New Describe a product, get the CN code. Also as API and MCP for AI agents. Try it free
Jump to content

Tariff number 7307000000 80 - Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel

Email me changes

Import trade restrictions for 7307000000 80

This table contains information on trade restrictions for the import of goods into the EU and the EU into third countries. The table contains information on trade restrictions which are imposed due to customs unions, preferences, tariff quotas, customs unions, veterinary controls, third country duties and non-preferential tariff quotas.

Duties 52
FO
Faroe Islands FO
01-01-1997
0 %
Tariff preference 142
SM
San Marino SM
01-01-2006
0 %
Customs union duty 106
1007
EU-Switzerland agreement: re-imported goods 1007
01-01-2007
0 %
Tariff preference 142
2020
GSP - General arrangements 2020
01-01-2017
0 %
Tariff preference 142
EC
Ecuador EC
01-01-2017
0 %
Tariff preference 142
2080
OCTs (Overseas Countries and Territories) 2080
01-01-2021
0 %
Tariff preference 142
VN
Viet Nam VN
01-08-2020
0 %
Tariff preference 142
GE
Georgia GE
01-09-2014
0 %
Tariff preference 142
SY
Syria SY
01-11-1978
0 %
Tariff preference 142
1011
ERGA OMNES 1011
01-11-2018
0 %
Airworthiness tariff suspension 119
1011
ERGA OMNES 1011
01-11-2026
3 EUR
Low-value consignment customs duty 107
CH
Switzerland CH
07-12-2003
0 %
Tariff preference 142
ZA
South Africa ZA
10-10-2016
0 %
Tariff preference 142
AD
Andorra AD
01-01-2006
0 %
Customs union duty 106
2005
GSP-EBA (Special arrangement for the least-developed countries - Everything But Arms) 2005
01-01-2014
0 %
Tariff preference 142
2027
GSP+ (incentive arrangement for sustainable development and good governance) 2027
01-01-2014
0 %
Tariff preference 142
MD
Moldova, Republic of MD
01-01-2016
0 %
Tariff preference 142
GB
United Kingdom GB
01-01-2021
0 %
Tariff preference 142
GH
Ghana GH
01-01-2027
0 %
Tariff preference 142
SG
Singapore SG
01-01-2027
0 %
Tariff preference 142
CL
Chile CL
01-02-2025
0 %
Tariff preference 142
TN
Tunisia TN
01-03-1998
0 %
Tariff preference 142
MA
Morocco MA
01-03-2000
0 %
Tariff preference 142
LB
Lebanon LB
01-04-2006
0 %
Tariff preference 142
JO
Jordan JO
01-05-2002
0 %
Tariff preference 142
EG
Egypt EG
01-06-2004
0 %
Tariff preference 142
2012
EEA - European Economic Area 2012
01-07-2007
0 %
Tariff preference 142
KR
Korea, Republic of (South Korea) KR
01-07-2011
0 %
Tariff preference 142
MX
Mexico MX
01-07-2016
0 %
Tariff preference 142
KE
Kenya KE
01-07-2024
0 %
Tariff preference 142
US
United States US
01-07-2026
0 %
Tariff preference 142
2200
Central America 2200
01-08-2013
0 %
Tariff preference 142
CO
Colombia CO
01-08-2013
0 %
Tariff preference 142
DZ
Algeria DZ
01-09-2005
0 %
Tariff preference 142
1011
ERGA OMNES 1011
01-11-2026
2 EUR
Union handling fee 800
CI
Ivory Coast CI
02-12-2019
0 %
Tariff preference 142
2000
Preferential origin in accordance with the Agreement in the form of an Exchange of Letters between the European Union and the Kingdom of Morocco on the amendment of Protocols 1 and 4 to the Euro-Mediterranean Agreement establishing an association between the European Communities and their Member States, of the one part, and the Kingdom of Morocco, of the other part. 2000
03-10-2025
0 %
Tariff preference 142
CM
Cameroon CM
04-08-2014
0 %
Tariff preference 142
BY
Belarus BY
05-06-2022
Import prohibition 277
XL
Melilla XL
07-12-2003
0 %
Accession act0001/85
Tariff preference 142
XC
Ceuta XC
07-12-2003
0 %
Accession act0001/85
Tariff preference 142
PS
Occupied palestinian Territory PS
07-12-2003
0 %
Tariff preference 142
1035
SADC EPA 1035
10-10-2016
0 %
Tariff preference 142
1034
Eastern and Southern Africa States 1034
14-05-2012
0 %
Tariff preference 142
GH
Ghana GH
15-12-2016
– 31-12-2026
0 %
Tariff preference 142
IL
Israel IL
16-05-2023
0 %
Tariff preference 142
SB
Solomon Islands SB
17-05-2020
0 %
Tariff preference 142
PG
Papua New Guinea PG
20-12-2009
0 %
Tariff preference 142
SG
Singapore SG
21-11-2019
– 31-12-2026
0 %
Tariff preference 142
FJ
Fiji FJ
28-07-2014
0 %
Tariff preference 142
1033
CARIFORUM 1033
29-12-2008
0 %
Tariff preference 142
WS
Samoa WS
31-12-2018
0 %
Tariff preference 142
Controls and documents 5
1008
All third countries 1008
01-01-2026
– 31-12-2026
Document required
banned without it
Carbon Border Adjustment Mechanism - CBAM 775
RU
Russian Federation RU
19-12-2023
– 31-12-2027
Document required
banned without it
Import control 763
1008
All third countries 1008
19-12-2023
– 31-12-2027
Document required
banned without it
Import control 763
UA
Ukraine UA
24-06-2026
Document required
banned without it
Import control 762
UA
Ukraine UA
24-06-2026
Document required
banned without it
Import control 760

Explanation of trade restrictions

Erga Omnes means "for all".

Third countries are countries that are not part of the EU.

GSP means "Generalised System of Preferences".

GSP Plus means "Generalised System of Preferences Plus".

European Economic Area (EEA) means all EU member states and Iceland, Liechtenstein and Norway.

OCTs stands for "Overseas Countries and Territories". They are countries and territories that are not part of the EU. More information

CARIFORUM is a regional economic integration organisation comprising 15 Caribbean Community (CARICOM) countries and the Dominican Republic.

SADC EPA stands for "Southern African Development Community - Economic Partnership Agreement".

Duty means "customs duties".

Estimate the import cost for 7307000000

  • Customs value €1,000.00
  • No third-country duty is recorded for this origin.
  • Import VAT 19 % €190.00
  • Total €1,190.00

May be lower under conditions:

  • Airworthiness tariff suspension: 0 %

Documents and checks for China

An estimate only. The customs value is the price including transport and insurance to the EU border. Excise duties, other fees and producer-specific anti-dumping rates are not included. Preferential rates need valid proof of origin. Country groups and exclusions: TARIC, as of November 2026.

Export measures for 7307000000

What applies when these goods leave the EU: export controls, dual-use and other authorisations, bans per destination and the supplementary unit of the export declaration.

Measures 1
KP
North Korea (Democratic People’s Republic of Korea) KP
28-02-2018
Export prohibition 278
Controls and documents 3
BY
Belarus BY
25-02-2025
Document required
banned without it
Export control 766
UA
Ukraine UA
25-02-2025
Document required
banned without it
Export control 709
UA
Ukraine UA
25-08-2022
Document required
banned without it
Export control 767

History

Duty rates and measures for this code over time (yearly snapshots).

Preferential rules of origin for 7307000000

What the goods must meet to count as originating in a partner country and get the preferential duty, per agreement.

  • Autonomous Trade Preferences (Western Balkans) · Kosovo

    EU-Chile Association Agreement · Chile

    EU-Algeria Association Agreement · Algeria

    EEA/EFTA agreements (Switzerland, Norway, Liechtenstein, Faroe Islands) · Faroe Islands, Liechtenstein, Norway, Switzerland

    EU-Egypt Association Agreement · Egypt

    EU-Georgia DCFTA · Georgia

    EU-Iceland FTA · Iceland

    EU-Jordan Association Agreement · Jordan

    EU-Central America Association Agreement

    EU-Lebanon Association Agreement · Lebanon

    EU-Morocco Association Agreement · Morocco

    EU-Moldova DCFTA · Moldova

    Pan-Euro-Mediterranean (PEM) Convention · Albania, Andorra, Bosnia & Herzegovina, Egypt, Faroe Islands, Iceland, Kosovo, Liechtenstein, Montenegro, North Macedonia, Norway, Palestine, Switzerland, Türkiye

    EU-Singapore FTA · Singapore

    EU-Tunisia Association Agreement · Tunisia

    EU-Ukraine DCFTA · Ukraine

    Tube or pipe fittings of stainless steel (ISO No X5CrNiMo 1712), consisting of several parts / or: Turning, drilling, reaming, threading, deburring and sandblasting of forged blanks, provided that the total value of the forged blanks used does not exceed 35 % of the ex-works price of the product

  • EPA CARIFORUM

    EU Market Access Regulation (EPA) · Cameroon, Côte d’Ivoire, Ghana, Kenya

    EPA Pacific · Fiji, Papua New Guinea, Samoa, Solomon Islands

    EU-Israel Association Agreement · Israel

    EU-Mexico Global Agreement · Mexico

    Tube or pipe fittings of stainless steel (ISO No X5CrNiMo 1712), consisting of several parts / or: Turning, drilling, reaming, threading, deburring and sandblasting of forged blanks the value of which does not exceed 35 % of the ex-works price of the product

  • Generalised Scheme of Preferences (GSP, GSP+, EBA) · Armenia, India, Kenya, Pakistan, Samoa, Solomon Islands, Syria, Vietnam

    EU-Jordan Association Agreement (relaxed rules, 2016) · Jordan

    Tube or pipe fittings of stainless steel / or: Turning, drilling, reaming, threading, deburring and sandblasting of forged blanks, provided that the total value of the forged blanks used does not exceed 35 % of the ex-works price of the product

  • EU-Colombia/Peru/Ecuador Trade Agreement · Colombia, Ecuador, Peru

    Tube or pipe fittings of stainless steel (ISO No X5CrNiMo 1712), consisting of several parts / or: Turning, drilling, reaming, threading, deburring and sandblasting of forged blanks, provided that the total value of the forged blanks used does not exceed 35 per cent of the ex-works price of the product

  • EPA Eastern and Southern Africa

    Structures (excluding prefabricated buildings of heading No 9406) and parts of structures (for example, bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frame-works, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns), of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel / or: Manufacture in which all the materials used are classified within a heading other than that of the product. However, welded angles, shapes and sections of heading No 7301 may not be used

  • EU-Korea FTA · South Korea

    Articles of iron or steel; except for: / or: Manufacture from materials of any heading, except that of the product

  • EU-Palestine Interim Association Agreement · Palestine

    Tube or pipe fittings of stainless steel (ISO No X5CrNiMo 1712), consisting of several parts / or: Turning, drilling, reaming, threading, deburring and sandblasting of forged blanks the value of which does not exceed 35% of the ex-works price of the product

  • EPA SADC · South Africa

    Tube or pipe fittings of stainless steel (ISO No X5CrNiMo 1712), consisting of several parts / or: Turning, drilling, reaming, threading, deburring and sandblasting of forged blanks the value of which does not exceed 35 % of the ex–works price of the product

  • EU-Viet Nam FTA · Vietnam

    tube or pipe fittings of stainless steel (ISO No X5CrNiMo 1712), consisting of several parts; and / or: Turning, drilling, reaming, threading, deburring and sandblasting of forged blanks, provided that the total value of the forged blanks used does not exceed 35 % of the ex-works price of the product.

Source: European Commission, Access2Markets (CC BY 4.0, shortened). The text of the agreement prevails. Access2Markets

Legal and explanatory notes for 7307000000

7307 11 10 CN Explanatory Notes: and 7307 11 90

Of non-malleable cast iron The expression ‘non-malleable’ includes lamellar graphite cast iron. These subheadings cover cast-iron fittings, such as elbows, bends, sleeves, ties, collars and tees. They are connected to tubes or pipes of cast iron or steel by screwing, contact or by mechanical assembly.

7307 11 90 CN Explanatory Notes: and 7307 11 90

Of non-malleable cast iron The expression ‘non-malleable’ includes lamellar graphite cast iron. These subheadings cover cast-iron fittings, such as elbows, bends, sleeves, ties, collars and tees. They are connected to tubes or pipes of cast iron or steel by screwing, contact or by mechanical assembly.

7307 23 10 CN Explanatory Notes: Elbows and bends

This subheading includes elbows and bends of constant thickness throughout their generating lines, as described in ISO Standard 3419-1981 and in the relevant national standards. Their ends are cut square and, in products with thicker walls, are chamfered to facilitate welding to the tubes. The fittings are presented with either 45° or 90° bends (known as elbows) or with 180° bends (known as bends). This subheading also covers elbows and bends the thickness of which is not constant.

7307 23 90 CN Explanatory Notes: Other

This subheading covers mainly tees and crosses, sleeves, plugs and concentric or eccentric reducers described in ISO Standard 3419-1981 and in the relevant national standards. With respect to the finishing of the ends, see the explanatory note to subheading 7307 23 10.

7307 93 11 CN Explanatory Notes: Elbows and bends

See the explanatory note to subheading 7307 23 10.

7307 93 19 CN Explanatory Notes: Other

See the explanatory note to subheading 7307 23 90.

7307 93 91 CN Explanatory Notes: Elbows and bends

See the explanatory note to subheading 7307 23 10.

7307 93 99 CN Explanatory Notes: Other

See the explanatory note to subheading 7307 23 90.

Notes to chapter 73

Notes 1. In this chapter, the expression ‘cast iron’ applies to products obtained by casting in which iron predominates by weight over each of the other elements and which do not comply with the chemical composition of steel as defined in note 1(d) to Chapter 72. 2. In this chapter, the word ‘wire’ means hot- or cold-formed products of any cross-sectional shape, of which no cross-sectional dimension exceeds 16 mm.

Sources: Combined Nomenclature 2026, Annex I to Regulation (EEC) No 2658/87 (CELEX 32025R1926), and the Explanatory Notes to the Combined Nomenclature (CELEX 02019XC0329(02)-20260213). The section and chapter notes are legally binding; the explanatory notes are guidance. EUR-Lex

EU classification regulations for 7307000000

Commission regulations that classified specific goods under this code. They bind customs in every member state for identical goods.

  • 7307 93 19 Jan 5, 2015 · Regulation on EUR-Lex
    ‘T’ shaped article of steel. The external diameter of the shoulders is 23 mm and the largest diameter of the central part of the article is 40 mm. Its lateral endings are bevelled, suitable for butt welding, and its third ending is threaded on the inside.

    The lateral endings are to be welded in between the panels of the radiator. The third ending is used for installing either a vent valve or a regulating valve, or for connecting the radiator with a pipe that connects it to, for example, a boiler. See the image (*1).

    Reasons

    Classification is determined by general rules 1 and 6 for the interpretation of the Combined Nomenclature, note 2(a) to Section XV, and by the wording of CN codes 7307 , 7307 93 and 7307 93 19 . The article has the objective characteristics of tube and pipe fittings classified under heading 7307 . Articles of heading 7307 are, in accordance with note 2(a) to Section XV, parts of general use. As references to parts, inter alia, in Chapter 73 do not include references to parts of general use as defined in that note, classification of the article under heading 7322 as a part of radiators for central heating is excluded (see also the Harmonised System Explanatory Notes to heading 7322 , point (2)(a)). The article is therefore to be classified under CN code 7307 93 19 as other butt welding tube or pipe fittings of steel with the greatest external diameter not exceeding 609,6 mm.

UK advance tariff rulings for 7307000000

Rulings of HM Revenue & Customs for goods with UK commodity codes that start like this EU code. The UK tariff differs from the EU tariff, so these rulings are guidance for the EU.

  • UK 7307111000 Valid Aug 22, 2025 to Aug 21, 2028 · Ruling 600013365 on GOV.UK

    This product is a mechanical compression joint with a body and nut made of ductile non-malleable iron, thrust washer made of steel, end load washer made of spring steel, and a gasket made of rubber. The fitting has a closed body to effectively seal the end of a plain, unthreaded steel pipe or service. The compression joint is suitable for low and medium pressure installations. The compression joint has corrosion protection made of light oil film. The product provides a high strength transition fitting for a polyethylene gas service pipe to a plain ended Steel pipe for below ground installations, also available for Steel to Steel pipe connections without threading.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify the product to heading 7307 - Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel GIR 6 has been used to classify the goods to subheading level 730711 - Cast fittings; Of non-malleable cast iron Eight digit code 73071110 - Of a kind used in pressure systems Also classified in accordance with: Note 3 to Section XV Harmonised System Explanatory Notes (HSENs) to heading 7307

  • UK 7307231055 Valid Nov 19, 2025 to Nov 18, 2028 · Ruling 600013939 on GOV.UK

    The elbows are used in pipelines to change the angle of the pipeline. They are made from stainless steel. The stainless steel elbow is welded into a pipeline to change angle of pipeline, but keep a continued flow.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 has been used to classify this product by the terms of heading 7307 - Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel GIR 6 has been used to classify the goods to subheading level 7307 23 - Other, of stainless steel; Butt welding fittings 8 Digit Code 730723 10 - Elbows and Bends; Of austenitic stainless steel grades, corresponding to AISI types 304, 304L, 316, 316L, 316Ti, 321 and 321H and their equivalent in the other norms, with a greatest external diameter not exceeding 406.4 mm and a wall thickness of 16 mm or less, with a roughness average (Ra) of the internal surface not less than 0.8 micrometres, not flanged, …

  • UK 7307239055 Valid Jul 24, 2026 to Jul 23, 2029 · Ruling 600015806 on GOV.UK

    Individually packaged stainless steel pipefittings. Butt welded tee pieces in various sizes, minimum diameter 12.7mm, maximum of 406mm outside diameter. All sizes have a maximum wall thickness of no more than 2mm ,with a roughness average (ra) of the internal surface 0.8 microns and not cast or flanged. Intended use is for welding into pipelines

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 7307 - Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel GIR 5 (b) has been used to identify normal packaging for transport GIR 6 has been used to classify the goods to sub-heading Code to 8 digits - 7307 2390 – other than elbows and bends Code to 10 digits - 7307 2390 55- Of austenitic stainless steel grades, corresponding to aisi types 304, 304l, 316, 316l, 316ti, 321 and 321h and their equivalent in the other norms, with a greatest external diameter not exceeding 406.4 mm and a wall thickness of 16 mm or less, with a …

+ 8 more
  • UK 7307239085 Valid Mar 11, 2026 to Mar 10, 2029 · Ruling 600014690 on GOV.UK

    The product is a stainless-steel pipe connection; this is used for quick access to open a pipeline. One end is welded, and the other end sits in the nut part of the union. The screw nut closes or opens the union for quick access to open the line. Made from from forging Stainless Steel austenitic 316 L. These unions are used as they are quick release to allow cleaning or inspection of the line/filter or machine. Packed in packs of 10 pcs.

    Justification

    Classification has been determined in accordance with the following: - General Interpretative Rules (GIR)s: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - has been used to classify this product by the terms of heading 7307 - Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel. GIR 5 (b) - Has been used to identify the type of packaging. Normally supplied in packs of 10 pcs. GIR 6 - has been used to classify the goods to subheading level 730723 - Other; of stainless steel; butt welding fittings. 8-digit code 73072390 - Other than elbows and bends. 10-digit code 7307239085 - Other than of austenitic stainless steel grades, corresponding to AISI types 304, 304L, 316, 316L, 316Ti, 321 and 321H and their equivalent in the other norms, …

  • UK 7307239085 Valid Jan 23, 2026 to Jan 22, 2029 · Ruling 600014809 on GOV.UK

    A stainless-steel butt weld fitting ferrule connection, used as a quick release union, allowing quick access to open up a pipeline/filters or machines. One end is welded on, and the other end (flange end) is connected with a quick release clamp. Secured by tightening the screw on the clamp. They are not permanently fixed. Used in pipelines or on filters and machines so a quick release clamp can be fitted. Normally supplied in packs of 10 pcs.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 7307 - Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel GIR 5 (b) - Has been used to identify the type of packaging. Normally supplied in packs of 10 pcs. GIR 6 - Has been used to classify the goods to subheading level 730723 – Butt welding fittings 8 Digit Code 73072390 – Other than elbows and bends 10 Digit Code 7307239085 – Other than for use in certain types of aircraft Also classified in accordance with: Notes 2(a) and 3 to Section XV Note e to Chapter 72 Harmonized System Explanatory Notes (HSENs) to heading …

  • UK 7307239085 Valid Oct 6, 2026 to Oct 5, 2029 · Ruling 600016200 on GOV.UK

    Stainless Steel RJT Union Connection Parts used for joining pipework, filters, tanks or valves in breweries and dairy factories. The connection is made of 4 parts, 1 austenitic hexagon nut, 1 austenitic threaded male, 1 austenitic liner and 1 Rubber EPDM seal. The two end components are to be welded to the pipework whilst the nut and O ring provide a seal and quick release system to separate the two joins when necessary, making the inside easily accessible. The components are individually packed

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 7307 - Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel GIR 5 (b) has been used to identify normal packaging for transport GIR 6 has been used to classify the goods to sub-heading 7307 23 – Butt welding fittings Code to 8 digits -7307 2390 – Other than elbows and bends Code to 10 digits - 7307 2390 85 – Other than for use in certain types of aircraft Also classified in accordance with :- Harmonised Standard Explanatory Notes (HSENs) to heading – 7307

  • UK 7307291090 Valid May 21, 2026 to May 20, 2029 · Ruling 600015655 on GOV.UK

    The BSP unions M/F are used as a threaded connection, it is made from stainless steel. These can be made by either casing or from pipe. These are threaded fittings and are connected by threading one product into the other. The couplings have a female thread and a male thread, fitting is screwed into the coupling. The size range of the couplings are 1/4 inch to 4 inches. Packaged: these are supplied in boxes. Depending on the size, the packages can be from 5 pcs to 100 pcs.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - Has been used to classify this product by the terms of heading 7307 - Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel. GIR 5b - Has been used to identify the type of packaging: Supplied in boxes. GIR 6 - Has been used to classify this product by the terms of heading 7307 29 - Other than; Cast fittings, of stainless steel; Other than; Flanges, threaded elbows, elbows and sleeves, elbows and bends, and butt welding fittings. Digit Code: 730729 10 - Threaded. Digit Code: 73072910 90 - Other than; For use in certain types of aircraft Also Classified in Accordance with: Note 3 to Section XV Harmonized System Explanatory …

  • UK 7307910090 Valid Jun 3, 2024 to Jun 2, 2027 · Ruling 600010534 on GOV.UK

    Carbon Steel Blind Flange used to blank off the end of 'Marine Hose String' to retain residual product The Lightweight Blind Flange is used to blank off the end of a hose string both to retain residual product outboard of the butterfly valve and to protect the Camlock flange face (or other terminating equipment). The Lightweight Blind Flange should not be used for pressure testing

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). Gir 1 has been used to classify this product by the terms of heading 7307: Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel Gir 6 has been used to classify the goods to subheading level 730791: Other than cast fittings or other than of stainless steel; Flanges 10 Digit code 7307910090: Other than for use in certain types of aircraft Also classified in accordance with: Section Note 3 to Section XV Harmonized System Explanatory Note (HSEN's) to heading 7307

  • UK 7307910090 Valid Mar 12, 2026 to Mar 11, 2029 · Ruling 600015099 on GOV.UK

    Mild steel flange made from bar forgings and used to connect pipework together. Using two flanges, bolts are passed through the holes to secure them together. Suitable for use on 15mm (outside diameter) to 606mm (outside diameter) pipework Approximately 1000 kg pallets - these are normally on a wooden pallet and shrink wrapped

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 7307 - Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel GIR 5 (b) - Has been used to identify the type of packaging. Approximately 1000 kg pallets - these are normally on a wooden pallet and shrink wrapped GIR 6 - Has been used to classify the goods to subheading level 730791 - Flanges 10 Digit Code 7307910090 – other than for use in certain types of aircraft Also classified in accordance with: Note 3 to Section XV Harmonized System Explanatory Notes (HSENs) to heading 7307

  • UK 7307929090 Valid Jun 29, 2025 to Jun 28, 2028 · Ruling 600013206 on GOV.UK

    A BU Bend that is a fabricated duct fitting made from galvanized steel, designed for integration into circular air distribution systems. It serves to alter the direction of airflow within heating, ventilation, and air conditioning duct work. The product is manufactured in various fixed angles and diameters to match standard duct sizes. For this particular classification, the bend is for the 90° angle. This bend includes factory-installed EPDM rubber gaskets to ensure airtight mechanical connections without the need for additional sealing materials.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 has been used to classify this product by the terms of heading 7307: Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel GIR 6 has been used to classify the goods to subheading level 730792: Other than cast fittings; Other than of other, of stainless steel 8 Digit code 73079290: Threaded elbows, bends and sleeves; Elbows and bends 10 Digit code 7307929090: Other than for use in certain types of aircraft Also classified in accordance with: Note 3 to Section XV Harmonized System Explanatory Note (HSEN's) to heading 7307

  • UK 7307998099 Valid Apr 26, 2024 to Apr 25, 2027 · Ruling 600010281 on GOV.UK

    The Marine Breakaway Coupling is designed as a safeguard during the offshore transfer of fluids. It works by preventing spillages into the ocean of fluids in the case of unplanned disconnection or pressure surges. The main body of the product is made from forged carbon steel with titanium alloy bolting. It is not threaded and made from carbon steel forgings and then precision machined to an approved design. It has an external diameter not exceeding 609.6mm. The product works by the bolts connecting the 2 halves which break under a specified load tension and each half immediately closes to minimise loss of fluid. It is packaged within fumigated wooden crates.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading 7307 - Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel GIR 5(b) - has been used to identify the type of packaging. Packaged in fumigated wooden crates GIR 6 has been used to classify this product to subheading level 730799 - Other than flanges, threaded elbows, bends and sleeves and butt welding fittings 8 Digit Code 73079980 - Other than threaded 10 digit code 7307998099 - Other than for use in certain types of aircraft; Other than with greatest external diameter not exceeding 609.6mm Also classified in …

Source: HM Revenue & Customs, Advance Tariff Rulings. Contains public sector information licensed under the Open Government Licence v3.0.

Restrictions and flags for 7307000000

  • CBAM: carbon border adjustment Regulation (EU) 2023/956, Annex I 7307

    Sector: iron and steel

    Read the act on EUR-Lex
  • Russia sanctions: import ban Regulation (EU) No 833/2014, Annex XVII 7307

    Art. 3g, iron and steel products

    Read the act on EUR-Lex
  • Russia sanctions: export ban Regulation (EU) No 833/2014, Annex XXIII 7307

    Art. 3k, goods contributing to Russian industrial capacity

    Read the act on EUR-Lex

For orientation only. Check the act before you rely on a flag; thresholds, derogations and exceptions are not shown in full.

Import VAT in the EU

  • Austria 20 %
  • Belgium 21 %
  • Bulgaria 20 %
  • Croatia 25 %
  • Cyprus 19 %
  • Czechia 21 %
  • Denmark 25 %
  • Estonia 24 %
  • Finland 25.5 %
  • France 20 %
  • Germany 19 %
  • Greece 24 %
  • Hungary 27 %
  • Ireland 23 %
  • Italy 22 %
  • Latvia 21 %
  • Lithuania 21 %
  • Luxembourg 17 %
  • Malta 18 %
  • Netherlands 21 %
  • Poland 23 %
  • Portugal 23 %
  • Romania 21 %
  • Slovakia 23 %
  • Slovenia 22 %
  • Spain 21 %
  • Sweden 25 %

Standard rate per member state, on the customs value, the duty and transport to the destination. Reduced rates often depend on the use or the buyer and apply only where the country provides them for these goods. Source: European Commission, Taxes in Europe Database, as of Nov 2, 2026.

Rules of origin

Preferential rules of origin for subheading 730700 depend on the trade agreement. The Commission publishes them in Access2Markets.

Rules of origin on Access2Markets

Information

When importing or exporting "Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel", it is crucial to have the correct HS code or TARIC code. The HS code 7307000000 80 serves as the standard code for this product, ensuring that the appropriate duties and taxes are applied when crossing international borders.

To ensure your business transactions run smoothly when importing or exporting "Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel", consider the following points:

  1. Inform yourself about the specific import and export regulations in the countries involved. This includes possible restrictions, taxes, and duties applicable to "Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel".
  2. Check if any additional licenses, permits, or certificates are required to import "Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel" into the destination country or export it from the country of origin.
  3. Make sure your trading partners have valid identification numbers, such as EORI numbers (Economic Operators Registration and Identification) in the EU, to streamline trade and minimize delays.
  4. Ensure that all trade- and customs-related documents (such as commercial invoices, packing lists, certificates of origin, and insurance policies) are accurately completed and adhere to the respective national regulations.
  5. Keep an eye on the current exchange rates, as well as packaging, shipping, and insurance costs, to accurately calculate trade costs.

In summary, the HS code or TARIC code for "Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel" is 7307000000 80. Make sure you accurately use this code in all your trade and customs documents to guarantee smooth and hassle-free transactions. With these tips, you'll be better prepared for the challenges of international trade and can successfully import and export "Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel".

HS Code structure

73
Chapter
07
Heading
00
Subheading
00
CN Subheading
00
TARIC Subheading
80
Additional TARIC codes

1. Chapter

There are 21 different sections, which are divided into 96 chapters. Exceptional chapters include chapter 77, which is reserved for future use, chapters 98 and 99, which are limited at national level, and chapter 99, which is a specific code for temporary changes. In the example above, chapter 73 was selected for articles of iron or steel

2. Heading

The heading determines the specific category within a certain chapter. In the example above, the 07 refers to Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel.

HS Code tree structure

7300000000 80

Chapter ARTICLES OF IRON OR STEEL

7307000000 80

Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel

7307110000 10

- Cast fittings

7307110000 80

- - Of non-malleable cast iron

7307111000 80

- - - Of a kind used in pressure systems

7307119000 80

- - - Other

7307190000 80

- - Other

7307191000 80

- - - Of cast iron

7307191003 10

- - - - Threaded

7307191003 20

- - - - - Of malleable cast iron

7307191003 80

- - - - - - Bodies of compression fittings using ISO DIN 13 metric thread

7307191005 80

- - - - - - Circular junction boxes without having a lid

7307191010 80

- - - - - - Other

7307191013 10

- - - - - Of spheroidal graphite cast iron

7307191013 80

- - - - - - Bodies of compression fittings using ISO DIN 13 metric thread

7307191015 80

- - - - - - Ductile iron clamp tees with rubber sealing and an outlet hole; ductile iron grooved end caps for use on grooved steel pipe with a threaded outlet; ductile iron grooved reducers with threaded end; ductile iron grooved reducing tees with a threaded outlet; ductile iron blanking saddles without threaded outlets used to seal a hole in a tube or pipe

7307191020 80

- - - - - - Other

7307191030 80

- - - - - Other

7307191034 10

- - - - Unthreaded

7307191034 20

- - - - - Of malleable cast iron

7307191034 80

- - - - - - Circular junction boxes without having a lid

7307191035 80

- - - - - - Other

7307191040 80

- - - - - Of spheroidal graphite cast iron

7307191045 80

- - - - - Other

7307199000 80

- - - Other

7307210000 10

- Other, of stainless steel

7307210000 80

- - Flanges

7307210010 80

- - - For use in certain types of aircraft

7307210090 80

- - - Other

7307220000 80

- - Threaded elbows, bends and sleeves

7307221000 80

- - - Sleeves

7307229000 80

- - - Elbows and bends

7307229010 80

- - - - For use in certain types of aircraft

7307229090 80

- - - - Other

7307230000 80

- - Butt welding fittings

7307231000 80

- - - Elbows and bends

7307231035 10

- - - - Of austenitic stainless steel grades, corresponding to AISI types 304, 304L, 316, 316L, 316Ti, 321 and 321H and their equivalent in the other norms, with a greatest external diameter not exceeding 406.4 mm and a wall thickness of 16 mm or less, with a roughness average (Ra) of the internal surface not less than 0.8 micrometres, not flanged, whether or not finished

7307231035 20

- - - - - Consigned from Malaysia

7307231035 80

- - - - - - For use in certain types of aircraft

7307231040 80

- - - - - - Other

7307231050 10

- - - - - Other

7307231050 80

- - - - - - For use in certain types of aircraft

7307231055 80

- - - - - - Other

7307231080 10

- - - - Other

7307231080 80

- - - - - For use in certain types of aircraft

7307231085 80

- - - - - Other

7307239000 80

- - - Other

7307239035 10

- - - - Of austenitic stainless steel grades, corresponding to AISI types 304, 304L, 316, 316L, 316Ti, 321 and 321H and their equivalent in the other norms, with a greatest external diameter not exceeding 406.4 mm and a wall thickness of 16 mm or less, with a roughness average (Ra) of the internal surface not less than 0.8 micrometres, not flanged, whether or not finished

7307239035 20

- - - - - Consigned from Malaysia

7307239035 80

- - - - - - For use in certain types of aircraft

7307239040 80

- - - - - - Other

7307239050 10

- - - - - Other

7307239050 80

- - - - - - For use in certain types of aircraft

7307239055 80

- - - - - - Other

7307239080 10

- - - - Other

7307239080 80

- - - - - For use in certain types of aircraft

7307239085 80

- - - - - Other

7307290000 80

- - Other

7307291000 80

- - - Threaded

7307291010 80

- - - - For use in certain types of aircraft

7307291090 80

- - - - Other

7307298000 80

- - - Other

7307298010 80

- - - - For use in certain types of aircraft

7307298090 80

- - - - Other

7307910000 10

- Other

7307910000 80

- - Flanges

7307910010 80

- - - For use in certain types of aircraft

7307910090 80

- - - Other

7307920000 80

- - Threaded elbows, bends and sleeves

7307921000 80

- - - Sleeves

7307929000 80

- - - Elbows and bends

7307929010 80

- - - - For use in certain types of aircraft

7307929090 80

- - - - Other

7307930000 80

- - Butt welding fittings

7307931100 10

- - - With greatest external diameter not exceeding 609,6 mm

7307931100 80

- - - - Elbows and bends

7307931111 10

- - - - - For use in certain types of aircraft

7307931111 80

- - - - - - Consigned from Taiwan, Indonesia, Sri Lanka or the Philippines

7307931119 80

- - - - - - Other

7307931130 10

- - - - - Other

7307931130 80

- - - - - - Other threaded fittings

7307931191 10

- - - - - - Other

7307931191 80

- - - - - - - Consigned from Taiwan

7307931193 80

- - - - - - - Consigned from Indonesia

7307931194 80

- - - - - - - Consigned from Sri Lanka

7307931195 80

- - - - - - - Consigned from the Philippines

7307931199 80

- - - - - - - Other

7307931900 80

- - - - Other

7307931911 10

- - - - - For use in certain types of aircraft

7307931911 80

- - - - - - Consigned from Taiwan, Indonesia, Sri Lanka or the Philippines

7307931919 80

- - - - - - Other

7307931930 10

- - - - - Other

7307931930 80

- - - - - - Other threaded fittings

7307931991 10

- - - - - - Other

7307931991 80

- - - - - - - Consigned from Taiwan

7307931993 80

- - - - - - - Consigned from Indonesia

7307931994 80

- - - - - - - Consigned from Sri Lanka

7307931995 80

- - - - - - - Consigned from the Philippines

7307931999 80

- - - - - - - Other

7307939100 10

- - - With greatest external diameter exceeding 609,6 mm

7307939100 80

- - - - Elbows and bends

7307939110 80

- - - - - For use in certain types of aircraft

7307939190 80

- - - - - Other

7307939900 80

- - - - Other

7307939910 80

- - - - - For use in certain types of aircraft

7307939990 80

- - - - - Other

7307990000 80

- - Other

7307991000 80

- - - Threaded

7307991010 80

- - - - For use in certain types of aircraft

7307991090 80

- - - - Other

7307998000 80

- - - Other

7307998011 10

- - - - For use in certain types of aircraft

7307998011 20

- - - - - With greatest external diameter not exceeding 609,6 mm

7307998011 80

- - - - - - Consigned from Taiwan, Indonesia, Sri Lanka or the Philippines

7307998019 80

- - - - - - Other

7307998020 80

- - - - - Other

7307998092 10

- - - - Other

7307998092 20

- - - - - With greatest external diameter not exceeding 609,6 mm

7307998092 80

- - - - - - Consigned from Taiwan

7307998093 80

- - - - - - Consigned from Indonesia

7307998094 80

- - - - - - Consigned from Sri Lanka

7307998095 80

- - - - - - Consigned from the Philippines

7307998098 80

- - - - - - Other

7307998099 80

- - - - - Other