New Describe a product, get the CN code. Also as API and MCP for AI agents. Try it free
Jump to content

Tariff number 7304000000 80 - Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel

Email me changes

Import trade restrictions for 7304000000 80

This table contains information on trade restrictions for the import of goods into the EU and the EU into third countries. The table contains information on trade restrictions which are imposed due to customs unions, preferences, tariff quotas, customs unions, veterinary controls, third country duties and non-preferential tariff quotas.

Duties 40
1011
ERGA OMNES 1011
01-01-2005
0 %
Third country duty 103
AD
Andorra AD
01-01-2006
0 %
Customs union duty 106
2005
GSP-EBA (Special arrangement for the least-developed countries - Everything But Arms) 2005
01-01-2014
0 %
Tariff preference 142
2027
GSP+ (incentive arrangement for sustainable development and good governance) 2027
01-01-2014
0 %
Tariff preference 142
MD
Moldova, Republic of MD
01-01-2016
0 %
Tariff preference 142
GB
United Kingdom GB
01-01-2021
0 %
Tariff preference 142
GH
Ghana GH
01-01-2027
0 %
Tariff preference 142
SG
Singapore SG
01-01-2027
0 %
Tariff preference 142
CL
Chile CL
01-02-2025
0 %
Tariff preference 142
TN
Tunisia TN
01-03-1998
0 %
Tariff preference 142
MA
Morocco MA
01-03-2000
0 %
Tariff preference 142
LB
Lebanon LB
01-04-2006
0 %
Tariff preference 142
JO
Jordan JO
01-05-2002
0 %
Tariff preference 142
EG
Egypt EG
01-06-2004
0 %
Tariff preference 142
2012
EEA - European Economic Area 2012
01-07-2007
0 %
Tariff preference 142
KR
Korea, Republic of (South Korea) KR
01-07-2011
0 %
Tariff preference 142
MX
Mexico MX
01-07-2016
0 %
Tariff preference 142
KE
Kenya KE
01-07-2024
0 %
Tariff preference 142
US
United States US
01-07-2026
0 %
Tariff preference 142
2200
Central America 2200
01-08-2013
0 %
Tariff preference 142
CO
Colombia CO
01-08-2013
0 %
Tariff preference 142
DZ
Algeria DZ
01-09-2005
0 %
Tariff preference 142
1011
ERGA OMNES 1011
01-11-2026
2 EUR
Union handling fee 800
CI
Ivory Coast CI
02-12-2019
0 %
Tariff preference 142
2000
Preferential origin in accordance with the Agreement in the form of an Exchange of Letters between the European Union and the Kingdom of Morocco on the amendment of Protocols 1 and 4 to the Euro-Mediterranean Agreement establishing an association between the European Communities and their Member States, of the one part, and the Kingdom of Morocco, of the other part. 2000
03-10-2025
0 %
Tariff preference 142
CM
Cameroon CM
04-08-2014
0 %
Tariff preference 142
BY
Belarus BY
05-06-2022
Import prohibition 277
XL
Melilla XL
07-12-2003
0 %
Accession act0001/85
Tariff preference 142
XC
Ceuta XC
07-12-2003
0 %
Accession act0001/85
Tariff preference 142
PS
Occupied palestinian Territory PS
07-12-2003
0 %
Tariff preference 142
1035
SADC EPA 1035
10-10-2016
0 %
Tariff preference 142
1034
Eastern and Southern Africa States 1034
14-05-2012
0 %
Tariff preference 142
GH
Ghana GH
15-12-2016
– 31-12-2026
0 %
Tariff preference 142
IL
Israel IL
16-05-2023
0 %
Tariff preference 142
SB
Solomon Islands SB
17-05-2020
0 %
Tariff preference 142
PG
Papua New Guinea PG
20-12-2009
0 %
Tariff preference 142
SG
Singapore SG
21-11-2019
– 31-12-2026
0 %
Tariff preference 142
FJ
Fiji FJ
28-07-2014
0 %
Tariff preference 142
1033
CARIFORUM 1033
29-12-2008
0 %
Tariff preference 142
WS
Samoa WS
31-12-2018
0 %
Tariff preference 142
Controls and documents 6
1008
All third countries 1008
01-01-2026
– 31-12-2026
Document required
banned without it
Carbon Border Adjustment Mechanism - CBAM 775
KP
North Korea (Democratic People’s Republic of Korea) KP
01-07-2019
Document required
banned without it
Import control 707
RU
Russian Federation RU
19-12-2023
– 31-12-2027
Document required
banned without it
Import control 763
1008
All third countries 1008
19-12-2023
– 31-12-2027
Document required
banned without it
Import control 763
UA
Ukraine UA
24-06-2026
Document required
banned without it
Import control 762
UA
Ukraine UA
24-06-2026
Document required
banned without it
Import control 760

Explanation of trade restrictions

Erga Omnes means "for all".

Third countries are countries that are not part of the EU.

GSP means "Generalised System of Preferences".

GSP Plus means "Generalised System of Preferences Plus".

European Economic Area (EEA) means all EU member states and Iceland, Liechtenstein and Norway.

OCTs stands for "Overseas Countries and Territories". They are countries and territories that are not part of the EU. More information

CARIFORUM is a regional economic integration organisation comprising 15 Caribbean Community (CARICOM) countries and the Dominican Republic.

SADC EPA stands for "Southern African Development Community - Economic Partnership Agreement".

Duty means "customs duties".

Estimate the import cost for 7304000000

  • Customs value €1,000.00
  • Customs duty 0 % €0.00
  • Import VAT 19 % €190.00
  • Total €1,190.00

Documents and checks for China

An estimate only. The customs value is the price including transport and insurance to the EU border. Excise duties, other fees and producer-specific anti-dumping rates are not included. Preferential rates need valid proof of origin. Country groups and exclusions: TARIC, as of November 2026.

Export measures for 7304000000

What applies when these goods leave the EU: export controls, dual-use and other authorisations, bans per destination and the supplementary unit of the export declaration.

Measures 1
KP
North Korea (Democratic People’s Republic of Korea) KP
28-02-2018
Export prohibition 278
Controls and documents 5
KP
North Korea (Democratic People’s Republic of Korea) KP
01-07-2019
Document required
banned without it
Restriction on export 476
BY
Belarus BY
25-02-2025
Document required
banned without it
Export control 766
IR
Iran, Islamic Republic of IR
30-09-2025
Document required
banned without it
Export control 768
UA
Ukraine UA
25-02-2025
Document required
banned without it
Export control 709
UA
Ukraine UA
25-08-2022
Document required
banned without it
Export control 767

History

Duty rates and measures for this code over time (yearly snapshots).

Preferential rules of origin for 7304000000

What the goods must meet to count as originating in a partner country and get the preferential duty, per agreement.

  • Autonomous Trade Preferences (Western Balkans) · Kosovo

    EU-Chile Association Agreement · Chile

    EU-Colombia/Peru/Ecuador Trade Agreement · Colombia, Ecuador, Peru

    EU-Algeria Association Agreement · Algeria

    EEA/EFTA agreements (Switzerland, Norway, Liechtenstein, Faroe Islands) · Faroe Islands, Liechtenstein, Norway, Switzerland

    EU-Egypt Association Agreement · Egypt

    EU-Georgia DCFTA · Georgia

    EU-Iceland FTA · Iceland

    EU-Jordan Association Agreement · Jordan

    EU-Korea FTA · South Korea

    EU-Central America Association Agreement

    EU-Lebanon Association Agreement · Lebanon

    EU-Morocco Association Agreement · Morocco

    EU-Moldova DCFTA · Moldova

    Pan-Euro-Mediterranean (PEM) Convention · Albania, Andorra, Bosnia & Herzegovina, Egypt, Faroe Islands, Iceland, Kosovo, Liechtenstein, Montenegro, North Macedonia, Norway, Palestine, Switzerland, Türkiye

    EU-Singapore FTA · Singapore

    EU-Tunisia Association Agreement · Tunisia

    EU-Ukraine DCFTA · Ukraine

    Tubes, pipes and hollow profiles, of iron (other than cast iron) or steel / or: Manufacture from materials of heading 7206, 7207, 7218 or 7224

  • EPA CARIFORUM

    EU Market Access Regulation (EPA) · Cameroon, Côte d’Ivoire, Ghana, Kenya

    EPA Pacific · Fiji, Papua New Guinea, Samoa, Solomon Islands

    EU-Israel Association Agreement · Israel

    EU-Mexico Global Agreement · Mexico

    EU-Palestine Interim Association Agreement · Palestine

    EPA SADC · South Africa

    Tubes, pipes and hollow profiles, of iron (other than cast iron) or steel / or: Manufacture from materials of heading No 7206, 7207, 7218 or 7224

  • Generalised Scheme of Preferences (GSP, GSP+, EBA) · Armenia, India, Kenya, Pakistan, Samoa, Solomon Islands, Syria, Vietnam

    EU-Jordan Association Agreement (relaxed rules, 2016) · Jordan

    Tubes, pipes and hollow profiles, of iron (other than cast iron) or steel / or: Manufacture from materials of heading 7206, 7207, 7208, 7209, 7210, 7211, 7212, 7218, 7219, 7220 or 7224

  • EPA Eastern and Southern Africa

    Tube or pipe fittings of stainless steel (ISO No X5CrNiMo 1712), consisting of several parts / or: Turning, drilling, reaming, threading, deburring and sandblasting of forged blanks the value of which does not exceed 35 % of the ex-works price of the product

  • EU-Japan EPA · Japan

    CC except from headings 72.13 to 72.17, 72.21 to 72.23 and 72.25 to 72.29. CTH except from forged blanks of heading 72.07; however, non-originating forged blanks of heading 72.07 may be used provided that their value does not exceed 50 % of the EXW or 45 % of the FOB of the product. CTH

  • EU-Viet Nam FTA · Vietnam

    tubes, pipes and hollow profiles, of iron (other than cast iron) or steel; other tubes and pipes (for example, welded, riveted or similarly closed), having circular cross-sections, the external diameter of which exceeds 406,4 mm, of iron or steel; / or: Manufacture from materials of heading 7206, 7207, 7208, 7209, 7210, 7212, 7218, 7219, 7220 or 7224.

Source: European Commission, Access2Markets (CC BY 4.0, shortened). The text of the agreement prevails. Access2Markets

Legal and explanatory notes for 7304000000

7304 CN Explanatory Notes: Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel

Articles of this heading, of a length which does not exceed twice the greatest external dimension of the cross-section, are not considered as tubes or pipes. They are considered to be either tube or pipe fittings (heading 7307) or washers (heading 7318). This heading covers also articles which are threaded regardless of the ratio of the threaded part as compared to the overall length of the article (see also the HS Explanatory Note to Chapter 73, General, (1)).

7304 31 20 CN Explanatory Notes: Precision tubes

The products of this subheading are characterised by their smooth, shiny or polished internal or external surfaces and by the fact that their tolerances are stricter than those for hot-finished tubes. Tubes meeting the requirements of ISO Standard 3304 and the related national standards are used for applications such as hydraulic or pneumatic circuits, shock absorbers, hydraulic or pneumatic screws, and generally for the fabrication of parts for motor vehicles, motors or machines. However, tubes meeting the provisions of ISO Standards 6759 and 9329 and the relevant national standards are used as conduits in pressure vessels: boilers, superheaters, heat-exchangers and feedwater heaters for power stations, where the tolerances imposed on precision tubing are required.

7304 39 10 CN Explanatory Notes: Unworked, straight and of uniform wall-thickness, for use solely in the manufacture of tubes and pipes with other cross-sections and wall-thicknesses

This subheading includes seamless steel tubes, usually obtained by piercing and hot-rolling or by piercing and hot-drawing; they are usually called ‘blanks’. They are intended to be transformed into tubes of other shapes and wall-thickness with more reduced dimensional tolerances. They are presented with the ends roughly cut off and deburred, but are otherwise unfinished. Their exterior and interior surfaces are rough and not descaled. They are not oiled, zinc-coated or painted.

7304 39 52 CN Explanatory Notes: and 7304 39 58

Threaded or threadable tubes (gas pipe) These tubes are obtained by hot-rolling and calibration. They have an external diameter of 13,5 to 165,1 mm, and are delivered with smooth ends or threaded ends with sleeves. They have either an unfinished surface or a surface with a layer of zinc or other protective product, for example, plastic or bitumen. Hot-finishing gives them mechanical properties which enable them to be cut to the length at which they are to be used, bent and where necessary threaded in situ. They are used mainly for the distribution of steam, water or gas in buildings. They meet the requirements of ISO Standard 65 and the relevant national standards.

7304 39 58 CN Explanatory Notes: and 7304 39 58

Threaded or threadable tubes (gas pipe) These tubes are obtained by hot-rolling and calibration. They have an external diameter of 13,5 to 165,1 mm, and are delivered with smooth ends or threaded ends with sleeves. They have either an unfinished surface or a surface with a layer of zinc or other protective product, for example, plastic or bitumen. Hot-finishing gives them mechanical properties which enable them to be cut to the length at which they are to be used, bent and where necessary threaded in situ. They are used mainly for the distribution of steam, water or gas in buildings. They meet the requirements of ISO Standard 65 and the relevant national standards.

7304 49 10 CN Explanatory Notes: Unworked, straight and of uniform wall-thickness, for use solely in the manufacture of tubes and pipes with other cross-sections and wall-thicknesses

See the explanatory note to subheading 7304 39 10.

7304 51 81 CN Explanatory Notes: Precision tubes

See the explanatory note to subheading 7304 31 20.

7304 59 10 CN Explanatory Notes: Unworked, straight and of uniform wall-thickness, for use solely in the manufacture of tubes and pipes with other cross-sections and wall-thicknesses

See the explanatory note to subheading 7304 39 10.

Notes to chapter 73

Notes 1. In this chapter, the expression ‘cast iron’ applies to products obtained by casting in which iron predominates by weight over each of the other elements and which do not comply with the chemical composition of steel as defined in note 1(d) to Chapter 72. 2. In this chapter, the word ‘wire’ means hot- or cold-formed products of any cross-sectional shape, of which no cross-sectional dimension exceeds 16 mm.

Sources: Combined Nomenclature 2026, Annex I to Regulation (EEC) No 2658/87 (CELEX 32025R1926), and the Explanatory Notes to the Combined Nomenclature (CELEX 02019XC0329(02)-20260213). The section and chapter notes are legally binding; the explanatory notes are guidance. EUR-Lex

UK advance tariff rulings for 7304000000

Rulings of HM Revenue & Customs for goods with UK commodity codes that start like this EU code. The UK tariff differs from the EU tariff, so these rulings are guidance for the EU.

  • UK 7304193020 Valid Dec 5, 2023 to Dec 4, 2026 · Ruling 600009289 on GOV.UK

    The product is a seamless carbon manganese steel water injection linepipe with an outside diameter of 323.9 mm and a carbon equivalent value not exceeding 0.86 according to the International Institute of Welding (IWW) formula and chemical analysis.

    Justification

    Classification has been determined in accordance with the following : For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General interpretive rules (GIR)s : Gir 1 has been used to classify this product by the terms of heading 7304, tubes, pipes, and hollow profiles, seamless, of iron (other than cast iron) or steel Gir 6 has been used to classify the goods to subheading level 730419 - other than of stainless steel Eight digit code 73041930 - of an external diameter exceeding 168,3 mm but not exceeding 406,4 mm Ten digit code - 7304193020 - of circular cross-section and with a carbon equivalent value (cev) not exceeding 0,86 according to the international institute of welding (iiw) formula and chemical analysis Also classified in accordance with: Harmonised System …

  • UK 7304193020 Valid Dec 5, 2023 to Dec 4, 2026 · Ruling 600009291 on GOV.UK

    Seamless carbon manganese steel gas export pipeline with an outside diameter of 273.1 mm and a carbon equivalent value not exceeding 0.86 according to the International Institute of Welding (IWW) formula and chemical analysis.

    Justification

    Classification has been determined in accordance with the following : For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General interpretive rules (GIR)s : Gir 1 has been used to classify this product by the terms of heading 7304, tubes, pipes, and hollow profiles, seamless, of iron (other than cast iron) or steel Gir 6 has been used to classify the goods to subheading level 730419 - other than of stainless steel Eight digit code 73041930 - of an external diameter exceeding 168,3 mm but not exceeding 406,4 mm Ten digit code - 7304193020 - of circular cross-section and with a carbon equivalent value (cev) not exceeding 0,86 according to the international institute of welding (iiw) formula and chemical analysis Also classified in accordance with: Harmonised System …

  • UK 7304240080 Valid Oct 2, 2024 to Oct 1, 2027 · Ruling 600011452 on GOV.UK

    Casing Tube Cold worked and cold hardened (Cold-Drawn). Made of stainless steel. The outer tubes are called casing. Casing lines the wellbore and thus protects the layers of soil and above all the groundwater from being contaminated by the drilling mud and/or frac fluids. It also stabilizes the wellbore, so casing must be able to withstand especially high loads. The drilling and casing alternate – the drill string is taken out at specific intervals and the wellbore is lined with casing and cemented. Then drilling continues. The tubes have smooth surfaces and need to be threaded before being used as casing tubes.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 has been used to classify this product by the terms of heading 7304: Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel GIR 2a has been used as the goods are unfinished GIR 6 has been used to classify the goods to subheading level 730424: Casing, tubing and drill pipe, of a kind used in drilling for oil or gas; Other, of stainless steel 10 Digit code 7304240080: Other than of circular cross-section, of an external diameter not exceeding 406.4 mm and with a carbon equivalent value (cev) not exceeding 0.86 according to the international institute of welding (iiw) formula and chemical analysis Also classified in accordance …

+ 6 more
  • UK 7304598230 Valid Oct 1, 2024 to Sep 30, 2027 · Ruling 600011428 on GOV.UK

    This product is a tube made of alloy steel, the tube is hot rolled and is used for raw material for manufacturing oilfield accessories.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3(1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect - a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 7304 - Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel GIR 6 has been used to classify the goods to subheading level 730459 - Other, of a circular cross-section, of other alloy steel; Other than cold-drawn or cold-rolled (cold-reduced) Eight digit code 73045982 - Other; Of an external diameter not exceeding 168.3 mm Ten digit code 7304598230 - With a carbon equivalent value (cev) not exceeding 0.86 according to the international institute of welding (iiw) formula and chemical analysis Also classified in accordance …

  • UK 7304598230 Valid Dec 12, 2024 to Dec 11, 2027 · Ruling 600011565 on GOV.UK

    Alloy Steel Tube This product is a tube made of alloy steel, the tube is hot rolled and is used for raw material for manufacturing oilfield accessories.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3(1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect - a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIRs): GIR 1 has been used to classify this product by the terms of heading 7304 - Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel GIR 6 has been used to classify the goods to subheading level 730459 - Other, of a circular cross-section, of other alloy steel; Other than cold-drawn or cold-rolled (cold-reduced) 8 digit code 73045982 - Other; Of an external diameter not exceeding 168.3 mm 10 digit code 7304598230 - With a carbon equivalent value (cev) not exceeding 0.86 according to the international institute of welding (iiw) formula and chemical analysis Also classified in accordance …

  • UK 7304598230 Valid Dec 12, 2024 to Dec 11, 2027 · Ruling 600011578 on GOV.UK

    Alloy Steel Tube This product is a tube made of alloy steel, the tube is hot rolled and is used for raw material for manufacturing oilfield accessories.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3(1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect - a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIRs): GIR 1 has been used to classify this product by the terms of heading 7304 - Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel GIR 6 has been used to classify the goods to subheading level 730459 - Other, of a circular cross-section, of other alloy steel; Other than cold-drawn or cold-rolled (cold-reduced) 8 digit code 73045982 - Other; Of an external diameter not exceeding 168.3 mm 10 digit code 7304598230 - With a carbon equivalent value (cev) not exceeding 0.86 according to the international institute of welding (iiw) formula and chemical analysis Also classified in accordance …

  • UK 7304598320 Valid Sep 27, 2024 to Sep 26, 2027 · Ruling 600011450 on GOV.UK

    Steel Pipes/Tubes Hot finished seamless. Plain end square cut, deburred. Hot rolled, other alloy steel. Raw material for manufacturing oilfield accessories.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 has been used to classify this product by the terms of heading 7304: Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel GIR 6 has been used to classify the goods to subheading level 730459: Other, of circular cross-section, of other alloy steel; Other than Cold-drawn or cold-rolled (cold-reduced) 8 Digit code 73045983: Other than straight and of uniform wall thickness, of alloy steel containing by weight not less than 0.9% but not more than 1.15% of carbon, not less than 0.5% but not more than 2% of chromium and, if present, not more than 0.5% of molybdenum; Of an external diameter exceeding 168.3 mm but not exceeding 406.4 …

  • UK 7304598320 Valid Dec 11, 2024 to Dec 10, 2027 · Ruling 600011583 on GOV.UK

    Steel Pipes/Tubes Hot finished seamless. Plain end square cut, deburred. Hot rolled, other alloy steel. Raw material for manufacturing oilfield accessories.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 has been used to classify this product by the terms of heading 7304: Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel GIR 6 has been used to classify the goods to subheading level 730459: Other, of circular cross-section, of other alloy steel; Other than Cold-drawn or cold-rolled (cold-reduced) 8 Digit code 73045983: Other than straight and of uniform wall thickness, of alloy steel containing by weight not less than 0.9% but not more than 1.15% of carbon, not less than 0.5% but not more than 2% of chromium and, if present, not more than 0.5% of molybdenum; Of an external diameter exceeding 168.3 mm but not exceeding 406.4 …

  • UK 7304900099 Valid Apr 18, 2024 to Apr 17, 2027 · Ruling 600010273 on GOV.UK

    A Steel Tube Metal Insert measuring 38 x 38mm and 0.8mm thick. The product is used as a metal insert for composite louvre cladding profile to help improve structural integrity. The tubes are packed in 2's in pallets.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading 7304 - Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel GIR 5 (b) - has been used to identify the type of packaging. Packed in 2's in pallets GIR 6 has been used to classify this product to subheading level 730490 - Other than elsewhere specified 10 digit code 7304900099 - Other than with attached fittings, suitable for conducting gases or liquids, for use in civil aircraft; Other than tubes and pipes, of stainless steel Also classified in accordance with: Harmonized System Explanatory Notes (HSENs) to …

Source: HM Revenue & Customs, Advance Tariff Rulings. Contains public sector information licensed under the Open Government Licence v3.0.

Restrictions and flags for 7304000000

  • CBAM: carbon border adjustment Regulation (EU) 2023/956, Annex I 7304

    Sector: iron and steel

    Read the act on EUR-Lex
  • Russia sanctions: import ban Regulation (EU) No 833/2014, Annex XVII 7304

    Art. 3g, iron and steel products

    Read the act on EUR-Lex
  • Russia sanctions: export ban Regulation (EU) No 833/2014, Annex XXIII 7304

    Art. 3k, goods contributing to Russian industrial capacity

    Read the act on EUR-Lex

For orientation only. Check the act before you rely on a flag; thresholds, derogations and exceptions are not shown in full.

Import VAT in the EU

  • Austria 20 %
  • Belgium 21 %
  • Bulgaria 20 %
  • Croatia 25 %
  • Cyprus 19 %
  • Czechia 21 %
  • Denmark 25 %
  • Estonia 24 %
  • Finland 25.5 %
  • France 20 %
  • Germany 19 %
  • Greece 24 %
  • Hungary 27 %
  • Ireland 23 %
  • Italy 22 %
  • Latvia 21 %
  • Lithuania 21 %
  • Luxembourg 17 %
  • Malta 18 %
  • Netherlands 21 %
  • Poland 23 %
  • Portugal 23 %
  • Romania 21 %
  • Slovakia 23 %
  • Slovenia 22 %
  • Spain 21 %
  • Sweden 25 %

Standard rate per member state, on the customs value, the duty and transport to the destination. Reduced rates often depend on the use or the buyer and apply only where the country provides them for these goods. Source: European Commission, Taxes in Europe Database, as of Nov 2, 2026.

Rules of origin

Preferential rules of origin for subheading 730400 depend on the trade agreement. The Commission publishes them in Access2Markets.

Rules of origin on Access2Markets

Information

When importing or exporting "Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel", it is crucial to have the correct HS code or TARIC code. The HS code 7304000000 80 serves as the standard code for this product, ensuring that the appropriate duties and taxes are applied when crossing international borders.

To ensure your business transactions run smoothly when importing or exporting "Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel", consider the following points:

  1. Inform yourself about the specific import and export regulations in the countries involved. This includes possible restrictions, taxes, and duties applicable to "Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel".
  2. Check if any additional licenses, permits, or certificates are required to import "Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel" into the destination country or export it from the country of origin.
  3. Make sure your trading partners have valid identification numbers, such as EORI numbers (Economic Operators Registration and Identification) in the EU, to streamline trade and minimize delays.
  4. Ensure that all trade- and customs-related documents (such as commercial invoices, packing lists, certificates of origin, and insurance policies) are accurately completed and adhere to the respective national regulations.
  5. Keep an eye on the current exchange rates, as well as packaging, shipping, and insurance costs, to accurately calculate trade costs.

In summary, the HS code or TARIC code for "Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel" is 7304000000 80. Make sure you accurately use this code in all your trade and customs documents to guarantee smooth and hassle-free transactions. With these tips, you'll be better prepared for the challenges of international trade and can successfully import and export "Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel".

HS Code structure

73
Chapter
04
Heading
00
Subheading
00
CN Subheading
00
TARIC Subheading
80
Additional TARIC codes

1. Chapter

There are 21 different sections, which are divided into 96 chapters. Exceptional chapters include chapter 77, which is reserved for future use, chapters 98 and 99, which are limited at national level, and chapter 99, which is a specific code for temporary changes. In the example above, chapter 73 was selected for articles of iron or steel

2. Heading

The heading determines the specific category within a certain chapter. In the example above, the 04 refers to Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel.

HS Code tree structure

7300000000 80

Chapter ARTICLES OF IRON OR STEEL

7304000000 80

Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel

7304110000 10

- Line pipe of a kind used for oil or gas pipelines

7304110000 80

- - Of stainless steel

7304110010 80

- - - Of circular cross-section, of an external diameter not exceeding 406,4 mm and with a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis

7304110090 80

- - - Other

7304190000 80

- - Other

7304191000 80

- - - Of an external diameter not exceeding 168,3 mm

7304191020 80

- - - - Of circular cross-section and with a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis

7304191080 80

- - - - Other

7304193000 80

- - - Of an external diameter exceeding 168,3 mm but not exceeding 406,4 mm

7304193020 80

- - - - Of circular cross-section and with a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis

7304193080 80

- - - - Other

7304199000 80

- - - Of an external diameter exceeding 406,4 mm

7304220000 10

- Casing, tubing and drill pipe, of a kind used in drilling for oil or gas

7304220000 80

- - Drill pipe of stainless steel

7304220020 80

- - - Of circular cross-section, of an external diameter not exceeding 406,4 mm and with a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis

7304220080 80

- - - Other

7304230000 80

- - Other drill pipe

7304230020 80

- - - Of circular cross-section, of an external diameter not exceeding 406,4 mm and with a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis

7304230080 80

- - - Other

7304240000 80

- - Other, of stainless steel

7304240020 80

- - - Of circular cross-section, of an external diameter not exceeding 406,4 mm and with a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis

7304240080 80

- - - Other

7304290000 80

- - Other

7304291000 80

- - - Of an external diameter not exceeding 168,3 mm

7304291020 80

- - - - Of circular cross-section and with a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis

7304291080 80

- - - - Other

7304293000 80

- - - Of an external diameter exceeding 168,3 mm but not exceeding 406,4 mm

7304293020 80

- - - - Of circular cross-section and with a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis

7304293080 80

- - - - Other

7304299000 80

- - - Of an external diameter exceeding 406,4 mm

7304299010 80

- - - - Casings

7304299090 80

- - - - Other

7304310000 10

- Other, of circular cross-section, of iron or non-alloy steel

7304310000 80

- - Cold-drawn or cold-rolled (cold-reduced)

7304312000 80

- - - Precision tubes

7304312030 80

- - - - Of an external diameter not exceeding 406,4 mm and with a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis

7304312095 80

- - - - Other

7304318000 80

- - - Other

7304318030 80

- - - - Of an external diameter not exceeding 406,4 mm and with a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis

7304318099 80

- - - - Other

7304390000 80

- - Other

7304395000 80

- - - Threaded or threadable tubes (gas pipe)

7304395030 80

- - - - Of an external diameter not exceeding 406,4 mm and with a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis

7304395099 80

- - - - Other

7304398200 10

- - - Other, of an external diameter

7304398200 80

- - - - Not exceeding 168,3 mm

7304398230 80

- - - - - With a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis

7304398299 80

- - - - - Other

7304398300 80

- - - - Exceeding 168,3 mm but not exceeding 406,4 mm

7304398320 80

- - - - - With a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis

7304398380 80

- - - - - Other

7304398800 80

- - - - Exceeding 406,4 mm

7304410000 10

- Other, of circular cross-section, of stainless steel

7304410000 80

- - Cold-drawn or cold-rolled (cold-reduced)

7304410010 80

- - - With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft

7304410090 80

- - - Other

7304490000 80

- - Other

7304498300 80

- - - Of an external diameter not exceeding 168,3 mm

7304498310 80

- - - - With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft

7304498390 80

- - - - Other

7304498500 80

- - - Of an external diameter exceeding 168,3 mm but not exceeding 406,4 mm

7304498510 80

- - - - With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft

7304498590 80

- - - - Other

7304498900 80

- - - Of an external diameter exceeding 406,4 mm

7304498910 80

- - - - With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft

7304498990 80

- - - - Other

7304510000 10

- Other, of circular cross-section, of other alloy steel

7304510000 80

- - Cold-drawn or cold-rolled (cold-reduced)

7304511000 80

- - - Straight and of uniform wall thickness, of alloy steel containing by weight not less than 0,9 % but not more than 1,15 % of carbon, not less than 0,5 % but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum

7304518100 10

- - - Other

7304518100 80

- - - - Precision tubes

7304518900 80

- - - - Other

7304518930 80

- - - - - Of an external diameter not exceeding 406,4 mm and with a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis

7304518999 80

- - - - - Other

7304590000 80

- - Other

7304593000 80

- - - Straight and of uniform wall thickness, of alloy steel containing by weight not less than 0,9 % but not more than 1,15 % of carbon, not less than 0,5 % but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum

7304598200 10

- - - Other

7304598200 80

- - - - Of an external diameter not exceeding 168,3 mm

7304598230 80

- - - - - With a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis

7304598299 80

- - - - - Other

7304598300 80

- - - - Of an external diameter exceeding 168,3 mm but not exceeding 406,4 mm

7304598320 80

- - - - - With a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis

7304598380 80

- - - - - Other

7304598900 80

- - - - Of an external diameter exceeding 406,4 mm

7304900000 80

- Other

7304900010 80

- - With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft

7304900091 10

- - Other

7304900091 80

- - - Tubes and pipes, of stainless steel

7304900099 80

- - - Other