify the goods to subheading level 401699 - Other than of cellular rubber; Other than elsewhere specified. 8 Digit Code 40169997 - Other than for motor vehicles of headings 8701 to 8705; Other than Rubber-to-metal bonded parts. 10 Digit Code 4016999790 - Other than for technical uses, for use in civil aircraft; Other than tyre moulding bladder. Also …
- UK 4016999790 Valid May 27, 2025 to May 26, 2028 · Ruling 600012918 on GOV.UK
Wheels for self-propelled Plastic waste bins (plastic wheelie bins) Tyres made from recycled rubber granulate (rubber) bonded with glue. Wheel Rim with neck made of recycled plastic. The largest part of the wheel construction is the tyre made of rubber. 2 wheels are attached to 1 axle which is fitted to the bottom of the plastic bins to aid movement/transportation of the bins. Pin and spring made of steel.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General Interpretative Rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 4016 - Other articles of vulcanised rubber other than hard rubber. GIR 3(b) has been used as the solid rubber tyre part of the wheel, which is bonded to the plastic rim, is considered to be the essential character. GIR 6 has been used to classify this product by the terms of heading 401699 - Other than elsewhere specified. 8- digit code 40169997 - Other than rubber-to-metal bonded parts. 10- digit code 4016999790 - Other than elsewhere specified or included in this heading Also classified in accordance with: Chapter 40 Note 1 HSENs to heading 4016
- UK 4016999790 Valid Jun 30, 2025 to Jun 29, 2028 · Ruling 600013236 on GOV.UK
The product is used in telecommunication systems to keep cables safe and secure in outdoor environments. They are round with a various size of holes to fit cables through. They are 4 inches wide with a hosepipe clip around for securing, and are used to protect cables from moisture, dust and debris entering, and keeping a weather tight seal at the entry and exit points. They also protect cables from stress and abrasion. The product is packaged as part of a consignment of goods, then on a crate. They are made from EPDM rubber.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3(1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect- a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg (1)(b)). General Interpretative Rules (GIRs): GIR 1 has been used to classify this product by the terms of heading 4016 - Other articles of vulcanised rubber other than hard rubber. GIR 5(b) has been used to identify the type of packaging. Packed on a crate. GIR 6 has been used to classify the goods to subheading level 401699 - Other than of cellular rubber; Other than elsewhere specified. 8 Digit Code 40169997 - Other than for motor vehicles of headings 8701 to 8705; Other than rubber-to-metal bonded parts. 10 Digit Code - 4016999790 - Other than for technical use, for use in civil aircraft or tyre moulding bladder. Also classified in accordance with the …
- UK 4016999790 Valid Sep 17, 2025 to Sep 16, 2028 · Ruling 600013614 on GOV.UK
A toy for dogs. Pack of 3 tennis balls designed to entertain dogs. The surface material is made of felt polyester with an inner of non-cellular rubber. With a hollow middle. Product diameter: 6.3cm.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg. 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect: a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg. 3(1)(b)). General Interpretative Rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 4016 - Other articles of vulcanised rubber other than hard rubber GIR 3B has been used as the non- cellular rubber is considered to be the essential character. GIR 5B has been used to identify the type of packaging. GIR 6 has been used to classify the goods to subheading level 401699 - Other than elsewhere specified 8 digit code 40169997 - Other than rubber-to-metal bonded parts 10 digit code 4016999790 - Other than for technical uses, for use in civil aircraft or tyre moulding bladder Also classified in accordance with: Chapter 40 Note 1 Chapter 95 …
- UK 4016999790 Valid Sep 17, 2025 to Sep 16, 2028 · Ruling 600013615 on GOV.UK
A toy for dogs. Pack of 3 mini tennis balls designed to entertain dogs. The surface material is made of felt polyester with an inner of non-cellular rubber. With a hollow middle. Product diameter: 4.8cm.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg. 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect: a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg. 3(1)(b)). General Interpretative Rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 4016 - Other articles of vulcanised rubber other than hard rubber GIR 3B has been used as the non- cellular rubber is considered to be the essential character. GIR 6 has been used to classify the goods to subheading level 401699 - Other than elsewhere specified 8 digit code 40169997 - Other than rubber-to-metal bonded parts 10 digit code 4016999790 - Other than for technical uses, for use in civil aircraft or tyre moulding bladder Also classified in accordance with: Chapter 40 Note 1 Chapter 95 Note 5 Harmonised System Explanatory Notes to heading …
- UK 4016999790 Valid Sep 17, 2025 to Sep 16, 2028 · Ruling 600013616 on GOV.UK
A toy for dogs. Pack of 3 print squeaky balls designed to entertain dogs. Made of non-cellular rubber. With a hollow middle. Product diameter: 6.3cm.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg. 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect: a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg. 3(1)(b)). General Interpretative Rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 4016 - Other articles of vulcanised rubber other than hard rubber GIR 6 has been used to classify the goods to subheading level 401699 - Other than elsewhere specified 8 digit code 40169997 - Other than rubber-to-metal bonded parts 10 digit code 4016999790 - Other than for technical uses, for use in civil aircraft or tyre moulding bladder Also classified in accordance with: Chapter 40 Note 1 Chapter 95 Note 5 Harmonised System Explanatory Notes to heading 4016
- UK 4016999790 Valid Sep 17, 2025 to Sep 16, 2028 · Ruling 600013617 on GOV.UK
A spongy ball designed for dogs. Made of non-cellular rubber. Filled and not squeaky. Product diameter 6.3cm
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General Interpretative Rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 4016 - Other articles of vulcanised rubber other than hard rubber GIR 6 has been used to classify this product by the terms of heading 401699 - Other than elsewhere specified 8- digit code 40169997 - Other than rubber-to-metal bonded parts 10- digit code 4016999790 - Other than elsewhere specified Also classified in accordance with: Chapter 40 Note 1 Chapter 95 Note 5 Harmonised System Explanatory Notes to heading 4016
- UK 4016999790 Valid Nov 27, 2025 to Nov 26, 2028 · Ruling 600014005 on GOV.UK
A set of two play balls designed to entertain dogs. Made from non-cellular vulcanised rubber. Suitable for all types of dogs. Each ball measures approximately 6.0cm in diameter. Available in various colours. Packaged in a plastic bag for retail sale.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg. 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect: a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg. 3(1)(b)). General Interpretative Rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 4016 - Other articles of vulcanised rubber other than hard rubber GIR 5B has been used identify the type of packaging. GIR 6 has been used to classify the goods to subheading level 401699 - Other than elsewhere specified 8 digit code 40169997 - Other than rubber-to-metal bonded parts 10 digit code 4016999790 - Other than for technical uses, for use in civil aircraft or tyre moulding bladder Also classified in accordance with: Chapter 40 Note 1 Chapter 95 Note 5 Harmonised System Explanatory Notes to heading 4016
- UK 4016999790 Valid Jan 13, 2026 to Jan 12, 2029 · Ruling 600014619 on GOV.UK
A professional litter picker featuring a lightweight aluminium body, available in either 84 cm or 94 cm lengths. Designed with a soft-grip moulded handle made of polypropylene (PP) and thermoplastic rubber (TPR). The litter picker trigger is made from PP and the paw of TRP. The connector comprises nylon and ABS (Acrylonitrile Butadiene Styrene).
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General Interpretative Rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 4016 - Other articles of vulcanised rubber other than hard rubber GIR 3B has been used as the rubber paw is considered to be the essential character. GIR 6 has been used to classify this product by the terms of heading 401699 - Other than elsewhere specified 8- digit code 40169997 - Other than rubber-to-metal bonded parts 10- digit code 4016999790 - Other than elsewhere specified Also classified in accordance with: Chapter 40 Note 1 Harmonised System Explanatory Notes to heading 4016
- UK 4016999790 Valid Apr 24, 2026 to Apr 23, 2029 · Ruling 600014701 on GOV.UK
The product is a rubber bellow, a component for a mechanical seal assembly. The black moulded elastomer forms the secondary sealing interface between the mechanical seal assembly and the equipment being sealed. The bellow (without the metal spring) is manufactured from nitrile butadiene rubber (NBR) a vulcanised synthetic fluoroelastomer copolymer. Each NBR moulded part is manufactured by compression moulding and is custom designed for its specific mechanical seal application. The component is combined with other mechanical seal elements to meet precise specifications.
Justification
Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect: a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General Interpretative Rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 4016 - Other articles of vulcanised rubber other than hard rubber. GIR 6 - Has been used to classify the goods to subheading level 4016 99 - Other than of cellular rubber; other than elsewhere specified. 8 Digit Code 40169997 - Other than rubber-to-metal bonded parts. 10 Digit code 4016999790 - Other than for technical uses, for use in civil aircraft and tyre moulding bladder. Also classified in accordance with: Section notes 1a to section XVI. Chapter notes 1 and 4 to chapter 40. Harmonized system explanatory notes (HSEN’s) notes general and …
- UK 4016999790 Valid Apr 22, 2026 to Apr 21, 2029 · Ruling 600014702 on GOV.UK
The product is a rubber bellow, a component for a mechanical seal assembly. The black moulded elastomer forms the secondary sealing interface between the mechanical seal assembly and the equipment being sealed. The bellow (without the metal spring) is manufactured from tetrafluoroethylene propylene (TFE/P or FEPM), a vulcanised synthetic fluoroelastomer copolymer. Each TFE/P moulded part is manufactured by compression moulding and is custom designed for its specific mechanical seal application. The component is combined with other mechanical seal elements to meet precise specifications.
Justification
Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect: a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General Interpretative Rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 4016 - Other articles of vulcanised rubber other than hard rubber. GIR 6 - Has been used to classify the goods to subheading level 4016 99 - Other than of cellular rubber; other than elsewhere specified. 8 Digit Code 40169997 - Other than rubber-to-metal bonded parts. 10 Digit code 4016999790 - Other than for technical uses, for use in civil aircraft or tyre moulding bladder. Also classified in accordance with: Section notes 1a to section XVI. Chapter Notes 1 and 4 to chapter 40. Harmonized system explanatory notes (HSEN’s) notes general and note …
- UK 4016999790 Valid Apr 23, 2026 to Apr 22, 2029 · Ruling 600014703 on GOV.UK
The product is a rubber bellow, a component for a mechanical seal assembly. The black moulded unthreaded elastomer forms the secondary sealing interface between the mechanical seal assembly and the equipment being sealed. The bellow (without the metal spring) is manufactured from Ethylene Propylene Diene Monomer, (EPDM) a type of synthetic rubber. The EPDM part is manufactured via compression moulding and is custom-designed and intended solely for its specific mechanical seal application. The bellow is combined with other mechanical seal elements to meet precise specifications. Mechanical seals are utilised predominantly in industrial pumps for liquids, to prevent leakage between rotary and stationary elements within process equipment.
Justification
Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect: a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General Interpretative Rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 4016 - Other articles of vulcanised rubber other than hard rubber. GIR 6 - Has been used to classify the goods to subheading level 4016 99 - Other than of cellular rubber; other than elsewhere specified. 8 Digit Code 40169997 - Other than rubber-to-metal bonded parts. 10 Digit code 4016 9997 90 - Other than for technical uses, for use in civil aircraft and tyre moulding bladder. Also classified in accordance with: Section notes 1a to section XVI. Chapter Notes 1 and 4 to chapter 40. Harmonized system explanatory notes (HSEN’s) notes general and …
- UK 4016999790 Valid Feb 5, 2026 to Feb 4, 2029 · Ruling 600015087 on GOV.UK
A P shaped article, that is used to manufacture pylon seals within the aircraft industry. The part is unfinished and will be further processed to produce a finished seal. The item is made of vulcanised rubber.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg. 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect: a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg. 3(1)(b)). General Interpretative Rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 4016 - Other articles of vulcanised rubber other than hard rubber GIR 5B has been used identify the type of packaging. GIR 6 has been used to classify the goods to subheading level 401699 - Other than elsewhere specified 8 digit code 40169997 - Other than rubber-to-metal bonded parts 10 digit code 4016999790 - Other than for technical uses, for use in civil aircraft or tyre moulding bladder Also classified in accordance with: Chapter 40 Note 1 Harmonised System Explanatory Notes to heading 4016
- UK 4016999790 Valid Feb 5, 2026 to Feb 4, 2029 · Ruling 600015088 on GOV.UK
A blade shaped article, that is used to manufacture flap seals within the aircraft industry. The part is unfinished and will be further processed to produce a finished article. The item is made of vulcanised rubber.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg. 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect: a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg. 3(1)(b)). General Interpretative Rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 4016 - Other articles of vulcanised rubber other than hard rubber GIR 5B has been used identify the type of packaging. GIR 6 has been used to classify the goods to subheading level 401699 - Other than elsewhere specified 8 digit code 40169997 - Other than rubber-to-metal bonded parts 10 digit code 4016999790 - Other than for technical uses, for use in civil aircraft or tyre moulding bladder Also classified in accordance with: Chapter 40 Note 1 Harmonised System Explanatory Notes to heading 4016
Source: HM Revenue & Customs, Advance Tariff Rulings. Contains public sector information licensed under the Open Government Licence v3.0.
Restrictions and flags for 4016000000
- Russia sanctions: import ban Regulation (EU) No 833/2014, Annex XXI 4016
Art. 3i, goods generating significant revenue for Russia
Read the act on EUR-Lex - Russia sanctions: export ban Regulation (EU) No 833/2014, Annex XXIII 4016
Art. 3k, goods contributing to Russian industrial capacity
Read the act on EUR-Lex - Russia sanctions: export ban Regulation (EU) No 833/2014, Annex XXIII 4016
Art. 3k, goods contributing to Russian industrial capacity. only part of the code: Other articles of vulcanised rubber other than hard rubber, except for CN code 4016 93
Read the act on EUR-Lex
For orientation only. Check the act before you rely on a flag; thresholds, derogations and exceptions are not shown in full.
Import VAT in the EU
- Austria 20 %
- Belgium 21 %
- Bulgaria 20 %
- Croatia 25 %
- Cyprus 19 %
- Czechia 21 %
- Denmark 25 %
- Estonia 24 %
- Finland 25.5 %
- France 20 %
- Germany 19 %
- Greece 24 %
- Hungary 27 %
- Ireland 23 %
- Italy 22 %
- Latvia 21 %
- Lithuania 21 %
- Luxembourg 17 %
- Malta 18 %
- Netherlands 21 %
- Poland 23 %
- Portugal 23 %
- Romania 21 %
- Slovakia 23 %
- Slovenia 22 %
- Spain 21 %
- Sweden 25 %
Standard rate per member state, on the customs value, the duty and transport to the destination. Reduced rates often depend on the use or the buyer and apply only where the country provides them for these goods. Source: European Commission, Taxes in Europe Database, as of Nov 2, 2026.
Rules of origin
Preferential rules of origin for subheading 401600 depend on the trade agreement. The Commission publishes them in Access2Markets.
Rules of origin on Access2MarketsInformation
When importing or exporting "Other articles of vulcanised rubber other than hard rubber", it is crucial to have the correct HS code or TARIC code. The HS code 4016000000 80 serves as the standard code for this product, ensuring that the appropriate duties and taxes are applied when crossing international borders.
To ensure your business transactions run smoothly when importing or exporting "Other articles of vulcanised rubber other than hard rubber", consider the following points:
- Inform yourself about the specific import and export regulations in the countries involved. This includes possible restrictions, taxes, and duties applicable to "Other articles of vulcanised rubber other than hard rubber".
- Check if any additional licenses, permits, or certificates are required to import "Other articles of vulcanised rubber other than hard rubber" into the destination country or export it from the country of origin.
- Make sure your trading partners have valid identification numbers, such as EORI numbers (Economic Operators Registration and Identification) in the EU, to streamline trade and minimize delays.
- Ensure that all trade- and customs-related documents (such as commercial invoices, packing lists, certificates of origin, and insurance policies) are accurately completed and adhere to the respective national regulations.
- Keep an eye on the current exchange rates, as well as packaging, shipping, and insurance costs, to accurately calculate trade costs.
In summary, the HS code or TARIC code for "Other articles of vulcanised rubber other than hard rubber" is 4016000000 80. Make sure you accurately use this code in all your trade and customs documents to guarantee smooth and hassle-free transactions. With these tips, you'll be better prepared for the challenges of international trade and can successfully import and export "Other articles of vulcanised rubber other than hard rubber".
HS Code structure
1. Chapter
There are 21 different sections, which are divided into 96 chapters. Exceptional chapters include chapter 77, which is reserved for future use, chapters 98 and 99, which are limited at national level, and chapter 99, which is a specific code for temporary changes. In the example above, chapter 40 was selected for rubber and articles thereof
2. Heading
The heading determines the specific category within a certain chapter. In the example above, the 16 refers to Other articles of vulcanised rubber other than hard rubber.
HS Code tree structure
4000000000 80
Chapter RUBBER AND ARTICLES THEREOF
4016000000 80
Other articles of vulcanised rubber other than hard rubber
4016100000 80
- Of cellular rubber
4016100010 80
- - For technical uses, for use in civil aircraft
4016100090 80
- - Other
4016910000 10
- Other
4016910000 80
- - Floor coverings and mats
4016920000 80
- - Erasers
4016930000 80
- - Gaskets, washers and other seals
4016930010 80
- - - For technical uses, for use in civil aircraft
4016930030 80
- - - Rectangular ethylene-propylene-diene rubber gasket, with: -a length of 72 mm or more but not more than 825 mm, -a width of 18 mm or more but not more than 155 mm, -a peak temperature of 150°C or more but not more than 240°C, -a permissible material outflow at the place of the mold split of not more than 0,3 mm
4016930090 80
- - - Other
4016940000 80
- - Boat or dock fenders, whether or not inflatable
4016950000 80
- - Other inflatable articles
4016990000 80
- - Other
4016995200 10
- - - For motor vehicles of headings 8701 to 8705
4016995200 80
- - - - Rubber-to-metal bonded parts
4016995210 80
- - - - - Hanger of the exhaust muffler consisting of: -a steel bracket with at least one mounting hole and -silent block, for use in the manufacture of goods of Chapter 87
4016995290 80
- - - - - Other
4016995700 80
- - - - Other
4016995710 80
- - - - - Air intake hose for air supply to the combustion part of the engine comprising at least: - one flexible rubber hose, - one plastic hose, and - metal clips, - whether or not a resonator for use in the manufacture of goods of Chapter 87
4016995740 80
- - - - - Wiper rubber used in the manufacture of windshield wipers, -made of a mixture of natural rubber and chloroprene rubber -with a Shore hardness of 60A
4016995790 80
- - - - - Other
4016999100 10
- - - Other
4016999100 80
- - - - Rubber-to-metal bonded parts
4016999110 80
- - - - - For technical uses, for use in civil aircraft
4016999190 80
- - - - - Other
4016999700 80
- - - - Other
4016999710 80
- - - - - For technical uses, for use in civil aircraft
4016999730 80
- - - - - Tyre moulding bladder
4016999790 80
- - - - - Other