Import trade restrictions for 7318000000 80
This table contains information on trade restrictions for the import of goods into the EU and the EU into third countries. The table contains information on trade restrictions which are imposed due to customs unions, preferences, tariff quotas, customs unions, veterinary controls, third country duties and non-preferential tariff quotas.
| Origin country | Start | Duty / Tax | Legal base Measure type | |
|---|---|---|---|---|
| Faroe Islands FO | 01-01-1997 | 0 % | Tariff preference 142 | |
1011 | ERGA OMNES 1011 | 01-01-2005 | 3.7 % | Third country duty 103 |
| San Marino SM | 01-01-2006 | 0 % | Customs union duty 106 | |
| Türkiye TR | 01-01-2006 | 0 % | Customs union duty 106 | |
| EU-Switzerland agreement: re-imported goods 1007 | 01-01-2007 | 0 % | Tariff preference 142 | |
| Bosnia and Herzegovina BA | 01-01-2009 | 0 % | Tariff preference 142 | |
| North Macedonia MK | 01-01-2009 | 0 % | Tariff preference 142 | |
| Ukraine UA | 01-01-2016 | 0 % | Tariff preference 142 | |
| Ecuador EC | 01-01-2017 | 0 % | Tariff preference 142 | |
2020 | GSP - General arrangements 2020 | 01-01-2017 | 0 % | Tariff preference 142 |
2080 | OCTs (Overseas Countries and Territories) 2080 | 01-01-2021 | 0 % | Tariff preference 142 |
XS | Serbia XS | 01-02-2010 | 0 % | Tariff preference 142 |
| Japan JP | 01-02-2020 | 0 % | Tariff preference 142 | |
| Peru PE | 01-03-2013 | 0 % | Tariff preference 142 | |
| Albania AL | 01-04-2009 | 0 % | Tariff preference 142 | |
| Kosovo XK | 01-04-2016 | 0 % | Tariff preference 142 | |
| Montenegro ME | 01-05-2010 | 0 % | Tariff preference 142 | |
| New Zealand NZ | 01-05-2024 | 0 % | Tariff preference 142 | |
| Syria SY | 01-08-1994 | 0 % | Tariff preference 142 | |
| Viet Nam VN | 01-08-2020 | 0 % | Tariff preference 142 | |
| Georgia GE | 01-09-2014 | 0 % | Tariff preference 142 | |
1011 | ERGA OMNES 1011 | 01-11-2018 | 0 % | Airworthiness tariff suspension 119 |
1011 | ERGA OMNES 1011 | 01-11-2026 | 3 EUR | Low-value consignment customs duty 107 |
| South Africa ZA | 10-10-2016 | 0 % | Tariff preference 142 | |
| Armenia AM | 10-10-2026 – 11-10-2028 | 0 % | Tariff preference 142 | |
| Switzerland CH | 20-12-1972 | 0 % | Tariff preference 142 | |
| Canada CA | 21-09-2017 | 0 % | Tariff preference 142 | |
| EU-Canada agreement: re-imported goods 1006 | 21-09-2017 | 0 % | Tariff preference 142 | |
| Andorra AD | 01-01-2006 | 0 % | Customs union duty 106 | |
2005 | GSP-EBA (Special arrangement for the least-developed countries - Everything But Arms) 2005 | 01-01-2014 | 0 % | Tariff preference 142 |
2027 | GSP+ (incentive arrangement for sustainable development and good governance) 2027 | 01-01-2014 | 0 % | Tariff preference 142 |
| Moldova, Republic of MD | 01-01-2016 | 0 % | Tariff preference 142 | |
| United Kingdom GB | 01-01-2021 | 0 % | Tariff preference 142 | |
| Ghana GH | 01-01-2027 | 0 % | Tariff preference 142 | |
| Singapore SG | 01-01-2027 | 0 % | Tariff preference 142 | |
| Chile CL | 01-02-2025 | 0 % | Tariff preference 142 | |
| Tunisia TN | 01-03-1998 | 0 % | Tariff preference 142 | |
| Morocco MA | 01-03-2000 | 0 % | Tariff preference 142 | |
| Lebanon LB | 01-04-2006 | 0 % | Tariff preference 142 | |
| Jordan JO | 01-05-2002 | 0 % | Tariff preference 142 | |
| Egypt EG | 01-06-2004 | 0 % | Tariff preference 142 | |
2012 | EEA - European Economic Area 2012 | 01-07-2007 | 0 % | Tariff preference 142 |
| Korea, Republic of (South Korea) KR | 01-07-2011 | 0 % | Tariff preference 142 | |
| Mexico MX | 01-07-2016 | 0 % | Tariff preference 142 | |
| Kenya KE | 01-07-2024 | 0 % | Tariff preference 142 | |
| United States US | 01-07-2026 | 0 % | Tariff preference 142 | |
2200 | Central America 2200 | 01-08-2013 | 0 % | Tariff preference 142 |
| Colombia CO | 01-08-2013 | 0 % | Tariff preference 142 | |
| Algeria DZ | 01-09-2005 | 0 % | Tariff preference 142 | |
1011 | ERGA OMNES 1011 | 01-11-2026 | 2 EUR | Union handling fee 800 |
| Ivory Coast CI | 02-12-2019 | 0 % | Tariff preference 142 | |
2000 | Preferential origin in accordance with the Agreement in the form of an Exchange of Letters between the European Union and the Kingdom of Morocco on the amendment of Protocols 1 and 4 to the Euro-Mediterranean Agreement establishing an association between the European Communities and their Member States, of the one part, and the Kingdom of Morocco, of the other part. 2000 | 03-10-2025 | 0 % | Tariff preference 142 |
| Cameroon CM | 04-08-2014 | 0 % | Tariff preference 142 | |
| Belarus BY | 05-06-2022 | Import prohibition 277 | ||
XL | Melilla XL | 07-12-2003 | 0 % | Accession act0001/85 Tariff preference 142 |
XC | Ceuta XC | 07-12-2003 | 0 % | Accession act0001/85 Tariff preference 142 |
| Occupied palestinian Territory PS | 07-12-2003 | 0 % | Tariff preference 142 | |
1035 | SADC EPA 1035 | 10-10-2016 | 0 % | Tariff preference 142 |
1034 | Eastern and Southern Africa States 1034 | 14-05-2012 | 0 % | Tariff preference 142 |
| Ghana GH | 15-12-2016 – 31-12-2026 | 0 % | Tariff preference 142 | |
| Israel IL | 16-05-2023 | 0 % | Tariff preference 142 | |
| Solomon Islands SB | 17-05-2020 | 0 % | Tariff preference 142 | |
| Papua New Guinea PG | 20-12-2009 | 0 % | Tariff preference 142 | |
| Singapore SG | 21-11-2019 – 31-12-2026 | 0 % | Tariff preference 142 | |
| Fiji FJ | 28-07-2014 | 0 % | Tariff preference 142 | |
1033 | CARIFORUM 1033 | 29-12-2008 | 0 % | Tariff preference 142 |
| Samoa WS | 31-12-2018 | 0 % | Tariff preference 142 |
| Origin country | Start | Duty / Tax | Legal base Measure type | |
|---|---|---|---|---|
1008 | All third countries 1008 | 01-01-2026 – 31-12-2026 | Document required banned without it | Carbon Border Adjustment Mechanism - CBAM 775 |
| Russian Federation RU | 19-12-2023 – 31-12-2027 | Document required banned without it | Import control 763 | |
1008 | All third countries 1008 | 19-12-2023 – 31-12-2027 | Document required banned without it | Import control 763 |
| Ukraine UA | 24-06-2026 | Document required banned without it | Import control 762 | |
| Ukraine UA | 24-06-2026 | Document required banned without it | Import control 760 |
Explanation of trade restrictions
Erga Omnes means "for all".
Third countries are countries that are not part of the EU.
GSP means "Generalised System of Preferences".
GSP Plus means "Generalised System of Preferences Plus".
European Economic Area (EEA) means all EU member states and Iceland, Liechtenstein and Norway.
OCTs stands for "Overseas Countries and Territories". They are countries and territories that are not part of the EU. More information
CARIFORUM is a regional economic integration organisation comprising 15 Caribbean Community (CARICOM) countries and the Dominican Republic.
SADC EPA stands for "Southern African Development Community - Economic Partnership Agreement".
Duty means "customs duties".
Estimate the import cost for 7318000000
- Customs value €1,000.00
- Customs duty 3.7 % €37.00
- Import VAT 19 % €197.03
- Total €1,234.03
May be lower under conditions:
- Airworthiness tariff suspension: 0 %
Documents and checks for China
An estimate only. The customs value is the price including transport and insurance to the EU border. Excise duties, other fees and producer-specific anti-dumping rates are not included. Preferential rates need valid proof of origin. Country groups and exclusions: TARIC, as of November 2026.
Export measures for 7318000000
What applies when these goods leave the EU: export controls, dual-use and other authorisations, bans per destination and the supplementary unit of the export declaration.
| Destination | Start | Duty / Tax | Legal base Measure type | |
|---|---|---|---|---|
| North Korea (Democratic People’s Republic of Korea) KP | 28-02-2018 | Export prohibition 278 |
| Destination | Start | Duty / Tax | Legal base Measure type | |
|---|---|---|---|---|
| Belarus BY | 24-04-2026 | Document required banned without it | Export control 766 | |
| Russian Federation RU | 26-07-2026 | Document required banned without it | Export control 709 | |
| Ukraine UA | 25-02-2025 | Document required banned without it | Export control 709 | |
| Ukraine UA | 25-08-2022 | Document required banned without it | Export control 767 |
History
Duty rates and measures for this code over time (yearly snapshots).
Preferential rules of origin for 7318000000
What the goods must meet to count as originating in a partner country and get the preferential duty, per agreement.
Autonomous Trade Preferences (Western Balkans) · Kosovo
EU-Chile Association Agreement · Chile
EU-Algeria Association Agreement · Algeria
EEA/EFTA agreements (Switzerland, Norway, Liechtenstein, Faroe Islands) · Faroe Islands, Liechtenstein, Norway, Switzerland
EU-Egypt Association Agreement · Egypt
EU-Georgia DCFTA · Georgia
Generalised Scheme of Preferences (GSP, GSP+, EBA) · Armenia, India, Kenya, Pakistan, Samoa, Solomon Islands, Syria, Vietnam
EU-Iceland FTA · Iceland
EU-Jordan Association Agreement · Jordan
EU-Jordan Association Agreement (relaxed rules, 2016) · Jordan
EU-Korea FTA · South Korea
EU-Central America Association Agreement
EU-Lebanon Association Agreement · Lebanon
EU-Morocco Association Agreement · Morocco
EU-Moldova DCFTA · Moldova
Pan-Euro-Mediterranean (PEM) Convention · Albania, Andorra, Bosnia & Herzegovina, Egypt, Faroe Islands, Iceland, Kosovo, Liechtenstein, Montenegro, North Macedonia, Norway, Palestine, Switzerland, Türkiye
EU-Singapore FTA · Singapore
EU-Tunisia Association Agreement · Tunisia
EU-Ukraine DCFTA · Ukraine
Articles of iron or steel; except for: / or: Manufacture from materials of any heading, except that of the product
EPA CARIFORUM
EU Market Access Regulation (EPA) · Cameroon, Côte d’Ivoire, Ghana, Kenya
EPA Pacific · Fiji, Papua New Guinea, Samoa, Solomon Islands
EU-Mexico Global Agreement · Mexico
EU-Palestine Interim Association Agreement · Palestine
EPA SADC · South Africa
Articles of iron or steel; except for: / or: Manufacture in which all the materials used are classified within a heading other than that of the product
EU-Canada CETA · Canada
A change from any other heading.
EU-Colombia/Peru/Ecuador Trade Agreement · Colombia, Ecuador, Peru
Articles of iron or steel; except for: / or: Manufacture from materials of any heading, except that of the product [95]
EPA Eastern and Southern Africa
Sheet piling / or: Manufacture from materials of heading No 7206
EU-Japan EPA · Japan
CTH
EU-Viet Nam FTA · Vietnam
Articles of iron or steel; except for: / or: Manufacture from materials of any heading, except that of the product.
Source: European Commission, Access2Markets (CC BY 4.0, shortened). The text of the agreement prevails. Access2Markets
Legal and explanatory notes for 7318000000
7318 11 00 CN Explanatory Notes: Coach screws
Coach screws are a special kind of wood screw which differs from the latter because they have a hexagonal head or a square head and may have a fixed cap. There are two types of coach screws: — screws used to secure railway lines to sleepers of wood which are, in principle, large wood screws with a hexagonal or square unslotted head (see example A); — screws used for assembling rafters and for similar heavy woodwork which, in view of their use, have a diameter of the shank which is more than 5 mm (see example B). Example A Example B
7318 14 91 CN Explanatory Notes: Spaced-thread screws
This subheading covers hardened screws with head and fixing thread (V-thread) for driving into sheet metal. The thread, which is not metric, extends from the shank end to the head. The shank end is pointed or a journal. They typically have the following appearance:
7318 15 20 CN Explanatory Notes: For fixing railway track construction material
This subheading includes: 1. hook bolts which generally have a square or trapezoidal head, with or without a square neck, and which are used for metal sleepers; 2. fish bolts which generally have a square or round head and oval neck, and which are used to join rails to one another; 3. other bolts for fixing railway track construction material, which are generally supplied with nuts attached and which have a shank thickness not less than 18 mm.
7318 15 95 CN Explanatory Notes: Other
This subheading includes screws and bolts with square socket heads or square, octagonal or triangular heads, round-headed screws and bolts of various types, for example:
7318 16 92 CN Explanatory Notes: and 7318 16 99
Other, with an inside diameter The inside diameter must be measured at the root of the thread. The diameter of bolts, on the other hand, must be measured at the crest of the thread.
7318 16 99 CN Explanatory Notes: and 7318 16 99
Other, with an inside diameter The inside diameter must be measured at the root of the thread. The diameter of bolts, on the other hand, must be measured at the crest of the thread.
7318 15 35 - 7318 15 48 CN Explanatory Notes: to 7318 15 48
Without heads These subheadings include goods with internal or external drive/notch, for example, with six-point star-shaped drive, but not having a head protruding from a shank. These subheadings include goods which typically have the following appearance:
7318 15 52 - 7318 15 95 CN Explanatory Notes: to 7318 15 95
With heads These subheadings cover screws and bolts having a head protruding from a shank.
Notes to chapter 73
Notes 1. In this chapter, the expression ‘cast iron’ applies to products obtained by casting in which iron predominates by weight over each of the other elements and which do not comply with the chemical composition of steel as defined in note 1(d) to Chapter 72. 2. In this chapter, the word ‘wire’ means hot- or cold-formed products of any cross-sectional shape, of which no cross-sectional dimension exceeds 16 mm.
Sources: Combined Nomenclature 2026, Annex I to Regulation (EEC) No 2658/87 (CELEX 32025R1926), and the Explanatory Notes to the Combined Nomenclature (CELEX 02019XC0329(02)-20260213). The section and chapter notes are legally binding; the explanatory notes are guidance. EUR-Lex
EU classification regulations for 7318000000
Commission regulations that classified specific goods under this code. They bind customs in every member state for identical goods.
- 7318 12 10 Jun 11, 2013 · Regulation on EUR-Lex
A screw made of stainless steel, measuring approximately 2 cm.
The head of the screw comprises a recessed socket drive. The shank has a partial thread of a regular form. The pointed tip has a notch and it is not bifurcated. The article is designed for use in wood and wood panels. (*1) See image.
Reasons
Classification is determined by General Rules 1 and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 7318 , 7318 12 and 7318 12 10 . Given its characteristics (partially threaded shank, notch at the end of the pointed tip and no bifurcation), the article is specifically designed to bite its way into wood. The article is therefore considered to be a wood screw falling under subheading 7318 12 . The article is therefore to be classified under CN code 7318 12 10 as a wood screw of stainless steel.
- 7318 15 42 Jul 23, 2026 · Regulation on EUR-Lex
Galvanised threaded rods of steel other than stainless steel, with a metric thread along their entire length, without a head or recess, with a tensile strength of less than 800 MPa, in different lengths (between 1 000 and 3 000 mm) and diameters (between 4 and 36 mm).
They are presented without nuts, washers or similar elements. The articles are used for joining, suspending or fixing a wide range of equipment and components. See images. (*1)
Reasons
Classification is determined by general rules 1 and 6 for the interpretation of the Combined Nomenclature, Note 1 (d) to Chapter 72 and by the wording of CN codes 7318 , 7318 15 and 7318 15 42 . Since the article is threaded and used to assemble or fasten goods so that they can be readily disassembled without damage (see also the Harmonised System Explanatory Notes (HSEN) to heading 7318 (A), first paragraph), it has the objective characteristics of an article of subheading 7318 15 (screw studding; see also the HSEN to heading 7318 (A), third paragraph). Consequently, classification under CN code 7318 19 00 as other threaded articles is excluded. The articles are therefore to be classified under CN code7318 15 42 as other screws and bolts without heads, of steel other than stainless steel, with a tensile strength of less than 800 MPa.
- 7318 15 95 Jun 20, 2019 · Regulation on EUR-Lex
A self-clinching stud made of steel. It has a threaded shank and a round, flat and smooth head with underlying knurling. It can have different dimensions.
The article is designed to be mounted on low-thickness metal sheets by means of a hydraulic or pneumatic press. The head stays exactly on the level of the sheet while the threaded part remains perpendicular to the sheet. Consequently, it creates a male thread, which enables the sheet to be joined by means of an additional nut to another element which can be detached by screwing in a reversible way. (*1)See image.
Reasons
Classification is determined by general rules 1 and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 7318 , 7318 15 and 7318 15 95 . The article is threaded and used to assemble or fasten goods so that they can readily be disassembled without damage. It has the objective characteristics of a screw of heading 7318 . Consequently, classification under CN code 7318 19 00 as other threaded articles is excluded (see also the Harmonised System Explanatory Notes to Heading 7318 (A)). It is therefore to be classified under CN code 7318 15 95 as other screws of steel.
+ 3 more
- 7318 16 39 Apr 9, 2019 · Regulation on EUR-Lex
A threaded article made of stainless steel with an internal thread. It is in the form of a nut with a flange on one end.
The article is designed to be used in the pipeline assembly of the hydraulic braking system of a motor vehicle. The article, when tightened, causes the components of the connecting joint to settle into the correct position, thus securing the hydraulic seal. See images (*1).
Reasons
Classification is determined by general rules (GIR) 1 and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 7318 , 7318 16 and 7318 16 39 . The article has the objective characteristics of ‘threaded articles’ classified under heading 7318 . Classification under heading 7307 as tube or pipe fittings is excluded as the article only presses on the components that form the connection in the joint and is not in contact with the liquid transmitted via the pipeline. The inner thread of the article is not designed to form or maintain a hydraulic seal. The article cannot be classified as an unfinished fitting/coupling by virtue of GIR 2(a) for the interpretation of the Combined Nomenclature because it does not have the essential character of the finished fitting/coupling. Bolts, nuts, screws, etc. suitable for use in the assembly of tube or pipe fittings are excluded from heading 7307 (see also the Harmonized System Explanatory Notes to heading 7307 , exclusions, point (b)). Consequently, the article is to be classified under CN code 7318 16 39 as other nuts of stainless steel.
- 7318 19 00 Jun 12, 2014 · Regulation on EUR-Lex
A product of steel with a body which is partially threaded and partially lined with plastic. It has a slotted head with a cross slit. It is neither tapered nor pointed at the end. It has a length of approximately 45 mm and an external diameter of approximately 7 mm.
This product is designed to be a part of a mounting suitable for furniture. The threaded end of the product is to be screwed into a predrilled hole in one part of the furniture. The head is to be inserted into a predrilled hole in another part of the furniture. The two parts of the furniture are joined together by locking the head into the slot of the other part of the mounting (not included upon presentation). (*1) See the image.
Reasons
Classification is determined by general rules 1, 3(b) and 6 for the interpretation of the Combined Nomenclature, note 1 to Chapter 83 and by the wording of CN codes 7318 and 7318 19 00 . The product is composite goods consisting of two materials. It is to be classified according to the material which gives it its essential character (metal). Classification under heading 8302 as base metal mountings suitable for furniture is excluded as the product is just a part of the complete mounting and it has the characteristics of a threaded article of heading 7318 (see note 1 to Chapter 83). The product is not considered to be a screw of heading 7318 , as it does not on its own fasten or assemble goods. Only the threaded end is screwed, while the other end is locked into the slot of the other part of the mounting. Consequently, classification under CN codes 7318 12 , 7318 14 or 7318 15 is excluded. It is therefore to be classified under CN code 7318 19 00 as other threaded articles of steel.
- 7318 19 00 Jun 20, 2011 · Regulation on EUR-Lex
A product comprising a bolt with a washer, an expandable anchor sleeve and a nut, all made of stainless steel.
The bolt has a hexagonal head, is 55 mm long, threaded throughout and has a tensile strength of 490 MPa. The anchor sleeve is 42 mm long with an external diameter of 10 mm when not expanded. It is not threaded. The product is used for fixing articles to a hard substance, such as a concrete wall, by first inserting the anchor sleeve, with the nut inside, in a drilled hole and then inserting and fastening the bolt. As the bolt is fastened, the nut is drawn towards to head of the bolt, causing the anchor sleeve to expand, securing the article firmly to the hard substance.
Reasons
Classification is determined by General Rules (GIR) 1 and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 7318 and 7318 19 00 . The product is not composite goods within the meaning of GIR 3 (b) as the individual components together constitute a single product, an expansion bolt. Classification according to the component that gives the product its essential character is therefore excluded. Classification under subheading 7318 15 as a bolt, whether or not with its nuts and washers, is excluded, because the anchor sleeve is a product other than a nut or a washer. Given its characteristics, the product is therefore to be classified under CN code 7318 19 00 as other threaded articles.
UK advance tariff rulings for 7318000000
Rulings of HM Revenue & Customs for goods with UK commodity codes that start like this EU code. The UK tariff differs from the EU tariff, so these rulings are guidance for the EU.
- UK 7318121090 Valid Mar 22, 2024 to Mar 21, 2027 · Ruling 600010150 on GOV.UK
The coloured cladding screws are made from stainless steel. They are designed to be used with wood,plastic composite cladding. They are threaded with a torx head. The screw dimensions are 4mm x 35mm. Packaged in a box – each box contains 100 screws
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading 7318 - Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel GIR 5 (b) - has been used to identify the type of packaging - packaged in a cardboard box. GIR 6 - has been used to classify the goods to subheading level 731812 - Other Wood screws 8 Digit Code - 73181210 - Other wood screws - Of Stainless Steel 10 Digit Code - 7318121090 - Other than for use in certain types of aircraft. Also classified in accordance with: Note 3 to Section XV …
- UK 7318121090 Valid Mar 22, 2024 to Mar 21, 2027 · Ruling 600010151 on GOV.UK
Stainless steel screws that offer a secure solution to fixing wood, plastic composite decking boards. Ideal for fixing risers in steps and fixing the final board of your project. The decking screws come in 5 different colours to match your decking boards and guarantee a discreet fixing. Screw dimensions: 5mm x 50mm Each pack contains 100 screws and come packaged in a cardboard box.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading 7318 - Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel GIR 5 (b) - has been used to identify the type of packaging - packaged in a cardboard box. GIR 6 - has been used to classify the goods to subheading level 731812 - Other Wood screws 8 Digit Code - 73181210 - Other wood screws - Of Stainless Steel 10 Digit Code - 7318121090 - Other than for use in certain types of aircraft. Also classified in accordance with: Note 3 to Section XV …
- UK 7318121090 Valid Mar 22, 2024 to Mar 21, 2027 · Ruling 600010152 on GOV.UK
Stainless steel trim screws for fixing corner and skirting trims to decking. The screw is threaded and with a Torx head design. The Trim screws come in 5 different colours to match the decking and gives a secure and clean look when in place. Screw dimensions: 4mm x 35mm. Each pack contains 100 screws and come packaged in a cardboard box.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading 7318 - Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel GIR 5 (b) - has been used to identify the type of packaging - packaged in a cardboard box. GIR 6 - has been used to classify the goods to subheading level 731812 - Other Wood screws 8 Digit Code - 73181210 - Other wood screws - Of Stainless Steel 10 Digit Code - 7318121090 - Other than for use in certain types of aircraft. Also classified in accordance with: Note 3 to Section XV …
+ 18 more
- UK 7318149990 Valid Feb 17, 2025 to Feb 16, 2028 · Ruling 600012141 on GOV.UK
The product is a self-tapping threaded screw, material is steel cast zinc alloy finish with a self-drilling plug. The plug is to anchor to the plasterboard.
Justification
Classification has been determined in accordance with the following: - For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General Interpretative Rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading 7318 - Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel. GIR 3C - Has been used as it is considered there is no essential character and therefore it has been classified to last in numerical order within the tariff- namely the Steel screw. GIR 6 - has been used to classify the goods to subheading level 731814 - Threaded articles; Self-tapping screws. 8 digit code 73181499 - Other than of stainless steel; Other than spaced-thread screws. 10 digit …
- UK 7318149990 Valid Feb 17, 2025 to Feb 16, 2028 · Ruling 600012142 on GOV.UK
The product is a steel threaded self-tapping screw, with an additional plastic plug for plasterboard. The head of the screw is flat with cross-recess. The length of the screw is 35mm with a thickness of 4.5mm. Packaged for retail sale.
Justification
Classification has been determined in accordance with the following: - For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General Interpretative Rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading 7318 - Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel. GIR 3C - Has been used as it is considered there is no essential character and therefore has been classified to last in numerical order within the tariff- namely the Steel screw. GIR 6 - has been used to classify the goods to subheading level 731814 - Threaded articles; Self-tapping screws. 8 digit code 73181499 - Other than of stainless steel; Other than spaced-thread screws. 10 digit …
- UK 7318153590 Valid Jan 8, 2026 to Jan 7, 2029 · Ruling 600014337 on GOV.UK
A stainless-steel stud and pin used in construction. A central peg is inserted into a central longitudinal channel of a headless, threaded shank and when struck into the channel with a hammer, it forces stainless-steel quadrants cut into the end of an anchor to splay out. A stainless- steel nut is then tightened on to the top of the shank to secure the stud in place. The studs, together with the pin and bolt are packaged in cardboard boxes.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 7318 - Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel GIR 5 (b) - Has been used to identify the type of packaging. Carboard boxing GIR 6 - Has been used to classify the goods to subheading level 731815 - Other screws and bolts, whether or not with their nuts or washers 8 Digit Code 73181535 – other than elsewhere specified in this heading; without heads, of stainless steel 10 Digit Code 7318153590 – other than for use in certain types of …
- UK 7318154890 Valid May 17, 2024 to May 16, 2027 · Ruling 600010475 on GOV.UK
Flange Jointing – Stud Bolts and Nuts Studding Material Alloy steel to ASTM A 193 Grade B7 with nuts to ASTM A 194 Grade 2H Standard Supply Stud Bolt coating PTFE over a metallic substrate to provide both good corrosion resistance and low friction characteristics. Packaged- Cardboard Box ; Wooden Crate
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading – 7318 - Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel GIR 5 (b) - has been used to identify the type of packaging. GIR 6 - has been used to classify the goods to subheading level - 731815 – Threaded articles – other screws and bolts, whether or not with their nuts or washers 8 Digit code – 73181548 – Other, without heads - of 800 MPa or more 10 Digit code – 7318154890 – Other than for use in certain types of aircraft Also classified in …
- UK 7318154890 Valid Jan 27, 2026 to Jan 26, 2029 · Ruling 600014339 on GOV.UK
A carbon-steel stud and pin used in construction. A central peg is inserted into a central longitudinal channel of a headless, threaded shank and when struck into the channel with a hammer, it forces carbon-steel quadrants cut into the end of an anchor to splay out. A carbon-steel nut is then tightened on to the top of the shank to secure the stud in place. The studs, together with the pin and bolt are packaged in cardboard boxes.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 7318 - Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel GIR 5 (b) - Has been used to identify the type of packaging. Packaged in cardboard boxes GIR 6 - Has been used to classify the goods to subheading level 731815 - Other screws and bolts, whether or not with their nuts or washers 8 Digit Code 73181548 – other than elsewhere specified in this heading; without heads, other, with tensile strength of 800 mpa or more 10 Digit Code 7318154890 – other …
- UK 7318157590 Valid Jun 18, 2026 to Jun 17, 2029 · Ruling 600015618 on GOV.UK
Super Duplex Stainless Steel Fasteners Bolts Various size bolts that are high strength stainless steel fasteners manufactured at material grade S32760 and designed for use in harsh, corrosive environments They are hot forged and head formed under high pressure followed by machining. Commonly used in offshore energy applications, such as securing parts for offshore wind projects. Supplied in boxes
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIRs): GIR 1- Has been used to classify this product by the terms of heading – 7318 Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and other similar articles, of iron and steel. GIR 6 - has been used to classify the goods to subheading level 731815 Threaded articles : Other screws and bolts, whether or not with their nuts or washers. 8 Digit Code – 73181575 Other than for fixing railway track construction material; With heads; Hexagonal heads; of Stainless Steel. 10 Digit Code – 7318157590 Other than for use in civil aircraft. Also classified in accordance with: …
- UK 7318159589 Valid Jan 2, 2025 to Jan 1, 2028 · Ruling 600012053 on GOV.UK
Steel Lockbolt Pin and Collar The two part system comprises a pin with defined breakneck groove and a collar. Pin is inserted in the prepared hole and collar is placed over the locking grooves. Used as an secure vibration free locking fastener These can be used in securing car seats Manufactured from Steel using cold forging presses The pin goes through two pieces of material (metal) the collar is then slid over the pin and swaged into place making it fully secure and un moveable. It is packed in cardboard boxes for shipment.
Justification
For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading – 7318 Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and other similar articles, of iron and steel GIR 5 (b) has been used to identify the type of packaging. GIR 6 - has been used to classify the goods to subheading level 731815 – Other screws and bolts, whether or not with their nuts or washers Eight digit code – 73181595 Other than elsewhere specified in this heading Ten digit code – 7318159589 Other than for use in civil aircraft; Other than of stainless steel Also classified in accordance with: Chapter 83 Note 1 Section XV Note 2(a) Harmonised …
- UK 7318159589 Valid Jun 3, 2025 to Jun 2, 2028 · Ruling 600013112 on GOV.UK
A Seat button/knob. Made from 90% plastic (acrylonitrile butadiene styrene) and 10% metal (steel). The button has plastic top for turning and pulling up/pushing down, the metal part making the connection. Pulling up and turning the knob allows the seat to be adjusted and pushing down locks the seat in place. Used as a replacement part for stationary bike (exercise bike).
Justification
For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 7318 - Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and other similar articles, of iron and steel. GIR 6 has been used to classify the goods to subheading level 731815 - Threaded articles; other screws and bolts, whether or not with their nuts or washers. Eight digit code 73181595 - Other than for fixing railway track construction material specified in this heading; with heads; other than elsewhere specified. Ten digit code – 7318159589 Other than for use in civil aircraft; Other than of stainless steel. Also classified in accordance with: Section …
- UK 7318159589 Valid Jul 20, 2026 to Jul 19, 2029 · Ruling 600015864 on GOV.UK
This product is a threaded bolt that is made from steel, is 10mm in diameter and has a 20mm flat head but no screw fixing. This bolt is used to hold two parts of a pulley unit together.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect –a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIRs): GIR 1 - Has been used to classify this product by the terms of heading – 7318 Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and other similar articles, of iron and steel. GIR 6 - Has been used to classify the goods to subheading level 731815 – Other screws and bolts, whether or not with their nuts or washers. 8 Digit Code – 73181595 Other than elsewhere specified in this heading. 10 Digit Code – 7318159589 Other than for use in civil aircraft; Other than of stainless steel. Also classified in accordance with: Section notes 3 to section XV. Harmonised …
- UK 7318163990 Valid Feb 17, 2026 to Feb 16, 2029 · Ruling 600014972 on GOV.UK
A metal threaded nut. It is made from stainless steel castings 304/304L/316/316L, it is round in shape with grooves and is engraved. It is used to screw a connection union together in either a pipeline or into a machine. Normally packaged in boxes of 10.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 7318: Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel GIR 5 (b) has been used to identify the type of packaging: Normally packaged in boxes of 10 GIR 6 has been used to classify the goods to subheading 731816: Threaded articles; Nuts 8 Digit Code: 73181639 - Of stainless steel; Other than blind rivet nuts 10 Digit Code: 7318163990 - Other than for use in certain types of aircraft Also classified in accordance with: Harmonized System Explanatory …
- UK 7318163990 Valid Jun 18, 2026 to Jun 17, 2029 · Ruling 600015617 on GOV.UK
Super Duplex Stainless Steel Fasteners Nuts Various size nuts that are manufactured from S32760 high-strength stainless steel, these fasteners are designed for harsh, corrosive environments. They are formed hot or cold, with internal threads produced by tapping. Commonly used in offshore energy applications, such as securing parts for offshore wind projects. Supplied in boxes
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIRs): GIR 1 - Has been used to classify this product by the terms of heading 7318: Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel. GIR 5 (b) - Has been used to identify the type of packaging – Boxes. GIR 6 - Has been used to classify the goods to subheading 731816: Threaded articles; Nuts. 8 Digit Code 73181639 - Of stainless steel; Other than blind rivet nuts. 10 Digit Code 7318163990 - Other than for use in certain types of aircraft. Also classified in accordance with: Section Note XV Note 3. Harmonised System …
- UK 7318169290 Valid Jul 20, 2026 to Jul 19, 2029 · Ruling 600015860 on GOV.UK
A threaded nut made from steel. It is used on a tensioner pulley bearing. It is a fastener that keeps the pulley on the bracket with its mating bolt.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect –a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIRs): GIR 1 - Has been used to classify this product by the terms of heading 7318 - Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel. GIR 6 - Has been used to classify the goods to sub-heading 7318 16 – Nuts. 8 Digit Code - 73181692 Other than elsewhere specified in this subheading; with an inside diameter not exceeding 12mm. 10 Digit Code - 7318169290 Other than for use in certain types of aircraft. Also classified in accordance with: Section notes 3 to section XV. Harmonised System Explanatory Notes (HSEN) note (A) to Heading …
- UK 7318169990 Valid Oct 27, 2026 to Oct 26, 2029 · Ruling 600016097 on GOV.UK
A tapered, internally threaded fastening nut made from non-stainless steel, designed for use within a locomotive flexible drive coupling assembly during wheelset changes. The article is supplied separately as a replacement fastener and is identified within the complete coupling assembly as the green taper sleeve. It has a cylindrical upper section, a wider tapered base and an M18 internal screw thread running throughout the entire bore. The article has no self-locking mechanism, bearing surface, sensor or other functional feature beyond fastening.
Justification
Classification has been determined in accordance with the following: - For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 7318 - Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel. GIR 6 - Has been used to classify the goods to subheading level. 731816 - threaded articles; nuts. 8-digit code 73181699 - other than of stainless steel; other, with an inside diameter exceeding 12mm. 10-digit code 7318169990 - other than for use in certain types of aircraft. Also classified in accordance with: Section XV Note 2 (a). Section XV Note 3. Section XVII Note 2(b). Harmonized …
- UK 7318190090 Valid Feb 2, 2026 to Feb 1, 2029 · Ruling 600014681 on GOV.UK
Replacement M8 toggle for quick fit frames. Ideal for refurbishing frames where toggles have been damaged or lost. Attach metal sign faces quickly and easily with these toggle fittings. Made of Mild Steel and are used for Road Frame Signs Thread Size - M8 - 38mm thread length
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 Has been used to classify this product by the terms of heading 7318 - screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel GIR 6 - has been used to classify the goods to subheading level - 731819 - threaded articles; other than elsewhere specified within this subheading 10 Digit code - 7318190090 - other than for use in certain types of aircraft Also classified in accordance with: Section Note 3 to Section XV Harmonised System Explanatory Notes (HSENs) to heading 7318
- UK 7318220091 Valid Nov 27, 2025 to Nov 26, 2028 · Ruling 600013847 on GOV.UK
This product is pressed from Stainless Steel, and is used for packing to adjust the tail length of a clamp to meet differing beam flange thicknesses. The trader has confirmed it can be described as a clipped washer. It is not a spring washer or locked washer and is not for use with aircraft. Packaged into branded boxes in either 25 or 50 pieces per box depending on the size.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General Interpretative Rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 7318 - Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel GIR 5 (b) has been used to identify normal packaging for transport GIR 6 has been used to classify the goods to subheading level 731822 - Other washers 10 Digit Code 7318220091 - other than for use in certain types of aircraft - of stainless steel Also classified in accordance with : Harmonised System Explanatory Notes (HSENs) to heading 7318 Note (E)
- UK 7318220091 Valid Jun 18, 2026 to Jun 17, 2029 · Ruling 600015619 on GOV.UK
Super Duplex Stainless Steel Fasteners Washers These high-strength fasteners, made from S32760 stainless steel, are designed for harsh, corrosive environments. Stamped from plate or sheet metal, threads are cut, and components undergo heat treatment to restore corrosion resistance and duplex microstructure. Finishing steps include pickling and passivation. Each part is inspected for tensile strength, yield, and hardness. Used in the offshore energy industry to secure components. Supplied in boxes.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General Interpretative Rules (GIRs): GIR 1 Has been used to classify this product by the terms of heading 7318 - Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel. GIR 5 (b) Has been used to identify normal packaging for transport -Boxes. GIR 6 Has been used to classify the goods to subheading level 731822 - Other washers. 10 Digit Code 7318220091 - other than for use in certain types of aircraft - of stainless steel. Also classified in accordance with: Section Note XV Note 3. Harmonised System Explanatory Notes (HSENs) note (E) to heading 7318.
- UK 7318220098 Valid Oct 11, 2024 to Oct 10, 2027 · Ruling 600011259 on GOV.UK
Maintenance kit consisting of nylon D-Ring clip x 2, nylon insert lock nut that is made from nylon (polyamide, no metal is included) x 2, mild steel pozi drive pan head screw x 2, nylon insulation sleeve x 2, and mild steel flat washer x 4 which are not made in Malaysia. All placed in a clear plastic labelled bag. The kit is a field maintenance kit for this company's smoke sensitivity tester. This kit is just the parts in a plastic bag and then placed in a shipping carton. This ‘spares’ kit is merely a bunch of spare components that are commonly used on the main body/unit. The D clips are generic and all the components in the kit are not assembled together to form a new part.
Justification
Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 7318: Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel GIR 3C has been used as it is considered there is no essential character and therefore has been classified to last in numerical order within the Tariff GIR 5B - Has been used to identify the type of packaging; clear plastic labelled bag GIR 6 - Has been used to classify the goods to subheading level 731822: Non-threaded articles; Other washers 10 Digit code 7318220098: Other than for use in …
- UK 7318220098 Valid Jul 20, 2026 to Jul 19, 2029 · Ruling 600015863 on GOV.UK
This product is a washer that is made from a mild steel plate and is used in a pulley unit between the nut and the surface.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect –a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIRs): GIR 1 - Has been used to classify this product by the terms of heading 7318 - Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel. GIR 6 - Has been used to classify the goods to sub-heading – 731822 Other washers; Other than spring washers and other lock washers. 10 Digit Code – 7318220098 Other than consigned from Malaysia. Also classified in accordance with: Section notes 3 to section XV. Harmonised System Explanatory Notes (HSEN) note (E) to Heading 7318.
Source: HM Revenue & Customs, Advance Tariff Rulings. Contains public sector information licensed under the Open Government Licence v3.0.
Restrictions and flags for 7318000000
- CBAM: carbon border adjustment Regulation (EU) 2023/956, Annex I 7318
Sector: iron and steel
Read the act on EUR-Lex - Russia sanctions: import ban Regulation (EU) No 833/2014, Annex XVII 7318
Art. 3g, iron and steel products
Read the act on EUR-Lex - Russia sanctions: export ban Regulation (EU) No 833/2014, Annex XXIII 7318
Art. 3k, goods contributing to Russian industrial capacity
Read the act on EUR-Lex - Russia sanctions: export ban Regulation (EU) No 833/2014, Annex XXIII 7318
Art. 3k, goods contributing to Russian industrial capacity. only part of the code: Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including sp...
Read the act on EUR-Lex
For orientation only. Check the act before you rely on a flag; thresholds, derogations and exceptions are not shown in full.
Import VAT in the EU
- Austria 20 %
- Belgium 21 % maybe 6 %
- Bulgaria 20 %
- Croatia 25 %
- Cyprus 19 %
- Czechia 21 %
- Denmark 25 %
- Estonia 24 %
- Finland 25.5 %
- France 20 %
- Germany 19 %
- Greece 24 %
- Hungary 27 %
- Ireland 23 %
- Italy 22 %
- Latvia 21 %
- Lithuania 21 %
- Luxembourg 17 %
- Malta 18 %
- Netherlands 21 %
- Poland 23 %
- Portugal 23 %
- Romania 21 %
- Slovakia 23 %
- Slovenia 22 %
- Spain 21 %
- Sweden 25 %
Standard rate per member state, on the customs value, the duty and transport to the destination. Reduced rates often depend on the use or the buyer and apply only where the country provides them for these goods. Source: European Commission, Taxes in Europe Database, as of Nov 2, 2026.
Rules of origin
Preferential rules of origin for subheading 731800 depend on the trade agreement. The Commission publishes them in Access2Markets.
Rules of origin on Access2MarketsInformation
When importing or exporting "Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel", it is crucial to have the correct HS code or TARIC code. The HS code 7318000000 80 serves as the standard code for this product, ensuring that the appropriate duties and taxes are applied when crossing international borders.
To ensure your business transactions run smoothly when importing or exporting "Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel", consider the following points:
- Inform yourself about the specific import and export regulations in the countries involved. This includes possible restrictions, taxes, and duties applicable to "Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel".
- Check if any additional licenses, permits, or certificates are required to import "Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel" into the destination country or export it from the country of origin.
- Make sure your trading partners have valid identification numbers, such as EORI numbers (Economic Operators Registration and Identification) in the EU, to streamline trade and minimize delays.
- Ensure that all trade- and customs-related documents (such as commercial invoices, packing lists, certificates of origin, and insurance policies) are accurately completed and adhere to the respective national regulations.
- Keep an eye on the current exchange rates, as well as packaging, shipping, and insurance costs, to accurately calculate trade costs.
In summary, the HS code or TARIC code for "Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel" is 7318000000 80. Make sure you accurately use this code in all your trade and customs documents to guarantee smooth and hassle-free transactions. With these tips, you'll be better prepared for the challenges of international trade and can successfully import and export "Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel".
HS Code structure
1. Chapter
There are 21 different sections, which are divided into 96 chapters. Exceptional chapters include chapter 77, which is reserved for future use, chapters 98 and 99, which are limited at national level, and chapter 99, which is a specific code for temporary changes. In the example above, chapter 73 was selected for articles of iron or steel
2. Heading
The heading determines the specific category within a certain chapter. In the example above, the 18 refers to Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel.
HS Code tree structure
7300000000 80
Chapter ARTICLES OF IRON OR STEEL
7318000000 80
Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel
7318110000 10
- Threaded articles
7318110000 80
- - Coach screws
7318120000 80
- - Other wood screws
7318121000 80
- - - Of stainless steel
7318121010 80
- - - - For use in certain types of aircraft
7318121090 80
- - - - Other
7318129000 80
- - - Other
7318129010 80
- - - - For use in certain types of aircraft
7318129090 80
- - - - Other
7318130000 80
- - Screw hooks and screw rings
7318130010 80
- - - For use in certain types of aircraft
7318130090 80
- - - Other
7318140000 80
- - Self-tapping screws
7318141000 80
- - - Of stainless steel
7318141010 80
- - - - For use in certain types of aircraft
7318141090 80
- - - - Other
7318149100 10
- - - Other
7318149100 80
- - - - Spaced-thread screws
7318149110 80
- - - - - For use in certain types of aircraft
7318149190 80
- - - - - Other
7318149900 80
- - - - Other
7318149910 80
- - - - - For use in certain types of aircraft
7318149990 80
- - - - - Other
7318150000 80
- - Other screws and bolts, whether or not with their nuts or washers
7318152000 80
- - - For fixing railway track construction material
7318153500 10
- - - Other
7318153500 20
- - - - Without heads
7318153500 80
- - - - - Of stainless steel
7318153510 80
- - - - - - For use in certain types of aircraft
7318153590 80
- - - - - - Other
7318154200 10
- - - - - Other, with a tensile strength
7318154200 80
- - - - - - Of less than 800 MPa
7318154210 80
- - - - - - - For use in certain types of aircraft
7318154290 80
- - - - - - - Other
7318154800 80
- - - - - - Of 800 MPa or more
7318154810 80
- - - - - - - For use in certain types of aircraft
7318154890 80
- - - - - - - Other
7318155200 10
- - - - With heads
7318155200 20
- - - - - Slotted or cross-recessed heads
7318155200 80
- - - - - - Of stainless steel
7318155210 80
- - - - - - - For use in certain types of aircraft
7318155290 80
- - - - - - - Other
7318155800 80
- - - - - - Other
7318155810 80
- - - - - - - Self-locking bolts and nuts (of the type Hi-Lok)
7318155860 10
- - - - - - - Other
7318155860 80
- - - - - - - - For use in certain types of aircraft
7318155890 80
- - - - - - - - Other
7318156200 10
- - - - - Hexagonal-socket heads
7318156200 80
- - - - - - Of stainless steel
7318156210 80
- - - - - - - For use in certain types of aircraft
7318156290 80
- - - - - - - Other
7318156800 80
- - - - - - Other
7318156810 80
- - - - - - - Self-locking bolts and nuts (of the type Hi-Lok)
7318156860 10
- - - - - - - Other
7318156860 80
- - - - - - - - For use in certain types of aircraft
7318156890 80
- - - - - - - - Other
7318157500 10
- - - - - Hexagonal heads
7318157500 80
- - - - - - Of stainless steel
7318157510 80
- - - - - - - For use in certain types of aircraft
7318157590 80
- - - - - - - Other
7318158200 10
- - - - - - Other, with a tensile strength
7318158200 80
- - - - - - - Of less than 800 MPa
7318158210 80
- - - - - - - - Self-locking bolts and nuts (of the type Hi-Lok)
7318158260 10
- - - - - - - - Other
7318158260 80
- - - - - - - - - For use in certain types of aircraft
7318158290 80
- - - - - - - - - Other
7318158800 80
- - - - - - - Of 800 MPa or more
7318158860 80
- - - - - - - - For use in certain types of aircraft
7318158880 80
- - - - - - - - Other
7318159500 80
- - - - - Other
7318159511 10
- - - - - - For use in certain types of aircraft
7318159511 80
- - - - - - - Of stainless steel
7318159519 80
- - - - - - - Other
7318159585 10
- - - - - - Other
7318159585 80
- - - - - - - Of stainless steel
7318159589 80
- - - - - - - Other
7318160000 80
- - Nuts
7318163100 10
- - - Of stainless steel
7318163100 80
- - - - Blind rivet nuts
7318163110 80
- - - - - For use in certain types of aircraft
7318163190 80
- - - - - Other
7318163900 80
- - - - Other
7318163910 80
- - - - - For use in certain types of aircraft
7318163990 80
- - - - - Other
7318164000 10
- - - Other
7318164000 80
- - - - Blind rivet nuts
7318164010 80
- - - - - For use in certain types of aircraft
7318164090 80
- - - - - Other
7318166000 80
- - - - Self-locking nuts
7318166010 80
- - - - - For use in certain types of aircraft
7318166090 80
- - - - - Other
7318169200 10
- - - - Other, with an inside diameter
7318169200 80
- - - - - Not exceeding 12 mm
7318169210 80
- - - - - - For use in certain types of aircraft
7318169290 80
- - - - - - Other
7318169900 80
- - - - - Exceeding 12 mm
7318169920 80
- - - - - - For use in certain types of aircraft
7318169990 80
- - - - - - Other
7318190000 80
- - Other
7318190020 80
- - - For use in certain types of aircraft
7318190090 80
- - - Other
7318210000 10
- Non-threaded articles
7318210000 80
- - Spring washers and other lock washers
7318210021 10
- - - For use in certain types of aircraft
7318210021 80
- - - - Of stainless steel
7318210031 10
- - - - Other
7318210031 80
- - - - - Consigned from Malaysia
7318210039 80
- - - - - Other
7318210091 10
- - - Other
7318210091 80
- - - - Of stainless steel
7318210095 10
- - - - Other
7318210095 80
- - - - - Consigned from Malaysia
7318210098 80
- - - - - Other
7318220000 80
- - Other washers
7318220021 10
- - - For use in certain types of aircraft
7318220021 80
- - - - Of stainless steel
7318220039 80
- - - - Other
7318220091 10
- - - Other
7318220091 80
- - - - Of stainless steel
7318220098 80
- - - - Other
7318230000 80
- - Rivets
7318230020 80
- - - For use in certain types of aircraft
7318230090 80
- - - Other
7318240000 80
- - Cotters and cotter pins
7318240020 80
- - - For use in certain types of aircraft
7318240040 80
- - - Tube or pipe restraint joint elements: -of stainless steel according to specification 17-4PH or of steel according to specification tool steel S7, -produced by metal injection moulding, -with a rockwell hardness of 38 HRC (± 1) or 53 HRC (+ 2/- 1), -measuring 7 mm x 4 mm x 5 mm or more, but not more than 40 mm x 20 mm x 10 mm
7318240090 80
- - - Other
7318290000 80
- - Other
7318290020 80
- - - For use in certain types of aircraft
7318290090 80
- - - Other