Import trade restrictions for 7601200000 80
Duties for more codes with a free account
You have looked at the duties of 10 codes today. Sign up free to see duties, measures and history for every code.
Preferential rules of origin for 7601200000
What the goods must meet to count as originating in a partner country and get the preferential duty, per agreement.
Autonomous Trade Preferences (Western Balkans) · Kosovo
EU-Chile Association Agreement · Chile
EU-Algeria Association Agreement · Algeria
EEA/EFTA agreements (Switzerland, Norway, Liechtenstein, Faroe Islands) · Faroe Islands, Liechtenstein, Norway, Switzerland
EU-Egypt Association Agreement · Egypt
EU-Georgia DCFTA · Georgia
EU-Jordan Association Agreement · Jordan
EU-Central America Association Agreement
EU-Morocco Association Agreement · Morocco
EU-Moldova DCFTA · Moldova
Pan-Euro-Mediterranean (PEM) Convention · Albania, Andorra, Bosnia & Herzegovina, Egypt, Faroe Islands, Iceland, Kosovo, Liechtenstein, Montenegro, North Macedonia, Norway, Palestine, Switzerland, Türkiye
EU-Tunisia Association Agreement · Tunisia
EU-Ukraine DCFTA · Ukraine
Unwrought aluminium / or: Manufacture: from materials of any heading, except that of the product, and in which the value of all the materials used does not exceed 50 % of the ex-works price of the product or Manufacture by thermal or electrolytic treatment from unalloyed aluminium or waste and scrap of aluminium
Generalised Scheme of Preferences (GSP, GSP+, EBA) · Armenia, India, Kenya, Pakistan, Samoa, Solomon Islands, Syria, Vietnam
EU-Jordan Association Agreement (relaxed rules, 2016) · Jordan
EU-Singapore FTA · Singapore
Unwrought aluminium / or: Manufacture from materials of any heading
EU-Israel Association Agreement · Israel
EU-Mexico Global Agreement · Mexico
EU-Palestine Interim Association Agreement · Palestine
Unwrought aluminium / or: Manufacture by thermal or electrolytic treatment from unalloyed aluminium or waste and scrap of aluminium
EPA CARIFORUM
EPA Pacific · Fiji, Papua New Guinea, Samoa, Solomon Islands
Unwrought aluminium / or: Manufacture in which: – all the materials used are classified within a heading other than that of the product; and – the value of all the materials used does not exceed 50 % of the ex-works price of the product / or: Manufacture by thermal or electrolytic treatment from unalloyed aluminium or waste and scrap of aluminium
EU-Canada CETA · Canada
A change from within any one of these subheadings or any other subheading.
EU-Colombia/Peru/Ecuador Trade Agreement · Colombia, Ecuador, Peru
Unwrought aluminium / or: Manufacture: from materials of any heading, except that of the product, and in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product or Manufacture by thermal or electrolytic treatment from unalloyed aluminium or waste and scrap of aluminium
EPA Eastern and Southern Africa
Aluminium waste or scrap / or: Manufacture in which all the materials used are classified within a heading other than that of the product
EU Market Access Regulation (EPA) · Cameroon, Côte d’Ivoire, Ghana, Kenya
Unwrought aluminium / or: Manufacture in which: all the materials used are classified within a heading other than that of the product; and the value of all the materials used does not exceed 50 % of the ex-works price of the product or Manufacture by thermal or electrolytic treatment from unalloyed aluminium or waste and scrap of aluminium
EU-Iceland FTA · Iceland
Unwrought aluminium / or: Manufacture: – from materials of any heading, except that of the product, and – in which the value of all the materials used does not exceed 50 % of the ex-works price of the product or Manufacture by thermal or electrolytic treatment from unalloyed aluminium or waste and scrap of aluminium
EU-Japan EPA · Japan
CTSH
EU-Korea FTA · South Korea
Unwrought aluminium / or: Manufacture from materials of any heading, except that of the product or Manufacture by thermal or electrolytic treatment from unalloyed aluminium or waste and scrap of aluminium
EU-Lebanon Association Agreement · Lebanon
Unwrought aluminium / or: Manufacture: from materials of any heading, except that of the product, in which the value of all the materials used does not exceed 50 % of the ex-works price of the product or Manufacture by thermal or electrolytic treatment from unalloyed aluminium or waste and scrap of aluminium
EPA SADC · South Africa
Unwrought aluminium / or: Manufacture in which: all the materials used are classified within a heading other than that of the product; and the value of all the materials used does not exceed 50 % of the ex–works price of the product / or: Manufacture by thermal or electrolytic treatment from unalloyed aluminium or waste and scrap of aluminium
EU-Viet Nam FTA · Vietnam
unwrought aluminium; / or: Manufacture from materials of any heading.
Source: European Commission, Access2Markets (CC BY 4.0, shortened). The text of the agreement prevails. Access2Markets
Legal and explanatory notes for 7601200000
Notes to chapter 76
Subheading notes Additional notes 1. For the purposes of subheadings 7601 10 10, 7601 20 30 and 7601 20 40, the following terms shall have the meaning hereby assigned to them: — ‘slabs’: unwrought products which have a uniform solid cross-section along their whole length in the shape of a rectangle or other polygon, of a width exceeding 800 mm, of a thickness exceeding 280 mm and of a length always superior to the width and to the thickness. These products are intended for being rolled; — ‘billets’: unwrought products which have a uniform solid cross-section along their whole length in the shape of a circle (including a ‘flattened circle’), of a diameter exceeding 125 mm. 2. For the purposes of subheadings 7606 12 11 and 7606 12 19, the following terms shall have the meaning hereby assigned to them: — ‘beverage can body stock’: sheets or strips in coils, rolled, having manganese and magnesium as main alloying elements and having a minimum tensile strength of 262 MPa. The sheets or strips have a uniform solid cross-section along their whole length, are of a width of 300 mm or more but not more than 2 000 mm, of a thickness exceeding 0,2 mm but not exceeding 0,4 mm, and of a length always superior to the width and to the thickness. Beverage can body stock is prelubricated, with a bright surface; — ‘beverage can end stock and tab stock’: sheets or strips in coils, having magnesium as the main alloying element and having a minimum tensile strength 345 MPa. The sheets or strips have a uniform solid cross-section along their whole length, are of a width of 30 mm or more but not more than 2 000 mm, of a thickness exceeding 0,2 mm but not exceeding 0,35 mm, and of a length always superior to the width and to the thickness. Beverage can end stock is varnished on both sides. Beverage can tab stock is degreased and oiled. These products are to be used for the fabrication of rigid beverage cans, including ends (lids) and tabs. 3. For the purposes of subheadings 7606 11 30, 7606 12 30 and 7607 20 91, the following term shall have the meaning hereby assigned to it: — ‘Aluminium Composite Panel’: laminated goods consisting of two flat-rolled sheets or foils of aluminium, whether or not alloyed, each of them having a thickness of not less than 0,08 mm but not exceeding 0,55 mm, and a continuous core of non-porous polymer or mineral material, held together with an adhesive, all together having a thickness of 1,0 mm or more, but not exceeding 6,1 mm. The two external aluminium cover sheets or foils can have different finishes. These goods cannot be coiled.
Sources: Combined Nomenclature 2026, Annex I to Regulation (EEC) No 2658/87 (CELEX 32025R1926), and the Explanatory Notes to the Combined Nomenclature (CELEX 02019XC0329(02)-20260213). The section and chapter notes are legally binding; the explanatory notes are guidance. EUR-Lex
UK advance tariff rulings for 7601200000
Rulings of HM Revenue & Customs for goods with UK commodity codes that start like this EU code. The UK tariff differs from the EU tariff, so these rulings are guidance for the EU.
- UK 7601203000 Valid Jan 20, 2025 to Jan 19, 2028 · Ruling 600012088 on GOV.UK
Solid slabs of cast alloyed aluminium not further worked other than being cut to length for customer requirements. Dimensions vary but are typically between 280-525mm in thickness with a width of between 800 and 1500mm and 7metres in length. Material is packed on a wooden cases/supports and often wrapped in plastic covering for further protection from the elements.
Justification
Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 7601 - Unwrought aluminium GIR 5 (b) has been used to identify normal packaging for transport GIR 6 has been used to classify the goods to sub-heading 7601 20 – Aluminium alloys Code to 8 digits - 7601 2030 – Slabs Also classified in accordance with :- Harmonised Standard Explanatory Notes (HSENs) to heading – 7601 Subheading note 1 to chapter 76 Additional note 1 to chapter 76
Source: HM Revenue & Customs, Advance Tariff Rulings. Contains public sector information licensed under the Open Government Licence v3.0.
Restrictions and flags for 7601200000
- CBAM: carbon border adjustment Regulation (EU) 2023/956, Annex I 7601
Sector: aluminium
Read the act on EUR-Lex - Russia sanctions: import ban Regulation (EU) No 833/2014, Annex XXI 7601
Art. 3i, goods generating significant revenue for Russia
Read the act on EUR-Lex - Dual-use goods Regulation (EU) 2021/821, Annex I 76012030
Covers only part of the goods under this code (act names 76012030).
May be dual-use; check the Annex I entry 1C002b (correlation table is non-binding)
Read the act on EUR-Lex - Dual-use goods Regulation (EU) 2021/821, Annex I 76012040
Covers only part of the goods under this code (act names 76012040).
May be dual-use; check the Annex I entry 1C002b (correlation table is non-binding)
Read the act on EUR-Lex - Dual-use goods Regulation (EU) 2021/821, Annex I 76012080
Covers only part of the goods under this code (act names 76012080).
May be dual-use; check the Annex I entry 1C002b, 1C002d (correlation table is non-binding)
Read the act on EUR-Lex
For orientation only. Check the act before you rely on a flag; thresholds, derogations and exceptions are not shown in full. The dual-use table links codes to control list entries and is non-binding.
Tariff quotas for 7601200000
- Open 09.8262 Origin: Russia
Exception to sanctions against Russia - HS 7601 (Aluminium)
Feb 26, 2026 – Dec 31, 2026
16,219,568 KilogramsBalance left (32.4%)Volume 50,000,000
Source: European Commission, tariff quota reports, as of Oct 30, 2026. Balances change daily.
EU trade in 2025 for 7601200000
- Extra-EU imports
- €8.5B
- 3,140,311 t
- Extra-EU exports
- €964.1M
Top origin countries by import value
Norway €3.5B
Iceland €1B
United Arab Emirates €910.1M
Bahrain €822.4M
United Kingdom €460.8M
Figures for CN8 code 76012000. Source: Eurostat, Comext, CC BY 4.0, processed by hscode.info. Confidential trade is not allocated to codes.
Tariff changes for 7601200000 since 2016
- Jan 2023 7601202000 Code removed
- Jan 2023 2 codes Code added
- Jan 2022 2 codes Code removed
Month-by-month comparison of the European Commission’s TARIC extractions. Seasonal entry prices left out.
UK import duty for 760120
- 6%
Third-country duties of all UK commodity codes under this HS subheading. Source: UK Department for Business and Trade, as of Nov 2, 2026. The UK tariff differs from the EU tariff.
Import VAT in the EU
- Austria 20 %
- Belgium 21 %
- Bulgaria 20 %
- Croatia 25 %
- Cyprus 19 %
- Czechia 21 %
- Denmark 25 %
- Estonia 24 %
- Finland 25.5 %
- France 20 %
- Germany 19 %
- Greece 24 %
- Hungary 27 %
- Ireland 23 %
- Italy 22 %
- Latvia 21 %
- Lithuania 21 %
- Luxembourg 17 %
- Malta 18 %
- Netherlands 21 %
- Poland 23 %
- Portugal 23 %
- Romania 21 %
- Slovakia 23 %
- Slovenia 22 %
- Spain 21 %
- Sweden 25 %
Standard rate per member state, on the customs value, the duty and transport to the destination. Reduced rates often depend on the use or the buyer and apply only where the country provides them for these goods. Source: European Commission, Taxes in Europe Database, as of Nov 2, 2026.
Rules of origin
Preferential rules of origin for subheading 760120 depend on the trade agreement. The Commission publishes them in Access2Markets.
Rules of origin on Access2MarketsInformation
When importing or exporting "Aluminium alloys", it is crucial to have the correct HS code or TARIC code. The HS code 7601200000 80 serves as the standard code for this product, ensuring that the appropriate duties and taxes are applied when crossing international borders.
To ensure your business transactions run smoothly when importing or exporting "Aluminium alloys", consider the following points:
- Inform yourself about the specific import and export regulations in the countries involved. This includes possible restrictions, taxes, and duties applicable to "Aluminium alloys".
- Check if any additional licenses, permits, or certificates are required to import "Aluminium alloys" into the destination country or export it from the country of origin.
- Make sure your trading partners have valid identification numbers, such as EORI numbers (Economic Operators Registration and Identification) in the EU, to streamline trade and minimize delays.
- Ensure that all trade- and customs-related documents (such as commercial invoices, packing lists, certificates of origin, and insurance policies) are accurately completed and adhere to the respective national regulations.
- Keep an eye on the current exchange rates, as well as packaging, shipping, and insurance costs, to accurately calculate trade costs.
In summary, the HS code or TARIC code for "Aluminium alloys" is 7601200000 80. Make sure you accurately use this code in all your trade and customs documents to guarantee smooth and hassle-free transactions. With these tips, you'll be better prepared for the challenges of international trade and can successfully import and export "Aluminium alloys".
HS Code structure
1. Chapter
There are 21 different sections, which are divided into 96 chapters. Exceptional chapters include chapter 77, which is reserved for future use, chapters 98 and 99, which are limited at national level, and chapter 99, which is a specific code for temporary changes. In the example above, chapter 76 was selected for aluminium and articles thereof
2. Heading
The heading determines the specific category within a certain chapter. In the example above, the 01 refers to Unwrought aluminium.
3. Subheading
The last two digits of the international harmonized code are more specific and define subcategories of products. In the example above, the 20 refers to Aluminium alloys.
HS Code tree structure
7600000000 80
Chapter ALUMINIUM AND ARTICLES THEREOF
7601000000 80
Unwrought aluminium
7601100000 80
- Aluminium, not alloyed
7601101000 80
- - Slabs
7601109000 80
- - Other
7601200000 80
- Aluminium alloys
7601203000 80
- - Slabs
7601204000 80
- - Billets
7601208000 80
- - Other