New Describe a product, get the CN code. Also as API and MCP for AI agents. Try it free
Jump to content

Tariff number 7326000000 80 - Other articles of iron or steel

Email me changes

Import trade restrictions for 7326000000 80

This table contains information on trade restrictions for the import of goods into the EU and the EU into third countries. The table contains information on trade restrictions which are imposed due to customs unions, preferences, tariff quotas, customs unions, veterinary controls, third country duties and non-preferential tariff quotas.

Duties 65
CH
Switzerland CH
01-01-1995
0 %
Tariff preference 142
FO
Faroe Islands FO
01-01-1997
0 %
Tariff preference 142
SM
San Marino SM
01-01-2006
0 %
Customs union duty 106
1007
EU-Switzerland agreement: re-imported goods 1007
01-01-2007
0 %
Tariff preference 142
BA
Bosnia and Herzegovina BA
01-01-2009
0 %
Tariff preference 142
MK
North Macedonia MK
01-01-2009
0 %
Tariff preference 142
UA
Ukraine UA
01-01-2016
0 %
Tariff preference 142
2020
GSP - General arrangements 2020
01-01-2017
0 %
Tariff preference 142
EC
Ecuador EC
01-01-2017
0 %
Tariff preference 142
2080
OCTs (Overseas Countries and Territories) 2080
01-01-2021
0 %
Tariff preference 142
XS
Serbia XS
01-02-2010
0 %
Tariff preference 142
JP
Japan JP
01-02-2020
0 %
Tariff preference 142
PE
Peru PE
01-03-2013
0 %
Tariff preference 142
AL
Albania AL
01-04-2009
0 %
Tariff preference 142
XK
Kosovo XK
01-04-2016
0 %
Tariff preference 142
ME
Montenegro ME
01-05-2010
0 %
Tariff preference 142
NZ
New Zealand NZ
01-05-2024
0 %
Tariff preference 142
SY
Syria SY
01-08-1994
0 %
Tariff preference 142
VN
Viet Nam VN
01-08-2020
0 %
Tariff preference 142
GE
Georgia GE
01-09-2014
0 %
Tariff preference 142
1011
ERGA OMNES 1011
01-11-2018
0 %
Airworthiness tariff suspension 119
1011
ERGA OMNES 1011
01-11-2026
3 EUR
Low-value consignment customs duty 107
ZA
South Africa ZA
10-10-2016
0 %
Tariff preference 142
AM
Armenia AM
10-10-2026
– 11-10-2028
0 %
Tariff preference 142
1006
EU-Canada agreement: re-imported goods 1006
21-09-2017
0 %
Tariff preference 142
CA
Canada CA
21-09-2017
0 %
Tariff preference 142
AD
Andorra AD
01-01-2006
0 %
Customs union duty 106
2005
GSP-EBA (Special arrangement for the least-developed countries - Everything But Arms) 2005
01-01-2014
0 %
Tariff preference 142
2027
GSP+ (incentive arrangement for sustainable development and good governance) 2027
01-01-2014
0 %
Tariff preference 142
MD
Moldova, Republic of MD
01-01-2016
0 %
Tariff preference 142
GB
United Kingdom GB
01-01-2021
0 %
Tariff preference 142
GH
Ghana GH
01-01-2027
0 %
Tariff preference 142
SG
Singapore SG
01-01-2027
0 %
Tariff preference 142
CL
Chile CL
01-02-2025
0 %
Tariff preference 142
TN
Tunisia TN
01-03-1998
0 %
Tariff preference 142
MA
Morocco MA
01-03-2000
0 %
Tariff preference 142
LB
Lebanon LB
01-04-2006
0 %
Tariff preference 142
JO
Jordan JO
01-05-2002
0 %
Tariff preference 142
EG
Egypt EG
01-06-2004
0 %
Tariff preference 142
2012
EEA - European Economic Area 2012
01-07-2007
0 %
Tariff preference 142
KR
Korea, Republic of (South Korea) KR
01-07-2011
0 %
Tariff preference 142
MX
Mexico MX
01-07-2016
0 %
Tariff preference 142
KE
Kenya KE
01-07-2024
0 %
Tariff preference 142
US
United States US
01-07-2026
0 %
Tariff preference 142
2200
Central America 2200
01-08-2013
0 %
Tariff preference 142
CO
Colombia CO
01-08-2013
0 %
Tariff preference 142
DZ
Algeria DZ
01-09-2005
0 %
Tariff preference 142
1011
ERGA OMNES 1011
01-11-2026
2 EUR
Union handling fee 800
CI
Ivory Coast CI
02-12-2019
0 %
Tariff preference 142
2000
Preferential origin in accordance with the Agreement in the form of an Exchange of Letters between the European Union and the Kingdom of Morocco on the amendment of Protocols 1 and 4 to the Euro-Mediterranean Agreement establishing an association between the European Communities and their Member States, of the one part, and the Kingdom of Morocco, of the other part. 2000
03-10-2025
0 %
Tariff preference 142
CM
Cameroon CM
04-08-2014
0 %
Tariff preference 142
BY
Belarus BY
05-06-2022
Import prohibition 277
XL
Melilla XL
07-12-2003
0 %
Accession act0001/85
Tariff preference 142
XC
Ceuta XC
07-12-2003
0 %
Accession act0001/85
Tariff preference 142
PS
Occupied palestinian Territory PS
07-12-2003
0 %
Tariff preference 142
1035
SADC EPA 1035
10-10-2016
0 %
Tariff preference 142
1034
Eastern and Southern Africa States 1034
14-05-2012
0 %
Tariff preference 142
GH
Ghana GH
15-12-2016
– 31-12-2026
0 %
Tariff preference 142
IL
Israel IL
16-05-2023
0 %
Tariff preference 142
SB
Solomon Islands SB
17-05-2020
0 %
Tariff preference 142
PG
Papua New Guinea PG
20-12-2009
0 %
Tariff preference 142
SG
Singapore SG
21-11-2019
– 31-12-2026
0 %
Tariff preference 142
FJ
Fiji FJ
28-07-2014
0 %
Tariff preference 142
1033
CARIFORUM 1033
29-12-2008
0 %
Tariff preference 142
WS
Samoa WS
31-12-2018
0 %
Tariff preference 142
Controls and documents 5
1008
All third countries 1008
01-01-2026
– 31-12-2026
Document required
banned without it
Carbon Border Adjustment Mechanism - CBAM 775
RU
Russian Federation RU
19-12-2023
– 31-12-2027
Document required
banned without it
Import control 763
1008
All third countries 1008
19-12-2023
– 31-12-2027
Document required
banned without it
Import control 763
UA
Ukraine UA
24-06-2026
Document required
banned without it
Import control 762
UA
Ukraine UA
24-06-2026
Document required
banned without it
Import control 760

Explanation of trade restrictions

Erga Omnes means "for all".

Third countries are countries that are not part of the EU.

GSP means "Generalised System of Preferences".

GSP Plus means "Generalised System of Preferences Plus".

European Economic Area (EEA) means all EU member states and Iceland, Liechtenstein and Norway.

OCTs stands for "Overseas Countries and Territories". They are countries and territories that are not part of the EU. More information

CARIFORUM is a regional economic integration organisation comprising 15 Caribbean Community (CARICOM) countries and the Dominican Republic.

SADC EPA stands for "Southern African Development Community - Economic Partnership Agreement".

Duty means "customs duties".

Estimate the import cost for 7326000000

  • Customs value €1,000.00
  • No third-country duty is recorded for this origin.
  • Import VAT 19 % €190.00
  • Total €1,190.00

May be lower under conditions:

  • Airworthiness tariff suspension: 0 %

Documents and checks for China

An estimate only. The customs value is the price including transport and insurance to the EU border. Excise duties, other fees and producer-specific anti-dumping rates are not included. Preferential rates need valid proof of origin. Country groups and exclusions: TARIC, as of November 2026.

Export measures for 7326000000

What applies when these goods leave the EU: export controls, dual-use and other authorisations, bans per destination and the supplementary unit of the export declaration.

Measures 1
KP
North Korea (Democratic People’s Republic of Korea) KP
28-02-2018
Export prohibition 278
Controls and documents 2
UA
Ukraine UA
25-02-2025
Document required
banned without it
Export control 709
UA
Ukraine UA
25-08-2022
Document required
banned without it
Export control 767

History

Duty rates and measures for this code over time (yearly snapshots).

Preferential rules of origin for 7326000000

What the goods must meet to count as originating in a partner country and get the preferential duty, per agreement.

  • Autonomous Trade Preferences (Western Balkans) · Kosovo

    EU-Chile Association Agreement · Chile

    EU-Algeria Association Agreement · Algeria

    EEA/EFTA agreements (Switzerland, Norway, Liechtenstein, Faroe Islands) · Faroe Islands, Liechtenstein, Norway, Switzerland

    EU-Egypt Association Agreement · Egypt

    EU-Georgia DCFTA · Georgia

    Generalised Scheme of Preferences (GSP, GSP+, EBA) · Armenia, India, Kenya, Pakistan, Samoa, Solomon Islands, Syria, Vietnam

    EU-Iceland FTA · Iceland

    EU-Jordan Association Agreement · Jordan

    EU-Jordan Association Agreement (relaxed rules, 2016) · Jordan

    EU-Korea FTA · South Korea

    EU-Central America Association Agreement

    EU-Lebanon Association Agreement · Lebanon

    EU-Morocco Association Agreement · Morocco

    EU-Moldova DCFTA · Moldova

    Pan-Euro-Mediterranean (PEM) Convention · Albania, Andorra, Bosnia & Herzegovina, Egypt, Faroe Islands, Iceland, Kosovo, Liechtenstein, Montenegro, North Macedonia, Norway, Palestine, Switzerland, Türkiye

    EU-Singapore FTA · Singapore

    EU-Tunisia Association Agreement · Tunisia

    EU-Ukraine DCFTA · Ukraine

    Articles of iron or steel; except for: / or: Manufacture from materials of any heading, except that of the product

  • EPA CARIFORUM

    EU Market Access Regulation (EPA) · Cameroon, Côte d’Ivoire, Ghana, Kenya

    EPA Pacific · Fiji, Papua New Guinea, Samoa, Solomon Islands

    EU-Mexico Global Agreement · Mexico

    EU-Palestine Interim Association Agreement · Palestine

    EPA SADC · South Africa

    Articles of iron or steel; except for: / or: Manufacture in which all the materials used are classified within a heading other than that of the product

  • EU-Canada CETA · Canada

    A change from any other heading.

  • EU-Colombia/Peru/Ecuador Trade Agreement · Colombia, Ecuador, Peru

    Articles of iron or steel; except for: / or: Manufacture from materials of any heading, except that of the product [95]

  • EPA Eastern and Southern Africa

    Sheet piling / or: Manufacture from materials of heading No 7206

  • EU-Japan EPA · Japan

    CTH

  • EU-Viet Nam FTA · Vietnam

    Articles of iron or steel; except for: / or: Manufacture from materials of any heading, except that of the product.

Source: European Commission, Access2Markets (CC BY 4.0, shortened). The text of the agreement prevails. Access2Markets

Legal and explanatory notes for 7326000000

7326 20 00 CN Explanatory Notes: Articles of iron or steel wire

This subheading includes products consisting of one or more steel wires sandwiched between two strips of paper or plastic, not cut to length. These goods are generally supplied on spools for use with automatic bag-closing machines. When cut into short lengths (suitable for sealing bags, sachets, etc.), these products are classified in heading 8309 (see the HS Explanatory Note to heading 8309, second paragraph, (9)).

Notes to chapter 73

Notes 1. In this chapter, the expression ‘cast iron’ applies to products obtained by casting in which iron predominates by weight over each of the other elements and which do not comply with the chemical composition of steel as defined in note 1(d) to Chapter 72. 2. In this chapter, the word ‘wire’ means hot- or cold-formed products of any cross-sectional shape, of which no cross-sectional dimension exceeds 16 mm.

Sources: Combined Nomenclature 2026, Annex I to Regulation (EEC) No 2658/87 (CELEX 32025R1926), and the Explanatory Notes to the Combined Nomenclature (CELEX 02019XC0329(02)-20260213). The section and chapter notes are legally binding; the explanatory notes are guidance. EUR-Lex

EU classification regulations for 7326000000

Commission regulations that classified specific goods under this code. They bind customs in every member state for identical goods.

  • 7326 20 00 Nov 18, 2025 · Regulation on EUR-Lex
    A specially shaped bracket, made of heat-resistant, stainless-steel wire, used as a retainer for the heating element of an electric grill. The heat-resistant wire can resist heat up to 800 °C.

    The article has specific dimensions to fit in a specific type of grill apparatus and has bent ends, so that the bracket can be fixed in a hole at the bottom of the grill housing (bowl). Its ends are bent to allow secured fixing of the bracket in a designated hole at the base of the grill. The retainer is designed to keep the heating element in the appropriate position, by supporting its weight and by firmly holding it in place. The article does not perform any additional function (e.g. heating). See images (*1).

    Reasons

    Classification is determined by general rules 1 and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 7326 and 7326 20 00. The article is an important component of the electric grill. It is intended to support and hold the heating element in place, thereby ensuring consistent and even heat distribution across the cooking surface/grate, reducing the risk of electrical hazards and extending the lifespan of both the heating element and the grill. Nevertheless, based on its objective characteristics, the article is not identifiable as being a part suitable for use solely or principally with electrothermic appliances of heading 8516. Classification under heading 8516, as a part of the electric grill is therefore excluded. (See also the judgment of the Court of Justice of the European Union of 19 July 2012 in Case C-336/11, Rohm & Haas Electronic Materials CMP Europe GmbH and Others, ECLI:EU:C:2012:500, paragraphs 34 and 35.) Consequently, the steel bracket is to be classified according to its constituent material, under heading 7326, as other article of iron or steel. The product is therefore to be classified under CN code 7326 20 00, as an article of iron or steel wire.

  • 7326 20 00 Nov 30, 2017 · Regulation on EUR-Lex
    An article (so-called ‘guy grip dead end’) made of 6 wires, each having a thickness of 3,25 mm.

    The wires are of galvanised cold drawn carbon steel. The wires run parallel to each other and are covered by a zinc coating. They are loosely twisted throughout their length and are bent to form a ‘U’ shape. After presentation, the article is used as ‘guying’ for wooden telegraph poles i.e. the wire is closely twisted together to become stranded wire. (See images) (*1)

    Reasons

    Classification is determined by general rules 1 and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 7326 and 7326 20 00 . Classification under heading 7312 as stranded wire, ropes, cables, plaited bands, slings and the like is excluded because the article is not closely twisted (see also Harmonized System Explanatory Notes to heading 7312 , first paragraph and the Explanatory notes to the Combined Nomenclature to subheadings 7312 10 61 to 7312 10 69 ). It only becomes closely twisted when mounted on the telegraph pole. The article is therefore to be classified under CN code 7326 20 00 as other articles of iron and steel wire.

  • 7326 90 98 Apr 19, 2016 · Regulation on EUR-Lex
    An article (so-called ‘hobby greenhouse’), measuring approximately 140 × 140 × 200 cm, comprising a frame made of steel. The frame also contains racks consisting of eight shelves, four on both sides, made of metal wire, measuring approximately 58 × 28 cm. The frame is covered on all sides by a flexible plastic sheeting with a rolling opening in the front measuring approximately 86 × 145 cm. The opening can be closed by a ‘Velcro’ fastening. The structure can be entered by a person. Its purpose is long or short term (for example, on markets) storage of plants.

    See image (*1)

    Reasons

    Classification is determined by general rules 1, 3(b) and 6 for the interpretation of the Combined Nomenclature, and by the wording of CN codes 7326 , 7326 90 and 7326 90 98 . Classification under heading 9403 as ‘other furniture’ is excluded because the article is not to be used for equipping private dwellings, hotels, offices, schools, churches, shops, laboratories and the like, but it is used for storing plants (see also the Harmonised System Explanatory Notes to Chapter 94, General, second paragraph, (A), and to heading 9403 , second paragraph). Classification under heading 9406 as a ‘prefabricated building’ is also excluded, as the construction is relatively unstable, with flexible walls. Consequently, it is not suitable for long term outdoor use as it is not considered to be weatherproof. The article is therefore classified according to its constituent material. The essential character of the article is given by the constructive element (metal frame and shelves). It is therefore to be classified under CN code 7326 90 98 as other articles of iron and steel.

+ 5 more
  • 7326 90 98 Jul 10, 2014 · Regulation on EUR-Lex
    A box of steel with dimensions of approximately 22,5 × 16,5 × 5,5 cm, with a wall thickness of more than 0,5 mm and of a capacity of less than 50 l. The box has a lid that is fixed to it by means of hinges and a closing system on the other side of the hinges. On the side of the closing system the box has a handle.

    There are relief-like images of biscuits and cartoon animals on the lid and the bottom of the box. The box has no internal fitting. See photographs A and B (*1).

    Reasons

    Classification is determined by general rules 1 and 6 for the interpretation of the Combined Nomenclature and by the wording of CN code 7326 , 7326 90 and 7326 90 98 . Given its objective characteristics, including its plain interior and small size, the product is not considered to be a suitcase, an executive-case or a briefcase of heading 4202 . The product is not specially shaped or internally fitted to contain particular tools with or without their accessories (see also the Harmonised System Explanatory Notes (HSEN) to heading 4202 , third paragraph). Classification under heading 4202 is therefore excluded. Because of its objective characteristics, namely the absence of any elements allowing to identify it as an adequate sales packing for specific consumer goods, classification of the product as a box under heading 7310 is also excluded (see also the HSEN to heading 7310 , second paragraph). The product is therefore to be classified under CN code 7326 90 98 as other articles of iron and steel.

  • 7326 90 98 Jul 25, 2013 · Regulation on EUR-Lex
    A castor consisting of:

    — a rectangular stainless steel plate with dimensions of approximately 14 × 10 cm with 4 screw holes, — a fork-shaped stainless steel housing with a swivel bearing that rotates through 360°, — a rubber tyre with a diameter of approximately 13 cm and a width of approximately 4 cm, — a plastic rim with a bearing. The castor can be mounted on various articles, such as trolleys, hospital beds and other furniture. (*1) see image

    Reasons

    Classification is determined by General Rules 1, 3(b) and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 7326 , 7326 90 and 7326 90 98 . Classification under heading 8302 is excluded as that heading only covers castors with a diameter not exceeding 75 mm or a width not exceeding 30 mm (see Note 2 to Chapter 83). The intended principal use of the castor is not inherent to its objective characteristics, as it is equally suitable for goods of, for example, heading 8716 (trolleys), heading 9402 (hospital beds) or heading 9403 (other furniture). Classification as a part of a specific article is therefore excluded. The castor is composite goods consisting of different materials (stainless steel, rubber and plastic). The component that gives the castor its essential character is the housing of stainless steel, as it is the basis for the structure of the castor. The castor is therefore to be classified under CN code 7326 90 98 as other articles of iron or steel.

  • 7326 90 98 Mar 19, 2013 · Regulation on EUR-Lex
    A box measuring approximately 33 × 10 × 10 cm, made of metal sheeting with a thickness of approximately 0,2 mm.

    The outside of the box bears a brand logo and name. Inside the box there is an easily detachable plastic inlay specially shaped to accommodate a bottle. The box is designed to be used as a package for a bottle of wine. The box is presented without the bottle.

    Reasons

    Classification is determined by General Rules 1 and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 7326 , 7326 90 and 7326 90 98 . Given its characteristics the product is a metal gift box with a detachable inlay. Heading 4202 covers products of a different nature suitable for long term use (such as binocular cases, musical instrument cases, gun cases and similar containers) specially shaped or internally fitted to contain particular tools with or without their accessories. The product is not similar to cases and containers of heading 4202 (see also the HS Explanatory Notes to heading 4202 ). Classification under heading 4202 as cases and similar containers is therefore excluded. Classification under heading 7310 as boxes or similar containers is also excluded as the product is neither a larger container used for commercial conveyance and packing of goods or a smaller container mainly used as sales packings for butter, beer, biscuits, etc. Heading 7310 covers products used as transport and sale containers for goods, whereas the product is a gift box holding a bottle and enhancing its appearance, while the bottle itself contains the liquid (see also the HS Explanatory Notes to heading 7310 ). Classification under heading 7323 as table, kitchen or other household articles is also excluded as the product is not an article used for kitchen or table or other household purposes but is a metal gift box of limited use (see also the HS Explanatory Notes to heading 7323 ). The product is therefore to be classified under CN code 7326 90 98 as other articles of iron or steel.

  • 7326 90 98 Nov 23, 2012 · Regulation on EUR-Lex
    A galvanised article consisting of a steel U-shaped bolt threaded at both ends, two hexagon nuts and a cast steel clamp with two holes for the passage of the bolt.

    The article is used for holding, for example, two or more wires together by placing the wires in the U-bolt, fitting the clamp over the wires and tightening the nuts. (*1) See image.

    Reasons

    Classification is determined by General Rules 1 and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 7326 , 7326 90 and 7326 90 98 . As the function of the article consisting of a bolt, two nuts and a clamp is different from that of a bolt, that is, it does not tighten and loosen together directly different elements, classification under heading 7318 as a bolt or similar article is excluded (see also the HS Explanatory Notes to heading 7326 , point (1)). The article is therefore to be classified under CN code 7326 90 98 as other articles of steel.

  • 7326 90 98 Aug 11, 2010 · Regulation on EUR-Lex
    A product in the form of a steel disc, cut from a flat hot-rolled plate, with a diameter of approximately 187 cm and a thickness of approximately 1,5 cm, with a stamped small hole and larger oval-shaped hole.

    After presentation, it is to be further processed (milling and drilling of additional holes, mounting of a steel rim and a surface treatment and coating) prior to being used. It is to be used together with a similar disc of a thickness of approximately 2,5 cm to connect one blade to the blade bearing in the nacelle of a so-called ‘wind turbine’ (a wind engine integrated with a generator). See image (*1).

    Reasons

    Classification is determined by General Rules 1 and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 7326 , 7326 90 and 7326 90 98 . Classification under heading 7308 as a part of a structure or under Section XVI as a part of a machine is excluded because, as presented, the product cannot be identified as a ‘part’ given that it requires further processing. It is therefore to be classified according to its constituent material under CN code 7326 90 98 as other articles of steel.

UK advance tariff rulings for 7326000000

Rulings of HM Revenue & Customs for goods with UK commodity codes that start like this EU code. The UK tariff differs from the EU tariff, so these rulings are guidance for the EU.

  • UK 7326199000 Valid Jul 2, 2025 to Jul 1, 2028 · Ruling 600013210 on GOV.UK

    This product is a metal hemisphere that will be used to make a ladle for the process of pouring molten aluminium into a diecast. It is made from standard mild steel, that is pressed from a flat piece into a hemisphere shape (bowl shape). The product will be packaged in crates prior to shipping.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify the product to heading 7326 - Other articles of iron or steel GIR 5b has been used to identify the type of packaging (Crates) GIR 6 has been used to classify the goods to subheading level 732619 - Forged or stamped, but not further worked; Other Eight digit code 73261990 - Other than open-die forged Also classified in accordance with: Note 3 to Section XV Harmonised System Explanatory Notes (HSENs) to heading 7326

  • UK 7326200090 Valid Sep 2, 2024 to Sep 1, 2027 · Ruling 600011150 on GOV.UK

    Sure-Set Rat Trap The trap is made of plastic but contained inside it is a stainless steel spring which forces the trap shut when bait holder is disturbed Designed to provide a quick, powerful and humane killing action, with a one-click setting and release mechanism, the hygienic plastic rat trap is ideal for domestic users. One click set and release mechanism Very easy to use – perfect for the domestic user Bait well eliminates chance of bait theft No touch disposal – easy to release, clean and reuse Quick, powerful and humane killing action Dimensions (mm): 210 (H) x 125 (W) x 80 (D)

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules GIR’s: Gir 1 - Has been used to classify this product by the terms of heading 7326 - Other articles of iron or steel Gir 3b - Has been used as the iron wire is the essential character Gir 6 - Has been used to classify this product by the terms of heading 732620 - Articles of iron or steel wire 10 Digit Code 7326200090 - Other than for use in civil aircraft or other than Metal fleece, consisting of a mass of stainless steel wires of diameters of 0.001 mm or more but not more than 0.070 mm, compacted by sintering and rolling Also classified in accordance with: Harmonised System Explanatory Notes (HSENs) to heading 7326 Note (2)

  • UK 7326200090 Valid Jan 3, 2025 to Jan 2, 2028 · Ruling 600011671 on GOV.UK

    Figurines which are made of 100% PVC and attached to cast metal keyrings. The products are distributed at trade shows as giveaways in blind bag packaging.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading 7326 - Other articles of iron or steel GIR 5 (b) has been used to identify the type of packaging. The keyrings are packaged individually in blind bag packaging GIR 6 has been used to classify the goods to subheading level 732620 - Articles of iron or steel wire 10 Digit Code - 7326200090 - Other than for use in civil aircraft; Other than metal fleece, consisting of a mass of stainless steel wires of diameters of 0.001 mm or more but not more than 0.070 mm, compacted by sintering and rolling Also classified in accordance with: Harmonized …

+ 91 more
  • UK 7326200090 Valid Nov 27, 2025 to Nov 26, 2028 · Ruling 600014045 on GOV.UK

    Heavy duty black large metal rat trap. The item is sold in bulk quantities. It is designed to capture rodents indoors or outdoors. It has a steel wire used in the spring mechanism. This has been confirmed by the trader via email. The blister packaging is used for transportation and display as it has a hanging slot.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 7326 – Other articles of iron and steel. GIR 3 (b) - Has been used as the steel wire is considered to be the essential character. GIR 5 (b) - Has been used to identify the type of packaging. GIR 6 - Has been used to classify the goods to subheading level 7326 20 – Articles of iron and steel wire. 10 Digit Code 7326 20 00 90 – Other than elsewhere specified in this heading. Also classified in accordance with: Harmonised System Explanatory Notes (HSENs) note (2) to heading 7326.

  • UK 7326200090 Valid Nov 27, 2025 to Nov 26, 2028 · Ruling 600014046 on GOV.UK

    2 pack heavy duty black metal mouse trap. The item is sold in bulk quantities. It is designed to capture rodents indoors or outdoors. It has a steel wire used in the spring mechanism. This has been confirmed by the trader via email. The blister packaging is used for transportation and display as it has a hanging slot. The item is put up for retail sale in sets of 2.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 7326 – Other articles of iron and steel. GIR 5 (b) - Has been used to identify the type of packaging. GIR 6 - Has been used to classify the goods to subheading level 7326 20 – Articles of iron and steel wire. 10 Digit Code 7326200090 – Other than elsewhere specified in this heading. Also classified in accordance with: Harmonised System Explanatory Notes (HSENs) note (2) to heading 7326.

  • UK 7326909290 Valid Dec 8, 2023 to Dec 7, 2026 · Ruling 600009067 on GOV.UK

    The product is a film dispenser that is used to roll film across carpet for protection. It has an adjustable handle and is made from stainless steel and is open die forged. The measurements are 600mm and a 1200mm weight 2.68kg.

    Justification

    Classification has been determined in accordance with the following: - For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1) b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - Has been used to classify this product by the terms of Heading 7326 - Other articles of iron or steel GIR 6 - Has been used to classify this product to subheading level 7326 90 - Other; 8 - Digit Code: 732690 92 - Other than; elsewhere specified; Other articles of iron or steel; open-die forged 10 - Digit Code 73269092 90 - Other than; elsewhere specified Also classified in accordance with: Harmonized System Explanatory Notes (HSEN’s) to heading 7616

  • UK 7326909290 Valid Jan 8, 2024 to Jan 7, 2027 · Ruling 600009369 on GOV.UK

    The product is a film dispenser that is used to roll film across a window for protection and is self-adhesive. It has a nylon strap that goes around the neck, this keeps the arms free. Made from stainless steel and is open die forged. The measurements are 600mm and weight 2.68kg.

    Justification

    Classification has been determined in accordance with the following: - For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1) b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - Has been used to classify this product by the terms of Heading 7326 - Other articles of iron or steel GIR 6 - Has been used to classify this product to subheading level 7326 90 - Other; 8 - Digit Code: 732690 92 - Other than; elsewhere specified; Other articles of iron or steel; open-die forged 10 - Digit Code 73269092 90 - Other than; elsewhere specified Also classified in accordance with: Harmonized System Explanatory Notes (HSEN’s) to heading 7326

  • UK 7326909290 Valid Feb 20, 2024 to Feb 19, 2027 · Ruling 600009788 on GOV.UK

    The product is bird spikes used as a deterrent for birds roosting and nesting on buildings. It is constructed from a plastic base support with angled metal wire spikes. The base is colourless/clear without texture or a mirror finish. The spikes are cold formed, silver in colour and made from open-die forged stainless steel. The plastic base is glued onto the top of the desired area, such as a wall. The spikes protrude at a 60 degree angle and are 50cm long. They are supplied as a bundle of 10 measuring 5m in total. Base: 550 mm long. Wide spikes: 150mm apart. Narrow spikes: 66mm apart. Packaged in a cardboard box.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 7326: Other articles of iron or steel. GIR 5 (b) has been used to identify the type of packaging: packaged in a cardboard box. GIR 6 has been used to classify the goods to subheading: 732690: Other than elsewhere specified. 8 Digit Code: 73269092: Other articles of iron or steel; Open die-forged. 10 Digit Code: 7326909290: Other than elsewhere specified. Also classified in accordance with: Chapter 73 Note 2 Section XV Note 3 & 9(c) Harmonised System Explanatory Notes (HSEN) to Heading 73.26 Note 2

  • UK 7326909290 Valid Apr 23, 2026 to Apr 22, 2029 · Ruling 600014698 on GOV.UK

    The product is a stainless steel mechanical seal face and is one of the two seal faces in a mechanical seal assembly. The stainless steel seal faces are machined from commercially available steel alloys using CNC or manual machining processes and undergo electropolishing. The seal is open - die forged and each seal face is custom made to precise specifications and combined with other mechanical seal elements and used solely for specific mechanical seals in industrial rotary applications, to prevent leakage between rotating and stationary elements.

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect- a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIRs): GIR 1 - Has been used to classify this product by the terms of heading 7326 - Other articles of iron or steel. GIR 6 - Has been used to classify the goods to subheading level 732690 - Other than forged or stamped, but not further worked; other than articles of iron or steel wire. 8 Digit Code 73269092 - Other articles of iron or steel; open-die forged. 10 Digit Code 7326909290 - Other than elsewhere specified. Also classified in accordance with: Section notes 3 to section XV. Harmonised System Explanatory Notes (HSENs) to Heading 7326. Harmonized System Explanatory Notes (HSEN's) notes parts to heading 8413.

  • UK 7326909290 Valid Jul 17, 2026 to Jul 16, 2029 · Ruling 600015615 on GOV.UK

    The Pull-In Head Assembly is principally constructed from fabricated and forged stainless steel components, which provide the primary structural integrity and mechanical strength of the assembly. It also incorporates polyurethane (PU) elements that provide grip, cushioning, and protection during operation, together with replaceable weak-link bolts. The assembly is predominantly composed of fabricated and forged stainless steel parts, with the polyurethane and weak-link bolts serving ancillary functions. The Pull-In Head (PIH) is designed for use in pulling the Cable Protection System (CPS) into a monopile or bellmouth installation. It incorporates a replaceable weak-link bolt that is engineered to disconnect the CPS from the cable once the system has been fully pulled into position and securely latched. Packed in wooden crates for transport and storage.

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect-a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIRs): GIR 1 - Has been used to classify this product by the terms of heading 7326 - Other articles of iron or steel. GIR 5a - Has been used to identify the type of packaging - wooden crates. GIR 6 - Has been used to classify the goods to subheading level 732690 - Other than forged or stamped, but not further worked; other than articles of iron or steel wire. 8 Digit Code 73269092 - Other articles of iron or steel; open-die forged. 10 Digit Code 7326909290 - Other than elsewhere specified. Also classified in accordance with: Section notes 3 to section XV. Harmonised System Explanatory Notes (HSENs) to Heading 7326.

  • UK 7326909490 Valid Nov 10, 2023 to Nov 9, 2026 · Ruling 600008855 on GOV.UK

    A coupler made of closed die-forged galvanised steel. It comprises 2 steel plates shaped in such a way that they can be fitted around the support posts of temporary fencing. In the centre of these plates is an anti-tamper locking nut that can only be tightened or undone with a particular type of tool. This nut is used to hold the two pieces together, when attached to the temporary fencing they are able to hold the fencing posts in place preventing unwanted separation of the fencing which could otherwise lead to unwanted access to the area beyond

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 7326 – Other items of iron or steel GIR 6 has been used to classify the goods to sub-heading 7326 90 – Other than forged or stamped but not further worked; other than articles of steel wire Code to 8 digits - 7326 9094 – Closed die forged Code to 10 digits - 7326 9094 90 – Other than elsewhere specified in this subheading Also classified in accordance with :- Harmonised Standard Explanatory Notes (HSENs) to heading – 7326

  • UK 7326909490 Valid Apr 9, 2025 to Apr 8, 2028 · Ruling 600012654 on GOV.UK

    A keyring of a plush toy character. The metal clasp and plush toy are joined together in a way that facilitates handling the keys. The Metal clasp to hold the keys is made from Iron which is attached to the plush toy character. The plush toy is made from polyester and filled with polyfill and lavender. Measurements are Size of Toy 8cm with Keyring attached 12cm The product is packaged on a backing card.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading 7326 - Other articles of iron or steel GIR 3B - has been used as the constituent material (Iron) is considered to be the essential character. GIR 5 (b) - has been used to identify the type of packaging. GIR 6 - has been used to classify the goods to subheading level - 732690 - Other than elsewhere specified 8 Digit Code - 73269094 - Other articles of iron or steel - Closed-die forged 10 Digit Code - 7326909490 - Other than elsewhere specified this heading Also classified in accordance with: Note 3 to Section XV Harmonised system …

  • UK 7326909490 Valid Nov 4, 2025 to Nov 3, 2028 · Ruling 600013925 on GOV.UK

    Kit which includes components for hanging pictures to walls. Kit includes a small spirit level, nails, hanging wire (coiled) and 2 styles of hooks. Item is packaged on a display card covered in a blister pack for retail sale.

    Justification

    Legal justification Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 7326- Other articles of iron or steel. GIR 3b - Has been used as the hooks are considered to be the essential characteristic. GIR 5 (b) - Has been used to identify the type of packaging. Item is packaged on a display card covered in a blister pack for retail sale. GIR 6 - Has been used to classify the goods to subheading level 732690 – other than elsewhere specified, other than, articles of iron or steel 8 Digit Code 73269094 – other than elsewhere specified, closed-die forged 10 Digit Code 7326909490 – other than elsewhere …

  • UK 7326909890 Valid Nov 10, 2023 to Nov 9, 2026 · Ruling 600008904 on GOV.UK

    The products are replacement axles for a wheelie-bins. They consist of a single cylindrical metal rod machined to a point at each end with a notch to allow the wheels to be mounted and axles to be attached to the wheelie-bin. They are made from hot-extruded metal. They come is 2 lengths. One axle is 45cm, it weighs 300 grams and is designed to be fitted to wheelie-bin with a capacity of 120 litres. The other is 54cm, weighing 350 grams and is designed to be fitted to a wheelie-bin with a capacity of 240 litres.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 7326 - Other articles of iron or steel GIR 6 has been used to classify the goods to sub-heading 732690 - Other than forged or stamped, but not further worked; other than articles of iron or steel wire Code to 8 digits - 7326 9098 – Other articles of steel; other than elsewhere specified in this subheading Code to 10 digits - 7326 9098 90 – Other than elsewhere specified in this subheading Also classified in accordance with :- Harmonised Standard Explanatory Notes (HSENs) to heading – 7326 Note 3 to Ch73

  • UK 7326909890 Valid Nov 23, 2023 to Nov 22, 2026 · Ruling 600009097 on GOV.UK

    Metal stay for brooms. They are made of galvanised steel and measures 34 cm long by 1 cm wide.

    Justification

    Classification has been determined in accordance with the following: - For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 7326 Other articles of iron or steel GIR 6 has been used to classify the goods to subheading level 732690 Other than elsewhere specified 8 Digit code 73269098 other articles of iron or steel; Other than open-die forged, closed-die forged or sintered 10 Digit code 7326909890 Other than elsewhere specified Also classified in accordance with: Section 3 to XV Harmonised System Explanatory Notes (HSEN)’s to 7326

  • UK 7326909890 Valid Nov 16, 2023 to Nov 15, 2026 · Ruling 600009194 on GOV.UK

    Steel clothes rail The steel fashion clothes racks come flat packed, each rack comes in 6 pieces with 12 screws in one box A base that has 4 holes to hold the poles upright with a top to support the clothes rail in position 40 boxes

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1) b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - has been used to classify this product by the terms of heading 7326 - Other articles of iron or steel. GIR 2 (a) has been used as the goods are unassembled GIR 5 (b) has been used to identify the type of packaging. GIR 6 - has been used to classify the goods to subheading level 732690 – Other than forged or stamped, but not further worked or articles of iron or steel wire. 8 Digit code 73269098 – Other than elsewhere specified in this subheading. 10 Digit code 7326909890 – Other than elsewhere specified. Also classified in accordance with: Note 3 to Section XV Harmonised System Explanatory Notes (HSENs) to Heading 7326

  • UK 7326909890 Valid Dec 5, 2023 to Dec 4, 2026 · Ruling 600009228 on GOV.UK

    Laptop Shelf made of predominantly steel, aluminium and plastic. It is designed to hold a laptop to enable it to be positioned at a convenient height to make it as comfortable as possible for the user. The laptop shelf comes with an inbuilt USB hub installed within it, to allow easy charging of devices.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading 7326 - Other articles of iron or steel GIR 6 has been used to classify this product to subheading level 732690 - Other than forged or stamped, but not further worked and other than articles of iron or steel wire 8 Digit Code 73269098 - Other than elsewhere specified 10 digit code 7326909890 - Other than elsewhere specified Also classified in accordance with: Harmonised System Explanatory Note (HSENs) to heading 7326 and Note 3 to Section XV

  • UK 7326909890 Valid Nov 28, 2023 to Nov 27, 2026 · Ruling 600009265 on GOV.UK

    Carbon Steel stand which can be used with an electric barbeque. The stand is made of steel and coated in ceramic and has two wheels to allow it to move easily. It is packaged in a cardboard box.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading 7326 - Other articles of iron or steel GIR 5 (b) - has been used to identify the type of packaging - cardboard box GIR 6 has been used to classify this product to subheading level 732690 - Other than forged or stamped, but not further worked and other than articles of iron or steel wire 8 Digit Code 73269098 - Other than elsewhere specified 10 digit code 7326909890 - Other than elsewhere specified Also classified in accordance with: Harmonised System Explanatory Note (HSENs) to heading 7326 and Note 3 to Section XV

  • UK 7326909890 Valid Dec 21, 2023 to Dec 20, 2026 · Ruling 600009323 on GOV.UK

    This product is a reusable dental floss holder that comes with floss. The floss holder is made of stainless steel, it is designed to replace single use plastic floss picks that are used daily by individual consumers. Designed to access all teeth, with softened edges and offering an innovative way to both 'snag' the floss onto the holder and keep the floss in place during use whilst still being able to change tension and rotate. The product comes in packaging that is made from a single piece of recyclable kraft card that folds in on itself for delivery and display, and breaks back down for disposal to help reduce our environmental impact.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify the product to heading 7326 - Other articles of iron or steel GIR 3b has been used as the Dental floss holder is considered to be the essential character GIR 5b has been used to identify the type of packaging GIR 6 has been used to classify the goods to subheading level 732690 – Other than Forged or stamped, but not further worked; Other than Articles of iron or steel wire Eight digit code 73269098 – Other than open-die forged; closed-die forged; sintered Ten digit code 7326909890 – Other than elsewhere specified within this subheading Also classified in accordance with: Note 3 to …

  • UK 7326909890 Valid Feb 7, 2024 to Feb 6, 2027 · Ruling 600009728 on GOV.UK

    DEFENDER 6X6 Mobile welding frame and screen (no castors) These are all mobile welding screens, used in metal fabrication as a health & safety screen to stop harmful welding flash being viewed by passers- by The screens are made from 0.4mm thick flexible PVC sheet which stops the harmful UV rays from damaging human eyes with eyelets attached to enable them to be easily attached to the steel tube frames The steel tubes are powder coated black The products are supplied in kit form with instructions included to make the frames. They are supplied individually boxed in cardboard cartons.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1) b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - has been used to classify this product by the terms of heading 7326 - Other articles of iron or steel. GIR 2(a) has been used as the goods are unassembled GIR 3(b) has been used as the steel frame is considered to be the essential character. GIR 5(b) has been used to identify the type of packaging. GIR 6 - has been used to classify the goods to subheading level 732690 – Other than forged or stamped, but not further worked or articles of iron or steel wire. 8 Digit code 73269098 – Other than elsewhere specified in this subheading. 10 Digit code 7326909890 – Other than elsewhere specified. Also classified in accordance with: Note 3 to Section XV Harmonised …

  • UK 7326909890 Valid Feb 13, 2024 to Feb 12, 2027 · Ruling 600009837 on GOV.UK

    DEFENDER 400 Professional screen with castors 6ft 3” x 6ft 4 Mobile welding screens, used in metal fabrication as a health & safety screen to stop harmful welding flash being viewed by passers-by The flexible PVC screen stops the harmful UV rays from damaging human eyes The screens are made from 0.4mm thick flexible PVC sheet with eyelets attached to enable them to be easily attached to the steel tube frames. Frames are very similar to a portable clothes rail in design supplied with castors. The products are supplied in kit form with instructions included to make the frames They are supplied individually boxed in cardboard cartons.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1) b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - has been used to classify this product by the terms of heading 7326 - Other articles of iron or steel. GIR 2(a) has been used as the goods are unassembled GIR 3(b) has been used as the steel frame is considered to be the essential character. GIR 5(b) has been used to identify the type of packaging. GIR 6 - has been used to classify the goods to subheading level 732690 – Other than forged or stamped, but not further worked or articles of iron or steel wire. 8 Digit code 73269098 – Other than elsewhere specified in this subheading. 10 Digit code 7326909890 – Other than elsewhere specified. Also classified in accordance with: Note 3 to Section XV Harmonised …

  • UK 7326909890 Valid Feb 8, 2024 to Feb 7, 2027 · Ruling 600009840 on GOV.UK

    Defender welding frame (frame only). Mobile welding screens, used in metal fabrication as a health & safety screen to stop harmful welding flash being viewed by passers-by. Frames are very similar to a portable clothes rail in design. 2/5 frames are supplied with castors. The steel frame is formed into tubes and powder coated black The products are supplied in kit form with instructions included to make the frames They are supplied individually boxed in cardboard cartons.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1) b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - has been used to classify this product by the terms of heading 7326 - Other articles of iron or steel. GIR 2(a) has been used as the goods are unassembled GIR 5(b) has been used to identify the type of packaging. GIR 6 - has been used to classify the goods to subheading level 732690 – Other than forged or stamped, but not further worked or articles of iron or steel wire. 8 Digit code 73269098 – Other than elsewhere specified in this subheading. 10 Digit code 7326909890 – Other than elsewhere specified. Also classified in accordance with: Note 3 to Section XV Harmonised System Explanatory Notes (HSENs) to Heading 7326

  • UK 7326909890 Valid Mar 4, 2024 to Mar 3, 2027 · Ruling 600009925 on GOV.UK

    A headset stand made from steel. This is black in colour. It is for gaming headsets. It is made from a sheet of metal which has been cut, shaped and sprayed. There is a brand logo on the item.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) Classification has been determined in accordance with the following: General Interpretative Rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 7326: Other articles of iron or steel GIR 6 has been used to classify this product by the terms of heading 732690: Other than forged or stamped, but not further worked, other than articles of iron or steel wire 8 Digit code 73269098: Other than open-die forged, closed - die forged, other than sintered 10 Digit code 7326909890: Other than elsewhere specified Also classified in accordance with: Section note 3 to heading 7326

  • UK 7326909890 Valid Mar 5, 2024 to Mar 4, 2027 · Ruling 600009970 on GOV.UK

    A Steel Metal Display used for hanging safety glasses or work gloves within a retail environment. It is a counter top display and is powder coated black over the steel frame. The product is available in two sizes, with 3 or 4 hangers and has magnetic branding on the top or bottom which is changeable for sustainability. Individually packaged within cardboard and is the display only and does not include any products to hang.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading 7326 - Other articles of iron or steel GIR5 (b) has been used to identify the type of packaging - Individually packaged within cardboard GIR 6 has been used to classify this product to subheading level 732690 - Other than forged or stamped, but not further worked; Other than articles of iron or steel wire 8 Digit Code 73269098 - Other articles of steel; Other than elsewhere specified in this subheading 10 Digit Code 7326909890 - Other than elsewhere specified in this subheading Also classified in accordance with: Note 3 to Section XV and …

  • UK 7326909890 Valid Mar 26, 2024 to Mar 25, 2027 · Ruling 600010054 on GOV.UK

    Impact Limiter for Large Transport Container. The two Impact Limiters act as a bumper, or fender, so that in the event of any impact, the container is undamaged. Each Impact Limiter is constructed of double skinned stainless steel and will be filled with a foam composite. The Impact Limiter steel work is fabricated in the UK, and the foam fill is undertaken in the US as it is a patented process only undertaken in the US. The engineering is forged steel, welded together. The Impact Limiters are attached to the container for transport by road or rail. If the container is in a collision during transport, then the Impact Limiter absorbs the energy from the collision. The Impact Limiters are packaged in a wooden crate.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect: a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIRs): GIR 1 has been used to classify this product by the terms of heading 7326 - For Other articles of iron or steel GIR 5(b) has been used to identify the type of packaging GIR 6 has been used to classify this product by the terms of heading 732690 - For other than, articles of iron or steel wire 8-digit Code - 73269098 - For other than elsewhere specified in this sub-heading 10-digit Code -7326909890 - For other than elsewhere specified in this commodity code Also Classified in Accordance with: Note 3 to Section XV Harmonised System Explanatory Note (HSENs) to heading 7326 Harmonised System Explanatory Notes (HSENs) …

  • UK 7326909890 Valid Mar 26, 2024 to Mar 25, 2027 · Ruling 600010148 on GOV.UK

    The goods are described as a hardware metal FastClip Set comprised of stainless steel clips and screws used in conjunction with WPC decking and cladding boards. They are used for the installation of outdoor deck flooring and outdoor wall cladding systems. The clip size is customised exactly to the boards. Each pack contains 100 clips and associated screws which are packaged in a cardboard box.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 7326: Other articles of iron or steel. GIR 3C has been used as it is considered there is no essential character and therefore has been classified to last in numerical order within the tariff. GIR 5 (b) has been used to identify the type of packaging: packaged in a cardboard box. GIR 6 has been used to classify the goods to subheading 732690: Other than forged or stamped, but not further worked; Other than articles of iron or steel wire. 8 Digit Code 73269098: Other than elsewhere specified. 10 Digit Code 7326909890: Other than elsewhere specified. …

  • UK 7326909890 Valid Mar 25, 2024 to Mar 24, 2027 · Ruling 600010149 on GOV.UK

    Metal Starter Clip Set Stainless steel clips and screws. Used for flooring Each pack contains 100 clips and associated screws packaged in a cardboard box.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1- Has been used to classify this product by the terms of heading 7326 - For Other articles of iron or steel GIR 3(c) has been used as it is considered there is no essential character and therefore has been classified to last in numerical order within the tariff. GIR 5 (b) has been used to identify the type of packaging. GIR 6 - Has been used to classify this product by the terms of heading 7326 90 - For other than, articles of iron or steel wire 8 Digit Code - 732690 98 - For other than elsewhere specified in this sub-heading 10 Digit Code -73269098 90 - For other than elsewhere specified in this commodity code …

  • UK 7326909890 Valid Mar 25, 2024 to Mar 24, 2027 · Ruling 600010153 on GOV.UK

    Cladding Clip 31x52mm L-shape stainless steel fixing clip. Made of 304 stainless steel. Powder coated colour. Each pack contains 100 clips packaged in a cardboard box.

    Justification

    Classification has been determined in accordance with the following: Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1- Has been used to classify this product by the terms of heading 7326 - For Other articles of iron or steel GIR 5 (b) has been used to identify the type of packaging. GIR 6 - Has been used to classify this product by the terms of heading 7326 90 - For other than, articles of iron or steel wire 8 Digit Code - 732690 98 - For other than elsewhere specified in this sub-heading 10 Digit Code -73269098 90 - For other than elsewhere specified in this commodity code Also Classified in Accordance with: Note 3 to Section XV Harmonised System Explanatory …

  • UK 7326909890 Valid Apr 12, 2024 to Apr 11, 2027 · Ruling 600010187 on GOV.UK

    A multi piece handle with locking system for mops and brooms. Comprising of a 1.3m, silver coloured pole in 4 section, which can be assembled and disassembled as required. It is made from steel, with a bright resin coat and has a plastic handle and threaded elements at each joint end. The sections are joined by screwing the joints together. It is available in 21mm and 24mm diameter sizes and is used in conjunction with mops and brooms for cleaning purposes. It is sold to the retail and janitorial market.

    Justification

    Classification has been determined in accordance with the following: - General Interpretative Rules (GIR)s: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - has been used to classify this product by the terms of 7326 - Other articles of iron or steel. GIR 6 - has been used to classify the goods to subheading level 732690 - Other than, forged or stamped, but not further worked, other than articles of steel wire. 8-digit code 73269098 - Other articles of iron or steel: Other than open-die forged, closed-die forged or sintered. 10-digit code 7326909890 - Other than elsewhere specified within this heading. Also classified in accordance with: Section XV - Note 3. Harmonized System Explanatory Notes (HSEN) to heading 7326.

  • UK 7326909890 Valid Mar 25, 2024 to Mar 24, 2027 · Ruling 600010188 on GOV.UK

    Cladding Clip Set 31x52mm L-shape stainless steel fixing clip and screw. Made of 304 stainless steel. Powder coated colour. Each pack contains 100 clips and associated screws packaged in a cardboard box

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s GIR 1- Has been used to classify this product by the terms of heading 7326 - For Other articles of iron or steel GIR 3 (c) has been used as it is considered there is no essential character and therefore has been classified to last in numerical order within the tariff. GIR 5 (b) has been used to identify the type of packaging. GIR 6 - Has been used to classify this product by the terms of heading 7326 90 - For other than, articles of iron or steel wire 8 Digit Code - 732690 98 - For other than elsewhere specified in this sub-heading 10 Digit Code -73269098 90 - For other than elsewhere specified in this commodity code …

  • UK 7326909890 Valid Apr 30, 2024 to Apr 29, 2027 · Ruling 600010262 on GOV.UK

    This product is adjustable steel pedestals. The middle tube of the pedestal is made of steel and the top and bottom plate are made from cast steel. Pedestals are covered with a protective paint layer. The pedestals are used to raise the height of outdoor decking, they are a subframe solution built to elevate the decking framework without the use of posts. Pedestal riser and joint cradle are included. Comes in 5 size options between 18-310mm, boxed in multiple items per carton (quantities depend on the size).

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify the product to heading 7326 - Other articles of iron or steel GIR 3c has been used as it is considered there is no essential character and therefore has been classified to last in numerical order within the tariff GIR 5b has been used to identify the type of packaging GIR 6 has been used to classify the goods to subheading level – Other than forged or stamped, but not further worked; Other than articles of iron or steel wire Eight digit code 73269098 – Other than Open-die forged; Other than Close-die forged; Other than sintered Ten digit code 7326909890 – Other than elsewhere specified …

  • UK 7326909890 Valid Apr 18, 2024 to Apr 17, 2027 · Ruling 600010271 on GOV.UK

    A Fence Post Support designed to be placed in soft ground. The product acts as an anchor to our composite post into soft ground. It is made from high-quality durable galvanised steel. The product comes with plastic fixing sleeves for added structural support. These steel tubes come packed individually and palletised. Dimensions Size: 40mm x 40mm x 1200mm.

    Justification

    Classification has been determined in accordance with the following: - General Interpretative Rules (GIR)s: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - Has been used to classify this product by the terms of heading 7326 - Other articles of iron or steel. GIR 5b - Has been used to identify the type of packaging - These steel tubes come packed individually and palletised GIR 6 - Has been used to classify the goods to subheading level 7326 90 - Other than elsewhere specified within this subheading. 8 - Digit Code 732690 98 - Other articles of iron or steel, Other than elsewhere specified. 10 - Digit Code 73269098 90 - Other than elsewhere specified within this heading. Also Classified in Accordance with: Note 3 to Section XV Harmonized System Explanatory Notes …

  • UK 7326909890 Valid Apr 18, 2024 to Apr 17, 2027 · Ruling 600010272 on GOV.UK

    A Fence Post Support designed for hard ground. The product acts as an anchor to our composite post into solid ground. It is made from high-quality durable galvanised steel and coated black. The product comes boxed complete with 4 x M10 80mm expansion bolts and plastic fixing sleeves for added structural support. Dimensions Size: 110mm x 110mm x 500mm.

    Justification

    Classification has been determined in accordance with the following: - General Interpretative Rules (GIR)s: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - Has been used to classify this product by the terms of heading 7326 - Other articles of iron or steel. GIR 5b - Has been used to identify the type of packaging - Boxed GIR 6 - Has been used to classify the goods to subheading level 7326 90 - Other than elsewhere specified within this subheading. 8 - Digit Code 732690 98 - Other articles of iron or steel, Other than elsewhere specified. 10 - Digit Code 73269098 90 - Other than elsewhere specified within this heading. Also Classified in Accordance with: Note 3 to Section XV Harmonized System Explanatory Notes (HSENs) (1) to Heading 7326

  • UK 7326909890 Valid Apr 30, 2024 to Apr 29, 2027 · Ruling 600010363 on GOV.UK

    This is a wall mount for holding TV sets manufactured by Sky known as Sky Glass. The wall mount is compatible with Generation 1 and Generation 2 Sky Glass TV Sets, with the fixtures and drilled holes aligning specifically to the back of Sky Glass TV’s. The wall mount is a manufactured product made of 2.5mm hot rolled steel and finished in black powder coat paint. The wall mount is affixed to the back of a Sky Glass TV set with screws so that the Sky Glass TV can then be mounted on a wall. The mount affixes the TV to the wall in a manner that allows the TV to pitch tilt and swivel.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of Heading 7326 - Other articles of iron or steel. GIR 3B - has been used as the Material (Base Metal) is considered to be the essential character. GIR 5 (b) - has been used to identify the type of packaging - Packaged in a box. GIR 6 has been used to classify the goods to subheading level 732690 - Other than Forged or stamped, but not further worked or Articles of iron or steel wire. 8 Digit Code: 73269098 - Other articles of iron or steel; Other than open-die forged, closed-die forged or sintered. 10 Digit Code: 7326909890 – Other than elsewhere specified …

  • UK 7326909890 Valid Jun 3, 2024 to Jun 2, 2027 · Ruling 600010541 on GOV.UK

    Galvanised steel banding in coil form. The galvanized steel is pre-punched with holes. The banding is cut into smaller lengths and used in the plumbing and electrical industry to hold pipes or conduit in place. The banding is screwed at each end to a joist to hold a pipe in place. Packaged on a plastic reel.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of Heading 7326 - Other articles of iron or steel. GIR 3B - has been used as the Material (Base Metal) is considered to be the essential character. GIR 5 (b) - has been used to identify the type of packaging - on a small plastic reel. GIR 6 has been used to classify the goods to subheading level 732690 - Other than Forged or stamped, but not further worked or Articles of iron or steel wire. 8 Digit Code: 73269098 - Other articles of iron or steel; Other than open-die forged, closed-die forged or sintered. 10 Digit Code: 7326909890 – Other than elsewhere …

  • UK 7326909890 Valid Jun 21, 2024 to Jun 20, 2027 · Ruling 600010578 on GOV.UK

    Handling Adapter Set. This product is an adapter set designed specifically to interface with an ejection seat to enable manual removal of the ejection seat from a military aircraft. The set comprises of various adapter assemblies of predominantly steel construction with some aluminium and plastic components. All adapter assemblies are packaged in their own hard plastic transportation/storage case with foam inserts containing cutouts for the adaptor assemblies.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading 7326 - Other articles of iron or steel GIR 5 (a) - has been used to identify the type of packaging. Packaged in their own hard plastic transportation/storage case with foam inserts containing cutouts for the adaptor assemblies GIR 6 has been used to classify this product to subheading level 732690 - Other than forged or stamped, but not further worked; Other than articles or iron or steel wire 8 Digit Code 73269098 - Other than elsewhere specified 10 digit code 7326909890 - Other than elsewhere specified Also classified in accordance with: …

  • UK 7326909890 Valid Jul 11, 2024 to Jul 10, 2027 · Ruling 600010680 on GOV.UK

    The product is a swivel castor containing a 125mm diameter wheel. Primarily for roll cages found in retail stores. It is made from zinc plated steel and includes an axle nut attached to the nib bolt to secure the wheel. The wheel is made of polypropylene with a thermoplastic rubber infill. This allows, for free rotation and features a wheel guard. Typically used in pairs along with two fixed castors for mobility. The castors are packaged, fully assembled in large packing cartons, each containing 400 pieces loosely packed.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR’s) GIR 1 has been used to classify this product by the terms of heading 7326- Other articles of iron or steel. GIR 5(b) has been used to identify the type of packaging- large packing cartons. GIR 6 has been used to classify the goods to subheading level 732690 - Other than forged or stamped, but not further worked & articles or iron or steel wire. 8 Digit code 73269098 - Other articles of iron or steel; Other than elsewhere specified 10 Digit code 7326909890 - Other than elsewhere specified, Also classified in accordance with: Section note 3 to section XV Harmonized System Explanatory Notes (HSEN) to heading 7326

  • UK 7326909890 Valid Aug 13, 2024 to Aug 12, 2027 · Ruling 600011069 on GOV.UK

    A replacement set of 4 adjustable metal feet for a display over counter fridge. The dimensions of the feet are 37mm height x 28.8mm width x 28.8mm depth with a weight of 16g.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1) b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - has been used to classify this product by the terms of heading 7326 - Other articles of iron or steel. GIR 6 - has been used to classify the goods to subheading level 732690 – Other than forged or stamped, but not further worked or articles of iron or steel wire. 8 Digit code 73269098 – Other than elsewhere specified in this subheading. 10 Digit code 7326909890 – Other than elsewhere specified. Also classified in accordance with: Harmonised System Explanatory Notes (HSENs) to Heading 7326, Note 3 to Section XV and Section Note 1(g) to Section XV

  • UK 7326909890 Valid Sep 5, 2024 to Sep 4, 2027 · Ruling 600011288 on GOV.UK

    Pet Isolation gate case made of alloy steel Expands to fit openings, doorways and hallways 75-84 cm wide; stands 110 cm tall. and is suitable for Larger Pets and as a baby gate This tall gate must be fully assembled in opening. - 90° Two Way Open and Stay Door Pressure mounted wall saver design is easy to set up with no tools required, includes 4 wall cups for added security and can be set up in both doorways and as a stair gate for baby One hand open with safety locking feature Great for Children and Pets, Conforms to BS EN1930:2011 safety standards

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: Gir 1 - has been used to classify this product by the terms of heading 7326 - Other articles of iron or steel Gir 6 has been used to classify this product to subheading level 732690 - Other than forged or stamped, but not further worked; Other than articles or iron or steel wire 8 Digit Code 73269098 - Other than elsewhere specified 10 Digit Code 7326909890 - Other than elsewhere specified Also Classified in Accordance with: Harmonised System Explanatory Notes (HSENs) to Heading 7326

  • UK 7326909890 Valid Sep 25, 2024 to Sep 24, 2027 · Ruling 600011361 on GOV.UK

    Replacement feet for a commercial ice machine. The feet are adjustable and can be used to level the item. The outer material is nylon and encases an internal threaded rod made from galvanised steel. The feet can be used for different models and not made specifically for a particular ice machine.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify the product to Heading 7326 - Other articles of iron or steel. GIR 3b - has been used as the galvanised steel (interior rod) is considered to be the essential character. GIR 6 has been used to classify the products to subheading level 732690 - Other than forged or stamped, but not further worked; articles of iron or steel wire. 8 Digit code 73269098 - Other articles of iron or steel; other than open-die forged; closed-die forged or sintered. 10 Digit Code 7326909890 - Other than elsewhere specified. Also classified in accordance with: Section Notes 3 to Section XV. Section Notes …

  • UK 7326909890 Valid Oct 21, 2024 to Oct 20, 2027 · Ruling 600011517 on GOV.UK

    Trolley coin with split ring and clip which are all composed of Iron. The coin is detachable for use in trollies only, with no monetary value. The coin has a small hole to allow it to be attached to the clip. Approximate dimensions: 22mm in diameter and 3mm in thickness. Individually packaged in Poly-Zip-Lock bags.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading 7326 - Other articles of iron or steel GIR 5 (b) - has been used to identify the type of packaging. The products are individually packaged in Poly-Zip-Lock bags GIR 6 has been used to classify this product to subheading level 732690 - Other than forged or stamped, but not further worked; Other than articles of iron or steel wire 8 Digit Code 73269098 - Other articles of iron or steel; Other than open-die forged, closed-die forged or sintered 10 digit code 7326909890 - Other than elsewhere specified. Also classified in accordance with: …

  • UK 7326909890 Valid Oct 21, 2024 to Oct 20, 2027 · Ruling 600011612 on GOV.UK

    QuickSafe Mini Quick-Fit Frame – 600mm (300mm Centres) The Product is made 100% from – mild-steel tube. The mild steel square tubes are made from steel coils with various steps to turn them into square tubes including welding ,rolling , and shaping passed through in rollers to gradually shape it into a square tube.

    Justification

    Classification has been determined in accordance with the following: - General Interpretative Rules (GIR)s: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - Has been used to classify this product by the terms of heading 7326 - Other articles of iron or steel. GIR 6 - Has been used to classify the goods to subheading level 7326 90 - Other than elsewhere specified within this subheading. 8 - Digit Code 732690 98 - Other articles of iron or steel, Other than elsewhere specified. 10 - Digit Code 73269098 90 - Other than elsewhere specified within this heading. Also Classified in Accordance with: Note 3 to Section XV Harmonized System Explanatory Notes (HSENs) (1) to Heading 7326

  • UK 7326909890 Valid Nov 27, 2024 to Nov 26, 2027 · Ruling 600011846 on GOV.UK

    The Vacuum Cover is a double-walled vessel, essentially a vacuum flask. The vacuum prevents conduction and convection of heat, while an additional material prevents radiative losses. This proprietary system provides lasting performance over years without maintenance, effectively a large-scale vacuum flask that is used to insulate the Caldera storage boiler. This product is not open-die forged closed-die forged or sintered.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) GIR 1 has been used to classify this product by the terms of heading 7326 - Other articles of iron or steel GIR 6 has been used to classify the goods to subheading level 732690 - Other 8 Digit Code 73269098 – Other than elsewhere specified in this subheading 10 Digit Code 7326909890 - Other than elsewhere specified in this commodity code Also classified in accordance with :- Harmonised Standard Explanatory Notes (HSENs) to heading - 7326

  • UK 7326909890 Valid Feb 25, 2025 to Feb 24, 2028 · Ruling 600012397 on GOV.UK

    Made from zinc coated mild steel Made with a nylon bushing inside the carabiner clip - they are designed to fit over a wooden top beam to suspend swing seats. Packaged in a plastic bag in either 1's, 2's or 4's

    Justification

    Classification has been determined in accordance with the following: - General Interpretative Rules (GIR)s: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - Has been used to classify this product by the terms of heading 7326 - Other articles of iron or steel. GIR 5b - Has been used to identify the type of packaging GIR 6 - Has been used to classify the goods to subheading level 7326 90 - Other than elsewhere specified within this subheading. 8 - Digit Code 732690 98 - Other articles of iron or steel, Other than elsewhere specified. 10 - Digit Code 73269098 90 - Other than elsewhere specified within this heading. Also Classified in Accordance with: Note 3 to Section XV Harmonized System Explanatory Notes (HSENs) to Heading 7326

  • UK 7326909890 Valid Apr 4, 2025 to Apr 3, 2028 · Ruling 600012751 on GOV.UK

    An anchoring kit designed to be fitted to wooden outdoor play equipment to keep it fixed to the ground. The kit is made of metal. It comprises 4, screws, 4 washers and 4 stamped zinc coated mild steel stakes. The stakes are flat and pointed at one end which goes into the ground and twisted through 90 degrees about a quarter of the way from the other end where there is a hole. A screw and washer is used here to attach each stake to the play equipment. Kit is packaged in a cardboard box

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 7326 – Other articles of steel GIR 3 (b) has been used as the ground stakes are considered to be the essential character. GIR 5 (b) has been used to identify normal packaging for transport GIR 6 has been used to classify the goods to sub-heading 7326.90 – Other than forged or stamped but not further worked; other than articles of steel wire Code to 8 digits - 7326.9098 – Other than elsewhere specified in this subheading Code to 10 digits - 7326 9098 90 - Other than elsewhere specified in this subheading Also classified in accordance with :- Harmonised …

  • UK 7326909890 Valid Apr 8, 2025 to Apr 7, 2028 · Ruling 600012757 on GOV.UK

    A Square heavy duty folding parking post, that is designed to protect a vehicle against theft and also acts as a visual deterrent. The parking post is made from a strong steel metal and is folded downwards to allow the vehicle to go in or out of the parking space. To secure the vehicle, simply stand the parking post up and lock into place with the supplied keys. The parking post has a durable locking base that can be secured on to a concrete or tarmac surface with four bolts. Size of parking post: 7cm x 7cm x 70cm high Plate size: 155mm x 110mm Hole size for bolts: 17mm diameter Supplied with 3 keys Weight: 4.2 kg Boxed in a quantity of 4

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIRs): GIR 1 has been used to classify this product by the terms of heading 7326 – Other articles of steel GIR 3b has been used as the post is considered to be the essential character GIR 5b has been used to identify normal packaging for transport GIR 6 has been used to classify the goods to sub-heading 7326.90 – Other than forged or stamped but not further worked; other than articles of steel wire 8 digit code 73269098 – Other than elsewhere specified in this subheading 10 digit code 7326909890 - Other than elsewhere specified in this subheading Also classified in accordance with : Harmonised Standard Explanatory Notes …

  • UK 7326909890 Valid Aug 28, 2025 to Aug 27, 2028 · Ruling 600012775 on GOV.UK

    Stand and water container intended for use with Christmas trees or similar articles made entirely of plasitc with a maximum height of 6 feet. Shape is circular, diameter at the base is 400mm. Capacity is 4.75 litres, also with built in clamping mechanism comprising three pins made from metal with a plastic coating which supports a tree trunk with a maximum thickness of 6 inches. Colour is dark green

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 7326 – Other articles of steel GIR 3(b) has been used as the clamping part is considered to be the essential character. GIR 6 has been used to classify the goods to sub-heading 7326 90 – Other than articles of steel wire Code to 8 digits - 7326 9098 – Other than elsewhere specified in this heading Code to 10 digits - 7326 9098 90 – Other than elsewhere specified in this heading

  • UK 7326909890 Valid Apr 8, 2025 to Apr 7, 2028 · Ruling 600012777 on GOV.UK

    The product is a Christmas tree stand, it comprises 2 main parts – the bowl in which the base of the tree sits which is made of plastic and the support stand which is made of metal. The support stand comprises 4 long pins that support the trunk and is held in place around the base of the bowl. The bowl itself has a capacity of up to 4 litres

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 7326 - Other articles of iron or steel GIR 3(b) has been used as the metal part that supports the tree is considered to be the essential character. GIR 6 has been used to classify the goods to sub-heading 7326 90 – Other than forged or stamped; other than articles of steel wire Code to 8 digits - 7326 9098 – Other than elsewhere specified in this subheading Code to 10 digits - 7326 9098 90 – Other than elsewhere specified

  • UK 7326909890 Valid Apr 8, 2025 to Apr 7, 2028 · Ruling 600012778 on GOV.UK

    The product is a Christmas tree stand and water container. The unit comprises a water container of a capacity of between 3.75 and 7 litres and threaded metal clamping screws that tighten up against the base of the tree. Diameter of the unit is between 40-50cm. Intended use is to support trees with a trunk diameter of between 5½ and 6 inches and a height of between 7-10 feet

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 7326 - Other articles of iron or steel GIR 3(b) has been used as the metal clamps that hold tree is considered to be the essential character. GIR 6 has been used to classify the goods to sub-heading 7326 90 – Other than forged or stamped; other than articles of steel wire Code to 8 digits - 7326 9098 – Other than elsewhere specified in this subheading Code to 10 digits - 7326 9098 90 – Other than elsewhere specified

  • UK 7326909890 Valid May 6, 2025 to May 5, 2028 · Ruling 600012946 on GOV.UK

    A steel and plastic handle, which is made of cold rolled steel and polypropylene. It has a threaded element at one end for screwing a cleaning brush or dustpan (not subject to this ATaR) onto it. The product is packaged as individual item in a plastic bag. The dimensions of the product are L820mm X W24mm X H24mm. The product is made in Italy and is to be sold to retailers and janitorial markets.

    Justification

    Classification has been determined in accordance with the following: - General Interpretative Rules (GIR)s: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - has been used to classify this product by the terms of 7326 - Other articles of iron or steel. GIR 5b - has been used to identify the type of packaging. GIR 6 - has been used to classify the goods to subheading level 732690 - Other than, forged or stamped, but not further worked, other than articles of steel wire. 8-digit code 73269098 - Other articles of iron or steel: Other than open-die forged, closed-die forged or sintered. 10-digit code 7326909890 - Other than elsewhere specified within this heading. Also classified in accordance with: Section XV - Note 3. Harmonized System Explanatory Notes (HSEN) to …

  • UK 7326909890 Valid May 15, 2025 to May 14, 2028 · Ruling 600012948 on GOV.UK

    The product is a freestanding base made of heavy duty galvanised steel. The product is used as a base for display stand for Christmas trees (display stand available separately.) The freestanding base has been designed specifically to create a single tree display for any location. Dimensions Size: 60cm diameter. The freestanding bases are sold individually.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR): GIR 1 - Has been used to classify this product by the terms of heading 7326 - Other articles of iron or steel. GIR 6 - Has been used to classify the goods to subheading level 7326 90 – Other than forged or stamped, but not further worked; Or articles of iron or steel wire. Digit Code: 732690 98 – Other than elsewhere specified in this subheading. Digit Code: 73269098 90 – Other than elsewhere specified. Also classified in accordance with: Note 3 to Section XV Harmonised System Explanatory Notes (HSENs) to Heading 7326

  • UK 7326909890 Valid May 15, 2025 to May 14, 2028 · Ruling 600012949 on GOV.UK

    Tractor mounted steel funnels for trees between 12’ and 20’. Supported with a heavy duty galvanised steel frame and fitted with three-point linkage for tractor mounting. The funnels come in two sizes 90cm and 120cm. These funnels are suitable for use in the plantation or loading yards. A Netting funnel has been designed to be used to assist with the wrapping of Christmas trees. The tree is pushed through the funnel and into netting to compact it for easier transportation and distribution.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR): GIR 1 - Has been used to classify this product by the terms of heading 7326 - Other articles of iron or steel. GIR 6 - Has been used to classify the goods to subheading level 7326 90 – Other than forged or stamped, but not further worked; Or articles of iron or steel wire. Digit Code: 732690 98 – Other than elsewhere specified in this subheading. Digit Code: 73269098 90 – Other than elsewhere specified. Also classified in accordance with: Note 3 to Section XV Harmonised System Explanatory Notes (HSENs) to Heading 7326

  • UK 7326909890 Valid Jun 19, 2025 to Jun 18, 2028 · Ruling 600012953 on GOV.UK

    A galvanised steel netting funnel that has a long barrel for easy loading, use, and to reduce damage to Christmas trees. It also has a heavy duty angle steel legs as a base. The tree is pushed through the funnel and into netting to compact it for easier transportation and distribution. This steel netting has a metal spreader ring that ensures an even flow of the net, which is held in place with a rubber ring, and has dimensions of 34 cm to 65 cm. A safety knife set to cut the net is mounted on the funnel leg. This funnel is delivered part assembled.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR): GIR 1 - Has been used to classify this product by the terms of heading 7326 - Other articles of iron or steel. GIR 6 - Has been used to classify the goods to subheading level 7326 90 – Other than forged or stamped, but not further worked; Other than articles of iron or steel wire. 8 Digit Code: 732690 98 – Other than elsewhere specified in this subheading. 10 Digit Code: 73269098 90 – Other than elsewhere specified. Also classified in accordance with: Note 3 to Section XV Harmonised System Explanatory Notes (HSENs) to Heading 7326

  • UK 7326909890 Valid May 15, 2025 to May 14, 2028 · Ruling 600012955 on GOV.UK

    The product is a two-section funnel made of galvanised and powder coated steel, with painted tubular steel legs form a solid frame for the netting funnel and includes an attached safety knife. The netting funnel is available in 5 sizes. A Netting funnel has been designed to be used to assist with the wrapping of Christmas trees. The tree is pushed through the funnel and into netting to compact it for easier transportation and distribution.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR): GIR 1 - Has been used to classify this product by the terms of heading 7326 - Other articles of iron or steel. GIR 6 - Has been used to classify the goods to subheading level 7326 90 – Other than forged or stamped, but not further worked; Or articles of iron or steel wire. Digit Code: 732690 98 – Other than elsewhere specified in this subheading. Digit Code: 73269098 90 – Other than elsewhere specified. Also classified in accordance with: Note 3 to Section XV Harmonised System Explanatory Notes (HSENs) to Heading 7326

  • UK 7326909890 Valid Jun 19, 2025 to Jun 18, 2028 · Ruling 600012959 on GOV.UK

    A stand for Christmas tree displays made from heavy duty galvanized steel. The tree display can be screwed onto wooden pallets, decking or sleepers and laid out in a pattern can form pathways. This tree display can be screwed onto wooden pallets, decking or sleepers and laid out in a pattern can form pathways. Once its filled with Christmas trees, then you are able to scroll through looking at every tree on display. The tree display is available in two sizes. The medium size is suitable for trees up to 2.5 m (8’) tall, with a trunk diameter up to 12 cm (4.5’’). The large size is suitable for trees up to 2.7 m (9’) tall, with a trunk diameter up to 14 cm (5.5).

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 has been used to classify this product by the terms of heading 7326: Other articles of iron or steel GIR 6 has been used to classify the goods to subheading level 732690: Other than forged or stamped, but not further worked; Other than articles of iron or steel wire 8 Digit code 73269098: Other articles of iron or steel; Other than open-die forged, closed-die forged or sintered 10 Digit code 7326909890: Other than elsewhere specified Also classified in accordance with: Section Note 3 to Section XV Harmonised System Explanatory Notes to heading 73.26

  • UK 7326909890 Valid Aug 20, 2025 to Aug 19, 2028 · Ruling 600012962 on GOV.UK

    A Christmas tree stand made from premium durable plastic. The stand has a socket diameter of 4 inches, which can support a tree of a height of up to 6 Feet and has a water capacity of 1.30 litres. The stand has four bolts/clamps made of metal (bolts - Mild Steel) ) which are used to hold the tree in place. The Mild Steel bolts are considered to give the product its essential character. Diameter Size: 54cm.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR): GIR 1 - Has been used to classify this product by the terms of heading 7326 - Other articles of iron or steel. GIR 3b - Has been used as the essential character - Steel Bolts/Clamps GIR 6 - Has been used to classify the goods to subheading level 7326 90 – Other than forged or stamped, but not further worked; Or articles of iron or steel wire. Digit Code: 732690 98 – Other than elsewhere specified in this subheading. Digit Code: 73269098 90 – Other than elsewhere specified. Also classified in accordance with: Note 3 to Section XV Harmonised System Explanatory Notes (HSENs) to Heading 7326

  • UK 7326909890 Valid May 15, 2025 to May 14, 2028 · Ruling 600012963 on GOV.UK

    A Christmas tree stand made from plastic with four steel screw bolts. The stand has a socket diameter of 4 inches and has a water capacity of 6.50 litres. It can support a tree up to 7 foot in height. The design of the stand allows for stacking, minimising storage space when not in use. The Christmas stands are sold individually.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR): GIR 1 - Has been used to classify this product by the terms of heading 7326 - Other articles of iron or steel. GIR 3b - Has been used as the essential character - Steel Bolts/Screws GIR 6 - Has been used to classify the goods to subheading level 7326 90 – Other than forged or stamped, but not further worked; Or articles of iron or steel wire. Digit Code: 732690 98 – Other than elsewhere specified in this subheading. Digit Code: 73269098 90 – Other than elsewhere specified. Also classified in accordance with: Note 3 to Section XV Harmonised System Explanatory Notes (HSENs) to Heading 7326

  • UK 7326909890 Valid Aug 20, 2025 to Aug 19, 2028 · Ruling 600012964 on GOV.UK

    A Christmas tree stand made from premium green durable plastic, incorporating three mild steel bolts which hold the tree in place. The design of this stand is ideal for stacking thus minimising storage space. The stand has a socket diameter of 4 inches, can support a tree of a height of up to 6 feet’ and has a water capacity of 1.30 litres. Packaging with 22 packed into each unique full-colour display box. Dimension 39cm diameter.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR): GIR 1 - Has been used to classify this product by the terms of heading 7326 - Other articles of iron or steel. GIR 3b - Has been used as the essential character - Steel Bolts/Screws GIR 5b - Has been used to identify the type of packaging - Packaging with 22 packed into each box. GIR 6 - Has been used to classify the goods to subheading level 7326 90 – Other than forged or stamped, but not further worked; Or articles of iron or steel wire. Digit Code: 732690 98 – Other than elsewhere specified in this subheading. Digit Code: 73269098 90 – Other than elsewhere specified. Also classified in accordance with: Note 3 …

  • UK 7326909890 Valid May 15, 2025 to May 14, 2028 · Ruling 600012965 on GOV.UK

    An iron industrial-grade metal stand with four scrolled legs. Stands are secured in a unique space saving stack system. The threaded bolt inserts make for quick and simple tightening while large flange nuts stabilise the tree. A display of stacks in different colours and sizes looks very effective at point of sale. Stands available in two colours and two sizes: 4 and 5 inch stands are available in Red, Green, Black and Gold. The 4” stands has a socket diameter of 4 inches” which can support a tree of a height of up to 7 feet’ and holds a water capacity of 1.20 litres. The 5” stands has a socket diameter of 5”which can support a tree of a height of up to 8 feet’ and holds a water capacity of 1.50 litres. Packed in colour-printed box and cardboard outer cartons for extra protection in transit.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR): GIR 1 - Has been used to classify this product by the terms of heading 7326 - Other articles of iron or steel. GIR 5b - Has been used to identify the type of packaging - Packed in colour-printed box and cardboard outer cartons for extra protection in transit. GIR 6 - Has been used to classify the goods to subheading level 7326 90 – Other than forged or stamped, but not further worked; Or articles of iron or steel wire. Digit Code: 732690 98 – Other than elsewhere specified in this subheading. Digit Code: 73269098 90 – Other than elsewhere specified. Also classified in accordance with: Note 3 to Section XV …

  • UK 7326909890 Valid Aug 27, 2025 to Aug 26, 2028 · Ruling 600012968 on GOV.UK

    Christmas tree stands for supporting Christmas trees of up to 8½ feet high. They have 4 wooden legs and a powder-coated steel support coloured black / silver / white in the centre which holds the tree as well as serving as a container which can hold up to 1.3 litres of water to keep the tree hydrated. In addition there are 4 bolts that screw into the tree trunk to secure it in place. The total diameter of the stands are 56cm with the steel part having diameters of 4 inches. The steel part has been manufactured using processes other than forging or sintering.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 7326 - Other articles of iron or steel GIR 3(c) has been used as it is considered there is no essential character and therefore has been classified to last in numerical order within the tariff. GIR 6 has been used to classify the goods to sub-heading 7326.90 – Other than forged, stamped but not further worked; other than articles of steel wire. Code to 8 digits - 7326.9098 Other than open die forged; other than closed die forged; other than sintered Code to 10 digits - 7326.9098.90 Other than elsewhere specified in this heading Also classified in accordance …

  • UK 7326909890 Valid Aug 12, 2025 to Aug 11, 2028 · Ruling 600012969 on GOV.UK

    4 Christmas tree stands, each made from a single piece of steel. Formed on a lathe. Each one circular and measuring 39cm in diameter in one of four colour schemes with a star pattern around the outside. The centre is hollowed out to form a water container with a 2 litre capacity with a central pin for holding drilled trees.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 7326 - Other articles of iron or steel GIR 6 has been used to classify the goods to sub-heading 7326.90 – Other than forged, stamped but not further worked; other than articles of steel wire. Code to 8 digits - 7326.9098 Other than open die forged; other than closed die forged; other than sintered Code to 10 digits - 7326.9098.90 Other than elsewhere specified in this heading Also classified in accordance with :- Note 3 to section XV Harmonised Standard Explanatory Notes (HSENs) to heading – 7326 Harmonised Standard Explanatory Notes (HSENs) (exclusion note …

  • UK 7326909890 Valid Aug 27, 2025 to Aug 26, 2028 · Ruling 600012971 on GOV.UK

    The product is a Christmas tree stand, it comprises a round plastic bowl with recesses on the sides where a metal clamping system is fitted into it. The bowl is coloured green and has a Christmas themed pattern on the side and has a capacity of between 4 litres. The stand can support Christmas trees with a trunk width of 4½ inches and a height of up to 8 feet. There are no screws or bolts supplied or used in the product

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 7326 - Other articles of iron or steel GIR 3(b) has been used as the metal clamping system is considered to be the essential character. GIR 6 has been used to classify the goods to sub-heading 7326.90 – Other than forged, stamped but not further worked; other than articles of steel wire. Code to 8 digits - 7326.9098 Other than open die forged; other than closed die forged; other than sintered Code to 10 digits - 7326.9098.90 Other than elsewhere specified in this heading Also classified in accordance with :- Note 3 to section XV Harmonised Standard …

  • UK 7326909890 Valid Aug 27, 2025 to Aug 26, 2028 · Ruling 600012972 on GOV.UK

    A heavy-duty stand for commercial display of trees of up to 15’ (4.57m) in height with a tree trunk size, up to 8’’ (20cm). The stand comprises 3 main components, 4 metal legs made from box section steel with dimensions of 50mm x 50mm cross section and 91 cm in length, a galvanised steel water vessel with a spike in the bottom into which the tree is placed and 4 bolts to screw into the tree trunk securing it in place. Other components include 3 wooden wedges that are placed between the tree trunk and the water vessel to help keep it upright

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 7326 - Other articles of iron or steel GIR 3(c) has been used as it is considered there is no essential character and therefore has been classified to last in numerical order within the tariff. GIR 6 has been used to classify the goods to sub-heading 7326.90 – Other than forged, stamped but not further worked; other than articles of steel wire. Code to 8 digits - 7326.9098 Other than open die forged; other than closed die forged; other than sintered Code to 10 digits - 7326.9098.90 Other than elsewhere specified in this heading Also classified in accordance …

  • UK 7326909890 Valid Sep 11, 2025 to Sep 10, 2028 · Ruling 600012975 on GOV.UK

    A Christmas Tree Insert. A metal pot and stand for holding a Christmas tree upright and as a water container. The round shaped tree holder has a square base, and finished with green paint. The tree is held securely in place by tightening the plastic turn caps on the end of four metal bolts. The metal end of the bolt grips the tree and holds it firmly in place. Two sizes are available one for holding trees up to seven foot and one for trees up to eight foot. Water capacity is 120 and 150 litres of water, respectively.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect :– a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR): GIR 1 Has been used to classify this product by the terms of heading 7326 - Other articles of iron or steel. GIR 3b - has been used as the metal bolts are considered to be the essential character. GIR 6 Has been used to classify the goods to subheading level 732690 – Other than forged or stamped, but not further worked; or articles of iron or steel wire. 8 digit code 73269098 – Other articles of iron or steel; other than open-die forged, closed-die forged or sintered. 10 digit code 7326909890 – Other than elsewhere specified within this heading. Also classified in accordance with: Note 3 to Section XV …

  • UK 7326909890 Valid Sep 11, 2025 to Sep 10, 2028 · Ruling 600012977 on GOV.UK

    A Christmas tree stand made from wrought iron. The item comes in four parts and requires assembly. The three ornate scrolled legs are slotted onto the the tree pot. The tree is held securely in the pot by tightening the three metal threaded bolts with the large flange nuts (metal both ends). The stands have a powder coated gloss finish and comes in three sizes, 4, 5 and 6 inches for trees ranging from 7 to 8 foot. The stand also has the capacity to hold water. The product is packed in cardboard outer cartons.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect: a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s: GIR 1 Has been used to classify this product by the terms of heading 7326 - Other articles of iron or steel. GIR 2a has been used as the goods are unassembled. GIR 3(b) has been used as the metal bolts that support the tree are considered to be the essential character. GIR 5b has been used to identify the type of packaging - Cardboard outer cartons. GIR 6 Has been used to classify the goods to subheading level 7326 90 - Other than forged or stamped, but not further worked, or articles of iron or steel wire. 8 Digit Code 7326 9098 – Other articles of iron or steel; other than open-die forged, closed-die forged or …

  • UK 7326909890 Valid Sep 11, 2025 to Sep 10, 2028 · Ruling 600012981 on GOV.UK

    A Christmas tree stand. Made from welded heavy grade steel, the stand holds a large tree in place as well as providing a water reservoir. The stand has three box section legs with rubber end caps on the feet. The tree is held in place by three decorative screws (metal at both ends) and a centre pin at the base. The water is contained with the tree at the base which is held in place by screws bolts with the sharp ends penetrating the bark. A spike at the base further holds the tree in place. The legs and socket parts are all welded and finished in a green powder coating. Three wooden wedges are also supplied if additional support is required.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect: – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a Section or Chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR) GIR 1 has been used to classify this product by the terms of heading 7326 - Other articles of iron or steel GIR 3b has been used as the steel/metal parts that secure the tree are considered to be the essential character. GIR 6 has been used to classify the goods to subheading level 7326 90 - Other than forged or stamped, but not further worked or articles of iron or steel wire 8-digit code 7326 9098 - Other articles of iron or steel; other than open-die forged, closed-die forged or sintered. 10-digit code 7326 909890 - Other than elsewhere specified within this heading. Also classified in accordance with: Note 3 to …

  • UK 7326909890 Valid Aug 26, 2025 to Aug 25, 2028 · Ruling 600012994 on GOV.UK

    A Christmas tree stand made of no-break polypropylene with a strong wall and rib construction. The stand has a ratchet button with push-pull steel bolts to clamp and hold the tree straight and in place. The push-pull tree bolts enable quick release, for instant adjustment or removal of the tree. The stand also has steel spikes to keep the tree in position. For extra stability with heavy trees, the Christmas stand can be fixed to a base by using the moulded screw holes in the spill-guard. The stand has a low, wide reservoir allowing easy access for topping up. It also has spill guards around to protect flooring. The Christmas tree stand can accommodate a wide range of trunk sizes. It is available in three sizes with a socket diameter of 6 inch, 7 inch or 8 inches. The product is packed in printed outer cartons.

    Justification

    Classification has been determined in accordance with the following: - General Interpretative Rules (GIR)s: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - has been used to classify this product by the terms of heading 7326 - Other articles of iron or steel. GIR 3b - has been used as the steel bolts are considered the essential character. GIR 5b - has been used to identify the type of packaging. GIR 6 - has been used to classify the goods to subheading level 732690 - Other than forged or stamped, but not further worked or articles of iron or steel wire. 8-digit code 73269098 - Other than elsewhere specified in this subheading. 10-digit code 7326909890 - Other than elsewhere specified. Also classified in accordance with: Section XV - Note 3. Harmonized System …

  • UK 7326909890 Valid Jul 21, 2025 to Jul 20, 2028 · Ruling 600013028 on GOV.UK

    The product is a ring display. The product is made from a 4mm iron rod covered in foam and velour fabric creating a cushioned surface. The ring display is designed to pass through the ring, with the ring resting atop the cushioned velour fabric. At each end of the cushioned velour fabric are brass caps. The length of the ring display is 30cm and 1cm in diameter. The product is not presented in bespoke packaging.

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General interpretative rules (GIR)s GIR 1 Has been used to classify this product by the terms of heading 7326 - other articles of iron or steel. GIR 3B - Has been used as the Iron is considered to be the essential character. GIR 6 Has been used to classify the goods to subheading level 732690 - other than elsewhere specified. 8 digit code - 73269098 - Other articles of iron or steel; other than elsewhere specified. 10 digit code 7326909890 - other than elsewhere specified. Also Classified in Accordance with: Section XV to Note 3 Harmonized System Explanatory Notes (HSENs) to heading 7326

  • UK 7326909890 Valid May 28, 2025 to May 27, 2028 · Ruling 600013189 on GOV.UK

    Shipping container clamps. Domino Clamps are a universal attachment point for shipping containers, allowing you to bolt more or less anything to the shipping container, but without causing any damage to the container itself. They can be used to attach Scaffold tube, flood lighting, timber, Heras fencing and CCTV cameras among many other items. It is made from drop forged steel, coated with zinc and Xylan for weatherproofing It is drop forged from raw steel. It is formed of 4 parts; a front plate, rear plate, tightening bolt and C clip on the bolt. The clamp inserts into the ISO corner casting of a shipping container. The central bolt is tightened up, causing the rear plate to rotate and close the gap on the front plate. Eventually the front plate is clamped firmly to the front of the corner casting. the font plate features 4 M12 threads so now anything can be bolted to this front plate. Undoing the bolt rotates the rear plate in the opposite direction, allowing it to be removed. Total Weight: 2.4kg (85oz.) It is packaged in a cardboard box for protection.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR): GIR 1 - Has been used to classify this product by the terms of heading 7326 - Other articles of iron or steel. GIR 5b - Has been used to identify the type of packaging - It is packaged in a cardboard box for protection. GIR 6 - Has been used to classify the goods to subheading level 7326 90 – Other than forged or stamped, but not further worked; Or articles of iron or steel wire. Digit Code: 732690 98 – Other than elsewhere specified in this subheading. Digit Code: 73269098 90 – Other than elsewhere specified. Also Classified in Accordance with: Note 3 to Section XV Harmonized System Explanatory Notes (HSENs) to …

  • UK 7326909890 Valid Jun 26, 2025 to Jun 25, 2028 · Ruling 600013208 on GOV.UK

    A duct clamp that is a fastening component manufactured from galvanized or stainless steel, designed to secure circular duct sections and fittings in air distribution systems. The duct clamps are used for attaching ducts to the galvanized rigid ducts. It typically features a quick-lock mechanism or bolt fastening, and may include a rubber lining to enhance grip and minimize vibration or acoustic transmission. The clamp is specifically intended for mechanical support and sealing of ducts within ventilation and air conditioning systems. It does not carry or regulate air directly, but functions as an essential mounting and securing accessory.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR): GIR 1 - Has been used to classify this product by the terms of heading 7326 - Other articles of iron or steel GIR 6 - Has been used to classify the goods to subheading level 7326 90 – Other than forged or stamped, but not further worked; other than articles of iron or steel wire 8 Digit Code: 732690 98 – Other than elsewhere specified in this subheading 10 Digit Code: 73269098 90 – Other than elsewhere specified Also Classified in Accordance with: Note 3 to Section XV Harmonized System Explanatory Notes (HSEN's) to Heading 7326 (1)

  • UK 7326909890 Valid Oct 27, 2025 to Oct 26, 2028 · Ruling 600013706 on GOV.UK

    Blank insert panel made of mild steel, designed to match the Console Chassis and fill an empty slot.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIRs): GIR 1 has been used to classify this product by the terms of heading 7326 - Other articles of iron or steel GIR 6 has been used to classify the goods to sub-heading 732690 – Other than forged or stamped, but not further worked; other than articles of steel wire 8-digit code 73269098 – Other articles of iron or steel, other than elsewhere specified 10-digit code 7326909890 – Other than elsewhere specified Also classified in accordance with: Section Note 3 to Section XV Harmonised Standard Explanatory Notes (HSENs) to heading 7326

  • UK 7326909890 Valid Nov 24, 2025 to Nov 23, 2028 · Ruling 600013797 on GOV.UK

    The product is galvanised steel incinerator, designed for domestic / household use, for burning garden waste including wood and leaves. Made from steel and thickness is 0.4 to 0.45mm. Sheets of steel are moulded into a cylinder shape to form the main chamber. Ventilation holes are drilled into the lower sides and bottom of the chamber. The incinerator comes with a lid and legs to lift from the floor to provide airflow for the fire. Weight of incinerator is 4kg.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3(1) of the Customs Tariff (Establishment) (EU Exit), Regulations 2020 sets out that that the of interpretation contained in the following have effect - a. Part two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3 (1) (b)). General Interpretative Rules (GIRs): GIR 1 - Has been used to classify this product by the terms of heading 7326 - Other articles of iron or steel. GIR 6 - Has been used to classify the goods to subheading level 7326 90 - Other than elsewhere specified within this subheading. 8 Digit Code 732690 98 - Other articles of iron or steel; Other than elsewhere specified. 10 Digit Code 73269098 90 - Other than elsewhere specified within this heading. Also Classified in Accordance with: Note 3 to Section XV Harmonized System Explanatory notes HSEN note (1) to heading 7326

  • UK 7326909890 Valid Jan 6, 2026 to Jan 5, 2029 · Ruling 600014808 on GOV.UK

    Pipe/tube holder made from 304 austenitic stainless-steel and used for holding pipes and tubes in place that require additional support due to their length. The holders are manufactured from a flat bar and formed into shape. Normally packaged in boxes between 25pcs and 100pcs.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 7326 - Other articles of iron or steel GIR 5 (b) - Has been used to identify the type of packaging. Normally packaged in boxes between 25pcs and 100pcs. GIR 6 - Has been used to classify the goods to subheading level 732690 – other than elsewhere specified in this heading 8 Digit Code 73269098 – other than elsewhere specified in this subheading 10 Digit Code 7326909890 - other than elsewhere specified in this subheading Also classified in accordance with: Note 3 to Section XV Harmonized System Explanatory Notes (HSENs) Note (1) to heading 7326 …

  • UK 7326909890 Valid Feb 26, 2026 to Feb 25, 2029 · Ruling 600014831 on GOV.UK

    A holding device or clamp with a triangular appearance, with a wire lever used to hold 25mm diameter mop heads via a clip. Made of steel. Dimensions: Length 141mm x Width 115mm x Height 27mm. Weight 154 grams. Packed singularly in cartons of 75. Box dimensions Length 550mm x Width 370mm x Height 130mm. Bought to be sold to retailers and janitorial markets. Made in China.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 7326 - Other articles of iron or steel GIR 5 (b) - Has been used to identify the type of packaging. Packed singularly into cartons of 75 GIR 6 - Has been used to classify the goods to subheading level 732690 – other than elsewhere specified in this subheading 8 Digit Code 73269098 – other articles of steel; other than elsewhere specified in this sub-heading 10 Digit Code 7326909890 – other than elsewhere specified in this sub-heading

  • UK 7326909890 Valid Jan 29, 2026 to Jan 28, 2029 · Ruling 600014898 on GOV.UK

    The fairlight console bay narrow blank kit made from mild steel is designed to fill unused bay spaces, the narrow blank kit enhances the overall look improves its functionality, ensuring a clean, professional finish. Key features: • Provides a neat, professional finish for any unused bay space in your Fairlight console. • Allows easy expansion in the future without disrupting your current setup. • Maintains the structural integrity and alignment of your console installation. • Matches the design and build quality of official Fairlight hardware for a consistent look. • Quick and simple installation with no specialist tools required. • Helps protect internal components from dust and accidental damage. • Enhances airflow and equipment safety by properly sealing unused bays. • Ideal for maintaining a streamlined, clutter-free studio environment. The Fairlight Console Bay Narrow Blank Kit is designed for studios, post-production facilities, broadcasters, and audio professionals who want to keep their console installations flexible, organised, and ready for future upgrades. It’s also ideal for businesses that need to maintain a professional, client-ready studio appearance.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIRs): GIR 1 has been used to classify this product by the terms of heading 7326 - Other articles of iron or steel GIR 6 has been used to classify the goods to sub-heading 732690 – Other than forged or stamped, but not further worked; other than articles of steel wire 8-digit code 73269098 – Other articles of iron or steel, other than elsewhere specified 10-digit code 7326909890 – Other than elsewhere specified Also classified in accordance with: Section Note 3 to Section XV Harmonised Standard Explanatory Notes (HSENs) to heading 7326

  • UK 7326909890 Valid Apr 23, 2026 to Apr 22, 2029 · Ruling 600015207 on GOV.UK

    The product is a steel wall mounted pegboard for storing and organising tools used in workshops, garages or industrial settings. The mechanically perforated pegboard panels are made from SPCC cold-rolled steel sheets. Also provided with the pegboard are steel metal hooks and tool-holder set for use with spanners, screwdrivers, pillars etc and removable plastic storage bins for small parts such as screw, nuts, bolts etc. Hooks, tool holders and bins can be inserted into the slots and positioned in a number of different ways depending on usage. The product is flat packed into corrugated cardboard cartons for transport. The product is sold as a complete kit ready for installation.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading 7326 - Other articles of iron or steel. GIR5 (b) has been used to identify the type of packaging - retail cardboard box. GIR 6 has been used to classify this product to subheading level 732690 - Other than forged or stamped, but not further worked; Other than articles of iron or steel wire. 8 Digit Code 73269098 - Other articles of steel; Other than elsewhere specified in this subheading. 10 Digit Code 7326909890 - Other articles of iron or steel; Other than open-die forged, closed-die forged or sintered; Other than elsewhere specified. Also …

  • UK 7326909890 Valid Apr 14, 2026 to Apr 13, 2029 · Ruling 600015274 on GOV.UK

    The Floor Scraper Holder - Mini Length 110mmx Width 50mmx height 375mm. Diameter 28mm. Individual product weights 151 grams. Colour silvery. Made from polypropylene and steel. Individually not packaged. 20 pieces in a box. Card dimensions Length 255mm X Width 195mm X Height 100mm.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 7326 - Other articles of iron or steel GIR 3B - has been used as the Metal is considered to be the essential character. GIR 5 (b) - Has been used to identify the type of packaging. GIR 6 - Has been used to classify the goods to subheading level 732690 – other than elsewhere specified in this subheading 8 Digit Code 73269098 – other articles of steel; other than elsewhere specified in this sub-heading 10 Digit Code 7326909890 – other than elsewhere specified in this sub-heading Also classified in accordance with: Note 3 to Section XV Harmonised …

  • UK 7326909890 Valid May 5, 2026 to May 4, 2029 · Ruling 600015391 on GOV.UK

    Trolley and locker coin made of nickel plated iron . Ideal to take when going to supermarkets which require a trolley coin to use a trolley. Also can be used for some lockers too. Fits most UK trolleys and lockers Individually packaged with a cardboard header

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading 7326 - Other articles of iron or steel GIR 5 (b) - has been used to identify the type of packaging. The products are individually packaged with a cardboard header GIR 6 has been used to classify this product to subheading level 732690 - Other than forged or stamped, but not further worked; Other than articles of iron or steel wire 8 Digit Code 73269098 - Other articles of iron or steel; Other than open-die forged, closed-die forged or sintered 10 digit code 7326909890 - Other than elsewhere specified. Also classified in accordance with: …

  • UK 7326909890 Valid Apr 9, 2026 to Apr 8, 2029 · Ruling 600015488 on GOV.UK

    A flexible dusting tool/handle, designed to be used with a removable microfibre sleeve (not part of this classification), for cleaning/ dusting hard to reach places It is bendable, angle adjustable and can also be fitted onto the end of a telescopic pole for high level dusting The handle is made of stainless-steel strip 56 cm large x 1.5 cm wide (thickness 1.5mm), surrounded by cloth and foam It has an aluminium pipe with grip and attachment of polypropylene and a lock of nylon Weight 180gm. The majority of the material is stainless steel Packaged in cartoons in quantities of 50

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General Interpretative Rules (GIRs): GIR 1 has been used to classify this product by the terms of heading 7326 – Other items of steel GIR 5 (b) has been used to identify normal packaging for transport GIR 3(b) Has been used as the stainless steel is the essential character GIR 5(b) Has been used to identify the type of packaging GIR 6 has been used to classify the goods to sub-heading – 732690 - Other than forged or stamped, but not further worked, other than articles of iron or steel wire 8-digit code 73269098 – Other than elsewhere specified in this subheading 10-digit code 7326909890 - Other than elsewhere specified in this commodity code Also …

  • UK 7326909890 Valid Jun 16, 2026 to Jun 15, 2029 · Ruling 600015576 on GOV.UK

    A break frame constructed from zinc-plated steel and zinc-plated galvanised steel. It is designed to incorporate a textile cover (not part of this ATaR) and is intended for use as part of a floor sweeping and cleaning system within the retail and professional janitorial markets. The break frame is manufactured in China. The break frame comes in 4 different sizes - 16inch, 18 inch, 28 inch or 32 inch. There are 10 break frames packed into a cardboard box for transportation.

    Justification

    Classification has been determined in accordance with the following: - General Interpretative Rules (GIR)s: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 - has been used to classify this product by the terms of heading 7326 - Other articles of iron or steel. GIR 5b - has been used to identify the type of packaging - cardboard boxes. GIR 6 - has been used to classify the goods to subheading level 732690 - Other than Forged or stamped, but not further worked: other than articles of iron or steel wire. 8-digit code 73269098 - Other articles of iron or steel; other than open-die forged, closed-die forged or sintered. 10-digit code 7326909890 - Other than elsewhere specified within this heading. Also classified in accordance with: Section XV - Note 3. Harmonized System …

  • UK 7326909890 Valid Aug 7, 2026 to Aug 6, 2029 · Ruling 600015616 on GOV.UK

    Upsized Lost Half A single use component to assist with the installation of a Cable Protection System in the Offshore Wind Industry. Component is designed to break away after install. A bespoke part that forms part of the Pull In Head system. Made up of BSEN 100025 s355 high yield strength steel. CNC machined from solid bar stock. Usually packed in crates.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 has been used to classify this product by the terms of heading 7326: Other articles of iron or steel GIR 5(b) has been used to identify the type of packaging, crates. GIR 6 has been used to classify the goods to subheading level 732690: Other than forged or stamped, but not further worked or articles of iron or steel wire 8 Digit code 73269098: Other articles of iron or steel; Other than open-die forged, closed-die forged or sintered 10 Digit code 7326909890: Other than elsewhere specified Also classified in accordance with: Section Note 3 to Section XV Harmonized System Explanatory Note (HSEN's) to heading 73.26

  • UK 7326909890 Valid Aug 7, 2026 to Aug 6, 2029 · Ruling 600015624 on GOV.UK

    Lifting Frames & Beams Lifting frame or beam used to distribute load and enable safe handling and deployment of concrete mattresses during subsea installation. Used to handle & install concrete bi-flex and uni-flex mattresses. Can also be used to deploy and handle rock bags. This application covers the Frame, primary rigging, beam, shackles and webbing slings. Typically, 6m long but can vary up to 30m in length. Made from steel in S275 for secondary structure and S355 for primary structure. Supplied loose on flatbed trailers / can be containerised if designed for such.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 has been used to classify this product by the terms of heading 7326: Other articles of iron or steel GIR 3b has been used as the steel lifting frame/beam is considered to be the essential character GIR 6 has been used to classify the goods to subheading level 732690: Other than forged or stamped, but not further worked or articles of iron or steel wire 8 Digit code 73269098: Other articles of iron or steel; Other than open-die forged, closed-die forged or sintered 10 Digit code 7326909890: Other than elsewhere specified Also classified in accordance with: Section Note 3 to Section XV Harmonized System Explanatory Note (HSEN's) to heading 73.26

  • UK 7326909890 Valid May 5, 2026 to May 4, 2029 · Ruling 600015661 on GOV.UK

    The V Sweeper Frame consists of Mop handles and paddles of steel consisting of 2 long tubular handles measuring approximately 150 cm that connect to 2 pivoting paddles. With plastic handle grips. The V sweeper frame is used for large floor area coverage. The fabric is attached to the frame (not included) and can be washed and re-used. The product opens to create a sweeping path, and the dust collector uses scissors action to collect the dust. The dimensions of this product are 100cm (40 inches) or 70 cm (28 inches) long.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 - has been used to classify this product by the terms of heading-7326 - Other articles of iron or steel GIR 3B Has been used as the welded steel is considered to be the essential character. GIR 6 - has been used to classify the goods to subheading level - 732690- Other than elsewhere specified. 8 digit code - 73269098- Other articles of iron and steel; Other than open-die forged, closed-die forged or sintered. 10 digit code -7326909890- Other than elsewhere specified. Also classified in accordance with: Note 3 to Section XV Harmonised System Explanatory Notes (HSEN)s to 7326

  • UK 7326909890 Valid Jun 15, 2026 to Jun 14, 2029 · Ruling 600015672 on GOV.UK

    This product is a wall mounting bracket system designed to securely affix flat panel or curved televisions to vertical walls. Suitable for both residential and commercial settings, it allows for space-saving installation and adjustable viewing angles, ensuring an optimal television viewing experience. It is made from Alloy steel with a high-strength dual-arm articulation mechanism with a Surface finish of Powder-coated black for durability and corrosion resistance It works by Tilt adjustment: +5° to -15°, tool-free vertical angle adjustment Swivel adjustment: ±45° horizontal rotation Level adjustment: ±3° for horizontal calibration Extension/retraction and extends up to 420mm (16.5") from the wall, retracts to 74mm (2.9") Packaged in a Cardboard box with bubble wrap cushioning

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIRs): GIR 1 has been used to classify this product by the terms of Heading 7326 - Other articles of iron or steel. GIR 3b has been used as the Material (Base Metal) is considered to be the essential character. GIR 5b has been used to identify the type of packaging - Cardboard box with bubble wrap cushioning GIR 6 has been used to classify the goods to subheading level 732690 - Other than forged or stamped, but not further worked or Articles of iron or steel wire. 8 Digit Code 73269098 - Other articles of iron or steel; Other than open-die forged, closed-die forged or sintered. 10 Digit Code 7326909890 – Other than …

  • UK 7326909890 Valid Jul 15, 2026 to Jul 14, 2029 · Ruling 600015673 on GOV.UK

    An independent tabletop/floor television support stand with a self-contained support structure, designed to securely hold flat panel or curved televisions on television cabinets, desks, or floor surfaces. Intended for use in residential living rooms or bedrooms, providing height adjustment and rotation capabilities, without requiring wall mounting or drilling. The process of manufacture is stamping. Materials: Stand structure - Alloy steel dual-column construction. Base platform - Tempered glass. Surface finish - Powder-coated black. Contents included: Base platform. Dual stand columns. Arm assembly components. Complete set of screws and mounting hardware. Hook accessories for pegboard. Installation instruction manual. Product features and technical specification: TV security lock system. Built-in pegboard with hooks. Designed for fixed placement (no castors) with a high level of stability, however product is also mobile as no wall attachment or furniture integration required. Dual column reinforcement structure. Large glass base (23.6" × 15.0") for enhanced anti-tip protection, and high load capacity (68kg). 5-position column height settings and 3-position arm height settings. 15 height options (42" to 47" adjustment range). Swivel adjustment: ±15° left/right rotation (30° total rotation range). Tilt adjustment: +8° upward tilt to prevent forward tipping of heavy televisions. Non-slip pads on base to protect furniture surfaces. Maximum load capacity: 68 kg (150 lbs). VESA compatibility: 100×100mm to 600×400mm (including all intermediate specifications). Compatible TV sizes: 32" to 90". Packed in separate carton boxes with individual component protection.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General Interpretative Rules (GIR)s: GIR1 – Has been used to classify this product by the terms of heading 7326 - Other articles of iron or steel. GIR5 (b) – Has been used to identify the type of packaging - Separate carton boxes with individual component protection. GIR6 – Has been used to classify the goods to subheading level 732690 - Other than forged or stamped, but not further worked; other than articles of iron or steel wire. 8 Digit Code - 73269098 - Other than elsewhere specified. 10 Digit Code - 7326909890 - Other than elsewhere specified. Also classified in accordance with: Section Note 3 to Chapter 73. Harmonised System Explanatory Notes …

  • UK 7326909890 Valid Jun 15, 2026 to Jun 14, 2029 · Ruling 600015674 on GOV.UK

    This product is a dual-monitor desk mounting arm, specifically engineered to securely attach two computer monitors to office desks or work surfaces. Serving as a practical furniture accessory, it allows for ergonomic adjustment of viewing angles, thereby improving user comfort and maximising desktop workspace efficiency. Constructed from high-strength steel and finished with powder-coated black for enhanced wear resistance and rust protection, the mounting arm features a robust installation system. This includes either a C-clamp or through-hole mechanism, complemented by precision joints and locking components to ensure secure and reliable positioning. Packaged in a cardboard box

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIRs): GIR 1 has been used to classify this product by the terms of Heading 7326 - Other articles of iron or steel. GIR 3b has been used as the Material (Base Metal) is considered to be the essential character. GIR 5b has been used to identify the type of packaging - Cardboard box GIR 6 has been used to classify the goods to subheading level 732690 - Other than forged or stamped, but not further worked or Articles of iron or steel wire. 8 Digit Code 73269098 - Other articles of iron or steel; Other than open-die forged, closed-die forged or sintered. 10 Digit Code 7326909890 – Other than elsewhere specified within this …

  • UK 7326909890 Valid Jun 2, 2026 to Jun 1, 2029 · Ruling 600015684 on GOV.UK

    The S Frame dusting tool is intended for use with an S Frame handle and Dusting Sleeves, which are available separately. It is straightforward to operate and efficiently removes dust. The Sweeper Frame consists of a steel frame in an “S” shape, which connects to a plastic holder by means of a metal connector. This allows for the attachment of cleaning fabric (available separately).

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIRs): GIR 1 has been used to classify this product by the terms of heading-7326 - Other articles of iron or steel GIR 3b has been used as the welded steel is considered to be the essential character. GIR 6 has been used to classify the goods to subheading level - 732690- Other than elsewhere specified. 8 digit code - 73269098- Other articles of iron and steel; Other than open-die forged, closed-die forged or sintered. 10 digit code -7326909890- Other than elsewhere specified. Also classified in accordance with: Note 3 to Section XV Harmonised System Explanatory Notes (HSENs) to 7326

  • UK 7326909890 Valid Jun 3, 2026 to Jun 2, 2029 · Ruling 600015691 on GOV.UK

    A lightweight telescopic pole that extends up to 250cm, featuring an angle adaptor for dusting at 90˚ A dusting frame intended for use with a detachable microfibre sleeve which are available separately for cleaning or dusting purposes Suitable for accessing high areas or for use on floors Made from mild steel Dimensions: 500 x 140 x 50 mm Each carton box contains 10 items

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIRs): GIR 1 has been used to classify this product by the terms of heading-7326 - Other articles of iron or steel GIR 5b has been used to identify the type of packaging - boxed cartons GIR 6 has been used to classify the goods to subheading level - 732690- Other than elsewhere specified. 8 digit code - 73269098- Other articles of iron and steel; Other than open-die forged, closed-die forged or sintered. 10 digit code -7326909890- Other than elsewhere specified. Also classified in accordance with: Note 3 to Section XV Harmonised System Explanatory Notes (HSENs) to 7326

  • UK 7326909890 Valid Aug 28, 2026 to Aug 27, 2029 · Ruling 600015947 on GOV.UK

    Lifting Beam A lifting beam that can be fixed to a crane hook and subsequently to Type B(U) transport packages and used to facilitate safe crane loading/unloading of these packages. The lifting beam is a structural / manual device. Made of stainless steel. A self-contained lifting device to be used with an overhead gantry crane. The beam is a generic, standalone device and can be used on a variety of gantry cranes.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 has been used to classify this product by the terms of heading 7326: Other articles of iron or steel GIR 6 has been used to classify the goods to subheading level 732690: Other than forged or stamped, but not further worked or articles of iron or steel wire 8 Digit code 73269098: Other articles of iron or steel; Other than open-die forged, closed-die forged or sintered 10 Digit code 7326909890: Other than elsewhere specified Also classified in accordance with: Section Note 3 to Section XV Harmonized System Explanatory Note (HSEN's) to heading 73.26

  • UK 7326909890 Valid Sep 2, 2026 to Sep 1, 2029 · Ruling 600015977 on GOV.UK

    A retail set comprising approximately 20 small stainless-steel balls, each mounted on a self-adhesive patch, together with stainless-steel tweezers. The tweezers are used to remove the adhesive patches from the backing strip and position them on the outer ear. Once applied, the stainless-steel balls are pressed against the ear and may remain in place for up to five days. The ear seeds are described as reusable and are marketed for meditation and wellbeing purposes.

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect : a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading-7326 - Other articles of iron or steel. GIR 3B - Has been used to determine that the stainless steel balls are the essential character. GIR 5B - Has been used to identify the type of packaging - Cardboard envelope. GIR 6 - Has been used to classify the goods to subheading level - 732690- Other than elsewhere specified. 8 digit code 73269098- Other articles of iron and steel; Other than open-die forged, closed-die forged or sintered. 10 digit code 7326909890- Other than elsewhere specified. Also classified in accordance with: Note 3 to Section …

  • UK 7326909890 Valid Sep 23, 2026 to Sep 22, 2029 · Ruling 600016072 on GOV.UK

    A zinc-plated steel cleaning tool that has been made into a rectangular frame intended to be used as a dusting tool around pipes and ledges. The frame is attached to a pole via a threaded insert, secured in position with 3 x 6 tension pins. For use with a launderable sleeve (sold separately), the frame is designed to fit the Interchange extension handle or be used as a handheld dusting tool.

    Justification

    Classification has been determined in accordance with the following: - For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect: a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 7326 - Other articles of iron or steel. GIR 6 - Has been used to classify the goods to subheading level 732690 – Other than elsewhere specified. 8 Digit Code 73269098 – Other than open-die forged, closed-die forged or sintered. 10 Digit Code 7326909890 – Other than elsewhere specified in this heading. Also classified in accordance with: Note 3 to Section XV. Harmonized System Explanatory Notes (HSENs) to heading 7326.

  • UK 7326909890 Valid Sep 7, 2026 to Sep 6, 2029 · Ruling 600016108 on GOV.UK

    An article of steel. The frame which is made of an assembly of parts, which are made from zinc plated steel and are designed to hold the sweeper head cover. The product is to be self-assembled with a mop handle and a textile mop cover (not included in this Atar.) The product is designed for cleaning and sweeping floors part of a cleaning system. The frame size measures approx. 60.96 cm/24 inches. The product is packaged: 1 unit per carton and 10 cartons per outer carton.

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect : a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General Interpretative Rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 7326 - Other articles of iron or steel. GIR 2 A – Has been used as the goods are - Unassembled. GIR 5 B - Has been used to identify the type of packaging - 1 unit per carton and 10 cartons per outer carton. GIR 6 - Has been used to classify the goods to subheading level 7326 90 - Other than; Forged or stamped, but not further worked or Articles of iron or steel wire. 8 Digit Code: 732690 98 - Other than; Other articles of iron or steel ; Open-die forged, Closed-die forged and sintered. 10 Digit Code: 73269098 90 - Other than; Elsewhere specified within …

  • UK 7326909890 Valid Oct 1, 2026 to Sep 30, 2029 · Ruling 600016183 on GOV.UK

    Buckles for banding systems – finished fastening articles. Wide slit coils 1.2m wide are pressed. The buckles will be used to fasten the Tekduct Half Shell (Polyurethane) or Cable Protection Systems around subsea infrastructure. Packaging details Usually packed in crates

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) GIR 1 has been used to classify this product by the terms of heading 7326 - Other articles of iron or steel. GIR 5(b) has been used to identify the type of packaging. GIR 6 - has been used to classify the goods to subheading level 732690 - Other. 8 Digit Code 73269098 - Other. 10 Digit Code - 7326909890 - Other. Also classified in accordance with: Harmonised System Explanatory Notes (HSENs) to 7326.

  • UK 7326909890 Valid Oct 21, 2026 to Oct 20, 2029 · Ruling 600016444 on GOV.UK

    A shelving unit made from metal designed to be rack mounted, for use with production equipment. Supplied with the unit is a box containing a bag of screws of various lengths, 1x1/6th width and 2x 1/3rd width facia plates. On the bottom are various holes drilled or punched for screwing equipment into the base with standard rack ears at on the front of the unit which is packaged with expanded polystyrene into a cardboard box

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 7326 - Other articles of iron or steel GIR 5 (b) has been used to identify normal packaging for transport – Single use cardboard box with expanded polystyrene inner packaging GIR 6 has been used to classify the goods to sub-heading 7326 90 – Other than elsewhere specified in this heading Code to 8 digits - 7326 9098 – Other articles of iron or steel; Other than elsewhere specified in this subheading Code to 10 digits - 7326 9098 90 - Other than elsewhere specified in this subheading Also classified in accordance with :- Note 3 to section XV Harmonised …

Source: HM Revenue & Customs, Advance Tariff Rulings. Contains public sector information licensed under the Open Government Licence v3.0.

Restrictions and flags for 7326000000

  • CBAM: carbon border adjustment Regulation (EU) 2023/956, Annex I 7326

    Sector: iron and steel

    Read the act on EUR-Lex
  • Russia sanctions: import ban Regulation (EU) No 833/2014, Annex XVII 7326

    Art. 3g, iron and steel products

    Read the act on EUR-Lex
  • Russia sanctions: export ban Regulation (EU) No 833/2014, Annex XXIII 7326

    Art. 3k, goods contributing to Russian industrial capacity

    Read the act on EUR-Lex

For orientation only. Check the act before you rely on a flag; thresholds, derogations and exceptions are not shown in full.

Import VAT in the EU

  • Austria 20 %
  • Belgium 21 %
  • Bulgaria 20 %
  • Croatia 25 %
  • Cyprus 19 %
  • Czechia 21 %
  • Denmark 25 %
  • Estonia 24 %
  • Finland 25.5 %
  • France 20 %
  • Germany 19 %
  • Greece 24 % maybe 6 %, 13 %
  • Hungary 27 %
  • Ireland 23 %
  • Italy 22 %
  • Latvia 21 %
  • Lithuania 21 %
  • Luxembourg 17 %
  • Malta 18 %
  • Netherlands 21 %
  • Poland 23 %
  • Portugal 23 %
  • Romania 21 %
  • Slovakia 23 %
  • Slovenia 22 %
  • Spain 21 %
  • Sweden 25 %

Standard rate per member state, on the customs value, the duty and transport to the destination. Reduced rates often depend on the use or the buyer and apply only where the country provides them for these goods. Source: European Commission, Taxes in Europe Database, as of Nov 2, 2026.

Rules of origin

Preferential rules of origin for subheading 732600 depend on the trade agreement. The Commission publishes them in Access2Markets.

Rules of origin on Access2Markets

Information

When importing or exporting "Other articles of iron or steel", it is crucial to have the correct HS code or TARIC code. The HS code 7326000000 80 serves as the standard code for this product, ensuring that the appropriate duties and taxes are applied when crossing international borders.

To ensure your business transactions run smoothly when importing or exporting "Other articles of iron or steel", consider the following points:

  1. Inform yourself about the specific import and export regulations in the countries involved. This includes possible restrictions, taxes, and duties applicable to "Other articles of iron or steel".
  2. Check if any additional licenses, permits, or certificates are required to import "Other articles of iron or steel" into the destination country or export it from the country of origin.
  3. Make sure your trading partners have valid identification numbers, such as EORI numbers (Economic Operators Registration and Identification) in the EU, to streamline trade and minimize delays.
  4. Ensure that all trade- and customs-related documents (such as commercial invoices, packing lists, certificates of origin, and insurance policies) are accurately completed and adhere to the respective national regulations.
  5. Keep an eye on the current exchange rates, as well as packaging, shipping, and insurance costs, to accurately calculate trade costs.

In summary, the HS code or TARIC code for "Other articles of iron or steel" is 7326000000 80. Make sure you accurately use this code in all your trade and customs documents to guarantee smooth and hassle-free transactions. With these tips, you'll be better prepared for the challenges of international trade and can successfully import and export "Other articles of iron or steel".

HS Code structure

73
Chapter
26
Heading
00
Subheading
00
CN Subheading
00
TARIC Subheading
80
Additional TARIC codes

1. Chapter

There are 21 different sections, which are divided into 96 chapters. Exceptional chapters include chapter 77, which is reserved for future use, chapters 98 and 99, which are limited at national level, and chapter 99, which is a specific code for temporary changes. In the example above, chapter 73 was selected for articles of iron or steel

2. Heading

The heading determines the specific category within a certain chapter. In the example above, the 26 refers to Other articles of iron or steel.

HS Code tree structure

7300000000 80

Chapter ARTICLES OF IRON OR STEEL

7326000000 80

Other articles of iron or steel

7326110000 10

- Forged or stamped, but not further worked

7326110000 80

- - Grinding balls and similar articles for mills

7326190000 80

- - Other

7326191000 80

- - - Open-die forged

7326199000 80

- - - Other

7326200000 80

- Articles of iron or steel wire

7326200010 80

- - For use in civil aircraft

7326200020 80

- - Metal fleece, consisting of a mass of stainless steel wires of diameters of 0,001 mm or more but not more than 0,070 mm, compacted by sintering and rolling

7326200090 80

- - Other

7326900000 80

- Other

7326903000 80

- - Ladders and steps

7326904000 80

- - Pallets and similar platforms for handling goods

7326905000 80

- - Reels for cables, piping and the like

7326906000 80

- - Non-mechanical ventilators, guttering, hooks and like articles used in the building industry

7326909200 10

- - Other articles of iron or steel

7326909200 80

- - - Open-die forged

7326909210 80

- - - - Collars, flanges and other devices for fixing, jointing, clamping or spacing, for use in certain types of aircraft

7326909220 80

- - - - Devices for cargo stowage and clamping freight, for use in certain types of aircraft

7326909230 80

- - - - Balls used in freight loading systems in certain types of aircraft

7326909290 80

- - - - Other

7326909400 80

- - - Closed-die forged

7326909410 80

- - - - Collars, flanges and other devices for fixing, jointing, clamping or spacing, for use in certain types of aircraft

7326909420 80

- - - - Devices for cargo stowage and clamping freight, for use in certain types of aircraft

7326909430 80

- - - - Balls used in freight loading systems in certain types of aircraft

7326909490 80

- - - - Other

7326909600 80

- - - Sintered

7326909610 80

- - - - Collars, flanges and other devices for fixing, jointing, clamping or spacing, for use in certain types of aircraft

7326909620 80

- - - - Devices for cargo stowage and clamping freight, for use in certain types of aircraft

7326909630 80

- - - - Ball bearings used in freight loading systems in certain types of aircraft

7326909690 80

- - - - Other

7326909800 80

- - - Other

7326909810 80

- - - - Collars, flanges and other devices for fixing, jointing, clamping or spacing, for use in certain types of aircraft

7326909820 80

- - - - Devices for cargo stowage and clamping freight, for use in certain types of aircraft

7326909830 80

- - - - Ball bearings used in freight loading systems in certain types of aircraft

7326909840 80

- - - - Iron, steel and/or zinc alloy weights: -with a weight of not more than 500 grams and measuring not more than 107 mm x 107 mm x 11 mm, -whether or not with parts of other material, -whether or not with parts of other metals, -whether or not surface treated, -whether or not printed, of a kind used for the production of remote controls

7326909860 80

- - - - Vane ring of a kind for fastening gas flow control blades:  -of iron or steel alloy, -with a heat resistance of 830 °C or more but not more than 1 050 °C, -with an external diameter of not more than 92 mm, -with holes for holding the gas flow control blades, for use in the manufacture of turbochargers

7326909870 80

- - - - Disc of a kind for ensuring the gas flow channel width:  -of iron or steel alloy, -with a heat resistance of 830 °C or more but not more than 1 050 °C, -with an external diameter of not more than 92,5 mm, -with an internal diameter of not more than 62 mm, for use in the manufacture of turbochargers

7326909890 80

- - - - Other