Import trade restrictions for 7306000000 80
This table contains information on trade restrictions for the import of goods into the EU and the EU into third countries. The table contains information on trade restrictions which are imposed due to customs unions, preferences, tariff quotas, customs unions, veterinary controls, third country duties and non-preferential tariff quotas.
| Origin country | Start | Duty / Tax | Legal base Measure type | |
|---|---|---|---|---|
1011 | ERGA OMNES 1011 | 01-01-2005 | 0 % | Third country duty 103 |
1011 | ERGA OMNES 1011 | 01-11-2026 | 3 EUR | Low-value consignment customs duty 107 |
| Andorra AD | 01-01-2006 | 0 % | Customs union duty 106 | |
2005 | GSP-EBA (Special arrangement for the least-developed countries - Everything But Arms) 2005 | 01-01-2014 | 0 % | Tariff preference 142 |
2027 | GSP+ (incentive arrangement for sustainable development and good governance) 2027 | 01-01-2014 | 0 % | Tariff preference 142 |
| Moldova, Republic of MD | 01-01-2016 | 0 % | Tariff preference 142 | |
| United Kingdom GB | 01-01-2021 | 0 % | Tariff preference 142 | |
| Ghana GH | 01-01-2027 | 0 % | Tariff preference 142 | |
| Singapore SG | 01-01-2027 | 0 % | Tariff preference 142 | |
| Chile CL | 01-02-2025 | 0 % | Tariff preference 142 | |
| Tunisia TN | 01-03-1998 | 0 % | Tariff preference 142 | |
| Morocco MA | 01-03-2000 | 0 % | Tariff preference 142 | |
| Lebanon LB | 01-04-2006 | 0 % | Tariff preference 142 | |
| Jordan JO | 01-05-2002 | 0 % | Tariff preference 142 | |
| Egypt EG | 01-06-2004 | 0 % | Tariff preference 142 | |
2012 | EEA - European Economic Area 2012 | 01-07-2007 | 0 % | Tariff preference 142 |
| Korea, Republic of (South Korea) KR | 01-07-2011 | 0 % | Tariff preference 142 | |
| Mexico MX | 01-07-2016 | 0 % | Tariff preference 142 | |
| Kenya KE | 01-07-2024 | 0 % | Tariff preference 142 | |
| United States US | 01-07-2026 | 0 % | Tariff preference 142 | |
2200 | Central America 2200 | 01-08-2013 | 0 % | Tariff preference 142 |
| Colombia CO | 01-08-2013 | 0 % | Tariff preference 142 | |
| Algeria DZ | 01-09-2005 | 0 % | Tariff preference 142 | |
1011 | ERGA OMNES 1011 | 01-11-2026 | 2 EUR | Union handling fee 800 |
| Ivory Coast CI | 02-12-2019 | 0 % | Tariff preference 142 | |
2000 | Preferential origin in accordance with the Agreement in the form of an Exchange of Letters between the European Union and the Kingdom of Morocco on the amendment of Protocols 1 and 4 to the Euro-Mediterranean Agreement establishing an association between the European Communities and their Member States, of the one part, and the Kingdom of Morocco, of the other part. 2000 | 03-10-2025 | 0 % | Tariff preference 142 |
| Cameroon CM | 04-08-2014 | 0 % | Tariff preference 142 | |
| Belarus BY | 05-06-2022 | Import prohibition 277 | ||
XL | Melilla XL | 07-12-2003 | 0 % | Accession act0001/85 Tariff preference 142 |
XC | Ceuta XC | 07-12-2003 | 0 % | Accession act0001/85 Tariff preference 142 |
| Occupied palestinian Territory PS | 07-12-2003 | 0 % | Tariff preference 142 | |
1035 | SADC EPA 1035 | 10-10-2016 | 0 % | Tariff preference 142 |
1034 | Eastern and Southern Africa States 1034 | 14-05-2012 | 0 % | Tariff preference 142 |
| Ghana GH | 15-12-2016 – 31-12-2026 | 0 % | Tariff preference 142 | |
| Israel IL | 16-05-2023 | 0 % | Tariff preference 142 | |
| Solomon Islands SB | 17-05-2020 | 0 % | Tariff preference 142 | |
| Papua New Guinea PG | 20-12-2009 | 0 % | Tariff preference 142 | |
| Singapore SG | 21-11-2019 – 31-12-2026 | 0 % | Tariff preference 142 | |
| Fiji FJ | 28-07-2014 | 0 % | Tariff preference 142 | |
1033 | CARIFORUM 1033 | 29-12-2008 | 0 % | Tariff preference 142 |
| Samoa WS | 31-12-2018 | 0 % | Tariff preference 142 |
| Origin country | Start | Duty / Tax | Legal base Measure type | |
|---|---|---|---|---|
1008 | All third countries 1008 | 01-01-2026 – 31-12-2026 | Document required banned without it | Carbon Border Adjustment Mechanism - CBAM 775 |
| North Korea (Democratic People’s Republic of Korea) KP | 01-07-2019 | Document required banned without it | Import control 707 | |
| Russian Federation RU | 19-12-2023 – 31-12-2027 | Document required banned without it | Import control 763 | |
1008 | All third countries 1008 | 19-12-2023 – 31-12-2027 | Document required banned without it | Import control 763 |
| Ukraine UA | 24-06-2026 | Document required banned without it | Import control 762 | |
| Ukraine UA | 24-06-2026 | Document required banned without it | Import control 760 |
Explanation of trade restrictions
Erga Omnes means "for all".
Third countries are countries that are not part of the EU.
GSP means "Generalised System of Preferences".
GSP Plus means "Generalised System of Preferences Plus".
European Economic Area (EEA) means all EU member states and Iceland, Liechtenstein and Norway.
OCTs stands for "Overseas Countries and Territories". They are countries and territories that are not part of the EU. More information
CARIFORUM is a regional economic integration organisation comprising 15 Caribbean Community (CARICOM) countries and the Dominican Republic.
SADC EPA stands for "Southern African Development Community - Economic Partnership Agreement".
Duty means "customs duties".
Estimate the import cost for 7306000000
An estimate only. The customs value is the price including transport and insurance to the EU border. Excise duties, other fees and producer-specific anti-dumping rates are not included. Preferential rates need valid proof of origin. Country groups and exclusions: TARIC, as of November 2026.
Export measures for 7306000000
What applies when these goods leave the EU: export controls, dual-use and other authorisations, bans per destination and the supplementary unit of the export declaration.
| Destination | Start | Duty / Tax | Legal base Measure type | |
|---|---|---|---|---|
| North Korea (Democratic People’s Republic of Korea) KP | 28-02-2018 | Export prohibition 278 |
| Destination | Start | Duty / Tax | Legal base Measure type | |
|---|---|---|---|---|
| North Korea (Democratic People’s Republic of Korea) KP | 01-07-2019 | Document required banned without it | Restriction on export 476 | |
| Belarus BY | 25-02-2025 | Document required banned without it | Export control 766 | |
| Iran, Islamic Republic of IR | 30-09-2025 | Document required banned without it | Export control 768 | |
| Ukraine UA | 25-02-2025 | Document required banned without it | Export control 709 | |
| Ukraine UA | 25-08-2022 | Document required banned without it | Export control 767 |
History
Duty rates and measures for this code over time (yearly snapshots).
Preferential rules of origin for 7306000000
What the goods must meet to count as originating in a partner country and get the preferential duty, per agreement.
Autonomous Trade Preferences (Western Balkans) · Kosovo
EU-Chile Association Agreement · Chile
EU-Colombia/Peru/Ecuador Trade Agreement · Colombia, Ecuador, Peru
EU-Algeria Association Agreement · Algeria
EEA/EFTA agreements (Switzerland, Norway, Liechtenstein, Faroe Islands) · Faroe Islands, Liechtenstein, Norway, Switzerland
EU-Egypt Association Agreement · Egypt
EU-Georgia DCFTA · Georgia
EU-Iceland FTA · Iceland
EU-Jordan Association Agreement · Jordan
EU-Korea FTA · South Korea
EU-Central America Association Agreement
EU-Lebanon Association Agreement · Lebanon
EU-Morocco Association Agreement · Morocco
EU-Moldova DCFTA · Moldova
Pan-Euro-Mediterranean (PEM) Convention · Albania, Andorra, Bosnia & Herzegovina, Egypt, Faroe Islands, Iceland, Kosovo, Liechtenstein, Montenegro, North Macedonia, Norway, Palestine, Switzerland, Türkiye
EU-Singapore FTA · Singapore
EU-Tunisia Association Agreement · Tunisia
EU-Ukraine DCFTA · Ukraine
Tubes, pipes and hollow profiles, of iron (other than cast iron) or steel / or: Manufacture from materials of heading 7206, 7207, 7218 or 7224
EPA CARIFORUM
EU Market Access Regulation (EPA) · Cameroon, Côte d’Ivoire, Ghana, Kenya
EPA Pacific · Fiji, Papua New Guinea, Samoa, Solomon Islands
EU-Israel Association Agreement · Israel
EU-Mexico Global Agreement · Mexico
EU-Palestine Interim Association Agreement · Palestine
EPA SADC · South Africa
Tubes, pipes and hollow profiles, of iron (other than cast iron) or steel / or: Manufacture from materials of heading No 7206, 7207, 7218 or 7224
Generalised Scheme of Preferences (GSP, GSP+, EBA) · Armenia, India, Kenya, Pakistan, Samoa, Solomon Islands, Syria, Vietnam
EU-Jordan Association Agreement (relaxed rules, 2016) · Jordan
Tubes, pipes and hollow profiles, of iron (other than cast iron) or steel / or: Manufacture from materials of heading 7206, 7207, 7208, 7209, 7210, 7211, 7212, 7218, 7219, 7220 or 7224
EU-Canada CETA · Canada
A change from any other heading.
EPA Eastern and Southern Africa
Tube or pipe fittings of stainless steel (ISO No X5CrNiMo 1712), consisting of several parts / or: Turning, drilling, reaming, threading, deburring and sandblasting of forged blanks the value of which does not exceed 35 % of the ex-works price of the product
EU-Japan EPA · Japan
CC except from headings 72.13 to 72.17, 72.21 to 72.23 and 72.25 to 72.29. CTH except from forged blanks of heading 72.07; however, non-originating forged blanks of heading 72.07 may be used provided that their value does not exceed 50 % of the EXW or 45 % of the FOB of the product. CTH
EU-Viet Nam FTA · Vietnam
other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel; / or: Manufacture from materials of any Chapter except that of the product.
Source: European Commission, Access2Markets (CC BY 4.0, shortened). The text of the agreement prevails. Access2Markets
Legal and explanatory notes for 7306000000
7306 CN Explanatory Notes: Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel
The explanatory note to heading 7304 applies, mutatis mutandis.
7306 30 11 CN Explanatory Notes: and 7306 30 19
Precision tubes, with a wall thickness These subheadings cover both precision tubes not further worked than calibrated and precision tubes welded and cold-drawn. 1. Tubes not further worked than calibrated These tubes are generally obtained by continuous welding, without filler metal, by electrical resistance or induction welding, from coiled flat-rolled products, hot-rolled or cold-rolled, after cold forming in the longitudinal direction. For the most part, their surfaces are free of scale and oiled, as a result of lubrication during forming, welding and calibrating. There is no external weld seam, this having been ground down immediately after welding. In some cases, the weld seam is also removed from the internal surface of the product. Following cold working and calibration, these products are delivered in the work-hardened state, unless heat treatment for the regeneration of the structure is not required. They are mainly used for the manufacture of parts of motor vehicles or machines, metal furniture, bicycle frames, perambulators, gates and balustrades. They meet the requiements of ISO Standard 3306 and the relevant national standards. 2. Welded, drawn tubes These tubes can be distinguished from welded precision tubes not further worked than calibrated, by the fact that no trace of a weld seam exists on either the external or the internal surface of the tube and that their dimensional tolerances are stricter. Their uses are the same as those in subheadings 7304 31 20 and 7304 51 81. They meet the requirements of ISO Standard 3305, or those of ISO Standards 6758 and 9330 if they are used for pressure vessels.
7306 30 19 CN Explanatory Notes: and 7306 30 19
Precision tubes, with a wall thickness These subheadings cover both precision tubes not further worked than calibrated and precision tubes welded and cold-drawn. 1. Tubes not further worked than calibrated These tubes are generally obtained by continuous welding, without filler metal, by electrical resistance or induction welding, from coiled flat-rolled products, hot-rolled or cold-rolled, after cold forming in the longitudinal direction. For the most part, their surfaces are free of scale and oiled, as a result of lubrication during forming, welding and calibrating. There is no external weld seam, this having been ground down immediately after welding. In some cases, the weld seam is also removed from the internal surface of the product. Following cold working and calibration, these products are delivered in the work-hardened state, unless heat treatment for the regeneration of the structure is not required. They are mainly used for the manufacture of parts of motor vehicles or machines, metal furniture, bicycle frames, perambulators, gates and balustrades. They meet the requiements of ISO Standard 3306 and the relevant national standards. 2. Welded, drawn tubes These tubes can be distinguished from welded precision tubes not further worked than calibrated, by the fact that no trace of a weld seam exists on either the external or the internal surface of the tube and that their dimensional tolerances are stricter. Their uses are the same as those in subheadings 7304 31 20 and 7304 51 81. They meet the requirements of ISO Standard 3305, or those of ISO Standards 6758 and 9330 if they are used for pressure vessels.
7306 30 41 CN Explanatory Notes: and 7306 30 49
Threaded or threadable tubes (gas pipe) These tubes are made by the weld-forging process after hot working. For the other characteristics and uses, see the explanatory note to subheadings 7304 39 52 and 7304 39 58.
7306 30 49 CN Explanatory Notes: and 7306 30 49
Threaded or threadable tubes (gas pipe) These tubes are made by the weld-forging process after hot working. For the other characteristics and uses, see the explanatory note to subheadings 7304 39 52 and 7304 39 58.
7306 50 20 CN Explanatory Notes: Precision tubes
See the explanatory note to subheadings 7306 30 11 and 7306 30 19.
Notes to chapter 73
Notes 1. In this chapter, the expression ‘cast iron’ applies to products obtained by casting in which iron predominates by weight over each of the other elements and which do not comply with the chemical composition of steel as defined in note 1(d) to Chapter 72. 2. In this chapter, the word ‘wire’ means hot- or cold-formed products of any cross-sectional shape, of which no cross-sectional dimension exceeds 16 mm.
Sources: Combined Nomenclature 2026, Annex I to Regulation (EEC) No 2658/87 (CELEX 32025R1926), and the Explanatory Notes to the Combined Nomenclature (CELEX 02019XC0329(02)-20260213). The section and chapter notes are legally binding; the explanatory notes are guidance. EUR-Lex
EU classification regulations for 7306000000
Commission regulations that classified specific goods under this code. They bind customs in every member state for identical goods.
- 7306 30 77 Jul 23, 2013 · Regulation on EUR-Lex
Welded pipes of non-alloy steel, of circular cross–section of a length of 3 or 6 m, wall thickness of 2,6 to 3,6 mm and an external diameter of 33,7 to 114,2 mm, with grooves at both ends.
They are intended to be used as pipes in sprinkler systems. (*1) See image.
Reasons
Classification is determined by General Rules 1 and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 7306 , 7306 30 and 7306 30 77 . Given its objective characteristics and properties, the goods meet the terms of heading 7306 . This heading covers also pipes and tubes that are used, for example, in machines of Chapter 84 (see also the Harmonised System Explanatory Notes to heading 7306 ). The intended use of the pipes is not inherent to their objective characteristics as they are not of a particular shape, they are not made up into specific identifiable articles and therefore, upon presentation, they cannot be identified as parts of a mechanical appliance for projecting, dispersing or spraying liquids or powders of heading 8424 . The grooves just serve for connecting the pipes. Consequently, classification as parts of mechanical appliances of heading 8424 is excluded. The pipes are therefore to be classified under CN code 7306 30 77 as other welded pipes of non-alloy steel.
UK advance tariff rulings for 7306000000
Rulings of HM Revenue & Customs for goods with UK commodity codes that start like this EU code. The UK tariff differs from the EU tariff, so these rulings are guidance for the EU.
- UK 7306301200 Valid Apr 10, 2025 to Apr 9, 2028 · Ruling 600012803 on GOV.UK
Smooth Bore Welded Steel Tubes Used for Hydraulic Cylinders The product is the outer cylinder barrel which houses the piston. The product is a welded steel tube, cold-drawn to provide a smooth mirror finish internal bore and manufactured to precision tolerances on the outer and inner dimensions, precision cut to length or in random lengths. Outside diameter min 30-145 mm Thickness min 2.5 - 7.5 mm Material is packaged in bundles with metal straps.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIRs): GIR 1 has been used to classify this product by the terms of heading 7306 Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel GIR 5b has been used to identify the type of packaging GIR 6 has been used to classify the goods to subheading level 730630 Other, welded, of circular cross-section, of iron or non-alloy steel 8-digit code 73063012 - precision tubes; Cold-drawn or cold-rolled (cold-reduced) Also Classified in Accordance with: Chapter 73 section XV General note (1) Harmonised System Explanatory Notes (HSENs) to heading 7306
Source: HM Revenue & Customs, Advance Tariff Rulings. Contains public sector information licensed under the Open Government Licence v3.0.
Restrictions and flags for 7306000000
- CBAM: carbon border adjustment Regulation (EU) 2023/956, Annex I 7306
Sector: iron and steel
Read the act on EUR-Lex - Russia sanctions: import ban Regulation (EU) No 833/2014, Annex XVII 7306
Art. 3g, iron and steel products
Read the act on EUR-Lex - Russia sanctions: export ban Regulation (EU) No 833/2014, Annex XXIII 7306
Art. 3k, goods contributing to Russian industrial capacity
Read the act on EUR-Lex
For orientation only. Check the act before you rely on a flag; thresholds, derogations and exceptions are not shown in full.
Import VAT in the EU
- Austria 20 %
- Belgium 21 %
- Bulgaria 20 %
- Croatia 25 %
- Cyprus 19 %
- Czechia 21 %
- Denmark 25 %
- Estonia 24 %
- Finland 25.5 %
- France 20 %
- Germany 19 %
- Greece 24 %
- Hungary 27 %
- Ireland 23 %
- Italy 22 %
- Latvia 21 %
- Lithuania 21 %
- Luxembourg 17 %
- Malta 18 %
- Netherlands 21 %
- Poland 23 %
- Portugal 23 %
- Romania 21 %
- Slovakia 23 %
- Slovenia 22 %
- Spain 21 %
- Sweden 25 %
Standard rate per member state, on the customs value, the duty and transport to the destination. Reduced rates often depend on the use or the buyer and apply only where the country provides them for these goods. Source: European Commission, Taxes in Europe Database, as of Nov 2, 2026.
Rules of origin
Preferential rules of origin for subheading 730600 depend on the trade agreement. The Commission publishes them in Access2Markets.
Rules of origin on Access2MarketsInformation
When importing or exporting "Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel", it is crucial to have the correct HS code or TARIC code. The HS code 7306000000 80 serves as the standard code for this product, ensuring that the appropriate duties and taxes are applied when crossing international borders.
To ensure your business transactions run smoothly when importing or exporting "Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel", consider the following points:
- Inform yourself about the specific import and export regulations in the countries involved. This includes possible restrictions, taxes, and duties applicable to "Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel".
- Check if any additional licenses, permits, or certificates are required to import "Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel" into the destination country or export it from the country of origin.
- Make sure your trading partners have valid identification numbers, such as EORI numbers (Economic Operators Registration and Identification) in the EU, to streamline trade and minimize delays.
- Ensure that all trade- and customs-related documents (such as commercial invoices, packing lists, certificates of origin, and insurance policies) are accurately completed and adhere to the respective national regulations.
- Keep an eye on the current exchange rates, as well as packaging, shipping, and insurance costs, to accurately calculate trade costs.
In summary, the HS code or TARIC code for "Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel" is 7306000000 80. Make sure you accurately use this code in all your trade and customs documents to guarantee smooth and hassle-free transactions. With these tips, you'll be better prepared for the challenges of international trade and can successfully import and export "Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel".
HS Code structure
1. Chapter
There are 21 different sections, which are divided into 96 chapters. Exceptional chapters include chapter 77, which is reserved for future use, chapters 98 and 99, which are limited at national level, and chapter 99, which is a specific code for temporary changes. In the example above, chapter 73 was selected for articles of iron or steel
2. Heading
The heading determines the specific category within a certain chapter. In the example above, the 06 refers to Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel.
HS Code tree structure
7300000000 80
Chapter ARTICLES OF IRON OR STEEL
7306000000 80
Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel
7306110000 10
- Line pipe of a kind used for oil or gas pipelines
7306110000 80
- - Welded, of stainless steel
7306190000 80
- - Other
7306210000 10
- Casing and tubing of a kind used in drilling for oil or gas
7306210000 80
- - Welded, of stainless steel
7306290000 80
- - Other
7306300000 80
- Other, welded, of circular cross-section, of iron or non-alloy steel
7306301200 10
- - Precision tubes
7306301200 80
- - - Cold-drawn or cold-rolled (cold-reduced)
7306301800 80
- - - Other
7306304100 10
- - Other
7306304100 20
- - - Threaded or threadable tubes (gas pipe)
7306304100 80
- - - - Plated or coated with zinc
7306304120 80
- - - - - Tubes and pipes of an external diameter not exceeding 168,3 mm
7306304190 80
- - - - - Other
7306304900 80
- - - - Other
7306304920 80
- - - - - Tubes and pipes of an external diameter not exceeding 168,3 mm
7306304990 80
- - - - - Other
7306307200 10
- - - Other, of an external diameter
7306307200 20
- - - - Not exceeding 168,3 mm
7306307200 80
- - - - - Plated or coated with zinc
7306307280 80
- - - - - - Tubes and pipes
7306307290 80
- - - - - - Other
7306307700 80
- - - - - Other
7306307780 80
- - - - - - Tubes and pipes
7306307790 80
- - - - - - Other
7306308000 80
- - - - Exceeding 168,3 mm but not exceeding 406,4 mm
7306400000 80
- Other, welded, of circular cross-section, of stainless steel
7306402000 80
- - Cold-drawn or cold-rolled (cold-reduced)
7306408000 80
- - Other
7306500000 80
- Other, welded, of circular cross-section, of other alloy steel
7306502100 10
- - Precision tubes
7306502100 80
- - - Cold-drawn or cold-rolled (cold-reduced)
7306502900 80
- - - Other
7306508000 80
- - Other
7306610000 10
- Other, welded, of non-circular cross-section
7306610000 80
- - Of square or rectangular cross-section
7306611000 80
- - - Of stainless steel
7306619200 10
- - - Other
7306619200 80
- - - - With a wall thickness not exceeding 2 mm
7306619900 80
- - - - With a wall thickness exceeding 2 mm
7306690000 80
- - Of other non-circular cross-section
7306691000 80
- - - Of stainless steel
7306699000 80
- - - Other
7306900000 80
- Other