New Describe a product, get the CN code. Also as API and MCP for AI agents. Try it free
Jump to content

Tariff number 7616991091 10 - Other

Email me changes

Import trade restrictions for 7616991091 10

This table contains information on trade restrictions for the import of goods into the EU and the EU into third countries. The table contains information on trade restrictions which are imposed due to customs unions, preferences, tariff quotas, customs unions, veterinary controls, third country duties and non-preferential tariff quotas.

Duties 92
GB
United Kingdom GB
01-01-2025
0 %
Preferential tariff quota 143
1011
ERGA OMNES 1011
01-01-1999
6 %
Third country duty 103
MK
North Macedonia MK
01-01-2009
0 %
Tariff preference 142
BA
Bosnia and Herzegovina BA
01-01-2009
0 %
Tariff preference 142
2027
GSP+ (incentive arrangement for sustainable development and good governance) 2027
01-01-2014
0 %
Tariff preference 142
EC
Ecuador EC
01-01-2017
0 %
Tariff preference 142
2020
GSP - General arrangements 2020
01-01-2017
2.5 %
Tariff preference 142
UA
Ukraine UA
01-01-2021
0 %
Tariff preference 142
XS
Serbia XS
01-02-2010
0 %
Tariff preference 142
PE
Peru PE
01-03-2013
0 %
Tariff preference 142
AL
Albania AL
01-04-2009
0 %
Tariff preference 142
XK
Kosovo XK
01-04-2016
0 %
Tariff preference 142
ME
Montenegro ME
01-05-2010
0 %
Tariff preference 142
NZ
New Zealand NZ
01-05-2024
0 %
Tariff preference 142
CO
Colombia CO
01-08-2013
0 %
Tariff preference 142
2200
Central America 2200
01-08-2013
0 %
Tariff preference 142
1011
ERGA OMNES 1011
01-11-2018
0 %
Airworthiness tariff suspension 119
ZA
South Africa ZA
10-10-2016
0 %
Tariff preference 142
AM
Armenia AM
10-10-2026
– 11-10-2028
0 %
Tariff preference 142
1006
EU-Canada agreement: re-imported goods 1006
21-09-2017
0 %
Tariff preference 142
CA
Canada CA
21-09-2017
0 %
Tariff preference 142
VN
Viet Nam VN
01-01-2023
0 %
Tariff preference 142
JP
Japan JP
01-02-2020
0 %
Tariff preference 142
5500
Mercosur 5500
01-05-2026
– 31-12-2026
4.8 %
Tariff preference 142
CN
China CN
Zhejiang Flyhigh Metal Products Co., Ltd
16-10-2024
12.6 %
with D008, otherwise 61.4 %
Definitive anti-dumping duty 552
CN
China CN
Metal Group Co. Ltd
16-10-2024
56.2 %
with D008, otherwise 61.4 %
Definitive anti-dumping duty 552
CN
China CN
Jinyun Shengda Industry Co., Ltd
16-10-2024
21.2 %
with D008, otherwise 61.4 %
Definitive anti-dumping duty 552
CN
China CN
Ningbo Ephraim Radiator Equipment Co., Ltd.
16-10-2024
21.2 %
with D008, otherwise 61.4 %
Definitive anti-dumping duty 552
CN
China CN
Ningbo Everfamily Radiator Co., Ltd
16-10-2024
21.2 %
with D008, otherwise 61.4 %
Definitive anti-dumping duty 552
CN
China CN
Ningbo Ningshing Kinhil Industrial Co. Ltd.
16-10-2024
21.2 %
with D008, otherwise 61.4 %
Definitive anti-dumping duty 552
CN
China CN
Ningbo Ninhshing Kinhil International Co., Ltd.
16-10-2024
21.2 %
with D008, otherwise 61.4 %
Definitive anti-dumping duty 552
CN
China CN
Sira (Tianjin) Aluminium Products Co., Ltd
16-10-2024
14.9 %
with D008, otherwise 61.4 %
Definitive anti-dumping duty 552
CN
China CN
Sira Group (Tianjin) Heating Radiators Co., Ltd.
16-10-2024
14.9 %
with D008, otherwise 61.4 %
Definitive anti-dumping duty 552
CN
China CN
Yongkang Jinbiao Machine Electric Co., Ltd
16-10-2024
21.2 %
with D008, otherwise 61.4 %
Definitive anti-dumping duty 552
CN
China CN
Yongkang Sanghe Radiator Co., Ltd.
16-10-2024
21.2 %
with D008, otherwise 61.4 %
Definitive anti-dumping duty 552
CN
China CN
Zhejiang Aishuibao Piping Systems Co., Ltd
16-10-2024
21.2 %
with D008, otherwise 61.4 %
Definitive anti-dumping duty 552
CN
China CN
Zhejiang Botai Tools Co., Ltd
16-10-2024
21.2 %
with D008, otherwise 61.4 %
Definitive anti-dumping duty 552
CN
China CN
Zhejiang East Industry Co., Ltd
16-10-2024
21.2 %
with D008, otherwise 61.4 %
Definitive anti-dumping duty 552
CN
China CN
Zhejiang Guangying Machinery Co., Ltd
16-10-2024
21.2 %
with D008, otherwise 61.4 %
Definitive anti-dumping duty 552
CN
China CN
Zhejiang Kangfa Industry & Trading Co., Ltd.
16-10-2024
21.2 %
with D008, otherwise 61.4 %
Definitive anti-dumping duty 552
CN
China CN
Zhejiang Liwang Industrial and Trading Co., Ltd.
16-10-2024
21.2 %
with D008, otherwise 61.4 %
Definitive anti-dumping duty 552
CN
China CN
Zhejiang Ningshuai Industry Co., Ltd
16-10-2024
21.2 %
with D008, otherwise 61.4 %
Definitive anti-dumping duty 552
CN
China CN
Zhejiang Rongrong Industrial Co., Ltd.
16-10-2024
21.2 %
with D008, otherwise 61.4 %
Definitive anti-dumping duty 552
CN
China CN
Zhejiang Yuanda Machinery & Electrical Manufacturing Co., Ltd
16-10-2024
21.2 %
with D008, otherwise 61.4 %
Definitive anti-dumping duty 552
CN
China CN
Other
16-10-2024
61.4 %
Definitive anti-dumping duty 552
1011
ERGA OMNES 1011
01-07-2016
0 %
Suspension - goods for certain categories of ships, boats and other vessels and for drilling or production platforms 117
TR
Türkiye TR
12-05-2012
Anti-dumping/countervailing duty - Control 570
1011
ERGA OMNES 1011
20-07-2016
Anti-dumping/countervailing statistic 566
FO
Faroe Islands FO
01-01-1997
0 %
Tariff preference 142
XL
Melilla XL
01-01-1999
0 %
Accession act0001/85
Tariff preference 142
PS
Occupied palestinian Territory PS
01-01-2001
0 %
Tariff preference 142
SM
San Marino SM
01-01-2006
0 %
Customs union duty 106
TR
Türkiye TR
01-01-2006
0 %
Customs union duty 106
AD
Andorra AD
01-01-2006
0 %
Customs union duty 106
1007
EU-Switzerland agreement: re-imported goods 1007
01-01-2007
0 %
Tariff preference 142
2005
GSP-EBA (Special arrangement for the least-developed countries - Everything But Arms) 2005
01-01-2014
0 %
Tariff preference 142
MD
Moldova, Republic of MD
01-01-2016
0 %
Tariff preference 142
GB
United Kingdom GB
01-01-2021
0 %
Tariff preference 142
2080
OCTs (Overseas Countries and Territories) 2080
01-01-2021
0 %
Tariff preference 142
SG
Singapore SG
01-01-2027
0 %
Tariff preference 142
GH
Ghana GH
01-01-2027
0 %
Tariff preference 142
CL
Chile CL
01-02-2025
0 %
Tariff preference 142
TN
Tunisia TN
01-03-1998
0 %
Tariff preference 142
MA
Morocco MA
01-03-2000
0 %
Tariff preference 142
LB
Lebanon LB
01-04-2006
0 %
Tariff preference 142
JO
Jordan JO
01-05-2002
0 %
Tariff preference 142
EG
Egypt EG
01-06-2004
0 %
Tariff preference 142
XC
Ceuta XC
01-07-1991
0 %
Accession act0001/85
Tariff preference 142
2012
EEA - European Economic Area 2012
01-07-2007
0 %
Tariff preference 142
KR
Korea, Republic of (South Korea) KR
01-07-2011
0 %
Tariff preference 142
MX
Mexico MX
01-07-2016
0 %
Tariff preference 142
KE
Kenya KE
01-07-2024
0 %
Tariff preference 142
US
United States US
01-07-2026
0 %
Tariff preference 142
SY
Syria SY
01-08-1994
0 %
Tariff preference 142
DZ
Algeria DZ
01-09-2005
0 %
Tariff preference 142
GE
Georgia GE
01-09-2014
0 %
Tariff preference 142
1011
ERGA OMNES 1011
01-11-2026
2 EUR
Union handling fee 800
1011
ERGA OMNES 1011
01-11-2026
3 EUR
Low-value consignment customs duty 107
CI
Ivory Coast CI
02-12-2019
0 %
Tariff preference 142
2000
Preferential origin in accordance with the Agreement in the form of an Exchange of Letters between the European Union and the Kingdom of Morocco on the amendment of Protocols 1 and 4 to the Euro-Mediterranean Agreement establishing an association between the European Communities and their Member States, of the one part, and the Kingdom of Morocco, of the other part. 2000
03-10-2025
0 %
Tariff preference 142
CM
Cameroon CM
04-08-2014
0 %
Tariff preference 142
1035
SADC EPA 1035
10-10-2016
0 %
Tariff preference 142
1034
Eastern and Southern Africa States 1034
14-05-2012
0 %
Tariff preference 142
GH
Ghana GH
15-12-2016
– 31-12-2026
0 %
Tariff preference 142
IL
Israel IL
16-05-2023
0 %
Tariff preference 142
SB
Solomon Islands SB
17-05-2020
0 %
Tariff preference 142
CH
Switzerland CH
20-12-1972
0 %
Tariff preference 142
PG
Papua New Guinea PG
20-12-2009
0 %
Tariff preference 142
SG
Singapore SG
21-11-2019
– 31-12-2026
0 %
Tariff preference 142
FJ
Fiji FJ
28-07-2014
0 %
Tariff preference 142
1033
CARIFORUM 1033
29-12-2008
0 %
Tariff preference 142
WS
Samoa WS
31-12-2018
0 %
Tariff preference 142
Controls and documents 5
1008
All third countries 1008
01-01-2026
– 31-12-2026
Document required
banned without it
Carbon Border Adjustment Mechanism - CBAM 775
KP
North Korea (Democratic People’s Republic of Korea) KP
01-09-2017
Document required
banned without it
Import control 714
KP
North Korea (Democratic People’s Republic of Korea) KP
01-09-2017
Document required
banned without it
Import control on restricted goods and technologies 711
UA
Ukraine UA
24-06-2026
Document required
banned without it
Import control 762
UA
Ukraine UA
24-06-2026
Document required
banned without it
Import control 760

Explanation of trade restrictions

Erga Omnes means "for all".

Third countries are countries that are not part of the EU.

GSP means "Generalised System of Preferences".

GSP Plus means "Generalised System of Preferences Plus".

European Economic Area (EEA) means all EU member states and Iceland, Liechtenstein and Norway.

OCTs stands for "Overseas Countries and Territories". They are countries and territories that are not part of the EU. More information

CARIFORUM is a regional economic integration organisation comprising 15 Caribbean Community (CARICOM) countries and the Dominican Republic.

SADC EPA stands for "Southern African Development Community - Economic Partnership Agreement".

Duty means "customs duties".

Estimate the import cost for 7616991091

  • Customs value €1,000.00
  • Customs duty 6 % €60.00
  • Definitive anti-dumping duty 12.6 % to 61.4 %, depending on the producer or certificate not included
  • Import VAT 19 % €201.40
  • Total €1,261.40

Specific duties (per kg, per item) and rates that depend on the producer are not in the total.

May be lower under conditions:

  • Airworthiness tariff suspension: 0 %
  • Suspension - goods for certain categories of ships, boats and other vessels and for drilling or production platforms: 0 %

Documents and checks for China

An estimate only. The customs value is the price including transport and insurance to the EU border. Excise duties, other fees and producer-specific anti-dumping rates are not included. Preferential rates need valid proof of origin. Country groups and exclusions: TARIC, as of November 2026.

Export measures for 7616991091

What applies when these goods leave the EU: export controls, dual-use and other authorisations, bans per destination and the supplementary unit of the export declaration.

Measures 1
KP
North Korea (Democratic People’s Republic of Korea) KP
28-02-2018
Export prohibition 278
Controls and documents 9
KP
North Korea (Democratic People’s Republic of Korea) KP
01-09-2017
Document required
banned without it
Export control 709
RU
Russian Federation RU
22-10-2025
Document required
banned without it
Export control 709
KP
North Korea (Democratic People’s Republic of Korea) KP
01-09-2017
Document required
banned without it
Export control on restricted goods and technologies 717
1008
All third countries 1008
15-11-2025
Document required
banned without it
Export authorization (Dual use) 478
RU
Russian Federation RU
24-06-2023
Document required
banned without it
Export control 767
BY
Belarus BY
25-02-2025
Document required
banned without it
Export control 767
BY
Belarus BY
20-07-2025
Document required
banned without it
Export control 766
UA
Ukraine UA
25-02-2025
Document required
banned without it
Export control 709
UA
Ukraine UA
25-08-2022
Document required
banned without it
Export control 767

History

Duty rates and measures for this code over time (yearly snapshots).

Preferential rules of origin for 7616991091

What the goods must meet to count as originating in a partner country and get the preferential duty, per agreement.

  • Autonomous Trade Preferences (Western Balkans) · Kosovo

    EU-Chile Association Agreement · Chile

    EU-Algeria Association Agreement · Algeria

    EEA/EFTA agreements (Switzerland, Norway, Liechtenstein, Faroe Islands) · Faroe Islands, Liechtenstein, Norway, Switzerland

    EU-Egypt Association Agreement · Egypt

    EU-Georgia DCFTA · Georgia

    EU-Jordan Association Agreement · Jordan

    EU-Central America Association Agreement

    EU-Morocco Association Agreement · Morocco

    EU-Moldova DCFTA · Moldova

    Pan-Euro-Mediterranean (PEM) Convention · Albania, Andorra, Bosnia & Herzegovina, Egypt, Faroe Islands, Iceland, Kosovo, Liechtenstein, Montenegro, North Macedonia, Norway, Palestine, Switzerland, Türkiye

    EU-Tunisia Association Agreement · Tunisia

    EU-Ukraine DCFTA · Ukraine

    Aluminium articles other than gauze, cloth, grill, netting, fencing, reinforcing fabric and similar materials (including endless bands) of aluminium wire, and expanded metal of aluminium / or: Manufacture: from materials of any heading, except that of the product. However, gauze, cloth, grill, netting, fencing, reinforcing fabric and similar materials (including endless bands) of aluminium wire, or expanded metal of aluminium may be used; and in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

  • Generalised Scheme of Preferences (GSP, GSP+, EBA) · Armenia, India, Kenya, Pakistan, Samoa, Solomon Islands, Syria, Vietnam

    EU-Jordan Association Agreement (relaxed rules, 2016) · Jordan

    EU-Singapore FTA · Singapore

    Aluminium and articles thereof; except for: / or: Manufacture from materials of any heading, except that of the product

  • EPA CARIFORUM

    EPA Pacific · Fiji, Papua New Guinea, Samoa, Solomon Islands

    Aluminium articles other than gauze, cloth, grill, netting, fencing, reinforcing fabric and similar materials (including endless bands) of aluminium wire, and expanded metal of aluminium / or: Manufacture in which: – all the materials used are classified within a heading other than that of the product. However, gauze, cloth, grill, netting, fencing, reinforcing fabric and similar materials (including endless bands) of aluminium wire, or expanded metal of aluminium may be used; – the value of all the materials used does not exceed 50 % of the ex-works price of the product

  • EU-Canada CETA · Canada

    A change from any other heading.

  • EU-Colombia/Peru/Ecuador Trade Agreement · Colombia, Ecuador, Peru

    Aluminium articles other than gauze, cloth, grill, netting, fencing, reinforcing fabric and similar materials (including endless bands) of aluminium wire, and expanded metal of aluminium / or: Manufacture: from materials of any heading, except that of the product. However, gauze, cloth, grill, netting, fencing, reinforcing fabric and similar materials (including endless bands) of aluminium wire, or expanded metal of aluminium may be used; and in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

  • EPA Eastern and Southern Africa

    Reserved for possible future use in HS

  • EU Market Access Regulation (EPA) · Cameroon, Côte d’Ivoire, Ghana, Kenya

    Aluminium articles other than gauze, cloth, grill, netting, fencing, reinforcing fabric and similar materials (including endless bands) of aluminium wire, and expanded metal of aluminium / or: Manufacture in which: all the materials used are classified within a heading other than that of the product. However, gauze, cloth, grill, netting, fencing, reinforcing fabric and similar materials (including endless bands) of aluminium wire, or expanded metal of aluminium may be used; the value of all the materials used does not exceed 50 % of the ex-works price of the product

  • EU-Israel Association Agreement · Israel

    Aluminium articles other than gauze, cloth, grill, netting, fencing, reinforcing fabric and similar materials (including endless bands) of aluminium wire, and expanded metal of aluminium / or: Manufacture in which: all the materials used are classified within a heading other than that of the product. However, gauze, cloth, grill, netting, fencing, reinforcing fabric and similar materials (including endless bands) of aluminium wire, or expanded metal of aluminium may be used, and the value of all the materials used does not exceed 50 % of the ex-works price of the product

  • EU-Iceland FTA · Iceland

    Aluminium articles other than gauze, cloth, grill, netting, fencing, reinforcing fabric and similar materials (including endless bands) of aluminium wire, and expanded metal of aluminium / or: Manufacture: – from materials of any heading, except that of the product. However, gauze, cloth, grill, netting, fencing, reinforcing fabric and similar materials (including endless bands) of aluminium wire, or expanded metal of aluminium may be used; and – in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

  • EU-Japan EPA · Japan

    CTH; MaxNOM 50 % (EXW); or RVC 55 % (FOB).

  • EU-Korea FTA · South Korea

    Other articles of aluminium / or: Manufacture from materials of any heading

  • EU-Lebanon Association Agreement · Lebanon

    Aluminium articles other than gauze, cloth, grill, netting, fencing, reinforcing fabric and similar materials (including endless bands) of aluminium wire, and expanded metal of aluminium / or: Manufacture: from materials of any heading, except that of the product. However, gauze, cloth, grill, netting, fencing, reinforcing fabric and similar materials (including endless bands) of aluminium wire, or expanded metal of aluminium may be used, in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

  • EU-Mexico Global Agreement · Mexico

    Aluminium articles other than gauze, cloth, grill, netting, fencing, reinforcing fabric and similar materials (including endless bands) of aluminium wire, and expanded metal of aluminium / or: Manufacture in which: all the materials used are classified within a heading other than that of the product. However, gauze, cloth, grill, netting, fencing, reinforcing fabric and similar materials (including endless bands) of aluminium wire, or expanded metal of aluminium may be used, the value of all the materials used does not exceed 50 % of the ex-works price of the product

  • EU-Palestine Interim Association Agreement · Palestine

    Aluminium articles other than gauze, cloth, grill, netting, fencing, reinforcing fabric and similar materials (including endless bands) of aluminium wire, and expanded metal of aluminium / or: Manufacture in which: all the materials used are classified within a heading other than that of the product. However, gauze, cloth, grill, netting, fencing, reinforcing fabric and similar materials (including endless bands) of aluminium wire, or expanded metal of aluminium may be used; the value of all the materials used does not exceed 50% of the ex-works price of the product

  • EPA SADC · South Africa

    Aluminium articles other than gauze, cloth, grill, netting, fencing, reinforcing fabric and similar materials (including endless bands) of aluminium wire, and expanded metal of aluminium / or: Manufacture in which: all the materials used are classified within a heading other than that of the product. However, gauze, cloth, grill, netting, fencing, reinforcing fabric and similar materials (including endless bands) of aluminium wire, or expanded metal of aluminium may be used; the value of all the materials used does not exceed 50 % of the ex–works price of the product

  • EU-Viet Nam FTA · Vietnam

    Aluminium and articles thereof, except: / or: Manufacture from materials of any heading, except that of the product.

Source: European Commission, Access2Markets (CC BY 4.0, shortened). The text of the agreement prevails. Access2Markets

Legal and explanatory notes for 7616991091

Notes to chapter 76

Subheading notes Additional notes 1. For the purposes of subheadings 7601 10 10, 7601 20 30 and 7601 20 40, the following terms shall have the meaning hereby assigned to them: — ‘slabs’: unwrought products which have a uniform solid cross-section along their whole length in the shape of a rectangle or other polygon, of a width exceeding 800 mm, of a thickness exceeding 280 mm and of a length always superior to the width and to the thickness. These products are intended for being rolled; — ‘billets’: unwrought products which have a uniform solid cross-section along their whole length in the shape of a circle (including a ‘flattened circle’), of a diameter exceeding 125 mm. 2. For the purposes of subheadings 7606 12 11 and 7606 12 19, the following terms shall have the meaning hereby assigned to them: — ‘beverage can body stock’: sheets or strips in coils, rolled, having manganese and magnesium as main alloying elements and having a minimum tensile strength of 262 MPa. The sheets or strips have a uniform solid cross-section along their whole length, are of a width of 300 mm or more but not more than 2 000 mm, of a thickness exceeding 0,2 mm but not exceeding 0,4 mm, and of a length always superior to the width and to the thickness. Beverage can body stock is prelubricated, with a bright surface; — ‘beverage can end stock and tab stock’: sheets or strips in coils, having magnesium as the main alloying element and having a minimum tensile strength 345 MPa. The sheets or strips have a uniform solid cross-section along their whole length, are of a width of 30 mm or more but not more than 2 000 mm, of a thickness exceeding 0,2 mm but not exceeding 0,35 mm, and of a length always superior to the width and to the thickness. Beverage can end stock is varnished on both sides. Beverage can tab stock is degreased and oiled. These products are to be used for the fabrication of rigid beverage cans, including ends (lids) and tabs. 3. For the purposes of subheadings 7606 11 30, 7606 12 30 and 7607 20 91, the following term shall have the meaning hereby assigned to it: — ‘Aluminium Composite Panel’: laminated goods consisting of two flat-rolled sheets or foils of aluminium, whether or not alloyed, each of them having a thickness of not less than 0,08 mm but not exceeding 0,55 mm, and a continuous core of non-porous polymer or mineral material, held together with an adhesive, all together having a thickness of 1,0 mm or more, but not exceeding 6,1 mm. The two external aluminium cover sheets or foils can have different finishes. These goods cannot be coiled.

Sources: Combined Nomenclature 2026, Annex I to Regulation (EEC) No 2658/87 (CELEX 32025R1926), and the Explanatory Notes to the Combined Nomenclature (CELEX 02019XC0329(02)-20260213). The section and chapter notes are legally binding; the explanatory notes are guidance. EUR-Lex

UK advance tariff rulings for 7616991091

Rulings of HM Revenue & Customs for goods with UK commodity codes that start like this EU code. The UK tariff differs from the EU tariff, so these rulings are guidance for the EU.

  • UK 7616991099 Valid Mar 13, 2026 to Mar 12, 2029 · Ruling 600014609 on GOV.UK

    The product is a pink bag charm of a children’s animated film character. It has an O shaped iron ring to hold the charm. The charm is made of moulded PVC plastic. Attached is a pink plastic wrist strap and a red carabiner made of aluminium which is used to attach the charm to a bag. The product can be used both as a bag charm and a keyring.

    Justification

    Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 7616 - Other articles of aluminium. GIR 3b - Essential character considered to be the aluminium carabiner that attached the charm to a bag. GIR 6 has been used to classify the goods to subheading level 7616 99 - Other than nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles; other than cloth, grill, netting and fencing, of aluminium wire. 8 Digit code 761699 10 – Cast 10 Digit code 76169910 99 - Other than elsewhere specified; Other than Aluminium …

  • UK 7616991099 Valid Feb 6, 2026 to Feb 5, 2029 · Ruling 600015032 on GOV.UK

    The product is a flat mop holder. It is a frame with hook and loop fitting for use with a disposable mop head and loop black flat mops. It has swivel joints and plastic ends to protect furniture. It is made from cast aluminium with polypropylene tee and strip. It is blue in colour and has a nylon central lock, steel screws and nylon velcro. For telescopic handles 40cmx80cm. It is used for cleaning floors. The flat mop holder case is 0.256 kg per piece, 10 pieces per carton. The dimensions of the carton is 42 cm x 30.5 cm x 7.5 cm.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 7616: Other articles of aluminium. GIR 5 (b) has been used to identify the type of packaging: 10 pieces per carton, the dimensions of the carton is 42 cm x 30.5 cm x 7.5 cm. GIR 6 has been used to classify the goods to subheading 761699: Other than nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles; Other than cloth, grill, netting and fencing, of aluminium wire. 8 Digit Code 76169910: Cast 10 Digit Code 7616991099: Other than elsewhere specified; …

  • UK 7616991099 Valid Jul 30, 2026 to Jul 29, 2029 · Ruling 600015602 on GOV.UK

    This ruling is for PN-002-002-2278-03 only. The Length 258.2 x Width 115.9 x Height 28.0. The weight is 2.17 Kg each. Sacrificial anodes with steel core. Composed of Cast aluminium alloy. Material Aluminium 94 – 97.5% Zinc: 2.5 – 5.75% Indium: 0.015-0.04% Cu: 0.003% max. Si: 0.12% max. Fe: 0.09% max. Used as a sacrificial anode to prevent corrosion of steel structures. Aluminium sacrificial anodes are blocks of special metal used to stop ships, offshore structures, and pipelines from rusting in seawater. The finished anodes to be fitted onto ships, offshore platforms, or pipelines, where they slowly corrode instead of the main structure — protecting it from rust. The Steel core is inserted into the mould during casting. The purpose is to provide a mechanical and electrical connection between the anode and the structure being protected. It is not part of the sacrificial anode material itself. It accounts for 1-2% of the anode volume and 1-5% of the total anode weight.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) GIR 1 has been used to classify this product by the terms of heading 7616 - Other articles of aluminium. GIR 5(b) has been used to identify the type of packaging. GIR 6 - has been used to classify the goods to subheading level 761699 - Other. 8 Digit Code 76169910 - Cast 10 Digit Code - 7616991099 - Other than elsewhere specified. Also classified in accordance with: Chapter 76 General Note (D) Subheading Notes 1(a) and (b) to Chapter 76 Section XV Note 5(a) Harmonised System Explanatory Notes (HSENs) to 7616.

+ 7 more
  • UK 7616991099 Valid Sep 7, 2026 to Sep 6, 2029 · Ruling 600016131 on GOV.UK

    Sacrificial Anodes with steel core and cast to DNV specification. Composition material is Cast aluminium alloy. The Length 258.2 x Width 115.9 x Height 35.0 – 2.67 Kg each. Aluminium 94 – 97.5% Zinc: 2.5 – 5.75% Indium: 0.015-0.04% Cu: 0.003% Si: 0.12% Fe: 0.09% The material is used as a sacrificial anode to prevent corrosion of steel structures. Aluminium sacrificial anodes are blocks of special metal used to stop ships, offshore structures, and pipelines from rusting in seawater. Mixing the metal - Pure aluminium is melted in a large furnace. Small amounts of other metals are added to give it the right protective properties. A steel bar or insert is placed inside a mould. This allows the anode to be attached to the structure it will protect. The melted aluminium mixture is poured into the mould around the steel core. The metal is left to cool and harden. Once solid, it is removed from the mould and any rough edges are cleaned up. Each anode is checked to make sure it has the correct metal mix, weight, and shape. The finished anodes are labelled and sent out to be fitted onto ships, offshore platforms, or pipelines, where they slowly corrode instead of the main structure protecting it from rust. A sacrificial anode works by corroding preferentially to the protected metal because it is more reactive, supplying electrons that prevent the steel from oxidizing. As a result, the anode gradually corrodes while the steel remains protected. Designed for cathodic protection Usually packed in crates.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) GIR 1 has been used to classify this product by the terms of heading 7616 - Other articles of aluminium. GIR 5(b) has been used to identify the type of packaging. GIR 6 - has been used to classify the goods to subheading level 761699 - Other. 8 Digit Code 76169910 - Cast 10 Digit Code - 7616991099 - Other than elsewhere specified. Also classified in accordance with: Chapter 76 General Note (D) Subheading Notes 1(a) and (b) to Chapter 76 Section XV Note 5(a) Harmonised System Explanatory Notes (HSENs) to 7616.

  • UK 7616991099 Valid Sep 15, 2026 to Sep 14, 2029 · Ruling 600016132 on GOV.UK

    Sacrificial anodes with steel core and cast to DNV specification. Composition material is Cast aluminium alloy. The Length 339.9xWidth 115.9x Height 42.5 – 4.17 Kg each. Aluminium 94 – 97.5% Zinc: 2.5 – 5.75% Indium: 0.015-0.04% Cu: 0.003% Si: 0.12% Fe: 0.09% The material is used as a sacrificial anode to prevent corrosion of steel structures. Aluminium sacrificial anodes are blocks of special metal used to stop ships, offshore structures, and pipelines from rusting in seawater. Mixing the metal - Pure aluminium is melted in a large furnace. Small amounts of other metals are added to give it the right protective properties. A steel bar or insert is placed inside a mould. This allows the anode to be attached to the structure it will protect. The melted aluminium mixture is poured into the mould around the steel core. The metal is left to cool and harden. Once solid, it is removed from the mould and any rough edges are cleaned up. Each anode is checked to make sure it has the correct metal mix, weight, and shape. The finished anodes are labelled and sent out to be fitted onto ships, offshore platforms, or pipelines, where they slowly corrode instead of the main structure protecting it from rust. A sacrificial anode works by corroding preferentially to the protected metal because it is more reactive, supplying electrons that prevent the steel from oxidizing. As a result, the anode gradually corrodes while the steel remains protected. Designed for cathodic protection Usually packed in crates

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) GIR 1 has been used to classify this product by the terms of heading 7616 - Other articles of aluminium. GIR 5(b) has been used to identify the type of packaging. GIR 6 - has been used to classify the goods to subheading level 761699 - Other. 8 Digit Code 76169910 - Cast 10 Digit Code - 7616991099 - Other than elsewhere specified. Also classified in accordance with: Chapter 76 General Note (D) Subheading Notes 1(a) and (b) to Chapter 76 Section XV Note 5(a) Harmonised System Explanatory Notes (HSENs) to 7616.

  • UK 7616991099 Valid Sep 15, 2026 to Sep 14, 2029 · Ruling 600016133 on GOV.UK

    Sacrificial anodes with steel core and cast to DNV specification. Composition material is Cast aluminium alloy. The Length 297.2 x Width 115.9 x Height 42.5 – 3.67 Kg each. Aluminium 94 – 97.5% Zinc: 2.5 – 5.75% Indium: 0.015-0.04% Cu: 0.003% Si: 0.12% Fe: 0.09% The material is used as a sacrificial anode to prevent corrosion of steel structures. Aluminium sacrificial anodes are blocks of special metal used to stop ships, offshore structures, and pipelines from rusting in seawater. Mixing the metal - Pure aluminium is melted in a large furnace. Small amounts of other metals are added to give it the right protective properties. A steel bar or insert is placed inside a mould. This allows the anode to be attached to the structure it will protect. The melted aluminium mixture is poured into the mould around the steel core. The metal is left to cool and harden. Once solid, it is removed from the mould and any rough edges are cleaned up. Each anode is checked to make sure it has the correct metal mix, weight, and shape. The finished anodes are labelled and sent out to be fitted onto ships, offshore platforms, or pipelines, where they slowly corrode instead of the main structure protecting it from rust. A sacrificial anode works by corroding preferentially to the protected metal because it is more reactive, supplying electrons that prevent the steel from oxidizing. As a result, the anode gradually corrodes while the steel remains protected. Designed for cathodic protection Usually packed in crates.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) GIR 1 has been used to classify this product by the terms of heading 7616 - Other articles of aluminium. GIR 5(b) has been used to identify the type of packaging. GIR 6 - has been used to classify the goods to subheading level 761699 - Other. 8 Digit Code 76169910 - Cast 10 Digit Code - 7616991099 - Other than elsewhere specified. Also classified in accordance with: Chapter 76 General Note (D) Subheading Notes 1(a) and (b) to Chapter 76 Section XV Note 5(a) Harmonised System Explanatory Notes (HSENs) to 7616.

  • UK 7616991099 Valid Sep 7, 2026 to Sep 6, 2029 · Ruling 600016134 on GOV.UK

    Sacrificial anodes with steel core and cast to DNV specification. Composition material is Cast aluminium alloy. The Length 339.9xWidth 115.9x Height 42.5 – 4.17 Kg each. Aluminium 94 – 97.5% Zinc: 2.5 – 5.75% Indium: 0.015-0.04% Cu: 0.003% Si: 0.12% Fe: 0.09% The material is used as a sacrificial anode to prevent corrosion of steel structures. Aluminium sacrificial anodes are blocks of special metal used to stop ships, offshore structures, and pipelines from rusting in seawater. Mixing the metal - Pure aluminium is melted in a large furnace. Small amounts of other metals are added to give it the right protective properties. A steel bar or insert is placed inside a mould. This allows the anode to be attached to the structure it will protect. The melted aluminium mixture is poured into the mould around the steel core. The metal is left to cool and harden. Once solid, it is removed from the mould and any rough edges are cleaned up. Each anode is checked to make sure it has the correct metal mix, weight, and shape. The finished anodes are labelled and sent out to be fitted onto ships, offshore platforms, or pipelines, where they slowly corrode instead of the main structure protecting it from rust. A sacrificial anode works by corroding preferentially to the protected metal because it is more reactive, supplying electrons that prevent the steel from oxidizing. As a result, the anode gradually corrodes while the steel remains protected. Designed for cathodic protection Usually packed in crates

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) GIR 1 has been used to classify this product by the terms of heading 7616 - Other articles of aluminium. GIR 5(b) has been used to identify the type of packaging. GIR 6 - has been used to classify the goods to subheading level 761699 - Other. 8 Digit Code 76169910 - Cast 10 Digit Code - 7616991099 - Other than elsewhere specified. Also classified in accordance with: Chapter 76 General Note (D) Subheading Notes 1(a) and (b) to Chapter 76 Section XV Note 5(a) Harmonised System Explanatory Notes (HSENs) to 7616.

  • UK 7616991099 Valid Sep 14, 2026 to Sep 13, 2029 · Ruling 600016135 on GOV.UK

    Sacrificial Anodes with steel core and cast to DNV specification. Composition material is Cast aluminium alloy. The Length 250 x Width 131.1 x Height 73.3 – 3.4 Kg each. Aluminium 94 – 97.5% Zinc: 2.5 – 5.75% Indium: 0.015-0.04% Cu: 0.003% Si: 0.12% Fe: 0.09% The material is used as a sacrificial anode to prevent corrosion of steel structures. Aluminium sacrificial anodes are blocks of special metal used to stop ships, offshore structures, and pipelines from rusting in seawater. Mixing the metal - Pure aluminium is melted in a large furnace. Small amounts of other metals are added to give it the right protective properties. A steel bar or insert is placed inside a mould. This allows the anode to be attached to the structure it will protect. The melted aluminium mixture is poured into the mould around the steel core. The metal is left to cool and harden. Once solid, it is removed from the mould and any rough edges are cleaned up. Each anode is checked to make sure it has the correct metal mix, weight, and shape. The finished anodes are labelled and sent out to be fitted onto ships, offshore platforms, or pipelines, where they slowly corrode instead of the main structure protecting it from rust. A sacrificial anode works by corroding preferentially to the protected metal because it is more reactive, supplying electrons that prevent the steel from oxidizing. As a result, the anode gradually corrodes while the steel remains protected. Designed for cathodic protection Usually packed in crates.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) GIR 1 has been used to classify this product by the terms of heading 7616 - Other articles of aluminium. GIR 5(b) has been used to identify the type of packaging. GIR 6 - has been used to classify the goods to subheading level 761699 - Other. 8 Digit Code 76169910 - Cast 10 Digit Code - 7616991099 - Other than elsewhere specified. Also classified in accordance with: Chapter 76 General Note (D) Subheading Notes 1(a) and (b) to Chapter 76 Section XV Note 5(a) Harmonised System Explanatory Notes (HSENs) to 7616.

  • UK 7616991099 Valid Sep 15, 2026 to Sep 14, 2029 · Ruling 600016136 on GOV.UK

    Sacrificial anodes with steel core and cast to DNV specification. Composition material is Cast aluminium alloy. The Length 267 x Width 440.2 x Height 133.6 – 16.2 Kg each. Aluminium 94 – 97.5% Zinc: 2.5 – 5.75% Indium: 0.015-0.04% Cu: 0.003% Si: 0.12% Fe: 0.09% The material is used as a sacrificial anode to prevent corrosion of steel structures. Aluminium sacrificial anodes are blocks of special metal used to stop ships, offshore structures, and pipelines from rusting in seawater. Mixing the metal - Pure aluminium is melted in a large furnace. Small amounts of other metals are added to give it the right protective properties. A steel bar or insert is placed inside a mould. This allows the anode to be attached to the structure it will protect. The melted aluminium mixture is poured into the mould around the steel core. The metal is left to cool and harden. Once solid, it is removed from the mould and any rough edges are cleaned up. Each anode is checked to make sure it has the correct metal mix, weight, and shape. The finished anodes are labelled and sent out to be fitted onto ships, offshore platforms, or pipelines, where they slowly corrode instead of the main structure protecting it from rust. A sacrificial anode works by corroding preferentially to the protected metal because it is more reactive, supplying electrons that prevent the steel from oxidizing. As a result, the anode gradually corrodes while the steel remains protected. Designed for cathodic protection Usually packed in crates.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) GIR 1 has been used to classify this product by the terms of heading 7616 - Other articles of aluminium. GIR 5(b) has been used to identify the type of packaging. GIR 6 - has been used to classify the goods to subheading level 761699 - Other. 8 Digit Code 76169910 - Cast 10 Digit Code - 7616991099 - Other than elsewhere specified. Also classified in accordance with: Chapter 76 General Note (D) Subheading Notes 1(a) and (b) to Chapter 76 Section XV Note 5(a) Harmonised System Explanatory Notes (HSENs) to 7616.

  • UK 7616991099 Valid Sep 14, 2026 to Sep 13, 2029 · Ruling 600016137 on GOV.UK

    Sacrificial Anodes with steel core and cast to DNV specification. Composition material is Cast aluminium alloy. The Length 216.3 x Width 394.0 x Height 283.0 – 26.7 Kg each. Aluminium 94 – 97.5% Zinc: 2.5 – 5.75% Indium: 0.015-0.04% Cu: 0.003% Si: 0.12% Fe: 0.09% The material is used as a sacrificial anode to prevent corrosion of steel structures. Aluminium sacrificial anodes are blocks of special metal used to stop ships, offshore structures, and pipelines from rusting in seawater. Mixing the metal - Pure aluminium is melted in a large furnace. Small amounts of other metals are added to give it the right protective properties. A steel bar or insert is placed inside a mould. This allows the anode to be attached to the structure it will protect. The melted aluminium mixture is poured into the mould around the steel core. The metal is left to cool and harden. Once solid, it is removed from the mould and any rough edges are cleaned up. Each anode is checked to make sure it has the correct metal mix, weight, and shape. The finished anodes are labelled and sent out to be fitted onto ships, offshore platforms, or pipelines, where they slowly corrode instead of the main structure protecting it from rust. A sacrificial anode works by corroding preferentially to the protected metal because it is more reactive, supplying electrons that prevent the steel from oxidizing. As a result, the anode gradually corrodes while the steel remains protected. Designed for cathodic protection Usually packed in crates.

    Justification

    Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) GIR 1 has been used to classify this product by the terms of heading 7616 - Other articles of aluminium. GIR 5(b) has been used to identify the type of packaging. GIR 6 - has been used to classify the goods to subheading level 761699 - Other. 8 Digit Code 76169910 - Cast 10 Digit Code - 7616991099 - Other than elsewhere specified. Also classified in accordance with: Chapter 76 General Note (D) Subheading Notes 1(a) and (b) to Chapter 76 Section XV Note 5(a) Harmonised System Explanatory Notes (HSENs) to 7616.

Source: HM Revenue & Customs, Advance Tariff Rulings. Contains public sector information licensed under the Open Government Licence v3.0.

Restrictions and flags for 7616991091

  • CBAM: carbon border adjustment Regulation (EU) 2023/956, Annex I 7616

    Sector: aluminium

    Read the act on EUR-Lex
  • Dual-use goods Regulation (EU) 2021/821, Annex I 76169910

    May be dual-use; check the Annex I entry 1A006b (correlation table is non-binding)

    Read the act on EUR-Lex

For orientation only. Check the act before you rely on a flag; thresholds, derogations and exceptions are not shown in full. The dual-use table links codes to control list entries and is non-binding.

Tariff quotas for 7616991091

  • Open 09.6006 Origin: United Kingdom

    Aluminium products and articles of aluminium (excluding aluminium wire and aluminium foil) Aluminium wire Aluminium foil New description from 1/01/2027: Aluminium bars, rods and profiles; Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm; Aluminium foil

    Jan 1, 2026 – Dec 31, 2026

    67,854,080 Kilograms
    Balance left (94.2%)
    Volume 72,000,000

Source: European Commission, tariff quota reports, as of Oct 30, 2026. Balances change daily.

EU trade in 2025 for 7616991091

Extra-EU imports
€438.1M
45,339 t
Extra-EU exports
€535.2M

Top origin countries by import value

  1. China €230.2M
  2. Türkiye €77.5M
  3. United States €27.1M
  4. United Kingdom €19.9M
  5. India €16.6M

Figures for CN8 code 76169910. Source: Eurostat, Comext, CC BY 4.0, processed by hscode.info. Confidential trade is not allocated to codes.

UK import duty for 761699

  • 6%

Third-country duties of all UK commodity codes under this HS subheading. Source: UK Department for Business and Trade, as of Nov 2, 2026. The UK tariff differs from the EU tariff.

Import VAT in the EU

  • Austria 20 %
  • Belgium 21 %
  • Bulgaria 20 %
  • Croatia 25 %
  • Cyprus 19 %
  • Czechia 21 %
  • Denmark 25 %
  • Estonia 24 %
  • Finland 25.5 %
  • France 20 %
  • Germany 19 %
  • Greece 24 %
  • Hungary 27 %
  • Ireland 23 %
  • Italy 22 %
  • Latvia 21 %
  • Lithuania 21 %
  • Luxembourg 17 %
  • Malta 18 %
  • Netherlands 21 %
  • Poland 23 %
  • Portugal 23 %
  • Romania 21 %
  • Slovakia 23 %
  • Slovenia 22 %
  • Spain 21 %
  • Sweden 25 %

Standard rate per member state, on the customs value, the duty and transport to the destination. Reduced rates often depend on the use or the buyer and apply only where the country provides them for these goods. Source: European Commission, Taxes in Europe Database, as of Nov 2, 2026.

Rules of origin

Preferential rules of origin for subheading 761699 depend on the trade agreement. The Commission publishes them in Access2Markets.

Rules of origin on Access2Markets

Information

When importing or exporting "Other", it is crucial to have the correct HS code or TARIC code. The HS code 7616991091 10 serves as the standard code for this product, ensuring that the appropriate duties and taxes are applied when crossing international borders.

To ensure your business transactions run smoothly when importing or exporting "Other", consider the following points:

  1. Inform yourself about the specific import and export regulations in the countries involved. This includes possible restrictions, taxes, and duties applicable to "Other".
  2. Check if any additional licenses, permits, or certificates are required to import "Other" into the destination country or export it from the country of origin.
  3. Make sure your trading partners have valid identification numbers, such as EORI numbers (Economic Operators Registration and Identification) in the EU, to streamline trade and minimize delays.
  4. Ensure that all trade- and customs-related documents (such as commercial invoices, packing lists, certificates of origin, and insurance policies) are accurately completed and adhere to the respective national regulations.
  5. Keep an eye on the current exchange rates, as well as packaging, shipping, and insurance costs, to accurately calculate trade costs.

In summary, the HS code or TARIC code for "Other" is 7616991091 10. Make sure you accurately use this code in all your trade and customs documents to guarantee smooth and hassle-free transactions. With these tips, you'll be better prepared for the challenges of international trade and can successfully import and export "Other".

HS Code structure

76
Chapter
16
Heading
99
Subheading
10
CN Subheading
91
TARIC Subheading
10
Additional TARIC codes

1. Chapter

There are 21 different sections, which are divided into 96 chapters. Exceptional chapters include chapter 77, which is reserved for future use, chapters 98 and 99, which are limited at national level, and chapter 99, which is a specific code for temporary changes. In the example above, chapter 76 was selected for aluminium and articles thereof

2. Heading

The heading determines the specific category within a certain chapter. In the example above, the 16 refers to Other articles of aluminium.

3. Subheading

The last two digits of the international harmonized code are more specific and define subcategories of products. In the example above, the 99 refers to Other.

HS Code tree structure

7600000000 80

Chapter ALUMINIUM AND ARTICLES THEREOF

7616000000 80

Other articles of aluminium

7616100000 80

- Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles

7616100010 80

- - Self-locking bolts and nuts (of the type Hi-lok)

7616100091 10

- - Other

7616100091 80

- - - For use in certain types of aircraft

7616100099 80

- - - Other

7616910000 10

- Other

7616910000 80

- - Cloth, grill, netting and fencing, of aluminium wire

7616990000 80

- - Other

7616991000 80

- - - Cast

7616991010 80

- - - - Collars, flanges and other devices for fixing, jointing, clamping or spacing, for use in certain types of aircraft

7616991020 80

- - - - Quick change apparatus for transforming passenger transport aeroplanes into goods transport aeroplanes and vice versa, for use in certain types of aircraft

7616991091 10

- - - - Other

7616991091 80

- - - - - Aluminium radiators and elements or sections of which such radiator is composed, whether or not such elements are assembled in blocks

7616991099 80

- - - - - Other

7616999000 80

- - - Other

7616999001 10

- - - - Hand-made

7616999001 80

- - - - - Aluminium radiators and elements or sections of which such radiator is composed, whether or not such elements are assembled in blocks

7616999009 80

- - - - - Other

7616999015 10

- - - - Other

7616999020 80

- - - - - Quick change apparatus for transforming passenger transport aeroplanes into goods transport aeroplanes and vice versa, for use in certain types of aircraft

7616999030 80

- - - - - Plates and sheets of variable thickness of widths of 1 200 mm or more, for use in certain types of aircraft

7616999070 80

- - - - - Connecting components for use in the production of helicopter tail rotor shafts

7616999077 80

- - - - - Television pedestal stands with or without bracket for fixation to and stabilization of television cabinet case/body

7616999091 10

- - - - - Other

7616999091 80

- - - - - - Aluminium radiators and elements or sections of which such radiator is composed, whether or not such elements are assembled in blocks

7616999099 80

- - - - - - Other